May 2018 - openSUSE Build Service - openSUSE Mailing Lists

[opensuse-buildservice] OBS Appliance - Unable to Update
by Khalil Graves 15 Apr '19

15 Apr '19

I am running OBS Appliance 2.8.2 on VMware ESX. When the appliance boots I get an error "Failed to start LSB: Finds the storage device to be used for OBS server and/or worker." I have included a dump of systemctl status obsstoagesetup.service below. I Just want to confirm if this is normal or should be addressed. I also attempted and update of a clone of my appliance via zypper but 2 GB root drive is not sufficient for upgrades. Update begins but end with "Error Code: Write Error". I checked root drive and it was up to 100% utilization from 93% prior to update. I decided to install latest version of OBS appliance over existing install. New appliance adopts my old setting but now I am getting and error on boot "Failed to start LSB: open build service source service server." In addition I am unable to build rpms in this current state. Not sure what to do next to get the cloned appliance to build a package. SYSTEMCTL status obsstoragesetup.service obsstoragesetup.service - LSB: Finds the storage device to be used for OBS server and/or worker Loaded: loaded (/etc/init.d/obsstoragesetup; bad; vendor preset: disabled) Active: failed (Result: exit-code) since Tue 2018-03-06 18:44:59 UTC; 16min ago Docs: man:systemd-sysv-generator(8) Process: 1365 ExecStart=/etc/init.d/obsstoragesetup start (code=exited, status=1/FAILURE) Mar 06 18:44:59 linux obsstoragesetup[1365]: OBS_SERVER_SIZE=38912 Mar 06 18:44:59 linux obsstoragesetup[1365]: TOTAL_SWAP_SIZE=1024 Mar 06 18:44:59 linux obsstoragesetup[1365]: FINAL_VG_SIZE = 12284 - 38912 - 25600 - 1024 Mar 06 18:44:59 linux obsstoragesetup[1365]: FINAL_VG_SIZE=-53252 Mar 06 18:44:59 linux obsstoragesetup[1365]: OBS_WORKER_ROOT_SIZE=-26626 Mar 06 18:44:59 linux obsstoragesetup[1365]: MIN_WORKER_ROOT_SIZE=4096 Mar 06 18:44:59 linux systemd[1]: obsstoragesetup.service: Control process exited, code=exited status=1 Mar 06 18:44:59 linux systemd[1]: Failed to start LSB: Finds the storage device to be used for OBS server and/or worker. Mar 06 18:44:59 linux systemd[1]: obsstoragesetup.service: Unit entered failed state. Mar 06 18:44:59 linux systemd[1]: obsstoragesetup.service: Failed with result 'exit-code'. SYSTEMCTL status obsservice.service obsservice.service - LSB: open build service source service server Loaded: loaded (/etc/init.d/obsservice; bad; vendor preset: disabled) Active: failed (Result: exit-code) since Fri 2018-03-09 11:59:39 UTC; 3min 34s ago Docs: man:systemd-sysv-generator(8) Process: 1761 ExecStart=/etc/init.d/obsservice start (code=exited, status=7) Mar 09 11:59:38 linux systemd[1]: Starting LSB: open build service source service server... Mar 09 11:59:39 linux startproc[1788]: startproc: exit status of parent of /usr/lib/obs/server/bs_service: 13 Mar 09 11:59:39 linux obsservice[1761]: Initializing obsservice..failed Mar 09 11:59:39 linux systemd[1]: obsservice.service: Control process exited, code=exited status=7 Mar 09 11:59:39 linux systemd[1]: Failed to start LSB: open build service source service server. Mar 09 11:59:39 linux systemd[1]: obsservice.service: Unit entered failed state. Mar 09 11:59:39 linux systemd[1]: obsservice.service: Failed with result 'exit-code'. '. -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-buildservice+owner(a)opensuse.org

2 4

[opensuse-buildservice] OBS + GitHub - deprecation of GitHub Services
by Linux Kamarada 19 Mar '19

19 Mar '19

Hello, guys! I searched how to integrate OBS with GitHub so that a git push would cause OBS to fetch the source code and build. I followed directions on these pages: https://openbuildservice.org/2013/11/22/source-update-via_token/ https://github.com/seccubus/obs_autobuild_test (CC their authors, thank you for the great material!) But when I opened GitHub's Integration & services to add the Obs service, I read this: "Note: [GitHub Services are being deprecated][1]. Please contact your integrator for more information on how to migrate or replace a service with [webhooks][2] or [GitHub Apps][3]." [1]: https://developer.github.com/changes/2018-04-25-github-services-deprecation/ [2]: https://developer.github.com/webhooks/ [3]: https://developer.github.com/apps/differences-between-apps/#about-github-ap… The news is from April 25, 2018. The first paragraph summarizes it: "GitHub plans on shutting down GitHub Services so we can shift focus to other areas of the API, such as strengthening GitHub Apps and GraphQL, and improving webhooks. The intention of GitHub Services was to allow third-party developers to submit code for integrating with their services, but this functionality has been superseded by GitHub Apps and webhooks. GitHub Services has not supported new features since April 25, 2016, and we plan to officially deprecate it on October 1st, 2018." Although I successfully integrated OBS with GitHub using a GitHub Service, is it already possible to do that same integration using GitHub Apps or webhooks? Thank you! Antonio The Linux Kamarada Project http://kamarada.github.io/ -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-buildservice+owner(a)opensuse.org

7 12

[opensuse-buildservice] tumbleweed refreshes since [18-Aug-2017] and [hosts unreachable ] on [ http://ftp5.gwdg.de and http://download.opensuse.org ]
by doiggl＠velocitynet.com.au 09 Aug '18

09 Aug '18

Hello, Hosts http://ftp5.gwdg.de and http://download.opensuse.org unreachable tumbleweed refreshes since [18-Aug-2017] and cannot get to [ http://ftp5.gwdg.de or http://download.opensuse.org] I tried following: [no response from] # ping http://download.opensuse.org ping: unknown host http://download.opensuse.org # ping http://ftp5.gwdg.de ping: unknown host http://ftp5.gwdg.de http://ftp.gwdg.de/pub/opensuse/tumbleweed/repo/oss/suse/repodata ping http://download.opensuse.org ping: unknown host http://download.opensuse.org -I tried to ping google.com -seems ok # ping google.com PING google.com (172.217.25.142) 56(84) bytes of data. 64 bytes from syd15s03-in-f14.1e100.net (172.217.25.142): icmp_seq=1 ttl=52 time=19.4 ms 64 bytes from syd15s03-in-f14.1e100.net (172.217.25.142): icmp_seq=2 ttl=52 time=19.8 ms 64 bytes from syd15s03-in-f14.1e100.net (172.217.25.142): icmp_seq=3 ttl=52 time=19.9 ms 64 bytes from syd15s03-in-f14.1e100.net (172.217.25.142): icmp_seq=4 ttl=52 time=20.1 ms 64 bytes from syd15s03-in-f14.1e100.net (172.217.25.142): icmp_seq=5 ttl=52 time=19.5 ms ^C --- google.com ping statistics --- 5 packets transmitted, 5 received, 0% packet loss, time 4005ms rtt min/avg/max/mdev = 19.480/19.790/20.153/0.287 ms Also: Are there any updates to tumbleweed since 18-Aug-2017 I do not see any updates on mirrors since then. Tried mirrors on: [has date details on] http://sfo-korg-mirror.kernel.org/opensuse/tumbleweed/repo/oss/suse/repodat… [local time is] # date Mon Aug 21 15:00:25 EST 2017 Cheers --Glenn -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-buildservice+owner(a)opensuse.org

3 4

[opensuse-buildservice] Keys missing for Fedora 25/26/27 and Rawhide
by Johannes Kastl 24 Jun '18

24 Jun '18

Hi guys, can it be that the public keys for Fedora 25/26/27 and Rawhide are not setup correctly on the OBS? I get "public key not available" errors when building locally. Not sure if this is a local issue or to be fixed on the OBS, because I find mails stating both... Kind Regards, Johannes

6 10

[opensuse-buildservice] issue with OBS certificates
by Werner Flamme 31 May '18

31 May '18

Hi, this morning, I get warnings that the file repomd.xml from some repos has been signed with an unknown key. devel_languages_go AF4CFE4D307D7BF9 devel_languages_python 27163A4EEDF0D733 devel_languages_ruby_extensions 9AF0C9A20E9AF123 devel_tools_scm 30A8343A498D5A23 network 62EB1A0917280DDF Packman 45A1D0671ABD1AFB What's gone wrong? Did I miss something? The repo's URLs all start with <http://download.opensuse.org/repositories/>, and there are several repos that have their repomd.xml signed with the usual key. BTW, I'm not asked to accept a changed key for the repos, so the repo keys should be unchanged, just those files have been signed with other keys. Werner --

2 1

[opensuse-buildservice] Should OBS always unconditionally use lint?
by Nicholas Brown 30 May '18

30 May '18

Hi All, In OBS at: https://github.com/openSUSE/open-build-service/blob/master/src/backend/bs_w… the '--lint' option is unconditionally always passed to the 'build' command: push @args, '--lint'; And in the build command at: https://github.com/openSUSE/obs-build/blob/master/build#L1214 this results in 'rpmlint-Factory' being unconditionally added to $ADDITIONAL_PACKS test -z "$DO_LINT" || ADDITIONAL_PACKS="$ADDITIONAL_PACKS rpmlint-Factory" This will be case even for non rpm builds, such as Debian .dsc builds, and for target rpm distribution repositories that might have or support this additional package such Fedora. This seems clearly wrong. This will result in an invocation like: /bin/bash /usr/lib/build/init_buildsystem --configdir /usr/lib/build/configs --cachedir /var/cache/build --rpmlist /var/tmp/osc-buildpackage/rpmlist.nRE0pS /var/tmp/osc-buildpackage/my_package_1.2.3.dsc rpmlint-Factory (init_build appears to ignore the rpmlint-Factory argument, thought I'm not sure specifically why as I'm don't understand how init_build and expanddeps work, but it's clearly wrong to pass rpmlint-Factory to .dsc build targeting a Debian distribution repository) Should the above $DO_LINT test also test $BUILDTPYE to make sure it's a .spec build? (And thus not add the additional package for .dsc builds) Going even further should the '--lint' option perhaps be removed from the build command, and OBS not set this? It seems that simply using 'Support: rpmlint-Factory' in the prjconf for those projects that want and can use this would be the appropriate way to control this. (It appears the actual invocation of 'rpmlint' for .spec builds is controlled by '$DO_CHECKS' and passing '--nochecks') Thanks, Nick -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-buildservice+owner(a)opensuse.org

2 4

[opensuse-buildservice] Builds not working?
by Giovanni Santini 29 May '18

29 May '18

Good evening there, I have noticed that builds for my repository are stuck to 2 days ago. Using `osc rbuild PACKAGE` doesn't work too. My repository is: home:ItachiSan:archlinux Is this a known problem (server maintenance?) or should I report it? Regards -- Giovanni Santini My blog: http://giovannisantini.tk My code: https://git{hub,lab}.com/ItachiSan My GPG: 2FADEBF5 -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-buildservice+owner(a)opensuse.org

5 8

[opensuse-buildservice] forcing build-compare after pkg build
by Olaf Hering 28 May '18

28 May '18

Is there a way to force the usage of build-compare for all pkgs in a prj? According to the buildlog build-compare gets installed, but at the end of the build it is not used. That behavior is probably cool for bootstrap, but bad for everything else. Olaf

3 8

[opensuse-buildservice] Building with EPEL packages
by David Adam 19 May '18

19 May '18

Hi, Is there any way to build RedHat/CentOS packages with build dependencies pulled in from EPEL on the openSUSE OBS? I see the answer has been no in the past [1][2][3][4], but in 2014 there was some suggestion that the Download-on-Demand support might make this easier. The reason I'm not just copying the SRPMs and rebuilding them is that the available version of CMake requires a newer CMake than is available in RHEL/CentOS 5/6 to build, so I haven't worked how to bootstrap it properly yet - perhaps I will need an intermediate version from an older release of EPEL. Thanks David Adam zanchey(a)ucc.gu.uwa.edu.au [1]: https://forums.opensuse.org/showthread.php/522009-How-to-give-CentOS-builds… [2]: https://forums.opensuse.org/showthread.php/472286-Adding-External-Build-Dep… [3]: http://comments.gmane.org/gmane.linux.suse.opensuse.buildservice/21414 [4]: https://lists.opensuse.org/opensuse-buildservice/2011-11/msg00142.html -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-buildservice+owner(a)opensuse.org

2 4

[opensuse-buildservice] Problems with aarch64 buildhost[s]
by Harald Welte 17 May '18

17 May '18

Dear OBS community, from last night onwards pretty much all of our aarch64 builds are failing due to what appears to be some serious problems on the buildhost (see attached mails with log snippets). among the "interesting" messages are: [ 328s] [ 291.436030] dracut-initqueue[468]: Warning: Could not boot. [ 347s] qemu-system-aarch64: terminating on signal 15 from pid 38856 (fuser) [ 340s] dracut:/# ### WATCHDOG TRIGGERED, KILLING VM ### [ 18s] objdump: /boot/Image.guest: File format not recognized [ 322s] Warning: /dev/disk/by-uuid/00750419-b769-40be-aa7a-a81dca13c577 does not exist This is not critical for us, but I guess somebody will want to have a look at this at some point :) Thanks! Regards, Harald -- - Harald Welte <laforge(a)gnumonks.org> http://laforge.gnumonks.org/ ============================================================================ "Privacy in residential applications is a desirable marketing option." (ETSI EN 300 175-7 Ch. A6)

2 2

[opensuse-buildservice] [Arch] gcc is broken
by Giovanni Santini 15 May '18

15 May '18

Good evening, I am having a problem building a package with gcc on OBS Arch image. The package is just a `./configure; make; make install` one, although it doesn't work because within the Arch chroot something is broken. The important part of the failed configuration log is the following: configure:2941: checking whether the C++ compiler works configure:2963: g++ -march=x86-64 -mtune=generic -O2 -pipe -fstack-protector-strong -fno-plt -D_FORTIFY_SOURCE=2 -Wl,-O1,--sort-common,--as-needed,-z,relro,-z,now conftest.cpp >&5 /usr/bin/ld: /usr/lib/libc.so.6: version `GLIBC_2.27' not found (required by /usr/bin/ld) collect2: error: ld returned 1 exit status I am not sure which fixtures has the Arch chroot, but I believe this should not happen. By using the official chroot tool provided by Arch this issue does not arise. If needed I can attach the *config.log* generated by `./configure`. -- Giovanni Santini My blog: http://giovannisantini.tk My code: https://git{hub,lab}.com/ItachiSan My GPG: 2FADEBF5 -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-buildservice+owner(a)opensuse.org

2 2

[opensuse-buildservice] QEMU Error
by Steve Hertz 15 May '18

15 May '18

I have running projects on older versions of the OBS but I decided to start with a freshly installed appliance from 2.8.4. When I try to build the ARM repo I get the following message. [ 1s] [27/28] preinstalling rpm... [ 1s] [28/28] preinstalling pam... [ 1s] [ 1s] running aaa_base preinstall script [ 1s] chroot: failed to run command 'sh': No such file or directory [ 1s] running aaa_base postinstall script [ 1s] chroot: failed to run command 'sh': No such file or directory [ 1s] initializing rpm db... [ 1s] chroot: failed to run command '/usr/bin/rpmdb': No such file or directory [ 1s] I've looked at many reports about this issue but I didn't see any resolution. I'm using a very simple package for testing that works for i586, x86_64. ARM Repo <repository name="qemu"> <path project="openSUSE.org:openSUSE:Factory:ARM" repository="standard"/> <arch>armv7l</arch> <arch>aarch64</arch> </repository> IA repo <repository name="qemu_accel" rebuild="local" block="local"> <path project="openSUSE.org:openSUSE:Factory" repository="standard"/> <arch>x86_64</arch> </repository> Steve --- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-buildservice+owner(a)opensuse.org

2 2

[opensuse-buildservice] Centos 7 x86_64, missing binutils/ld
by Andreas Baumann 15 May '18

15 May '18

Hi, For instance on https://build.opensuse.org/package/live_build_log/home:andreas_baumann/geng… [ 66s] collect2: fatal error: cannot find 'ld' [ 66s] compilation terminated. Greetings Andreas -- Andreas Baumann Trottenstrasse 20 CH-8037 Zuerich Telefon: +41(0)76/373 01 29 E-mail: mail(a)andreasbaumann.cc Homepage: www.andreasbaumann.cc

6 8

[opensuse-buildservice] Adding openSUSE:Leap:15.0:Update/ports breaks x86_64 dependencies
by Oliver Kurz 15 May '18

15 May '18

It seems a project config like ``` <repository name="openSUSE_Leap_15.0_update+ports"> <path project="openSUSE:Leap:15.0:Update" repository="standard"/> <path project="openSUSE:Leap:15.0:Update" repository="ports"/> <arch>x86_64</arch> <arch>ppc64le</arch> </repository> ``` causes a problem that no package dependencies for the x86_64 build can be found. Please see the example project https://build.opensuse.org/package/show/home:okurz:test-leap15-update/test-… showing this problem. It also shows all other combinations that work, e.g. using only the GM repositories, using :Update for x86_64 only without ports, using Leap 42.3, etc. Is this a generic OBS problem or Leap 15.0 specific? Is there a best practice how to handle? -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-buildservice+owner(a)opensuse.org

2 1

[opensuse-buildservice] SLE-15 module setup on OBS
by Jimmy Berry 11 May '18

11 May '18

OpenSUSE:Tools/openSUSE-release-tools fails to resolve for SLE_15 repo: > nothing provides python-cmdln, nothing provides python-colorama This same problem previously that occurred with SLE_12_SP3 and was resolved by including all modules or some-such on OBS side. >From what I can tell it looks like a bunch of modules are included in SLE-15 setup. Any idea what is missing as the packages are definitely in SLE-15. -- Jimmy -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-buildservice+owner(a)opensuse.org

2 3

[opensuse-buildservice] Key for private ubuntu repo with hash >= sha256
by Shazo 10 May '18

10 May '18

Hello, need help. Have a problem with gpg keys for my private repo. I need one key for all ubuntu repositories and hash algo >=sha256. When publish projects in obs-server, they are signed with a key (example key below). The key is the algorithm rsa (algo 1) and encryption sha256 (digest algo 8). But when publish packages, hosts with OS ubuntu 16.04, warn that the key has a sha1 cipher: "Signature by key 167F971DD45E6807EF611BB1A18A8926E4050125 uses weak digest algorithm (SHA1)" The problem is solved if I create a separate key for the project. osc signkey --create certbot obs_admin --republish-repository certbot Ubuntu_16.04_standard But I need one key for all the repositories. How can I solve this? Created key example: gpg2 --list-packets /srv/obs/obs-default-gpg.asc :public key packet: version 4, algo 1, created 1525702323, expires 0 pkey[0]: [4096 bits] pkey[1]: [17 bits] keyid: 00AAADA57778C8B1 :user ID packet: "private OBS (key without passphrase) <defaultkey@localobs > " :signature packet: algo 1, keyid 00AAADA57778C8B1 version 4, created 1525702323, md5len 0, sigclass 0x13 digest algo 8, begin of digest 80 f8 hashed subpkt 2 len 4 (sig created 2018-05-07) hashed subpkt 27 len 1 (key flags: 2F) hashed subpkt 11 len 4 (pref-sym-algos: 9 8 7 3) hashed subpkt 21 len 4 (pref-hash-algos: 10 9 8 11) hashed subpkt 22 len 4 (pref-zip-algos: 2 3 1 0) hashed subpkt 30 len 1 (features: 01) hashed subpkt 23 len 1 (key server preferences: 80) subpkt 16 len 8 (issuer key ID 00AAADA57778C8B1) data: [4096 bits] :public sub key packet: version 4, algo 1, created 1525702323, expires 0 pkey[0]: [4096 bits] pkey[1]: [17 bits] keyid: A18A8926E4050125 :signature packet: algo 1, keyid 00AAADA57778C8B1 version 4, created 1525702323, md5len 0, sigclass 0x18 digest algo 8, begin of digest e6 30 hashed subpkt 2 len 4 (sig created 2018-05-07) hashed subpkt 27 len 1 (key flags: 2E) subpkt 16 len 8 (issuer key ID 00AAADA57778C8B1) subpkt 32 len 540 (signature: v4, class 0x19, algo 1, digest algo 8) data: [4096 bits] I have installed private installation obs server 2.9.2. Options in BSConfig.pm: our $forceprojectkeys = 1; our $sign_project = 0; our $sign = "/usr/bin/sign"; our $keyfile = "/srv/obs/obs-default-gpg.asc"; -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-buildservice+owner(a)opensuse.org

1 0

[opensuse-buildservice] Introduction of the new OBS Container Registry
by Frank Schreiner 09 May '18

09 May '18

Hi, we are happy to announce our new openSUSE Container Registry: https://registry.opensuse.org for more detailed information see our blog post https://openbuildservice.org/2018/05/09/container-building-and-distribu tion/ Your OBS Team -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-buildservice+owner(a)opensuse.org

1 1

[opensuse-buildservice] osc segfault
by Giovanni Santini 08 May '18

08 May '18

Hello everyone, I was trying to push an update to a package of mine but `osc ci` gives me a segfault which I am not sure how to debug. I am on Arch and I have the tools from the OBS tools official repo. -- Giovanni Santini My blog: http://giovannisantini.tk My code: https://git{hub,lab}.com/ItachiSan My GPG: 2FADEBF5 -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-buildservice+owner(a)opensuse.org

4 6

[opensuse-buildservice] OBS Admin Heads Up CVE-2018-1000156
by Adrian Schröter 07 May '18

07 May '18

Hi OBS Admins, there was an unexpected feature to many in the "patch" util, which could be used to execute scripts. So your OBS instance is affected by that as well, since there is an old feature which allows to apply patches via _link files. So it was possible to execute code on your source server via ed-script crafted patches. Please be sure that you installed the latest distributions updates for CVE-2018-1000156 (bsc#1088420, savannah#53566) for the "patch" utils. They should be out for all SUSE platforms. bye adrian -- Adrian Schroeter email: adrian(a)suse.de SUSE Linux GmbH, GF: Felix Imendörffer, Jane Smithard, Graham Norton, HRB 21284 (AG Nürnberg) Maxfeldstraße 5 90409 Nürnberg Germany -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-buildservice+owner(a)opensuse.org

1 0