March 2018 - openSUSE Build Service - openSUSE Mailing Lists

[opensuse-buildservice] OBS Appliance - Unable to Update
by Khalil Graves 15 Apr '19

15 Apr '19

I am running OBS Appliance 2.8.2 on VMware ESX. When the appliance boots I get an error "Failed to start LSB: Finds the storage device to be used for OBS server and/or worker." I have included a dump of systemctl status obsstoagesetup.service below. I Just want to confirm if this is normal or should be addressed. I also attempted and update of a clone of my appliance via zypper but 2 GB root drive is not sufficient for upgrades. Update begins but end with "Error Code: Write Error". I checked root drive and it was up to 100% utilization from 93% prior to update. I decided to install latest version of OBS appliance over existing install. New appliance adopts my old setting but now I am getting and error on boot "Failed to start LSB: open build service source service server." In addition I am unable to build rpms in this current state. Not sure what to do next to get the cloned appliance to build a package. SYSTEMCTL status obsstoragesetup.service obsstoragesetup.service - LSB: Finds the storage device to be used for OBS server and/or worker Loaded: loaded (/etc/init.d/obsstoragesetup; bad; vendor preset: disabled) Active: failed (Result: exit-code) since Tue 2018-03-06 18:44:59 UTC; 16min ago Docs: man:systemd-sysv-generator(8) Process: 1365 ExecStart=/etc/init.d/obsstoragesetup start (code=exited, status=1/FAILURE) Mar 06 18:44:59 linux obsstoragesetup[1365]: OBS_SERVER_SIZE=38912 Mar 06 18:44:59 linux obsstoragesetup[1365]: TOTAL_SWAP_SIZE=1024 Mar 06 18:44:59 linux obsstoragesetup[1365]: FINAL_VG_SIZE = 12284 - 38912 - 25600 - 1024 Mar 06 18:44:59 linux obsstoragesetup[1365]: FINAL_VG_SIZE=-53252 Mar 06 18:44:59 linux obsstoragesetup[1365]: OBS_WORKER_ROOT_SIZE=-26626 Mar 06 18:44:59 linux obsstoragesetup[1365]: MIN_WORKER_ROOT_SIZE=4096 Mar 06 18:44:59 linux systemd[1]: obsstoragesetup.service: Control process exited, code=exited status=1 Mar 06 18:44:59 linux systemd[1]: Failed to start LSB: Finds the storage device to be used for OBS server and/or worker. Mar 06 18:44:59 linux systemd[1]: obsstoragesetup.service: Unit entered failed state. Mar 06 18:44:59 linux systemd[1]: obsstoragesetup.service: Failed with result 'exit-code'. SYSTEMCTL status obsservice.service obsservice.service - LSB: open build service source service server Loaded: loaded (/etc/init.d/obsservice; bad; vendor preset: disabled) Active: failed (Result: exit-code) since Fri 2018-03-09 11:59:39 UTC; 3min 34s ago Docs: man:systemd-sysv-generator(8) Process: 1761 ExecStart=/etc/init.d/obsservice start (code=exited, status=7) Mar 09 11:59:38 linux systemd[1]: Starting LSB: open build service source service server... Mar 09 11:59:39 linux startproc[1788]: startproc: exit status of parent of /usr/lib/obs/server/bs_service: 13 Mar 09 11:59:39 linux obsservice[1761]: Initializing obsservice..failed Mar 09 11:59:39 linux systemd[1]: obsservice.service: Control process exited, code=exited status=7 Mar 09 11:59:39 linux systemd[1]: Failed to start LSB: open build service source service server. Mar 09 11:59:39 linux systemd[1]: obsservice.service: Unit entered failed state. Mar 09 11:59:39 linux systemd[1]: obsservice.service: Failed with result 'exit-code'. '. -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-buildservice+owner(a)opensuse.org

2 4

[opensuse-buildservice] tumbleweed refreshes since [18-Aug-2017] and [hosts unreachable ] on [ http://ftp5.gwdg.de and http://download.opensuse.org ]
by doiggl＠velocitynet.com.au 09 Aug '18

09 Aug '18

Hello, Hosts http://ftp5.gwdg.de and http://download.opensuse.org unreachable tumbleweed refreshes since [18-Aug-2017] and cannot get to [ http://ftp5.gwdg.de or http://download.opensuse.org] I tried following: [no response from] # ping http://download.opensuse.org ping: unknown host http://download.opensuse.org # ping http://ftp5.gwdg.de ping: unknown host http://ftp5.gwdg.de http://ftp.gwdg.de/pub/opensuse/tumbleweed/repo/oss/suse/repodata ping http://download.opensuse.org ping: unknown host http://download.opensuse.org -I tried to ping google.com -seems ok # ping google.com PING google.com (172.217.25.142) 56(84) bytes of data. 64 bytes from syd15s03-in-f14.1e100.net (172.217.25.142): icmp_seq=1 ttl=52 time=19.4 ms 64 bytes from syd15s03-in-f14.1e100.net (172.217.25.142): icmp_seq=2 ttl=52 time=19.8 ms 64 bytes from syd15s03-in-f14.1e100.net (172.217.25.142): icmp_seq=3 ttl=52 time=19.9 ms 64 bytes from syd15s03-in-f14.1e100.net (172.217.25.142): icmp_seq=4 ttl=52 time=20.1 ms 64 bytes from syd15s03-in-f14.1e100.net (172.217.25.142): icmp_seq=5 ttl=52 time=19.5 ms ^C --- google.com ping statistics --- 5 packets transmitted, 5 received, 0% packet loss, time 4005ms rtt min/avg/max/mdev = 19.480/19.790/20.153/0.287 ms Also: Are there any updates to tumbleweed since 18-Aug-2017 I do not see any updates on mirrors since then. Tried mirrors on: [has date details on] http://sfo-korg-mirror.kernel.org/opensuse/tumbleweed/repo/oss/suse/repodat… [local time is] # date Mon Aug 21 15:00:25 EST 2017 Cheers --Glenn -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-buildservice+owner(a)opensuse.org

3 4

[opensuse-buildservice] Keys missing for Fedora 25/26/27 and Rawhide
by Johannes Kastl 24 Jun '18

24 Jun '18

Hi guys, can it be that the public keys for Fedora 25/26/27 and Rawhide are not setup correctly on the OBS? I get "public key not available" errors when building locally. Not sure if this is a local issue or to be fixed on the OBS, because I find mails stating both... Kind Regards, Johannes

6 10

[opensuse-buildservice] Building with EPEL packages
by David Adam 19 May '18

19 May '18

Hi, Is there any way to build RedHat/CentOS packages with build dependencies pulled in from EPEL on the openSUSE OBS? I see the answer has been no in the past [1][2][3][4], but in 2014 there was some suggestion that the Download-on-Demand support might make this easier. The reason I'm not just copying the SRPMs and rebuilding them is that the available version of CMake requires a newer CMake than is available in RHEL/CentOS 5/6 to build, so I haven't worked how to bootstrap it properly yet - perhaps I will need an intermediate version from an older release of EPEL. Thanks David Adam zanchey(a)ucc.gu.uwa.edu.au [1]: https://forums.opensuse.org/showthread.php/522009-How-to-give-CentOS-builds… [2]: https://forums.opensuse.org/showthread.php/472286-Adding-External-Build-Dep… [3]: http://comments.gmane.org/gmane.linux.suse.opensuse.buildservice/21414 [4]: https://lists.opensuse.org/opensuse-buildservice/2011-11/msg00142.html -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-buildservice+owner(a)opensuse.org

2 4

[opensuse-buildservice] Branched package meta configuration
by Sean Marlow 30 Mar '18

30 Mar '18

Hi all, When you branch a package to your home project in OBS the repository information in meta configuration is copied. However, the build settings are not copied by default. Is there way to branch a package while maintaining the build configuration? Looking at osc branch there's an option `--add-repositories` which mentions, "happens by default when project is new". But I don't see a simliar option for build. Am I overlooking this or is there a way to do so in the web interface? Thanks! -- Sean Marlow Public Cloud Developer sean.marlow(a)suse.com

1 0

[opensuse-buildservice] Build Internet-dependent packages on ArchLinux
by Giovanni Santini 30 Mar '18

30 Mar '18

Hey everyone, I didn't touch OBS for a while (some months) but, as far as I remember, networking was not enabled within the builder; for ArchLinux sources, I could have some tricks (using a donwload service to fetch the sources and patch the PKGBUILD), but it would not work for Node.js/npm based packages. As now I would like to package some software which would use Node.js and pip, I have (I suppose) the same problem again. Is there any *proper* way to handle this? If yes, how? Regards -- Giovanni Santini My blog: http://giovannisantini.tk My code: https://git{hub,lab}.com/ItachiSan My GPG: 2FADEBF5 -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-buildservice+owner(a)opensuse.org

1 0

[opensuse-buildservice] Open Build Service 2.9 released
by Bjoern Geuken 29 Mar '18

29 Mar '18

People of the builds! We are happy to announce the release of our stable code base of Open Build Service (OBS) version 2.9: http://openbuildservice.org/2018/03/19/release_of_obs_2.9/ As a highlight we included the ec2 cloud upload that allows you to upload images to the Amazon Web Services (AWS). More information can be found in our recent blog post: http://openbuildservice.org/2018/03/01/cloud-upload/ Other highlights are the Studio Express feature, an improved workflow for producing appliance images in OBS. A message bus, supported by RabbitMQ, to help you connect your own tools to what is happening inside the OBS. And a much improved notifications system to keep you up to date with OBS. The Full Release Notes ---------------------- For detailed information of the changes we made please have a look into the 2.9 Release Notes: https://github.com/openSUSE/open-build-service/blob/2.9/ReleaseNotes-2.9 It is recommended to read these before updating your OBS instance! Setting up the ec2 cloud uploader --------------------------------- You can find information about how to set up the cloud uploader service in our admin guide: http://openbuildservice.org/help/manuals/obs-admin-guide/obs.cha.installati… Install 2.9 ----------- Please read our setup instructions https://github.com/openSUSE/open-build-service/blob/2.9/README.md#installat… or even better, use our appliance http://download.opensuse.org/repositories/OBS:/Server:/2.9/images/ Update to OBS 2.9 ------------------ In case you update from a previous OBS stable release please read the README.UPDATERS file which comes with this version. https://github.com/openSUSE/open-build-service/blob/2.9/dist/README.UPDATERS OBS Appliance users who have set up their LVM http://openbuildservice.org/download/#appliance_config can just replace their appliance image without data loss. The migration will happen automatically. Your Open Build Service Team PS: In case you wonder about the 2.9.1 version. We messed up the versioning in our beta release. In order to allow you an easy update path from our beta and RC packages we decided to start this release with version 2.9.1;-) -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-buildservice+owner(a)opensuse.org

3 3

[opensuse-buildservice] gcc-c++ not available at build
by Darin Perusich 28 Mar '18

28 Mar '18

Hi, Has gcc-c++ been removed as one of the automatically included dependencies at build time in OBS? A large number of packages in devel:languages:R:released are now failing to build due to g++ no longer being available, and we've changed nothing in the R-base-devel package Requires which they all rely on. Can anyone shed some light on this? -- Later, Darin -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-buildservice+owner(a)opensuse.org

6 7

[opensuse-buildservice] Post-mortem: Downtime on March 23, 2018
by Christian Bruckmayer 27 Mar '18

27 Mar '18

Good evening, as some of you might noticed, we had a downtime of ~25 minutes last Friday. For details what happened exactly, please have a look at our post mortem post: http://openbuildservice.org/2018/03/23/post-mortem-6/ Your Open Build Service Tea -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-buildservice+owner(a)opensuse.org

2 2

[opensuse-buildservice] Building a Python package
by Roger Oberholtzer 27 Mar '18

27 Mar '18

I am trying to build a rather simple python package on OBS. It is the backports of some Python 3 functions for use with Python 2. I thought I would package it like a simple python package. But I guess that's not the way one should package a backport package. I looked at this but just got confused: https://build.opensuse.org/package/show/openSUSE%3ALeap%3A15.0/python-backp… Is there documentation on this? The package I am playing with is https://build.opensuse.org/package/show/home:rogeroberholtzer/python-backpo… -- Roger Oberholtzer -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-buildservice+owner(a)opensuse.org

2 2