March 2018 - openSUSE Build Service - openSUSE Mailing Lists

[opensuse-buildservice] OBS Appliance - Unable to Update
by Khalil Graves 15 Apr '19

15 Apr '19

I am running OBS Appliance 2.8.2 on VMware ESX. When the appliance boots I get an error "Failed to start LSB: Finds the storage device to be used for OBS server and/or worker." I have included a dump of systemctl status obsstoagesetup.service below. I Just want to confirm if this is normal or should be addressed. I also attempted and update of a clone of my appliance via zypper but 2 GB root drive is not sufficient for upgrades. Update begins but end with "Error Code: Write Error". I checked root drive and it was up to 100% utilization from 93% prior to update. I decided to install latest version of OBS appliance over existing install. New appliance adopts my old setting but now I am getting and error on boot "Failed to start LSB: open build service source service server." In addition I am unable to build rpms in this current state. Not sure what to do next to get the cloned appliance to build a package. SYSTEMCTL status obsstoragesetup.service obsstoragesetup.service - LSB: Finds the storage device to be used for OBS server and/or worker Loaded: loaded (/etc/init.d/obsstoragesetup; bad; vendor preset: disabled) Active: failed (Result: exit-code) since Tue 2018-03-06 18:44:59 UTC; 16min ago Docs: man:systemd-sysv-generator(8) Process: 1365 ExecStart=/etc/init.d/obsstoragesetup start (code=exited, status=1/FAILURE) Mar 06 18:44:59 linux obsstoragesetup[1365]: OBS_SERVER_SIZE=38912 Mar 06 18:44:59 linux obsstoragesetup[1365]: TOTAL_SWAP_SIZE=1024 Mar 06 18:44:59 linux obsstoragesetup[1365]: FINAL_VG_SIZE = 12284 - 38912 - 25600 - 1024 Mar 06 18:44:59 linux obsstoragesetup[1365]: FINAL_VG_SIZE=-53252 Mar 06 18:44:59 linux obsstoragesetup[1365]: OBS_WORKER_ROOT_SIZE=-26626 Mar 06 18:44:59 linux obsstoragesetup[1365]: MIN_WORKER_ROOT_SIZE=4096 Mar 06 18:44:59 linux systemd[1]: obsstoragesetup.service: Control process exited, code=exited status=1 Mar 06 18:44:59 linux systemd[1]: Failed to start LSB: Finds the storage device to be used for OBS server and/or worker. Mar 06 18:44:59 linux systemd[1]: obsstoragesetup.service: Unit entered failed state. Mar 06 18:44:59 linux systemd[1]: obsstoragesetup.service: Failed with result 'exit-code'. SYSTEMCTL status obsservice.service obsservice.service - LSB: open build service source service server Loaded: loaded (/etc/init.d/obsservice; bad; vendor preset: disabled) Active: failed (Result: exit-code) since Fri 2018-03-09 11:59:39 UTC; 3min 34s ago Docs: man:systemd-sysv-generator(8) Process: 1761 ExecStart=/etc/init.d/obsservice start (code=exited, status=7) Mar 09 11:59:38 linux systemd[1]: Starting LSB: open build service source service server... Mar 09 11:59:39 linux startproc[1788]: startproc: exit status of parent of /usr/lib/obs/server/bs_service: 13 Mar 09 11:59:39 linux obsservice[1761]: Initializing obsservice..failed Mar 09 11:59:39 linux systemd[1]: obsservice.service: Control process exited, code=exited status=7 Mar 09 11:59:39 linux systemd[1]: Failed to start LSB: open build service source service server. Mar 09 11:59:39 linux systemd[1]: obsservice.service: Unit entered failed state. Mar 09 11:59:39 linux systemd[1]: obsservice.service: Failed with result 'exit-code'. '. -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-buildservice+owner(a)opensuse.org

2 4

[opensuse-buildservice] tumbleweed refreshes since [18-Aug-2017] and [hosts unreachable ] on [ http://ftp5.gwdg.de and http://download.opensuse.org ]
by doiggl＠velocitynet.com.au 09 Aug '18

09 Aug '18

Hello, Hosts http://ftp5.gwdg.de and http://download.opensuse.org unreachable tumbleweed refreshes since [18-Aug-2017] and cannot get to [ http://ftp5.gwdg.de or http://download.opensuse.org] I tried following: [no response from] # ping http://download.opensuse.org ping: unknown host http://download.opensuse.org # ping http://ftp5.gwdg.de ping: unknown host http://ftp5.gwdg.de http://ftp.gwdg.de/pub/opensuse/tumbleweed/repo/oss/suse/repodata ping http://download.opensuse.org ping: unknown host http://download.opensuse.org -I tried to ping google.com -seems ok # ping google.com PING google.com (172.217.25.142) 56(84) bytes of data. 64 bytes from syd15s03-in-f14.1e100.net (172.217.25.142): icmp_seq=1 ttl=52 time=19.4 ms 64 bytes from syd15s03-in-f14.1e100.net (172.217.25.142): icmp_seq=2 ttl=52 time=19.8 ms 64 bytes from syd15s03-in-f14.1e100.net (172.217.25.142): icmp_seq=3 ttl=52 time=19.9 ms 64 bytes from syd15s03-in-f14.1e100.net (172.217.25.142): icmp_seq=4 ttl=52 time=20.1 ms 64 bytes from syd15s03-in-f14.1e100.net (172.217.25.142): icmp_seq=5 ttl=52 time=19.5 ms ^C --- google.com ping statistics --- 5 packets transmitted, 5 received, 0% packet loss, time 4005ms rtt min/avg/max/mdev = 19.480/19.790/20.153/0.287 ms Also: Are there any updates to tumbleweed since 18-Aug-2017 I do not see any updates on mirrors since then. Tried mirrors on: [has date details on] http://sfo-korg-mirror.kernel.org/opensuse/tumbleweed/repo/oss/suse/repodat… [local time is] # date Mon Aug 21 15:00:25 EST 2017 Cheers --Glenn -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-buildservice+owner(a)opensuse.org

3 4

[opensuse-buildservice] Keys missing for Fedora 25/26/27 and Rawhide
by Johannes Kastl 24 Jun '18

24 Jun '18

Hi guys, can it be that the public keys for Fedora 25/26/27 and Rawhide are not setup correctly on the OBS? I get "public key not available" errors when building locally. Not sure if this is a local issue or to be fixed on the OBS, because I find mails stating both... Kind Regards, Johannes

6 10

[opensuse-buildservice] Building with EPEL packages
by David Adam 19 May '18

19 May '18

Hi, Is there any way to build RedHat/CentOS packages with build dependencies pulled in from EPEL on the openSUSE OBS? I see the answer has been no in the past [1][2][3][4], but in 2014 there was some suggestion that the Download-on-Demand support might make this easier. The reason I'm not just copying the SRPMs and rebuilding them is that the available version of CMake requires a newer CMake than is available in RHEL/CentOS 5/6 to build, so I haven't worked how to bootstrap it properly yet - perhaps I will need an intermediate version from an older release of EPEL. Thanks David Adam zanchey(a)ucc.gu.uwa.edu.au [1]: https://forums.opensuse.org/showthread.php/522009-How-to-give-CentOS-builds… [2]: https://forums.opensuse.org/showthread.php/472286-Adding-External-Build-Dep… [3]: http://comments.gmane.org/gmane.linux.suse.opensuse.buildservice/21414 [4]: https://lists.opensuse.org/opensuse-buildservice/2011-11/msg00142.html -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-buildservice+owner(a)opensuse.org

2 4

[opensuse-buildservice] Branched package meta configuration
by Sean Marlow 30 Mar '18

30 Mar '18

Hi all, When you branch a package to your home project in OBS the repository information in meta configuration is copied. However, the build settings are not copied by default. Is there way to branch a package while maintaining the build configuration? Looking at osc branch there's an option `--add-repositories` which mentions, "happens by default when project is new". But I don't see a simliar option for build. Am I overlooking this or is there a way to do so in the web interface? Thanks! -- Sean Marlow Public Cloud Developer sean.marlow(a)suse.com

1 0

[opensuse-buildservice] Build Internet-dependent packages on ArchLinux
by Giovanni Santini 30 Mar '18

30 Mar '18

Hey everyone, I didn't touch OBS for a while (some months) but, as far as I remember, networking was not enabled within the builder; for ArchLinux sources, I could have some tricks (using a donwload service to fetch the sources and patch the PKGBUILD), but it would not work for Node.js/npm based packages. As now I would like to package some software which would use Node.js and pip, I have (I suppose) the same problem again. Is there any *proper* way to handle this? If yes, how? Regards -- Giovanni Santini My blog: http://giovannisantini.tk My code: https://git{hub,lab}.com/ItachiSan My GPG: 2FADEBF5 -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-buildservice+owner(a)opensuse.org

1 0

[opensuse-buildservice] Open Build Service 2.9 released
by Bjoern Geuken 29 Mar '18

29 Mar '18

People of the builds! We are happy to announce the release of our stable code base of Open Build Service (OBS) version 2.9: http://openbuildservice.org/2018/03/19/release_of_obs_2.9/ As a highlight we included the ec2 cloud upload that allows you to upload images to the Amazon Web Services (AWS). More information can be found in our recent blog post: http://openbuildservice.org/2018/03/01/cloud-upload/ Other highlights are the Studio Express feature, an improved workflow for producing appliance images in OBS. A message bus, supported by RabbitMQ, to help you connect your own tools to what is happening inside the OBS. And a much improved notifications system to keep you up to date with OBS. The Full Release Notes ---------------------- For detailed information of the changes we made please have a look into the 2.9 Release Notes: https://github.com/openSUSE/open-build-service/blob/2.9/ReleaseNotes-2.9 It is recommended to read these before updating your OBS instance! Setting up the ec2 cloud uploader --------------------------------- You can find information about how to set up the cloud uploader service in our admin guide: http://openbuildservice.org/help/manuals/obs-admin-guide/obs.cha.installati… Install 2.9 ----------- Please read our setup instructions https://github.com/openSUSE/open-build-service/blob/2.9/README.md#installat… or even better, use our appliance http://download.opensuse.org/repositories/OBS:/Server:/2.9/images/ Update to OBS 2.9 ------------------ In case you update from a previous OBS stable release please read the README.UPDATERS file which comes with this version. https://github.com/openSUSE/open-build-service/blob/2.9/dist/README.UPDATERS OBS Appliance users who have set up their LVM http://openbuildservice.org/download/#appliance_config can just replace their appliance image without data loss. The migration will happen automatically. Your Open Build Service Team PS: In case you wonder about the 2.9.1 version. We messed up the versioning in our beta release. In order to allow you an easy update path from our beta and RC packages we decided to start this release with version 2.9.1;-) -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-buildservice+owner(a)opensuse.org

3 3

[opensuse-buildservice] gcc-c++ not available at build
by Darin Perusich 28 Mar '18

28 Mar '18

Hi, Has gcc-c++ been removed as one of the automatically included dependencies at build time in OBS? A large number of packages in devel:languages:R:released are now failing to build due to g++ no longer being available, and we've changed nothing in the R-base-devel package Requires which they all rely on. Can anyone shed some light on this? -- Later, Darin -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-buildservice+owner(a)opensuse.org

6 7

[opensuse-buildservice] Post-mortem: Downtime on March 23, 2018
by Christian Bruckmayer 27 Mar '18

27 Mar '18

Good evening, as some of you might noticed, we had a downtime of ~25 minutes last Friday. For details what happened exactly, please have a look at our post mortem post: http://openbuildservice.org/2018/03/23/post-mortem-6/ Your Open Build Service Tea -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-buildservice+owner(a)opensuse.org

2 2

[opensuse-buildservice] Building a Python package
by Roger Oberholtzer 27 Mar '18

27 Mar '18

I am trying to build a rather simple python package on OBS. It is the backports of some Python 3 functions for use with Python 2. I thought I would package it like a simple python package. But I guess that's not the way one should package a backport package. I looked at this but just got confused: https://build.opensuse.org/package/show/openSUSE%3ALeap%3A15.0/python-backp… Is there documentation on this? The package I am playing with is https://build.opensuse.org/package/show/home:rogeroberholtzer/python-backpo… -- Roger Oberholtzer -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-buildservice+owner(a)opensuse.org

2 2

Re: [opensuse-buildservice] Re: Repositories: Arch Community is really Arch!
by Adrian Schröter 20 Mar '18

20 Mar '18

On Dienstag, 20. März 2018, 09:39:46 CET wrote Dmitry Ivanov: > > > > Arch Core seems to be really not enough anymore to build anything, > > so I dropped it from our simple repo list. > > > > i586 seems to be dropped as well. > > > > What do you miss when building against Extra? > > One of my packages requires qtkeychain <https://www.archlinux.org/packages/community/x86_64/qtkeychain/> which is a part of Community repo, not Extra. But it’s not really the point of my previous message, the point is that the web interface won’t allow me to enable neither Arch Extra nor Arch Community: there any three checkboxes for Arch in «Add repositories» page and whichever ones I select, I end up with only «Arch:Core» within the list of my project's repositories. It seems to be a bug of the web interface. Is is possible to enable Extra/Community repositories using osc command line tool? It does not make sense to have them in parallel. Just enable the community one, if it is okay for you to go with the lowest trust level. It includes all the packages from Extra and Core as well. -- Adrian Schroeter email: adrian(a)suse.de SUSE Linux GmbH, GF: Felix Imendörffer, Jane Smithard, Graham Norton, HRB 21284 (AG Nürnberg) Maxfeldstraße 5 90409 Nürnberg Germany -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-buildservice+owner(a)opensuse.org

3 2

[opensuse-buildservice] Cannot branch old revision
by Roman Bolshakov 20 Mar '18

20 Mar '18

Hello, I'm trying to branch old revisions of a set of packages and can't figure out how to do that. An attempt to branch a revision fails: osc -d branch -r 131 network openvswitch POST https://api.opensuse.org/source/network/openvswitch?cmd=branch&rev=131 BuildService API error: failed to branch: conflict in file openvswitch.spec Similar issue happens when I try to see files of the revision in Web UI: https://build.opensuse.org/package/show/network/openvswitch?rev=131 The error header on the top is: Files could not be expanded: conflict in file openvswitch.spec However Web UI lets me to see the revision if I click on show unmerged sources (which adds expand=0 parameter). https://build.opensuse.org/package/show/network/openvswitch?expand=0&rev=131 If I then click "Branch package" and tick "Stay on current revision (#131)", it makes a POST request: utf8=%E2%9C%93&authenticity_token=<TOKEN>&linked_project=network&linked_package=openvswitch&target_project=home%3Aroolebo%3Abranches%3Anetwork&target_package=openvswitch&current_revision=false&autocleanup=true&commit=Ok And then proceeds with branch creation but copies the latest revision of the files instead of the one I asked it. I also tried to specify --link=base: osc -d branch --linkrev=base -r 131 network openvswitch POST https://api.opensuse.org/source/network/openvswitch?linkrev=base&cmd=branch… BuildService API error: failed to branch: conflict in file openvswitch.spec What should I do to branch an old revision? Thank you, Roman -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-buildservice+owner(a)opensuse.org

2 2

[opensuse-buildservice] Repositories: Arch Community is really Arch!
by Rick Richardson 20 Mar '18

20 Mar '18

Repositories: Arch Community is really Arch Core! This is a bug, I think. If you check all https://build.opensuse.org/project/add_repository_from_default_list/home:ri… in: Arch distributions check Arch Core check Arch Extra check Arch Community you only get *two* repositories: Arch and Arch_Extra. Arch_Community is not there! Can you fix it??? -- Rick Richardson rickrich(a)gmail.com Linux printer drivers for JBIG (GDI printers): Konica Minolta magicolor, HP LaserJet, Samsung, Xerox, Lexmark, and Oki. http://foo2zjs.rkkda.com/ Linux tools for geocaching http://geo.rkkda.com/ Gnome Manual Duplex http://sourceforge.net/projects/g-manual-duplex/ -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-buildservice+owner(a)opensuse.org

4 8

[opensuse-buildservice] build.opensuse.org: $HOME project suddenly has openSUSE as Vendor?
by Stefan Seyfried 17 Mar '18

17 Mar '18

Hi all, I think build.opensuse.org has a setup problem. Previously, my home:seife:testing repo (where I basically test my factory contributions) had a vendor tag of "obs://build.opensuse.org/home:seife". Today I was trying to zypper dup and noticed many packages only resolvable with vendor changes from obs://...home:seife => openSUSE. Is there a configuration issue? If I do "osc buildconfig home:seife:testing openSUSE_Factory", everything looks as it should. -- Stefan Seyfried "For a successful technology, reality must take precedence over public relations, for nature cannot be fooled." -- Richard Feynman -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-buildservice+owner(a)opensuse.org

1 0

[opensuse-buildservice] How to add reference to Leap 42.3 Ports Update in os-autoinst OBS project
by Normand 14 Mar '18

14 Mar '18

I do not know the relations of repos addresses referenced in an installed machine and the repos referenced in OBS. But in a Leap 42.3 ppc64le guest I have a specific repo for update: http://download.opensuse.org/ports/update/leap/42.3/oss/ that is not same as default of x86_64. I would like to add similar repo in the meta file of devel:openQA:Leap:42.3 project (2) How to address in OBS the equivalent Leap 42.3 Ports Update repo ? I found reference to a potential url https://download.opensuse.org/repositories/openSUSE:/Leap:/42.3:/Update/por… but its almost empty as only contains update-test-trivial rpm === $zypper lr -dE Repository priorities are without effect. All enabled repositories share the same priority. # | Alias | Name | Enabled | GPG Check | Refresh | Priority | Type | URI | Service --+-------------+---------------------------+---------+-----------+- 1 | openQA | openQA | Yes | (r ) Yes | Yes | 99 | rpm-md | http://download.opensuse.org/repositories/devel:/openQA/openSUSE_Leap_42.3 | 6 | repo-oss | openSUSE-Leap-42.3-Oss | Yes | (r ) Yes | Yes | 99 | yast2 | http://download.opensuse.org/ports/ppc/distribution/leap/42.3/repo/oss/ | 8 | repo-update | openSUSE-Leap-42.3-Update | Yes | (r ) Yes | Yes | 99 | rpm-md | http://download.opensuse.org/ports/update/leap/42.3/oss/ | === (1) https://bugzilla.suse.com/show_bug.cgi?id=1065961&GoAheadAndLogIn=1 (2) https://build.opensuse.org/project/meta/devel:openQA:Leap:42.3 === <repository name="openSUSE_Leap_42.3"> <path project="openSUSE:Leap:42.3:Ports" repository="ports"/> <path project="openSUSE:Leap:42.3:Update" repository="standard"/> <arch>x86_64</arch> <arch>ppc64le</arch> </repository> === -- Michel Normand -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-buildservice+owner(a)opensuse.org

4 13

[opensuse-buildservice] RC 2 of Open Build Service 2.9 released
by Bjoern Geuken 12 Mar '18

12 Mar '18

Hi again! We are happy to announce the first beta release of the upcoming Open Build Service (OBS) version 2.9. As a highlight we included the ec2 cloud upload that allows you to upload images to the Amazon Web Services (AWS). More infrmation can be found in our recent blog post: http://openbuildservice.org/2018/03/01/cloud-upload/ Other highlights are the Studio Express features, an improved workflow for producing appliance images in OBS. A message bus, supported by RabbitMQ, to help you connect your own tools to what is happening inside the OBS. And a much improved notifications system to keep you up to date with OBS. More information ---------------- For detailed information of the changes we made please have a look into the 2.9 Release Notes: https://github.com/openSUSE/open-build-service/blob/2.9/ReleaseNotes-2.9 It is also recommended to read these before updating your OBS instance! Setting up the ec2 cloud uploader --------------------------------- You can find information about how to set up the cloud uploader service in our admin guide: http://openbuildservice.org/help/manuals/obs-admin-guide/obs.cha.installati… Try OBS 2.9 RC 2 ---------------- Those of you that don't want to install our release (yet) can have a peek at https://build.opensuse.org, our reference server. Install 2.9 RC 2 ---------------- Please read our setup instructions https://github.com/openSUSE/open-build-service/blob/2.9/README.md#installat… or better yet, use our appliance http://download.opensuse.org/repositories/OBS:/Server:/2.9/images/ Update to 2.9 RC 2 ------------------ We do not recommend this for critical production instances but if you already have a running OBS installation and want to update it to this beta, please read also the README.UPDATERS https://github.com/openSUSE/open-build-service/blob/2.9/dist/README.UPDATERS file about the necessary steps. OBS Appliance users who have setup their LVM http://openbuildservice.org/download/#appliance_config can just replace their appliance image without data loss. The migration will happen automatically. OBS 2.9 Final ------------- We look forward to release the final 2.9 version at the end of this week. We hope you like this RC and look forward to your feedback, here on this list, on IRC or by bug reports in GitHub. Your Open Build Service Team -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-buildservice+owner(a)opensuse.org

1 0

[opensuse-buildservice] OBS 2.8 is unable to resolve buildroot-only packages in dependent projects for Ubuntu 18.04 builds
by Neal Gompa 11 Mar '18

11 Mar '18

Hey, I'm trying to do package builds with my internal OBS 2.8 system against Ubuntu 18.04. We have our setup such that we have an "Internal:BuildRoot" project that provides a few packages that our packages can depend on at build-time. The project doesn't publish, but it is set up to be usable for build roots so that useful sets of macros and such are available. In dependent projects that need packages from here, we do something like this: <repository name="xUbuntu_18.04"> <path project="Internal:BuildRoot" repository="xUbuntu_18.04"/> <path project="openSUSE.org:Ubuntu:debbuild" repository="Ubuntu_18.04"/> <path project="openSUSE.org:Ubuntu:18.04" repository="universe"/> <arch>x86_64</arch> </repository> For every other distribution, this results in when a spec file requires one of the packages in there, it is able to successfully resolve it and start the build. However, when we're targeting Ubuntu 18.04, I get the following from the OBS resolver instead: "nothing provides packager-env". The "packager-env" is a virtual name provided by a package called "packager-env-obs", and in other distribution targets, this works. The failure also affects "osc build", presumably because it relies on the OBS service to define the build root in the buildinfo... Anyone have any ideas what's going on here? -- 真実はいつも一つ！/ Always, there's only one truth! -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-buildservice+owner(a)opensuse.org

1 0

[opensuse-buildservice] No such file or directory
by Bengt Gördén 10 Mar '18

10 Mar '18

Hi, (my second mail. my first mail got caught by the Mlmmj program) I'm new to this so please bear with me. My goal is to build a package that is stable and up to date, and one package that tracks the git-repo and build nightly (or at least weekly) versions. And I also configured the project to build for Ubuntu as it is what I've got in my studio since Jacklab was discontinued. I seem to not be able to build a package (muse). Not even the native rpm for opensuse tumbleweed. I've tried both to branch the package from an earlier version and also create a new one. I also removed two packages (ccaudio2) from the spec file when I created a new package. This is the problem I run into. It can't cd into a the main dir for the package. Funny enough it built right of the bat when I branched the package. I don't understand why it can't cd to the directory. If I run the commands manually it's no problem. [ 90s] + /usr/bin/gzip -dc /home/abuild/rpmbuild/SOURCES/muse-3.0.2.tar.gz [ 90s] + /usr/bin/tar -xof - [ 91s] + STATUS=0 [ 91s] + '[' 0 -ne 0 ']' [ 91s] + cd muse-3.0.2 [ 91s] /var/tmp/rpm-tmp.9tyBTh: line 34: cd: muse-3.0.2: No such file or directory [ 91s] error: Bad exit status from /var/tmp/rpm-tmp.9tyBTh (%prep) https://build.opensuse.org/package/show/home:aggplanta/muse3_deb. https://build.opensuse.org/package/live_build_log/home:aggplanta/muse3_deb/… Cheers, -- /bengan -- /bengan -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-buildservice+owner(a)opensuse.org

2 2

[opensuse-buildservice] Per-project repositories on OBS?
by Roger Oberholtzer 09 Mar '18

09 Mar '18

I have a project that inherits the target repositories. Is it possible to add an additional repository to a specific project? Ideally it will still build for the repositories it inherited. But it will also build for the additional target repositories. I usually work in the web GUI. But any command that could accomplish this is interesting. -- Roger Oberholtzer -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-buildservice+owner(a)opensuse.org

3 4

[opensuse-buildservice] How to make use or get rid of https://<local-obs-instance>/search ?
by Carsten Hoeger 01 Mar '18

01 Mar '18

Hi, the builtin search function doesn't seem to work in our internal obs 2.8 instance. It fails with 500: Internal Server Error It also allows to search within various external systems. Can search into external systems be disabled? How to make internal search work? In the logs I see: I, [2018-03-01T08:07:30.069322 #1051] INFO -- : [3c5c7815-d750-4e5c-9324-672c2d9df041] [1051:29239.76] Started GET "/search?utf8=%E2%9C%93&search_text=test&commit=Submit+Query&issue_tracker=bnc&issue=&project=0&project=1&package=0&package=1&name=0&name=1&title=0&description=0&attrib_type_id=" for 10.10.10.249 at 2018-03-01 08:07:30 +0100 I, [2018-03-01T08:07:30.080704 #1051] INFO -- : [3c5c7815-d750-4e5c-9324-672c2d9df041] [1051:29239.77] Processing by Webui::SearchController#index as HTML I, [2018-03-01T08:07:30.080953 #1051] INFO -- : [3c5c7815-d750-4e5c-9324-672c2d9df041] [1051:29239.77] Parameters: {"utf8"=>"✓", "search_text"=>"test", "commit"=>"Submit Query", "issue_tracker"=>"bnc", "issue"=>"", "project"=>"1", "package"=>"1", "name"=>"1", "title"=>"0", "description"=>"0", "attrib_type_id"=>""} I, [2018-03-01T08:07:30.132015 #1051] INFO -- : [3c5c7815-d750-4e5c-9324-672c2d9df041] [1051:29239.83] Completed 500 Internal Server Error in 51ms (ActiveRecord: 0.0ms | Backend: 0.0ms | XML: 0.0ms) F, [2018-03-01T08:07:30.147233 #1051] FATAL -- : [3c5c7815-d750-4e5c-9324-672c2d9df041] [1051:29239.84] F, [2018-03-01T08:07:30.147515 #1051] FATAL -- : [3c5c7815-d750-4e5c-9324-672c2d9df041] [1051:29239.84] ThinkingSphinx::ConnectionError (Error connecting to Sphinx via the MySQL protocol. Error connecting to Sphinx via the MySQL protocol. Can't connect to MySQL server on '127.0.0.1' (111 "Connection refused") - SELECT *, (weight() + 100 * linked_count + -1000 * links_to_other + 1000 * is_devel + 500 * (activity_index * POW( 2.3276, (updated_at - 1519888050) / 10000000))) as adjusted_weight FROM `package_core`, `project_core` WHERE MATCH('@(name) test') AND `sphinx_deleted` = 0 AND `project_id` NOT IN (0) ORDER BY `adjusted_weight` DESC LIMIT 0, 20 OPTION field_weights=(name=10, title=2, description=1), max_matches=15000, ranker=sph04; SHOW META): F, [2018-03-01T08:07:30.147640 #1051] FATAL -- : [3c5c7815-d750-4e5c-9324-672c2d9df041] [1051:29239.84] F, [2018-03-01T08:07:30.147747 #1051] FATAL -- : [3c5c7815-d750-4e5c-9324-672c2d9df041] [1051:29239.84] app/controllers/webui/search_controller.rb:82:in `search' [3c5c7815-d750-4e5c-9324-672c2d9df041] app/controllers/webui/search_controller.rb:7:in `index' [3c5c7815-d750-4e5c-9324-672c2d9df041] config/initializers/wrap_parameters.rb:38:in `call' ==> /srv/www/obs/api/log/apache_access.log <== 10.10.10.249 - - [01/Mar/2018:08:07:30 +0100] "GET /search?utf8=%E2%9C%93&search_text=test&commit=Submit+Query&issue_tracker=bnc&issue=&project=0&project=1&package=0&package=1&name=0&name=1&title=0&description=0&attrib_type_id= HTTP/1.1" 500 4322 ==> /srv/www/obs/api/log/production.log <== I, [2018-03-01T08:07:30.268687 #1051] INFO -- : [1c81b044-0d0d-4966-b10d-43169b6b070d] [1051:29239.96] Started GET "/favicon.ico" for 10.10.10.249 at 2018-03-01 08:07:30 +0100 F, [2018-03-01T08:07:30.272464 #1051] FATAL -- : [1c81b044-0d0d-4966-b10d-43169b6b070d] [1051:29239.97] F, [2018-03-01T08:07:30.272791 #1051] FATAL -- : [1c81b044-0d0d-4966-b10d-43169b6b070d] [1051:29239.97] ActionController::RoutingError (No route matches [GET] "/favicon.ico"): F, [2018-03-01T08:07:30.272886 #1051] FATAL -- : [1c81b044-0d0d-4966-b10d-43169b6b070d] [1051:29239.97] F, [2018-03-01T08:07:30.273059 #1051] FATAL -- : [1c81b044-0d0d-4966-b10d-43169b6b070d] [1051:29239.97] actionpack (5.0.1) lib/action_dispatch/middleware/debug_exceptions.rb:53:in `call' [1c81b044-0d0d-4966-b10d-43169b6b070d] actionpack (5.0.1) lib/action_dispatch/middleware/show_exceptions.rb:31:in `call' [1c81b044-0d0d-4966-b10d-43169b6b070d] railties (5.0.1) lib/rails/rack/logger.rb:36:in `call_app' [1c81b044-0d0d-4966-b10d-43169b6b070d] railties (5.0.1) lib/rails/rack/logger.rb:24:in `block in call' [1c81b044-0d0d-4966-b10d-43169b6b070d] activesupport (5.0.1) lib/active_support/tagged_logging.rb:69:in `block in tagged' [1c81b044-0d0d-4966-b10d-43169b6b070d] activesupport (5.0.1) lib/active_support/tagged_logging.rb:26:in `tagged' [1c81b044-0d0d-4966-b10d-43169b6b070d] activesupport (5.0.1) lib/active_support/tagged_logging.rb:69:in `tagged' [1c81b044-0d0d-4966-b10d-43169b6b070d] railties (5.0.1) lib/rails/rack/logger.rb:24:in `call' [1c81b044-0d0d-4966-b10d-43169b6b070d] actionpack (5.0.1) lib/action_dispatch/middleware/request_id.rb:24:in `call' [1c81b044-0d0d-4966-b10d-43169b6b070d] rack (2.0.1) lib/rack/method_override.rb:22:in `call' [1c81b044-0d0d-4966-b10d-43169b6b070d] rack (2.0.1) lib/rack/runtime.rb:22:in `call' [1c81b044-0d0d-4966-b10d-43169b6b070d] activesupport (5.0.1) lib/active_support/cache/strategy/local_cache_middleware.rb:28:in `call' [1c81b044-0d0d-4966-b10d-43169b6b070d] actionpack (5.0.1) lib/action_dispatch/middleware/executor.rb:12:in `call' [1c81b044-0d0d-4966-b10d-43169b6b070d] rack (2.0.1) lib/rack/lock.rb:15:in `call' [1c81b044-0d0d-4966-b10d-43169b6b070d] rack (2.0.1) lib/rack/sendfile.rb:111:in `call' [1c81b044-0d0d-4966-b10d-43169b6b070d] hoptoad_notifier (2.4.11) lib/hoptoad_notifier/user_informer.rb:12:in `call' [1c81b044-0d0d-4966-b10d-43169b6b070d] railties (5.0.1) lib/rails/engine.rb:522:in `call' [1c81b044-0d0d-4966-b10d-43169b6b070d] railties (5.0.1) lib/rails/railtie.rb:193:in `public_send' [1c81b044-0d0d-4966-b10d-43169b6b070d] railties (5.0.1) lib/rails/railtie.rb:193:in `method_missing' [1c81b044-0d0d-4966-b10d-43169b6b070d] passenger (5.0.30) src/ruby_supportlib/phusion_passenger/rack/thread_handler_extension.rb:97:in `process_request' [1c81b044-0d0d-4966-b10d-43169b6b070d] passenger (5.0.30) src/ruby_supportlib/phusion_passenger/request_handler/thread_handler.rb:152:in `accept_and_process_next_request' [1c81b044-0d0d-4966-b10d-43169b6b070d] passenger (5.0.30) src/ruby_supportlib/phusion_passenger/request_handler/thread_handler.rb:113:in `main_loop' [1c81b044-0d0d-4966-b10d-43169b6b070d] passenger (5.0.30) src/ruby_supportlib/phusion_passenger/request_handler.rb:416:in `block (3 levels) in start_threads' [1c81b044-0d0d-4966-b10d-43169b6b070d] passenger (5.0.30) src/ruby_supportlib/phusion_passenger/utils.rb:113:in `block in create_thread_and_abort_on_exception' So I searched for "sphinx" and only found this: http://openbuildservice.org/help/manuals/obs-reference-guide/cha.obs.admin.… When I try to start the searchd.service, it fails: ● searchd.service - Sphinx - SQL Full Text Search Engine Loaded: loaded (/usr/lib/systemd/system/searchd.service; disabled; vendor preset: disabled) Active: failed (Result: exit-code) since Thu 2018-03-01 08:19:24 CET; 4min 44s ago Process: 13214 ExecStart=/usr/bin/searchd --nodetach --config /etc/sphinx/sphinx.conf (code=exited, status=1/FAILURE) Main PID: 13214 (code=exited, status=1/FAILURE) Mar 01 08:19:24 buildservice searchd[13214]: Copyright (c) 2001-2016, Andrew Aksyonoff Mar 01 08:19:24 buildservice searchd[13214]: Copyright (c) 2008-2016, Sphinx Technologies Inc (http://sphinxsearch.com) Mar 01 08:19:24 buildservice searchd[13214]: precaching index 'test1' Mar 01 08:19:24 buildservice searchd[13214]: WARNING: index 'test1': preload: failed to open /var/lib/sphinx/data/test1.sph: No such file or directory; NOT SERVING Mar 01 08:19:24 buildservice searchd[13214]: precaching index 'test1stemmed' Mar 01 08:19:24 buildservice searchd[13214]: WARNING: index 'test1stemmed': preload: failed to open /var/lib/sphinx/data/test1stemmed.sph: No such file or directory; NOT SERVING Mar 01 08:19:24 buildservice searchd[13214]: precaching index 'rt' Mar 01 08:19:24 buildservice systemd[1]: searchd.service: Main process exited, code=exited, status=1/FAILURE Mar 01 08:19:24 buildservice systemd[1]: searchd.service: Unit entered failed state. Mar 01 08:19:24 buildservice systemd[1]: searchd.service: Failed with result 'exit-code'. Is there some documentation about this integration? Or can I at least disable that in the ui? -- kind regards, Carsten Hoeger Professional Services Phone: +49 2761 75252 00 Fax: +49 2761 75252 30 Email: carsten.hoeger(a)open-xchange.com ------------------------------------------------------------------------------------- Open-Xchange AG, Rollnerstr. 14, 90408 Nuremberg, District Court Nuremberg HRB 24738 Managing Board: Rafael Laguna de la Vera, Carsten Dirks, Michael Knapstein, Stephan Martin Chairman of the Board: Richard Seibt European Office: Open-Xchange GmbH, Olper Huette 5f, D-57462 Olpe, Germany, District Court Siegen, HRB 8718 Managing Director: Frank Hoberg US Office: Open-Xchange. Inc., 530 Lytton Avenue, Palo Alto, CA 94301, USA -------------------------------------------------------------------------------------

4 4