openSUSE Build Service December 2014

buildservice@lists.opensuse.org

39 participants
27 discussions

[opensuse-buildservice] Build : Kiwi + obs -> vagrant box
by Florian Leparoux 31 Dec '14

31 Dec '14

Hi, Is there a method to generate vagrant box (Especially for centos) with obs ? I tried several things without success in my home (https://build.opensuse.org/package/show/home:T1loc:Images/vagrant-box-cento…) I missing dependencies for centos ... : zypper, btrfsprogs. Thank you for your help -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-buildservice+owner(a)opensuse.org

4 9

[opensuse-buildservice] How publish a package
by Eric Schirra 31 Dec '14

31 Dec '14

Hello, i search, but i not found any howto that describe how i can publish a package from my home to an 'official' place. Or what i must do that the package i showing under /repositories other than my home-repo. Can someone tell me where i can found a tutorial for that? Thank you. regards Eric -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-buildservice+owner(a)opensuse.org

4 4

[opensuse-buildservice] build service stuck?
by Mathias Homann 25 Dec '14

25 Dec '14

Hi guys, I have a couple of scheduled builds that are sitting there waiting for something since one day ago... and I see a few builds in the status page that have been building (?) for ten days by now, something doesn't look right there. Still, merry christmas! MH -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-buildservice+owner(a)opensuse.org

1 0

[opensuse-buildservice] How to bootstrap OBS for a complete new architecture?
by Dennis Olsson 22 Dec '14

22 Dec '14

Hi, I want to run a local OBS for a complete new architecture, but cannot figure out how to bootstrap the OBS for this. The only hints I have found on the net either talks about bootstrapping a local OBS for the Intel/AMD architectures or refer to the no longer existing Meego pages/repositories. Any help in form of references to HowTo's or simply "cookbooks" is much appreciated. Mit freundlichen Grüßen, | Med venlig hilsen | Best regards, Dennis N��r��y隊Z)z{.��Wlz��qﮞ˛��m�)z{.��+�:�{Zr�az�'z��j)h��Ǜ�)]��Ǿ� ޮ�^�ˬz��

2 2

[opensuse-buildservice] Binary packages not being published?
by Erico Mendonca 19 Dec '14

19 Dec '14

Hello all, I have (one of many) weird problems with Build Service. Here's the first one. :-) I built this package: https://build.opensuse.org/package/show/home:emendonca:branches:devel:langu… Which has an _aggregate on another branched project and two packages: <aggregatelist> <aggregate project="home:emendonca:branches:devel:languages:perl"> <package>perl-Gnome2-Vte</package> <package>perl-macros</package> <repository target="SLE_11" source="SLE_11_SP3" /> </aggregate> </aggregatelist> The package perl-Gnome2-Vte has an aggregate on perl-macros: <aggregatelist> <aggregate project="home:emendonca:branches:devel:languages:perl"> <package>perl-macros</package> <repository target="SLE_11" source="SLE_11_SP3" /> </aggregate> </aggregatelist> So the whole build dependency chain is: perl-macros -> perl-Gnome2-Vte -> pac-manager. The whole thing works, and all the packages get built successfully. The webui indicates that the resulting packages were published... but they are nowhere to be found. I already tried deleting built binaries and triggering new rebuilds, but the result is always the same. Only the first package binary (perl-macros) gets published. What am I doing wrong here? Erico Mendonça Dedicated Support Engineer (Work)+55 (61) 8594-9557 (Main) +55 (11) 3345-3900 (Personal) +55 (61) 9115-3256 emendonca(a)suse.com -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-buildservice+owner(a)opensuse.org

4 4

[opensuse-buildservice] How to use (clang+)gcc49 at OBS <-> libgcc_s1 issue?
by Dmitriy Perlow 15 Dec '14

15 Dec '14

Hi to all! How gcc49 can be used for oS 13.2? If it is required to build unresolvable state will appear with message "conflict for provider of libgcc_s1 >= 4.9.0+r211729-2.1.7 needed by gcc49, (provider libgcc_s1-gcc49 is conflicted by installed libgcc_s1)". "BuildConflicts: libgcc_s1" causes failed state with "libgcc_s1 isn't installed" message. By the way gcc49 isn't my goal, I would like to make a clang build with gcc 4.9' environment so any tips are welcomed. Asked by me here too: http://lists.opensuse.org/opensuse-packaging/2014-12/msg00047.html -- Best regards, Dmitriy DA(P).DarkneSS Perlow @ Linux x64 -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-buildservice+owner(a)opensuse.org

1 0

[opensuse-buildservice] name of the tar ball generated from git
by Amir Hassan 15 Dec '14

15 Dec '14

Hi, I just realized i can add a git download service via the web interface to https://build.opensuse.org/package/show/home:elchaschab/Neurocid. But i can't figure out how the resulting tar ball is named (and therefor i'm not able to succesfully update the spec). How can i find out the file name? thx, amir -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-buildservice+owner(a)opensuse.org

2 1

[opensuse-buildservice] Does OBS have troubles?
by Johannes Weberhofer 12 Dec '14

12 Dec '14

Currently only PPC and ARM packages seem to build. Are there any problems? -- Johannes Weberhofer Weberhofer GmbH, Austria, Vienna -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-buildservice+owner(a)opensuse.org

4 4

[opensuse-buildservice] OBS 2.6 RC 1
by Adrian Schröter 12 Dec '14

12 Dec '14

OBS 2.6 RC 1 is out there. OBS 2.6 RC 1 is available as version 2.5.95 inside of OBS:Server:2.6 project. Only bugfixes, esp. for migration issues has went in since Beta 1. So it should be even more save to update now. It is intended to release this version just with the final version number early in january. You can find appliances and package repositories here: http://download.opensuse.org/repositories/OBS:/Server:/2.6/ SLE_12 needs one more fix to be available. You can find the temporary release and update notes here: https://github.com/openSUSE/open-build-service/blob/2.6/ReleaseNotes-2.6 I wish you a happy new year already ... and have fun! :) adrian -- Adrian Schroeter email: adrian(a)suse.de SUSE LINUX GmbH, GF: Jeff Hawn, Jennifer Guild, Felix Imendörffer, HRB 21284 (AG Nürnberg) Maxfeldstraße 5 90409 Nürnberg Germany -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-buildservice+owner(a)opensuse.org

1 0

[opensuse-buildservice] new package based on the existing one
by Gour 10 Dec '14

10 Dec '14

Hello, after many years I'm back to Suse and would like to create new package which is based on some existing one, iow. take existing one, rename it and modify. What is the best way to accomplish it? I was reading 'tutorial' but not sure whether 'branch' command is the way to go? Sincerely, Gour -- From wherever the mind wanders due to its flickering and unsteady nature, one must certainly withdraw it and bring it back under the control of the self. -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-buildservice+owner(a)opensuse.org

8 21

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

openSUSE Build Service December 2014