November 2012 - openSUSE Build Service

[opensuse-buildservice] _link, _aggregate and getting rid of them
by Werner Flamme 17 Nov '12

17 Nov '12

Currently, I'm fighting with _link and _aggregate. I'm trying to build open-vm-tools for SLES 11 SP2 in my home:werfl project. This won't build because of the missing liburiparser libs. In my open-vm-tools package, I set a _link to Virtualization:VMware, but the binaries were not found. Then I set an _aggregate, and they were found. Nice. The open-vm-tools package builds fine locally. But the open-vm-tools package does not build inside obs, though it shows "succeeded" for hours now. I think the obs is confused by the aggregated binaries. I managed to get rid of the _link by "osc detachbranch", now I try to get rid of the _aggregate... How may I achieve this? Delete the _aggregate file in the sources? Or in the .osc subdirectory? Next question: on <http://en.opensuse.org/openSUSE:Build_Service_Tips_and_Tricks#link_and_aggr…> I read "Aggregate is possible, but slows down your build and requires double space. Better build directly against the other repository.". I'd love to do so, but where and how do I tell obs about this "other repository"? The output of "osc buildinfo" shows <path project="home:werfl" repository="SLE_11_SP2" /> <path project="SUSE:SLE-11:SP2" repository="standard" /> so I think it might be added here, but osc does not support editing the buildinfo. From the man page of obs, I see no other way to do so. Can someone point me to the right direction, please? Best regards, Werner -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-buildservice+owner(a)opensuse.org

2 3

[opensuse-buildservice] Cannot build against openSUSE.org:Debian:6.0/standard ARM target
by Benjamin Federau 17 Nov '12

17 Nov '12

Hey, I'm using the obs-server.i686-2.3.6-Build2.14-vmx appliance and I want to build packages against Debian 6.0 i586 and armel architectures. This works for i586, but when I select the armv7l architecture it does not appear on the overview page. I had a look into the scheduler_armv7l.log and I found this message: ----- fetching remote project config for openSUSE.org:Debian:6.0 - home:bfederau/Debian_6.0 scanning repo home:bfederau/Debian_6.0... fetching remote repository state for openSUSE.org:Debian:6.0/standard 404 remote error: project has no architecture 'armv7l' repository 'openSUSE.org:Debian:6.0/standard' is unavailable ---- Is there no support for Debian 6.0 ARM at the openSUSE.org:Debian:6.0 project in general or do I need an addtional setup on my local OBS for this architecture? Related to this I also want to ask if it is possible to create a Debian fakeobs archive out of an official Debian repository (http://ftp.de.debian.org/debian/)? I mean can I create my own build targets for my local obs which are not from build.openSUSE.org or build.meego.com? Cheers - Benjamin Federau -- M.Sc. Benjamin Federau Integration Engineer basysKom GmbH Robert-Bosch-Str. 7 | 64293 Darmstadt | Germany benjamin.federau(a)basyskom.com | www.basyskom.com Handelsregister: Darmstadt HRB 9352 Geschaeftsfuehrung: Dr.-Ing. Eva Brucherseifer, Heike Ziegler -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-buildservice+owner(a)opensuse.org

2 1

[opensuse-buildservice] Open Build Service 2.3.7 released
by Adrian Schröter 16 Nov '12

16 Nov '12

Open Build Service(OBS) 2.3.7 just got released =============================================== This release brings some bugfixes and compatibility fixes with remote OBS 2.4 instances. OBS 2.3.7 is published in "openSUSE:Tools" project: http://download.opensuse.org/repositories/openSUSE:Tools/ Appliances can be used as usual: http://en.opensuse.org/openSUSE:Build_Service_Appliance Feature backports: ================== * none Changes: ======== * backend: compability with perl-BSSolv 0.18 and later. * webui: Added Ubuntu 12.10 and removed 11.04 from default list. Bugfixes: ========= * webui: fixed source file download link, when anonymous mode got disabled. * backend: fixed hostarch cross build support for kiwi and delta jobs * backend: fixed scanning of package sources after project copy -- Adrian Schroeter SUSE Linux Products GmbH email: adrian(a)suse.de -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-buildservice+owner(a)opensuse.org

1 0

[opensuse-buildservice] OBS Web Interface Error: Error Details: Errorcode: 400 Message: excess hash entries: obsoletes
by Rob Zebedee 16 Nov '12

16 Nov '12

I am having trouble with a local OBS server when going to this page for the package binaries?package=system-startup&project=home%3Adeploysystem&repository=SLE_11 I get the error OBS Web Interface Error: Error Details: Errorcode: 400 Message: excess hash entries: obsoletes the rep_server.log show this 2012-11-15 14:24:08 [15817]: GET /build/home:deploysystem/SLE_11/x86_64/system-startup/system-startup-2.0.9-26.1.src.rpm?view=fileinfo_ext fetching remote repository state for openSUSE.org:SUSE:SLE-11/standard 10.97.154.32: excess hash entries: obsoletes I am at a loss as to how to fix this issue I am seeing, the same package built on the web OBS works fine. Detailed Information About system-startup-2.0.9-5.1.x86_64.rpm Title: This package provides the Pharos system configuration tool Description: This package contains a series of scripts which are initially used to install required packages on this blade and subsequently to download configuration to this blade from the x-core or y-core blades. It is intended that each blade should be identical - any additional scripts or configuration required will be downloaded by this script. Version: 2.0.9 Release: 5.1 Architecture: x86_64 Size: 58.8 KB Build Time: 2012-11-15 13:41:41 +0100 (now) Provides Symbol Required by system-startup = 2.0.9-5.1 Requires Symbol Provided by enable-sudo-commands enable-pharos-service licence-eval python python Rob Zebedee Senior Integration Engineer Evertz Europe t: +44 (0)118 9216800 rob.zebedee(a)pharos.tv Mediator - Driving productivity for broadcast and new media -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-buildservice+owner(a)opensuse.org

3 5

[opensuse-buildservice] Hermes
by Andreas Schwab 15 Nov '12

15 Nov '12

How can I add/change hermes notifications while hermes.o.o is down? Andreas. -- Andreas Schwab, SUSE Labs, schwab(a)suse.de GPG Key fingerprint = 0196 BAD8 1CE9 1970 F4BE 1748 E4D4 88E3 0EEA B9D7 "And now for something completely different." -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-buildservice+owner(a)opensuse.org

3 3

[opensuse-buildservice] further dependency problems since the last update
by Nico Kruber 14 Nov '12

14 Nov '12

from https://build.opensuse.org/project/monitor?project=home%3Ascalaris:svn ArchLinux: nothing provides screen, nothing provides openssl, nothing provides erlang >= R13B01, nothing provides binutils, nothing provides gcc, nothing provides glibc, nothing provides libtool nothing provides apache-ant, nothing provides glib2, nothing provides erlang >= R13B01, nothing provides java-environment >= 1.6.0, nothing provides python2 >= 2.6, nothing provides python >= 3.0, nothing provides binutils, nothing provides gcc, nothing provides glibc, nothing provides libtool Mandriva 2011: nothing provides erlang-base = R14B-2.1 needed by erlang-compiler, nothing provides erlang-base = R14B-2.1 needed by erlang-crypto, nothing provides erlang-base = R14B-2.1 needed by erlang-edoc, nothing provides erlang-base = R14B-2.1 needed by erlang-inets, nothing provides erlang-base = R14B-2.1 needed by erlang-ssl, nothing provides erlang-base = R14B-2.1 needed by erlang-tools, nothing provides erlang-base = R14B-2.1 needed by erlang-xmerl, nothing provides erlang-base = R14B-2.1 needed by erlang-test_server, nothing provides lib64bzip2_1 = 1.0.6-3 needed by bzip2, nothing provides libtool-base = 2.4-3 needed by libtool, nothing provides perl-base = 2:5.12.3-8 needed by perl, nothing provides ncurses = 5.9-2 needed by lib64ncurses5, nothing provides erlang-base = R14B-2.1 needed by erlang-syntax_tools, nothing provides lib64gmp10 = 5.0.2-1 needed by lib64gmpxx4, nothing provides gcc = 4.6.1-2 needed by gcc-cpp, nothing provides glibc = 6:2.13-6 needed by glibc- devel, nothing provides gcc = 4.6.1-2 needed by gcc-c++, nothing provides lib64elfutils1 = 0.152-3 needed by elfutils, nothing provides rpm-mandriva- setup = 1.130-1 needed by rpm-mandriva-setup-build, nothing provides augeas- lenses = 0.8.0-2 needed by lib64augeas0, nothing provides lib64stdc++6 = 4.6.1-2 needed by lib64stdc++-devel, nothing provides rpm-manbo-setup = 2-26 needed by rpm-manbo-setup-build, have choice for libstdc++.so.6()(64bit) needed by binutils: lib64stdc++6 libreoffice-common, have choice for libstdc++.so.6(GLIBCXX_3.4)(64bit) needed by binutils: lib64stdc++6 libreoffice-common, have choice for libstdc++.so.6(GLIBCXX_3.4.11)(64bit) needed by binutils: lib64stdc++6 libreoffice-common, have choice for libstdc++.so.6(GLIBCXX_3.4.15)(64bit) needed by binutils: lib64stdc++6 libreoffice-common, have choice for libstdc++.so.6(GLIBCXX_3.4.10)(64bit) needed by binutils: lib64stdc++6 libreoffice-common, have choice for libstdc++.so.6()(64bit) needed by lib64gmpxx4: lib64stdc++6 libreoffice- common, have choice for libstdc++.so.6(GLIBCXX_3.4)(64bit) needed by lib64gmpxx4: lib64stdc++6 libreoffice-common, have choice for libstdc++.so.6(GLIBCXX_3.4.11)(64bit) needed by lib64gmpxx4: lib64stdc++6 libreoffice-common, have choice for libstdc++.so.6()(64bit) needed by lib64ppl9: lib64stdc++6 libreoffice-common, have choice for libstdc++.so.6(GLIBCXX_3.4)(64bit) needed by lib64ppl9: lib64stdc++6 libreoffice-common, have choice for libstdc++.so.6(GLIBCXX_3.4.9)(64bit) needed by lib64ppl9: lib64stdc++6 libreoffice-common, have choice for libstdc++.so.6(GLIBCXX_3.4.11)(64bit) needed by lib64ppl9: lib64stdc++6 libreoffice-common, have choice for libstdc++.so.6(GLIBCXX_3.4.15)(64bit) needed by lib64ppl9: lib64stdc++6 libreoffice-common, have choice for libstdc++.so.6()(64bit) needed by lib64pwl5: lib64stdc++6 libreoffice-common, have choice for libstdc++.so.6(GLIBCXX_3.4)(64bit) needed by lib64pwl5: lib64stdc++6 libreoffice-common, have choice for libstdc++.so.6()(64bit) needed by lib64ppl_c4: lib64stdc++6 libreoffice-common, have choice for libstdc++.so.6(GLIBCXX_3.4)(64bit) needed by lib64ppl_c4: lib64stdc++6 libreoffice-common, have choice for libstdc++.so.6(GLIBCXX_3.4.9)(64bit) needed by lib64ppl_c4: lib64stdc++6 libreoffice-common, have choice for libstdc++.so.6(GLIBCXX_3.4.11)(64bit) needed by lib64ppl_c4: lib64stdc++6 libreoffice-common, have choice for libstdc++.so.6(GLIBCXX_3.4.15)(64bit) needed by lib64ppl_c4: lib64stdc++6 libreoffice-common, have choice for libstdc++.so.6()(64bit) needed by lib64gettextmisc: lib64stdc++6 libreoffice- common, have choice for libstdc++.so.6(GLIBCXX_3.4)(64bit) needed by lib64gettextmisc: lib64stdc++6 libreoffice-common, have choice for libstdc++.so.6()(64bit) needed by lib64beecrypt7: lib64stdc++6 libreoffice- common, have choice for libstdc++.so.6(GLIBCXX_3.4)(64bit) needed by lib64beecrypt7: lib64stdc++6 libreoffice-common, have choice for libstdc++.so.6(GLIBCXX_3.4.9)(64bit) needed by lib64beecrypt7: lib64stdc++6 libreoffice-common, have choice for libstdc++.so.6(GLIBCXX_3.4.11)(64bit) needed by lib64beecrypt7: lib64stdc++6 libreoffice-common, have choice for libstdc++.so.6()(64bit) needed by lib64pcre0: lib64stdc++6 libreoffice-common, have choice for libstdc++.so.6(GLIBCXX_3.4)(64bit) needed by lib64pcre0: lib64stdc++6 libreoffice-common, have choice for libstdc++.so.6(GLIBCXX_3.4.9) (64bit) needed by lib64pcre0: lib64stdc++6 libreoffice-common Nico -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-buildservice+owner(a)opensuse.org

2 3

[opensuse-buildservice] Two times the same repo in a project
by Hans-Peter Jansen 14 Nov '12

14 Nov '12

Hi, I managed to add the same repository to a project: <project name="home:frispete:database"> <title>frispete's database builds</title> <description></description> <person userid="frispete" role="maintainer"/> <person userid="frispete" role="bugowner"/> <debuginfo> <enable/> </debuginfo> <repository name="openSUSE_11.1"> <path project="DISCONTINUED:openSUSE:11.1:Update" repository="standard"/> <arch>x86_64</arch> <arch>i586</arch> </repository> <repository name="openSUSE_12.1"> <path project="openSUSE:12.1:Update" repository="standard"/> <arch>i586</arch> <arch>x86_64</arch> </repository> <repository name="openSUSE_12.1"> <path project="openSUSE:12.1" repository="standard"/> <arch>i586</arch> <arch>x86_64</arch> </repository> <repository name="openSUSE_12.2"> <path project="openSUSE:12.2" repository="standard"/> <arch>i586</arch> <arch>x86_64</arch> </repository> </project> resulting in funny failures: Web-UI: Failed to remove target 'openSUSE_12.1' repository openSUSE_12.1 listed more than once Hehe. osc: Sending meta data... BuildService API error: 400 repository openSUSE_12.1 listed more than once Try again? ([y/N]): Any idea how to get rid of this? Puzzled, Pete -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-buildservice+owner(a)opensuse.org

3 3

[opensuse-buildservice] Slow OBS for the next hour
by Michael Schroeder 13 Nov '12

13 Nov '12

Hi guys/gals, just to let you know what's going on: the 2.4 release will also consider conflicts/obsoletes when doing the internal dependency expansion. When we enabled the code, we found that all of the Debian/Ubuntu builds were broken. It turned out that the .deb file parser contained a bug that made it parse the "Replaces" element in a wrong way. We fixed this bug, but that also means that we have to regenerate all the internal solv files for each repository. The build service code does this automatically, but the rebuilding slows down the scheduler quite a bit. So for the next hour or so the scheduler will appear to be very sluggish, please be patient. Thanks, Michael. -- Michael Schroeder mls(a)suse.de SUSE LINUX Products GmbH, GF Jeff Hawn, HRB 16746 AG Nuernberg main(_){while(_=~getchar())putchar(~_-1/(~(_|32)/13*2-11)*13);} -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-buildservice+owner(a)opensuse.org

2 3

[opensuse-buildservice] opensuse evergreen 11.1 would be a nice build service target
by Johannes Poehlmann 13 Nov '12

13 Nov '12

I would advocate for opensuse evergreen 11.1 as a new build service target. I failed in building some of my packages on SLED 11 because of failed dependencies, but was succesful on the eldest availible opensuse target. Maybe I did not get how to also use packages from the SLE SDK. But - as SLED 11 seems to be similar to openSUSE 11.1 versionwise - it would be a good starting point to use those packages as replacement for the missing ones in SLED. Also there ARE people outside that do not upgrade openSUSE (because of old Hardware e.g.) and are now very happy with openSUSE 11.1 evergreen. In my eyes these are 2 good reasons to wish a openSUSE 11.1 evergreen target in the Open Build Service. Johannes -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-buildservice+owner(a)opensuse.org

4 9

[opensuse-buildservice] [OBS Bug?]4 new "pseudo" requests, and encoding got changed?
by Marguerite Su 12 Nov '12

12 Nov '12

Hi, 1. I checked my home (home:MargueriteSu) and devel:languages:python they all claim that they have 4 new requests. but clicking into it, you'll got none (for my home) and 2 requests (for d:l:p) 2. Before this update, I have some Chinese in my home description. but now seems they're encoded as UTF-8 random characters. Marguerite -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-buildservice+owner(a)opensuse.org

3 8