November 2010 - openSUSE Build Service

[opensuse-buildservice] will ext4 be enabled in build service ?
by doiggl＠velocitynet.com.au 16 Nov '10

16 Nov '10

Hello. Will ext4 be enabled in build service ? as I saw this in one of the logs Thanks Glenn. reordering...cycle: libcrack2 -> cracklib breaking dependency libcrack2 -> cracklib done booting XEN kernel ... xm create -c /var/run/bsworker_2/build/xen.conf name=build:2_root memory=1500 disk=phy:/dev/mapper/abuild-2_root,hda1,w disk=phy:/dev/mapper/abuild-2_swap,hda2,w extra=quiet init=/.build/build elevator=noop panic=1 console=ttyS0 Using config file "/var/run/bsworker_2/build/xen.conf". Started domain build:2_root PCI: Fatal: No config space access function found i8042.c: No controller found. doing fast boot FATAL: Module ext4 not found. Creating device nodes with udev Boot logging started on /dev/xvc0(/dev/console) at Fri Nov 12 06:04:26 2010 Waiting for device /dev/hda1 to appear: ok fsck 1.41.1 (01-Sep-2008) [/sbin/fsck.ext3 (1) -- /] fsck.ext3 -a /dev/hda1 /dev/hda1: clean, 2658/1024000 files, 167781/4096000 blocks fsck succeeded. Mounting root device read-only. Mounting root /dev/hda1 mount -o ro,defaults -t ext3 /dev/hda1 /root mount: can't find /root/proc in /etc/fstab or /etc/mtab Warning: failed to load Config_git.pl, something strange about this perl... Warning: failed to load Config_git.pl, something strange about this perl... -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-buildservice+help(a)opensuse.org

3 3

[opensuse-buildservice] How to revert to a previous revision?
by Paul Elliott 16 Nov '10

16 Nov '10

Is there any way to revert to a previous revision, other than pipe the output of the osc diff command into patch? What is the proper command to go back one version? Thank You. -- Paul Elliott 1(512)837-1096 pelliott(a)BlackPatchPanel.com PMB 181, 11900 Metric Blvd Suite J http://www.free.blackpatchpanel.com/pme/ Austin TX 78758-3117

6 6

Re: [opensuse-buildservice] OpenJDK crash only on CentOS 5 / 64bit
by Douglas Hubler 15 Nov '10

15 Nov '10

FYI: I was never able to find out why openjdk was crashing during compile on 64bit centors, so i switched back to sun (err...oracle) jdk. And Adrian, Thanks for your response, I'm not sure how I would find out what modules GWT compiler uses. On Sat, Nov 13, 2010 at 8:54 AM, Douglas Hubler <douglas(a)hubler.us> wrote: > Im usings google's get compiler. I strongly doubt it's loading shared > libraries. Would 32 and 64 bit machines be setup with different libraries? > > On Nov 13, 2010 2:42 AM, "Adrian Schröter" <adrian(a)suse.de> wrote: > > Am Freitag, 12. November 2010, 22:44:08 schrieb Douglas Hubler: > >> I tried >> - googling the error and it's not clear to me what the real issue is. >> - Fedora 12 64 b... > > Can you find out, what kernel module your code is trying to use here ? > > Either we should provide this module (eG when it is ext4) or the test > suite should maybe not rely on specific kernel modules. Or at least test > if they are available at all. > > bye > adrian > >> >> Build Log Fragment >> >> gwt.compile.module.userportal: >> Nov 12, 2010 9:33:44 PM java.util.pre... > >> >> N��r��y隊Z)z{.��Wlz��qﮞ˛��m�)z{.��+�Z+i�b�*'jW(�f�vǦj)h��Ǜ�)]��Ǿ��i�� >> �� > > > -- > Adrian Schroeter > SUSE Linux Products GmbH > email: adrian(a)suse.de > -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-buildservice+help(a)opensuse.org

1 0

[opensuse-buildservice] New top-level project: utilities
by Pascal Bleser 15 Nov '10

15 Nov '10

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Marcus was so kind to create a new top-level project: utilities I requested (*) such a project because there wasn't any appropriate place to maintain packages of command-line utilities, such as cpipe, mlocate, lockrun, likwid, pfm, pv, ttyrec, ack, calcurse, cdu, clpbar, cpuid, di, dtach, gcp, jobqueue, ts, mguesser, ncdu, nkmkpassword, pipemeter, progress, rand, rlwrap, tmux, xjobs, waitfor, ..... (just throwing a few I have in the queue for that project). Anyhow, the idea is to maintain (supposedly "small") command-line utilities in there that don't really fit any other category (server, monitoring, web, irc, ...) If anyone else wants to be maintainer, please poke me. (*) https://bugzilla.novell.com/show_bug.cgi?id=635617 cheers - -- -o) Pascal Bleser <pascal.bleser(a)opensuse.org> /\\ http://opensuse.org -- I took the green pill _\_v FOSDEM XI: 5 + 6 Feb 2011, http://fosdem.org -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.15 (GNU/Linux) iD8DBQFM2YwFr3NMWliFcXcRAqo+AJ4uTViJhzYiC5LsNH+5UI3vzCqx3QCgl+qV skKvbr/nvIpLkmYsG2YIYLI= =N8mA -----END PGP SIGNATURE----- -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-buildservice+help(a)opensuse.org

3 3

[opensuse-buildservice] OpenJDK crash only on CentOS 5 / 64bit
by Douglas Hubler 13 Nov '10

13 Nov '10

I tried - googling the error and it's not clear to me what the real issue is. - Fedora 12 64 bit on OBS is fine - CentOS 5 32 bit on OBS is fine Full log https://build.opensuse.org/package/live_build_log?arch=x86_64&package=sipxc… Build Log Fragment gwt.compile.module.userportal: Nov 12, 2010 9:33:44 PM java.util.prefs.FileSystemPreferences$2 run INFO: Created user preferences directory. modprobe: FATAL: Could not load /lib/modules/2.6.27.42-0.1-xen/modules.dep: No such file or directory Compiling module org.sipfoundry.sipxconfig.userportal.user_phonebook_search # # An unexpected error has been detected by Java Runtime Environment: # # SIGSEGV (0xb) at pc=0x00007f7419b28821, pid=4224, tid=1102936384 # # Java VM: OpenJDK 64-Bit Server VM (1.6.0-b09 mixed mode linux-amd64) # Problematic frame: # V [libjvm.so+0x20a821] # # An error report file with more information is saved as: # /usr/src/redhat/BUILD/sipxconfig-0.4.4/gwt/hs_err_pid4224.log # # If you would like to submit a bug report, please visit: # http://icedtea.classpath.org/bugzilla # The crash happened outside the Java Virtual Machine in native code. # See problematic frame for where to report the bug. # Java Result: 134 N��r��y隊Z)z{.��Wlz��qﮞ˛��m�)z{.��+�Z+i�b�*'jW(�f�vǦj)h��Ǜ�)]��Ǿ��i��

2 1

[opensuse-buildservice] Substitute: in prjconf doesn't work
by Stephan Kleine 13 Nov '10

13 Nov '10

Hi folks, I have %if 0%{?ubuntu_version} > 1004 Substitute: libqt4-dev libqtwebkit-dev %endif in the prjconf of home:bitshuffler:test/gsd Still my builds fail with Building gsd.dsc for xUbuntu_10.04/x86_64 Getting buildinfo from server and store to /home/stephan/home:bitshuffler:test/gsd/.osc/_buildinfo-xUbuntu_10.04- x86_64.xml Getting buildconfig from server and store to /home/stephan/home:bitshuffler:test/gsd/.osc/_buildconfig-xUbuntu_10.04-x86_64 buildinfo is broken... it says: unresolvable: nothing provides libqtwebkit-dev on 10.04 which is fine since libqtwebkit-dev doesn't exist here cause it got introduced with 10.10 but to the best of my knowledge the %if clause in the prjconf should cover that. IOW: how to replace "libqt4-dev" with "libqtwebkit-dev" in >= Ubuntu 10.10? regards, Stephan -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-buildservice+help(a)opensuse.org

1 1

[opensuse-buildservice] How to upgrade key under debian.
by Paul Elliott 12 Nov '10

12 Nov '10

Under debian when I do a apt-get update I get: W: GPG error: http://widehat.opensuse.org ./ Release: The following signatures were invalid: KEYEXPIRED 1270155763 How do I update these keys? Thank You. -- Paul Elliott 1(512)837-1096 pelliott(a)BlackPatchPanel.com PMB 181, 11900 Metric Blvd Suite J http://www.free.blackpatchpanel.com/pme/ Austin TX 78758-3117

3 5

[opensuse-buildservice] Re: blocked by the acl with the new 2.1
by Dominique Le Foll 12 Nov '10

12 Nov '10

Hello, I progress in the understanding of the issue. I was using osc 0.129 which is delivered with the appliance on the appliance itself. A simple switch to run the osc on an other pc (un ubuntu running osc 0.125) has fixed the issue and runing with the osc 1.28 provided by the MeeGo Tool page also works well. Odd. I do not know if the problem is specific to the osc delivered with the appliance 2.1 (osc 0.129) or to the fact that we were runing the osc command on the obs server appliance itself (our goal was to transfer a full set of repo, running the script on the appliance was saving network traffic). But there is a compatibility issue somewhere either with osc 0.129 or I guess more loikly when osc is runon the obs-server directly. Regards Dominique P.S. A good documentation on the acl would be welcomed. 2010/11/10 Dominique Le Foll <dominig(a)fridu.net>: > Hello, > > I have just loaded a new OBS appliance on a brand new server. > The version of the day was -> obs-server.x86_64-2.1.1-Build1.7.raw.bz2 > > The install went as usual (I use a raid soft with an lvm and copy the raw > appliance on the disk /dev/sda. > > I then created a user and try to copy my project from my source obs to my > new target, there started the problem. I was rejected with an error (no > permission). > > To narrow down the issue I have restarted from scratch and created a user > amino, with that user I have created a project in my home directory and > uploaded a file in a package named test via the WebUI -> no Issue until > there. > > Then I have checked out my package test in my home directory with osc > (version 0.129) > Modified the file locally on my PC and try to check it back in -> ERROR. > > I have the same error > osc ci > WARNING: validator directory /usr/lib/osc/source_validators configured, > but not existing (please install osc-source_validator). Skipping ... > Sending test.txt > Transmitting file data .Server returned an error: HTTP Error 403: > Forbidden > Insufficient permissions to store file in package test2, project > home:amino > > I have also added the full log with the option -H at the end of this > mail. > > It looks like an acl issue but I have not changed the default. > Do I have to do any thing special with that new release. My preparation test > with the release obs-server.x86_64-2.1.0-Build2.3.raw.bz2 did not prepared > me to that issue. > > - Where sits the acl? > - are they activated by default ? > - do I need a special version of osc ? > - other ? > -- > Dominig > > osc -H ci > WARNING: validator directory /usr/lib/osc/source_validators configured, but > not existing (please install osc-source_validator). Skipping ... > > > -- GET http://obs-server.bluestreaktech.com:81/source/home:amino > send: 'GET /source/home:amino HTTP/1.1\r\nAccept-Encoding: identity\r\nHost: > obs-server.bluestreaktech.com:81\r\nConnection: close\r\nUser-Agent: > osc/0.129\r\n\r\n' > reply: 'HTTP/1.1 200 OK\r\n' > header: ETag: "a6b6786cb9159000047999d2966129b3" > header: X-Opensuse-APIVersion: 2.1.0 > header: Content-Type: text/xml; charset=utf-8 > header: X-Runtime: 4 > header: Content-Length: 82 > header: Cache-Control: private, max-age=0, must-revalidate > header: Connection: close > header: Date: Wed, 10 Nov 2010 15:01:37 GMT > header: Server: lighttpd/1.4.26 > > > -- GET > http://obs-server.bluestreaktech.com:81/source/home:amino/test2?rev=latest > send: 'GET /source/home:amino/test2?rev=latest HTTP/1.1\r\nAccept-Encoding: > identity\r\nHost: obs-server.bluestreaktech.com:81\r\nConnection: > close\r\nUser-Agent: osc/0.129\r\n\r\n' > reply: 'HTTP/1.1 200 OK\r\n' > header: X-Opensuse-APIVersion: 2.1.0 > header: Content-Transfer-Encoding: binary > header: X-Runtime: 10 > header: Content-Type: text/xml > header: Content-Disposition: attachment > header: Content-Length: 192 > header: Cache-Control: private > header: Connection: close > header: Date: Wed, 10 Nov 2010 15:01:37 GMT > header: Server: lighttpd/1.4.26 > Sending test.txt > Transmitting file data . > > -- PUT > http://obs-server.bluestreaktech.com:81/source/home:amino/test2/test.txt?re… > send: 'PUT /source/home:amino/test2/test.txt?rev=upload > HTTP/1.1\r\nAccept-Encoding: identity\r\nContent-Length: 11\r\nHost: > obs-server.bluestreaktech.com:81\r\nContent-Type: > application/octet-stream\r\nConnection: close\r\nUser-Agent: > osc/0.129\r\n\r\n' > send: 'test\ntest2\n' > reply: 'HTTP/1.1 403 Forbidden\r\n' > header: X-Opensuse-APIVersion: 2.1.0 > header: Content-Type: application/xml; charset=utf-8 > header: X-Runtime: 11 > header: X-Opensuse-Errorcode: put_file_no_permission > header: Content-Length: 207 > header: Cache-Control: no-cache > header: Connection: close > header: Date: Wed, 10 Nov 2010 15:01:37 GMT > header: Server: lighttpd/1.4.26 > > > -- POST > http://obs-server.bluestreaktech.com:81/source/home:amino/test2?cmd=deleteu… > send: 'POST /source/home:amino/test2?cmd=deleteuploadrev > HTTP/1.1\r\nAccept-Encoding: identity\r\nContent-Length: 0\r\nHost: > obs-server.bluestreaktech.com:81\r\nContent-Type: > application/x-www-form-urlencoded\r\nConnection: close\r\nUser-Agent: > osc/0.129\r\n\r\n' > reply: 'HTTP/1.1 403 Forbidden\r\n' > header: X-Opensuse-APIVersion: 2.1.0 > header: Content-Type: application/xml; charset=utf-8 > header: X-Runtime: 12 > header: X-Opensuse-Errorcode: cmd_execution_no_permission > header: Content-Length: 187 > header: Cache-Control: no-cache > header: Connection: close > header: Date: Wed, 10 Nov 2010 15:01:37 GMT > header: Server: lighttpd/1.4.26 > Server returned an error: HTTP Error 403: Forbidden > Insufficient permissions to store file in package test2, project home:amino > amino@obs-server:~/BLUE/home:amino/test2> > -- Dominique Le Foll -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-buildservice+help(a)opensuse.org

2 1

[opensuse-buildservice] boot strap a private obs 2.1 instance
by Dominique Le Foll 12 Nov '10

12 Nov '10

Hello, I have just installed a private instance of OBS 2.1 (via an appliance) and now that I have copied all the requires source rpm in my base project (MeeGo 1.0) and I try to boot strap it. I use a bootstap process that I defined with the help of Rolla that I have documented in the OBS wiki at : http://en.opensuse.org/openSUSE:Build_Service_private_instance_boot_strappi… Unfortunatly that process does not work anymore. With the old OBS (1.8) once you have transfered all the rpm source for your base project, obs would start to build but would just never converge. That was fixed by copying all the file from the :full directory of your working OBS in the :full directory of the target OBS and restarting the scheduler. The error that I have with 2.1 is very different. Each packages complains about extension missing critical packages, which are actually provided by packages present in the boot strap base project. I have no idea how to debug why the system complains about lacking packages which are present. I wonder building against a remote instance could fix that issue but I do not find any documentation about building against a remote repo. Any help would be appriciated. Dominig -- Dominique Le Foll -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-buildservice+help(a)opensuse.org

3 4

[opensuse-buildservice] OBS 2.1.2 released
by Adrian Schröter 11 Nov '10

11 Nov '10

openSUSE Build Service 2.1.2 released ===================================== Users of OBS 2.1.0 and 2.1.1 should update if they rely on the source read access protection. We fixed a security leak here. This release is also fixing a regression of 2.1.1 for iChain users. New users were not able to register. Users who want to build for Ubuntu:10.10 need also the new build package from today. Support for RHEL-6 and Fedora:14 has been added as well. Updaters from any OBS 2.1 release can just upgrade the packages and restart all services. Updaters from former releases should read the README.UPDATERS file. It got released to the ususal places: Appliance: http://en.opensuse.org/openSUSE:Build_Service_Appliance Packages: http://download.opensuse.org/repositories/openSUSE:/Tools/ Git: http://www.gitorious.org/opensuse/build-service/commits/2.1 Please find the release notes below for more details: Feature backport: ================= * api: Support deletion of binaries in _repository (FATE #310489) Changes: ======== * backend: Make OBS interconnect more reliable by retrying multiple times on not reachable remote instances * api: XML schema of _link files is not enforcing the element order anymore * api: submit requests do not modify link target definitions anymore. * api: updated default build target list * webui: Removed "Add as patch" functionality as it can not work with branched links. Bugfixes: ========= * backend: Security bugfix which allowed access to "sourceaccess" protected sources * backend: XPATH query fix * api: layout fixes * webui: fixing new user registration when using iChain (regression introduced in 2.1.1) * webui: layout fixes -- Adrian Schroeter SUSE Linux Products GmbH email: adrian(a)suse.de -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-buildservice+help(a)opensuse.org

1 0