openSUSE Build Service June 2007

buildservice@lists.opensuse.org

48 participants
67 discussions

[opensuse-buildservice] Re: openSUSE BuildSystem: Problem, Tidy im Build System zu bauen (Changelog-Problem?)
by Sierk Bornemann 22 Jun '07

22 Jun '07

Hallo! Ich bin Maintainer des tidy packages für openSUSE (http:// software.opensuse.org/download/Tidy/). Seit vorhin versuche ich, im openSUSE Build System das Tidy package neu zu builden, nachdem ich die Sourcen aktualisiert habe. Ständig moniert mir aber das Build System, dass da anscheinend etwas nicht in Ordnung ist mit dem Changelog bzw. dessen chronologischer Reihenfolge: "error: %changelog not in descending chronological order" Obwohl ich nur 2 Changelog-Einträge oben an das bisher bestehende Changelog drangefügt habe und es vorher immer anscheinend anstandslos zu builden ging, geht es jetzt aufeinmal nicht mehr. Wurde da was fundemental im Buildsystem geändert? Ich kann im Changelog trotz mehrfacher Durchsicht und auch Korrektur keinen Fehler entdecken, verstehe die entsprechend ausgeworfenen Meldungen des Buildlogs nicht. Ich wäre sehr dankbar, wenn sich jemand Befugtes der Sache mal annehmen und entsprechende Richtigstellungen im tidy Specfile wie auch in der tidy.changes-Datei vornehmen könnte (incl. anschließendem Rebuild), damit wieder aktuelle Tidy-Pakete zur Verfügung stehen. Oder mir oder Peter Poeml entspr. Bescheid geben. Peter Poeml von SUSE, Co-Maintainer des Pakets habe ich heute schon Bescheid gesagt, er hat mich mit diesem Ansinnen und zur Lösung des Problems an diese Liste hier verwiesen. Ich bin erst Montag wieder online und könnte Änderungen vornehmen, wäre schön, wenn eine Lösung auch ohne mein Zutun möglich wäre. Danke und Gruß, Sierk Bornemann -- Sierk Bornemann Maintainer http://software.opensuse.org/download/Tidy/ email: sierkb(a)gmx.de WWW: http://sierkbornemann.de/ --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-buildservice+help(a)opensuse.org

3 2

[opensuse-buildservice] file-transfer with osc
by Jan-Simon Möller 22 Jun '07

22 Jun '07

There must be another issue ... i created a new project, uploaded the archive, next up, it complained, so i saved the "orig" file and did up: -rw-r--r-- 1 dl9pf users 253014 2007-06-21 22:49 xdx-2.2.tar.gz -rw-r--r-- 1 dl9pf users 253015 2007-06-21 22:20 xdx-2.2.tar.gz.orig look at the sizes ! Greets Jan-Simon --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-buildservice+help(a)opensuse.org

3 4

[opensuse-buildservice] Little Bug in osc
by Jan-Simon Möller 22 Jun '07

22 Jun '07

Hi! osc createpac home:dl9pf:hamradio xdx Sending meta data... Done. Try again? (yY = Yes - nN = No): ^^^^^^ try again although its already "Done" --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-buildservice+help(a)opensuse.org

3 2

[opensuse-buildservice] Uploads cause 500 Internal Server Error
by Pascal Bleser 21 Jun '07

21 Jun '07

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Seems no one has reported it on the mailing-list yet, so.. ;) Uploading files with osc cause 500 Internal Server Errors: .../server:messaging/mcabber> osc commit Sending mcabber-0.9.3.tar.bz2 Deleting mcabber-0.9.2.tar.bz2 Sending mcabber.spec ... urllib2.HTTPError: HTTP Error 500: Internal Server Error Could to be related to the size of the file, as I was able to upload the spec, but not the tarball. Complete osc trace is attached, might be helpful. Using the web UI worked. Dunno whether it's spurious or only fails with osc though. cheers - -- -o) Pascal Bleser http://linux01.gwdg.de/~pbleser/ /\\ <pascal.bleser(a)skynet.be> <guru(a)unixtech.be> _\_v The more things change, the more they stay insane. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.5 (GNU/Linux) Comment: Using GnuPG with SUSE - http://enigmail.mozdev.org iD8DBQFGeFnmr3NMWliFcXcRArAWAJ9Ks39R79xz2h1oCAh7H9uG/sFCzACfQPjm g2Ba4Rj5WeprT8imDxyO+4c= =wWnR -----END PGP SIGNATURE----- Transmitting file data .Traceback (most recent call last): File "/usr/bin/osc", line 7, in <module> commandline.main() File "/usr/lib64/python2.5/site-packages/osc/commandline.py", line 1080, in main cmd(args) File "/usr/lib64/python2.5/site-packages/osc/commandline.py", line 513, in commit p.put_source_file(filename) File "/usr/lib64/python2.5/site-packages/osc/core.py", line 300, in put_source_file http_PUT(u, file = os.path.join(self.dir, n)) File "/usr/lib64/python2.5/site-packages/osc/core.py", line 686, in http_PUT def http_PUT(*args, **kwargs): return http_request('PUT', *args, **kwargs) File "/usr/lib64/python2.5/site-packages/osc/core.py", line 675, in http_request fd = urllib2.urlopen(req, data=data) File "/usr/lib64/python2.5/urllib2.py", line 121, in urlopen return _opener.open(url, data) File "/usr/lib64/python2.5/urllib2.py", line 380, in open response = meth(req, response) File "/usr/lib64/python2.5/urllib2.py", line 491, in http_response 'http', request, response, code, msg, hdrs) File "/usr/lib64/python2.5/urllib2.py", line 412, in error result = self._call_chain(*args) File "/usr/lib64/python2.5/urllib2.py", line 353, in _call_chain result = func(*args) File "/usr/lib64/python2.5/urllib2.py", line 817, in http_error_401 url, req, headers) File "/usr/lib64/python2.5/urllib2.py", line 795, in http_error_auth_reqed return self.retry_http_basic_auth(host, req, realm) File "/usr/lib64/python2.5/urllib2.py", line 805, in retry_http_basic_auth return self.parent.open(req) File "/usr/lib64/python2.5/urllib2.py", line 380, in open response = meth(req, response) File "/usr/lib64/python2.5/urllib2.py", line 491, in http_response 'http', request, response, code, msg, hdrs) File "/usr/lib64/python2.5/urllib2.py", line 418, in error return self._call_chain(*args) File "/usr/lib64/python2.5/urllib2.py", line 353, in _call_chain result = func(*args) File "/usr/lib64/python2.5/urllib2.py", line 499, in http_error_default raise HTTPError(req.get_full_url(), code, msg, hdrs, fp)

5 10

[opensuse-buildservice] Running "apt-get update" fails
by Andrew Beekhof 20 Jun '07

20 Jun '07

Is this a known problem? Or perhaps not (yet) supported? Running "apt-get update" results in: Failed to fetch http://software.opensuse.org/download/server:/ha- clustering/Debian_Etch/Packages.gz 302 Moved Temporarily I'm told that apparently apt-get/aptitude doesn't "do" http redirects. Andrew --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-buildservice+help(a)opensuse.org

2 1

[opensuse-buildservice] Build issues on host build17
by Jan-Simon Möller 20 Jun '07

20 Jun '07

Output: build17 started "build aprsd.spec" at Wed Jun 20 08:58:39 UTC 2007. Building aprsd for project 'hamradio' repository 'openSUSE_Factory' arch 'i586' srcmd5 '06df65bd07462ef470e58f860ef30462 Using BUILD_ROOT=/abuild/root_1/.mount Using BUILD_ARCH=i586:i486:i386 Doing XEN build in /abuild/root_1/root processing specfile /abuild/root_1/.build-srcdir/aprsd.spec... running changelog2spec --target rpm --file /abuild/root_1/.build-srcdir/aprsd.spec init_buildsystem --rpmlist /abuild/root_1/.rpmlist aprsd.spec ... preinstalling aaa_base... preinstalling acl... preinstalling attr... preinstalling bash... preinstalling coreutils... preinstalling diffutils... preinstalling filesystem... preinstalling fillup... preinstalling glibc... preinstalling grep... preinstalling insserv... preinstalling libacl... preinstalling libattr... preinstalling libbz2-1... preinstalling libgcc41... preinstalling libxcrypt... preinstalling m4... preinstalling ncurses... preinstalling pam... preinstalling permissions... preinstalling popt... preinstalling pwdutils... preinstalling readline... preinstalling rpm... preinstalling sed... preinstalling tar... preinstalling zlib... preinstalling util-linux... preinstalling perl-base... preinstalling libdb-4_5... preinstalling libvolume_id... copying packages... reordering...done starting xen virtual machine ERROR Internal error: Could not obtain handle on privileged command interface (2 = No such file or directory) ERROR Internal error: Could not obtain handle on privileged command interface (2 = No such file or directory) ERROR Internal error: Could not obtain handle on privileged command interface (2 = No such file or directory) ERROR Internal error: Could not obtain handle on privileged command interface (2 = No such file or directory) ERROR Internal error: Could not obtain handle on privileged command interface (2 = No such file or directory) ERROR Internal error: Could not obtain handle on privileged command interface (2 = No such file or directory) ERROR Internal error: Could not obtain handle on privileged command interface (2 = No such file or directory) ERROR Internal error: Could not obtain handle on privileged command interface (2 = No such file or directory) ERROR Internal error: Could not obtain handle on privileged command interface (2 = No such file or directory) Error: Unable to connect to xend: Connection refused. Is xend running? Using config file "/var/run/bsworker_1/build/xen.conf". --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-buildservice+help(a)opensuse.org

2 1

[opensuse-buildservice] modification of the release tag
by Dries Verachtert 20 Jun '07

20 Jun '07

Hello, Where can i find the piece of code which alters the release tag of the spec file? Is there maybe a way to avoid or influence this behaviour? For example the following is logged in the build log: I have the following modifications for aget-openSUSE_10.2.spec: 10c10 < Release: 5.2.opensuse10.2.rf --- > Release: 17.1 How is the '17' and the '1' calculated? Is it possible to append or prepend something? kind regards, Dries --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-buildservice+help(a)opensuse.org

7 11

[opensuse-buildservice] new project utilities
by Petr Cerny 19 Jun '07

19 Jun '07

Hi all, would it be possible to create a new project for (misc) utilities (mostly console)? Right now I have one package which I think doesn't fit well into other projects: text pager most (/home:peterph most) Best regards Petr --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-buildservice+help(a)opensuse.org

1 0

[opensuse-buildservice] Mandriva 2007 fontconfig errror causes build to loop
by Amilcar do Carmo Lucas 19 Jun '07

19 Jun '07

Hi all, As we all know, Mandriva_2007 is pretty broken and fails with this error: installing fontconfig-2.4.1-1mdv2007.0 /usr/bin/fc-cache: error while loading shared libraries: libfontconfig.so.1: cannot open shared object file: No such file or directory error: %post(fontconfig-2.4.1-1mdv2007.0.i586) scriptlet failed, exit status 127 But now, besides getting that error, the build system re-builds it over and over again. Ad-infinitum, because it never manages to build successfully. Could someone take a look at it ? Many thanks, -- Amilcar Lucas Webmaster The KDevelop project --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-buildservice+help(a)opensuse.org

1 0

[opensuse-buildservice] Disambiguating SUSE build tutorials
by Will Stephenson 18 Jun '07

18 Jun '07

I just spoke to someone who read http://en.opensuse.org/SUSE_Build_Tutorial thinking it was http://en.opensuse.org/Build_Service_Tutorial#Build_your_package_locally Does anyone with more wiki skill than me feel like adding a 'disambiguation' type boxout so that the relevant audience finds the right tutorial? Will -- Desktop Engineer Interfaces and Applications Team --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-buildservice+help(a)opensuse.org

2 1

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

openSUSE Build Service June 2007