- openSUSE Support

[opensuse-support] test
by stakanov 22 Feb '19

22 Feb '19

registered but never received a single mail.... _________________________________________________________________ ________________________________________________________ Ihre E-Mail-Postf�cher sicher & zentral an einem Ort. Jetzt wechseln und alte E-Mail-Adresse mitnehmen! https://www.eclipso.de -- To unsubscribe, e-mail: opensuse-support+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-support+owner(a)opensuse.org

3 2

[opensuse-support] I can't start acroread
by Carlos E. R. 21 Feb '19

21 Feb '19

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi, I got it started once, after that it crashes. I'm on 15.0, and I'm using the original package, AdbeRdr9.5.5-1_i486linux_enu.rpm, and I copied: /usr/lib/libxcb.so.1 /usr/lib/libxcb.so.1.1.0 /usr/lib/libpcre.so.1 /usr/lib/libpcre.so.1.2.7 to /opt/lib/Adobe/Reader9/Reader/intellinux/lib, as we found out in this thread: +++----------------- Date: Thu, 28 Jun 2018 15:28:08 +0200 From: Carlos E. R. <...(a)telefonica.net> To: oS-en <opensuse(a)opensuse.org> Subject: Re: [opensuse] Adobe Reader no longer works - 15.0 - notes - -----------------++- As I said, it started once, but subsequently it crashes. So I did: strace -o adobe.strace acroread And the end of the file is: ... access("/etc/fonts/conf.d/13-selective-rendering.conf", R_OK) = 0 stat64("/etc/fonts/conf.d/13-selective-rendering.conf", {st_mode=S_IFREG|0644, st_size=5488, ...}) = 0 openat(AT_FDCWD, "/etc/fonts/conf.d/13-selective-rendering.conf", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = 6 read(6, "<?xml version='1.0'?>\n<!DOCTYPE "..., 8192) = 5488 read(6, "", 8192) = 0 close(6) = 0 getrandom("\xd9\x5e\x46\xc5", 4, GRND_NONBLOCK) = 4 access("/etc/fonts/conf.d/20-unhint-small-vera.conf", R_OK) = 0 stat64("/etc/fonts/conf.d/20-unhint-small-vera.conf", {st_mode=S_IFREG|0644, st_size=1259, ...}) = 0 openat(AT_FDCWD, "/etc/fonts/conf.d/20-unhint-small-vera.conf", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = 6 read(6, "<?xml version=\"1.0\"?>\n<!DOCTYPE "..., 8192) = 1259 read(6, "", 8192) = 0 close(6) = 0 getrandom("\x19\x35\x2e\x57", 4, GRND_NONBLOCK) = 4 access("/etc/fonts/conf.d/30-metric-aliases.conf", R_OK) = 0 stat64("/etc/fonts/conf.d/30-metric-aliases.conf", {st_mode=S_IFREG|0644, st_size=18121, ...}) = 0 openat(AT_FDCWD, "/etc/fonts/conf.d/30-metric-aliases.conf", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = 6 read(6, "<?xml version=\"1.0\"?>\n<!DOCTYPE "..., 8192) = 8192 read(6, "ol>true</bool></test>\n\t <family"..., 8192) = 8192 read(6, "rue</bool></test>\n\t <family>Ari"..., 8192) = 1737 read(6, "", 8192) = 0 close(6) = 0 brk(0xa036000) = 0xa036000 getrandom("\x1c\x90\x7f\x80", 4, GRND_NONBLOCK) = 4 access("/etc/fonts/conf.d/31-cantarell.conf", R_OK) = 0 stat64("/etc/fonts/conf.d/31-cantarell.conf", {st_mode=S_IFREG|0644, st_size=440, ...}) = 0 openat(AT_FDCWD, "/etc/fonts/conf.d/31-cantarell.conf", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = 6 read(6, "<?xml version=\"1.0\" encoding=\"UT"..., 8192) = 440 read(6, "", 8192) = 0 close(6) = 0 getrandom("\x56\xd8\xf2\x59", 4, GRND_NONBLOCK) = 4 access("/etc/fonts/conf.d/31-linux-libertine.conf", R_OK) = 0 stat64("/etc/fonts/conf.d/31-linux-libertine.conf", {st_mode=S_IFREG|0644, st_size=986, ...}) = 0 openat(AT_FDCWD, "/etc/fonts/conf.d/31-linux-libertine.conf", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 EACCES (Permission denied) access("/etc/fonts/conf.d/31-metric-aliases-bw.conf", R_OK) = 0 stat64("/etc/fonts/conf.d/31-metric-aliases-bw.conf", {st_mode=S_IFREG|0644, st_size=2039, ...}) = 0 openat(AT_FDCWD, "/etc/fonts/conf.d/31-metric-aliases-bw.conf", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = 6 read(6, "<?xml version=\"1.0\"?>\n<!DOCTYPE "..., 8192) = 2039 read(6, "", 8192) = 0 close(6) = 0 getrandom("\x69\xb2\xbb\xf4", 4, GRND_NONBLOCK) = 4 - --- SIGSEGV {si_signo=SIGSEGV, si_code=SEGV_MAPERR, si_addr=0x6374652f} --- getpid() = 9787 rt_sigaction(SIGABRT, {sa_handler=SIG_DFL, sa_mask=[ABRT], sa_flags=SA_RESTART}, {sa_handler=0x850aafa, sa_mask=[], sa_flags=0}, 8) = 0 exit_group(1) = ? +++ exited with 1 +++ What does that mean, what is wrong? On my small laptop it works fine, same package, same modifications. - -- Cheers Carlos E. R. (from 15.0 x86_64 at Telcontar) -----BEGIN PGP SIGNATURE----- iHoEARECADoWIQQZEb51mJKK1KpcU/W1MxgcbY1H1QUCXG6j+Rwccm9iaW4ubGlz dGFzQHRlbGVmb25pY2EubmV0AAoJELUzGBxtjUfV+/wAoJcIijjjnRckpqHOQKy8 wMHl6IMRAKCKUMG4zyAkEmOOuSsW8dlBmahITg== =+WSc -----END PGP SIGNATURE----- -- To unsubscribe, e-mail: opensuse-support+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-support+owner(a)opensuse.org

1 0

[opensuse-support] Where'd `man ascii` go?
by Michael Fischer 20 Feb '19

20 Feb '19

Been typing `man ascii` for years, I find that on 15, it is not present. `zypper se ascii` didn't give me anything that screamed out as the obvious answer. Suggestions? TIA. Michael -- Michael Fischer michael(a)visv.net -- To unsubscribe, e-mail: opensuse-support+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-support+owner(a)opensuse.org

7 13

[opensuse-support] Leap and Tumbleweed install GRUB2 in same ESP-directory
by Hagen Buliwyf 18 Feb '19

18 Feb '19

Both openSUSE Leap 15.0 and openSUSE Tumbleweed install GRUB2 bootloader files (on an UEFI system) in "\EFI\opensuse". Consulting the GRUB2 manual shows that "grub-install --target=x86_64-efi --bootloader-id="name_of_directory" would allow for different names (like "opensuse" and "tumbleweed"). How can i change this behavior and make each OS installing its bootloader files in its own directory? Thank you for any hint. Regards Hagen PS I'm aware that i could use separat ESPs or handle GRUB2 manually. But that is not what i want. -- To unsubscribe, e-mail: opensuse-support+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-support+owner(a)opensuse.org

5 18

[opensuse-support] XFCE fails to hibernate laptop when battery is 4%
by Carlos E. R. 16 Feb '19

16 Feb '19

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi, I forgot to connect the power cable to my laptop some few hours ago. Now suddenly I remember it is ON, I look at it. The machine asks for my screensaver password. I enter, and view a popup that is asking for my root password to hibernate, while the power bar says 4%. Battery is 4%, and it asks for my root password to hibernate? :-/ (This bug has been reported for years!) - -- Cheers Carlos E. R. (from 15.0 x86_64 at Telcontar) -----BEGIN PGP SIGNATURE----- iHoEARECADoWIQQZEb51mJKK1KpcU/W1MxgcbY1H1QUCXGgeWhwccm9iaW4ubGlz dGFzQHRlbGVmb25pY2EubmV0AAoJELUzGBxtjUfVd0wAn07e15M/RWBA3/7q5r1N diTVfZTbAJ0ftcselH2FcNoIj3KBC5bcB1Rt2A== =PS/h -----END PGP SIGNATURE----- -- To unsubscribe, e-mail: opensuse-support+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-support+owner(a)opensuse.org

1 0

[opensuse-support] yast install
by jdd＠dodin.org 15 Feb '19

15 Feb '19

hello, I'm still in the way of restoring a 42.3 system (see thread catastrofic update), but now the system boots 42.3. Not in graphic mode, nor with networks, but it boots. I can access it via rescue system (chrooted), the main system provide networks. but if zypper works, yast don't # yast /sbin/yast: /usr/lib/YaST2/bin/y2start: /usr/bin/ruby: bad interpreter: No such file or directory reinstalling ruby don't solve the problem idea? thanks jdd -- http://dodin.org -- To unsubscribe, e-mail: opensuse-support+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-support+owner(a)opensuse.org

2 3

[opensuse-support] Google Titan Security key bundle.
by Steven Hess 12 Feb '19

12 Feb '19

I am looking to use Google's Titan security keys with Chrome / Gmail. Is there any additional package I need to install to get this working with openSUSE Tumbleweed? I want to be set before I register my keys and set of 2FA on my Google account. Thanks Steven -- ____________ Apply appropriate technology. Use what works without prejudice. Steven L Hess ARS KC6KGE DM05gd22 Owner Flex-1500 and Flex-3000 Flex-6300, FT-857D, FT-817ND 927.0875Mhz, 441.125 analog 441.575 DMR & 441.600 Fusion Repeaters Taft Ca. openSUSE Tumbleweed KDE Plasma with Packman -- To unsubscribe, e-mail: opensuse-support+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-support+owner(a)opensuse.org

1 0

[opensuse-support] screen resolution changes after switching off and on second monitor
by mh＠mike.franken.de 11 Feb '19

11 Feb '19

Hi *, I am using Tumbleweed with latest snapshots on a DELL XPS 13. Besides the internal screen an external monitor is connected via Thunderbolt dock / mini display port. I modified /usr/share/sddm/scripts/Xsetup and switched off the internal monitor via xrandr, whenever an external monitor is connected. Otherwise the internal screen stays primary. When switching off the external monitor, the internal monitor stays off, which is perfectly ok. Switching on the external monitor again, leads to my actual problem, though: The internal monitor gets switched on for a second, then gets switched off again, and the external monitor shows the desktop. For the second the internal monitor is on, screen resolution changes forth to the resolution of the internal monitor and back to the resolution of the external monitor. This leads to a completely distorted desktop regarding my own windows. Plasma itself obviously can cope with the fast change in resolution. Switching off kscreen2 stops that switching, but I loose a few other features. Is there any setting to tell kscreen2 not to activate the internal screen in this case, but instead directly use the external one? I hope this description was not too confusing ;) TIA. Bye. Michael. -- Michael Hirmke -- To unsubscribe, e-mail: opensuse-support+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-support+owner(a)opensuse.org

3 6

[opensuse-support] Cloud-init and Kubic
by Tardif, Christian 11 Feb '19

11 Feb '19

Hi, I'm trying to configure Kubic with the help of cloud-init. I'm using openSUSE-Tumbleweed-Kubic.x86_64-15.0-MicroOS-cri-o-hardware-x86_64-Build4.5.qcow2 as my basic image, then figured out how to create the /cloud-init-config directory, along with included meta-data and user-data files. But after the initial pxeboot, Kubic is restarting as expected, but no cloud-init action is actually performed. What am I missing ? Is there anything specific I need to tell Kubic in order for it to take cloud-init local files into account? Thanks, -- Christian Tardif Architecte principal infonuagique | Cloud computing senior Architect Network IaaS Bell Canada 671, de la Gauchetière Ouest, suite 527 Montréal (Québec) H3B 2M8 T : 514.391.6635, C : 514.237.6332, F : 514.391.6690 Email: christian.tardif(a)bell.ca<mailto:christian.tardif@bell.ca> [cid:image001.jpg@01CB84AF.1C6FBFE0]

1 0

[opensuse-support] Closing Soon: Reminder
by Fraser_Bell 11 Feb '19

11 Feb '19

IMPORTANT: DO NOT REPLY ON THIS LIST!!! IMPORTANT: DO NOT REPLY ON THIS LIST!!! Replies or comments should be made on the openSUSE Project Mailing List. ================ Balloting for the 2018-2019 openSUSE Board Member Elections closes this Friday, February 15, 2019, at 12h00 UTC. If you have not voted yet, do so now. <url>https://news.opensuse.org/2019/02/10/only-a-few-days-left-to-cast-your-ball…</url> If you are an openSUSE Member and did not recieve your ballot e-mail, contact the Elections Officials immediately. <url>https://en.opensuse.org/openSUSE:Board_election</url> -- -Gerry Makaro openSUSE Board Elections Committee (election-officials **at** openSUSE.org) openSUSE Member openSUSE Global Moderator openSUSE Contributor YaST Contributor aka Fraser_Bell on the Forums, OBS, IRC, and mail at openSUSE.org Fraser-Bell on Github -- To unsubscribe, e-mail: opensuse-support+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-support+owner(a)opensuse.org

1 0