- openSUSE Support

[opensuse-support] Tumbleweed: Not generating service for XDG autostart ??
by Peter McD 12 Oct '20

12 Oct '20

Hi, I get in a new Tumbleweed a set of similar messages from dmesg. The first of that group: 17.608624] systemd-xdg-autostart-generator[1891]: Not generating service for XDG autostart app-kaccess-autostart.service, only Type=Application is supported. The whole set is below. What to do with it? Peter ----------------- [ 17.608624] systemd-xdg-autostart-generator[1891]: Not generating service for XDG autostart app-kaccess-autostart.service, only Type=Application is supported. [ 17.608753] systemd-xdg-autostart-generator[1891]: Not generating service for XDG autostart app-at\x2dspi\x2ddbus\x2dbus-autostart.service, startup phases are not supported. [ 17.609107] systemd-xdg-autostart-generator[1891]: kde-systemd-start-condition not found: No such file or directory [ 17.609243] systemd-xdg-autostart-generator[1891]: Not generating service for XDG autostart app-pulseaudio-autostart.service, startup phases are not supported. [ 17.609377] systemd-xdg-autostart-generator[1891]: kde-systemd-start-condition not found: No such file or directory [ 17.609455] systemd-xdg-autostart-generator[1891]: Not generating service for XDG autostart app-powerdevil-autostart.service, only Type=Application is supported. [ 17.609580] systemd-xdg-autostart-generator[1891]: Not generating service for XDG autostart app-xdg\x2duser\x2ddirs-autostart.service, startup phases are not supported. [ 17.825186] fuse: init (API version 7.31) (End of dmesg) -- To unsubscribe, e-mail: opensuse-support+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-support+owner(a)opensuse.org

2 2

Re: [opensuse-support] upgrade problem
by Doug McGarrett 11 Oct '20

11 Oct '20

On 10/11/20 4:56 PM, Doug McGarrett wrote: > > > On 10/11/20 4:15 PM, Doug McGarrett wrote: >> >> You should have this List of repos - notice the "*NO*" I wrote in the >> table: >>> >>> # | Alias | >>> Name | Enabled | GPG Check | Refresh | >>> Priority | Type | URI | Service >>> ---+--------------------------------------+-----------------------------+---------+-----------+---------+----------+--------+-------------------------------------------------------------------------------------+-------- >>> >>> 1 | SoftMaker_Office_Repository | SoftMaker Office >>> Repository | Yes | (r ) Yes | Yes | 99 | rpm-md | >>> http://shop.softmaker.com/repo/rpm | >>> 2 | education-x86_64 | >>> education-x86_64 | *NO* | (r ) Yes | No | 99 | >>> rpm-md | >>> https://ftp.lysator.liu.se/pub/opensuse/repositories/Education/openSUSE_Tum… >>> | >>> 3 | https-download.opensuse.org-2dfdf701 | >>> openSUSE:Factory | *NO* | (r ) Yes | Yes | 99 | >>> rpm-md | >>> https://download.opensuse.org/repositories/openSUSE:/Factory/snapshot/ >>> | >>> 4 | https-download.opensuse.org-31b27617 | >>> openSUSE:Tumbleweed | *NO* | (r ) Yes | Yes | 99 | >>> rpm-md | >>> https://download.opensuse.org/repositories/openSUSE:/Tumbleweed/standard/ >>> | >>> 5 | https-download.opensuse.org-be2dd36a | >>> KDE:Extra | *NO* | (r ) Yes | >>> Yes | 99 | rpm-md | >>> https://download.opensuse.org/repositories/KDE:/Extra/openSUSE_Tumbleweed/ >>> | >>> 6 | https-download.opensuse.org-d780716b | >>> KDE:Extra | *NO* | (r ) Yes | >>> Yes | 99 | rpm-md | >>> https://download.opensuse.org/repositories/KDE:/Extra/openSUSE_Tumbleweed/ >>> | >>> 7 | repo-debug >>> | openSUSE-Tumbleweed-Debug | No | ---- | ---- >>> | 99 | NONE | >>> http://download.opensuse.org/debug/tumbleweed/repo/oss/ | >>> 8 | repo-non-oss >>> | openSUSE-Tumbleweed-Non-Oss | Yes | (r ) Yes | >>> Yes | 99 | rpm-md | >>> http://download.opensuse.org/tumbleweed/repo/non-oss/ | >>> 9 | repo-oss | openSUSE-Tumbleweed-Oss | Yes | (r ) Yes >>> | Yes | 99 | rpm-md | >>> http://download.opensuse.org/tumbleweed/repo/oss/ | >>> 10 | repo-source >>> | openSUSE-Tumbleweed-Source | No | ---- | ---- >>> | 99 | NONE | >>> http://download.opensuse.org/source/tumbleweed/repo/oss/ | >>> 11 | repo-update >>> | openSUSE-Tumbleweed-Update | Yes | (r ) Yes | Yes | >>> 99 | rpm-md | http://download.opensuse.org/update/tumbleweed/ | >>> >>> >>> I think you added "education-x86_64" to get artha. Artha is >>> currently an official package, you should not need extra repos for >>> it. Thus disable this repo. >>> >>> openSUSE:/Tumbleweed/standard/ is a duplicate of "oss", so disable it. >>> >>> openSUSE:/Factory/snapshot/ will give you trouble, so disable it. >>> >>> "KDE:Extra" you have twice, so at least remove one. And unless you >>> know why you have it, remove (or disable) both. >>> >>> >>> >> I cannot seem to get that output now. I forget how I got it, and I >> have checked the earlier emails. I did get software repositories in >> Yast, but not this complete picture. I deleted (I hope) the names >> you wrote NO on in a previous post, but I'm not sure I have the >> correct ones, or all of them. I will try the upgrade again, and see >> what happens. Wish me luck >> >> --doug > Did that. Got a lot of requests to delete somethings or various other > options. Allowed the delete. Don't know what doesn't work anymore, but > scanning still does not. I don't know how to boot from an earlier -- To unsubscribe, e-mail: opensuse-support+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-support+owner(a)opensuse.org

1 0

[opensuse-support] Thunderbird printing previous responses in pale blue
by Doug McGarrett 10 Oct '20

10 Oct '20

Just very recently, received emails by Thunderbird that are quoting a previous email are printing the quote in a light blue text that is hard to read. Can this be fixed, and if so, how? Thanx. --doug -- To unsubscribe, e-mail: opensuse-support+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-support+owner(a)opensuse.org

7 21

[opensuse-support] NVidia 390.138 G04 rpm for 5.8 kernel available
by Patrick Shanahan 09 Oct '20

09 Oct '20

they work for me http://wahoo.no-ip.org/~paka/nvidia-computeG04-390.138-32.1.x86_64.rpm http://wahoo.no-ip.org/~paka/nvidia-gfxG04-kmp-default-390.138_k5.8.7_8-32.… http://wahoo.no-ip.org/~paka/nvidia-glG04-390.138-32.1.x86_64.rpm http://wahoo.no-ip.org/~paka/x11-video-nvidiaG04-390.138-32.1.x86_64.rpm I did not compile nor package them -- (paka)Patrick Shanahan Plainfield, Indiana, USA @ptilopteri http://en.opensuse.org openSUSE Community Member facebook/ptilopteri Photos: http://wahoo.no-ip.org/piwigo paka @ IRCnet freenode -- To unsubscribe, e-mail: opensuse-support+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-support+owner(a)opensuse.org

1 10

[opensuse-support] Network printing using CUPS on Linux
by Marco Calistri 08 Oct '20

08 Oct '20

Dears, I was trying to setup a Printer server using Cups and an HP desk-jet connected via USB on my Tumbleweed. I wonder send printing jobs from another computer sharing the same local network which runs Windows 10. Communication between Windows and Cups over LAN has been verified and it works. If I print a test page from Cups web-page accessing it by the Windows pc browser, it works. The problem is that I cannot print nothing using the Windows spool despite the network shared printer being available and apparently all details being accessible from Windows. I've not found so far much documentation in regard so I'm asking if I'm ready to go with just CUPS or may be I need to install SAMBA as well in order Windows being able to print via CUPS? Any brief and 100% working HOW-TO is appreciated. Thanks Regards, -- To unsubscribe, e-mail: opensuse-support+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-support+owner(a)opensuse.org

4 8

[opensuse-support] nvidia drivers hasta la vista?
by ksusup 08 Oct '20

08 Oct '20

i just noticed that the nvidia drivers are mysteriously 'no longr installed' on my Asus g73 laptop tumbleweed, BUT that google-earth seems to work just fine without them. Does this mean that i can delete the nvidia repo please? -- "Peace is better than war; in peace the sons bury their fathers, in wars the fathers their sons". Croesus -- To unsubscribe, e-mail: opensuse-support+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-support+owner(a)opensuse.org

2 1

[opensuse-support][TW?] global X configuration "script" in /etc/X11/xinit/xinitrc.d/ is ignored
by Felix Miata 08 Oct '20

08 Oct '20

The "script": xrandr --dpi 108 --output DP-1 --primary --mode 2560x1440 --output HDMI-1 --mode 2560x1080 --above DP-1 --output DVI-D-1 --mode 1920x1200 --right-of DP-1 --output VGA-1 --mode 1680x1050 --above DVI-D-1 IceWM layout is as expected in TW (via SDDM): 4480 x 2520 2560x1080 upper left 2560x1440 lower left 1680x1050 upper right 1920x1200 lower right http://fm.no-ip.com/Tmp/Linux/Xorg/Multi/ara88-4screens-stwIceWM.txt So is TDE in 15.1 (via TDM): 4480 x 2520 2560x1080 upper left 2560x1440 lower left 1680x1050 upper right 1920x1200 lower right http://fm.no-ip.com/Tmp/Linux/Xorg/Multi/ara88-4screens-s151TDE.txt Plasma in TW does not (via SDDM): 8720 x 1440, all 4 displays side by side by side by side http://fm.no-ip.com/Tmp/Linux/Xorg/Multi/ara88-4screens-stwKDE.txt http://fm.no-ip.com/Tmp/Linux/Xorg/Multi/jrnl-ara88-4screens-stwKDE.txt http://fm.no-ip.com/Tmp/Linux/Xorg/Multi/xorg.0.log-ara88-4screens-stwKDE.t… The script does work if I run it after starting a Plasma session. I don't have any multi-head PCs with KDE & openSUSE except with TW. IOW, all my Leaps are running TDE or KDE3, with TDM or KDM3, so I can't tell if Plasma in openSUSE ever started up respecting the xrandr script. In Fedora 32 I have Plasma on a 3 output PC, but it's using LightDM rather than SDDM. I have one 15.2 with Plasma on a single head PC. The script is respected for the purpose of specifying DPI. If there's a bug here, whose is it? KDE? openSUSE? SDDM? TW but not Leap? Xorg? FWIW, in Debians I have the script in /etc/X11/Xsession.d/, but don't have KDE on any of them anyway (TDE only, working as expected). Suggestions? (not to include user-specific configuration in any form or manner) More info: http://fm.no-ip.com/Tmp/Linux/Xorg/Multi/ -- Evolution as taught in public schools, like religion, is based on faith, not on science. Team OS/2 ** Reg. Linux User #211409 ** a11y rocks! Felix Miata *** http://fm.no-ip.com/ -- To unsubscribe, e-mail: opensuse-support+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-support+owner(a)opensuse.org

1 0

[opensuse-support] Can't use https://meet.opensuse.org/
by Carlos E. R. 08 Oct '20

08 Oct '20

Hi, I need to use https://meet.opensuse.org/ and it just doesn't work for me. Using Leap 15.1 on three computers. First laptop. XFCE would not manage the BT earphones, so I switched to Gnome after a reboot. With it, sound on the earphones was just noise, but the microphone appeared to work (unsure without loopback test). But when opening the meeting both cores went to 100% CPU, so sound had "interrupts". Camera worked in the meeting configuration, but refused on the meeting, because "camera does not support required video resolution". I tried all the resolutions the meet system offered me. Same problem with FF and Chrome. Similar problem on my second laptop, except I have no BT, but I have an old but working earphone plus mic set (two jacks). CPU load was about 90%, thus sound worked. Same problem with camera. On the desktop machine there is no cpu overload, so I can hear properly, but the integrated camera has never worked since I bought it, and the integrated microphone appears not to work. I tested on https://test.webrtc.org Laptop 2. Microphone passes. Camera passes at 320*240, gets stuck at 640*480. Prints a small progress green line that stops at the end where it should say "ok". Doesn't do any more testing. Cpu load is 8 by pulse audio. Camera led is now off. Laptop-1 on wifi. Camera fails at 1280*720, network warning at ipv6, connectivity warning because "reflexive connectivity" video bandwidth throughput fails. Laptop-1 on eth. gets stuck when testing camera at 640*480, same as laptop-2 Restarting the test passes that point: Camera fails at 1280*720, network warning at ipv6, connectivity warning because "reflexive connectivity" video bandwidth throughput fails. No improvement. Video throughput says it failed because "frame rate mean is 0, can not test bandwidth without a working camera". Retesting laptop-2 Laptop 2. Microphone passes. Camera fails at 1280*720. Network warning, no ipv6. Video throughput fails, same problem as laptop-1 What can I do? -- Cheers / Saludos, Carlos E. R. (from 15.1 x86_64 at Telcontar)

3 6

[opensuse-support] can't find scanner
by Doug McGarrett 05 Oct '20

05 Oct '20

After the scanner in the epson all-mode was working fine, today I get the message, "Can't find scanner" and same after reboot. How can I troubleshoot this? Or just brute-force it? --doug -- To unsubscribe, e-mail: opensuse-support+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-support+owner(a)opensuse.org

3 10

[opensuse-support] no netflix with firefox on tumbleweed
by ksusup 04 Oct '20

04 Oct '20

Netflix works fine on my asus g73 laptop under Leap-15.2. The problem with Leap here is the 60" TV screen not mirroring the laptop correctly, all I can get is an ovescaled but small part of the laptop screen. Firefox-78.2 in use. With Tumbleweed the TV screen mirrors just fine out of the box but netflix gives the error code F7355 (DRM enabled in all cases). Loading the flick into Chromium solves the problem but I want to use FF or Opera both of which have the problem. Downgrading FF to 78.3 from 80.0-1.2 doesn't fix the problem. What else can I do? -- To unsubscribe, e-mail: opensuse-support+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-support+owner(a)opensuse.org

2 2