- openSUSE Support

Re: printing problems
by Daniel Morris 05 Jan '21

05 Jan '21

[sorry my mistake not copying the support list the first time] On Mon, Jan 04, 2021 at 08:35:39PM -0500, Doug McGarrett wrote: > > > On 1/4/21 5:35 PM, Daniel Morris wrote: > > Hi Doug, > > > > On Mon, Jan 04, 2021 at 04:00:42PM -0500, Doug McGarrett wrote: > > > Have two printers--HP and Epson--which were both working. Was looking at > > > a pdf in Okular, and tried to print it using the little printer icon in the > > > panel. It > > > showed four items in the print queue, which I can't account for, but I think > > > I got rid of them with the options available. Would not print. Tried the > > > other > > > printer, same routine, won't print. Now tried printing with each printer > > > from > > > a text in Kate. Neither printer will print. No error message. The Epson has > > > a > > > scanner function, and that still works. > > Maybe there are jobs stuck in the queues or something's gone wobbly with > > a filter. > > > > $ lpq -a > > > > will show all the print queues and maybe give you a hint > > > > and as it sounds like you've already found you can cancel individual > > and bulk jobs using the 'cancel' command > > > > But the easiest way is usually to connect to your own machine and look > > at what CUPS thinks is going on. Just launch a browser and connect to > > port 631 on your machine by entering this into the address bar: > > > > localhost:631 > > > > You might be prompted to login with the root password to that page. > > > > Usually you can navigate at the top of the page to "Printers" and "Jobs" > > to work out what's going on. > > > > I guess you'll probably have two print queues setup, one for the Epson & > > one for the HP. In the "Printers" tab see what the "Status" field says. > > > > If you click on the name of the print queue, you'll have two drop-downs > > for "Maintenance" & "Administration". Sometimes you might just need to > > "Resume" a printer (under Maintenance) if it had a temporary fault, such > > as out of paper, jammed or a door open etc. I think the default config > > waits for an admin to intervene if there's a fault - logical in a > > big/corporate setup but quite irritating when the printer is sat at the > > other end of your desk and you can see it ran out of paper and now have > > to launch a browser and login and tell CUPS to tell the printer to > > resume. > > > > Resist making changes under Administration at this stage, if both > > printers worked before then it's a bit odd that the two have stopped > > together, but not unknown (typically file permissions or broken > > filters). If your printers are hooked up via ethernet and your > > network/router has re-assigned their addresses (DHCP) then that can > > cause this kind of breakage. As can forgetting that you (or someone > > else) unplugged/re-routed the USB/Ethernet cables when tidying the desk > > before Christmas. > > > > Daniel > > > In cups, "Resume Printer" Unable to do maintenance command: Forbidden > Cups -Show active jobs--none listed. So was the status of the Printer "paused" to begin with? That error message seems to suggest you haven't logged into CUPS (via the broswer) with sufficient/root privileges to allow a resume. If not paused, what happens if you try to Pause the printer from the Maintenance dropdown? Do the Driver and Connection details under the Printer tab look sensible? eg, in the browser (localhost:631) I click Printers from heading, then click on the Queue Name Photosmart_5520 to see the following (below the Maintenance & Administration dropdown buttons): Description: HP Photosmart 5520 Location: corner of lounge Driver: HP Photosmart 5520 Series hpijs, 3.13.10 (color, 2-sided printing) Connection: hp:/net/Photosmart_5520_series?ip=192.168.1.65 Defaults: job-sheets=none, none media=iso_a4_210x297mm sides=one-sided > > The jobs that wouldn't print are shown as cancelled. One of them says > "Filter failed" but the others don't. (Just looking at one printer at that > point.) > > Seems to be the same for all four listings. ( Each printer is, and has been, > listed twice with slightly different settings--both used to work, at either > setting.) > > I got the printers to work from a different computer, so it's OK on > that end, apparently. That tells me that the router has not reassigned > DHCP. (Both printers have fixed addresses.) > > I'm kind of snowed at this point. --doug > Don't despair, now you can dig in. Do you have enough disk space where the filter and print queue will be spooling data: $ df -h Check your journal for cups related messages: $ journalctl -u cups There's also the classic error_log, access_log & page_log files under /var/log/cups: $ less /var/log/cups/error_log (or viewable from the browser under Administration->Server section) Using those logs can you narrow down when the printing stopped working? Has a system change or update caused the breakage? Using rpm to see which packages have been installed or updated might be helpful: $ rpm -qa --last |less Hopefully you can work out what's gone wrong and then know what to fix. Daniel

4 4

tumbleeweed 20201218 install - Intel Wi-Fi 6 AX 200 not detected
by Matthew 05 Jan '21

05 Jan '21

Hello, I'm trying a bare metal install of Tumbleweed (snapshot 20021218...but I've had the same result with several predecessor snapshots) on an HP Envy x360 (15z-ds100) with the "Intel Wi-FI 6 AX 200 (2x2) and Bluetooth 5 combo." When I get to the "Network Settings" page, no hardware is detected. I could install without networking and tackle the issue later, but thought I'd seek advice here first (maybe there's a fix that will help others in the future). My troubleshooting thus far (which may or may not be helpful) consists of switching over to a terminal (ctrl+alt F1), removing the iwlwifi module ("rmmod iwlwifi") and adding it back via "modprobe iwlwifi". That last command produces the following output: [ 1544.250127] Intel(R) Wireless WiFi driver for Linux [ 1544.259285] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-cc-a0-56.ucode failed with error -2 [ 1544.259308] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-cc-a0-55.ucode failed with error -2 [ 1544.259325] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-cc-a0-54.ucode failed with error -2 [ 1544.259342] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-cc-a0-53.ucode failed with error -2 [ 1544.259357] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-cc-a0-52.ucode failed with error -2 [ 1544.259374] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-cc-a0-51.ucode failed with error -2 [ 1544.259390] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-cc-a0-50.ucode failed with error -2 [ 1544.259406] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-cc-a0-49.ucode failed with error -2 [ 1544.259422] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-cc-a0-48.ucode failed with error -2 [ 1544.259439] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-cc-a0-47.ucode failed with error -2 [ 1544.259456] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-cc-a0-46.ucode failed with error -2 [ 1544.259472] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-cc-a0-45.ucode failed with error -2 [ 1544.259489] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-cc-a0-44.ucode failed with error -2 [ 1544.259510] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-cc-a0-43.ucode failed with error -2 [ 1544.259528] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-cc-a0-42.ucode failed with error -2 [ 1544.259545] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-cc-a0-41.ucode failed with error -2 [ 1544.259561] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-cc-a0-40.ucode failed with error -2 [ 1544.259574] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-cc-a0-39.ucode failed with error -2 [ 1544.259575] iwlwifi 0000:02:00.0: no suitable firmware found! [ 1544.259576] iwlwifi 0000:02:00.0: minimum version required: iwlwifi-cc-a0-39 [ 1544.259577] iwlwifi 0000:02:00.0: maximum version supported: iwlwifi-cc-a0-56 [ 1544.259578] iwlwifi 0000:02:00.0: check git://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git I've attempted to copy additional firmware into /lib/firmware, but that location is read-only (and not easily made read+write from my experiments). Should I just proceed with the install and address the network issue later (it may not even be there after install) or is there more troubleshooting you can suggest (or other options). FYI, I don't have a USB-to-RJ45 adapter at the moment, so I can't use wired networking. Thank you! Matthew

2 1

printing problems
by Doug McGarrett 04 Jan '21

04 Jan '21

Have two printers--HP and Epson--which were both working. Was looking at a pdf in Okular, and tried to print it using the little printer icon in the panel. It showed four items in the print queue, which I can't account for, but I think I got rid of them with the options available. Would not print. Tried the other printer, same routine, won't print. Now tried printing with each printer from a text in Kate. Neither printer will print. No error message. The Epson has a scanner function, and that still works. ( I don't know why there is a printer icon in the panel, if it's not going to print.) Here is an nmap report on the LaserJet: doug@linux1:~> nmap --reason 192.168.1.29 Starting Nmap 7.80 ( https://nmap.org ) at 2021-01-04 15:55 EST Nmap scan report for 192.168.1.29 Host is up, received syn-ack (0.0066s latency). Not shown: 992 closed ports Reason: 992 conn-refused PORT STATE SERVICE REASON 21/tcp open ftp syn-ack 23/tcp open telnet syn-ack 80/tcp open http syn-ack 443/tcp open https syn-ack 515/tcp open printer syn-ack 631/tcp open ipp syn-ack 8080/tcp open http-proxy syn-ack 9100/tcp open jetdirect syn-ack A similar output for the Epson, but I already know that's on line as a scanner. I don't know how to troubleshoot or fix this. Please advise. --Doug

2 1

sshd coredumps on Tw
by Patrick Shanahan 03 Jan '21

03 Jan '21

I get a considerable number of sshd coredumps per day on Tumbleweed, currently 20210101. there is no system crash or other notice and does not seem to affect other ssh connections (I maintain quite a few to share filesystems). 12:13 crash: ~ # coredumpctl info 24778 -o sshd.coredump.txt PID: 24778 (sshd) UID: 1000 (paka) GID: 100 (users) Signal: 11 (SEGV) Timestamp: Sun 2021-01-03 10:49:57 EST (1h 23min ago) Command Line: sshd: paka@notty Executable: /usr/sbin/sshd Control Group: /user.slice/user-1000.slice/session-27.scope Unit: session-27.scope Slice: user-1000.slice Session: 27 Owner UID: 1000 (paka) Boot ID: 6daaababe19d42638b365590e4f26aee Machine ID: 3384cbc37a574dcc99445aa25cd2db04 Hostname: crash Storage: /var/lib/systemd/coredump/core.sshd.1000.6daaababe19d42638b365590e4f26aee.24778.1609688997000000.zst Message: Process 24778 (sshd) of user 1000 dumped core. Stack trace of thread 24778: #0 0x000055d628693563 cipher_free (sshd + 0x4e563) #1 0x000055d628695b67 ssh_packet_close_internal (sshd + 0x50b67) #2 0x000055d628655cbf main (sshd + 0x10cbf) #3 0x00007f2cae063152 __libc_start_main (libc.so.6 + 0x28152) #4 0x000055d62865624e _start (sshd + 0x1124e) is this a known issue? I see nothing similar lately on bugzilla how would I trouble-shoot? should I open a bug report? tks -- (paka)Patrick Shanahan Plainfield, Indiana, USA @ptilopteri http://en.opensuse.org openSUSE Community Member facebook/ptilopteri Photos: http://wahoo.no-ip.org/piwigo paka @ IRCnet freenode

4 7

About trim support on LUKS encrypted devices.
by Carlos E. R. 28 Dec '20

28 Dec '20

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 I have, on one Leap 15.1 machine: /etc/crypttab: cr_home /dev/disk/by-id/ata-...-part5 none timeout=300,discard /etc/fstab: /dev/mapper/cr_home /home xfs lazytime,exec,nofail 1 2 Isengard:~ # cat /proc/cmdline BOOT_IMAGE=/boot/vmlinuz-4.12.14-lp151.28.67-default root=UUID=0d457df1-... showopts resume=/dev/disk/by-label/Swap splash=verbose Isengard:~ # Isengard:~ # mount | grep /home /dev/mapper/cr_home on /home type xfs (rw,relatime,lazytime,attr2,inode64,noquota) Isengard:~ # And apparently, trim is working: Isengard:~ # service fstrim status ● fstrim.service - Discard unused blocks on filesystems from /etc/fstab Loaded: loaded (/usr/lib/systemd/system/fstrim.service; static; vendor preset: disabled) Active: inactive (dead) since Mon 2020-12-28 00:01:26 CET; 12h ago Docs: man:fstrim(8) Process: 24826 ExecStart=/usr/sbin/fstrim -Av (code=exited, status=0/SUCCESS) Main PID: 24826 (code=exited, status=0/SUCCESS) Dec 28 00:00:03 Isengard systemd[1]: Starting Discard unused blocks on filesystems from /etc/fstab... Dec 28 00:01:26 Isengard fstrim[24826]: /home: 62.6 GiB (67245150208 bytes) trimmed on /dev/mapper/cr_home <======= Dec 28 00:01:26 Isengard fstrim[24826]: /: 1.7 GiB (1831469056 bytes) trimmed on /dev/sda4 Dec 28 00:01:26 Isengard systemd[1]: Started Discard unused blocks on filesystems from /etc/fstab. Isengard:~ # So I understand from that that trim is working, yet I'm not using "allow_discards" as a kernel option. On another machine, running Leap 15.2 (upgraded from 15.1 on 2020-11-08), it is not working with similar settings. I have: /etc/crypttab: cr_crypta /dev/disk/by-uuid/f9ef602f-... none noauto,discard /etc/fstab: /dev/mapper/cr_crypta /data/cripta xfs defaults,lazytime 1 2 minas-tirith:~ # cat /proc/cmdline BOOT_IMAGE=/vmlinuz-5.3.18-lp152.47-default root=UUID=7d8f7fc8-df18-474b-be96-e43862cf3289 resume=/dev/disk/by-label/Swap splash=verbose console=tty1 loglevel=3 showopts rd.convertfs minas-tirith:~ # minas-tirith:~ # mount | grep data /dev/mapper/cr_crypta on /data/cripta type xfs (rw,relatime,lazytime,attr2,inode64,logbufs=8,logbsize=32k,noquota) minas-tirith:~ # service fstrim status ● fstrim.service - Discard unused blocks on filesystems from /etc/fstab Loaded: loaded (/usr/lib/systemd/system/fstrim.service; static; vendor preset: disabled) Active: inactive (dead) since Mon 2020-12-28 12:48:46 CET; 11min ago Docs: man:fstrim(8) Process: 13106 ExecStart=/usr/sbin/fstrim -Av (code=exited, status=0/SUCCESS) Main PID: 13106 (code=exited, status=0/SUCCESS) minas-tirith:~ # Notice that in this machine the journal does not have information. 15.1 had the same problem, yet the journal is persistent. Syslog does have the entries: minas-tirith:~ # grep -i trim /var/log/messages <3.6> 2020-11-09 00:01:35 minas-tirith fstrim 20497 - - /other: 1.6 GiB (1716981760 bytes) trimmed on /dev/sda9 <3.6> 2020-11-09 00:01:35 minas-tirith fstrim 20497 - - /: 5.1 GiB (5511180288 bytes) trimmed on /dev/sda7 <3.6> 2020-11-09 00:01:35 minas-tirith fstrim 20497 - - /boot: 113.7 MiB (119165952 bytes) trimmed on /dev/sda6 <3.6> 2020-12-01 09:09:20 minas-tirith btrfs-trim.sh 11836 - - Path / is not btrfs, skipping <3.6> 2020-12-21 21:18:43 minas-tirith fstrim 5069 - - /other: 0 B (0 bytes) trimmed on /dev/sda9 <3.6> 2020-12-21 21:18:43 minas-tirith fstrim 5069 - - /: 1.9 GiB (1998217216 bytes) trimmed on /dev/sda7 <3.6> 2020-12-21 21:18:43 minas-tirith fstrim 5069 - - /boot: 9.4 MiB (9889792 bytes) trimmed on /dev/sda6 <3.6> 2020-12-28 12:48:46 minas-tirith fstrim 13106 - - /other: 0 B (0 bytes) trimmed on /dev/sda9 <3.6> 2020-12-28 12:48:46 minas-tirith fstrim 13106 - - /: 781.9 MiB (819888128 bytes) trimmed on /dev/sda7 <3.6> 2020-12-28 12:48:46 minas-tirith fstrim 13106 - - /boot: 4.9 MiB (5072896 bytes) trimmed on /dev/sda6 minas-tirith:~ # Previous 15.1 messages: <3.6> 2020-09-15 18:30:18 minas-tirith fstrim 14184 - - /other: 1.6 GiB (1716981760 bytes) trimmed on /dev/sda9 <3.6> 2020-09-15 18:30:18 minas-tirith fstrim 14184 - - /: 6 GiB (6432956416 bytes) trimmed on /dev/sda7 <3.6> 2020-09-15 18:30:18 minas-tirith fstrim 14184 - - /boot: 123.2 MiB (129189888 bytes) trimmed on /dev/sda6 But observe that /data/cripta does not appear, it is not trimmed. Why not? minas-tirith:~ # fstrim -v /data/cripta fstrim: /data/cripta: the discard operation is not supported minas-tirith:~ # mount | grep /data/cripta /dev/mapper/cr_crypta on /data/cripta type xfs (rw,relatime,lazytime,attr2,inode64,logbufs=8,logbsize=32k,noquota) minas-tirith:~ # On the other machine, it works: Isengard:~ # fstrim -v /home /home: 62.6 GiB (67245076480 bytes) trimmed Isengard:~ # mount | grep /home /dev/mapper/cr_home on /home type xfs (rw,relatime,lazytime,attr2,inode64,noquota) Isengard:~ # minas-tirith:~ # dmsetup info /dev/mapper/cr_crypta Name: cr_crypta State: ACTIVE Read Ahead: 256 Tables present: LIVE Open count: 1 Event number: 0 Major, minor: 254, 0 Number of targets: 1 UUID: CRYPT-LUKS1-...-cr_crypta minas-tirith:~ # Isengard:~ # dmsetup info /dev/mapper/cr_home Name: cr_home State: ACTIVE Read Ahead: 1024 Tables present: LIVE Open count: 1 Event number: 0 Major, minor: 254, 0 Number of targets: 1 UUID: CRYPT-LUKS1-...-cr_home Isengard:~ # I have another laptop running 15.1 where it works: /etc/crypttab: cr_sda8 UUID=1edf494d-d697-40b2-ba00-c7da0a1d5fbe none timeout=300,discard /etc/fstab: /dev/mapper/cr_sda8 /home xfs lazytime 0 1 Legolas:~ # cat /proc/cmdline BOOT_IMAGE=/boot/vmlinuz-4.12.14-lp151.28.67-default root=UUID=8c1f1030-... resume=/dev/disk/by-label/Swap splash=verbose showopts Legolas:~ # Legolas:~ # mount | grep /home /dev/mapper/cr_sda8 on /home type xfs (rw,relatime,lazytime,attr2,inode64,noquota) Legolas:~ # Legolas:~ # service fstrim status ● fstrim.service - Discard unused blocks on filesystems from /etc/fstab Loaded: loaded (/usr/lib/systemd/system/fstrim.service; static; vendor preset: disabled) Active: inactive (dead) since Mon 2020-12-28 13:36:52 CET; 3min 38s ago Docs: man:fstrim(8) Process: 10462 ExecStart=/usr/sbin/fstrim -Av (code=exited, status=0/SUCCESS) Main PID: 10462 (code=exited, status=0/SUCCESS) Dec 28 13:35:33 Legolas.valinor systemd[1]: Starting Discard unused blocks on filesystems from /etc/fstab... Dec 28 13:36:52 Legolas.valinor fstrim[10462]: /home: 69.2 GiB (74332495872 bytes) trimmed on /dev/mapper/cr_sda8 <===== Dec 28 13:36:52 Legolas.valinor fstrim[10462]: /: 2.3 GiB (2484498432 bytes) trimmed on /dev/sda11 Dec 28 13:36:52 Legolas.valinor systemd[1]: Started Discard unused blocks on filesystems from /etc/fstab. Legolas:~ # Information links: <https://superuser.com/questions/1546128/ssd-trim-on-archlinux/1546136#15461…> SSD Trim on Archlinux <https://wiki.archlinux.org/index.php/Solid_state_drive#dm-crypt> <https://wiki.debian.org/SSDOptimization#Mounting_SSD_filesystems> <https://blog.christophersmart.com/2013/06/05/trim-on-lvm-on-luks-on-ssd/> TRIM on LVM on LUKS on SSD - -- Cheers Carlos E. R. (from 15.1 x86_64 at Telcontar) -----BEGIN PGP SIGNATURE----- iHoEARECADoWIQQZEb51mJKK1KpcU/W1MxgcbY1H1QUCX+nYrhwccm9iaW4ubGlz dGFzQHRlbGVmb25pY2EubmV0AAoJELUzGBxtjUfVgoQAnAue8M23DsVSZ8/Ahsvp T7e6D1nJAJ4pwLCXnBdHe/5VuVg+VGWHrtnO1Q== =d2w8 -----END PGP SIGNATURE-----

1 0

Tumbleweed Technical Concerns
by Kwame Boateng 27 Dec '20

27 Dec '20

Dear Opensuse Support, I'm concerned about some issues I've encountered while using Opensuse Tumbleweed. Is that something you can help me with? Kind regards, Kwame Boateng

2 1

cron job signatures script
by Marco Calistri 19 Dec '20

19 Dec '20

Hello, (Note: This is a generic Linux/Unix question not specifically related to Opensuse) Here a weird fact I face running a cron job from /etc/cron.hourly which it looks to trim away the final part of the text I aim to get. Below is the signature generated by script I add into the cron job: -- Marco Calistri Build: openSUSE Tumbleweed 20201216 Kernel: 5.9.14-1-default Desktop: Whereas here at the bottom the same script result if I run it from my console: -- Marco Calistri Build: openSUSE Tumbleweed 20201216 Kernel: 5.9.14-1-default Desktop: (Xfce 4.14) <----------------As you can see the script ran by the cron job it is missing this part. I suppose it could be caused by some variables settings which are different from my user environment and the ones used by the cron user. This is the script I use: #!/bin/sh echo "Marco Calistri" > /home/marco/.thunderbird/cy71896h.Marco/signatures/os-release.txt echo "Build: $(head -n 1 /etc/issue|awk -F'to' '{print $2}'|awk -F'-' '{print $1}')" >> /home/marco/.thunderbird/cy71896h.Marco/signatures/os-release.txt echo "Kernel: $(uname -r)" >> /home/marco/.thunderbird/cy71896h.Marco/signatures/os-release.txt echo "Desktop:$(xfce4-session --version |awk -F'xfce4-session' '{print $2}'|awk -F'2' '{print $2}')" >> /home/marco/.thunderbird/cy71896h.Marco/signatures/os-release.txt echo -ne "\n" >> /home/marco/.thunderbird/cy71896h.Marco/signatures/os-release.txt Thanks for any eventual suggestion you could provide to me. Regards, Marco

5 25

What exactly governs the Leap network stack when using network manager?
by Stakanov 19 Dec '20

19 Dec '20

I installed time ago unbound. After having done some adjustment (the dns resolution would be disturbed by settings of "automatic" in /etc/sysconfig "DNS Policy" (which i did set to "", and since then the "outages" I experience with unbound were gone) all was fine. Still rarely(!) it happens that something that seems "unrelated" to unbound "crashes". No error in unbound log, clean connection with the wlan, but no name resolution. A complete system restart does help. Only restarting unbound as service does not. So something that is in the middle between unbound and network does not function as it should (or at least I do not know how to restart it when it blocks). Normally I did sudo rcnetwork restart and that would restart the network. Now it appears that, although the network is restarted, the problem is not solved. Not even restarting unbound and rcnetwork. So what do I have to restart, some systemd thing? Last question: For what is /etc/sysconfig/"netconfig modules", with unbound, what should I insert there in yast, edit /etc/sysconfig as value for unbound? I guess: dns-resolver -dns-bind -dns-dnsmasq nis ntp-runtime (should do) but do I also "-" dns-resolver so all is done by unbound? or does the dns-resolver relies on unbound? What is the value to be set for unbound module: dns-unbound? (if anybody knows). Currently it is simply started by system services at startup, so maybe no extra value for it in etc/sysconfig is needed at all? Thanks in advance.

1 0

latest zypper refreshes repo list
by Peter Suetterlin 18 Dec '20

18 Dec '20

I just tried to look up some packages, as user. It failed because it wanted to refresh the repos, and of course didn't have write permission. Why this change? I've switched off autorefresh *on purpose*.

2 5

spam from lists.opensuse.org ?
by mauro 18 Dec '20

18 Dec '20

Hello, all my outbound emails to <listname>@lists.opensuse.org and certain inbound emails (the last ones are from Dan Čermák <dcermak(a)suse.com>, Gerald Pfeifer <gp(a)suse.com>, etc) end up flagged as spam by my mail provider (libero.it). On my side I've set no filter and blocked nobody. Libero claims responsible for the wrong flagging being the opensuse's servers. I attach their response to my complain. Please check it and let me know. Best Regards, Mauro

11 47