- openSUSE Support

[opensuse-support] vmware player no longer runs under Leap 15.0, library problems.
by Carlos E. R. 24 Jan '19

24 Jan '19

Telcontar:~ # vmplayer /usr/lib/vmware/bin/vmware-modconfig: Relink `/usr/lib64/libssh.so.4' with `/lib64/librt.so.1' for IFUNC symbol `clock_gettime' Telcontar:~ # I'm not sure of the version, as it doesn't run I can't ask. Could be version 12. The current version refuses to run. -- Cheers / Saludos, Carlos E. R. (from 15.0 x86_64 at Telcontar)

2 2

[opensuse-support] 2018-2019 openSUSE Board Election Candidates Update
by Fraser_Bell 24 Jan '19

24 Jan '19

IMPORTANT: DO NOT REPLY ON THIS LIST!!! IMPORTANT: DO NOT REPLY ON THIS LIST!!! Replies or comments should be made on the openSUSE Project Mailing List. ================ Only 11 days left to get your openSUSE Membership approved so you can vote in the openSUSE Board Elections. Here is the 4th installment in the "Meet Your openSUSE Board Elections Candidates" series at openSUSE News. Meet Sébastien Poher aka sogal: <url>https://news.opensuse.org/2019/01/24/2018-2019-opensuse-board-elections-mee…</url> You can find out more about the Elections here: <url>https://en.opensuse.org/openSUSE:Board_election</url> -- -Gerry Makaro openSUSE Board Elections Committee (election-officials **at** openSUSE.org) openSUSE Member openSUSE Global Moderator openSUSE Contributor YaST Contributor aka Fraser_Bell on the Forums, OBS, IRC, and mail at openSUSE.org Fraser-Bell on Github -- To unsubscribe, e-mail: opensuse-support+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-support+owner(a)opensuse.org

1 0

[opensuse-support] Only A Week and a Half left to Get Approved
by Fraser_Bell 23 Jan '19

23 Jan '19

IMPORTANT: DO NOT REPLY ON THIS LIST!!! IMPORTANT: DO NOT REPLY ON THIS LIST!!! Replies or comments should be made on the openSUSE Project Mailing List. ================ About 1.5 weeks left to get your openSUSE Membership approved so you can vote in the openSUSE Board Elections. Here is the 3rd installment in the "Meet Your openSUSE Board Elections Candidates" series at openSUSE News. Meet Incumbent Sarah Julia Kriesch: <url>https://news.opensuse.org/2019/01/23/2018-2019-opensuse-board-elections-mee…</url> <url>https://en.opensuse.org/openSUSE:Board_election</url> -- -Gerry Makaro openSUSE Board Elections Committee (election-officials **at** openSUSE.org) openSUSE Member openSUSE Global Moderator openSUSE Contributor YaST Contributor aka Fraser_Bell on the Forums, OBS, IRC, and mail at openSUSE.org Fraser-Bell on Github -- To unsubscribe, e-mail: opensuse-support+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-support+owner(a)opensuse.org

1 0

[opensuse-support] 2FA for crypted disk
by Wolfgang Rosenauer 22 Jan '19

22 Jan '19

Hi, as I understand from searching around it should be possible to do something like 2FA for crypto devices (LUKS). Or at least some challenge response. I've got a Yubikey and I found an Ubuntu howto. Because this is a bit of a risky implementation when my crypted home partition is not accessible anymore I'm a bit hesitant to experiment like I do typically. Therefore: Does anyone have a pointer to an HOWTO which works for openSUSE Tumbleweed? Thanks, Wolfgang -- To unsubscribe, e-mail: opensuse-support+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-support+owner(a)opensuse.org

5 8

[opensuse-support] Plasma Desktop Window Rules
by Bob Williams 22 Jan '19

22 Jan '19

openSUSE Leap 15.0 with KDE Plasma desktop. I have six virtual desktops and like certain programs to default to certain desktops. With KDE apps it's easy to define in System Settings > Window Management > Window Rules. I have one program that won't behave, however. Syncthing-GTK always opens on the current virtual desktop. Under the 'Window matching' tab, I currently have Window class (application): Exact Match syncthing-gtk Window role: Exact match mainwindow Window types: Normal Window Window title: Substring Match Syncthing-GTK Machine (hostname): Unimportant Under the Size & Position tab, I have Desktop Apply Initially 4:Desktop 4 I have tried endless different combinations (upper case, lower case, Exact Match, Substring Match, etc.), but the behaviour doesn't change. Any suggestions, please? Regards Bob -- Bob

4 6

[opensuse-support] Libre Office calc is always maximized, can not resize
by Carlos E. R. 22 Jan '19

22 Jan '19

Hi, Well, that's it, I can not resize the window. I right click on the panel entry, and "resize" is grayed out, and "unmaximize" does nothing. XFCE on 15.0 Default LO version. -- Cheers / Saludos, Carlos E. R. (from 15.0 x86_64 at Telcontar)

3 7

[opensuse-support] 2nd installment in "Meet Your openSUSE Board Elections Candidates" series
by Fraser_Bell 22 Jan '19

22 Jan '19

IMPORTANT: DO NOT REPLY ON THIS LIST!!! IMPORTANT: DO NOT REPLY ON THIS LIST!!! Replies or comments should be made on the openSUSE Project Mailing List. ================ Less than 2 weeks left until Ballots open. Here is article #2 in the "Meet Your Candidates" series of articles are being published on openSUSE News. <url>https://news.opensuse.org/2019/01/22/21530/</url> <url>https://en.opensuse.org/openSUSE:Board_election</url> -- -Gerry Makaro openSUSE Board Elections Committee (election-officials **at** openSUSE.org) openSUSE Member openSUSE Global Moderator openSUSE Contributor YaST Contributor aka Fraser_Bell on the Forums, OBS, IRC, and mail at openSUSE.org Fraser-Bell on Github -- To unsubscribe, e-mail: opensuse-support+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-support+owner(a)opensuse.org

1 0

[opensuse-support] Incorrect date handling in Libre Office calc
by Carlos E. R. 21 Jan '19

21 Jan '19

Also, I have a column of dates that were entered as text by the originator of the page (XLS format): 03/12/2018 03/12/2018 03/12/2018 Previously, I would simply do a search and replace on the range, replacing every '/' with '/', and they were converted instantly to dates. But now I get this instead: 03/12/18 03/12/18 03/12/18 03/12/18 03/12/18 04/12/18 04/12/18 07/12/18 07/12/18 10/12/18 10/12/18 13/12/2018 17/12/2018 17/12/2018 17/12/2018 18/12/2018 21/12/2018 21/12/2018 27/12/2018 28/12/2018 28/12/2018 31/12/2018 02/01/19 02/01/19 02/01/19 07/01/19 11/01/19 14/01/2019 16/01/2019 21/01/2019 I have to copy paste to another calc sheet, without format, meaning it takes the format of the destination cells; then some of the cells on edit show a preceding «'» meaning they are text. Then I can search and replace a second time. What is going on? This did not happen on 42.3. XFCE on 15.0 Default LO version -- Cheers / Saludos, Carlos E. R. (from 15.0 x86_64 at Telcontar)

2 3

[opensuse-support] I managed to crash gimp two times with the same photo save.
by Carlos E. R. 21 Jan '19

21 Jan '19

Hi, I scanned a document at 600dpi, then used "save/export clean" to jpg, and gimp crashed silently. The file was saved, though. I opened gimp again, scanned the same document without changing any setting, did "save/export clean" to another jpg file, and it crashed again. So I repeated a third time, but this time I started gimp from the terminal, to try see some message... but it did not crash. So I have no info... gimp-2.8.22-lp150.3.8.x86_64 -- Cheers / Saludos, Carlos E. R. (from 15.0 x86_64 at Telcontar)

1 0

[opensuse-support] Meet Your openSUSE Board Elections Candidates
by Fraser_Bell 21 Jan '19

21 Jan '19

IMPORTANT: DO NOT REPLY ON THIS LIST!!! IMPORTANT: DO NOT REPLY ON THIS LIST!!! Replies or comments should be made on the openSUSE Project Mailing List. ================ Two weeks left until Ballots open. A "Meet Your Candidates" series of articles are being published on openSUSE News. <url>https://news.opensuse.org/2019/01/21/2018-2019-opensuse-board-elections-mee…</url> <url>https://en.opensuse.org/openSUSE:Board_election</url> -- -Gerry Makaro openSUSE Board Elections Committee (election-officials **at** openSUSE.org) openSUSE Member openSUSE Global Moderator openSUSE Contributor YaST Contributor aka Fraser_Bell on the Forums, OBS, IRC, and mail at openSUSE.org Fraser-Bell on Github -- To unsubscribe, e-mail: opensuse-support+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-support+owner(a)opensuse.org

1 0