July 2018 - openSUSE Support - openSUSE Mailing Lists

[opensuse-support] Tumbleweed: repository signature verification started failing for private repo
by Robert Munteanu 06 Sep '18

06 Sep '18

Hi, For some time I've been using a private repo for various programs I've repackaged. It's a very simple setup based on createrepo. Now my TW machine refuses to use this repo, complaining that File 'repomd.xml' from repository 'lmn_private' is signed with an unknown key '.....' I've done the following checks: 1. Downloaded $REPO/repodata/repomd.xml 2. Downloaded $REPO/repodata/repomd.xml.asc 3. Ran gpg --verify repomd.xml.asc repomd.xml The output matches the key reported by zypper. 4. Verified that the key is known to rpm using rpm -qi gpg-pubkey-...-..... The body of the key known to RPM and the public key used to sign the packages are identical. The verification fails on my TW machine, with zypper-1.14.5-1.1.x86_64 libzypp-17.3.1-1.1.x86_64 But works on a Leap 42.3 server with zypper-1.13.32-5.12.1.x86_64 libzypp-16.15.6-5.12.1.x86_64 I'm not sure where to go next from here, what else can I try? Thanks, Robert -- http://robert.muntea.nu/ -- To unsubscribe, e-mail: opensuse-support+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-support+owner(a)opensuse.org

2 3

[opensuse-support] Lmms : free(): invalid pointer
by Daniele 01 Aug '18

01 Aug '18

Hi, after snapshot 726 Lmms does not start anymore: >lmms VST sync support disabled in your configuration free(): invalid pointer Aborted (core dumped) I was few snapshot behind so I don't know exactly since when.. It happens only to me ? Thanks, Daniele. -- To unsubscribe, e-mail: opensuse-support+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-support+owner(a)opensuse.org

1 1

[opensuse-support] LibreOffice : Date Column Format
by ellanios82 28 Jul '18

28 Jul '18

Dear Support , LibreOffice : Date Column Format since abt 10 days problem appears with Date Column Format. Date Column Format is set to Language English USA : MM/DD/YY For example today we have 07/28/18 in Date-Column : then if i use next cell below , in Date Column , and try to enter for August 03, 2018 , as 08/03/18 , then LO flips that to "03/08/18" nevertheless , when i check that cell-format it remains MM/DD/YY ..... something odd is happening :( thanks regards ..... -- To unsubscribe, e-mail: opensuse-support+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-support+owner(a)opensuse.org

3 7

[opensuse-support] dracut seems to hang.
by Constant Brouerius van Nidek 24 Jul '18

24 Jul '18

During my zypper dup in order to download the latest snapshot installing went well up to "(63/197) Installing: kernel-default-4.17.7-1.3.x86_64 ..100%>[-]." Than it stopped and has not moved an inch leaving me with an unfinished update. I was expecting the dracut information but that does not seem to come (one hour now) and I will keep it in this state untill I get some help and instructions on how to proceed. -- opensuse:tumbleweed:20180720 Qt: 5.11.1 KDE Frameworks: 5.47.0 - KDE Plasma: 5.13.3 - kwin 5.13.3 kmail2 5.8.3 - akonadiserver 5.8.3 - Kernel: 4.17.6-1-default -- To unsubscribe, e-mail: opensuse-support+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-support+owner(a)opensuse.org

4 5

[opensuse-support] can't create transaction lock
by Constant Brouerius van Nidek 21 Jul '18

21 Jul '18

Have since some days a problem with installing new programs or to do an update. The main information is : can't create transaction lock on /usr/lib/sysimage/rpm/.rpm.lock (Read-only file system) To solve this problem I found somebody promoting to rebuild the database. Resulting in: # rpm --rebuilddb error:# rpm --rebuilddb error: can't create transaction lock on /usr/lib/sysimage/rpm/.rpm.lock (Read- only file system) What is keeping me of repairing this problem. Deleting of the lock file is not possible even not with the force addition. Any ideas? -- opensuse:tumbleweed:20180714 Qt: 5.11.1 KDE Frameworks: 5.47.0 - KDE Plasma: 5.13.3 - kwin 5.13.3 kmail2 5.8.2 - akonadiserver 5.8.2 - Kernel: 4.17.5-1-default -- To unsubscribe, e-mail: opensuse-support+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-support+owner(a)opensuse.org

3 3

[opensuse-support] kscreenlocker with smartcard problem in Leap 15
by Lew Wolfgang 19 Jul '18

19 Jul '18

Hi Folks, The chump is stumped! I'm having problems with kscreenlocker when unlocking with a pin for a smartcard. I've already reported the bug on bugzilla and on KDE's bugtracking system, but no one has touched them for more than a week. Maybe I can find help here? First, the smartcards work with KDM for console logins, it's only kscreenlocker that fails. So the reader, pcscd, libcoolkey, and pam_pkcs11 all work. Everything also works on 42.x installs. Running pam_pkcs11 in debug mode shows kcheckpass calling pam_pkcs11, but fails to find a certificate. kcheckpass is apparently a component of kscreenlocker. So I looked to upgrade kscreenlocker from KDE:Frameworks5 (RPM) but hit a failed libQt5Core.so.5(Qt_5.11) dependency. I'd rather not mess with the guts of KDE at this time, are there any alternatives? Maybe use a different screen locker? Any suggestions? I contacted a developer listed on github for kcheckpass but was rebuffed for having the audacity to try to directly contact him. He hadn't touch it for years anyway... Regards, Lew -- To unsubscribe, e-mail: opensuse-support+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-support+owner(a)opensuse.org

1 0

[opensuse-support]TW20180714 no keyboard cursor keys using e in plain text grub-efi menu
by Felix Miata 18 Jul '18

18 Jul '18

Anyone else tried lately? I cannot do any editing of grub stanzas, only look or F10 or ESC. -- "Wisdom is supreme; therefore get wisdom. Whatever else you get, get wisdom." Proverbs 4:7 (New Living Translation) Team OS/2 ** Reg. Linux User #211409 ** a11y rocks! Felix Miata *** http://fm.no-ip.com/ -- To unsubscribe, e-mail: opensuse-support+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-support+owner(a)opensuse.org

3 3

[opensuse-support] TW20180712 Plasma crash before login completes painting
by Felix Miata 18 Jul '18

18 Jul '18

Happens on installations on two different Intel PCs, hosts ab250 and gx780. Data below is all from the older gx780. Nothing in .xsession-errors & no coredump. Xorg.0.log, dmesg tail and journal tail: http://fm.no-ip.com/Tmp/SUSE/Factory/xorg.0.log-TW20180712plasmacrash-gx780… http://fm.no-ip.com/Tmp/SUSE/Factory/plasmacrashLogs-gx780-TW20180712.txt Happens whether logging in from greeter (even in safe mode) or using startx. IceWM works normally. After deleting all KDE content from ~/.config/ no more crash, though all settings lost. I searched for and found no likely match on B.O.O. The journal for the crash indicates an apparent objection to my xrandr script in /etc/X11/xinit/xinitrd.d/, overriding the expected result. After the .config delete, the expected results from xrandr are ignored, unlike in IceWM, which fully obeys xrandr. Apparently this is at least two problems. Any ideas besides filing a bug or two or trying to remember all the desktop settings to try to restore, on each installation (I have several others yet to update since weeks or months)? --------------- # inxi -G Graphics: Card-1: Intel 4 Series Integrated Graphics driver: i915 v: kernel Display: server: X.Org 1.19.6 driver: modesetting unloaded: fbdev,intel,vesa resolution: 2560x1080~60Hz OpenGL: renderer: Mesa DRI Intel Q45/Q43 v: 2.1 Mesa 18.1.3 # lspci -nnk | grep -A3 VGA 00:02.0 VGA compatible controller [0300]: Intel Corporation 4 Series Chipset Integrated Graphics Controller [8086:2e12] (rev 03) Subsystem: Dell Device [1028:0420] Kernel driver in use: i915 Kernel modules: i915 # hwinfo --gfxcard 13: PCI 02.1: 0380 Display controller [Created at pci.378] Unique ID: ruGf.zhgSuVs59r0 SysFS ID: /devices/pci0000:00/0000:00:02.1 SysFS BusID: 0000:00:02.1 Hardware Class: graphics card Model: "Intel 4 Series Chipset Integrated Graphics Controller" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x2e13 "4 Series Chipset Integrated Graphics Controller" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x0420 Revision: 0x03 Memory Range: 0xf7b00000-0xf7bfffff (rw,non-prefetchable) Module Alias: "pci:v00008086d00002E13sv00001028sd00000420bc03sc80i00" Config Status: cfg=new, avail=yes, need=no, active=unknown 27: PCI 02.0: 0300 VGA compatible controller (VGA) [Created at pci.378] Unique ID: _Znp.SFJq_fZRtDB SysFS ID: /devices/pci0000:00/0000:00:02.0 SysFS BusID: 0000:00:02.0 Hardware Class: graphics card Model: "Intel 4 Series Chipset Integrated Graphics Controller" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x2e12 "4 Series Chipset Integrated Graphics Controller" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x0420 Revision: 0x03 Driver: "i915" Driver Modules: "i915" Memory Range: 0xf7c00000-0xf7ffffff (rw,non-prefetchable) Memory Range: 0xe0000000-0xefffffff (ro,non-prefetchable) I/O Ports: 0xecb0-0xecb7 (rw) Memory Range: 0x000c0000-0x000dffff (rw,non-prefetchable,disabled) IRQ: 16 (3353 events) I/O Ports: 0x3c0-0x3df (rw) Module Alias: "pci:v00008086d00002E12sv00001028sd00000420bc03sc00i00" Driver Info #0: Driver Status: i915 is active Driver Activation Cmd: "modprobe i915" Config Status: cfg=new, avail=yes, need=no, active=unknown Primary display adapter: #27 -- "Wisdom is supreme; therefore get wisdom. Whatever else you get, get wisdom." Proverbs 4:7 (New Living Translation) Team OS/2 ** Reg. Linux User #211409 ** a11y rocks! Felix Miata *** http://fm.no-ip.com/ -- To unsubscribe, e-mail: opensuse-support+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-support+owner(a)opensuse.org

1 1

[opensuse-support] new tumbleweed installation will only run plasma desktop
by George from the tribe 17 Jul '18

17 Jul '18

So, I decided to install tumbleweed on my laptop... very pleased in general... seems to run faster, I can use my mousepad for the first time in a year, adapted better to the generic amdgpu driver, so the graphics look more crisp and clean. Nice. The install was an upgrade from 42.3 via zypper dup after setting up all the tumbleweed repos and removing the 42.3 repos. But there are a few problems to get around. The first one is that I can only run the plasma desktop. I tried booting up and loading LXDE and XFCE, but when I login to either of those from the display manager, the screen goes black. I get a mouse cursor, but nothing else. When I hit ctrl-alt-double backspace to kill X, the actual LXDE or XFCE screen will pop up for about 30 seconds, and then it will go back to the display manager. A possibly related problem - /etc/sysconfig/displaymanager says this: # Here you can set the default Display manager (kdm/xdm/gdm/wdm/entrance/console). # all changes in this file require a restart of the displaymanager # DISPLAYMANAGER="sddm" However, the display manager doesn't actually look like it is sddm. It looks like it is gdm. I mean, it really is the gnome display manager and not sddm, unless sddm has been changed in tumbleweed to be exactly like gdm. I don't know if that is related to the problem of not being able to run any other DE besides plasma or not. Any ideas? Not sure what else to post here. Here is a link to my Xorg.0.log.old file after closing out trying to get into lxde and xfce and opening up plasma again: https://pastebin.com/raw/eRJPdNqH I would not know what to look for in that log file, so I just put the whole thing there. -- George Box: 42.3 | KDE Plasma 5.8 | AMD Phenom IIX4 | 64 | 32GB Laptop #1: TW | Plasma 5.13 | AMD FX 7TH GEN | 64 | 32GB Laptop #2: 42.3 | KDE Plasma 5.8 | Core i5 | 64 | 8GB -- To unsubscribe, e-mail: opensuse-support+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-support+owner(a)opensuse.org

3 3

[opensuse-support] boot priority on (Intel) iMac
by Felix Miata 13 Jul '18

13 Jul '18

I installed 15.0 on a previously virgin HD, partitioning in advance, and directing openSUSE which partitions to use for what. Good so far. Then I installed Snow Leopard. It wrested boot away from 15.0, so I installed rEFInd on the OS X system partition. That worked as advertised with no fuss necessary, allowing selection among OS X, 15.0, shutdown, reboot, and more that I don't remember. Then I ran YaST2 bootloader to see what would happen. Sure enough, it: 1-usurped control from rEFInd, and 2-omitted OS X from among the Grub2 menu choices. I used efibootmgr to reset the order: # efibootmgr BootCurrent: 0000 BootOrder: 0000,0001 Boot0000* opensuse Boot0001* rEFInd Goot Manager Boot0080* Mac OS X BootFFFF* # efibootmgr -o 0001,0000 BootCurrent: 0000 BootOrder: 0001,0000 Boot0000* opensuse Boot0001* rEFInd Goot Manager Boot0080* Mac OS X BootFFFF* but Grub still shows up instead of rEFInd on reboot. There is no BIOS to change boot order on Mactel. What can be done to prevent openSUSE from stealing boot control from rEFInd? -- "Wisdom is supreme; therefore get wisdom. Whatever else you get, get wisdom." Proverbs 4:7 (New Living Translation) Team OS/2 ** Reg. Linux User #211409 ** a11y rocks! Felix Miata *** http://fm.no-ip.com/ -- To unsubscribe, e-mail: opensuse-support+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-support+owner(a)opensuse.org

2 3

[opensuse-support] boot priority on (Intel) iMac
by Felix Miata 13 Jul '18

13 Jul '18

I installed 15.0 on a previously virgin HD, partitioning in advance, and directing openSUSE which partitions to use for what. Good so far. Then I installed Snow Leopard. It wrested boot away from 15.0, so I installed rEFInd on the OS X system partition. That worked as advertised with no fuss necessary, allowing selection among OS X, 15.0, shutdown, reboot, and more that I don't remember. Then I ran YaST2 bootloader to see what would happen. Sure enough, it: 1-usurped control from rEFInd, and 2-omitted OS X from among the Grub2 menu choices. There is no BIOS to change boot order on Mactel. What can be done to prevent openSUSE from stealing boot control from rEFInd? -- "Wisdom is supreme; therefore get wisdom. Whatever else you get, get wisdom." Proverbs 4:7 (New Living Translation) Team OS/2 ** Reg. Linux User #211409 ** a11y rocks! Felix Miata *** http://fm.no-ip.com/ -- To unsubscribe, e-mail: opensuse-support+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-support+owner(a)opensuse.org

1 0

[opensuse-support] amd graphics card on laptop and slowness
by George from the tribe 12 Jul '18

12 Jul '18

So I have been using this Dell Inspiron 15 5576 (laptop #1 below) and have not been generally happy with its performance. Sluggish, sometimes freezes, can't suspend to ram, and a few other minor irritations. Should run really fast with the amount of memory it has. I found a thread indicating maybe a problem with the graphics card? So I looked up my specs on Dell, and this is supposedly the graphics card I have: AMD FX 9830P Quad-Core Processor with Radeon R7 Graphics However, here is what the hardware info detects: # hwinfo --gfxcard 09: PCI 01.0: 0300 VGA compatible controller (VGA) [Created at pci.378] Unique ID: vSkL.gwUVE8uFOP6 SysFS ID: /devices/pci0000:00/0000:00:01.0 SysFS BusID: 0000:00:01.0 Hardware Class: graphics card Model: "ATI Carrizo" Vendor: pci 0x1002 "ATI Technologies Inc" Device: pci 0x9874 "Carrizo" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x07e2 Revision: 0xcc Driver: "amdgpu" Driver Modules: "drm" Memory Range: 0xd0000000-0xdfffffff (ro,non-prefetchable) Memory Range: 0xf0800000-0xf0ffffff (ro,non-prefetchable) I/O Ports: 0xf000-0xf0ff (rw) Memory Range: 0xfea00000-0xfea3ffff (rw,non-prefetchable) Memory Range: 0xfea40000-0xfea5ffff (ro,non-prefetchable,disabled) IRQ: 228 (276509 events) Module Alias: "pci:v00001002d00009874sv00001028sd000007E2bc03sc00i00" Driver Info #0: Driver Status: amdgpu is active Driver Activation Cmd: "modprobe amdgpu" Config Status: cfg=no, avail=yes, need=no, active=unknown 32: PCI 300.0: 0380 Display controller [Created at pci.378] Unique ID: svHJ.+ug88O0PpPA Parent ID: w+J7.XZwpGIabNM5 SysFS ID: /devices/pci0000:00/0000:00:03.1/0000:03:00.0 SysFS BusID: 0000:03:00.0 Hardware Class: graphics card Model: "ATI Baffin [Radeon RX 460]" Vendor: pci 0x1002 "ATI Technologies Inc" Device: pci 0x67ef "Baffin [Radeon RX 460]" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x07e2 Revision: 0xff Driver: "amdgpu" Driver Modules: "drm" Memory Range: 0xe0000000-0xefffffff (ro,non-prefetchable) Memory Range: 0xf0000000-0xf01fffff (ro,non-prefetchable) I/O Ports: 0xd000-0xdfff (rw) Memory Range: 0xfe800000-0xfe83ffff (rw,non-prefetchable) Memory Range: 0xfe840000-0xfe85ffff (ro,non-prefetchable) IRQ: 230 (55 events) Module Alias: "pci:v00001002d000067EFsv00001028sd000007E2bc03sc80i00" Driver Info #0: Driver Status: amdgpu is active Driver Activation Cmd: "modprobe amdgpu" Config Status: cfg=no, avail=yes, need=no, active=unknown Attached to: #15 (PCI bridge) Primary display adapter: #9 So it detects 2 controllers, is calling one of them an "ATI Carrizo" and the other one an "ATI Baffin [Radeon RX 460]". The Dell specs say it is Radeon R7 but opensuse is saying Radeon RX 460. Is this right? And also, is the amdgpu driver sufficient? I found this thread in the forums https://forums.opensuse.org/showthread.php/528306-amdgpu-pro-driver-issue that seems to indicate I need to download the new amdgpu-pro driver. So I downloaded the driver from here https://support.amd.com/en-us/kb-articles/Pages/AMDGPU-PRO-Driver-for-Linux… but I haven't installed it yet. Am I on the right path here? -- George Box: 42.3 | KDE Plasma 5.8 | AMD Phenom IIX4 | 64 | 32GB Laptop #1: 42.3 | KDE Plasma 5.8 | AMD FX 7TH GEN | 64 | 32GB Laptop #2: 42.3 | KDE Plasma 5.8 | Core i5 | 64 | 8GB -- To unsubscribe, e-mail: opensuse-support+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-support+owner(a)opensuse.org

2 2

[opensuse-support] Just how crippled is 15.0 DVD rescue boot known to be?
by Felix Miata 12 Jul '18

12 Jul '18

I selected rescue from DVD boot to try to fix a corrupted EFI configuration after installing OS X added another EFI system partition, which along with the rest of installed OS X partitions I deleted, then recreated to my specifications. I expected a GUI, but didn't get one. I used efibootmgr to reaffirm that openSUSE is first in list, but Mac BIOS apparently ignores it. I tried to fix it with YaST2 from another rescue boot, but apparently YaST2 isn't on the 15.0 DVD. So I rebooted again but selected boot from HD. That fails with "error: no such device: /dev/boot/fallback.efi." So I rebooted again, this time typing in a complete Grub stanza from scratch, but it produced "error: can't find command 'load_video'; error: can't find command 'linux'; can't find command 'initrd'". I tried again but with linuxefi and initrdefi. After stumbling over can't find load_video again it proceeded to boot. What's the secret on a UEFI system to "repair" the bootloader or boot the installed system, boot a 42.3 DVD? |ID |ux|Dr|Type, description|Format |Related |VolumeLabel|OS2-LVM/BM / GPT / Crypt / additional in| Size MiB | +--</dev/sda MBR disk 1>--------+--------+-----------<ST1000DM003-1SB1>-----------------------+-----------+ |01 | 1| |Prim ee GPT-guard|Prot-MBR|GPT/EFI | | 74706daf | 953869.7| |02 | 1| |Windows BasicData|FAT16 |mkfs.fat|ST10-ESP |sda1 EFI System (ESP) | 368.0| |03 | 2| |Mac OS X HFS+ |unknown |macOS | |sda2 Mac OS X HFS+ system | 36750.0| |04 | 3| |Mac OS X HFS+ |unknown |macOS | |sda3 Mac OS X HFS+ data | 440000.0| |05 | 4| |Linux Swap |SWAP |LinuxV1 |SWAPSPACE2 |sda4 Linux Swap | 4224.0| |06 | 5| |Linux Data |EXT4 |Linux |st10suselea|sda5 openSUSE Leap | 32526.0| |07 | 6| |Linux Data |XFS |Linux | |sda6 Linux /home | 440000.0| |08 | | |Fsp + GPT pta/hdr|-- -- --|-- -- --|- - - - - -|Size 0x58f sectors | 0.695| # parted -l Model: ATA ST1000DM003-1SB1 (scsi) Disk /dev/sda: 1000GB Sector size (logical/physical): 512B/4096B Partition Table: gpt Disk Flags: Number Start End Size File system Name Flags 1 1049kB 387MB 386MB fat32 sda1 EFI System (ESP) boot, hidden, esp 2 387MB 38.9GB 38.5GB sda2 Mac OS X HFS+ system 3 38.9GB 500GB 461GB sda3 Mac OS X HFS+ data 4 500GB 505GB 4429MB linux-swap(v1) sda4 Linux Swap swap 5 505GB 539GB 34.1GB ext4 sda5 openSUSE Leap 6 539GB 1000GB 461GB xfs sda6 Linux /home On boot with manually typed grub stanza I changed the Grub timeout in YaST2, which inexplicably created a new initrd identical to the existing one, but did fix HD booting at least until I install OS X again. Also I looked for fallback.efi. The only place I found it was /usr/lib64/efi/fallback.efi. -- "Wisdom is supreme; therefore get wisdom. Whatever else you get, get wisdom." Proverbs 4:7 (New Living Translation) Team OS/2 ** Reg. Linux User #211409 ** a11y rocks! Felix Miata *** http://fm.no-ip.com/ -- To unsubscribe, e-mail: opensuse-support+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-support+owner(a)opensuse.org

5 4

[opensuse-support] Invalid password file /run/systemd/ask-password/ask.Kilegy
by Ralph 09 Jul '18

09 Jul '18

[Leap 15 / btrfs, fresh install about a month old, running off a NVMe m.2 2280, on a Dell T3620 that was previously booting (and still multiboots) 42.3 and some others off a rotating drive] After an aborted boot and a reboot I got the following messages in the reboot's journal: dellT3620 systemd-tty-ask-password-agent[866]: Invalid password file /run/systemd/ask-password/ask.Kilegy dellT3620 systemd-tty-ask-password-agent[866]: Failed to show password: Bad message These journal messages are gone after another subsequent reboot but that's scary words. Who/what is 'Kilegy' (there's no such file, now)? What exactly is/was this all about? Thanks! Ralph -- To unsubscribe, e-mail: opensuse-support+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-support+owner(a)opensuse.org

3 4

[opensuse-support] dkms-acpi_call %posttrans script failed
by H Zeng 06 Jul '18

06 Jul '18

Dear all, My openSUSE Tumbleweed installation keeps getting warning message like following when upgrade the system, ``` dkms-acpi_call-1.1.0-6.210.noarch.rpm %posttrans script failed (returned 10) ``` Does anyone know what is the status? Best regards, ZHX -- To unsubscribe, e-mail: opensuse-support+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-support+owner(a)opensuse.org

4 6

[opensuse-support] zypper update failed after power outage
by Constant Brouerius van Nidek 06 Jul '18

06 Jul '18

After an unexpected power outage during an update I have run into a problem. The zypper dup stops right after checking for file conflicts (no conflicts) with following information : Installation of openSUSE-Addon-NonOss-release-2014-324.1.x86_64 failed: Error: Subprocess failed. Error: RPM failed: error: can't create transaction lock on /var/lib/rpm/.rpm.lock (Read-only file system) Retry does not produce a different output and ignore give me a whole riddle of similar remarks zypper clean && zypper ref && zypper dup do not solve a thing. Any ideas for a repair? -- opensuse:tumbleweed:20180701 Qt: 5.11.1 KDE Frameworks: 5.47.0 - KDE Plasma: 5.13.2 - kwin 5.13.2 kmail2 5.8.2 - akonadiserver 5.8.2 - Kernel: 4.17.3-1-default -- To unsubscribe, e-mail: opensuse-support+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-support+owner(a)opensuse.org

3 2

[opensuse-support] how to activate an USB disc drive?
by Constant Brouerius van Nidek 06 Jul '18

06 Jul '18

>From a friend I got the use of a HP USB compact DVD disc rewrite drive. It is recognized without problem by his windows setup but at my Tumbleweed I see no activity. How can I start activating this USB device? -- opensuse:tumbleweed:20180627US Qt: 5.11.1 KDE Frameworks: 5.47.0 - KDE Plasma: 5.13.1 - kwin 5.13.1 kmail2 5.8.2 - akonadiserver 5.8.2 - Kernel: 4.17.2-1-default -- To unsubscribe, e-mail: opensuse-support+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-support+owner(a)opensuse.org

3 4

[opensuse-support] firewalld nfs libreoffice
by Simon Becherer 05 Jul '18

05 Jul '18

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi, i changed my tumbleweed from susefirewall2 to firewalld problem now: nfs works when i use midnight commander to browse or copy files. nfs did NOT work if i like to open a file on a nfs directory with libreoffice. libreoffice completely stops response. when i stop firewwalld it starts to react again. so i guess some "magic" port must additionally opened (what was before automatically opened in susefirewall2) ================ my setup: i have serveral tumbleweed (and older opensuse) systems, using nfs as host and client to be able to go from every computer to every other (all only ipv4 systems, ipv6 disabled, static addresses). was working fine with tumbleweed and susefirewall2 in yast2 firewalld assigned to my network bridge and adapter "home" and opened/set up for for "home": mdns (no idea what it is for, it was open) 5353 udp mountd (without this nfs not working) 20048 tcp 20048 udp nfs3 (without this nfs not working) 2049 tcp 2049 udp rpc-bind (without this nfs not working) 111 tcp 111 udp samba (beause i later on need also a samba server running) 139 udp+tcp 445 udp+tcp (did i need other things to open??? (like for nfs????)) ssh 22tcp x11 (needed for SOME graphical ssh output) 6000-60063 udp+tcp ===================== question a) what port (service name) i miss here to get the nfs also with libreoffice to work. question b) how did i see in an old setup (susefirewall2) what ports are open (not the service names inside yast2 these where in my old setup ONLY NFS-client NFS-server SSH-server but there must be more ports behind this "synonyms" than in the new firewalld-yast setup) question c) how did i see in a firewalld setup (or some log file) what port libreoffice was ask for an was blocked. question d) did i have to open for samba more ports(service-names-in-yast) (as i also need not only "nfs3" for nfs (+mountd+rpc-bind) =============================== thanks in advance simoN - -- www.becherer.de -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.19 (GNU/Linux) iQIcBAEBAgAGBQJbH4ObAAoJEOuDxDCJWQG+XHYQAJbMT67N6MRZX8e4RJQ/WEYY D+/oqcfohd/owm66/5ATmReUhfo3FJKHo4RHBSHmTGMu8s5LHwjLnHfFxITYJAZj zM6bp8THu45QjycALuLFeR7HUBnXnuMbc9stZeRctrkdIPz3rqJGgvcs2WBvQcU8 Z/GiJvpN1hNBYmnLaykLCvseY4NsNYg53RylGymLrYfy40wZOtfFyZoikvsSYM3v H3OX8AgWBvDoDE7tpyYzlh8AZoTxDo/us0Oq9Jf8YeqSWnK/ufoCMkBd3C2nA+EN l022mwPT+ETjaTnGvjSuUzpgL4ayEcG+K5UAv6T/LBF4koC3NTWLen4TkGdXau4c ihzQrfYYDRzVLWsL5JJvA/61svOVPK5/tmsX68zWTAW42k6V3GudvltLfkCE6En5 qJR0Ld7+zn/DcnlXfh6Au8zyHDROcctktoMDeUWG5OkSqkQ7uJs9CpC97gga9gUz OQYmECHRyutq0mwSemdhcTW5lif0ijIYCwpwsAcjphmJSK8KCI6QbMY7Cs4+Db/7 y+nGuBBbBhs3H6OQkbY8Q2GaFLly8Z7N/WGfpzB/Do7PZqnz40wMWXhOFb03Qt0M v6TkwEka0/duoLjJHBSwOBJ6T10VQtKXYKuulQx2dtsJC0eBPRWE1GdMsavB9dpH DA/sYicXNBFjPKlvzehq =UTCy -----END PGP SIGNATURE----- -- To unsubscribe, e-mail: opensuse-support+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-support+owner(a)opensuse.org

4 12

[opensuse-support] lost content in clipboard copied from document after LibreOffice is closed
by H Zeng 05 Jul '18

05 Jul '18

Hi, Does anybody notice this? I open a word document (.docx) with LibreOffice Writer, copy a sentence from that document, paste it inside Kate, close Writer, then paste again. The results are the first paste works but the second paste has no content being pasted actually as if there is no content being copied. System: ``` cnzhx@ostp:~> cat /etc/os-release NAME="openSUSE Tumbleweed" # VERSION="20180701" ID="opensuse-tumbleweed" ID_LIKE="opensuse suse" VERSION_ID="20180701" PRETTY_NAME="openSUSE Tumbleweed" ANSI_COLOR="0;32" CPE_NAME="cpe:/o:opensuse:tumbleweed:20180701" BUG_REPORT_URL="https://bugs.opensuse.org" HOME_URL="https://www.opensuse.org/" ``` All the best, Zeng -- To unsubscribe, e-mail: opensuse-support+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-support+owner(a)opensuse.org

2 1

[opensuse-support] waiting for ntpd to synchronize system clock blocks reasonable shutdown time
by Felix Miata 03 Jul '18

03 Jul '18

I have multiple installations of 42.3, 15.0 & TW. Some simply won't shutdown or reboot without a lengthy delay for $SUBJECT, at least 20 seconds. This typically (only?) happens after zypper up or dup, such as just happened with TW20180629 on host big31. Anyone else commonly see this? -- "Wisdom is supreme; therefore get wisdom. Whatever else you get, get wisdom." Proverbs 4:7 (New Living Translation) Team OS/2 ** Reg. Linux User #211409 ** a11y rocks! Felix Miata *** http://fm.no-ip.com/ -- To unsubscribe, e-mail: opensuse-support+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-support+owner(a)opensuse.org

3 2

[opensuse-support] https://software.opensuse.org broken?
by Simon Becherer 02 Jul '18

02 Jul '18

Hi, since several weeks https://software.opensuse.org/ is (on all my machines) unbelievable slow, and search for packets did sometimes not find things. often i get a: 504 Gateway Time-out (i do not have internal gateways, so it must be a error from opensuse) i read somewhere in a mailinglist that the search engine has problems, are there plans to solve this, is there a time line when it will work again? or did only i have this problems, and if, how to find whats going on? or did we have to search all home and additional repos by directory to get correct results? simoN -- www.becherer.de -- To unsubscribe, e-mail: opensuse-support+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-support+owner(a)opensuse.org

5 11