- openSUSE Multimedia

Sound Problems: Santa Cruz/Turtle Beach on SuSE 9.0 Prof
by Sabine 05 Feb '04

05 Feb '04

Hi everyone, I'm not sure what happened, but today my soundcard stopped working. It's the Santa Cruz from Turtle Beach Driver: CS4614/22/24 CrystalClear SoundFusion Accelerator The card works fine under Win2K (Dualbootsystem), so I don't think the card itself is the problem. What changed is that I updated to KDE 3.2 Final yesterday (including all the other files that go with it like arts, qt3, etc), before I had the RC1 version running. I downloaded it via YAST from SuSE. Yesterday the sound worked fine, but now I can't remember if I listened to music after the reboot. Has anyone else problems with this particular driver? I can install the onboard sound chip without a problem (VT82C686 AC97), and it does work, but the sound is so bad, that I rather have no sound at all. Any tips are welcome. Thanks -- Sabine

1 0

Re: [suse-multimedia-e] Webcam working in 8.2 but not in 9.0
by ricardo＠holambra.freeserve.co.uk 04 Feb '04

04 Feb '04

Carlos thank you very much for your info, tell me what is the name of that model? many thanks > Message date : Jan 28 2004, 08:14 PM > From : "Carlos Lorenzo Matés" > To : suse-multimedia-e(a)suse.com > Copy to : > Subject : [suse-multimedia-e] Webcam working in 8.2 but not in 9.0 > Hi. > > I have a Creative USB WebCam Model Nº: P00040 > > This webcam worked in SuSE 8.2 with ov511 module (this module automatically > loaded the ov518_decomp), I'm trying to use this webcam in SuSE 9.0 but > doesn't work. Is needed to recompile the kernel to make usb webcams work? > > -- > > Un Saludo. > > Carlos Lorenzo Matés > > > -- > To unsubscribe send e-mail to suse-multimedia-e-unsubscribe(a)suse.com > For additional commands send e-mail to suse-multimedia-e-help(a)suse.com > > > Freeserve AnyTime - HALF PRICE for the first 3 months - Save £7.50 a month www.freeserve.com/anytime

5 8

Fwd: Re: [suse-multimedia-e] Xine playing avi files
by Gunter 02 Feb '04

02 Feb '04

3 3

How to get USB modem to work
by Sarel Theron 31 Jan '04

31 Jan '04

Hi I have an USB modem that worked fine with SuSE 8.0, 8.1 and 8.2. But since upgrading to 9.0 I can not get it to work. Where can I get some more info on this? Regards Sarel Theron Tel : +27 (0)11 805 3247 Cell: +27 (0)83 561 7900 sarel(a)o4s.co.za http://www.o4s.co.za

1 0

Webcam working in 8.2 but not in 9.0
by Carlos Lorenzo Matés 28 Jan '04

28 Jan '04

Hi. I have a Creative USB WebCam Model Nº: P00040 This webcam worked in SuSE 8.2 with ov511 module (this module automatically loaded the ov518_decomp), I'm trying to use this webcam in SuSE 9.0 but doesn't work. Is needed to recompile the kernel to make usb webcams work? -- Un Saludo. Carlos Lorenzo Matés

1 0

WebCam
by ricardo＠holambra.freeserve.co.uk 27 Jan '04

27 Jan '04

Hello everyone, I am looking to buy a good webcam that works with Suse 9.0 or Suse 8.2. I currently have a QuickCam but the picture is really bad so I want to buy something with a higher quality picture can anyone recommend anything? Many Thanks Ricardo Wagemaker Freeserve AnyTime - HALF PRICE for the first 3 months - Save £7.50 a month www.freeserve.com/anytime

2 1

Xine playing avi files
by Alidar 26 Jan '04

26 Jan '04

I would like to be able to play avi files but can't seem to get it working. The sound plays but no video. I'm using kaffiene. I had to install the xvid codec under windows to get them to play...is there something similar I need to do with suse for it to work?

2 1

MPlayer 0.92-4 and SuSE 9.0
by Jose J. Cintron 16 Jan '04

16 Jan '04

Just installed SuSE 9.0 and when I try to install MPlayer I get a message saying that libsmbclient.so.0 is needed. 2 questions come to mind 1. Why does Mplayer need smbclient? 2. I already have libsmbclient3 installed, what is it looking for? I even tried creating a sym link to libsmbclient3.so.0 to no avail. Any help will be appreciated.

4 3

pinnacle pctv problems
by Samuel Braun 15 Jan '04

15 Jan '04

Hello guys Recently i installed the new suse linux 9.0 on my computer. The computer has also a pinnacle pctv pci card inside. The setup detected the card automatically. After playing around with the tv applications (kwintv, xawtv) I noticed, that I'm not able to get all the channels. I considered the channels list from our cablenet. I noticed that all UHF channels and some VHF OSB channels are impossible to get. I found out that, it has something to do with the driver, because before I had linux on my computer I used windows and there the tv card worked very well with all channels. The cable is also working correctly, checked it with a normal TV. So I started yast and went to the tv-card section. Here I'm able to select a tuner. The default option, which was selected, is standard tuner. I tried a few, but the problem is that I don't exactly know which tuner device I have. But there was no change to the channels problem. Today I tried to look for some tuner names directly on the pci card, but I didn't find anything. One one big "chip" there is the pinnacle logo and on one another chip there is "Connexant Fusion 878A". My channellist (frequencies): http://www.cablecom.ch/tvradio/sendertabelle.htm?type=plz&keyword=943500&asc =1#Tv

5 9

transcode --import_v4l
by Sam Braun 15 Jan '04

15 Jan '04

Hi guys Another problem I have: I use transcode --import_v4l [Channel Number],[Channel Name] to record from my tv card. The problem is: I don't know where to get the channel number. I tried transcode --import_v4l 0,[Channel Name] and the result is: It records always from the same channel. The channel names i read from the .xawtv file. If I put the number, which I see in xawtv (right mouse click on the screen) as parameter transcode says: invalid number or something like that. On the transcode website there is no documentation about the --import_v4l parameter. Has anybody some informations about this? Thanks in advance Samuel -- +++ GMX - die erste Adresse für Mail, Message, More +++ Neu: Preissenkung für MMS und FreeMMS! http://www.gmx.net

1 0