Dominique Michel wrote:
> My MIDI sound is not working with my i815 soundchip and SuSe 8.0.
> I have downloaded the upgrade and configurated it with alsaconf, but
> it's not working more, the driver is the correct one, the
> snd-intel18x0.o.
> Only the PCM sound is OK, timidity is working fine.
> With Mozilla, it's strange: if the link is a direct link to a MIDI file,
> it's working, but if the MIDI file is linked
> with an embed tag in the code of the page, all i get is a little comment
> at the bottom "running helper..." and no sound at all.
>
> If i try with configuration, son, MIDI in the kdm menu, i get at i have
> no MIDI port.
> In the config menu, sound, mixing console is not working at all. Kmidi
> is working but
> i can see the leds taht go up and down, but i hear nothing. With kmid,
> it's worse, i get only a crash with signal 11 from it or kdm.
>
> The sound part of the module.conf is as follow:
>
> # Aliases for OSS
> # alias sound off
> # alias midi off
>
> # OSS/Free setup
> alias sound-services-0-0 snd-mixer-oss
>
> # uniq.virtual:Sound card
>
> #
> # --- BEGIN: Generated by ALSACONF, do not edit. ---
> # --- ALSACONF verion 0.9.0 ---
> alias char-major-116 snd
> alias snd-card-0 snd-intel8x0
> alias char-major-14 soundcore
> alias sound-slot-0 snd-card-0
> alias sound-service-0-0 snd-mixer-oss
> alias sound-service-0-1 snd-seq-oss
> alias sound-service-0-3 snd-pcm-oss
> alias sound-service-0-8 snd-seq-oss
> alias sound-service-0-12 snd-pcm-oss
> options snd snd_major=116 snd_cards_limit=1 snd_device_mode=0666
> options snd-intel8x0 snd_index=0
> # --- END: Generated by ALSACONF, do not edit. ---
>
>
> Can somebody help me with to fix this problem? I'm sure at it must be
> a possibility to have the seuquencer working. I have proved with
> timidity as server, but i don't now how i must configure the MIDI
> ports to have them to work, all i get is a message like what timidity
> was working and att it was 2 Midi ports, but back in configuration,
> sound, midi, nothing is here..
>
> Thanks
> Dominique Michel
>
>
>
Well, i have done some experiment. If i try to run kmid as root from a
terminal, i get the interface
but nothing else. just a few messages as follow:
DCOPServer up and running.
Each time i click to play come:
Player :: There are no midi ports !
And when i quit the program:
FOO:/home/dom/Desktop # kdeinit: Fatal IO error: client killed
kdeinit: sending SIGHUP to children.
kdeinit: sending SIGTERM to children.
kdeinit: Exit.
Mutex destroy failure: Périphérique ou ressource occupé
sh: dcopserver_shutdown: command not found
I have take a look with ls and i get
lrwxrwxrwx 1 root root 9 jun 21 23:07 /dev/dsp ->
/dev/dsp0
crw------- 1 dom users 14, 3 jun 21 23:07 /dev/dsp0
lrwxrwxrwx 1 root root 11 jun 21 23:07 /dev/audio ->
/dev/audio0
crw------- 1 dom users 14, 4 jun 21 23:07 /dev/audio0
lrwxrwxrwx 1 root root 10 jun 21 23:07 /dev/midi ->
/dev/midi0
crw------- 1 dom users 14, 2 jun 21 23:07 /dev/midi0
I'm very tired with this problem and i need my sleep. Have anyone a
suggestion or a clue to what i must prove to do?
Dominique Michel
Is there any way to simply have some background (console) task
AUTOMATICALLY play that cd in background as soon as I put that
cd into the drive?
How do I do that? (console solutions please!)
=======
thanks, also text pointers appreciated.
cda is running (started with cda on), now how do I instruct
cda to start playing after I have inserted an audio cd?
Or maybe a different console tool?
--
*º¤., ¸¸,.¤º*¨¨¨*¤ =Oliver@home= *º¤., ¸¸,.¤º*¨¨*¤
This is Linux country.
If you listen carefully, you can hear Windows reboot...
Hi,
I am new to the list as well as being fairly new to Linux and I
would appreciate if someone can help me on understanding that:
The wav files I generate with gramofile program, out of the line
input of the sound card, seems normal in size and, in fact, sounds OK
if I play it directly with -say- xmms player. But went I intent to burn
a CD with they, I get an error because each track is supposed to last
for more than 100 min. (in fact they have about 4 or 5min. each).
If I convert the wav files into mp3 format, and then I convert them
back to wav format, all goes OK.
The GramoFile version is 1.6 (that I got from Ftp SuSE site because,
on the contrary that is said in the Applications manual, it is not among
the packages suplayed with the distro) and I run SuSE 7.2 in a
Duron-800 based PC.
Regards,
Toni
I read Patrick's question of the 11 Jun 2002 22:26:05 with interest as it
seemed to describe the problem that I am experiencing.
I did exactly as recommended by Dieter in his reply (ln -sf /dev/sr0
/dev/cdrom) and since it worked for Patrick, but not for me I must assume
that the problem is different.
I can get Kscd to run with an audio disc in the CDRom/CDWriter and the
display seems to indicate that the CD is running, viz. the timer is
running. It shows volume at 59%. However there is no sound output whatsoever.
Yast2 Control centre -audio test result is perfect
Hardware info identifies the CD-RW correctly and it is shown as /dev/sr0
under both CDRom and scsi details.
CDR-W is Plextor 12/10/32A and works properly with data files and in all
respects under windows.
I am new to Linux and intend to persevere with it, but I would like to get
it up and running first in order to explore it.
Can anyone help me please?
David Rose
My MIDI sound is not working with my i815 soundchip and SuSe 8.0.
I have downloaded the upgrade and configurated it with alsaconf, but
it's not working more, the driver is the correct one, the snd-intel18x0.o.
Only the PCM sound is OK, timidity is working fine.
With Mozilla, it's strange: if the link is a direct link to a MIDI file,
it's working, but if the MIDI file is linked
with an embed tag in the code of the page, all i get is a little comment
at the bottom "running helper..." and no sound at all.
If i try with configuration, son, MIDI in the kdm menu, i get at i have
no MIDI port.
In the config menu, sound, mixing console is not working at all. Kmidi
is working but
i can see the leds taht go up and down, but i hear nothing. With kmid,
it's worse, i get only a crash with signal 11 from it or kdm.
The sound part of the module.conf is as follow:
# Aliases for OSS
# alias sound off
# alias midi off
# OSS/Free setup
alias sound-services-0-0 snd-mixer-oss
# uniq.virtual:Sound card
#
# --- BEGIN: Generated by ALSACONF, do not edit. ---
# --- ALSACONF verion 0.9.0 ---
alias char-major-116 snd
alias snd-card-0 snd-intel8x0
alias char-major-14 soundcore
alias sound-slot-0 snd-card-0
alias sound-service-0-0 snd-mixer-oss
alias sound-service-0-1 snd-seq-oss
alias sound-service-0-3 snd-pcm-oss
alias sound-service-0-8 snd-seq-oss
alias sound-service-0-12 snd-pcm-oss
options snd snd_major=116 snd_cards_limit=1 snd_device_mode=0666
options snd-intel8x0 snd_index=0
# --- END: Generated by ALSACONF, do not edit. ---
Can somebody help me with to fix this problem? I'm sure at it must be
a possibility to have the seuquencer working. I have proved with
timidity as server, but i don't now how i must configure the MIDI ports
to have them to work, all i get is a message like what timidity was
working and att it was 2 Midi ports, but back in configuration, sound,
midi, nothing is here..
I have RTFMed and proved a lot of things but nothing have helped.
I have compile and run the test in the MIDI-mini-howto and the result is
at the libraries are installed.
When i click to a MIDI file in konqueror, i can see the interface in
koncqueoror but a message is coming
"/dev/sequencer cannot be opened, another program is probably using it"
Have somebody a sugestion?
Thanks
Dominique Michel
Locations:
==========
www.propellerheads.sewww.steinberg.de
Program:
========
ReBirth 338 1.0
ReBirth 338 2.0+
Question:
=========
I have searched the entire Propellerheads' homepage and other sources.
I have exchanged mails with M.Zetterquist, one of the programmers and
still do.
I need a KDE (or even better: CONSOLE) player for the audio RB format,
I was able to locate format descriptions on the above pages, but even
the programmers do not know of a Rebirth Format player (.RBS file ext)
under Linux environment. ("devzone" on the HP above)
Now the ?:
Is there any of you capable of programming such a thing? Maybe you
know one of that kind. Please PM me, I am in contact with Propheads
for Linux support anyway.
So far I have found similar analogue synth programs for Linux, but
none of those I know does support the ingenious .RBS Format.
HTH/TiA
Olli
--
*º¤., ¸¸,.¤º*¨¨¨*¤ =Oliver@home= *º¤., ¸¸,.¤º*¨¨*¤
I http://www.bmw-roadster.de/Friends/Olli/olli.html I
I http://www.bmw-roadster.de/Friends/friends.html I
I http://groups.yahoo.com/group/VGAP-93 I
I http://home.t-online.de/home/spacecraft.portal I
>>> Telek0ma iBBMS - soon back online +49.4503.TRSi1/TRSi2 <<<
3rd try one week later: On Multimedia, apparently, no one knows
to answer. So I ask this here.
-orig mail-
I thought I sent this out on june 9th, but it never appeared
on list, but it was my fault: I did not open a new thread.
Please excuse that typo of mine!
written by Lew Wolfgang:
>Just us it like this:
>
>mpg123 -s something.mpg >something.cdr
>
>The file format is not .wav, but in the format
>that may be burned directly by cdrecord if you
Where is the difference between plain .WAV format
and what mpg123 writes as above?
Want to know about technical data and background.
Thanks!
Olli
--
*º¤., ¸¸,.¤º*¨¨¨*¤ =Oliver@home= *º¤., ¸¸,.¤º*¨¨*¤
I http://www.bmw-roadster.de/Friends/Olli/olli.html I
I http://www.bmw-roadster.de/Friends/friends.html I
I http://groups.yahoo.com/group/VGAP-93 I
I http://home.t-online.de/home/spacecraft.portal I
>>> Telek0ma iBBMS - soon back online +49.4503.TRSi1/TRSi2 <<<
Ok, this is the story:
The standard configuration using YAST2 in SuSE7.3 (just after installation) didn't detected the sound card (or chipset in this case)
Finally, I used "alsaconf" in text mode, and it was detected as "Intel 82820 820 Camino2 AC97"
I used "gamix" in Xwindows to "unmute" the sound.
Sound is playing, BUT
1- Everything is "quicker" than it should. Every sound or song is played a little quicker than normal.....
2- I get the following messages:
- xconsole:
Jun 14 09:34:31 winlinux kernel: snd: snd_intel8x0_chip_init: invalid AC'97 codec
Jun 14 09:34:31 winlinux kernel: snd: Intel ICH soundcard not found or device busy
Jun 14 09:36:34 winlinux insmod: insmod: a module named snd-mixer-oss already exists
Jun 14 09:36:34 winlinux insmod: insmod: insmod sound-service-0-3 failed
- /var/log/boot.msg (messages when the machine boots)
/etc/init.d/rc5.d/S21alsasound start
Starting sound driver: intel8x0/lib/modules/2.4.10-4GB/misc/snd-card-intel8x0.o: init_module: No such device
Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters
/lib/modules/2.4.10-4GB/misc/snd-card-intel8x0.o: insmod /lib/modules/2.4.10-4GB/misc/snd-card-intel8x0.o failed
/lib/modules/2.4.10-4GB/misc/snd-card-intel8x0.o: insmod snd-card-intel8x0 failed
failed
<notice>'/etc/init.d/rc5.d/S21alsasound start' exits with status 1
- /var/log/messages
Jun 14 09:34:31 winlinux kernel: PCI: Found IRQ 9 for device 00:1f.5
Jun 14 09:34:31 winlinux kernel: PCI: Sharing IRQ 9 with 00:1f.3
Jun 14 09:34:31 winlinux kernel: PCI: Setting latency timer of device 00:1f.5 to 64
Jun 14 09:34:31 winlinux kernel: snd: snd_intel8x0_chip_init: invalid AC'97 codec
Jun 14 09:34:31 winlinux kernel: snd: Intel ICH soundcard not found or device busy
Jun 14 09:34:31 winlinux kernel: Switching off penguin.
Jun 14 09:36:20 winlinux PAM-unix2[975]: session started for user jtorres, service xdm
Jun 14 09:36:34 winlinux kernel: PCI: Found IRQ 9 for device 00:1f.5
Jun 14 09:36:34 winlinux kernel: PCI: Sharing IRQ 9 with 00:1f.3
Jun 14 09:36:34 winlinux kernel: PCI: Setting latency timer of device 00:1f.5 to 64
Jun 14 09:36:34 winlinux insmod: insmod: a module named snd-mixer-oss already exists
Jun 14 09:36:34 winlinux insmod: insmod: insmod sound-service-0-3 failed
- /etc/modules.conf
# Alsa sound support.
# Warning: please don't modify comments over aliases 'snd-card-#'
alias char-major-116 snd
alias char-major-14 off
options snd snd_cards_limit=1 snd_major=116
options snd-card-intel8x0 snd_index=0
# uniq.virtual:Sound card
alias snd-card-0 snd-card-intel8x0
# YaST2: sound system dependent part
#
alias sound-slot-0 snd-card-0
alias sound-service-0-0 snd-mixer-oss
alias sound-service-0-1 snd-seq-oss
alias sound-service-0-3 snd-pcm-oss
alias sound-service-0-8 snd-seq-oss
alias sound-service-0-11 snd-mixer-oss
alias sound-service-0-12 snd-pcm-oss
Anyone has any idea? I think the messages from kernel are generated by "alias" and "sound" being all mixed up.. is this true?
Thank you all
--------------------------------------------------------
Juan Francisco Torres Ch.
Desarrollo, Tecnología y Redes
NETCO LTDA
I thought I sent this out on june 9th, but it never appeared
on list, but it was my fault: I did not open a new thread.
Please excuse that typo of mine!
written by Lew Wolfgang:
>Just us it like this:
>
>mpg123 -s something.mpg >something.cdr
>
>The file format is not .wav, but in the format
>that may be burned directly by cdrecord if you
Where is the difference between plain .WAV format
and what mpg123 writes as above?
Want to know about technical data and background.
Thanks!
Olli
--
*º¤., ¸¸,.¤º*¨¨¨*¤ =Oliver@home= *º¤., ¸¸,.¤º*¨¨*¤
I http://www.bmw-roadster.de/Friends/Olli/olli.html I
I http://www.bmw-roadster.de/Friends/friends.html I
I http://groups.yahoo.com/group/VGAP-93 I
I http://home.t-online.de/home/spacecraft.portal I
>>> Telek0ma iBBMS - soon back online +49.4503.TRSi1/TRSi2 <<<