May 2007 - openSUSE Multimedia - openSUSE Mailing Lists

Video editing with Cinelerra & Kino
by Bob Williams 12 May '07

12 May '07

I am using Kino to capture my miniDV movies, and would like to use Cinelerra for the editing, but it runs pig slow even though I've recently upgraded my graphics card to nvidia 7600 and got direct rendering working. Having read Rob Fisher's <http://www.robfisher.net> excellent guides I understand that cinelerra needs it's movie clips to be in *.mov format. Kino can capture in raw DV or *.avi. Does anyone know of a utility for encapsulating *.dv files into *.mov format. The utility mentioned by Rob Fisher doesn't work here. Maybe because it's 32-bit? and I'm running a 64-bit system? -- Bob openSUSE 10.2 x86_64, Kernel 2.6.18.8-0.3, KDE 3.5.6 r31.4 --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-multimedia+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-multimedia+help(a)opensuse.org

2 2

unsubscribe
by Marco Ghirlanda 12 May '07

12 May '07

--------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-multimedia+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-multimedia+help(a)opensuse.org

1 0

General Big Error In Opensuse 10.2
by Ruslan Strazhnyk 04 May '07

04 May '07

Hello, recently I have re-installed opensuse 10.2 on my pc. I have Athlon 3200+, Asus A7n8xe-deluxe mainboard, Ati radeon 9600pro, 2 ide hdd and also skystar 2 dvb card. So everything went fine and i have installed satellite internet access using skystar 2. Also I configured Yast and began to update my opensuse, and that was all this night. And when I got uo in the morning all software was installed, and i begin to work. Then after an hour something strange happened, all desktop was unusable and some strange artifacts were on screen, so I decided to reboot my PC. and what happened after that: 1.Flexcop b2bc skystar dvb modules could not start so no sattellite internet and TV 2.Only root can login to the system, on other users it written "cannot find users directory" but this directory is . 3.Firefox not starting. 4.sendmail not starting. and this is boot.msg <4>eth0: Yukon Gigabit Ethernet 10/100/1000Base-T Adapter <4> PrefPort:A RlmtMode:Check Link State <3>dvb_core: Unknown parameter `parport_pc' <4>stv0299: Unknown symbol timeval_usec_diff <4>stv0299: Unknown symbol dvb_frontend_sleep_until <4>b2c2_flexcop: Unknown symbol dvb_dmxdev_init <4>b2c2_flexcop: Unknown symbol stv0299_writereg <4>b2c2_flexcop: Unknown symbol dvb_register_adapter <4>b2c2_flexcop: Unknown symbol dvb_dmx_swfilter_packets <4>b2c2_flexcop: Unknown symbol dvb_dmx_release <4>b2c2_flexcop: Unknown symbol dvb_net_init <4>b2c2_flexcop: Unknown symbol dvb_dmx_swfilter <4>b2c2_flexcop: Unknown symbol dvb_dmxdev_release <4>b2c2_flexcop: Unknown symbol dvb_net_release <4>b2c2_flexcop: Unknown symbol dvb_unregister_frontend <4>b2c2_flexcop: Unknown symbol dvb_register_frontend <4>b2c2_flexcop: Unknown symbol stv0299_attach <4>b2c2_flexcop: Unknown symbol dvb_unregister_adapter <4>b2c2_flexcop: Unknown symbol dvb_dmx_init <4>b2c2_flexcop_pci: Unknown symbol flexcop_device_exit <4>b2c2_flexcop_pci: Unknown symbol flexcop_pass_dmx_packets <4>b2c2_flexcop_pci: Unknown symbol flexcop_dma_control_timer_irq <4>b2c2_flexcop_pci: Unknown symbol flexcop_sram_set_dest <4>b2c2_flexcop_pci: Unknown symbol flexcop_dma_allocate <4>b2c2_flexcop_pci: Unknown symbol flexcop_dma_xfer_control <4>b2c2_flexcop_pci: Unknown symbol flexcop_dma_free <4>b2c2_flexcop_pci: Unknown symbol flexcop_device_kmalloc <4>b2c2_flexcop_pci: Unknown symbol flexcop_dma_config <4>b2c2_flexcop_pci: Unknown symbol flexcop_device_kfree <4>b2c2_flexcop_pci: Unknown symbol flexcop_device_initialize <4>b2c2_flexcop_pci: Unknown symbol flexcop_pass_dmx_data <4>b2c2_flexcop_pci: Unknown symbol flexcop_dma_config_timer <4>b2c2_flexcop_pci: Unknown symbol flexcop_dump_reg <4>b2c2_flexcop_pci: Unknown symbol flexcop_i2c_request <4>b2c2_flexcop_pci: Unknown symbol flexcop_eeprom_check_mac_addr <6>Adding 1574328k swap on /dev/hdb5. Priority:-1 extents:1 across:1574328k <6>ohci_hcd 0000:00:02.0: wakeup Could anyone help me with that problem? -- Best regards, Ruslan Strazhnyk icq: 1858954 skype: ruslanstrazhnyk mobile: +380632311999 --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-multimedia+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-multimedia+help(a)opensuse.org

1 0

Labelflash in openSUSE
by Ruslan Strazhnyk 03 May '07

03 May '07

Hello, Does anybody use Labelflash on opensuse linux? I have bought NEC AD-7173 18x DVD-Burner. But it has only Windows labeling software, also Nero for Windows can label it. What should I do to label DVD disks in linux? Regards... Ruslan Strazhnyk icq: 1858954 --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-multimedia+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-multimedia+help(a)opensuse.org

1 1

Re: [opensuse-multimedia] Jahshaka 64 bit rpm binaries?
by m.van.munnen＠hccnet.nl 02 May '07

02 May '07

Hi, >> Main Actor looks quite good but is outside >> my budget at $199. I have just read that Mainactor comes at no cost in Suse 10.2 that you buy. And Suse 10.2 shall be much cheaper dan $199 I bet. Marc van Munnen --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-multimedia+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-multimedia+help(a)opensuse.org

2 2

Jahshaka 64 bit rpm binaries?
by Bob Williams 02 May '07

02 May '07

Does anyone know of there are any rpm packages of jahshaka for openSUSE x86_64 systems? I'm trying to find a linux movie editing program that can replace Pinnacle Studio which I used in Windows. Windows doesn't live here anymore ;) Main Actor looks quite good but is outside my budget at $199. I've installed cinelerra but it can't cope with my ATI Radeon 9200 video card, because the default Mesa driver isn't good enough. I've followed all the instructions at http://en.opensuse.org/ATI#64-bit_users but without success. Kino is too basic for my needs, likewise Camelot and Coriander -- Bob openSUSE 10.2 x86_64, Kernel 2.6.18.8-0.1, KDE 3.5.6 r31.4 --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-multimedia+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-multimedia+help(a)opensuse.org

2 3

Re: [opensuse-multimedia] Jahshaka 64 bit rpm binaries?
by Bob Williams 01 May '07

01 May '07

On Tuesday 01 May 2007 22:49:47 Richard Creighton wrote: > I am curious though...First, would it be acceptable if NOT watermarked Yes. AFAICT the software is only crippled in this one respect. > and Second, what is the price of the unwatermarked version? $199. When you pay up, they'll send you a serial number which will unlock the software. > Maybe a > little healthy competition here? > More like offering a taster. -- Bob openSUSE 10.2 x86_64, Kernel 2.6.18.8-0.1, KDE 3.5.6 r31.4 --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-multimedia+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-multimedia+help(a)opensuse.org

1 0

Jahshaka 64 bit rpm binaries?
by Richard Creighton 01 May '07

01 May '07

> Does anyone know of there are any rpm packages of jahshaka for > openSUSE x86_64 systems? I'm trying to find a linux movie editing > program that can replace Pinnacle Studio which I used in Windows. > Windows doesn't live here anymore ;) Main Actor looks quite good but > is outside my budget at $199. I've installed cinelerra but it can't > cope with my ATI Radeon 9200 video card, because the default Mesa > driver isn't good enough. I've followed all the instructions at > http://en.opensuse.org/ATI#64-bit_users but without success. Kino is > too basic for my needs, likewise Camelot and Coriander > -- Bob Cinelerra is probably your best bet despite the hardware issue. In other words, consider changing the video card if need be. I sympathize with your problem having had similar problems when I also made the decision to never again use any software or hardware that *required* Windows in order to work. I can only suggest that until you find your solution that you undertake a concerted effort to write each and every vendor and manufacturer of products that you use or would use explaining that while they probably won't notice the loss of your business individually, they most definitely would notice the increase in business from the many tens of thousands of Linux system owners that would purchase their products if they would properly support Linux in a way similar to their support of Windows and that in many, if not most cases, their investment would be minimal by writing code that uses API's that are "compatible" between multiple OS platforms rather than falling into the trap of proprietary code useful only in one, predatory corporations' OS. Linux is right at 'critical mass' in terms of volume and the smart vendors would be wise to recognize this and provide support now, both in terms of hardware support and in terms of driver and other software support. In so far as the $199 price tag you mentioned; If the product is really what you need, consider that maybe you should bite the bullet because you will enable them to survive and show others (also making products you may in fact need and use in the future, if not now) they can put bread on the tables of their families without resorting to lowering themselves through Windows. --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-multimedia+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-multimedia+help(a)opensuse.org

2 1