Is it normal for the CPU to be running @ 100% anytime I run any programs
that are 3D based? I've seen this on my system running OpenGL plugins
for XMMS and when running TuxKart and Parsec. The programs themselves
seem to be running just fine and seem to be using the 3D capabilities of
my card. Any comments/insights are appreciated. Thanks.
Running SuSE 7.3 Pro, AMD T-bird 1GHz, 3Dfx Voodoo3 2000 AGP with Xfree
4.2.0.
- Greg
my last post for the day, sorry. In the mean time you might want to seriously
consider upgrading from ALSA v0.5.11 to alsa .9xxx
see http://alsa-project.org/
What distro are you running?
On Tuesday 21 May 2002 15:55, you wrote:
> * Gary Counsellor <sineigs(a)eskimo.com> [05-21-02 17:43]:
> > I take it the .mp3s sound ok when played on the windoze side?
> > If so...
> >
> > What is your card?
>
> Sound Driver: 3.8.2-980706 (ALSA v0.5.11 emulation code)
> Kernel: Linux wahoo 2.4.10-4GB #1 Fri Sept 28 17:20:21 GMT 2001 i686
> Config options: 0
> Installed drivers:
> Type 10: ALSA emulation
> Card config:
> Ensoniq AudioPCI ES1731 at 0xd000, irq 5
> Audio devices
> 0: ES1371 DAC2/ADC (DUPLEX)
> Synth devices: NOT ENABLED INCONFIG
> Midi devices:
> 0: ES1371
> Timers:
> 7: system timer
> Mixers:
> 0: Cirrus Logic CS4297A rev A
>
> > What version alsa?
>
> AlsaPlayer 0.99.36
>
> > Also type: dmesg | grep ALSA so we can see if it's loading with no
> > errors.
>
> must load w/o error. There is no output for: dmesg ! grep ALSA
> or for XMMS or noatun
>
> (noatun will start, shows controls and progress, but no sound).
>
> > I wish to know which apps your using to listen to these mp3s.
>
> alsaplayer, freeamp, xmms. Noatun doesn't play (see previous).
>
> tks,
--
Gary Counsellor
http://www.musician2000.com
sineigs.all.attitudes(a)eskimo.com
Please remove .all.attitudes before replying
Hello to everyone,
I have a 3Dfx Interactive Voodoo, but I have some problems when I try to run
3D applications (for example gears) as normal user. The installation has set
the script_3d variable to switch2mesasoft. I run the script switch2mesa3dfx,
but when I try to execute a 3D application( gears) I get a "segmentation
fault" as normal user. As root things are better and at least the gears app
or the OpenGL spectrum analyser of xmms work fine.
(I use XFree86 version 3 to support my Diamond Stealth S3Trio 64 card and the
packages mesa3dfx and glide_vg are installed)
I read the documentation about mesa3dfx and it says that I have to run any 3D
application as root, or set uid on such apps!!
How can I fix the 3Dfx to work as normal user?
By the way, in the Kcontrol module "Available Hardware" it show a check mark
near my S3 card and a "tools" mark near my 3Dfx (and near some other hardware
that work fine, that is my monitor, the floppy disk controller etc). What
does this "tools" icon mean? That the relevant hardware is not yet
configured?
Thanks!
--
Konstantinos
Hello, I have SuSe 8.0 Professional installed.
My sound system is working fine. I'm getting sound when I play mpegs or wavs.
When I use the YaST configuration tool, I'm able to get sound.
However, when I try to play a music cd, all of the players see the tracks and
"play" the tracks, but there is no sound.
I can use the DVD-CD rom as a data source.
My hardware configuration for DVD-CDROM according to YaST is as follows:
_NEC DV-5800A
Bus: IDE
CD type: dvd
Class (spec): CD-ROM
Class: Mass Storage Device
Device: _NEC DV-5800A
Device name: /dev/hdc
Prog. interface: 3
Rev: 1.0A
driver: ide-cdrom
My hardware configuration for the CD-RW according to YaST is as follows:
LITE-ON LTR-24102M:
Bus: SCSI
CD type: cdrw
Class(spec): CD-ROM
Class: Mass Storage Device
Device: LITE-ON LTR-24102M
Device name: /dev/sr0
Prog. interface: 2
Rev: 4DS3
Vendor: LITE-ON
driver: ide-scsi
When I change the cd player to use the CD-RW device, it doesn't play either.
Any help is appreciated.
Ed Brown - darkstar(a)toad.net
_________________________________________________________________________
This mail sent via toadmail.com, web e-mail @ ToadNet - want to go fast?
http://www.toadmail.com
On Tuesday 21 May 2002 10:28, you wrote:
> * Gary Counsellor <sineigs(a)eskimo.com> [05-21-02 11:28]:
> > Before trouble-shooting too deeply. try setting your gains on the mixer.
> > You could be recording too hot a signal which would result in a lot of
> > distortion of the nasty variety. Just lower the 'volume setting' for
> > what-ever recording input you're using and retry. If that doesn't do it
> > we can look else where.
> > Good Luck
>
> KMix setting seem OK. All about middle of scale. What is Pcm ??
Short for Pulse Code Modulation, a sampling technique for digitizing analog
signals, especially audio signals. PCM samples the signal 8000 times a
second; each sample is represented by 8 bits for a total of 64 Kbps. There
are two standards for coding the sample level. The Mu-Law standard is used in
North America and Japan while the A-Law standard is use in most other
countries.
PCM is used with T-1 and T-3 carrier systems. These carrier systems combine
the PCM signals from many lines and transmit them over a single cable or
other medium.
What are you recording from? CD? Microphone? Line-in?
Try different recording inputs and see if there is a difference.
Gain or volume setting of your outboard gear can effect what is sent to your
computer and in turn, what your computer records.
>
> The esd problem is corrected. Required initiation as ROOT. Must have
> crashed and left the socket behind ??
I've seen that movie too ;-)
>
> Still have bad distortion thou, and seems to be related to lower
> freq's. It's not my sound system (card & speakers), they are OK in
> winDers. First time it's been booted in 2 months, just to check sound
> card & speakers.
Is distortion coming only from what you record? Try downloading a sound file
or default wave etc. on your computer. Is it distorted?
Or is it only what you record?
--
Gary Counsellor
http://www.musician2000.com
sineigs.all.attitudes(a)eskimo.com
Please remove .all.attitudes before replying
I am using Canon BJC-2000, Epson Stilyplus (color) 880
with SuSE 8. They are working properly with black ink.
But they can not printing with color, so they printing
always with black color.
How can I print with color ink ?
Thank you very much in advance.
--- Anthony Moulen <ajmoulen(a)moulen.org> wrote:
> On Tuesday 21 May 2002 01:49 am, Brian Durant wrote:
> > On Tuesday 21 May 2002 11:53, John Ross Hunt
> wrote:
> > - I tried CUPS but it kept seg-faulting on me so I
> switched to LPRng and
> > - haven't had any problems since. The only
> problem (other than the price
> > of - ink) is that there isn't a native C60 or C80
> driver and/or filter -
> > doo-higgee - with LPRng, so I've been using the
> Color Stylus II driver -
> > without any - problems. I would prefer a native
> driver via CUPS and -
> > gimp-print, but I'm - planning on upgrading to 8.0
> shortly (the local Micro
> > - Center was sold out - believe it or not) and
> after reading this article:
> > -
> > -
>
http://sdb.suse.de/sdb/en/html/jsmeix_print-einrichten-80.html
> >
> > Hmm, the ink price is a concern, but I am
> definitely not planning on
> > upgrading until at least SuSE 8.1 at the earliest
> (I have enough grief as
> > it is, thank you very much), so the lack of
> drivers could actually keep me
> > from purchasing an Epson at all.
> >
> > Cheers,
> >
> > Brian
> The only reason it lacks drivers is because the
> printer is actually newer than
> SuSE 7.3. They can only include drivers for
> printers that exist at the time
> they finalize the versions for the distribution.
> Installing GimpPrint and
> Cups isn't really that hard to do, and once
> installed it works really well in
> my experience. Until about a month ago I would have
> even had 7.3 RPMs I
> could have sent you, but I am no 8.0 now and deleted
> all my old stuff.
>
>
> --
> To unsubscribe send e-mail to
> suse-linux-e-unsubscribe(a)suse.com
> For additional commands send e-mail to
> suse-linux-e-help(a)suse.com
> Also check the archives at http://lists.suse.com
>
__________________________________________________
Do You Yahoo!?
LAUNCH - Your Yahoo! Music Experience
http://launch.yahoo.com
I am having sound problems. I get heavy distortion part of the time.
It may relate to:
pat@wahoo:~> esd
esd: Failed to fix mode of /tmp/.esd to 1777.
Try -trust to force esd to start.
esd: Esound sound daemon unable to create unix domain socket:
/tmp/.esd/socket
The socket is not accessible by esd.
Exiting...
and:
pat@wahoo:~> esd -trust
esd: Failed to fix mode of /tmp/.esd to 1777.
Unable to connect to UNIX socket /tmp/.esd/socket
My config:
Sound Driver: 3.8.2-980706 (ALSA v0.5.11 emulation code)
Kernel: Linux wahoo 2.4.10-4GB #1 Fri Sept 28 17:20:21 GMT 2001 i686
Config options: 0
Installed drivers:
Type 10: ALSA emulation
Card config:
Ensoniq AudioPCI ES1731 at 0xd000, irq 5
Audio devices
0: ES1371 DAC2/ADC (DUPLEX)
Synth devices: NOT ENABLED INCONFIG
Midi devices:
0: ES1371
Timers:
7: system timer
Mixers:
0: Cirrus Logic CS4297A rev A
I am at a loss??
--
Patrick Shanahan
Registered Linux User #207535
@ http://counter.li.org
I'm trying to install a new plextor cd burner (Plexwriter 16/10/40A CD-RW) on
my SuSE 8.0 system. I've followed the instructions in the support database
but haven't had success. The instructions - briefly outlined - are:
Switch off IDE support by changing the LILO configuration - add
hda=ide-scsi to the append option of the boot loader (hda is the correct drive
for my cd)
Load the scsi emulation by adding this line:
/sbin/modprobe ide-scsi
to the /etc/init.d/boot.local file.
Correct settings for all IDE CD drives:
ln -sf /dev/scd0 /dev/cdrecorder
I've also tried:
ln -sf /dev/sr0 /dev/cdrecorder
per suggestion from suse support
Add this line to fstab:
/dev/cdrecord /media/cdrecorder auto ro,noauto,user,exec 0 0
mkdir /media/cdrecorder
Reboot and the thing should work but when I run
cdrecord -scanbus
this is all I get:
Cdrecord 1.11a13 (i686-suse-linux) Copyright (C) 1995-2001 Jörg Schilling
Linux sg driver version: 3.1.22
Using libscg version 'schily-0.5'
scsibus0:
0,0,0 0) *
0,1,0 1) *
0,2,0 2) *
0,3,0 3) *
0,4,0 4) 'iomega ' 'jaz 2GB ' 'E.17' Removable Disk
0,5,0 5) *
0,6,0 6) *
0,7,0 7) *
which lists my real scsi drive (just the iomega) that are on my scsi adapter -
nothing about the ide cd-rw.
Can anyone see what I'm doing wrong? Thanks.
Geoff
I've just recently updated to Suse 8.0 Clean Install
alsa-0.9.0_cvs20020320-12. SBLive and RME9652
So far everything I've tried to record, I think, is being recorded faster than
being stated (16 bits 44100) or at least it is playing back at an accelerated
speed or differnt rate. Not "chipmunk" like but "Hey! Ease up on the coffee"
like.
Old recording and downloaded waves are played fine so I believe this to be a
recording issue. Ever heard/seen the likes before? Any ideas why? Or how
to adjust it. Audacity seems to work greater than great (never really had it
working prior to this) and I'm really liking it.
but when all you want is a quick audio reminder or such arecord is nice.
Thanks
--
Gary Counsellor
http://www.musician2000.com
sineigs.all.attitudes(a)eskimo.com
Please remove .all.attitudes before replying
I saw an article in LinuxFocus of April/MAY which is describing a solution to
use this digital camera under Linux.
Has or can SuSE bring out a patch or updated package for this camera for
gphoto for SuSE 8.0 ?
Many people use this camera now.
Patrick Op de Beeck
Antwerp Linux User Group