September 2003 - openSUSE Multimedia - openSUSE Mailing Lists

Darwin Streaming Server
by Michael Reynolds 15 Sep '03

15 Sep '03

Hello, I would like install Darwin Streaming Server (http://developer.apple.com/darwin/projects/streaming/faq.html) on SuSe Linux 8.2. Has anyone successfully done this? I just want to know if it's possible before I set up the box. Thanks! ---Mike + + + Michael Reynolds / SpinWeb Net Designs, Inc. http://www.spinweb.net / 765.284.0910 PGP Signed/Encrypted Email Preferred PGP key: http://michael.spinweb.net/pgp/public.asc + + + A computer without a Microsoft operating system is like a dog without bricks tied to its head.

1 0

Problems with Canon Powershot a70 digital camera
by Giulio F. 15 Sep '03

15 Sep '03

Hi, I have a Canon Powershot a70 digital camera on a Suse 8.2. I have installed the libgphoto2-2.1.2 source (that should support my camera) and installed but when I start gtkam I get two errors: Could not list folder in '/' Could not initialize camera And this is the output of the kernel in /var/log/messages linux kernel: usb.c: USB device 6 (vend/prod 0x4a9/0x3073) is not claimed by any active driver. What can I do? Can I activate some modules or add some configurations? Thankyou! Giulio F.

3 2

Ardour
by Kim Fredenberg 13 Sep '03

13 Sep '03

Hi everybody! I have a small problem. I've converted to Linux/Unix completely except for one thing, multitrack sound recordning. Now I found Ardour and it seems as it could replace the software I'm using in MS and would thus allow me to completely convert from Windows. Firstly I found out that Ardour is included in 8.1 but not in 8.2. (I'm running 8.2). Then I found Ardour for 8.2 at http://apt.bygden.nu/SuSE/8.2-i386/RPMS.suse-people/ which I installed. Everything went fine but when I try to run Ardour (after running jackd), it starts up but crashes after about 2 seconds giving the error message: ardour: relocation error: ardour: undefined symbol: jack_set_xrun_callback I googled for the error message but couldn't find almost any info about it. So now to my questions: 1. Does anyone have experience in running Ardour on 8.2? 2. Are there any other software that equals Ardour? kim

3 3

No sound output Fortissimo II
by Metod Kolla 12 Sep '03

12 Sep '03

> distro the sound works fine, but with SuSE 8.2 I had to change IRQ > number in YAST. Try keeping changing it until you hear the sample. > >Its on IRQ16 at the moment. I don't know how or can't see how to change > >IRQ in YaST either :-( Hi there, Since I don't use SuSE anymore, forgive me if my memory will fail me. Open the YaST, click on hardware. Select the audio card, you should see your card detected. Click on Change settings (or similar) and choose the advanced option. You get to the windows where you have the IRQ, DMA and other sound card config. Click the current IRQ setting and in little window bellow it will show the other IRQ numbers you can select yourself. Start by highest number, click SET and then click Next button. Next window appears where you can test your new setting. Repeat this until you hear sample. If you're successful, don't forget to save your new configuration. That's all I can help you with this. Metod

1 0

No sound output Fortissimo II
by Metod Kolla 10 Sep '03

10 Sep '03

Hi John, Reminds me a bit of my problem with soundcard under SuSE. Any other distro the sound works fine, but with SuSE 8.2 I had to change IRQ number in YAST. Try keeping changing it until you hear the sample. Hope this works for you. Metod

4 3

Sound
by Tomás Augusto Germano 09 Sep '03

09 Sep '03

Hi, I Have instaled Suse 8.2. I Have a preblem with my sound Card, the sound card it´s good reconiced by Yast2 and I can listen music but with a litle noise. This sound device is an "On Board Compliant whit AC´97 specification" and the Yast2 Interface show this information. I´m using KDE. Thanks. _________________________________ Tomas Augusto Germano Sistemas: Marval, O'Farrell & Mairal mailto:tag@marval.com.ar <mailto:tag@marval.com.ar> Tel:4310-0100 (1374) Directo:4310-0296 Fax:4310-0200 www.marval.com.ar <http://www.marval.com.ar/> --------------------------------------------------------------------- Este mensaje es confidencial. Puede contener informacion amparada por el secreto profesional. Si usted ha recibido este e-mail por error, por favor comuniquenoslo inmediatamente via e-mail y tenga la amabilidad de eliminarlo de su sistema; no debera copiar el mensaje ni divulgar su contenido a ninguna persona. Muchas gracias. This message is confidential. It may also contain information that is privileged or otherwise legally exempt from disclosure. If you have received it by mistake please let us know by e-mail immediately and delete it from your system; you should also not copy the message nor disclose its contents to anyone. Many thanks. ---------------------------------------------------------------------

2 1

Real One player for SuSE 8.2 Professional i386?
by Bob Pearson 09 Sep '03

09 Sep '03

I seem to recall there being a beta Real One player in 8.1. I cannot find a Real One player for Linux at www.real.com or anywhere else for that matter. Does any one know if it is available and if so where? Does anyone know if Mozilla (1.4 and later) are going to support the rtsp protocol? TIA. Regards, Bob Pearson -- I am unique and special, just like everyone else.

4 3

No sound output Fortissimo II
by John Willby 09 Sep '03

09 Sep '03

Hi I am using 8.2 and have no sound output from my fortissimo II. I have looked in my /etc/modules.conf and it seems to be setup ok althought there are a few entries in there that confuse me. I have the volume turned up and I know the card works under Linux as it was working a couple of days ago under Mandrake before I swopped over to SuSE. -- John Willby Registered Linux user number 321644 ICQ: 92791912 Jabber: vicarofwibley(a)jabber.org YIM: vicarofwibley Linux is like a wigwam - No Gates, no Windows, Apache inside. 7:10pm up 2:09, 3 users, load average: 0.04, 0.04, 0.00

1 0

DAT files
by kotendra nath lella 07 Sep '03

07 Sep '03

Hai, I am novice to SuSe linux.I want to know how to play video CD files and DAT files in this version of linux.what application should be used.I have used XINE.It's not working.giving some error message.Pls help me on this.guide me through FAQ's so that i can find solution for that. Thanks in advance Yours sincerely Kotendra Livin Vida Loca ( Live Life Dangerously) ___________________________________________________ Meet your old school or college friends from 1 Million + database... Click here to reunite www.batchmates.com/rediff.asp

3 2

New Microphone and WebCam
by Chris Pugh 03 Sep '03

03 Sep '03

This message and its contents are subject to the conditions set out at the end of this email ****************************************************************************** Hi, I am fairly new to all of this! I am trying to prove to various people that they can run an effective basic videoconferencing utility they can use linux and gnomemeeting. However, I am having problems with getting various bits set up. I have plugged my microphone in and the webcam. In YAST2 when I select HW info, it lists the correct USB Cam that I have, but I can't get xawtv to even start (it says /dev/video0 no such device). When I try a basic "rec -d /dev/dsp myfile.wav" it appears to record, but with no sound on playback. I have looked at volume control and the Mic is set up to rec. If I just speak into the mic without anything running, I can hear myself(!) I know this is a lot of queries, but if anyone can help..... Cheers, Chris. -- Cims (Wexham Office) Ext. 8690 Direct Line: +44 (0) 1753 828690 Fax: +44 (0) 1753 753321 Mobile: +44 (0) 7801 916406 Email: chris.pugh(a)cimsglobal.com =================================== ALWAYS ENCRYPT SENSITIVE INFORMATION ++++ For a copy of my public key send me a blank mail with the subject line "send public key". ++++ ******************************************************************************** Important: This e-mail and its attachments are intended for the above named only and may be confidential. If they have come to you in error you must take no action based on them, nor must you copy or show them to anyone. If you have received this communication in error please notify the Cims Helpdesk by e-mail, (Helpdesk(a)cimsglobal.com) or by telephone (+44 (0) 870 241 1234) and then delete the e-mail and any copies of it. Any Incoming or Outgoing email may be monitored by us. This communication is from Cims Limited, (company number 1008797) reg. office: Wexham Springs, Framewood Road, Wexham, Slough, UK, SL3 6PJ Telephone +44 (0) 1753 828 600 Fax +44 (0) 1753 662822 http://www.cimsglobal.com Although this e-mail and its attachments are believed to be free from any virus, it is the responsibility of the recipient to ensure that they are virus free. ********************************************************************************

2 1