December 2020 - openSUSE Build Service

Re: Please create OBS project hardware:FPGA
by Malcolm 18 Dec '20

18 Dec '20

On Fri 18 Dec 2020 09:30:06 AM CST, Mark Stopka wrote: >Hi all, could someone please create me a project hardware:FPGA >(capital if possible) for tools required for FPGA development and chip >design? > Hi Just an observation, the verilator and iverilog packages are already present (and in the openSUSE releases) and maintained in the electronics OBS project....? Perhaps you can check for other packages with osc se <package> and see if home project users eg cocotb might be interested in pushing to a development project and maintaining? -- Cheers Malcolm °¿° SUSE Knowledge Partner (Linux Counter #276890) Tumbleweed 20201216 | GNOME Shell 3.38.2 | 5.9.14-1-default Intel DQ77MK MB | Xeon E3-1245 V2 X8 @ 3.40 GHz | Intel/Nvidia up 11:40, 2 users, load average: 0.57, 0.48, 0.43

1 0

Lots of similiar time-out failures
by Detlef Steuer 15 Dec '20

15 Dec '20

In d:l:R:autoCRAN I face the situation that after a rebuild avalanche quite a few packages fail with getoldpackages: connect to back-other-opensuse:5253: Connection timed out (worker was build79:3) Seems it's always back-other-opensuse:5253, different builders. Triggering a rebuild fixes each of these packages, but using the webui is very tedius, i.e. this time 170 packages were left in this state. My question: Is it possible from the command line to trigger rebuilds for all timed-out packages? If not: Is it possible to trigger rebuilds for all failed packages? Normally there shouldn`t be many real fails, because packages only land in the repo if they build successfully on a local machine. I can write scripts to do this, but maybe any of the myriad of osc options already does it :-) Detlef

2 1

Setting prjconf Prefer: !go in a subproject to override inherited value
by Jeff Kowalczyk 14 Dec '20

14 Dec '20

I am trying to configure subproject prjconf to override inherited prjconf "Prefer: go" from the parent project. The objective is to have devel:languages:go:metapackage_provides exhibit the error: "unresolvable: have choice for go >= 1.14: go1.14 go1.15" Both go1.x and the go metapackage provide go, and the ability to trigger the error in any project will serve as a baseline for refactoring work. Setting prjconf "Prefer: -go" or "Prefer: !go" do not seem to have any effect, and the subproject project package hugo builds without the desired error. https://build.opensuse.org/project/show/devel:languages:go (Prefer: go) https://build.opensuse.org/project/show/devel:languages:go:metapackage_prov… (Prefer: !go) The behavior is identical in a home branch, where the parent has no prjconf Prefer: go: https://build.opensuse.org/project/show/home:jfkw:branches:devel:languages:… Are there other methods to enforce unsetting a prjconf value? Or to display the prjconf value in effect at build time? -- Jeff Kowalczyk Software Engineer, Go Developer Experience SUSE

2 1

Cannot delete built binaries from repository
by Sebix 10 Dec '20

10 Dec '20

Hi, I'm struggling to delete the file python3-python-dateutil-2.7.5-40.3.noarch.rpm from this repository: https://download.opensuse.org/repositories/home:/sebix:/intelmq/CentOS_8/no… and I'm asking for help. According to the docs, the command would be osc unpublish --repo CentOS_8 --all home:sebix:intelmq python3-python-dateutil which did not work, as well as the button in the Web UI. They only delete the binaries as visible at https://build.opensuse.org/package/binaries/home:sebix:intelmq/python3-pyth… I also tried already numerous different settings for the Publish-Flag of this package, as as well all the different combinations with rebuilds. No matter what I try, the rpm-file with the last modification date 24-Jun-2020 remains in the repository. I appreciate any hint what I could try next. best regards Sebastian

1 0

How to properly clean up the entire project ?
by Ren Lan 07 Dec '20

07 Dec '20

Hey Everyone, I used this cmd line to clean up my project with the entire packages. - "osc rdelete ProjectFoo -m cleanup" All traces have disappeared in that directory, like: /srv/obs/build. But On the other hand, there are always traces on: /srv/obs/sources.Which this takes up a lot of space in the long term. What is the exact way to delete things in that dir.(/srv/obs/sources)? And What's the best way to make up for other projects that already deleted in the past? # ls -al /srv/obs/sources/|wc -l 52336 Thank you very much, -ren

2 2

xUbuntu_20.10 x86_64 has no util-linux package
by Denis RAUX 07 Dec '20

07 Dec '20

Hi, I cannot chroot to xUbuntu_20.10 x86_64 : magix@opensuse:~/OBS/home:DenisRx:TeXmacs/TeXmacs> osc chroot xUbuntu_20.10 x86_64 chroot: failed to run command 'su': No such file or directory The chroot works on xUbuntu_20.10 i586. Regards, Denis

1 0

Issue building with obs_scm service for Tumbleweed on OBS
by Emily Roberts 04 Dec '20

04 Dec '20

Hey, I'm putting this out to see if anyone here knows how to resolve an issue I've been having with building this package: https://build.opensuse.org/package/show/devel:tools:scm/gh I use obs_scm to download the app source from GitHub, and then have it put into a tarball by the tar service at buildtime. I've gotten this to work on most platforms, but some including Tumbleweed x86_86 and i586 have missing dependencies for the obs_scm service for some reason. This build succeeds on the Tumbleweed ARM repos, but there are two specific python packages missing from the Tumbleweed buildfile preventing this from going forward. If anyone has any idea what's going on or if it can be fixed on the backend, it would be really appreciated! Thanks! - Emily (nopeinomicon)

1 0

Open Build Service (OBS) 2.10.8 released
by Saray Cabrera Padrón 04 Dec '20

04 Dec '20

OBS 2.10.8 released ================== This release fixes a XSS security issue, tracked in CVE-2020-8031. The leak exists in the WebUI comment functionality which can be misused to inject malicious JavaScript code. Updaters from any OBS 2.10.7 release can just upgrade the packages and restart all services. Updaters from former releases should read the README.UPDATERS file. OBS update are available from the following projects: https://build.opensuse.org/project/show/OBS:Server:2.10 The appliance can be downloaded from http://openbuildservice.org/download Details from the Release Notes of 2.10.8: ======================================== Bugfixes ======== * Frontend: - CVE-2020-8031: Potential Cross-Site Scripting in markdown rendering. -- Saray A. Cabrera Padrón | scabrerapadron(a)suse.de | scabrerapadron(a)suse.com Full Stack Web Developer - Open Build Service SUSE Linux GmbH, Maxfeldstr. 5, D-90409 Nürnberg Tel: +49-911-74053-0; Fax: +49-911-7417755; https://www.suse.com/ SUSE Linux GmbH, GF: Felix Imendörffer, Jane Smithard, Graham Norton, HRB 21284 (AG Nürnberg)

1 0

cannot build package locally with osc command and xUbuntu_20.10
by Denis RAUX 03 Dec '20

03 Dec '20

osc build cannot install packages for requested OBS repo example for i586 arch : Getting buildinfo from server and store to /home/magix/OBS/home:DenisRx:TeXmacs/Guile18/.osc/_buildinfo-xUbuntu_20.10-i586.xml buildinfo is broken... it says: unresolvable: nothing provides strace nothing provides lrzsz for x86_64 install packages stops after numerous errors like : [22/215] installing libnss-nis-3.1-0ubuntu4 [ 46s] dpkg: libnss-nis:amd64: dependency problems, but configuring anyway as you requested: [ 46s] libnss-nis:amd64 depends on libc6 (>= 2.14); however: [ 46s] Package libc6 is not installed. [ 46s] [23/215] installing libc6-2.32-0ubuntu3 [ 48s] dpkg: libc6:amd64: dependency problems, but configuring anyway as you requested: [ 48s] libc6:amd64 depends on libgcc-s1; however: [ 48s] Package libgcc-s1 is not installed. [ 48s] libc6:amd64 depends on libcrypt1 (>= 1:4.4.10-10ubuntu4); however: [ 48s] Package libcrypt1 is not installed. .......................................... s] [170/215] installing libpython3.8-minimal-3.8.6-1 [ 342s] [171/215] installing tex-common-6.15 [ 345s] /usr/sbin/update-updmap: line 166: getopt: command not found [ 345s] dpkg: error processing package tex-common (--install): [ 345s] installed tex-common package post-installation script subprocess returned error exit status 127 [ 345s] Processing triggers for man-db (2.9.3-2) ... [ 345s] Errors were encountered while processing: [ 345s] tex-common [ 345s] exit ... [ 345s] [ 345s] opensuse failed "build guile18.dsc" at Thu Dec 3 14:27:07 UTC 2020. [ 345s] I think libc is missing. I also notice than the repo links on Ubuntu:20.10 are http://ftp.halifax.rwth-aachen.de/ubuntu/groovy/main instead http://ftp.halifax.rwth-aachen.de/ubuntu/dists/groovy/main Regards

2 1

New blog post about revisiting the left side navigation
by Lukas Krause 03 Dec '20

03 Dec '20

Hey there, We revisited the action links in the left side navigation of the Open Build Service. Checkout our latest blog post for more details: https://openbuildservice.org/2020/12/03/revisit-actions-left-side-navigatio… Looking forward to hear your feedback! Your OBS Team -- Lukas Krause, Build Solutions SUSE Software Solutions Germany GmbH Maxfeldstr. 5 90409 Nürnberg Germany (HRB 36809, AG Nürnberg) Geschäftsführer: Felix Imendörffer

1 0