openSUSE Build Service September 2018

buildservice@lists.opensuse.org

28 participants
22 discussions

[opensuse-buildservice] Public Key not available SLE_12_SP3 s390x
by Usman Haider 27 Nov '19

27 Nov '19

Hi, I am new and trying local build on s390x with SLE_12_SP3 using the following command sudo osc build but I get the public key not available for many packages. You can see the output by clicking the following link https://pastebin.com/YBQk3vGe I know that I can use --noverify option to bypass this and builds complete successfully when I use --noverify option but how can I fix this? What will happen if I don't fix it? -- Usman -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-buildservice+owner(a)opensuse.org

4 9

[opensuse-buildservice] OBS Appliance - Unable to Update
by Khalil Graves 15 Apr '19

15 Apr '19

I am running OBS Appliance 2.8.2 on VMware ESX. When the appliance boots I get an error "Failed to start LSB: Finds the storage device to be used for OBS server and/or worker." I have included a dump of systemctl status obsstoagesetup.service below. I Just want to confirm if this is normal or should be addressed. I also attempted and update of a clone of my appliance via zypper but 2 GB root drive is not sufficient for upgrades. Update begins but end with "Error Code: Write Error". I checked root drive and it was up to 100% utilization from 93% prior to update. I decided to install latest version of OBS appliance over existing install. New appliance adopts my old setting but now I am getting and error on boot "Failed to start LSB: open build service source service server." In addition I am unable to build rpms in this current state. Not sure what to do next to get the cloned appliance to build a package. SYSTEMCTL status obsstoragesetup.service obsstoragesetup.service - LSB: Finds the storage device to be used for OBS server and/or worker Loaded: loaded (/etc/init.d/obsstoragesetup; bad; vendor preset: disabled) Active: failed (Result: exit-code) since Tue 2018-03-06 18:44:59 UTC; 16min ago Docs: man:systemd-sysv-generator(8) Process: 1365 ExecStart=/etc/init.d/obsstoragesetup start (code=exited, status=1/FAILURE) Mar 06 18:44:59 linux obsstoragesetup[1365]: OBS_SERVER_SIZE=38912 Mar 06 18:44:59 linux obsstoragesetup[1365]: TOTAL_SWAP_SIZE=1024 Mar 06 18:44:59 linux obsstoragesetup[1365]: FINAL_VG_SIZE = 12284 - 38912 - 25600 - 1024 Mar 06 18:44:59 linux obsstoragesetup[1365]: FINAL_VG_SIZE=-53252 Mar 06 18:44:59 linux obsstoragesetup[1365]: OBS_WORKER_ROOT_SIZE=-26626 Mar 06 18:44:59 linux obsstoragesetup[1365]: MIN_WORKER_ROOT_SIZE=4096 Mar 06 18:44:59 linux systemd[1]: obsstoragesetup.service: Control process exited, code=exited status=1 Mar 06 18:44:59 linux systemd[1]: Failed to start LSB: Finds the storage device to be used for OBS server and/or worker. Mar 06 18:44:59 linux systemd[1]: obsstoragesetup.service: Unit entered failed state. Mar 06 18:44:59 linux systemd[1]: obsstoragesetup.service: Failed with result 'exit-code'. SYSTEMCTL status obsservice.service obsservice.service - LSB: open build service source service server Loaded: loaded (/etc/init.d/obsservice; bad; vendor preset: disabled) Active: failed (Result: exit-code) since Fri 2018-03-09 11:59:39 UTC; 3min 34s ago Docs: man:systemd-sysv-generator(8) Process: 1761 ExecStart=/etc/init.d/obsservice start (code=exited, status=7) Mar 09 11:59:38 linux systemd[1]: Starting LSB: open build service source service server... Mar 09 11:59:39 linux startproc[1788]: startproc: exit status of parent of /usr/lib/obs/server/bs_service: 13 Mar 09 11:59:39 linux obsservice[1761]: Initializing obsservice..failed Mar 09 11:59:39 linux systemd[1]: obsservice.service: Control process exited, code=exited status=7 Mar 09 11:59:39 linux systemd[1]: Failed to start LSB: open build service source service server. Mar 09 11:59:39 linux systemd[1]: obsservice.service: Unit entered failed state. Mar 09 11:59:39 linux systemd[1]: obsservice.service: Failed with result 'exit-code'. '. -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-buildservice+owner(a)opensuse.org

2 4

[opensuse-buildservice] OBS + GitHub - deprecation of GitHub Services
by Linux Kamarada 19 Mar '19

19 Mar '19

Hello, guys! I searched how to integrate OBS with GitHub so that a git push would cause OBS to fetch the source code and build. I followed directions on these pages: https://openbuildservice.org/2013/11/22/source-update-via_token/ https://github.com/seccubus/obs_autobuild_test (CC their authors, thank you for the great material!) But when I opened GitHub's Integration & services to add the Obs service, I read this: "Note: [GitHub Services are being deprecated][1]. Please contact your integrator for more information on how to migrate or replace a service with [webhooks][2] or [GitHub Apps][3]." [1]: https://developer.github.com/changes/2018-04-25-github-services-deprecation/ [2]: https://developer.github.com/webhooks/ [3]: https://developer.github.com/apps/differences-between-apps/#about-github-ap… The news is from April 25, 2018. The first paragraph summarizes it: "GitHub plans on shutting down GitHub Services so we can shift focus to other areas of the API, such as strengthening GitHub Apps and GraphQL, and improving webhooks. The intention of GitHub Services was to allow third-party developers to submit code for integrating with their services, but this functionality has been superseded by GitHub Apps and webhooks. GitHub Services has not supported new features since April 25, 2016, and we plan to officially deprecate it on October 1st, 2018." Although I successfully integrated OBS with GitHub using a GitHub Service, is it already possible to do that same integration using GitHub Apps or webhooks? Thank you! Antonio The Linux Kamarada Project http://kamarada.github.io/ -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-buildservice+owner(a)opensuse.org

7 12

[opensuse-buildservice] Problem with GPG verification: nothing provides gpg-offline
by Bjoern Voigt 26 Sep '18

26 Sep '18

Currently the package "maildrop" from server:mail repository fails to build for many distributions, e.g. for Tumbleweed, Leap 42.3, Leap 15.0 and Factory. https://build.opensuse.org/package/show/server:mail/maildrop The error message is "nothing provides gpg-offline". The maildrop.spec file contains the following GPG related entries: %if 0%{?suse_version} >= 1230 BuildRequires: gpg-offline %endif [...] %prep %if 0%{?suse_version} >= 1230 %gpg_verify %{SOURCE1} %endif The macro %gpg_verify is unavailable (tested with Tumbleweed). What is currently the right way to verify GPG signatures of sources? What is a good example package for GPG verification? Greetings, Björn -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-buildservice+owner(a)opensuse.org

3 3

[opensuse-buildservice] openSUSE:Tools signkey update
by Adrian Schröter 25 Sep '18

25 Sep '18

Hi, I had to update the signature key of openSUSE:Tools project. Your installer will most likely complain. You can trust the keyid: 826659A9013E5B65 as documented in the project: https://build.opensuse.org/project/show/openSUSE:Tools adrian -- Adrian Schroeter email: adrian(a)suse.de SUSE Linux GmbH, GF: Felix Imendörffer, Jane Smithard, Graham Norton, HRB 21284 (AG Nürnberg) Maxfeldstraße 5 90409 Nürnberg Germany -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-buildservice+owner(a)opensuse.org

1 0

Re: [opensuse-buildservice] Strange Build failures on Buildservice
by Adrian Schröter 25 Sep '18

25 Sep '18

On Dienstag, 25. September 2018, 15:30:11 CEST wrote Michael Kuron: .. > > > Adrian, any idea on the i586 issue > > Try to reproduce it local and maybe attach strace. > > Again, I failed to reproduce it locally in a Docker container, but > haven't tried building via osc yet. If we could reproduce these issues > outside of the automated builds, we could probable debug and fix them > quite easily. the main difference to the container would be that you get a full VM without network (except localhost). You can jump inside during build anyway via a telnet server: osc build --vm-type=kvm --vm-telnet=$PORT -x telnet-server -x net-tools or alike. So you run also the original distro kernel of your base. If you still can not reproduce it, it can be hardware specific or memory / cpu resource specific. Did you check the attemps, if there are maybe some random success on some workers? You may get a pattern .... (osc jobhistory) -- Adrian Schroeter email: adrian(a)suse.de SUSE Linux GmbH, GF: Felix Imendörffer, Jane Smithard, Graham Norton, HRB 21284 (AG Nürnberg) Maxfeldstraße 5 90409 Nürnberg Germany -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-buildservice+owner(a)opensuse.org

1 0

[opensuse-buildservice] Strange Build failures on Buildservice
by Christoph Junghans 25 Sep '18

25 Sep '18

Hi guys, Michael and I are trying to update the espresso package in OpenSuse: https://build.opensuse.org/package/show/home:cjunghans:branches:devel:langu… We tracked all issues here: https://github.com/espressomd/espresso/issues/2258 But now we are left with 2 issues, which hard to solve outside of the Build service VMs: 1.) Segfault on openSUSE_Factory_ARM armv7l Details: https://github.com/espressomd/espresso/issues/2258#issuecomment-420988560 Michael's attempt so far: https://github.com/espressomd/espresso/issues/2258#issuecomment-421710470 Cannot be reproduced! 2.) Build on openSUSE_Tumbleweed i586 is super slow and runs out of time. Additionally there are 2 minor infrastructure issues: 1.) On openSUSE_Tumbleweed x86_64, -grecord-gcc-switches is missing so we get hundreds of warnings like: W: python-espressomd no-rpm-opt-flags All non-Tumbleweed builds don't have that warning 2.) On SLE_12_SP4 x86_64, we cannot install the openmpi-devel package anymore, error: File /usr/lib64/mpi/gcc/openmpi/lib64/mpi.mod conflicts between attempted installs of openmpi-devel-1.10.7-1.15.x86_64 and openmpi-compat-1.8.1-3.1.x86_64 Any help on the first two issues would be appreciated. Cheers, Christoph -- Christoph Junghans Web: http://www.compphys.de -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-buildservice+owner(a)opensuse.org

2 4

[opensuse-buildservice] Error 500
by Andreas Schwab 24 Sep '18

24 Sep '18

https://build.opensuse.org/project/staging_projects/openSUSE:Factory/C gives an Internal Server Error. Andreas. -- Andreas Schwab, SUSE Labs, schwab(a)suse.de GPG Key fingerprint = 0196 BAD8 1CE9 1970 F4BE 1748 E4D4 88E3 0EEA B9D7 "And now for something completely different." -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-buildservice+owner(a)opensuse.org

3 6

[opensuse-buildservice] How to enforce specific system library for a specific package
by Dr. Werner Fink 20 Sep '18

20 Sep '18

Hi, I'm currently build bash 5.0 beta as well as readline 8.0 beta. As readline does build local with osc as well as on the OBS and also bash with --prefer-pkgs $PWD/binaries where the readline package are stored ... but the build on the OBS results in nothing provides readline-devel = 8.0 is there any way in prjconf of the repository shell to enforce that the package readline-devel with version 8.0 will be installed but oly for the pacakge bash with version 5.0 Werner -- "Having a smoking section in a restaurant is like having a peeing section in a swimming pool." -- Edward Burr

2 2

[opensuse-buildservice] KDE:Frameworks5 versus KDE:Unstable:Frameworks5
by Mathias Homann 17 Sep '18

17 Sep '18

Hi, could we PLEASE have all the beta versions ONLY in K:U:F, and leave K:F in an actual usable state for the people who actually use the OBS repos to have an unsable system? From what it looks like to me right now the latest plasma beta is actually maintained in K:F and just copied over to K:U:F... thank you for your consideration. Mthias

1 1

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

openSUSE Build Service September 2018