August 2018 - openSUSE Build Service - openSUSE Mailing Lists

[opensuse-buildservice] nodejs10 build failures
by Hans-Peter Jansen 22 Aug '18

22 Aug '18

Hi, today, I stumbled across strange build failures of nodejs10: https://build.opensuse.org/package/show/devel:languages:nodejs/nodejs10 Most failed builds stopped at some point during install without further indication why exactly. It looks like some watchdog is chiming in and stopping the builder. Are there some _constraints missing? 40G disk seems more than enough to me, even if additional intree packages are being built. Any idea, what's going on here? Cheers, Pete -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-buildservice+owner(a)opensuse.org

2 4

[opensuse-buildservice] openSUSE Factory ARM: Wayland woes
by BJH2017 21 Aug '18

21 Aug '18

Hi, Unfortunately, my openSUSE Factory ARM Vim build target (https://build.opensuse.org/package/show/home:fusion809/vim-suse#) has an 'Unresolvable' status due to: nothing provides libwayland-egl1 = 1.15.0 needed by wayland-devel . This issue occurs for both armv7l and aarch64 architectures. So a fix for this issue would be much appreciated. Thanks for your time, Brenton -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-buildservice+owner(a)opensuse.org

1 0

[opensuse-buildservice] Doxygen badness error
by Usman Haider 19 Aug '18

19 Aug '18

Hi, I am building doxygen for opensuse 12 backports (s390x) and I am getting this error E: SUSE-Backports-policy-SLE-conflict (Badness: 10000) Package with name doxygen already in SLE I cannot find doxygen at package hub and openSUSE:Backports:SLE-12. Is it really available or it is some kind of bug? Regards, Usman -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-buildservice+owner(a)opensuse.org

2 2

[opensuse-buildservice] openSUSE Factory ARM builds of Vim are unresolvable due to two separate issues
by BJH2017 19 Aug '18

19 Aug '18

Hi, My openSUSE Factory ARM builds of Vim (https://build.opensuse.org/package/show/home:fusion809/vim-suse) are "unresolvable", for armv7l it is due to: missing pre/vminstalls: kernel-obs-build . My project config (https://build.opensuse.org/project/prjconf/home:fusion809) does not mention kernel-obs-build, so it's not an error due to my settings. While for aarch64 it is due to: nothing provides rpm-config-SUSE needed by rpm This seems like an issue with the snapshot of the ARM factory repos being used. Thanks for your time, Brenton -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-buildservice+owner(a)opensuse.org

1 1

[opensuse-buildservice] Trying to build OpenRA for Mageia 6: failed to dlopen /usr/lib64/rpm-plugins/systemd_inhibit.so libdbus-1.so.3: cannot open shared object file
by BJH2017 18 Aug '18

18 Aug '18

Hi, I've been trying to build a bleeding-edge OpenRA package for Mageia 6, but unfortunately I'm getting the build error: [ 8s] cycle: perl-libintl-perl -> texinfo [ 8s] breaking dependency texinfo -> perl-libintl-perl [ 8s] done [ 8s] querying package ids... [ 9s] [1/341] installing augeas-lenses-1.8.0-1.mga6 [ 9s] error: Failed to dlopen /usr/lib64/rpm-plugins/systemd_inhibit.so libdbus-1.so.3: cannot open shared object file: No such file or directory [ 9s] error: error reading from file .init_b_cache/augeas-lenses.rpm [ 9s] exit ... [ 9s] [ 9s] fusion809-ot-pc failed "build openra-bleed.spec" at Sat Aug 18 17:16:09 UTC 2018. [ 9s] full log, if needed is here: https://gist.github.com/7e2c94da7df2924b160400d77f012b5c. augeas-lenses isn't a package I build so I think the issue is with the snapshot of the Mageia 6 repos used by the OBS, but you's know more about this than me so I'll let you reach your own conclusions, all I care about is fixing this. Thanks for your time, Brenton -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-buildservice+owner(a)opensuse.org

1 0

[opensuse-buildservice] conflict for providers of system-release(30) needed by fedora-repos, (provider fedora-release is in conflict with generic-release)
by BJH2017 18 Aug '18

18 Aug '18

Hi, All three of my Rawhide builds are now unresolvable, with the message (https://build.opensuse.org/project/monitor/home:fusion809?arch_x86_64=1&def…) conflict for providers of system-release(30) needed by fedora-repos, (provider fedora-release is in conflict with generic-release) . So the python3-rpm-generators conflicts with python-rpm-macros unresolvable message is gone, at least. Thanks for your time, Brenton -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-buildservice+owner(a)opensuse.org

1 1

[opensuse-buildservice] Fedora Rawhide build of Vim unresolvable: python3-rpm-generators conflicts with python-rpm-macros
by BJH2017 17 Aug '18

17 Aug '18

Hi, My Fedora Rawhide build of Vim (I think URLs are forbidden so go to home:fusion809/vim-redhat package on the openSUSE Build Service public instance) has the status "Unresolvable" due to a conflict between python3-rpm-generators and python-rpm-macros. I recall asking about this in the IRC channel but I was focused on fixing a Cauldron issue at the time so I forget what I was told about Rawhide and I think email is the way to go as it's better documented. My package doesn't depend on python3-rpm-generators or python-rpm-macros, at least not explicitly. Thanks for your time, Brenton -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-buildservice+owner(a)opensuse.org

1 0

[opensuse-buildservice] splitdebug configuration
by Morschhäuser, Mark 17 Aug '18

17 Aug '18

Hello, I don't understand how to configure the splitdebug feature. It says " Repotype: TYPE[:OPTIONS] Defines the repository format for published repositories. Valid values are: none, rpm-md, suse, debian, hdlist2, arch, staticlinks. The OPTIONS parameter depends on the repository type, for rpm-md the known options are 'legacy' to create the old rpm-md format, 'deltainfo' or 'prestodelta' to create delta rpm packages, 'rsyncable' to use rsyncable gzip compression. To split the debug packages in an own published repository the option splitdebug:REPOSITORY_SUFFIX can be used." I want OBS to store all debuginfo packages in a separate directory and used ---- Repotype: rpm-md:splitdebug:debug ---- in my project config but all debuginfo packages are stored in the x86_64 directory where the other packages are and the debug directory is not created. How can I do this? Best regards, Mark -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-buildservice+owner(a)opensuse.org

2 1

[opensuse-buildservice] nice: permission Denied
by Mathias Radtke 16 Aug '18

16 Aug '18

Hi, currently I am setting up another ARM worker on our local instance. RPi3 and BananaPi M2 Ultra are working fine on Debian9. Right now I am trying to run an obsworker on an odroid-xu4 running with debian9. Obsworker starts but when open the screen session I see. nice: './bs_worker': Permission denied What needs to be done to make it run or where to look at? Cheers Mathias -- Mathias Radtke --- http://uib.de/de/support-schulung/schulung/ uib gmbh Bonifaziusplatz 1B 55118 Mainz Tel. 06131 / 27561-16 <phone:+49 61312756116> Fax 06131 / 27561-22 <phone:+49 61312756122> E-Mail: m.radtke(a)uib.de Internet: www.uib.de Geschäftsführer: dr. detlef oertel & erol ueluekmen Handelsregister: Amtsgericht Mainz HRB 6942 -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-buildservice+owner(a)opensuse.org

2 3

[opensuse-buildservice] OBS sprint report 44
by Christian Bruckmayer 15 Aug '18

15 Aug '18

Hello everyone, we just released the latest sprint report of the OBS team. Some highlights include: * Releasing of MS Azure Cloud uploads from OBS * Automated package builds for pull requests to the OBS project on GitHub * Continuing of the frontend migration to bootstrap Read on here if you want to know more: https://openbuildservice.org/2018/08/15/sprint-report-44/ Christian -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-buildservice+owner(a)opensuse.org

1 0