March 2014 - openSUSE Build Service - openSUSE Mailing Lists

Re: [opensuse-buildservice] Strange build error
by Matthew 20 Mar '14

20 Mar '14

On Thu Mar 20 05:30:14 CDT 2014, Marcus Meissner <meissner(a)suse.de> wrote: > On Thu, Mar 20, 2014 at 05:27:03AM -0500, Matthew wrote: >> >> >> >> >> On Thu Mar 20 01:40:35 CDT 2014, Marcus Meissner >> <meissner(a)suse.de> wrote: >> >> > On Thu, Mar 20, 2014 at 12:00:17AM +0100, Matthew Cattell >> wrote: >> >> Hi, >> >> >> I've been struggling to figure out why my package builds >> fine >> and then enters into an "unresolvable" state after >> generating >> the package and package repo. Hovering over the >> "unresolvable" >> status link shows that "nothing provides >> libcrypto.so.10 needed >> by openldap". This is really puzzling >> since I have no openldap >> dependency nor any so.10 library. >> Building locally works >> correctly and I'm able to install the >> rpm and see the libraries >> installed in the correct location. >> >> >> The package is here: >> >> https://build.opensuse.org/package/show/home:mcattell:cfengine-community/op… >> >> >> What could the problem be? >> > > You are building an incompatible version of openssl. >> > > You should not need to build openssl at all. >> > > Why do you not use the distribution supplied version? >> > > Ciao, Marcus >> > I wanted that specific version because it's what my project >> requires. I was curious as to why it built, generated the >> packages and then went to the "unresolvable" status with a list >> of dependencies that I don't believe are required by OpenSSL. >> Since I removed all the other packages from my project and built >> OpenSSL in isolation, I was surprised I still had the problem >> since there's nothing depending on my OpenSSL package anymore. > > Your build will replace the system included openssl package with > a one > containing a different major version, so libssh2 and so will not > find > this dependency anymore. > > (libssh2 here bein in the system needed for tzhe build.) > > Ciao, Marcus > Ah, OK. Is there a way to avoid this (other than a private instance of OBS) :-)

2 1

[opensuse-buildservice] armbuild13 broken again
by Guillaume Gardet 20 Mar '14

20 Mar '14

Hi Dirk, armbuild13 is broken again. Could you fix it, or at least disable it, please? Guillaume -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-buildservice+owner(a)opensuse.org

1 0

Re: [opensuse-buildservice] Strange build error
by Matthew 20 Mar '14

20 Mar '14

On Thu Mar 20 01:40:35 CDT 2014, Marcus Meissner <meissner(a)suse.de> wrote: > On Thu, Mar 20, 2014 at 12:00:17AM +0100, Matthew Cattell wrote: >> Hi, >> >> I've been struggling to figure out why my package builds fine >> and then enters into an "unresolvable" state after generating >> the package and package repo. Hovering over the "unresolvable" >> status link shows that "nothing provides libcrypto.so.10 needed >> by openldap". This is really puzzling since I have no openldap >> dependency nor any so.10 library. Building locally works >> correctly and I'm able to install the rpm and see the libraries >> installed in the correct location. >> >> The package is here: >> https://build.opensuse.org/package/show/home:mcattell:cfengine-community/op… >> >> What could the problem be? > > You are building an incompatible version of openssl. > > You should not need to build openssl at all. > > Why do you not use the distribution supplied version? > > Ciao, Marcus > I wanted that specific version because it's what my project requires. I was curious as to why it built, generated the packages and then went to the "unresolvable" status with a list of dependencies that I don't believe are required by OpenSSL. Since I removed all the other packages from my project and built OpenSSL in isolation, I was surprised I still had the problem since there's nothing depending on my OpenSSL package anymore. Thanks, Matthew

2 1

[opensuse-buildservice] Strange build error
by Matthew Cattell 20 Mar '14

20 Mar '14

Hi, I've been struggling to figure out why my package builds fine and then enters into an "unresolvable" state after generating the package and package repo. Hovering over the "unresolvable" status link shows that "nothing provides libcrypto.so.10 needed by openldap". This is really puzzling since I have no openldap dependency nor any so.10 library. Building locally works correctly and I'm able to install the rpm and see the libraries installed in the correct location. The package is here: https://build.opensuse.org/package/show/home:mcattell:cfengine-community/op… What could the problem be? -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-buildservice+owner(a)opensuse.org

2 1

[opensuse-buildservice] Strange build failures
by Hans-Peter Jansen 19 Mar '14

19 Mar '14

Hi, I wonder, what's wrong with: https://build.opensuse.org/build/home:frispete:tools/openSUSE_12.3/x86_64/d… I'm not able to spot the problem, although suffering from the same issue for local and remote builds. Puzzled, Pete -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-buildservice+owner(a)opensuse.org

1 1

Re: [opensuse-buildservice] Depending on a package in the same project
by Matthew Cattell 19 Mar '14

19 Mar '14

On 19/03/14 04:54, Dmitriy Perlow wrote: > Matthew Cattell <mcattell(a)spamarrest.com> Wed, 19 Mar 2014 02:19:41 > +0300: > >> Hi, >> >> I have created a new project with two subprojects. One of the sub >> projects requires the other sub project as a build dependency. >> >> I've used BuildRequires : lmdb > > lmdb-devel may be if it was packaged fine. > >> lmdb exists and has built successfully for the target repository in >> my home project. >> >> The build of core fails because it cannot find the dependency lmdb. >> >> There is a package already with the same name in a different project >> but the build fails for the target architecture - how to I make my >> package prefer the (successfully built) dependency in my home project? >> >> Thanks >> >> Matthew > > That did the trick - thankyou! -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-buildservice+owner(a)opensuse.org

1 0

[opensuse-buildservice] github token trigger broken
by Damian Ivanov 19 Mar '14

19 Mar '14

Hi all, manually starting token works like: osc token --trigger "FZm9JIy0faPmE5iSfGN2uhbAyD/eGbapD+5KO5+u" Trigger token <status code="ok" /> ==> package rebuilds successfully Registered and set active on github (pushed changes) and also used "Test Hook" ==> no result br, Damian -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-buildservice+owner(a)opensuse.org

3 6

[opensuse-buildservice] Depending on a package in the same project
by Matthew Cattell 19 Mar '14

19 Mar '14

Hi, I have created a new project with two subprojects. One of the sub projects requires the other sub project as a build dependency. I've used BuildRequires : lmdb lmdb exists and has built successfully for the target repository in my home project. The build of core fails because it cannot find the dependency lmdb. There is a package already with the same name in a different project but the build fails for the target architecture - how to I make my package prefer the (successfully built) dependency in my home project? Thanks Matthew -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-buildservice+owner(a)opensuse.org

2 1

[opensuse-buildservice] Open Build Service 2.5 Release Candidate
by Adrian Schröter 17 Mar '14

17 Mar '14

Open Build Service 2.5 Release Candidate is out there. It is tagged as version 2.4.98 and everything except the version number is considered to be final. As usual, you can find the appliances or packages in the now stable OBS:Server:2.5 project: http://download.opensuse.org/repositories/OBS:/Server:/2.5/images/ Users of former OBS 2.5 development releases should update as fast as possible since it is also closing a security hole (which does not exist in 2.4 or before). Please find the full 2.5 release notes inside the packages or online here: https://github.com/openSUSE/open-build-service/blob/2.5/ReleaseNotes-2.5 -- Adrian Schroeter email: adrian(a)suse.de SUSE LINUX GmbH, GF: Jeff Hawn, Jennifer Guild, Felix Imendörffer, HRB 21284 (AG Nürnberg) Maxfeldstraße 5 90409 Nürnberg Germany -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-buildservice+owner(a)opensuse.org

2 5

[opensuse-buildservice] local osc build with lxc
by Matwey V. Kornilov 17 Mar '14

17 Mar '14

Hi, I am tring to run osc build locally using lxc as VM. I am getting the following and have no idea how to fix that: [ 77s] brp-extract-appdata-2012.02.13-21.1 ######################################## [ 77s] build-mkbaselibs-20140220-1.2 ######################################## [ 78s] removing nis flags from //etc/nsswitch.conf... [ 78s] now finalizing build dir... [ 78s] /usr/sbin/Check is obsolete, don't call it! [ 79s] su: System error [ 79s] Error: TOPDIR empty The buildroot was: /var/tmp/build-root/openSUSE_Factory-i586 My osc version is 0.142 -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-buildservice+owner(a)opensuse.org

2 1

[opensuse-buildservice] debian transformer
by Volker Kohaupt 16 Mar '14

16 Mar '14

I want build debian and Ubuntu packages https://build.opensuse.org/package/show/home:vkohaupt/vokoscreen1 The debian transformer says: [..] [ 120s] running debian transformer... [ 121s] dpkg-source: warning: extracting unsigned source package (/usr/src/packages/SOURCES.DEB/vokoscreen_1.9.11.dsc) [ 121s] dpkg-source: info: extracting vokoscreen in /usr/src/packages/BUILD [ 121s] dpkg-source: error: unrecognized file for a native source package: vokoscreen_1.9.11.orig.tar.gz [..] I added a vokoscreen_1.9.11.orig.tar.gz package but the debian transformer say. [..] [ 60s] running debian transformer... [ 60s] package contains more than one tar file: vokoscreen-1.9.11.tar.gz vokoscreen_1.9.11.orig.tar.gz [ 60s] debian transforming failed. [..] What must i do? Thanks in advance! -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-buildservice+owner(a)opensuse.org

1 0

[opensuse-buildservice] big crime single files ?
by Damian Ivanov 15 Mar '14

15 Mar '14

Hi all, I wanted to ask if instead of a tar.gz/compressed source + .spec file for a package build if I use the .spec file + 2 Headers,2sources and a .pro file (uncompressed source) would this be bad? I'd like to do so because I would already have some basic revision control + webeditor for small changes like typos or something. Thanks in advance! Damian -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-buildservice+owner(a)opensuse.org

2 2

[opensuse-buildservice] osc commit error
by Kyrill Detinov 14 Mar '14

14 Mar '14

Hello. I got an error uploading content to the OBS. % osc ci -m "remove unneeded buildrequirement" Traceback (most recent call last): File "/usr/bin/osc", line 26, in <module> r = babysitter.run(osccli) File "/usr/lib/python2.7/site-packages/osc/babysitter.py", line 60, in run return prg.main(argv) File "/usr/lib/python2.7/site-packages/osc/cmdln.py", line 343, in main return self.cmd(args) File "/usr/lib/python2.7/site-packages/osc/cmdln.py", line 366, in cmd retval = self.onecmd(argv) File "/usr/lib/python2.7/site-packages/osc/cmdln.py", line 484, in onecmd return self._dispatch_cmd(handler, argv) File "/usr/lib/python2.7/site-packages/osc/cmdln.py", line 1214, in _dispatch_cmd return handler(argv[0], opts, *args) File "/usr/lib/python2.7/site-packages/osc/commandline.py", line 4382, in do_commit if any(pac.is_link_to_different_project() for pac in pacs): File "/usr/lib/python2.7/site-packages/osc/commandline.py", line 4382, in <genexpr> if any(pac.is_link_to_different_project() for pac in pacs): File "/usr/lib/python2.7/site-packages/osc/core.py", line 1568, in is_link_to_different_project orgprj = self.get_local_origin_project() File "/usr/lib/python2.7/site-packages/osc/core.py", line 1563, in get_local_origin_project root = ET.fromstring(self.get_local_meta()) File "<string>", line 124, in XML TypeError: must be string or read-only buffer, not None % rpm -q osc osc-0.144.1-128.1.noarch Installed from openSUSE:Tools. openSUSE Factory, x86_64. -- WBR Kyrill

2 1

[opensuse-buildservice] Problem creating a maintenance project for ligthdm
by Guido Berhoerster 14 Mar '14

14 Mar '14

Hi, I need to create a maintenance update for lightdm but I am unable to mbranch: $ osc mbranch lightdm BuildService API error: broken link in openSUSE:Maintenance:2120/lightdm.openSUSE_13.1_Update: conflict in file lightdm.spec ALso it seems that X11:Utilities/lightdm is not a link to openSUSE:Factory as it should be. Can somebody please fix this? Thanks, -- Guido Berhoerster -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-buildservice+owner(a)opensuse.org

2 1

Re: [opensuse-buildservice] package rebuild is not triggered by dependent package rebuilt
by Adrian Schröter 13 Mar '14

13 Mar '14

On Freitag, 14. März 2014, 00:49:01 wrote UkJung Kim: > 2014. 3. 13. 오후 4:45에 "Adrian Schröter" <adrian(a)suse.de>님이 작성: > > > > On Donnerstag, 13. März 2014, 13:50:01 wrote ukjung.kim(a)gmail.com: > > > I have some packages in my home obs project > > > https://build.opensuse.org/project/show/home:nereusuj:rebuild-test > > > > > > The package build dependency is as following. > > > > > > build-info <- product-features <- liba-devel-meta, libb-devel-meta <- c > > > > > > And obs project conf has a macro to control rpm macros. > > > > > > Macros: > > > %build_project_name m_1 > > > #build_project_name m_2 > > > :Macros > > > > > > What I expected is that product-features and other related packages > would be > > > triggered rebuilt If I changed macro in project conf and rebuild > build-info > > > package. > > > The results is that build-info package build result had changed but > other > > > packages were not rebuilt. > > > > build triggering does happen only when sources changed, rpms changed or > dependencies > > changed. > > > > as long, as you just change macros it will not happen. > > > > the scheduler has basically no idea which packages will be affected > (because > > the change can not only happen in spec files, but also inside the source > of > > a package). > > > > You basically need to rebuild your package/project manually here. > > > The build-info rpm has changed because I changed macro in project conf and > it changes build script behavior. Isn't it enough to trigger rebuild > product-features rpm because it dependes on build-info rpm? yes, as long as it is tracked as required package. you can check this via "osc buildinfo" call. It must not be a "supported" package, changes there get ignored. > If I changed build-info source itself, it triggers rebuild product-features > rpm and other related rpms. > > > Do you have any idea regarding it? > > > I need your help. > > > > > > > > > > -- > > > > Adrian Schroeter > > email: adrian(a)suse.de > > > > SUSE LINUX GmbH, GF: Jeff Hawn, Jennifer Guild, Felix Imendörffer, HRB > 21284 (AG Nürnberg) > > Maxfeldstraße 5 > > 90409 Nürnberg > > Germany > > > > > > -- Adrian Schroeter email: adrian(a)suse.de SUSE LINUX GmbH, GF: Jeff Hawn, Jennifer Guild, Felix Imendörffer, HRB 21284 (AG Nürnberg) Maxfeldstraße 5 90409 Nürnberg Germany -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-buildservice+owner(a)opensuse.org

1 0

[opensuse-buildservice] linking with X11 in OBS
by Roger Oberholtzer 13 Mar '14

13 Mar '14

Hi, I am trying to compile a Tcl/Tk extension that uses X11. I can successfully compile it on my local machine (direct - not in a local OBS) and it compiles just fine. I use the same commands I see in the OBS log. Oddly, when the application is being linked in OBS, it complains about some missing functions that I really think should be resolved. Especially since the same command works on my system. For example: gcc -DPACKAGE_NAME=\"TkXext\" -DPACKAGE_TARNAME=\"tkxext\" - DPACKAGE_VERSION=\"3.6.13\" -DPACKAGE_STRING=\"TkXext\ 3.6.13\" - DPACKAGE_BUGREPORT=\"\" -DPACKAGE_URL=\"\" -DBUILD_TkXext=/\*\*/ - DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 - DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1 -DHAVE_INTTYPES_H=1 - DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -DHAVE_LIMITS_H=1 -DHAVE_SYS_PARAM_H=1 - DUSE_THREAD_ALLOC=1 -D_REENTRANT=1 -D_THREAD_SAFE=1 -DTCL_THREADS=1 - DMODULE_SCOPE=extern\ __attribute__$\(__visibility__\(\"hidden\"$\)\) - DHAVE_NO_SEH=1 -DEXCEPTION_DISPOSITION=int -DHAVE_CAST_TO_UNION=1 - D_LARGEFILE64_SOURCE=1 -DTCL_WIDE_INT_TYPE=long\ long -DHAVE_STRUCT_STAT64=1 - DHAVE_OPEN64=1 -DHAVE_LSEEK64=1 -DHAVE_TYPE_OFF64_T=1 -DUSE_TCL_STUBS=1 - DUSE_TK_STUBS=1 -DPIC -I"/usr/include" -I"/usr/include" -pipe -O2 -fomit- frame-pointer -DNDEBUG -Wall -fPIC -lX11 -L/usr/lib -ltclstub8.5 -L/usr/lib -ltkstub8.5 -lXext -lXtst `echo ./unix/TkXext.record.c` -o txerecord [ 74s] ./unix/TkXext.record.c: In function 'main': [ 74s] ./unix/TkXext.record.c:131:9: warning: variable 'w' set but not used [-Wunused-but-set-variable] [ 74s] /tmp/ccofzMaU.o: In function `.L30': [ 74s] TkXext.record.c:(.text+0x26a): undefined reference to `XkbKeycodeToKeysym' [ 74s] /tmp/ccofzMaU.o: In function `.L27': [ 74s] TkXext.record.c:(.text+0x289): undefined reference to `XRecordFreeData' [ 74s] /tmp/ccofzMaU.o: In function `main': [ 74s] TkXext.record.c:(.text.startup+0x3a): undefined reference to `XOpenDisplay' [ 74s] TkXext.record.c:(.text.startup+0x54): undefined reference to `XSynchronize' [ 74s] TkXext.record.c:(.text.startup+0x6c): undefined reference to `XRecordQueryVersion' [ 74s] TkXext.record.c:(.text.startup+0x79): undefined reference to `XRecordAllocRange' [ 74s] TkXext.record.c:(.text.startup+0xbd): undefined reference to `XRecordCreateContext' [ 74s] TkXext.record.c:(.text.startup+0xcd): undefined reference to `XOpenDisplay' [ 74s] TkXext.record.c:(.text.startup+0xdb): undefined reference to `XFlush' [ 74s] TkXext.record.c:(.text.startup+0xe3): undefined reference to `XFlush' [ 74s] TkXext.record.c:(.text.startup+0x101): undefined reference to `XRecordEnableContext' Shouldn't XOpenDisplay and the others have been resolved by -lX11 My spec file says: BuildRequires: xorg-x11-devel tcl tcl-devel tk-devel libXext-devel which I would think would cover it. I am not getting a message that a library cannot be found. It you are curious, the extension is: https://build.opensuse.org/package/show/home:rogeroberholtzer/TkXext -- Yours sincerely, Roger Oberholtzer Ramböll RST / Systems Office: Int +46 10-615 60 20 Mobile: Int +46 70-815 1696 roger.oberholtzer(a)ramboll.se ________________________________________ Ramböll Sverige AB Krukmakargatan 21 P.O. Box 17009 SE-104 62 Stockholm, Sweden www.rambollrst.se -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-buildservice+owner(a)opensuse.org

5 16

[opensuse-buildservice] package rebuild is not triggered by dependent package rebuilt
by ukjung.kim＠gmail.com 13 Mar '14

13 Mar '14

I have some packages in my home obs project https://build.opensuse.org/project/show/home:nereusuj:rebuild-test The package build dependency is as following. build-info <- product-features <- liba-devel-meta, libb-devel-meta <- c And obs project conf has a macro to control rpm macros. Macros: %build_project_name m_1 #build_project_name m_2 :Macros What I expected is that product-features and other related packages would be triggered rebuilt If I changed macro in project conf and rebuild build-info package. The results is that build-info package build result had changed but other packages were not rebuilt. Do you have any idea regarding it? I need your help. -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-buildservice+owner(a)opensuse.org

2 1

[opensuse-buildservice] EXE package format
by Jan Engelhardt 11 Mar '14

11 Mar '14

At the end of the https://en.opensuse.org/openSUSE:Build_Service_comparison wiki page is a comparison of build infrastructures, and in the column "package format", OBS is said to support - even if only experimentally - the "exe" package format. A grep for zip\b or exe\b in the files of build.rpm does not yield any hint towards zip/exe generation, so where exactly may I find it? Having the actual program .exe in an .rpm is not too useful for Windows users… (but using mingw works really well otherwise!). -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-buildservice+owner(a)opensuse.org

3 19

[opensuse-buildservice] AttributeError: HTTPConnection instance has no attribute '_orig_stdout'
by Andreas Schwab 11 Mar '14

11 Mar '14

$ rpm -q osc osc-0.144.1-127.1.noarch $ osc -H ls -- GET https://api.opensuse.org/source send: 'GET https://api.opensuse.org/source HTTP/1.1\r\nAccept-Encoding: identity\r\nHost: api.opensuse.org\r\nConnection: close\r\nUser-agent: osc/0.144\r\n\r\n' reply: 'HTTP/1.1 401 Authorization Required\r\n' header: Date: Thu, 06 Mar 2014 18:29:07 GMT header: Server: Apache/2.2.12 (Linux/SUSE) header: WWW-Authenticate: Basic realm="Use your novell account" header: Vary: accept-language,accept-charset header: Accept-Ranges: bytes header: Connection: close header: Transfer-Encoding: chunked header: Content-Type: text/html; charset=iso-8859-1 header: Content-Language: en send: 'GET https://api.opensuse.org/source HTTP/1.1\r\nAccept-Encoding: identity\r\nHost: api.opensuse.org\r\nConnection: close\r\nUser-agent: osc/0.144\r\n\r\n' reply: 'HTTP/1.1 401 Authorization Required\r\n' header: Date: Thu, 06 Mar 2014 18:29:07 GMT header: Server: Apache/2.2.12 (Linux/SUSE) header: WWW-Authenticate: Basic realm="Use your novell account" header: Vary: accept-language,accept-charset header: Accept-Ranges: bytes header: Connection: close header: Transfer-Encoding: chunked header: Content-Type: text/html; charset=iso-8859-1 header: Content-Language: en Traceback (most recent call last): File "/usr/bin/osc", line 26, in <module> r = babysitter.run(osccli) File "/usr/lib/python2.7/site-packages/osc/babysitter.py", line 60, in run return prg.main(argv) File "/usr/lib/python2.7/site-packages/osc/cmdln.py", line 343, in main return self.cmd(args) File "/usr/lib/python2.7/site-packages/osc/cmdln.py", line 366, in cmd retval = self.onecmd(argv) File "/usr/lib/python2.7/site-packages/osc/cmdln.py", line 484, in onecmd return self._dispatch_cmd(handler, argv) File "/usr/lib/python2.7/site-packages/osc/cmdln.py", line 1214, in _dispatch_cmd return handler(argv[0], opts, *args) File "/usr/lib/python2.7/site-packages/osc/commandline.py", line 393, in do_list for prj in meta_get_project_list(apiurl, opts.deleted): File "/usr/lib/python2.7/site-packages/osc/core.py", line 3131, in meta_get_project_list f = http_GET(u) File "/usr/lib/python2.7/site-packages/osc/core.py", line 3042, in http_GET def http_GET(*args, **kwargs): return http_request('GET', *args, **kwargs) File "/usr/lib/python2.7/site-packages/osc/core.py", line 3031, in http_request fd = urlopen(req, data=data) File "/usr/lib64/python2.7/urllib2.py", line 127, in urlopen return _opener.open(url, data, timeout) File "/usr/lib64/python2.7/urllib2.py", line 410, in open response = meth(req, response) File "/usr/lib64/python2.7/urllib2.py", line 523, in http_response 'http', request, response, code, msg, hdrs) File "/usr/lib64/python2.7/urllib2.py", line 442, in error result = self._call_chain(*args) File "/usr/lib64/python2.7/urllib2.py", line 382, in _call_chain result = func(*args) File "/usr/lib64/python2.7/urllib2.py", line 897, in http_error_401 url, req, headers) File "/usr/lib64/python2.7/urllib2.py", line 872, in http_error_auth_reqed response = self.retry_http_basic_auth(host, req, realm) File "/usr/lib64/python2.7/urllib2.py", line 885, in retry_http_basic_auth return self.parent.open(req, timeout=req.timeout) File "/usr/lib64/python2.7/urllib2.py", line 410, in open response = meth(req, response) File "/usr/lib64/python2.7/urllib2.py", line 523, in http_response 'http', request, response, code, msg, hdrs) File "/usr/lib64/python2.7/urllib2.py", line 442, in error result = self._call_chain(*args) File "/usr/lib64/python2.7/urllib2.py", line 382, in _call_chain result = func(*args) File "/usr/lib64/python2.7/urllib2.py", line 897, in http_error_401 url, req, headers) File "/usr/lib64/python2.7/urllib2.py", line 872, in http_error_auth_reqed response = self.retry_http_basic_auth(host, req, realm) File "/usr/lib64/python2.7/urllib2.py", line 885, in retry_http_basic_auth return self.parent.open(req, timeout=req.timeout) File "/usr/lib64/python2.7/urllib2.py", line 404, in open response = self._open(req, data) File "/usr/lib64/python2.7/urllib2.py", line 422, in _open '_open', req) File "/usr/lib64/python2.7/urllib2.py", line 382, in _call_chain result = func(*args) File "/usr/lib64/python2.7/urllib2.py", line 1214, in http_open return self.do_open(httplib.HTTPConnection, req) File "/usr/lib64/python2.7/urllib2.py", line 1181, in do_open h.request(req.get_method(), req.get_selector(), req.data, headers) File "/usr/lib64/python2.7/httplib.py", line 973, in request self._send_request(method, url, body, headers) File "/usr/lib64/python2.7/httplib.py", line 1007, in _send_request self.endheaders(body) File "/usr/lib64/python2.7/httplib.py", line 969, in endheaders self._send_output(message_body) File "/usr/lib64/python2.7/httplib.py", line 829, in _send_output self.send(msg) File "/usr/lib/python2.7/site-packages/osc/conf.py", line 538, in new_method sys.stdout = self._orig_stdout AttributeError: HTTPConnection instance has no attribute '_orig_stdout' Andreas. -- Andreas Schwab, schwab(a)linux-m68k.org GPG Key fingerprint = 58CA 54C7 6D53 942B 1756 01D3 44D5 214B 8276 4ED5 "And now for something completely different." -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-buildservice+owner(a)opensuse.org

2 4

[opensuse-buildservice] Setting up osc: keyring and kWallet
by Johannes Kastl 06 Mar '14

06 Mar '14

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi everyone, first of, if this is the wrong list I apologize, it seemed the most fitting... I just had some minutes and wanted to dive into openSUSE after a long long time. So I tried to setup osc on my machine, and configure it so I could play around with some packages. One thing I could not get to work is osc storing username/password in kWallet. I could get it to store it in python-keyring (~./local/share/python_keyring/keyring_pass.cfg). Is this possible at the moment? Or is one of the bugs from early last year (Feb. 2013) hitting again? On one of my python scripts using python-keyring I had to explicitly set kWallet as backend (see below). Do I need to do this with osc too? Where? > import keyring > keyring.set_keyring(keyring.backends.kwallet.Keyring()) I am running osc from the openSUSE:/Tools repo on a Tumbleweed installation (osc-0.144.0-126.1.noarch). Regards, Johannes - -- Programming is like sex: if you make a mistake, you have to support it for the rest of your life. (unknown) -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.22 (GNU/Linux) Comment: Using GnuPG with SeaMonkey - http://www.enigmail.net/ iEYEARECAAYFAlMRjtMACgkQzi3gQ/xETbLyKACfTkIZsm7UkpQjLJ9CAd3SEo2X kNIAmwZxGa7MG8Zi7UtJDxqoL9nY5/b3 =n7zK -----END PGP SIGNATURE----- -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-buildservice+owner(a)opensuse.org

6 12

[opensuse-buildservice] [PATCH] vc: added -t <text> option in order to support a template
by Marcus Huewe 06 Mar '14

06 Mar '14

This can be used to create a new changes entry based on a predefined description text. Basically, this is a combination of the default behavior and the -m option. (Rationale: move the functionality which was added in commit b6ccac1ebd9cac5998118a7bb119508ade6b47fe (and reverted in commit d61f21fe0e582736b84c0107439a8bcea3b00244) to osc) --- vc | 22 +++++++++++++++++----- 1 files changed, 17 insertions(+), 5 deletions(-) diff --git a/vc b/vc index bf57343..06a29e9 100755 --- a/vc +++ b/vc @@ -39,21 +39,29 @@ fi while [ -n "$1" ]; do case "$1" in -m) - if [ $just_edit ]; then - echo "You cannot use -m and -e together!" + if [ -n "$just_edit" -o -n "$template" ]; then + echo "-m, -e and -t are mutually exclusive!" exit 1 fi message="$2" shift 2 ;; -e) - if [ -n "${message}" ]; then - echo "You cannot use -m and -e together!" + if [ -n "${message}" -o -n "$template" ]; then + echo "-m, -e and -t are mutually exclusive!" exit 1 fi just_edit=true shift 1 ;; + -t) + if [ -n "${message}" -o -n "$just_edit" ]; then + echo "-m, -e and -t are mutually exclusive!" + exit 1 + fi + template="$2" + shift 2 + ;; --help) echo "Usage: $0 [-m MESSAGE|-e] [filename[.changes]|path [file_with_comment]]" echo @@ -131,7 +139,11 @@ set +e cat "$content" echo elif [ ! $just_edit ]; then - echo "- " + if [ -n "$template" ]; then + echo -e "- $template" + else + echo "- " + fi echo fi cat $changelog -- 1.7.3.4 -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-buildservice+owner(a)opensuse.org

3 2

[opensuse-buildservice] osc broken: TypeError: feed() argument 1 must be string or read-only buffer, not None
by Olaf Hering 06 Mar '14

06 Mar '14

With current osc I get the following backtrace on commit: 'osc -A https://api.suse.de commit -m pkg vm-install svn_rev 6532 from 2014-03-03 17:26:44 +0000 vm-install metadata/last_svnrev.vm-install.txt' returned 1 commit failed, reset svn rev Traceback (most recent call last): File "/usr/bin/osc", line 26, in <module> r = babysitter.run(osccli) File "/usr/lib64/python2.6/site-packages/osc/babysitter.py", line 60, in run return prg.main(argv) File "/usr/lib64/python2.6/site-packages/osc/cmdln.py", line 343, in main return self.cmd(args) File "/usr/lib64/python2.6/site-packages/osc/cmdln.py", line 366, in cmd retval = self.onecmd(argv) File "/usr/lib64/python2.6/site-packages/osc/cmdln.py", line 484, in onecmd return self._dispatch_cmd(handler, argv) File "/usr/lib64/python2.6/site-packages/osc/cmdln.py", line 1214, in _dispatch_cmd return handler(argv[0], opts, *args) File "/usr/lib64/python2.6/site-packages/osc/commandline.py", line 4382, in do_commit if any(pac.is_link_to_different_project() for pac in pacs): File "/usr/lib64/python2.6/site-packages/osc/commandline.py", line 4382, in <genexpr> if any(pac.is_link_to_different_project() for pac in pacs): File "/usr/lib64/python2.6/site-packages/osc/core.py", line 1568, in is_link_to_different_project orgprj = self.get_local_origin_project() File "/usr/lib64/python2.6/site-packages/osc/core.py", line 1563, in get_local_origin_project root = ET.fromstring(self.get_local_meta()) File "<string>", line 85, in XML TypeError: feed() argument 1 must be string or read-only buffer, not None This is on bax, sles11sp3. Looks like its broken since many days already, at least since last Friday. Olaf -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-buildservice+owner(a)opensuse.org

5 10

[opensuse-buildservice] Help with .deb package (The RPM works fine)
by Perry Werneck 05 Mar '14

05 Mar '14

Hi, I´m trying to build a .deb from OBS project but, I´m stucked with the error below, (probably my fault since I don´ know much about .deb packaging). I´ll be glad for some help! [ 46s] dpkg-source: info: building oorexx in oorexx_4.2.0.diff.gz [ 46s] dpkg-source: warning: newly created empty file 'debian/oorexx.postrm.dpkg-orig' will not be represented in diff [ 46s] dpkg-source: warning: newly created empty file 'debian/rules.dpkg-orig' will not be represented in diff [ 46s] dpkg-source: warning: newly created empty file 'debian/control.dpkg-orig' will not be represented in diff [ 46s] dpkg-source: warning: newly created empty file 'debian/changelog.dpkg-orig' will not be represented in diff [ 46s] dpkg-source: warning: newly created empty file 'debian/compat.dpkg-orig' will not be represented in diff [ 46s] dpkg-source: warning: newly created empty file 'debian/oorexx.postinst.dpkg-orig' will not be represented in diff [ 46s] dpkg-source: error: diff `/usr/src/packages/oorexx_4.2.0.diff.gz.new.EnHpNv' patches file with name ending .dpkg-orig [ 46s] dpkg-buildpackage: error: dpkg-source -b BUILD gave error exit status 29 -- Perry Werneck Brasília/DF -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-buildservice+owner(a)opensuse.org

1 0

[opensuse-buildservice] disable %check in local build
by Olaf Hering 03 Mar '14

03 Mar '14

"osc build --nochecks" does still execute the %check section, how can this be disabled without editing the spec file? Olaf -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-buildservice+owner(a)opensuse.org

3 5

[opensuse-buildservice] `osc ci` traces back at new package
by Dmitriy Perlow 03 Mar '14

03 Mar '14

Old ones can be updated fine. Any ideas? PS Sorry if wrong place. %osc ci Traceback (most recent call last): File "/usr/bin/osc", line 26, in <module> r = babysitter.run(osccli) File "/usr/lib/python2.7/site-packages/osc/babysitter.py", line 60, in run return prg.main(argv) File "/usr/lib/python2.7/site-packages/osc/cmdln.py", line 343, in main return self.cmd(args) File "/usr/lib/python2.7/site-packages/osc/cmdln.py", line 366, in cmd retval = self.onecmd(argv) File "/usr/lib/python2.7/site-packages/osc/cmdln.py", line 484, in onecmd return self._dispatch_cmd(handler, argv) File "/usr/lib/python2.7/site-packages/osc/cmdln.py", line 1214, in _dispatch_cmd return handler(argv[0], opts, *args) File "/usr/lib/python2.7/site-packages/osc/commandline.py", line 4382, in do_commit if any(pac.is_link_to_different_project() for pac in pacs): File "/usr/lib/python2.7/site-packages/osc/commandline.py", line 4382, in <genexpr> if any(pac.is_link_to_different_project() for pac in pacs): File "/usr/lib/python2.7/site-packages/osc/core.py", line 1568, in is_link_to_different_project orgprj = self.get_local_origin_project() File "/usr/lib/python2.7/site-packages/osc/core.py", line 1563, in get_local_origin_project root = ET.fromstring(self.get_local_meta()) File "<string>", line 124, in XML TypeError: must be string or read-only buffer, not None %osc --version 0.144 %LANG=en_US.UTF-8 zypper if osc Loading repository data... Reading installed packages... Information for package osc: ---------------------------- Repository: provider-openSUSE-Tools Name: osc Version: 0.144.1-127.1 Arch: noarch Vendor: obs://build.opensuse.org/openSUSE:Tools Installed: Yes Status: up-to-date Installed Size: 1.6 MiB Summary: openSUSE Build Service Commander Description: Commandline client for the openSUSE Build Service. See http://en.opensuse.org/openSUSE:OSC , as well as http://en.opensuse.org/openSUSE:Build_Service_Tutorial for a general introduction. -- Best regards, Dmitriy DA(P).DarkneSS Perlow @ Linux x64 -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-buildservice+owner(a)opensuse.org

3 2