August 2013 - openSUSE Build Service - openSUSE Mailing Lists

[opensuse-buildservice] Add Available Scheduler Architectures
by Jorge F. Hernandez 14 Aug '13

14 Aug '13

Hey guys, How can I add Available Scheduler Architectures to the OBS Appliance? all I can see is Kiwi. Thanks. -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-buildservice+owner(a)opensuse.org

1 0

[opensuse-buildservice] another round of cleanups ...
by Adrian Schröter 14 Aug '13

14 Aug '13

As you might have noticed is the scheduler quite slow these days. The root cause is that our disks are almost full. While new hardware is on the way, I took this as a reason to create another bunch of requests to delete repositories building for distributions which are EOL. This new requests contain the point of time when they will get accepted, if they are still in "new" state. Our osc and webui can not show it yet (will work on that tomorrow), but you can see it via the api already if you are curious. For example: osc api /request/187342 -- Adrian Schroeter email: adrian(a)suse.de SUSE LINUX GmbH, GF: Jeff Hawn, Jennifer Guild, Felix Imendörffer, HRB 21284 (AG Nürnberg) Maxfeldstraße 5 90409 Nürnberg Germany -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-buildservice+owner(a)opensuse.org

1 0

[opensuse-buildservice] Log for Error 500
by Jorge Hernandez 14 Aug '13

14 Aug '13

Hey guys, I finally could put an OBS appliance together, I logged in as Admin and tried to create my first project and got an error 500, I checked /srv/www/obs/api/log/production.log and all it says is: [^[[32mINFO ^[[0m|# 3623] Started GET "/source/home:Admin/_meta" for 1.2.3.4 at 2013-08-13 19:24:06 +0000 [^[[32mINFO ^[[0m|# 3623] Processing by SourceController#project_meta as XML [^[[32mINFO ^[[0m|# 3623] Parameters: {"project"=>"home:Admin"} [^[[32mINFO ^[[0m|# 3623] Rendered status.xml.builder (0.2ms) [^[[32mINFO ^[[0m|# 3623] Completed 404 Not Found in 6ms (Views: 0.6ms | ActiveRecord: 0.6ms | Backend: 0.0ms | XML: 0.0ms) [^[[32mINFO ^[[0m|# 3623] Started PUT "/source/home:Admin/_meta" for 1.2.3.4 at 2013-08-13 19:24:06 +0000 [^[[32mINFO ^[[0m|# 3623] Processing by SourceController#project_meta as XML [^[[32mINFO ^[[0m|# 3623] Parameters: {"project"=>"home:Admin"} [^[[32mINFO ^[[0m|# 3623] Rendered text template (0.0ms) [^[[32mINFO ^[[0m|# 3623] Completed 500 Internal Server Error in 92ms (Views: 0.5ms | ActiveRecord: 9.0ms | Backend: 3.0ms | XML: 0.0ms) Also, webui/log/production.log has this: [^[[32mINFO ^[[0m|# 3725] Authenticated request to "/project/save_new?method=post" from Admin [^[[31mERROR^[[0m|# 3725] --> caught EOFError: end of file reached, retrying with new HTTP connection [^[[32mINFO ^[[0m|# 3725] Completed 500 Internal Server Error in 793ms [^[[31mFATAL^[[0m|# 3725] ActiveXML::Transport::Error (<status code='500' origin='backend'> <summary>access denied by $ipaccess rules</summary> Any ideas what can cause that? To my untrained eyes it looks like it did not allow me to create it (access denied) so please let me know if I need to adjust something in the config files. Thanks -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-buildservice+owner(a)opensuse.org

2 1

[opensuse-buildservice] OBS health state
by Hans-Peter Jansen 13 Aug '13

13 Aug '13

Hi, looks like OBS health state is converging to the zero line.. :-( Can we expect recovery soon, or is there a bigger issue lurking? Cheers, Pete -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-buildservice+owner(a)opensuse.org

1 0

[opensuse-buildservice] Problem with OBS appliance
by Jorge Hernandez 13 Aug '13

13 Aug '13

I installed it and I'm getting this: Ruby (Rack) application could not be started These are the possible causes: There may be a syntax error in the application's code. Please check for such errors and fix them. A required library may not installed. Please install all libraries that this application requires. The application may not be properly configured. Please check whether all configuration files are written correctly, fix any incorrect configurations, and restart this application. A service that the application relies on (such as the database server or the Ferret search engine server) may not have been started. Please start that service. I noticed it says that host is missing so I put frontend_host="localhost" in /srv/www/obs/webui/config/options.yml (I think that's the name of the file) And after that it says Error 500 I can reach https://myobsserver:444 and login using Admin/opensuse What can I do? Thanks, -- Jorge Hernandez 165 East 115th Street #4B New York, NY 10029 jfha73(a)gmail.com tel: fax: mobile: 646-403-9802 646-519-4352 646-262-1908 -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-buildservice+owner(a)opensuse.org

1 0

[opensuse-buildservice] how to add screenshot for software.opensuse.org ?
by Martin Koller 11 Aug '13

11 Aug '13

Hi there, I build my program kbackup on OBS and searching for it on software.o.o http://software.opensuse.org/package/kbackup shows an icon "No screenshot available" How can I provide a special image for the screenshot on that page ? -- Best regards/Schöne Grüße Martin A: Because it breaks the logical sequence of discussion Q: Why is top posting bad? () ascii ribbon campaign - against html e-mail /\ www.asciiribbon.org - against proprietary attachments Geschenkideen, Accessoires, Seifen, Kulinarisches: www.bibibest.at -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-buildservice+owner(a)opensuse.org

4 4

[opensuse-buildservice] Giving abuild user a 2nd group?
by Bernhard Voelker 08 Aug '13

08 Aug '13

Hi *, in the testsuite of the coreutils package, several tests are skipped because the 'abuild' user is only member of 1 group while these tests require the membership in at least 2 groups. I want to enhance the test coverage of that basic package. Is there a way to tell OBS to add 'abuild' to a 2nd group? Thanks & have a nice day, Berny -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-buildservice+owner(a)opensuse.org

7 22

[opensuse-buildservice] calling osc from Python scripts
by Karsten Keil 07 Aug '13

07 Aug '13

Hi, I'm writing some simple user helper scripts. One of it need to do for example a 'osc copypac origproject package newproject'. I did this with a function: def obs_copypac(org, pkg, new): cmdline = "osc copypac -e %s %s %s" % (org, pkg, new) dbg_print( "cmdline: %s" % cmdline ) p = Popen(cmdline, shell=True, stdout=PIPE, stderr=PIPE) (stdout, stderr) = p.communicate() rc = p.returncode dbg_print( "osc copypac output: %s" % stdout ) if rc: print( osc copypac error: %s" % stderr return rc Works as expected. Then I remembered that osc itself was written in Python as well, so it should be better to call the python stuff directly. I looked at the osc-wrapper.py and was thinking that it should be easy to do. Simple give the commandline.Osc() call the arguments for the osc command like osccli = commandline.Osc("copypac","-e", org, pkg, new) r = babysitter.run(osccli) But this does not work, it seems the arguments are ignored, I get always the osc help page (same as running osc with no arguments). What do I missing here ? Thanks Karsten -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-buildservice+owner(a)opensuse.org

2 3

[opensuse-buildservice] VMX images for version 2.4
by Corrius, Jesus 06 Aug '13

06 Aug '13

Hi guys, If you download the obs-server.x86_64-2.4.4-Build1.1-vmx.tar.bz2 file from: http://download.opensuse.org/repositories/OBS:/Server:/2.4/images/ Inside there's a raw image instead of a vmx or vmdk. Is this a mistake or am i missing something? Thank you. Jesus Corrius | ヘススコルリウス Developer | Application Management | NTT Europe Ltd. Tel: +34 934452461 | Mob: ________________________________ Please consider the environment before printing this e-mail or its attachments. This e-mail (and any attachments) contains information, which is confidential and intended solely for the attention and use of the named addressee(s). If you are not the intended recipient you must not copy, distribute or use it for any purpose or disclose the contents to any person. If you have received this e-mail in error, please notify us immediately at enquiry.uk(a)ntt.eu. The information contained in this e-mail (and any attachments) is supplied in good faith, but the sender shall not be under any liability in damages or otherwise for any reliance that may be placed upon it by the recipient. Any comments or opinions expressed are those of the originator not of NTT Europe Ltd. unless otherwise expressly stated. NTT Europe Limited is a company registered in England and Wales with company number 2307625. Registered Address: NTT Europe Ltd. 3rd Floor, Devon house, 58-60 St. Katharine's Way, London, E1W 1LB, UK. Telephone +44-20-7977-1000. Facsimile +44-20-7977-1001. Website Link: http://www.eu.ntt.com

2 1

[opensuse-buildservice] GSoC 2013 update for the week ending on 2/08/2013
by Shayon Mukherjee 05 Aug '13

05 Aug '13

Hello folks, So, here is my GSoC 2013 update for the week ending on 2/08/2013 1. What have I done last week? Refactoring the existing code making it RAILS’ish. All data between api and webui is JSON and not XML. Since refactoring was needed to get merged, the merge/PR has been postponed for now. 2. What am I'm doing this week By the end of the week, I wish to finish the refactoring, embed edit and delete functionality of comments for the comment owners and try my best to finish writing test cases for both webui and api. Since starting the week after that, I will be moving in to my college and won't be able to work for the first few days (2-3 days). Important links Trello: https://trello.com/board/discussion-system/51a5ede2db062a7e6f001b7c Github: https://github.com/shayonj/open-build-service Travis: https://travis-ci.org/shayonj/open-build-service Cheers! -- Shayon http://wrkb.in IRC nick: shayonj -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-buildservice+owner(a)opensuse.org

1 0

[opensuse-buildservice] `osc whatdependson` for package in dependency project
by Marguerite Su 05 Aug '13

05 Aug '13

Hi, all, Recently I'm working on porting some Packman packages to ffmpeg 2.0 I saw there's a trick on the Goals 13.1 gstreamer-0_10 to gstream-1_0 wiki page: osc whatdependson openSUSE_Factory gstreamer-0_10 standard x86_64 So I used: osc -Apm whatdependson Essentials ffmpeg_oldabi openSUSE_12.3 x86_64 The command returned useful informations. But when I use: osc -Apm whatdependson Extra ffmpeg_oldabi openSUSE_12.3 x86_64 it didn't return any information. You see Extra is a project has Essentials in its path: <path project="Essentials" repository="openSUSE_12.3"/> So packages there can depend on libffmpeg_oldabi-devel which belongs to ffmpeg_oldabi package. So how can I check pacakge dependency in this project against a package in its dependency project? Greetings Marguerite -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-buildservice+owner(a)opensuse.org

2 2

[opensuse-buildservice] noarch, debian and arm packages
by Volker Kuhlmann 05 Aug '13

05 Aug '13

When are noarch packages built? It's not a selectable architecture. I enabled the two arm distros in my home project but a stand-alone noarch package doesn't build. Something complains about a missing rpm-build dependency. What are the steps for Debian x86 packages? I only see failures. And there's no rpmlint output and nothing equivalent for debian. The OBS documentation is silent on all this as far as I can tell. Thanks, Volker -- Volker Kuhlmann http://volker.dnsalias.net/ Please do not CC list postings to me. -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-buildservice+owner(a)opensuse.org

5 7

[opensuse-buildservice] Problems with build job constraints
by Guido Berhoerster 05 Aug '13

05 Aug '13

Hi, at Packman we have the problem that a package with build job constraints remains indefinetly in scheduled state although the memory constraints should be satisfied by at least some build hosts. What could be the problem or how can we further diagnose this? More details are at http://lists.links2linux.de/pipermail/packman/2013-July/012114.html and http://lists.links2linux.de/pipermail/packman/2013-July/012158.html Thanks, -- Guido Berhoerster -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-buildservice+owner(a)opensuse.org

3 2

[opensuse-buildservice] Getting build logs and osc status
by Volker Kuhlmann 03 Aug '13

03 Aug '13

The build results for Debian say "excluded" for absolutely everything. I'm trying to find build logs through the web interface but can't see where to get them (for any package, distro, arch). osc -v result isn't helping. It doesn't show the configured debian distros, and therefore not the status of "excluded" either (but it's in the legend). osc bl Debian_7.0 x86_64 Server returned an error: HTTP Error 400: remote error scriptutils no logfile remote error: scriptutils no logfile Well it's noarch, but that doesn't exist. osc bl openSUSE_12.3 armv7l Server returned an error: HTTP Error 400: remote error scriptutils no logfile remote error: scriptutils no logfile Package should build, it has no other dependencies. osc bl openSUSE_12.3 armv7l Server returned an error: HTTP Error 400: remote error wav2cdr no logfile remote error: wav2cdr no logfile This is an ANSI C program without dependencies further than the standard C library. Without any sort of problem report it's impossible to fix anything. Where do I go for help? Thanks, Volker -- Volker Kuhlmann http://volker.dnsalias.net/ Please do not CC list postings to me. -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-buildservice+owner(a)opensuse.org

2 2

[opensuse-buildservice] novel/attachmategroup server admin here?
by Ruediger Meier 02 Aug '13

02 Aug '13

Hi, I had and still have often problems to use opensuse web services via IPv6. I think that opensuse/novell servers or their routers have problems with pmtu detection. Is there any admin on this list who could help me to debug this? For example I always timeout when connecting to https://esp.attachmategroup.com (which is needed to login bugzilla) (ping6 works) My client machine has this IP 2a01:170:1093::28 When I try this I don't get any answer: $ curl -v -6 https://esp.attachmategroup.com/ >/dev/null <timeout> (I get some ack packages back but none with real load) But it works after doing a tracepath (i.e. after I "push" my MTU to the server) $ tracepath6 esp.attachmategroup.com 1?: [LOCALHOST] 0.030ms pmtu 1500 1: skylla.ga-group.nl 0.359ms 1: skylla.ga-group.nl 0.273ms 2: skylla.ga-group.nl 0.318ms pmtu 1456 2: 2a01:170:0:10::1 30.847ms 3: 2a01:170:2:1:1::4 31.403ms 4: TAL.FRA-12-eth012-612.v6.lambdanet.net 32.352ms asymm 5 5: FRA-1-eth1-104.v6.lambdanet.net 32.359ms asymm 6 6: 6b1.fft4.alter.net 40.413ms 7: 2.gr-1-1-0.GW66.LAX9.ALTER.NET 194.260ms asymm 11 8: 2600:806:31f::6 215.202ms asymm 12 9: 2600:806:31f::6 206.308ms asymm 12 10: 2600:806:310::1 204.252ms asymm 13 11: 2600:806:310::106 204.402ms reached Resume: pmtu 1456 hops 11 back 51 $ curl -v -6 https://esp.attachmategroup.com/ >/dev/null <success> So it's surely a problem with path MTU detection (pmtu). Either their servers don't invoke such pmtu detection or it simply does not work from their side. There is a small chance that my ISP is the problem but it's more likely that attachmategroup.com is broken. Maybe they block incomming icmp6 ("package too big") or whatever. Who can help me or bring this to novel? webmaster(a)novel.com has not done anything since 2 weeks. cu, Rudi -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-buildservice+owner(a)opensuse.org

3 4

[opensuse-buildservice] perl-BSSolv
by Miroslav Suchý 02 Aug '13

02 Aug '13

Hi, package obs-server has: BuildRequires: perl-BSSolv but BSSolv is only provided by obs-server itself. While there exist: https://build.opensuse.org/package/show/openSUSE:Tools/perl-BSSolv It contains old BSSolv linked against old libsolv. I have questions: 1) why is BSSolv.pm bundled in obs-server in first place and why it is not just simply required and used from standard path? 2) Where is ultimate upstream for perl-BSSolv? I feel that correct way is to create new repository perl-BSSolv under https://github.com/openSUSE/ Another approach is to remove BR and Requires of perl-BSSolv as it is part of obs-server, but that does not seem systematic to me. -- Miroslav Suchy Red Hat, Software Engineer -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-buildservice+owner(a)opensuse.org

2 2