September 2010 - YaST Development - openSUSE Mailing Lists

[yast-devel] WebYaST stand-up call 29-Sep-2010
by Klaus Kaempf 29 Sep '10

29 Sep '10

kkaempf, vgorobets, mzugec, jsuchome, schubi, mvidner kkaempf: - pushed final fixes to autobuild - fixed install issues reported by QA vgorobets: - resubmitted roles-ui - more testing mzugec: - testing slms jsuchome: - testing webyast upgrade via slms schubi: - no update mvidner: - back from vacation - will check if all packages are up to date in buildservice --- SUSE LINUX Products GmbH, GF: Markus Rex, HRB 16746 (AG Nürnberg) -- To unsubscribe, e-mail: yast-devel+unsubscribe(a)opensuse.org For additional commands, e-mail: yast-devel+help(a)opensuse.org

1 0

[yast-devel] Nine easy steps to test SLMS upgrade of WebYaST 1.0 to WebYaST 1.1
by Jiri Suchomel 24 Sep '10

24 Sep '10

It should be noted here, that I was not able to do it to the end.... I ask SLMS people to look at this as well and correct me if I'm wrong. 1. install and configure SLMS - SLMS is avilable as appliance or addon installable over SLE11SP1 - start webyast there and choose SLMS Configuration (part of initial webyast sequence on SLMS appliance, or accessible directly from webyast control panel) - enter your fqdn for Registration Host, Redirector and Update Repo host - generate or import GPG key - enter NCC and Studio credentials: use the links in the last tab to acquire them - save the config 2. in studio, create SLE11 appliance with WebYaST 1.0 - use the same studio as configured in SLMS (internal, external, onsite) - susestudio.com currently does not offer building of SLE11 based appliances, but you can clone some existing one (e.g. [1]) - build the appliance, but there's no need to download it yet (it will need rebuild) 3. in SLMS web interface (accessible from webyast control center, or directly using just https://your-slms-fqdn) - mirror your appliances (= refresh from Studio button), it can take quite a lot of time - select your appliance, click on it, and click Enable on next page - on the same page, click Adapt: this will adapt the registration data of our appliance configuration in studio and triggers its rebuild - for this appliance, create customer and subscription: Go to Customers tab -> Create new customer (link on the right), enter ID and Create Click on customer just created -> Subscriptions -> Create new subscription, choose your appliance and Create - Now, you can see Registration Key in the list of Subscriptions 4. once the appliance is rebuilt, download it from studio and boot it in VM 5. in your appliance, run registration - now it should contact your SLMS: - use the registration code seen in the SLMS list of Subscriptions - it may fail due to unknown certificate; as a solution, copy /etc/slms.d/certs/servercert from SLMS to your client appliance's /etc/ssl/certs/ and run c_rehash in appliance. I do not know how this should be handled by end-user.... 6. Now, appliance should be registered against SLMS, so SLMS should be able to provide patches for that. Let's assume you've worked in that appliance several months now, while SP1 and WebYaST 1.1 was released meanwhile. Now, we want to upgrade it. You can close this appliance for now, it won't be needed some minutes... er, hours. 7. Go to studio, and edit your SLE11-based appliance. You should see "SLES 11 SP1 is now available" message with Upgrade button. - click on Upgrade for upgrading to SP1. Check if update channels were upgraded correctly as well. Upgrade WebYaST 1.0 to WebYaST 1.1 manually. - AFAIK you do not need to rebuild the appliance (SLMS works with selected packages, not with builds) 8. Trying to create the patch(es) - go to SLMS web UI and click Refresh from Studio. It will take its time. - select your appliance, select Updates tab, there should be some updates pending. Go to Testing Update Repository and Create new patch - If it fails, it might be needed to fiddle around the packages in Additional Packages section. In my previous attemtps, I was advices to "Add" all of them, but this part still seems to be problematic. Ask your friendly SLMS neighbor what to do once you are at this place. - Once test patch is created, you can Approve and Publish it, so it appears in public channel. (Or you can reconfigure subscription so the Test Channel is provided to client appliances instead of Production ones) - in Location, you can see where the patch data are stored on SLMS (/srv/www/slms/updates/<number>), so you can manually look if it looks good 9. Once the patch is correctly generated (related bug: 640790), boot your client appliance again. It should see the patch provided by SLMS. Try to update. If the patch is somehow broken, webYaST is not able to report it (which is not such a problem, becayse patches should be tested and so not broken), so try zypper-ing. [1] try cloning http://susegallery.com/a/pTadvY/sles-11-jeos-ready-for-cloing -- Jiri Suchomel SUSE LINUX, s.r.o. e-mail: jsuchome(a)suse.cz Lihovarská 1060/12 tel: +420 284 028 960 190 00 Praha 9, Czech Republic http://www.suse.cz -- To unsubscribe, e-mail: yast-devel+unsubscribe(a)opensuse.org For additional commands, e-mail: yast-devel+help(a)opensuse.org

2 1

[yast-devel] WebYaST stand-up call 24-Sep-2010
by Klaus Kaempf 24 Sep '10

24 Sep '10

jsuchome, vgorobets, schubi, kkaempf jsuchome: - Testing SLMS with WebYaST, still pending bugfixes in SLMS - Will document vgorobets: - no update schubi: - no update kkaempf: - looked at first build of gold master candidate --- SUSE LINUX Products GmbH, GF: Markus Rex, HRB 16746 (AG Nürnberg) -- To unsubscribe, e-mail: yast-devel+unsubscribe(a)opensuse.org For additional commands, e-mail: yast-devel+help(a)opensuse.org

1 0

[yast-devel] WebYaST stand-up call 23-Sep-2010
by Klaus Kaempf 23 Sep '10

23 Sep '10

lslezak, mzugec, schubi, vgorobets lslezak: - fixed 'patch message' bug. After kernel update, user is now reminded to reboot mzugec: - Helped with IPv6 setup and testing schubi: - Fixed remaining WY bugs vgorobets: - Documented IPv6 in lighttpd config - Passed info about IPv6 to docu kkaempf: - Prepped final 'atk 1.1' repo (x86, x86_64 only) - Will check with buildservice on getting first GMC repos --- SUSE LINUX Products GmbH, GF: Markus Rex, HRB 16746 (AG Nürnberg) -- To unsubscribe, e-mail: yast-devel+unsubscribe(a)opensuse.org For additional commands, e-mail: yast-devel+help(a)opensuse.org

1 0

[yast-devel] WebYaST stand-up call 22-Sep-2010
by Klaus Kaempf 22 Sep '10

22 Sep '10

kkaempf, mzugec, vgorobets, schubi, jsuchome, kkaempf: - no update mzugec: - helping vgorobets with IPv6 - next: look into Apache proxy with WebYaST (Onsite) vgorobets: - fixed IPv6 with WebYaST (fixed dhcp server entry) schubi: - closing bugs jsuchome: - testing SLMS update - able to generate patch now, but patch is invalid (SLMS bug) --- SUSE LINUX Products GmbH, GF: Markus Rex, HRB 16746 (AG Nürnberg) -- To unsubscribe, e-mail: yast-devel+unsubscribe(a)opensuse.org For additional commands, e-mail: yast-devel+help(a)opensuse.org

1 0

[yast-devel] WebYaST stand-up meeting, 2010-Sep-21
by Klaus Kaempf 21 Sep '10

21 Sep '10

vgorobets, schubi, mzugec, lslezak, kkaempf, jsuchome vgorobets: - Looking at IPv6 for lighttpd schubi: - Helped vgorobets mzugec: - Further testing upgrade from ATK 1.0 to 1.1, working fine - Found one dependency issue, will file bug report lslezak: - Looking into patch messages (after kernel update) kkaempf: - No update jsuchome: - Progress on SLMS testing (ATK 1.0 to 1.1 upgrade) --- SUSE LINUX Products GmbH, GF: Markus Rex, HRB 16746 (AG Nürnberg) -- To unsubscribe, e-mail: yast-devel+unsubscribe(a)opensuse.org For additional commands, e-mail: yast-devel+help(a)opensuse.org

1 0

[yast-devel] WebYaST stand-up meeting, 2010-Sep-20
by Klaus Kaempf 20 Sep '10

20 Sep '10

juchome, lslezak, kkaempf, mvidner, mzugec, schubi, vgorobets jsuchome: - continued testing with SLMS - working with SLMS team to get WebYaST updates working lslezak: - tested WebYaST in IE, no bugs found - WebYaST (lighttpd) not supporting IPv6 kkaempf: - working with buildservice on final atk 1.1 repo (x86, x86_64 only) mvidner: - Short break between visiting some mountains - Working on mail backlog, ping him directly for help with bugs mzugec: - tested upgraded ATK 1.0 to 1.1 in Studio, experienced session validation problem. Need to retest - Check with mvidner on DBus problem schubi: - working on messages ('please reboot' after kernel update) - lslezak to help with PackageKit vgorobets: - No updates --- SUSE LINUX Products GmbH, GF: Markus Rex, HRB 16746 (AG Nürnberg) -- To unsubscribe, e-mail: yast-devel+unsubscribe(a)opensuse.org For additional commands, e-mail: yast-devel+help(a)opensuse.org

1 0

[yast-devel] WebYaST RC3 - MSIE8 test report
by Ladislav Slezak 17 Sep '10

17 Sep '10

Hi all, I went through all WebYaST modules in RC3 using MSIE8 browser and everything was OK, great! -- Best Regards Ladislav Slezák Yast Developer ------------------------------------------------------------------------ SUSE LINUX, s.r.o. e-mail: lslezak(a)suse.cz Lihovarská 1060/12 tel: +420 284 028 960 190 00 Prague 9 fax: +420 284 028 951 Czech Republic http://www.suse.cz/ -- To unsubscribe, e-mail: yast-devel+unsubscribe(a)opensuse.org For additional commands, e-mail: yast-devel+help(a)opensuse.org

2 1

[yast-devel] WebYaST stand-up meeting, 2010-Sep-17
by Klaus Kaempf 17 Sep '10

17 Sep '10

WebYaST stand-up meeting 2010-Sep-17 mzugec, lslezak, kkaempf, schubi mzugec: - better handling of changed IP - needs help on DBus lslezak: - WebYaST testing in conjunction with SLMS kkaempf: - Released RC3 - Added -testsuite packages schubi: - Fixed 'restart service after update' bug - Looking into 'patch message' (tell user to reboot after kernel update) now --- SUSE LINUX Products GmbH, GF: Markus Rex, HRB 16746 (AG Nürnberg) -- To unsubscribe, e-mail: yast-devel+unsubscribe(a)opensuse.org For additional commands, e-mail: yast-devel+help(a)opensuse.org

1 0

[yast-devel] WebYaST stand-up meeting, 2010-Sep-15
by Klaus Kaempf 15 Sep '10

15 Sep '10

WebYaST stand-up meeting 2010-Sep-15 mzugec, kkaempf, jsuchome, schubi, vgorobets schubi: - still looking into "service not restarted after update" bugs - looks like an RPM problem in conjunction with the init scripts vgorobets: - retested WebYaST 1.0 to 1.1 update, successful - tested WebYaST 1.1, found bug in roles mgmt mzugec: - yast2-network is too old, not submitted to OBS - testing jsuchome: - testing SLMS based update kkaempf: - building and testing appliance and iso for RC3 --- SUSE LINUX Products GmbH, GF: Markus Rex, HRB 16746 (AG Nürnberg) -- To unsubscribe, e-mail: yast-devel+unsubscribe(a)opensuse.org For additional commands, e-mail: yast-devel+help(a)opensuse.org

1 0