- openSUSE Kernel

[opensuse-kernel] 11.3 pusher?
by Stephan Kulow 26 Jan '10

26 Jan '10

Hi, Who can I talk into taking responsibility that the kernel-source in factory doesn't fall behind master that much as it currently is (I'm counting 282 commits since 4070eecb)? Unfortunately Kernel:HEAD/kernel-source stopped 2009-12-09 and 2009-12-11 saw the last manual update. Otherwise I could push the changes myself from time to time, but it would still be better if someone was responsible who knows the current status. Greetings, Stephan -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-kernel+help(a)opensuse.org

5 5

[opensuse-kernel] 11.2 kernel-rt-2.6.31-3.4 won't boot
by Dave Plater 20 Jan '10

20 Jan '10

Hi, I decided to try out the rt kernel as the description says optimized for desktop and I maintain rosegarden4 which I thought would benefit from it but it won't boot due to not being able to see my disk. It gets past grub and loads but cannot see any disks, even the ext2 boot partition that it was loaded from. I searched bugzilla and the only bug against was the lack of source and that was for 11.0. Does nobody use this kernel or am I missing something? Regards Dave P -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-kernel+help(a)opensuse.org

3 3

[opensuse-kernel] USB HUB reset within FTDI_SIO is needed
by Hársszegi Tibor 20 Jan '10

20 Jan '10

Hi, our company uses the FTDI_SIO based USB 2.0 printer. This printer has "ill habits" so that sometimes it gets stuck and no longer replies to usb_control_msg()-es. We had a "fix" for this behaviour to change 2 USB related modules within the Linux kernel. 1.) FTDI_SIO, we changed this to "overrule" the regular usb_control_msg() with our own wrapper. Within this wrapper we counted within 60 second the number of unacked usb_control_msg()s and if that reached 10, we restarted the complete USB HUB owning our printer (we had to kickstart the HUB instead of the printer as restarting the printer didn't help). 2.) HUB.C, To be able to restart the HUB we had to change this as well to make usb_kick_khubd (as that was used within FTDI to restart the HUB). Both of these changes seemd to flawlessly work without full kernel recompilation as both of the affected codes were built by default as "modules" into the OpenSuse kernels. But it has changed in 11.2 because of USB/boot speed-up purposes. Can any of you propose any alternative solution to our problem so that we : * don't need to do a full kernel recompliation, thus we can use the plain, vanilla kernel delivered on the standard 11.2 distro * the changes still work as our patch works now, i.e. without any kind of user interaction, automatically we can kickstart a given USB HUB which owns a given device (no clue, but maybe we could sniff /proc/bus/usb/devices and do a USBDEVFS_RESET on the owner of our device?) Thanks in advance, Tibor Harsszegi -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-kernel+help(a)opensuse.org

3 5

[opensuse-kernel] reintroduce .configs in kernel-source.rpm?
by Michal Marek 20 Jan '10

20 Jan '10

Hi, in the past, the kernel-source package used to install the config files for it's architecture to /usr/src/linux-obj/$arch/$flavor/.config Now kernel-source is noarch and the the files below /usr/src/linux-obj/ are packaged in kernel-$flavor-devel. This works fine for KMPs, but it's unintuitive for people who install the kernel-source package and want to manually recompile their kernel - they have to install an additional -devel package for just the single .config file. Therefore I was thinking about adding the .config files to kernel-source, e.g. /usr/src/linux/config/$arch/$flavor like the config/ subdir in git (and hope that there won't appear a 'config' directory in the upstream kernel). Or maybe place the configs next to the upstream defconfigs: /usr/src/linux/arch/$arch/configs/suse_$flavor_defconfig Then it would be possible to say make O=... suse_$flavor_defconfig (it would not be that easy actually, because x86 and x86_64 share the same directory). What do you think? Michal -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-kernel+help(a)opensuse.org

5 6

[opensuse-kernel] scheduling while atomic with 2.6.31.8
by Andreas Jaeger 14 Jan '10

14 Jan '10

I saw with 2.6.31.7 and now again with 2.6.31.8 some OOPS during boot. Should I open a bugreport for this? Does this happen for others as well? Andreas [ 0.000000] Linux version 2.6.31.8-0.0.0.0.239ecb7-desktop (geeko@buildhost) (gcc version 4.4.1 [gcc-4_4-branch revision 150839] (SUSE Linux) ) #1 SMP PREEMPT 2009-12-14 19:14:33 +0100 [ 0.000000] Command line: root=/dev/disk/by-id/ata-ST9120822AS_5LZ2112B- part7 resume=/dev/disk/by-id/ata-ST9120822AS_5LZ2112B-part5 splash=silent quiet i915.modeset=1 vga=0x317 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009d800 (usable) [ 0.000000] BIOS-e820: 000000000009d800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000007d6b0000 (usable) [ 0.000000] BIOS-e820: 000000007d6b0000 - 000000007d6cc000 (ACPI data) [ 0.000000] BIOS-e820: 000000007d6cc000 - 000000007d700000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000007d700000 - 000000007e000000 (reserved) [ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved) [ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) [ 0.000000] DMI present. [ 0.000000] last_pfn = 0x7d6b0 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CFFFF write-protect [ 0.000000] D0000-DFFFF uncachable [ 0.000000] E0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 07E000000 mask FFE000000 uncachable [ 0.000000] 1 base 000000000 mask F80000000 write-back [ 0.000000] 2 base 07D700000 mask FFFF00000 uncachable [ 0.000000] 3 base 07D800000 mask FFF800000 uncachable [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 0000000000001000 - 0000000000006000 (usable) ==> (reserved) [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000001000 (usable) [ 0.000000] modified: 0000000000001000 - 0000000000006000 (reserved) [ 0.000000] modified: 0000000000006000 - 000000000009d800 (usable) [ 0.000000] modified: 000000000009d800 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000d2000 - 00000000000d4000 (reserved) [ 0.000000] modified: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 000000007d6b0000 (usable) [ 0.000000] modified: 000000007d6b0000 - 000000007d6cc000 (ACPI data) [ 0.000000] modified: 000000007d6cc000 - 000000007d700000 (ACPI NVS) [ 0.000000] modified: 000000007d700000 - 000000007e000000 (reserved) [ 0.000000] modified: 00000000f0000000 - 00000000f4000000 (reserved) [ 0.000000] modified: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] modified: 00000000fed00000 - 00000000fed00400 (reserved) [ 0.000000] modified: 00000000fed14000 - 00000000fed1a000 (reserved) [ 0.000000] modified: 00000000fed1c000 - 00000000fed90000 (reserved) [ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] modified: 00000000ff000000 - 0000000100000000 (reserved) [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] init_memory_mapping: 0000000000000000-000000007d6b0000 [ 0.000000] 0000000000 - 007d600000 page 2M [ 0.000000] 007d600000 - 007d6b0000 page 4k [ 0.000000] kernel direct mapping tables up to 7d6b0000 @ 8000-c000 [ 0.000000] RAMDISK: 37880000 - 37fefbac [ 0.000000] ACPI: RSDP 00000000000f6950 00024 (v02 LENOVO) [ 0.000000] ACPI: XSDT 000000007d6bd47a 00094 (v01 LENOVO TP-7N 00002160 LTP 00000000) [ 0.000000] ACPI: FACP 000000007d6bd600 000F4 (v03 LENOVO TP-7N 00002160 LNVO 00000001) [ 0.000000] ACPI Warning: 32/64X length mismatch in Gpe1Block: 0/32 20090521 tbfadt-527 [ 0.000000] ACPI Warning: Optional field Gpe1Block has zero address or length: 000000000000102C/0 20090521 tbfadt-558 [ 0.000000] ACPI: DSDT 000000007d6bd9db 0E218 (v01 LENOVO TP-7N 00002160 MSFT 03000000) [ 0.000000] ACPI: FACS 000000007d6e4000 00040 [ 0.000000] ACPI: SSDT 000000007d6bd7b4 00227 (v01 LENOVO TP-7N 00002160 MSFT 03000000) [ 0.000000] ACPI: ECDT 000000007d6cbbf3 00052 (v01 LENOVO TP-7N 00002160 LNVO 00000001) [ 0.000000] ACPI: TCPA 000000007d6cbc45 00032 (v02 LENOVO TP-7N 00002160 LNVO 00000001) [ 0.000000] ACPI: APIC 000000007d6cbc77 00068 (v01 LENOVO TP-7N 00002160 LNVO 00000001) [ 0.000000] ACPI: MCFG 000000007d6cbcdf 0003C (v01 LENOVO TP-7N 00002160 LNVO 00000001) [ 0.000000] ACPI: HPET 000000007d6cbd1b 00038 (v01 LENOVO TP-7N 00002160 LNVO 00000001) [ 0.000000] ACPI: SLIC 000000007d6cbdf0 00176 (v01 LENOVO TP-7N 00002160 LTP 00000000) [ 0.000000] ACPI: BOOT 000000007d6cbf66 00028 (v01 LENOVO TP-7N 00002160 LTP 00000001) [ 0.000000] ACPI: ASF! 000000007d6cbf8e 00072 (v16 LENOVO TP-7N 00002160 PTL 00000001) [ 0.000000] ACPI: SSDT 000000007d6e2697 0025F (v01 LENOVO TP-7N 00002160 INTL 20050513) [ 0.000000] ACPI: SSDT 000000007d6e28f6 000A6 (v01 LENOVO TP-7N 00002160 INTL 20050513) [ 0.000000] ACPI: SSDT 000000007d6e299c 004F7 (v01 LENOVO TP-7N 00002160 INTL 20050513) [ 0.000000] ACPI: SSDT 000000007d6e2e93 001D8 (v01 LENOVO TP-7N 00002160 INTL 20050513) [ 0.000000] ACPI: DMI detected: Lenovo ThinkPad X61 [ 0.000000] ACPI: Added _OSI(Linux) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-000000007d6b0000 [ 0.000000] Bootmem setup node 0 0000000000000000-000000007d6b0000 [ 0.000000] NODE_DATA [000000000000a000 - 0000000000021fff] [ 0.000000] bootmap [0000000000022000 - 0000000000031ad7] pages 10 [ 0.000000] (7 early reservations) ==> bootmem [0000000000 - 007d6b0000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] [ 0.000000] #2 [0001000000 - 0001c4bf70] TEXT DATA BSS ==> [0001000000 - 0001c4bf70] [ 0.000000] #3 [0037880000 - 0037fefbac] RAMDISK ==> [0037880000 - 0037fefbac] [ 0.000000] #4 [000009d800 - 0000100000] BIOS reserved ==> [000009d800 - 0000100000] [ 0.000000] #5 [0001c4c000 - 0001c4c14c] BRK ==> [0001c4c000 - 0001c4c14c] [ 0.000000] #6 [0000008000 - 000000a000] PGTABLE ==> [0000008000 - 000000a000] [ 0.000000] found SMP MP-table at [ffff8800000f6980] f6980 [ 0.000000] [ffffea0000000000-ffffea0001bfffff] PMD -> [ffff880002200000- ffff880003dfffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00100000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x00000001 [ 0.000000] 0: 0x00000006 -> 0x0000009d [ 0.000000] 0: 0x00000100 -> 0x0007d6b0 [ 0.000000] On node 0 totalpages: 513608 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 103 pages reserved [ 0.000000] DMA zone: 3833 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 6968 pages used for memmap [ 0.000000] DMA32 zone: 502648 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 0000000000001000 - 0000000000006000 [ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000 [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000 [ 0.000000] PM: Registered nosave memory: 00000000000d2000 - 00000000000d4000 [ 0.000000] PM: Registered nosave memory: 00000000000d4000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 7e000000 (gap: 7e000000:72000000) [ 0.000000] NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 28 pages at ffff880001c80000, static data 82784 bytes [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 506481 [ 0.000000] Policy zone: DMA32 [ 0.000000] Kernel command line: root=/dev/disk/by-id/ata- ST9120822AS_5LZ2112B-part7 resume=/dev/disk/by-id/ata-ST9120822AS_5LZ2112B- part5 splash=silent quiet i915.modeset=1 vga=0x317 [ 0.000000] bootsplash: silent mode. [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 2004940k/2054848k available (5498k kernel code, 416k absent, 49492k reserved, 4472k data, 980k init) [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:4352 nr_irqs:424 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 1396.423 MHz processor. [ 0.000139] Console: colour dummy device 80x25 [ 0.000144] console [tty0] enabled [ 0.000412] hpet clockevent registered [ 0.000418] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.000428] Calibrating delay loop (skipped), value calculated using timer frequency.. 2792.84 BogoMIPS (lpj=1396423) [ 0.002775] kdb version 4.4 by Keith Owens, Scott Lurndal. Copyright SGI, All Rights Reserved [ 0.002927] Security Framework initialized [ 0.002957] AppArmor: AppArmor initialized [ 0.003261] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.004593] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.005509] Mount-cache hash table entries: 256 [ 0.006207] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.006211] CPU: L2 cache: 4096K [ 0.006216] CPU 0/0x0 -> Node 0 [ 0.006219] CPU: Physical Processor ID: 0 [ 0.006222] CPU: Processor Core ID: 0 [ 0.006226] mce: CPU supports 6 MCE banks [ 0.006237] CPU0: Thermal monitoring enabled (TM2) [ 0.006242] using mwait in idle threads. [ 0.006244] Performance Counters: Core2 events, Intel PMU driver. [ 0.006252] ... version: 2 [ 0.006254] ... bit width: 40 [ 0.006256] ... generic counters: 2 [ 0.006258] ... value mask: 000000ffffffffff [ 0.006261] ... max period: 000000007fffffff [ 0.006263] ... fixed-purpose counters: 3 [ 0.006265] ... counter mask: 0000000700000003 [ 0.007663] Unpacking initramfs... [ 0.015027] BUG: scheduling while atomic: swapper/0/0x10000002 [ 0.015037] Modules linked in: [ 0.015042] Pid: 0, comm: swapper Not tainted 2.6.31.8-0.0.0.0.239ecb7- desktop #1 [ 0.015045] Call Trace: [ 0.015063] [<ffffffff81011a19>] try_stack_unwind+0x189/0x1b0 [ 0.015071] [<ffffffff8101025d>] dump_trace+0xad/0x3a0 [ 0.015078] [<ffffffff81011524>] show_trace_log_lvl+0x64/0x90 [ 0.015085] [<ffffffff81011573>] show_trace+0x23/0x40 [ 0.015093] [<ffffffff81552302>] dump_stack+0x81/0x9e [ 0.015101] [<ffffffff81056ef2>] __schedule_bug+0x92/0xa0 [ 0.015108] [<ffffffff8155323f>] thread_return+0x2a7/0x3c8 [ 0.015115] [<ffffffff81060d88>] __cond_resched+0x38/0x80 [ 0.015121] [<ffffffff815534fd>] _cond_resched+0x4d/0x60 [ 0.015128] [<ffffffff81100dfa>] generic_perform_write+0x15a/0x220 [ 0.015135] [<ffffffff81100f50>] generic_file_buffered_write+0x90/0x160 [ 0.015141] [<ffffffff8110170f>] __generic_file_aio_write_nolock+0x28f/0x4d0 [ 0.015148] [<ffffffff81101aaf>] generic_file_aio_write+0x7f/0x110 [ 0.015155] [<ffffffff8114bb12>] do_sync_write+0x102/0x160 [ 0.015161] [<ffffffff8114be98>] vfs_write+0xd8/0x1c0 [ 0.015167] [<ffffffff8114c82b>] sys_write+0x5b/0xa0 [ 0.015175] [<ffffffff819d508d>] do_copy+0x97/0xd7 [ 0.015182] [<ffffffff819d49c9>] flush_buffer+0x8c/0xc8 [ 0.015188] [<ffffffff81a01140>] gunzip+0x425/0x500 [ 0.015196] [<ffffffff819d4ed1>] unpack_to_rootfs+0x2f6/0x41b [ 0.015202] [<ffffffff819d59e3>] populate_rootfs+0x72/0x13a [ 0.015208] [<ffffffff819d3639>] start_kernel+0x3bf/0x3e6 [ 0.015214] [<ffffffff819d268d>] x86_64_start_reservations+0x134/0x14f [ 0.015221] [<ffffffff819d2803>] x86_64_start_kernel+0x15b/0x17e [ 0.024041] BUG: scheduling while atomic: swapper/0/0x10000002 [ 0.024050] Modules linked in: [ 0.024055] Pid: 0, comm: swapper Not tainted 2.6.31.8-0.0.0.0.239ecb7- desktop #1 [ 0.024058] Call Trace: [ 0.024069] [<ffffffff81011a19>] try_stack_unwind+0x189/0x1b0 [ 0.024076] [<ffffffff8101025d>] dump_trace+0xad/0x3a0 [ 0.024083] [<ffffffff81011524>] show_trace_log_lvl+0x64/0x90 [ 0.024089] [<ffffffff81011573>] show_trace+0x23/0x40 [ 0.024095] [<ffffffff81552302>] dump_stack+0x81/0x9e [ 0.024102] [<ffffffff81056ef2>] __schedule_bug+0x92/0xa0 [ 0.024108] [<ffffffff8155323f>] thread_return+0x2a7/0x3c8 [ 0.024115] [<ffffffff81060d88>] __cond_resched+0x38/0x80 [ 0.024121] [<ffffffff815534fd>] _cond_resched+0x4d/0x60 [ 0.024127] [<ffffffff81100dfa>] generic_perform_write+0x15a/0x220 [ 0.024133] [<ffffffff81100f50>] generic_file_buffered_write+0x90/0x160 [ 0.024140] [<ffffffff8110170f>] __generic_file_aio_write_nolock+0x28f/0x4d0 [ 0.024146] [<ffffffff81101aaf>] generic_file_aio_write+0x7f/0x110 [ 0.024153] [<ffffffff8114bb12>] do_sync_write+0x102/0x160 [ 0.024159] [<ffffffff8114be98>] vfs_write+0xd8/0x1c0 [ 0.024164] [<ffffffff8114c82b>] sys_write+0x5b/0xa0 [ 0.024171] [<ffffffff819d508d>] do_copy+0x97/0xd7 [ 0.024177] [<ffffffff819d49c9>] flush_buffer+0x8c/0xc8 [ 0.024182] [<ffffffff81a01140>] gunzip+0x425/0x500 [ 0.024189] [<ffffffff819d4ed1>] unpack_to_rootfs+0x2f6/0x41b [ 0.024195] [<ffffffff819d59e3>] populate_rootfs+0x72/0x13a [ 0.024201] [<ffffffff819d3639>] start_kernel+0x3bf/0x3e6 [ 0.024208] [<ffffffff819d268d>] x86_64_start_reservations+0x134/0x14f [ 0.024214] [<ffffffff819d2803>] x86_64_start_kernel+0x15b/0x17e [ 0.033257] BUG: scheduling while atomic: swapper/0/0x10000002 [ 0.033266] Modules linked in: [ 0.033271] Pid: 0, comm: swapper Not tainted 2.6.31.8-0.0.0.0.239ecb7- desktop #1 [ 0.033274] Call Trace: [ 0.033284] [<ffffffff81011a19>] try_stack_unwind+0x189/0x1b0 [ 0.033292] [<ffffffff8101025d>] dump_trace+0xad/0x3a0 [ 0.033298] [<ffffffff81011524>] show_trace_log_lvl+0x64/0x90 [ 0.033305] [<ffffffff81011573>] show_trace+0x23/0x40 [ 0.033311] [<ffffffff81552302>] dump_stack+0x81/0x9e [ 0.033318] [<ffffffff81056ef2>] __schedule_bug+0x92/0xa0 [ 0.033324] [<ffffffff8155323f>] thread_return+0x2a7/0x3c8 [ 0.033331] [<ffffffff81060d88>] __cond_resched+0x38/0x80 [ 0.033337] [<ffffffff815534fd>] _cond_resched+0x4d/0x60 [ 0.033343] [<ffffffff81100dfa>] generic_perform_write+0x15a/0x220 [ 0.033349] [<ffffffff81100f50>] generic_file_buffered_write+0x90/0x160 [ 0.033356] [<ffffffff8110170f>] __generic_file_aio_write_nolock+0x28f/0x4d0 [ 0.033362] [<ffffffff81101aaf>] generic_file_aio_write+0x7f/0x110 [ 0.033369] [<ffffffff8114bb12>] do_sync_write+0x102/0x160 [ 0.033375] [<ffffffff8114be98>] vfs_write+0xd8/0x1c0 [ 0.033380] [<ffffffff8114c82b>] sys_write+0x5b/0xa0 [ 0.033387] [<ffffffff819d508d>] do_copy+0x97/0xd7 [ 0.033393] [<ffffffff819d49c9>] flush_buffer+0x8c/0xc8 [ 0.033399] [<ffffffff81a01140>] gunzip+0x425/0x500 [ 0.033406] [<ffffffff819d4ed1>] unpack_to_rootfs+0x2f6/0x41b [ 0.033412] [<ffffffff819d59e3>] populate_rootfs+0x72/0x13a [ 0.033418] [<ffffffff819d3639>] start_kernel+0x3bf/0x3e6 [ 0.033424] [<ffffffff819d268d>] x86_64_start_reservations+0x134/0x14f [ 0.033431] [<ffffffff819d2803>] x86_64_start_kernel+0x15b/0x17e [ 0.042005] BUG: scheduling while atomic: swapper/0/0x10000002 [ 0.042013] Modules linked in: [ 0.042018] Pid: 0, comm: swapper Not tainted 2.6.31.8-0.0.0.0.239ecb7- desktop #1 [ 0.042021] Call Trace: [ 0.042032] [<ffffffff81011a19>] try_stack_unwind+0x189/0x1b0 [ 0.042039] [<ffffffff8101025d>] dump_trace+0xad/0x3a0 [ 0.042046] [<ffffffff81011524>] show_trace_log_lvl+0x64/0x90 [ 0.042052] [<ffffffff81011573>] show_trace+0x23/0x40 [ 0.042058] [<ffffffff81552302>] dump_stack+0x81/0x9e [ 0.042065] [<ffffffff81056ef2>] __schedule_bug+0x92/0xa0 [ 0.042072] [<ffffffff8155323f>] thread_return+0x2a7/0x3c8 [ 0.042078] [<ffffffff81060d88>] __cond_resched+0x38/0x80 [ 0.042084] [<ffffffff815534fd>] _cond_resched+0x4d/0x60 [ 0.042090] [<ffffffff81100dfa>] generic_perform_write+0x15a/0x220 [ 0.042097] [<ffffffff81100f50>] generic_file_buffered_write+0x90/0x160 [ 0.042103] [<ffffffff8110170f>] __generic_file_aio_write_nolock+0x28f/0x4d0 [ 0.042110] [<ffffffff81101aaf>] generic_file_aio_write+0x7f/0x110 [ 0.042116] [<ffffffff8114bb12>] do_sync_write+0x102/0x160 [ 0.042122] [<ffffffff8114be98>] vfs_write+0xd8/0x1c0 [ 0.042128] [<ffffffff8114c82b>] sys_write+0x5b/0xa0 [ 0.042134] [<ffffffff819d508d>] do_copy+0x97/0xd7 [ 0.042141] [<ffffffff819d49c9>] flush_buffer+0x8c/0xc8 [ 0.042146] [<ffffffff81a01140>] gunzip+0x425/0x500 [ 0.042153] [<ffffffff819d4ed1>] unpack_to_rootfs+0x2f6/0x41b [ 0.042159] [<ffffffff819d59e3>] populate_rootfs+0x72/0x13a [ 0.042165] [<ffffffff819d3639>] start_kernel+0x3bf/0x3e6 [ 0.042172] [<ffffffff819d268d>] x86_64_start_reservations+0x134/0x14f [ 0.042178] [<ffffffff819d2803>] x86_64_start_kernel+0x15b/0x17e [ 0.051073] BUG: scheduling while atomic: swapper/0/0x10000002 [ 0.051082] Modules linked in: [ 0.051087] Pid: 0, comm: swapper Not tainted 2.6.31.8-0.0.0.0.239ecb7- desktop #1 [ 0.051089] Call Trace: [ 0.051101] [<ffffffff81011a19>] try_stack_unwind+0x189/0x1b0 [ 0.051108] [<ffffffff8101025d>] dump_trace+0xad/0x3a0 [ 0.051114] [<ffffffff81011524>] show_trace_log_lvl+0x64/0x90 [ 0.051120] [<ffffffff81011573>] show_trace+0x23/0x40 [ 0.051127] [<ffffffff81552302>] dump_stack+0x81/0x9e [ 0.051134] [<ffffffff81056ef2>] __schedule_bug+0x92/0xa0 [ 0.051140] [<ffffffff8155323f>] thread_return+0x2a7/0x3c8 [ 0.051146] [<ffffffff81060d88>] __cond_resched+0x38/0x80 [ 0.051152] [<ffffffff815534fd>] _cond_resched+0x4d/0x60 [ 0.051158] [<ffffffff81100dfa>] generic_perform_write+0x15a/0x220 [ 0.051165] [<ffffffff81100f50>] generic_file_buffered_write+0x90/0x160 [ 0.051171] [<ffffffff8110170f>] __generic_file_aio_write_nolock+0x28f/0x4d0 [ 0.051178] [<ffffffff81101aaf>] generic_file_aio_write+0x7f/0x110 [ 0.051184] [<ffffffff8114bb12>] do_sync_write+0x102/0x160 [ 0.051190] [<ffffffff8114be98>] vfs_write+0xd8/0x1c0 [ 0.051196] [<ffffffff8114c82b>] sys_write+0x5b/0xa0 [ 0.051202] [<ffffffff819d508d>] do_copy+0x97/0xd7 [ 0.051208] [<ffffffff819d49c9>] flush_buffer+0x8c/0xc8 [ 0.051214] [<ffffffff81a01140>] gunzip+0x425/0x500 [ 0.051221] [<ffffffff819d4ed1>] unpack_to_rootfs+0x2f6/0x41b [ 0.051227] [<ffffffff819d59e3>] populate_rootfs+0x72/0x13a [ 0.051233] [<ffffffff819d3639>] start_kernel+0x3bf/0x3e6 [ 0.051240] [<ffffffff819d268d>] x86_64_start_reservations+0x134/0x14f [ 0.051246] [<ffffffff819d2803>] x86_64_start_kernel+0x15b/0x17e [ 0.061078] BUG: scheduling while atomic: swapper/0/0x10000002 [ 0.061087] Modules linked in: [ 0.061091] Pid: 0, comm: swapper Not tainted 2.6.31.8-0.0.0.0.239ecb7- desktop #1 [ 0.061095] Call Trace: [ 0.061107] [<ffffffff81011a19>] try_stack_unwind+0x189/0x1b0 [ 0.061114] [<ffffffff8101025d>] dump_trace+0xad/0x3a0 [ 0.061121] [<ffffffff81011524>] show_trace_log_lvl+0x64/0x90 [ 0.061127] [<ffffffff81011573>] show_trace+0x23/0x40 [ 0.061134] [<ffffffff81552302>] dump_stack+0x81/0x9e [ 0.061140] [<ffffffff81056ef2>] __schedule_bug+0x92/0xa0 [ 0.061147] [<ffffffff8155323f>] thread_return+0x2a7/0x3c8 [ 0.061153] [<ffffffff81060d88>] __cond_resched+0x38/0x80 [ 0.061159] [<ffffffff815534fd>] _cond_resched+0x4d/0x60 [ 0.061165] [<ffffffff81100dfa>] generic_perform_write+0x15a/0x220 [ 0.061172] [<ffffffff81100f50>] generic_file_buffered_write+0x90/0x160 [ 0.061179] [<ffffffff8110170f>] __generic_file_aio_write_nolock+0x28f/0x4d0 [ 0.061185] [<ffffffff81101aaf>] generic_file_aio_write+0x7f/0x110 [ 0.061191] [<ffffffff8114bb12>] do_sync_write+0x102/0x160 [ 0.061197] [<ffffffff8114be98>] vfs_write+0xd8/0x1c0 [ 0.061203] [<ffffffff8114c82b>] sys_write+0x5b/0xa0 [ 0.061210] [<ffffffff819d508d>] do_copy+0x97/0xd7 [ 0.061216] [<ffffffff819d49c9>] flush_buffer+0x8c/0xc8 [ 0.061222] [<ffffffff81a01140>] gunzip+0x425/0x500 [ 0.061229] [<ffffffff819d4ed1>] unpack_to_rootfs+0x2f6/0x41b [ 0.061235] [<ffffffff819d59e3>] populate_rootfs+0x72/0x13a [ 0.061241] [<ffffffff819d3639>] start_kernel+0x3bf/0x3e6 [ 0.061247] [<ffffffff819d268d>] x86_64_start_reservations+0x134/0x14f [ 0.061253] [<ffffffff819d2803>] x86_64_start_kernel+0x15b/0x17e [ 0.070254] BUG: scheduling while atomic: swapper/0/0x10000002 [ 0.070263] Modules linked in: [ 0.070268] Pid: 0, comm: swapper Not tainted 2.6.31.8-0.0.0.0.239ecb7- desktop #1 [ 0.070271] Call Trace: [ 0.070285] [<ffffffff81011a19>] try_stack_unwind+0x189/0x1b0 [ 0.070292] [<ffffffff8101025d>] dump_trace+0xad/0x3a0 [ 0.070299] [<ffffffff81011524>] show_trace_log_lvl+0x64/0x90 [ 0.070305] [<ffffffff81011573>] show_trace+0x23/0x40 [ 0.070312] [<ffffffff81552302>] dump_stack+0x81/0x9e [ 0.070319] [<ffffffff81056ef2>] __schedule_bug+0x92/0xa0 [ 0.070326] [<ffffffff8155323f>] thread_return+0x2a7/0x3c8 [ 0.070333] [<ffffffff81060d88>] __cond_resched+0x38/0x80 [ 0.070339] [<ffffffff815534fd>] _cond_resched+0x4d/0x60 [ 0.070345] [<ffffffff81100dfa>] generic_perform_write+0x15a/0x220 [ 0.070352] [<ffffffff81100f50>] generic_file_buffered_write+0x90/0x160 [ 0.070358] [<ffffffff8110170f>] __generic_file_aio_write_nolock+0x28f/0x4d0 [ 0.070365] [<ffffffff81101aaf>] generic_file_aio_write+0x7f/0x110 [ 0.070371] [<ffffffff8114bb12>] do_sync_write+0x102/0x160 [ 0.070377] [<ffffffff8114be98>] vfs_write+0xd8/0x1c0 [ 0.070383] [<ffffffff8114c82b>] sys_write+0x5b/0xa0 [ 0.070390] [<ffffffff819d5034>] do_copy+0x3e/0xd7 [ 0.070396] [<ffffffff819d49c9>] flush_buffer+0x8c/0xc8 [ 0.070403] [<ffffffff81a01140>] gunzip+0x425/0x500 [ 0.070410] [<ffffffff819d4ed1>] unpack_to_rootfs+0x2f6/0x41b [ 0.070415] [<ffffffff819d59e3>] populate_rootfs+0x72/0x13a [ 0.070421] [<ffffffff819d3639>] start_kernel+0x3bf/0x3e6 [ 0.070428] [<ffffffff819d268d>] x86_64_start_reservations+0x134/0x14f [ 0.070434] [<ffffffff819d2803>] x86_64_start_kernel+0x15b/0x17e [ 0.079039] BUG: scheduling while atomic: swapper/0/0x10000002 [ 0.079048] Modules linked in: [ 0.079053] Pid: 0, comm: swapper Not tainted 2.6.31.8-0.0.0.0.239ecb7- desktop #1 [ 0.079056] Call Trace: [ 0.079066] [<ffffffff81011a19>] try_stack_unwind+0x189/0x1b0 [ 0.079073] [<ffffffff8101025d>] dump_trace+0xad/0x3a0 [ 0.079079] [<ffffffff81011524>] show_trace_log_lvl+0x64/0x90 [ 0.079086] [<ffffffff81011573>] show_trace+0x23/0x40 [ 0.079092] [<ffffffff81552302>] dump_stack+0x81/0x9e [ 0.079099] [<ffffffff81056ef2>] __schedule_bug+0x92/0xa0 [ 0.079105] [<ffffffff8155323f>] thread_return+0x2a7/0x3c8 [ 0.079112] [<ffffffff81060d88>] __cond_resched+0x38/0x80 [ 0.079118] [<ffffffff815534fd>] _cond_resched+0x4d/0x60 [ 0.079124] [<ffffffff81100dfa>] generic_perform_write+0x15a/0x220 [ 0.079130] [<ffffffff81100f50>] generic_file_buffered_write+0x90/0x160 [ 0.079137] [<ffffffff8110170f>] __generic_file_aio_write_nolock+0x28f/0x4d0 [ 0.079143] [<ffffffff81101aaf>] generic_file_aio_write+0x7f/0x110 [ 0.079149] [<ffffffff8114bb12>] do_sync_write+0x102/0x160 [ 0.079156] [<ffffffff8114be98>] vfs_write+0xd8/0x1c0 [ 0.079161] [<ffffffff8114c82b>] sys_write+0x5b/0xa0 [ 0.079168] [<ffffffff819d508d>] do_copy+0x97/0xd7 [ 0.079174] [<ffffffff819d49c9>] flush_buffer+0x8c/0xc8 [ 0.079180] [<ffffffff81a01140>] gunzip+0x425/0x500 [ 0.079187] [<ffffffff819d4ed1>] unpack_to_rootfs+0x2f6/0x41b [ 0.079192] [<ffffffff819d59e3>] populate_rootfs+0x72/0x13a [ 0.079198] [<ffffffff819d3639>] start_kernel+0x3bf/0x3e6 [ 0.079205] [<ffffffff819d268d>] x86_64_start_reservations+0x134/0x14f [ 0.079211] [<ffffffff819d2803>] x86_64_start_kernel+0x15b/0x17e [ 0.088125] BUG: scheduling while atomic: swapper/0/0x10000002 [ 0.088133] Modules linked in: [ 0.088138] Pid: 0, comm: swapper Not tainted 2.6.31.8-0.0.0.0.239ecb7- desktop #1 [ 0.088140] Call Trace: [ 0.088151] [<ffffffff81011a19>] try_stack_unwind+0x189/0x1b0 [ 0.088158] [<ffffffff8101025d>] dump_trace+0xad/0x3a0 [ 0.088164] [<ffffffff81011524>] show_trace_log_lvl+0x64/0x90 [ 0.088171] [<ffffffff81011573>] show_trace+0x23/0x40 [ 0.088177] [<ffffffff81552302>] dump_stack+0x81/0x9e [ 0.088184] [<ffffffff81056ef2>] __schedule_bug+0x92/0xa0 [ 0.088190] [<ffffffff8155323f>] thread_return+0x2a7/0x3c8 [ 0.088197] [<ffffffff81060d88>] __cond_resched+0x38/0x80 [ 0.088203] [<ffffffff815534fd>] _cond_resched+0x4d/0x60 [ 0.088209] [<ffffffff81100dfa>] generic_perform_write+0x15a/0x220 [ 0.088215] [<ffffffff81100f50>] generic_file_buffered_write+0x90/0x160 [ 0.088222] [<ffffffff8110170f>] __generic_file_aio_write_nolock+0x28f/0x4d0 [ 0.088229] [<ffffffff81101aaf>] generic_file_aio_write+0x7f/0x110 [ 0.088235] [<ffffffff8114bb12>] do_sync_write+0x102/0x160 [ 0.088241] [<ffffffff8114be98>] vfs_write+0xd8/0x1c0 [ 0.088246] [<ffffffff8114c82b>] sys_write+0x5b/0xa0 [ 0.088253] [<ffffffff819d508d>] do_copy+0x97/0xd7 [ 0.088259] [<ffffffff819d49c9>] flush_buffer+0x8c/0xc8 [ 0.088265] [<ffffffff81a01140>] gunzip+0x425/0x500 [ 0.088272] [<ffffffff819d4ed1>] unpack_to_rootfs+0x2f6/0x41b [ 0.088278] [<ffffffff819d59e3>] populate_rootfs+0x72/0x13a [ 0.088284] [<ffffffff819d3639>] start_kernel+0x3bf/0x3e6 [ 0.088290] [<ffffffff819d268d>] x86_64_start_reservations+0x134/0x14f [ 0.088296] [<ffffffff819d2803>] x86_64_start_kernel+0x15b/0x17e [ 0.097354] BUG: scheduling while atomic: swapper/0/0x10000002 [ 0.097363] Modules linked in: [ 0.097367] Pid: 0, comm: swapper Not tainted 2.6.31.8-0.0.0.0.239ecb7- desktop #1 [ 0.097370] Call Trace: [ 0.097381] [<ffffffff81011a19>] try_stack_unwind+0x189/0x1b0 [ 0.097388] [<ffffffff8101025d>] dump_trace+0xad/0x3a0 [ 0.097395] [<ffffffff81011524>] show_trace_log_lvl+0x64/0x90 [ 0.097401] [<ffffffff81011573>] show_trace+0x23/0x40 [ 0.097408] [<ffffffff81552302>] dump_stack+0x81/0x9e [ 0.097414] [<ffffffff81056ef2>] __schedule_bug+0x92/0xa0 [ 0.097421] [<ffffffff8155323f>] thread_return+0x2a7/0x3c8 [ 0.097427] [<ffffffff81060d88>] __cond_resched+0x38/0x80 [ 0.097433] [<ffffffff815534fd>] _cond_resched+0x4d/0x60 [ 0.097439] [<ffffffff81100dfa>] generic_perform_write+0x15a/0x220 [ 0.097446] [<ffffffff81100f50>] generic_file_buffered_write+0x90/0x160 [ 0.097452] [<ffffffff8110170f>] __generic_file_aio_write_nolock+0x28f/0x4d0 [ 0.097459] [<ffffffff81101aaf>] generic_file_aio_write+0x7f/0x110 [ 0.097465] [<ffffffff8114bb12>] do_sync_write+0x102/0x160 [ 0.097471] [<ffffffff8114be98>] vfs_write+0xd8/0x1c0 [ 0.097477] [<ffffffff8114c82b>] sys_write+0x5b/0xa0 [ 0.097484] [<ffffffff819d508d>] do_copy+0x97/0xd7 [ 0.097490] [<ffffffff819d49c9>] flush_buffer+0x8c/0xc8 [ 0.097495] [<ffffffff81a01140>] gunzip+0x425/0x500 [ 0.097503] [<ffffffff819d4ed1>] unpack_to_rootfs+0x2f6/0x41b [ 0.097508] [<ffffffff819d59e3>] populate_rootfs+0x72/0x13a [ 0.097515] [<ffffffff819d3639>] start_kernel+0x3bf/0x3e6 [ 0.097521] [<ffffffff819d268d>] x86_64_start_reservations+0x134/0x14f [ 0.097527] [<ffffffff819d2803>] x86_64_start_kernel+0x15b/0x17e [ 0.106281] BUG: scheduling while atomic: swapper/0/0x10000002 [ 0.106289] Modules linked in: [ 0.106294] Pid: 0, comm: swapper Not tainted 2.6.31.8-0.0.0.0.239ecb7- desktop #1 [ 0.106297] Call Trace: [ 0.106308] [<ffffffff81011a19>] try_stack_unwind+0x189/0x1b0 [ 0.106314] [<ffffffff8101025d>] dump_trace+0xad/0x3a0 [ 0.106321] [<ffffffff81011524>] show_trace_log_lvl+0x64/0x90 [ 0.106327] [<ffffffff81011573>] show_trace+0x23/0x40 [ 0.106333] [<ffffffff81552302>] dump_stack+0x81/0x9e [ 0.106340] [<ffffffff81056ef2>] __schedule_bug+0x92/0xa0 [ 0.106346] [<ffffffff8155323f>] thread_return+0x2a7/0x3c8 [ 0.106353] [<ffffffff81060d88>] __cond_resched+0x38/0x80 [ 0.106359] [<ffffffff815534fd>] _cond_resched+0x4d/0x60 [ 0.106365] [<ffffffff81100dfa>] generic_perform_write+0x15a/0x220 [ 0.106372] [<ffffffff81100f50>] generic_file_buffered_write+0x90/0x160 [ 0.106378] [<ffffffff8110170f>] __generic_file_aio_write_nolock+0x28f/0x4d0 [ 0.106385] [<ffffffff81101aaf>] generic_file_aio_write+0x7f/0x110 [ 0.106391] [<ffffffff8114bb12>] do_sync_write+0x102/0x160 [ 0.106397] [<ffffffff8114be98>] vfs_write+0xd8/0x1c0 [ 0.106403] [<ffffffff8114c82b>] sys_write+0x5b/0xa0 [ 0.106409] [<ffffffff819d508d>] do_copy+0x97/0xd7 [ 0.106416] [<ffffffff819d49c9>] flush_buffer+0x8c/0xc8 [ 0.106421] [<ffffffff81a01140>] gunzip+0x425/0x500 [ 0.106428] [<ffffffff819d4ed1>] unpack_to_rootfs+0x2f6/0x41b [ 0.106434] [<ffffffff819d59e3>] populate_rootfs+0x72/0x13a [ 0.106440] [<ffffffff819d3639>] start_kernel+0x3bf/0x3e6 [ 0.106447] [<ffffffff819d268d>] x86_64_start_reservations+0x134/0x14f [ 0.106453] [<ffffffff819d2803>] x86_64_start_kernel+0x15b/0x17e [ 0.114994] BUG: scheduling while atomic: swapper/0/0x10000002 [ 0.115002] Modules linked in: [ 0.115006] Pid: 0, comm: swapper Not tainted 2.6.31.8-0.0.0.0.239ecb7- desktop #1 [ 0.115009] Call Trace: [ 0.115019] [<ffffffff81011a19>] try_stack_unwind+0x189/0x1b0 [ 0.115026] [<ffffffff8101025d>] dump_trace+0xad/0x3a0 [ 0.115033] [<ffffffff81011524>] show_trace_log_lvl+0x64/0x90 [ 0.115039] [<ffffffff81011573>] show_trace+0x23/0x40 [ 0.115045] [<ffffffff81552302>] dump_stack+0x81/0x9e [ 0.115052] [<ffffffff81056ef2>] __schedule_bug+0x92/0xa0 [ 0.115058] [<ffffffff8155323f>] thread_return+0x2a7/0x3c8 [ 0.115065] [<ffffffff81060d88>] __cond_resched+0x38/0x80 [ 0.115070] [<ffffffff815534fd>] _cond_resched+0x4d/0x60 [ 0.115076] [<ffffffff81100dfa>] generic_perform_write+0x15a/0x220 [ 0.115083] [<ffffffff81100f50>] generic_file_buffered_write+0x90/0x160 [ 0.115089] [<ffffffff8110170f>] __generic_file_aio_write_nolock+0x28f/0x4d0 [ 0.115096] [<ffffffff81101aaf>] generic_file_aio_write+0x7f/0x110 [ 0.115102] [<ffffffff8114bb12>] do_sync_write+0x102/0x160 [ 0.115108] [<ffffffff8114be98>] vfs_write+0xd8/0x1c0 [ 0.115114] [<ffffffff8114c82b>] sys_write+0x5b/0xa0 [ 0.115120] [<ffffffff819d508d>] do_copy+0x97/0xd7 [ 0.115126] [<ffffffff819d49c9>] flush_buffer+0x8c/0xc8 [ 0.115132] [<ffffffff81a01140>] gunzip+0x425/0x500 [ 0.115139] [<ffffffff819d4ed1>] unpack_to_rootfs+0x2f6/0x41b [ 0.115145] [<ffffffff819d59e3>] populate_rootfs+0x72/0x13a [ 0.115151] [<ffffffff819d3639>] start_kernel+0x3bf/0x3e6 [ 0.115157] [<ffffffff819d268d>] x86_64_start_reservations+0x134/0x14f [ 0.115164] [<ffffffff819d2803>] x86_64_start_kernel+0x15b/0x17e [ 0.124232] BUG: scheduling while atomic: swapper/0/0x10000002 [ 0.124240] Modules linked in: [ 0.124244] Pid: 0, comm: swapper Not tainted 2.6.31.8-0.0.0.0.239ecb7- desktop #1 [ 0.124247] Call Trace: [ 0.124258] [<ffffffff81011a19>] try_stack_unwind+0x189/0x1b0 [ 0.124266] [<ffffffff8101025d>] dump_trace+0xad/0x3a0 [ 0.124272] [<ffffffff81011524>] show_trace_log_lvl+0x64/0x90 [ 0.124279] [<ffffffff81011573>] show_trace+0x23/0x40 [ 0.124285] [<ffffffff81552302>] dump_stack+0x81/0x9e [ 0.124292] [<ffffffff81056ef2>] __schedule_bug+0x92/0xa0 [ 0.124298] [<ffffffff8155323f>] thread_return+0x2a7/0x3c8 [ 0.124305] [<ffffffff81060d88>] __cond_resched+0x38/0x80 [ 0.124311] [<ffffffff815534fd>] _cond_resched+0x4d/0x60 [ 0.124317] [<ffffffff81100dfa>] generic_perform_write+0x15a/0x220 [ 0.124323] [<ffffffff81100f50>] generic_file_buffered_write+0x90/0x160 [ 0.124330] [<ffffffff8110170f>] __generic_file_aio_write_nolock+0x28f/0x4d0 [ 0.124336] [<ffffffff81101aaf>] generic_file_aio_write+0x7f/0x110 [ 0.124343] [<ffffffff8114bb12>] do_sync_write+0x102/0x160 [ 0.124349] [<ffffffff8114be98>] vfs_write+0xd8/0x1c0 [ 0.124354] [<ffffffff8114c82b>] sys_write+0x5b/0xa0 [ 0.124361] [<ffffffff819d508d>] do_copy+0x97/0xd7 [ 0.124367] [<ffffffff819d49c9>] flush_buffer+0x8c/0xc8 [ 0.124373] [<ffffffff81a01140>] gunzip+0x425/0x500 [ 0.124380] [<ffffffff819d4ed1>] unpack_to_rootfs+0x2f6/0x41b [ 0.124386] [<ffffffff819d59e3>] populate_rootfs+0x72/0x13a [ 0.124392] [<ffffffff819d3639>] start_kernel+0x3bf/0x3e6 [ 0.124399] [<ffffffff819d268d>] x86_64_start_reservations+0x134/0x14f [ 0.124405] [<ffffffff819d2803>] x86_64_start_kernel+0x15b/0x17e [ 0.137990] BUG: scheduling while atomic: swapper/0/0x10000002 [ 0.137999] Modules linked in: [ 0.138004] Pid: 0, comm: swapper Not tainted 2.6.31.8-0.0.0.0.239ecb7- desktop #1 [ 0.138007] Call Trace: [ 0.138020] [<ffffffff81011a19>] try_stack_unwind+0x189/0x1b0 [ 0.138027] [<ffffffff8101025d>] dump_trace+0xad/0x3a0 [ 0.138033] [<ffffffff81011524>] show_trace_log_lvl+0x64/0x90 [ 0.138040] [<ffffffff81011573>] show_trace+0x23/0x40 [ 0.138046] [<ffffffff81552302>] dump_stack+0x81/0x9e [ 0.138053] [<ffffffff81056ef2>] __schedule_bug+0x92/0xa0 [ 0.138060] [<ffffffff8155323f>] thread_return+0x2a7/0x3c8 [ 0.138066] [<ffffffff81060d88>] __cond_resched+0x38/0x80 [ 0.138072] [<ffffffff815534fd>] _cond_resched+0x4d/0x60 [ 0.138079] [<ffffffff81100dfa>] generic_perform_write+0x15a/0x220 [ 0.138085] [<ffffffff81100f50>] generic_file_buffered_write+0x90/0x160 [ 0.138092] [<ffffffff8110170f>] __generic_file_aio_write_nolock+0x28f/0x4d0 [ 0.138098] [<ffffffff81101aaf>] generic_file_aio_write+0x7f/0x110 [ 0.138105] [<ffffffff8114bb12>] do_sync_write+0x102/0x160 [ 0.138111] [<ffffffff8114be98>] vfs_write+0xd8/0x1c0 [ 0.138117] [<ffffffff8114c82b>] sys_write+0x5b/0xa0 [ 0.138124] [<ffffffff819d508d>] do_copy+0x97/0xd7 [ 0.138130] [<ffffffff819d49c9>] flush_buffer+0x8c/0xc8 [ 0.138136] [<ffffffff81a01140>] gunzip+0x425/0x500 [ 0.138143] [<ffffffff819d4ed1>] unpack_to_rootfs+0x2f6/0x41b [ 0.138149] [<ffffffff819d59e3>] populate_rootfs+0x72/0x13a [ 0.138155] [<ffffffff819d3639>] start_kernel+0x3bf/0x3e6 [ 0.138161] [<ffffffff819d268d>] x86_64_start_reservations+0x134/0x14f [ 0.138168] [<ffffffff819d2803>] x86_64_start_kernel+0x15b/0x17e [ 0.147210] BUG: scheduling while atomic: swapper/0/0x10000002 [ 0.147218] Modules linked in: [ 0.147223] Pid: 0, comm: swapper Not tainted 2.6.31.8-0.0.0.0.239ecb7- desktop #1 [ 0.147226] Call Trace: [ 0.147237] [<ffffffff81011a19>] try_stack_unwind+0x189/0x1b0 [ 0.147245] [<ffffffff8101025d>] dump_trace+0xad/0x3a0 [ 0.147251] [<ffffffff81011524>] show_trace_log_lvl+0x64/0x90 [ 0.147258] [<ffffffff81011573>] show_trace+0x23/0x40 [ 0.147264] [<ffffffff81552302>] dump_stack+0x81/0x9e [ 0.147272] [<ffffffff81056ef2>] __schedule_bug+0x92/0xa0 [ 0.147278] [<ffffffff8155323f>] thread_return+0x2a7/0x3c8 [ 0.147285] [<ffffffff81060d88>] __cond_resched+0x38/0x80 [ 0.147291] [<ffffffff815534fd>] _cond_resched+0x4d/0x60 [ 0.147297] [<ffffffff81100dfa>] generic_perform_write+0x15a/0x220 [ 0.147303] [<ffffffff81100f50>] generic_file_buffered_write+0x90/0x160 [ 0.147310] [<ffffffff8110170f>] __generic_file_aio_write_nolock+0x28f/0x4d0 [ 0.147316] [<ffffffff81101aaf>] generic_file_aio_write+0x7f/0x110 [ 0.147323] [<ffffffff8114bb12>] do_sync_write+0x102/0x160 [ 0.147329] [<ffffffff8114be98>] vfs_write+0xd8/0x1c0 [ 0.147335] [<ffffffff8114c82b>] sys_write+0x5b/0xa0 [ 0.147342] [<ffffffff819d5034>] do_copy+0x3e/0xd7 [ 0.147348] [<ffffffff819d49c9>] flush_buffer+0x8c/0xc8 [ 0.147354] [<ffffffff81a01140>] gunzip+0x425/0x500 [ 0.147361] [<ffffffff819d4ed1>] unpack_to_rootfs+0x2f6/0x41b [ 0.147367] [<ffffffff819d59e3>] populate_rootfs+0x72/0x13a [ 0.147373] [<ffffffff819d3639>] start_kernel+0x3bf/0x3e6 [ 0.147379] [<ffffffff819d268d>] x86_64_start_reservations+0x134/0x14f [ 0.147385] [<ffffffff819d2803>] x86_64_start_kernel+0x15b/0x17e [ 0.156009] BUG: scheduling while atomic: swapper/0/0x10000002 [ 0.156017] Modules linked in: [ 0.156022] Pid: 0, comm: swapper Not tainted 2.6.31.8-0.0.0.0.239ecb7- desktop #1 [ 0.156025] Call Trace: [ 0.156036] [<ffffffff81011a19>] try_stack_unwind+0x189/0x1b0 [ 0.156043] [<ffffffff8101025d>] dump_trace+0xad/0x3a0 [ 0.156050] [<ffffffff81011524>] show_trace_log_lvl+0x64/0x90 [ 0.156056] [<ffffffff81011573>] show_trace+0x23/0x40 [ 0.156063] [<ffffffff81552302>] dump_stack+0x81/0x9e [ 0.156070] [<ffffffff81056ef2>] __schedule_bug+0x92/0xa0 [ 0.156076] [<ffffffff8155323f>] thread_return+0x2a7/0x3c8 [ 0.156083] [<ffffffff81060d88>] __cond_resched+0x38/0x80 [ 0.156089] [<ffffffff815534fd>] _cond_resched+0x4d/0x60 [ 0.156095] [<ffffffff81100dfa>] generic_perform_write+0x15a/0x220 [ 0.156101] [<ffffffff81100f50>] generic_file_buffered_write+0x90/0x160 [ 0.156108] [<ffffffff8110170f>] __generic_file_aio_write_nolock+0x28f/0x4d0 [ 0.156114] [<ffffffff81101aaf>] generic_file_aio_write+0x7f/0x110 [ 0.156120] [<ffffffff8114bb12>] do_sync_write+0x102/0x160 [ 0.156127] [<ffffffff8114be98>] vfs_write+0xd8/0x1c0 [ 0.156132] [<ffffffff8114c82b>] sys_write+0x5b/0xa0 [ 0.156139] [<ffffffff819d508d>] do_copy+0x97/0xd7 [ 0.156145] [<ffffffff819d49c9>] flush_buffer+0x8c/0xc8 [ 0.156151] [<ffffffff81a01140>] gunzip+0x425/0x500 [ 0.156158] [<ffffffff819d4ed1>] unpack_to_rootfs+0x2f6/0x41b [ 0.156164] [<ffffffff819d59e3>] populate_rootfs+0x72/0x13a [ 0.156170] [<ffffffff819d3639>] start_kernel+0x3bf/0x3e6 [ 0.156176] [<ffffffff819d268d>] x86_64_start_reservations+0x134/0x14f [ 0.156183] [<ffffffff819d2803>] x86_64_start_kernel+0x15b/0x17e [ 0.165108] BUG: scheduling while atomic: swapper/0/0x10000002 [ 0.165116] Modules linked in: [ 0.165121] Pid: 0, comm: swapper Not tainted 2.6.31.8-0.0.0.0.239ecb7- desktop #1 [ 0.165124] Call Trace: [ 0.165135] [<ffffffff81011a19>] try_stack_unwind+0x189/0x1b0 [ 0.165142] [<ffffffff8101025d>] dump_trace+0xad/0x3a0 [ 0.165148] [<ffffffff81011524>] show_trace_log_lvl+0x64/0x90 [ 0.165155] [<ffffffff81011573>] show_trace+0x23/0x40 [ 0.165161] [<ffffffff81552302>] dump_stack+0x81/0x9e [ 0.165168] [<ffffffff81056ef2>] __schedule_bug+0x92/0xa0 [ 0.165174] [<ffffffff8155323f>] thread_return+0x2a7/0x3c8 [ 0.165181] [<ffffffff81060d88>] __cond_resched+0x38/0x80 [ 0.165187] [<ffffffff815534fd>] _cond_resched+0x4d/0x60 [ 0.165193] [<ffffffff81100dfa>] generic_perform_write+0x15a/0x220 [ 0.165200] [<ffffffff81100f50>] generic_file_buffered_write+0x90/0x160 [ 0.165206] [<ffffffff8110170f>] __generic_file_aio_write_nolock+0x28f/0x4d0 [ 0.165213] [<ffffffff81101aaf>] generic_file_aio_write+0x7f/0x110 [ 0.165219] [<ffffffff8114bb12>] do_sync_write+0x102/0x160 [ 0.165225] [<ffffffff8114be98>] vfs_write+0xd8/0x1c0 [ 0.165231] [<ffffffff8114c82b>] sys_write+0x5b/0xa0 [ 0.165238] [<ffffffff819d508d>] do_copy+0x97/0xd7 [ 0.165244] [<ffffffff819d49c9>] flush_buffer+0x8c/0xc8 [ 0.165249] [<ffffffff81a01140>] gunzip+0x425/0x500 [ 0.165256] [<ffffffff819d4ed1>] unpack_to_rootfs+0x2f6/0x41b [ 0.165262] [<ffffffff819d59e3>] populate_rootfs+0x72/0x13a [ 0.165268] [<ffffffff819d3639>] start_kernel+0x3bf/0x3e6 [ 0.165274] [<ffffffff819d268d>] x86_64_start_reservations+0x134/0x14f [ 0.165281] [<ffffffff819d2803>] x86_64_start_kernel+0x15b/0x17e [ 0.174201] BUG: scheduling while atomic: swapper/0/0x10000002 [ 0.174210] Modules linked in: [ 0.174215] Pid: 0, comm: swapper Not tainted 2.6.31.8-0.0.0.0.239ecb7- desktop #1 [ 0.174218] Call Trace: [ 0.174228] [<ffffffff81011a19>] try_stack_unwind+0x189/0x1b0 [ 0.174235] [<ffffffff8101025d>] dump_trace+0xad/0x3a0 [ 0.174242] [<ffffffff81011524>] show_trace_log_lvl+0x64/0x90 [ 0.174249] [<ffffffff81011573>] show_trace+0x23/0x40 [ 0.174255] [<ffffffff81552302>] dump_stack+0x81/0x9e [ 0.174262] [<ffffffff81056ef2>] __schedule_bug+0x92/0xa0 [ 0.174268] [<ffffffff8155323f>] thread_return+0x2a7/0x3c8 [ 0.174275] [<ffffffff81060d88>] __cond_resched+0x38/0x80 [ 0.174281] [<ffffffff815534fd>] _cond_resched+0x4d/0x60 [ 0.174287] [<ffffffff81100dfa>] generic_perform_write+0x15a/0x220 [ 0.174294] [<ffffffff81100f50>] generic_file_buffered_write+0x90/0x160 [ 0.174300] [<ffffffff8110170f>] __generic_file_aio_write_nolock+0x28f/0x4d0 [ 0.174307] [<ffffffff81101aaf>] generic_file_aio_write+0x7f/0x110 [ 0.174313] [<ffffffff8114bb12>] do_sync_write+0x102/0x160 [ 0.174319] [<ffffffff8114be98>] vfs_write+0xd8/0x1c0 [ 0.174324] [<ffffffff8114c82b>] sys_write+0x5b/0xa0 [ 0.174331] [<ffffffff819d508d>] do_copy+0x97/0xd7 [ 0.174337] [<ffffffff819d49c9>] flush_buffer+0x8c/0xc8 [ 0.174343] [<ffffffff81a01140>] gunzip+0x425/0x500 [ 0.174350] [<ffffffff819d4ed1>] unpack_to_rootfs+0x2f6/0x41b [ 0.174356] [<ffffffff819d59e3>] populate_rootfs+0x72/0x13a [ 0.174362] [<ffffffff819d3639>] start_kernel+0x3bf/0x3e6 [ 0.174368] [<ffffffff819d268d>] x86_64_start_reservations+0x134/0x14f [ 0.174374] [<ffffffff819d2803>] x86_64_start_kernel+0x15b/0x17e [ 0.183331] BUG: scheduling while atomic: swapper/0/0x10000002 [ 0.183339] Modules linked in: [ 0.183344] Pid: 0, comm: swapper Not tainted 2.6.31.8-0.0.0.0.239ecb7- desktop #1 [ 0.183347] Call Trace: [ 0.183358] [<ffffffff81011a19>] try_stack_unwind+0x189/0x1b0 [ 0.183365] [<ffffffff8101025d>] dump_trace+0xad/0x3a0 [ 0.183372] [<ffffffff81011524>] show_trace_log_lvl+0x64/0x90 [ 0.183378] [<ffffffff81011573>] show_trace+0x23/0x40 [ 0.183384] [<ffffffff81552302>] dump_stack+0x81/0x9e [ 0.183391] [<ffffffff81056ef2>] __schedule_bug+0x92/0xa0 [ 0.183397] [<ffffffff8155323f>] thread_return+0x2a7/0x3c8 [ 0.183404] [<ffffffff81060d88>] __cond_resched+0x38/0x80 [ 0.183410] [<ffffffff815534fd>] _cond_resched+0x4d/0x60 [ 0.183416] [<ffffffff81100dfa>] generic_perform_write+0x15a/0x220 [ 0.183422] [<ffffffff81100f50>] generic_file_buffered_write+0x90/0x160 [ 0.183429] [<ffffffff8110170f>] __generic_file_aio_write_nolock+0x28f/0x4d0 [ 0.183435] [<ffffffff81101aaf>] generic_file_aio_write+0x7f/0x110 [ 0.183442] [<ffffffff8114bb12>] do_sync_write+0x102/0x160 [ 0.183448] [<ffffffff8114be98>] vfs_write+0xd8/0x1c0 [ 0.183453] [<ffffffff8114c82b>] sys_write+0x5b/0xa0 [ 0.183460] [<ffffffff819d508d>] do_copy+0x97/0xd7 [ 0.183466] [<ffffffff819d49c9>] flush_buffer+0x8c/0xc8 [ 0.183472] [<ffffffff81a01140>] gunzip+0x425/0x500 [ 0.183479] [<ffffffff819d4ed1>] unpack_to_rootfs+0x2f6/0x41b [ 0.183484] [<ffffffff819d59e3>] populate_rootfs+0x72/0x13a [ 0.183490] [<ffffffff819d3639>] start_kernel+0x3bf/0x3e6 [ 0.183497] [<ffffffff819d268d>] x86_64_start_reservations+0x134/0x14f [ 0.183503] [<ffffffff819d2803>] x86_64_start_kernel+0x15b/0x17e [ 0.192042] BUG: scheduling while atomic: swapper/0/0x10000002 [ 0.192050] Modules linked in: [ 0.192055] Pid: 0, comm: swapper Not tainted 2.6.31.8-0.0.0.0.239ecb7- desktop #1 [ 0.192058] Call Trace: [ 0.192068] [<ffffffff81011a19>] try_stack_unwind+0x189/0x1b0 [ 0.192075] [<ffffffff8101025d>] dump_trace+0xad/0x3a0 [ 0.192082] [<ffffffff81011524>] show_trace_log_lvl+0x64/0x90 [ 0.192088] [<ffffffff81011573>] show_trace+0x23/0x40 [ 0.192094] [<ffffffff81552302>] dump_stack+0x81/0x9e [ 0.192101] [<ffffffff81056ef2>] __schedule_bug+0x92/0xa0 [ 0.192107] [<ffffffff8155323f>] thread_return+0x2a7/0x3c8 [ 0.192114] [<ffffffff81060d88>] __cond_resched+0x38/0x80 [ 0.192119] [<ffffffff815534fd>] _cond_resched+0x4d/0x60 [ 0.192126] [<ffffffff81100dfa>] generic_perform_write+0x15a/0x220 [ 0.192132] [<ffffffff81100f50>] generic_file_buffered_write+0x90/0x160 [ 0.192139] [<ffffffff8110170f>] __generic_file_aio_write_nolock+0x28f/0x4d0 [ 0.192145] [<ffffffff81101aaf>] generic_file_aio_write+0x7f/0x110 [ 0.192152] [<ffffffff8114bb12>] do_sync_write+0x102/0x160 [ 0.192158] [<ffffffff8114be98>] vfs_write+0xd8/0x1c0 [ 0.192163] [<ffffffff8114c82b>] sys_write+0x5b/0xa0 [ 0.192170] [<ffffffff819d508d>] do_copy+0x97/0xd7 [ 0.192176] [<ffffffff819d49c9>] flush_buffer+0x8c/0xc8 [ 0.192182] [<ffffffff81a01140>] gunzip+0x425/0x500 [ 0.192188] [<ffffffff819d4ed1>] unpack_to_rootfs+0x2f6/0x41b [ 0.192194] [<ffffffff819d59e3>] populate_rootfs+0x72/0x13a [ 0.192200] [<ffffffff819d3639>] start_kernel+0x3bf/0x3e6 [ 0.192206] [<ffffffff819d268d>] x86_64_start_reservations+0x134/0x14f [ 0.192213] [<ffffffff819d2803>] x86_64_start_kernel+0x15b/0x17e [ 0.195117] Freeing initrd memory: 7614k freed [ 0.199573] ACPI: Core revision 20090521 [ 0.217403] BUG: scheduling while atomic: swapper/0/0x10000002 [ 0.217415] Modules linked in: [ 0.217421] Pid: 0, comm: swapper Not tainted 2.6.31.8-0.0.0.0.239ecb7- desktop #1 [ 0.217424] Call Trace: [ 0.217446] [<ffffffff81011a19>] try_stack_unwind+0x189/0x1b0 [ 0.217453] [<ffffffff8101025d>] dump_trace+0xad/0x3a0 [ 0.217460] [<ffffffff81011524>] show_trace_log_lvl+0x64/0x90 [ 0.217466] [<ffffffff81011573>] show_trace+0x23/0x40 [ 0.217474] [<ffffffff81552302>] dump_stack+0x81/0x9e [ 0.217483] [<ffffffff81056ef2>] __schedule_bug+0x92/0xa0 [ 0.217489] [<ffffffff8155323f>] thread_return+0x2a7/0x3c8 [ 0.217497] [<ffffffff81060d88>] __cond_resched+0x38/0x80 [ 0.217503] [<ffffffff815534fd>] _cond_resched+0x4d/0x60 [ 0.217511] [<ffffffff8130544e>] acpi_ps_complete_op+0x2c2/0x2eb [ 0.217519] [<ffffffff81305979>] acpi_ps_parse_loop+0x371/0x3d0 [ 0.217525] [<ffffffff81304666>] acpi_ps_parse_aml+0x119/0x404 [ 0.217532] [<ffffffff81303218>] acpi_ns_one_complete_parse+0x144/0x175 [ 0.217538] [<ffffffff813032a3>] acpi_ns_parse_table+0x5a/0xb3 [ 0.217545] [<ffffffff812fede3>] acpi_ns_load_table+0x87/0x138 [ 0.217551] [<ffffffff813084ee>] acpi_tb_load_namespace+0x80/0x163 [ 0.217558] [<ffffffff813085ee>] acpi_load_tables+0x1d/0x5c [ 0.217566] [<ffffffff81a07186>] acpi_early_init+0x85/0x12e [ 0.217575] [<ffffffff819d363e>] start_kernel+0x3c4/0x3e6 [ 0.217582] [<ffffffff819d268d>] x86_64_start_reservations+0x134/0x14f [ 0.217588] [<ffffffff819d2803>] x86_64_start_kernel+0x15b/0x17e [ 0.225974] BUG: scheduling while atomic: swapper/0/0x10000002 [ 0.225981] Modules linked in: [ 0.225985] Pid: 0, comm: swapper Not tainted 2.6.31.8-0.0.0.0.239ecb7- desktop #1 [ 0.225989] Call Trace: [ 0.225996] [<ffffffff81011a19>] try_stack_unwind+0x189/0x1b0 [ 0.226003] [<ffffffff8101025d>] dump_trace+0xad/0x3a0 [ 0.226009] [<ffffffff81011524>] show_trace_log_lvl+0x64/0x90 [ 0.226015] [<ffffffff81011573>] show_trace+0x23/0x40 [ 0.226021] [<ffffffff81552302>] dump_stack+0x81/0x9e [ 0.226028] [<ffffffff81056ef2>] __schedule_bug+0x92/0xa0 [ 0.226034] [<ffffffff8155323f>] thread_return+0x2a7/0x3c8 [ 0.226041] [<ffffffff81060d88>] __cond_resched+0x38/0x80 [ 0.226046] [<ffffffff815534fd>] _cond_resched+0x4d/0x60 [ 0.226053] [<ffffffff8130544e>] acpi_ps_complete_op+0x2c2/0x2eb [ 0.226059] [<ffffffff81305979>] acpi_ps_parse_loop+0x371/0x3d0 [ 0.226066] [<ffffffff81304666>] acpi_ps_parse_aml+0x119/0x404 [ 0.226072] [<ffffffff81303218>] acpi_ns_one_complete_parse+0x144/0x175 [ 0.226079] [<ffffffff813032e1>] acpi_ns_parse_table+0x98/0xb3 [ 0.226085] [<ffffffff812fede3>] acpi_ns_load_table+0x87/0x138 [ 0.226091] [<ffffffff813084ee>] acpi_tb_load_namespace+0x80/0x163 [ 0.226097] [<ffffffff813085ee>] acpi_load_tables+0x1d/0x5c [ 0.226103] [<ffffffff81a07186>] acpi_early_init+0x85/0x12e [ 0.226109] [<ffffffff819d363e>] start_kernel+0x3c4/0x3e6 [ 0.226115] [<ffffffff819d268d>] x86_64_start_reservations+0x134/0x14f [ 0.226122] [<ffffffff819d2803>] x86_64_start_kernel+0x15b/0x17e [ 0.235078] Setting APIC routing to flat [ 0.235488] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.245991] CPU0: Intel(R) Core(TM)2 Duo CPU L7300 @ 1.40GHz stepping 0a [ 0.246962] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.000999] Initializing CPU#1 [ 0.000999] Calibrating delay using timer specific routine.. 2792.87 BogoMIPS (lpj=1396436) [ 0.000999] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.000999] CPU: L2 cache: 4096K [ 0.000999] CPU 1/0x1 -> Node 0 [ 0.000999] CPU: Physical Processor ID: 0 [ 0.000999] CPU: Processor Core ID: 1 [ 0.000999] mce: CPU supports 6 MCE banks [ 0.000999] CPU1: Thermal monitoring enabled (TM2) [ 0.000999] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 [ 0.319167] CPU1: Intel(R) Core(TM)2 Duo CPU L7300 @ 1.40GHz stepping 0a [ 0.319183] checking TSC synchronization [CPU#0 -> CPU#1]: [ 0.319996] Measured 718921 cycles TSC warp between CPUs, turning off TSC clock. [ 0.319996] Marking TSC unstable due to check_tsc_sync_source failed [ 0.320036] Brought up 2 CPUs [ 0.320036] Total of 2 processors activated (5585.71 BogoMIPS). [ 0.320112] CPU0 attaching sched-domain: [ 0.320117] domain 0: span 0-1 level MC [ 0.320121] groups: 0 1 [ 0.320131] CPU1 attaching sched-domain: [ 0.320134] domain 0: span 0-1 level MC [ 0.320138] groups: 1 0 [ 0.322076] devtmpfs: initialized [ 0.327686] Booting paravirtualized kernel on bare hardware [ 0.328022] regulator: core version 0.5 [ 0.328062] Time: 12:17:28 Date: 12/15/09 [ 0.328155] NET: Registered protocol family 16 [ 0.328371] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.328376] ACPI: bus type pci registered [ 0.328472] PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 63 [ 0.328477] PCI: MCFG area at f0000000 reserved in E820 [ 0.330171] PCI: Using MMCONFIG at f0000000 - f3ffffff [ 0.330175] PCI: Using configuration type 1 for base access [ 0.331519] bio: create slab <bio-0> at 0 [ 0.334999] ACPI: EC: EC description table is found, configuring boot EC [ 0.348097] ACPI: BIOS _OSI(Linux) query honored via DMI [ 0.349029] ACPI: EC: non-query interrupt received, switching to interrupt mode [ 0.370151] ACPI: Interpreter enabled [ 0.370156] ACPI: (supports S0 S3 S4 S5) [ 0.370201] ACPI: Using IOAPIC for interrupt routing [ 0.394794] ACPI: EC: GPE = 0x12, I/O: command/status = 0x66, data = 0x62 [ 0.394799] ACPI: EC: driver started in interrupt mode [ 0.395118] ACPI: Power Resource [PUBS] (on) [ 0.400196] ACPI: ACPI Dock Station Driver: 3 docks/bays found [ 0.400888] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.401045] pci 0000:00:02.0: reg 10 64bit mmio: [0xf8100000-0xf81fffff] [ 0.401056] pci 0000:00:02.0: reg 18 64bit mmio: [0xe0000000-0xefffffff] [ 0.401064] pci 0000:00:02.0: reg 20 io port: [0x1800-0x1807] [ 0.401121] pci 0000:00:02.1: reg 10 64bit mmio: [0xf8200000-0xf82fffff] [ 0.401392] pci 0000:00:19.0: reg 10 32bit mmio: [0xfe000000-0xfe01ffff] [ 0.401409] pci 0000:00:19.0: reg 14 32bit mmio: [0xfe025000-0xfe025fff] [ 0.401429] pci 0000:00:19.0: reg 18 io port: [0x1840-0x185f] [ 0.401568] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ 0.401579] pci 0000:00:19.0: PME# disabled [ 0.401718] pci 0000:00:1a.0: reg 20 io port: [0x1860-0x187f] [ 0.401888] pci 0000:00:1a.1: reg 20 io port: [0x1880-0x189f] [ 0.402060] pci 0000:00:1a.7: reg 10 32bit mmio: [0xfe226c00-0xfe226fff] [ 0.402216] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 0.402227] pci 0000:00:1a.7: PME# disabled [ 0.402366] pci 0000:00:1b.0: reg 10 64bit mmio: [0xfe020000-0xfe023fff] [ 0.402525] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.402536] pci 0000:00:1b.0: PME# disabled [ 0.402764] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.402775] pci 0000:00:1c.0: PME# disabled [ 0.403023] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.403034] pci 0000:00:1c.1: PME# disabled [ 0.403219] pci 0000:00:1d.0: reg 20 io port: [0x18a0-0x18bf] [ 0.403392] pci 0000:00:1d.1: reg 20 io port: [0x18c0-0x18df] [ 0.403586] pci 0000:00:1d.7: reg 10 32bit mmio: [0xfe227000-0xfe2273ff] [ 0.403755] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.403766] pci 0000:00:1d.7: PME# disabled [ 0.404171] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO [ 0.404179] pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH6 GPIO [ 0.404187] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 1600 (mask 007f) [ 0.404195] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 15e0 (mask 000f) [ 0.404203] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 1680 (mask 001f) [ 0.404328] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07] [ 0.404348] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03] [ 0.404367] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07] [ 0.404385] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03] [ 0.404404] pci 0000:00:1f.1: reg 20 io port: [0x18e0-0x18ef] [ 0.404595] pci 0000:00:1f.2: reg 10 io port: [0x1c30-0x1c37] [ 0.404614] pci 0000:00:1f.2: reg 14 io port: [0x1c24-0x1c27] [ 0.404633] pci 0000:00:1f.2: reg 18 io port: [0x1c28-0x1c2f] [ 0.404649] pci 0000:00:1f.2: reg 1c io port: [0x1c20-0x1c23] [ 0.404668] pci 0000:00:1f.2: reg 20 io port: [0x1c00-0x1c1f] [ 0.404688] pci 0000:00:1f.2: reg 24 32bit mmio: [0xfe226000-0xfe2267ff] [ 0.404803] pci 0000:00:1f.2: PME# supported from D3hot [ 0.404814] pci 0000:00:1f.2: PME# disabled [ 0.404902] pci 0000:00:1f.3: reg 10 32bit mmio: [0xfe227400-0xfe2274ff] [ 0.404967] pci 0000:00:1f.3: reg 20 io port: [0x1c40-0x1c5f] [ 0.405211] pci 0000:00:1c.0: bridge io port: [0x2000-0x2fff] [ 0.405219] pci 0000:00:1c.0: bridge 32bit mmio: [0xfc000000-0xfdffffff] [ 0.405239] pci 0000:00:1c.0: bridge 64bit mmio pref: [0xf8000000-0xf80fffff] [ 0.405448] pci 0000:03:00.0: reg 10 32bit mmio: [0xdfcff000-0xdfcfffff] [ 0.405710] pci 0000:03:00.0: PME# supported from D0 D3hot [ 0.405724] pci 0000:03:00.0: PME# disabled [ 0.405861] pci 0000:00:1c.1: bridge io port: [0x3000-0x3fff] [ 0.405868] pci 0000:00:1c.1: bridge 32bit mmio: [0xdc100000-0xdfcfffff] [ 0.405887] pci 0000:00:1c.1: bridge 64bit mmio pref: [0xdfe00000-0xdfefffff] [ 0.406004] pci 0000:05:00.0: reg 10 32bit mmio: [0xf8300000-0xf8300fff] [ 0.406065] pci 0000:05:00.0: supports D1 D2 [ 0.406068] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.406080] pci 0000:05:00.0: PME# disabled [ 0.406188] pci 0000:05:00.1: reg 10 32bit mmio: [0xf8301000-0xf83017ff] [ 0.406337] pci 0000:05:00.1: supports D1 D2 [ 0.406340] pci 0000:05:00.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.406352] pci 0000:05:00.1: PME# disabled [ 0.406458] pci 0000:05:00.2: reg 10 32bit mmio: [0xf8301800-0xf83018ff] [ 0.406614] pci 0000:05:00.2: supports D1 D2 [ 0.406618] pci 0000:05:00.2: PME# supported from D0 D1 D2 D3hot D3cold [ 0.406629] pci 0000:05:00.2: PME# disabled [ 0.406811] pci 0000:00:1e.0: transparent bridge [ 0.406822] pci 0000:00:1e.0: bridge io port: [0x4000-0x7fff] [ 0.406833] pci 0000:00:1e.0: bridge 32bit mmio: [0xf8300000-0xfbffffff] [ 0.406852] pci 0000:00:1e.0: bridge 64bit mmio pref: [0xf4000000-0xf7ffffff] [ 0.406961] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.407271] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP0._PRT] [ 0.407401] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT] [ 0.407550] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] [ 0.417694] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11) [ 0.418062] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11) [ 0.418423] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11) [ 0.418782] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11) [ 0.419148] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11) [ 0.419506] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11) [ 0.419863] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11) [ 0.420227] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11) [ 0.420610] SCSI subsystem initialized [ 0.420647] libata version 3.00 loaded. [ 0.421042] usbcore: registered new interface driver usbfs [ 0.421067] usbcore: registered new interface driver hub [ 0.421109] usbcore: registered new device driver usb [ 0.421212] PCI: Using ACPI for IRQ routing [ 0.423052] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.423061] hpet0: 3 comparators, 64-bit 14.318180 MHz counter [ 0.427029] Switched to high resolution mode on CPU 0 [ 0.427233] Switched to high resolution mode on CPU 1 [ 0.428139] AppArmor: AppArmor Filesystem Enabled [ 0.430278] pnp: PnP ACPI init [ 0.430295] ACPI: bus type pnp registered [ 0.438814] pnp: PnP ACPI: found 12 devices [ 0.438819] ACPI: ACPI bus type pnp unregistered [ 0.438835] system 00:00: iomem range 0x0-0x9ffff could not be reserved [ 0.438840] system 00:00: iomem range 0xc0000-0xc3fff has been reserved [ 0.438845] system 00:00: iomem range 0xc4000-0xc7fff has been reserved [ 0.438849] system 00:00: iomem range 0xc8000-0xcbfff has been reserved [ 0.438854] system 00:00: iomem range 0xcc000-0xcffff has been reserved [ 0.438858] system 00:00: iomem range 0xd0000-0xd3fff could not be reserved [ 0.438863] system 00:00: iomem range 0xe0000-0xe3fff could not be reserved [ 0.438868] system 00:00: iomem range 0xe4000-0xe7fff could not be reserved [ 0.438873] system 00:00: iomem range 0xe8000-0xebfff could not be reserved [ 0.438877] system 00:00: iomem range 0xec000-0xeffff could not be reserved [ 0.438882] system 00:00: iomem range 0xf0000-0xfffff could not be reserved [ 0.438887] system 00:00: iomem range 0x100000-0x7dffffff could not be reserved [ 0.438892] system 00:00: iomem range 0xfec00000-0xfed3ffff could not be reserved [ 0.438897] system 00:00: iomem range 0xfed4c000-0xffffffff could not be reserved [ 0.438909] system 00:02: ioport range 0x164e-0x164f has been reserved [ 0.438914] system 00:02: ioport range 0x1000-0x107f has been reserved [ 0.438918] system 00:02: ioport range 0x1180-0x11bf has been reserved [ 0.438923] system 00:02: ioport range 0x800-0x80f has been reserved [ 0.438927] system 00:02: ioport range 0x15e0-0x15ef has been reserved [ 0.438932] system 00:02: ioport range 0x1600-0x165f could not be reserved [ 0.438937] system 00:02: iomem range 0xf0000000-0xf3ffffff has been reserved [ 0.438942] system 00:02: iomem range 0xfed1c000-0xfed1ffff has been reserved [ 0.438947] system 00:02: iomem range 0xfed14000-0xfed17fff has been reserved [ 0.438951] system 00:02: iomem range 0xfed18000-0xfed18fff has been reserved [ 0.438956] system 00:02: iomem range 0xfed19000-0xfed19fff has been reserved [ 0.438961] system 00:02: iomem range 0xfed45000-0xfed4bfff has been reserved [ 0.444081] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02 [ 0.444089] pci 0000:00:1c.0: IO window: 0x2000-0x2fff [ 0.444105] pci 0000:00:1c.0: MEM window: 0xfc000000-0xfdffffff [ 0.444116] pci 0000:00:1c.0: PREFETCH window: 0x000000f8000000-0x000000f80fffff [ 0.444136] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03 [ 0.444143] pci 0000:00:1c.1: IO window: 0x3000-0x3fff [ 0.444158] pci 0000:00:1c.1: MEM window: 0xdc100000-0xdfcfffff [ 0.444169] pci 0000:00:1c.1: PREFETCH window: 0x000000dfe00000-0x000000dfefffff [ 0.444194] pci 0000:05:00.0: CardBus bridge, secondary bus 0000:06 [ 0.444198] pci 0000:05:00.0: IO window: 0x004000-0x0040ff [ 0.444209] pci 0000:05:00.0: IO window: 0x004400-0x0044ff [ 0.444220] pci 0000:05:00.0: PREFETCH window: 0xf4000000-0xf7ffffff [ 0.444231] pci 0000:05:00.0: MEM window: 0x80000000-0x83ffffff [ 0.444243] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:05 [ 0.444250] pci 0000:00:1e.0: IO window: 0x4000-0x7fff [ 0.444261] pci 0000:00:1e.0: MEM window: 0xf8300000-0xfbffffff [ 0.444272] pci 0000:00:1e.0: PREFETCH window: 0x000000f4000000-0x000000f7ffffff [ 0.444308] alloc irq_desc for 20 on node 0 [ 0.444312] alloc kstat_irqs on node 0 [ 0.444319] pci 0000:00:1c.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 0.444331] pci 0000:00:1c.0: setting latency timer to 64 [ 0.444352] alloc irq_desc for 21 on node 0 [ 0.444355] alloc kstat_irqs on node 0 [ 0.444361] pci 0000:00:1c.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 0.444371] pci 0000:00:1c.1: setting latency timer to 64 [ 0.444384] pci 0000:00:1e.0: enabling device (0005 -> 0007) [ 0.444399] pci 0000:00:1e.0: setting latency timer to 64 [ 0.444420] alloc irq_desc for 16 on node 0 [ 0.444423] alloc kstat_irqs on node 0 [ 0.444429] pci 0000:05:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.444442] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.444446] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] [ 0.444451] pci_bus 0000:02: resource 0 io: [0x2000-0x2fff] [ 0.444454] pci_bus 0000:02: resource 1 mem: [0xfc000000-0xfdffffff] [ 0.444458] pci_bus 0000:02: resource 2 pref mem [0xf8000000-0xf80fffff] [ 0.444462] pci_bus 0000:03: resource 0 io: [0x3000-0x3fff] [ 0.444466] pci_bus 0000:03: resource 1 mem: [0xdc100000-0xdfcfffff] [ 0.444469] pci_bus 0000:03: resource 2 pref mem [0xdfe00000-0xdfefffff] [ 0.444473] pci_bus 0000:05: resource 0 io: [0x4000-0x7fff] [ 0.444477] pci_bus 0000:05: resource 1 mem: [0xf8300000-0xfbffffff] [ 0.444481] pci_bus 0000:05: resource 2 pref mem [0xf4000000-0xf7ffffff] [ 0.444484] pci_bus 0000:05: resource 3 io: [0x00-0xffff] [ 0.444488] pci_bus 0000:05: resource 4 mem: [0x000000-0xffffffffffffffff] [ 0.444492] pci_bus 0000:06: resource 0 io: [0x4000-0x40ff] [ 0.444495] pci_bus 0000:06: resource 1 io: [0x4400-0x44ff] [ 0.444499] pci_bus 0000:06: resource 2 pref mem [0xf4000000-0xf7ffffff] [ 0.444503] pci_bus 0000:06: resource 3 mem: [0x80000000-0x83ffffff] [ 0.444625] NET: Registered protocol family 2 [ 0.444866] IP route cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.446176] TCP established hash table entries: 262144 (order: 10, 4194304 bytes) [ 0.448234] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.448835] TCP: Hash tables configured (established 262144 bind 65536) [ 0.448839] TCP reno registered [ 0.449093] NET: Registered protocol family 1 [ 0.449281] Simple Boot Flag at 0x35 set to 0x1 [ 0.449788] Scanning for low memory corruption every 60 seconds [ 0.450077] audit: initializing netlink socket (disabled) [ 0.450094] type=2000 audit(1260879447.450:1): initialized [ 0.455560] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.455815] VFS: Disk quotas dquot_6.5.2 [ 0.455877] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.456165] msgmni has been set to 982 [ 0.456323] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.456328] io scheduler noop registered [ 0.456331] io scheduler anticipatory registered [ 0.456334] io scheduler deadline registered [ 0.456370] io scheduler cfq registered (default) [ 0.456482] pci 0000:00:02.0: Boot video device [ 0.457037] alloc irq_desc for 24 on node 0 [ 0.457041] alloc kstat_irqs on node 0 [ 0.457067] pcieport-driver 0000:00:1c.0: irq 24 for MSI/MSI-X [ 0.457095] pcieport-driver 0000:00:1c.0: setting latency timer to 64 [ 0.457525] alloc irq_desc for 25 on node 0 [ 0.457529] alloc kstat_irqs on node 0 [ 0.457550] pcieport-driver 0000:00:1c.1: irq 25 for MSI/MSI-X [ 0.457577] pcieport-driver 0000:00:1c.1: setting latency timer to 64 [ 0.457831] pci-stub: invalid id string "" [ 0.457988] vesafb: framebuffer at 0xe0000000, mapped to 0xffffc90004980000, using 3072k, total 7616k [ 0.457993] vesafb: mode is 1024x768x16, linelength=2048, pages=3 [ 0.457996] vesafb: scrolling: redraw [ 0.458000] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 [ 0.458242] bootsplash 3.1.6-2004/03/31: looking for picture... [ 0.472720] bootsplash: silentjpeg size 100573 bytes [ 0.492161] bootsplash: ...found (1024x768, 27393 bytes, v3). [ 0.543908] Console: switching to colour frame buffer device 124x44 [ 0.595198] fb0: VESA VGA frame buffer device [ 0.597624] Non-volatile memory driver v1.3 [ 0.597629] Linux agpgart interface v0.103 [ 0.597637] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled [ 0.597787] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.598522] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.598791] ahci 0000:00:1f.2: version 3.0 [ 0.598820] ahci 0000:00:1f.2: PCI INT B -> GSI 16 (level, low) -> IRQ 16 [ 0.598895] alloc irq_desc for 26 on node 0 [ 0.598898] alloc kstat_irqs on node 0 [ 0.598924] ahci 0000:00:1f.2: irq 26 for MSI/MSI-X [ 0.599043] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 1.5 Gbps 0x5 impl SATA mode [ 0.599049] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part [ 0.599061] ahci 0000:00:1f.2: setting latency timer to 64 [ 0.599319] scsi0 : ahci [ 0.599486] scsi1 : ahci [ 0.599584] scsi2 : ahci [ 0.599707] ata1: SATA max UDMA/133 abar m2048@0xfe226000 port 0xfe226100 irq 26 [ 0.599711] ata2: DUMMY [ 0.599717] ata3: SATA max UDMA/133 abar m2048@0xfe226000 port 0xfe226200 irq 26 [ 0.599862] ata_piix 0000:00:1f.1: version 2.13 [ 0.599883] ata_piix 0000:00:1f.1: PCI INT C -> GSI 16 (level, low) -> IRQ 16 [ 0.599945] ata_piix 0000:00:1f.1: setting latency timer to 64 [ 0.600080] scsi3 : ata_piix [ 0.600170] scsi4 : ata_piix [ 0.601194] ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x18e0 irq 14 [ 0.601199] ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x18e8 irq 15 [ 0.601303] Fixed MDIO Bus: probed [ 0.601313] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.601632] ata5: port disabled. ignoring. [ 0.602231] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0 [ 0.602248] alloc irq_desc for 22 on node 0 [ 0.602251] alloc kstat_irqs on node 0 [ 0.602259] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22 [ 0.602279] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 0.602286] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 0.602328] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 0.606278] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported [ 0.606301] ehci_hcd 0000:00:1a.7: irq 22, io mem 0xfe226c00 [ 0.616028] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 0.616066] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.616070] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.616073] usb usb1: Product: EHCI Host Controller [ 0.616077] usb usb1: Manufacturer: Linux 2.6.31.8-0.0.0.0.239ecb7-desktop ehci_hcd [ 0.616080] usb usb1: SerialNumber: 0000:00:1a.7 [ 0.616183] usb usb1: configuration #1 chosen from 1 choice [ 0.616228] hub 1-0:1.0: USB hub found [ 0.616239] hub 1-0:1.0: 4 ports detected [ 0.617628] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0 [ 0.617642] alloc irq_desc for 19 on node 0 [ 0.617645] alloc kstat_irqs on node 0 [ 0.617651] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 0.617670] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 0.617677] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 0.617690] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 0.621632] ehci_hcd 0000:00:1d.7: debug port 1 [ 0.621647] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 0.621669] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xfe227000 [ 0.632027] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 0.632057] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.632061] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.632065] usb usb2: Product: EHCI Host Controller [ 0.632068] usb usb2: Manufacturer: Linux 2.6.31.8-0.0.0.0.239ecb7-desktop ehci_hcd [ 0.632071] usb usb2: SerialNumber: 0000:00:1d.7 [ 0.632168] usb usb2: configuration #1 chosen from 1 choice [ 0.632209] hub 2-0:1.0: USB hub found [ 0.632220] hub 2-0:1.0: 4 ports detected [ 0.632321] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.632345] uhci_hcd: USB Universal Host Controller Interface driver [ 0.633036] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 0.633049] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 0.633056] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 0.633069] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 0.633126] uhci_hcd 0000:00:1a.0: irq 20, io base 0x00001860 [ 0.633183] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.633187] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.633191] usb usb3: Product: UHCI Host Controller [ 0.633194] usb usb3: Manufacturer: Linux 2.6.31.8-0.0.0.0.239ecb7-desktop uhci_hcd [ 0.633197] usb usb3: SerialNumber: 0000:00:1a.0 [ 0.633286] usb usb3: configuration #1 chosen from 1 choice [ 0.633328] hub 3-0:1.0: USB hub found [ 0.633338] hub 3-0:1.0: 2 ports detected [ 0.634447] uhci_hcd 0000:00:1a.1: power state changed by ACPI to D0 [ 0.634458] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 0.634471] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 0.634478] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 0.634491] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 0.634549] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001880 [ 0.634609] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.634613] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.634616] usb usb4: Product: UHCI Host Controller [ 0.634619] usb usb4: Manufacturer: Linux 2.6.31.8-0.0.0.0.239ecb7-desktop uhci_hcd [ 0.634623] usb usb4: SerialNumber: 0000:00:1a.1 [ 0.634714] usb usb4: configuration #1 chosen from 1 choice [ 0.634755] hub 4-0:1.0: USB hub found [ 0.634765] hub 4-0:1.0: 2 ports detected [ 0.635653] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [ 0.635663] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.635676] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 0.635683] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 0.635701] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5 [ 0.635757] uhci_hcd 0000:00:1d.0: irq 16, io base 0x000018a0 [ 0.635816] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.635820] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.635824] usb usb5: Product: UHCI Host Controller [ 0.635827] usb usb5: Manufacturer: Linux 2.6.31.8-0.0.0.0.239ecb7-desktop uhci_hcd [ 0.635830] usb usb5: SerialNumber: 0000:00:1d.0 [ 0.635920] usb usb5: configuration #1 chosen from 1 choice [ 0.635965] hub 5-0:1.0: USB hub found [ 0.635978] hub 5-0:1.0: 2 ports detected [ 0.636120] alloc irq_desc for 17 on node 0 [ 0.636123] alloc kstat_irqs on node 0 [ 0.636130] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 0.636143] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 0.636150] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 0.636162] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6 [ 0.636217] uhci_hcd 0000:00:1d.1: irq 17, io base 0x000018c0 [ 0.636276] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.636281] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.636284] usb usb6: Product: UHCI Host Controller [ 0.636287] usb usb6: Manufacturer: Linux 2.6.31.8-0.0.0.0.239ecb7-desktop uhci_hcd [ 0.636290] usb usb6: SerialNumber: 0000:00:1d.1 [ 0.636380] usb usb6: configuration #1 chosen from 1 choice [ 0.636420] hub 6-0:1.0: USB hub found [ 0.636431] hub 6-0:1.0: 2 ports detected [ 0.636519] Initializing USB Mass Storage driver... [ 0.636570] usbcore: registered new interface driver usb-storage [ 0.636574] USB Mass Storage support registered. [ 0.636622] usbcore: registered new interface driver libusual [ 0.636643] usbcore: registered new interface driver ums-alauda [ 0.636669] usbcore: registered new interface driver ums-cypress [ 0.636689] usbcore: registered new interface driver ums-datafab [ 0.636710] usbcore: registered new interface driver ums-freecom [ 0.636729] usbcore: registered new interface driver ums-isd200 [ 0.636747] usbcore: registered new interface driver ums-jumpshot [ 0.636765] usbcore: registered new interface driver ums-karma [ 0.636783] usbcore: registered new interface driver ums-onetouch [ 0.636802] usbcore: registered new interface driver ums-sddr09 [ 0.636820] usbcore: registered new interface driver ums-sddr55 [ 0.636841] usbcore: registered new interface driver ums-usbat [ 0.636907] PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 [ 0.648738] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.648747] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.648839] mice: PS/2 mouse device common for all mice [ 0.648979] rtc_cmos 00:07: RTC can wake from S4 [ 0.649061] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0 [ 0.649107] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 0.649124] cpuidle: using governor ladder [ 0.649127] cpuidle: using governor menu [ 0.649536] usbcore: registered new interface driver hiddev [ 0.649557] usbcore: registered new interface driver usbhid [ 0.649563] usbhid: v2.6:USB HID core driver [ 0.654327] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 0.801139] TCP cubic registered [ 0.801250] NET: Registered protocol family 10 [ 0.801952] lo: Disabled Privacy Extensions [ 0.802490] lib80211: common routines for IEEE802.11 drivers [ 0.802494] lib80211_crypt: registered algorithm 'NULL' [ 0.802627] PM: Checking image partition /dev/disk/by-id/ata- ST9120822AS_5LZ2112B-part5 [ 0.904473] ata3: SATA link down (SStatus 0 SControl 300) [ 0.904507] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 0.905804] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded [ 0.905809] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out [ 0.905906] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded [ 0.905910] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out [ 0.906819] ata1.00: ATA-7: ST9120822AS, 3.CLF, max UDMA/100 [ 0.906823] ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 0.908251] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded [ 0.908256] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out [ 0.908348] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded [ 0.908353] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out [ 0.909279] ata1.00: configured for UDMA/100 [ 0.922077] ata1.00: configured for UDMA/100 [ 0.922081] ata1: EH complete [ 0.922236] scsi 0:0:0:0: Direct-Access ATA ST9120822AS 3.CL PQ: 0 ANSI: 5 [ 0.922497] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB) [ 0.922571] sd 0:0:0:0: [sda] Write Protect is off [ 0.922575] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 0.922614] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 0.922816] sda: sda1 sda2 sda3 < sda5 sda6 sda7 sda8 > [ 0.981151] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.106039] usb 1-4: new high speed USB device using ehci_hcd and address 3 [ 1.208644] IBM TrackPoint firmware: 0x0e, buttons: 3/3 [ 1.220369] usb 1-4: New USB device found, idVendor=17ef, idProduct=1000 [ 1.220374] usb 1-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.220458] usb 1-4: configuration #1 chosen from 1 choice [ 1.220657] hub 1-4:1.0: USB hub found [ 1.220741] hub 1-4:1.0: 4 ports detected [ 1.226448] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/input/input1 [ 1.230202] PM: Resume from disk failed. [ 1.230224] registered taskstats version 1 [ 1.230398] Magic number: 5:156:279 [ 1.230419] tty tty16: hash matches [ 1.230512] rtc_cmos 00:07: setting system clock to 2009-12-15 12:17:29 UTC (1260879449) [ 1.230677] Freeing unused kernel memory: 980k freed [ 1.231080] Write protecting the kernel read-only data: 8856k [ 1.278908] thermal LNXTHERM:01: registered as thermal_zone0 [ 1.278923] ACPI: Thermal Zone [THM0] (43 C) [ 1.281174] thermal LNXTHERM:02: registered as thermal_zone1 [ 1.281190] ACPI: Thermal Zone [THM1] (42 C) [ 1.303464] Uniform Multi-Platform E-IDE driver [ 1.315915] ACPI: SSDT 000000007d6e1b32 00282 (v01 PmRef Cpu0Ist 00000100 INTL 20050513) [ 1.317313] ACPI: SSDT 000000007d6e1e39 0085E (v01 PmRef Cpu0Cst 00000100 INTL 20050513) [ 1.322948] Monitor-Mwait will be used to enter C-1 state [ 1.323279] Monitor-Mwait will be used to enter C-2 state [ 1.323324] Monitor-Mwait will be used to enter C-3 state [ 1.323421] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [ 1.323474] processor LNXCPU:00: registered as cooling_device0 [ 1.323480] ACPI: Processor [CPU0] (supports 8 throttling states) [ 1.324092] ACPI: SSDT 000000007d6e1a6a 000C8 (v01 PmRef Cpu1Ist 00000100 INTL 20050513) [ 1.325118] ACPI: SSDT 000000007d6e1db4 00085 (v01 PmRef Cpu1Cst 00000100 INTL 20050513) [ 1.328188] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) [ 1.328231] processor LNXCPU:01: registered as cooling_device1 [ 1.328236] ACPI: Processor [CPU1] (supports 8 throttling states) [ 1.363979] udev: starting version 146 [ 1.427293] usb 3-2: new full speed USB device using uhci_hcd and address 2 [ 1.589221] usb 3-2: New USB device found, idVendor=0483, idProduct=2016 [ 1.589227] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.589232] usb 3-2: Product: Biometric Coprocessor [ 1.589235] usb 3-2: Manufacturer: STMicroelectronics [ 1.589368] usb 3-2: configuration #1 chosen from 1 choice [ 2.000330] Clocksource tsc unstable (delta = -425007706 ns) [ 2.121083] PM: Marking nosave pages: 0000000000001000 - 0000000000006000 [ 2.121089] PM: Marking nosave pages: 000000000009d000 - 0000000000100000 [ 2.121096] PM: Basic memory bitmaps created [ 2.161690] PM: Basic memory bitmaps freed [ 2.222928] PM: Starting manual resume from disk [ 2.222933] PM: Resume from partition 8:5 [ 2.222935] PM: Checking hibernation image. [ 2.223219] PM: Resume from disk failed. [ 2.331829] EXT4-fs (sda7): barriers enabled [ 2.342639] kjournald2 starting: pid 245, dev sda7:8, commit interval 5 seconds [ 2.343315] EXT4-fs (sda7): internal journal on sda7:8 [ 2.343323] EXT4-fs (sda7): delayed allocation enabled [ 2.343328] EXT4-fs: file extents enabled [ 2.343415] EXT4-fs: mballoc enabled [ 2.343438] EXT4-fs (sda7): mounted filesystem with ordered data mode [ 5.624290] udev: starting version 146 -- Andreas Jaeger, Program Manager openSUSE, aj(a){novell.com,opensuse.org} Twitter: jaegerandi | Identica: jaegerandi SUSE LINUX Products GmbH, GF: Markus Rex, HRB 16746 (AG Nürnberg) Maxfeldstr. 5, 90409 Nürnberg, Germany GPG fingerprint = 93A3 365E CE47 B889 DF7F FED1 389A 563C C272 A126

4 15

[opensuse-kernel] Clarification of bzImage vs gzip vmlinuz-* for -default/-xen kernels?
by mail ignored 12 Jan '10

12 Jan '10

I'm troubleshooting a Xen boot, using recent PVGRUB, of an opensuse DomU. @ console I see an error: ... ERROR Invalid kernel: xc_dom_probe_bzimage_kernel: kernel is not a bzImage xc_dom_bzimageloader.c:350: panic: xc_dom_probe_bzimage_kernel: kernel is not a bzImage ... I note, file `ls /boot/vmlinuz-2*` /boot/vmlinuz-2.6.31.8-0.1-default: Linux/x86 Kernel, Setup Version 0x20a, bzImage, Version 2.6.31.8, RO-rootFS, root_dev 0x301, swap_dev 0x3, Normal VGA /boot/vmlinuz-2.6.31.8-0.1-xen: gzip compressed data, from Unix, last modified: Thu Dec 17 18:32:20 2009, max compression /boot/vmlinuz-2.6.31.9-0.0.0.3.3490791-default: Linux/x86 Kernel, Setup Version 0x20a, bzImage, Version 2.6.31.9, RO-rootFS, root_dev 0x809, swap_dev 0x3, Normal VGA /boot/vmlinuz-2.6.31.9-0.0.0.3.3490791-xen: gzip compressed data, from Unix, last modified: Tue Dec 29 08:20:57 2009, max compression Is there a reason that the -default kernels are built as "bzImages", and the -xen kernels as "gzip compressed data"? PVGRUB's apparently had some recent patches/issues re: bzImage, gzip, lzma compression etc; following those up of course. This difference seems possibly relevant to the error above. Any clarification is appreciated. -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-kernel+help(a)opensuse.org

4 7

[opensuse-kernel] kotd ERROR-REPORTING: 11.2 kernel not building,repo not enabled
by mail ignored 01 Jan '10

01 Jan '10

per http://ftp.suse.com/pub/projects/kernel/kotd/ERROR-REPORTING, please note that http://ftp.suse.com/pub/projects/kernel/kotd/openSUSE-11.2/x86_64/ has not built for 10 days, since 12/19/09. can that get fixed? also, re: https://bugzilla.novell.com/show_bug.cgi?id=561958, can the obs repo corresponding to the ftp dir be turned on? Thanks. -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-kernel+help(a)opensuse.org

2 4

[opensuse-kernel] add 11.2 to Kernel:/HEAD
by Marcus Meissner 27 Dec '09

27 Dec '09

Hi, can you please add openSUSE 11.2 as distro for Kernel:HEAD building? Ciao, Marcus -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-kernel+help(a)opensuse.org

2 1

[opensuse-kernel] update/11.2-test Kernel 2.6.31.8-0.1-desktop - 2nd disk & USB Mass storage swapped drive letters
by Rob OpenSuSE 19 Dec '09

19 Dec '09

Tried out the kernel update from 11.2-test, seems alright so far but thought better give heads up on drive name change. Trying to break things, I had /boot read-only, and remounted after checking the error popup. Did have some issues with the preload kernel module package, perhaps because I had a kernel-vanilla installed as well as desktop, which I upgraded first rather than running whole patch. Anyway, on first boot up after loading the preload package, when hitting ESC I noticed some unexpected error messages re object files not being found very early on, before udev is started. The next boot was clean. When I looked, a USB mass storage device has become sdb, and the 2nd hard disk is sdc. Because I mount using Labels it's not a problem for me, but thought I better report this in case, it's not due to my system glitch, but more general affecting ppl using device names statically. Rob -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-kernel+help(a)opensuse.org

2 3

[opensuse-kernel] Hardware enablement in kernel updates
by Jeff Mahoney 16 Dec '09

16 Dec '09

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi all - Some of you have seen my posts on this list before, but it may not be clear what my involvement is with kernel development. I lead one of the kernel teams in SUSE Labs. I maintain the master branch of the SUSE kernel trees (both SLE and openSUSE) and have been the release manager for the kernel for the past few openSUSE releases (as well as a few enterprise releases). Historically, some decisions have been made that affect the openSUSE kernel collaboratively, but not entirely transparently, and I'd like to change that. One of our policies regarding kernel updates is that we'll fix bugs pertaining to usability until the next release. Otherwise, it's security, data loss/corruption, and system crash fixes until EOL. While it could be argued that hardware enablement falls under usability, we haven't treated it that way in the past. I'd like to revisit that. I was asked today about the possibility of adding a driver to the 11.2 kernel, and I started thinking about it. Strictly speaking, it's against our inclusion policy. However, the new longer release cycle means that users with new hardware may be forced to run a Factory kernel on 11.2, switch to a different distribution, or wait around until the next release. While I don't personally have a problem with option #1, I'm a kernel hacker and kernel bugs don't scare me. Not everyone wants to be a beta tester. Option #2 isn't in the long-term interests of the openSUSE community. Option #3 is painful because it means that you have this shiny new hardware for which you've paid your hard-earned money and can't use to its fullest potential. The particular driver I was asked about is completely standalone. I don't have a problem including it since it won't affect anything else. The issue was that I don't want to encourage the expectation that this would be a normal occurrence - unless we want to change the policy surrounding updates. I should be clear on what I have in mind and what the limitations are. I do not intend to open the door for every crap driver that's floating around out there. There are reasons that the drivers aren't in the mainline kernel and I have no interest in duplicating that debate on this list. Drivers up for post-release inclusion _must_ be already in the mainline kernel. The other limitation is that the changes be completely standalone or isolated such that it's apparent that the introduction of the change doesn't affect the stability of users who are using those drivers already. That part can get sticky since adding a PCI ID is easy, but adding handling that is needed to enable that PCI ID while potentially affecting other devices in a clean way is not. So with that, I'd like to open it up for discussion. I've cross-posted between opensuse-factory and opensuse-kernel since it's a policy that affects everyone, not just those interested in the kernel itself. - -Jeff - -- Jeff Mahoney SUSE Labs -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.12 (GNU/Linux) Comment: Using GnuPG with SUSE - http://enigmail.mozdev.org/ iEYEARECAAYFAksm4ecACgkQLPWxlyuTD7LD7QCeK9lDtJo6h/LcRnfng93+i0Pc Hv0An2Wnb1N41xxLSQjB830w1SwGdiUQ =Fwo1 -----END PGP SIGNATURE----- -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-kernel+help(a)opensuse.org

8 14