September 2019 - openSUSE Kernel - openSUSE Mailing Lists

[opensuse-kernel] kernel-default-base-2.6.29-5.2.x86_64 rpm errors
by Dave Plater 18 Jul '24

18 Jul '24

Hi, I'm busy updating to the latest factory kernel and have received the following errors from kernel-default-base installation (I did insert a blank dvd during the installation of the rpm by zypper):- WARNING: /lib/modules/2.6.29-rc8-5-default/kernel/drivers/scsi/sd_mod.ko needs unknown symbol crc_t10dif WARNING: /lib/modules/2.6.29-rc8-5-default/kernel/drivers/scsi/sr_mod.ko needs unknown symbol register_cdrom WARNING: /lib/modules/2.6.29-rc8-5-default/kernel/drivers/scsi/sr_mod.ko needs unknown symbol cdrom_ioctl WARNING: /lib/modules/2.6.29-rc8-5-default/kernel/drivers/scsi/sr_mod.ko needs unknown symbol cdrom_media_changed WARNING: /lib/modules/2.6.29-rc8-5-default/kernel/drivers/scsi/sr_mod.ko needs unknown symbol cdrom_get_media_event WARNING: /lib/modules/2.6.29-rc8-5-default/kernel/drivers/scsi/sr_mod.ko needs unknown symbol cdrom_release WARNING: /lib/modules/2.6.29-rc8-5-default/kernel/drivers/scsi/sr_mod.ko needs unknown symbol cdrom_open WARNING: /lib/modules/2.6.29-rc8-5-default/kernel/drivers/scsi/sr_mod.ko needs unknown symbol unregister_cdrom WARNING: /lib/modules/2.6.29-rc8-5-default/kernel/drivers/scsi/sr_mod.ko needs unknown symbol cdrom_number_of_slots And then these errors which I think IIRC happened before when the kernel was first split into three:- Kernel image: /boot/vmlinuz-2.6.29-rc8-5-default Initrd image: /boot/initrd-2.6.29-rc8-5-default Root device: /dev/disk/by-id/ata-WDC_WD800JB-00JJC0_WD-WMAM9RA78067-part3 (/dev/sda3) (mounted on / as xfs) Resume device: /dev/disk/by-id/ata-WDC_WD800JB-00JJC0_WD-WMAM9RA78067-part2 (/dev/sda2) FATAL: Module processor not found. WARNING: no dependencies for kernel module 'processor' found. FATAL: Module thermal not found. WARNING: no dependencies for kernel module 'thermal' found. FATAL: Module ata_generic not found. WARNING: no dependencies for kernel module 'ata_generic' found. FATAL: Module piix not found. WARNING: no dependencies for kernel module 'piix' found. FATAL: Module ide_pci_generic not found. WARNING: no dependencies for kernel module 'ide_pci_generic' found. FATAL: Module fan not found. WARNING: no dependencies for kernel module 'fan' found. FATAL: Module xfs not found. WARNING: no dependencies for kernel module 'xfs' found. FATAL: Module usbhid not found. WARNING: no dependencies for kernel module 'usbhid' found. Kernel Modules: scsi_mod libata ata_piix edd ahci sd_mod usbcore ohci-hcd ehci-hcd uhci-hcd WARNING: /dev/shm/mkinitramfs.0drQsZ/mnt/lib/modules/2.6.29-rc8-5-default/kernel/drivers/scsi/sd_mod.ko needs unknown symbol crc_t10dif Features: block usb resume.userspace resume.kernel Bootsplash: openSUSE (1280x1024) 22669 blocks Should I open a bug report about the errors which are possibly from inserting a dvd while the kernel rpm was installing? Regards Dave P -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-kernel+help(a)opensuse.org

2 2

[opensuse-kernel] [PATCH] rpm/config.sh: Enable building DTBs
by Guillaume Gardet 02 Oct '19

02 Oct '19

Signed-off-by: Guillaume Gardet <guillaume.gardet(a)arm.com> --- This patch is for 15.2 branch. rpm/config.sh | 2 ++ 1 file changed, 2 insertions(+) diff --git a/rpm/config.sh b/rpm/config.sh index 904bea6cf36..76cbef8def5 100644 --- a/rpm/config.sh +++ b/rpm/config.sh @@ -4,6 +4,8 @@ SRCVERSION=5.3-rc8 VARIANT= # enable kernel module compression COMPRESS_MODULES="xz" +# Compile binary devicetrees +BUILD_DTBS="Yes" # Use new style livepatch package names LIVEPATCH=livepatch # buildservice projects to build the kernel against -- 2.23.0 -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-kernel+owner(a)opensuse.org

5 18

[opensuse-kernel] [PATCH] kernel-binary: Strip number of build machine CPUs
by Bernhard M. Wiedemann 13 Sep '19

13 Sep '19

Strip number of build machine CPUs to make package build reproducible. Without this patch, /usr/src/linux-@VERSION@-@RELEASE_SHORT@-obj/x86_64/vanilla/.kernel-binary.spec.buildenv contained rpm %_smp_mflags in a line like export MAKE_ARGS=" --output-sync -j4" --- if the file is not actually needed, we could also do a find -delete --- rpm/kernel-binary.spec.in | 2 ++ 1 file changed, 2 insertions(+) diff --git a/rpm/kernel-binary.spec.in b/rpm/kernel-binary.spec.in index 4d941c2eef..1a6b22e3b0 100644 --- a/rpm/kernel-binary.spec.in +++ b/rpm/kernel-binary.spec.in @@ -811,6 +811,8 @@ if [ %CONFIG_MODULES = y ]; then fi rm -rf %{buildroot}/lib/firmware +# strip number of build machine CPUs to make build reproducible +find %{buildroot}/usr/src/linux-*-obj/ -name .kernel-binary.spec.buildenv | xargs sed -i 's/ -j[1-9][0-9]*"$/"/' add_dirs_to_filelist() { sed -rn ' -- 2.16.4 -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-kernel+owner(a)opensuse.org

2 2

[opensuse-kernel] [PATCH] rpm/constraints.in: lower disk space required for ARM
by Guillaume Gardet 11 Sep '19

11 Sep '19

With a requirement of 35GB, only 2 slow workers are usable for ARM. Current aarch64 build requires 27G and armv6/7 requires 14G. Set requirements respectively to 30GB and 20GB. Signed-off-by: Guillaume Gardet <guillaume.gardet(a)arm.com> --- rpm/constraints.in | 27 +++++++++++++++++++++++++++ 1 file changed, 27 insertions(+) diff --git a/rpm/constraints.in b/rpm/constraints.in index 182a713478c..ad051931729 100644 --- a/rpm/constraints.in +++ b/rpm/constraints.in @@ -14,6 +14,33 @@ </hardware> </overwrite> +  + <overwrite> + <conditions> + <arch>aarch64</arch> +@BINARY_PACKAGES_XML@ + </conditions> + <hardware> + <disk> + <size unit="G">30</size> + </disk> + </hardware> + </overwrite> + +  + <overwrite> + <conditions> + <arch>armv7l</arch> + <arch>armv6l</arch> +@BINARY_PACKAGES_XML@ + </conditions> + <hardware> + <disk> + <size unit="G">20</size> + </disk> + </hardware> + </overwrite> +  <overwrite> <conditions> -- 2.23.0 -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-kernel+owner(a)opensuse.org

4 3

[opensuse-kernel] [PATCH 0/3] Lenovo Yoga C630
by Lee Jones 09 Sep '19

09 Sep '19

Here are 3 patches which ensure successful booting of the AArch64 based Lenovo Yoga C630 laptop, assuming [0] are enabled in your distro (a patch to enable them in the upstream defconfig is in -next). The other two patches are proper bug fixes. The first ensures the avoidance of a NULL dereference when booting with ACPI, the second ensures that an I2C transation do not cause a platform reboot. Although the DTS patch is not a strictly bug-fix is considered very low risk, but high reward (for Linaro Yoga C630 owners). NB: These patches have already been applied to Fedora earlier today. [0] CONFIG_I2C_QCOM_GENI=m CONFIG_FB_EFI=y CONFIG_PHY_QCOM_QUSB2=m Bjorn Andersson (1): arm64: dts: qcom: Add Lenovo Yoga C630 Lee Jones (2): soc: qcom: geni: Provide parameter error checking i2c: qcom-geni: Disable DMA processing on the Lenovo Yoga C630 arch/arm64/boot/dts/qcom/Makefile | 1 + .../boot/dts/qcom/sdm850-lenovo-yoga-c630.dts | 446 ++++++++++++++++++ drivers/i2c/busses/i2c-qcom-geni.c | 12 +- drivers/soc/qcom/qcom-geni-se.c | 6 + 4 files changed, 461 insertions(+), 4 deletions(-) create mode 100644 arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts -- 2.17.1 -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-kernel+owner(a)opensuse.org

3 6

[opensuse-kernel] Kernel constraints wrong on ARM
by Guillaume Gardet 09 Sep '19

09 Sep '19

Hi Michal, Your commit regarding update on _constraints for kernel for 5.3 https://kernel.opensuse.org/cgit/kernel-source/commit/?h=stable&id=527cb669… is wrong on ARM and leads to wait too long for kernel builds as it can be schedule on 2 workers only on OBS! Moreover, those 2 workers are on a single machine which is slow. According to kernel:Master values reported by OBS for ARM, 28G of disk space is enough for aarch64 and 15G is enough for armv6/armv7. Could you update _ constraints accordingly, please? Please note that the change was intended for 5.3+, but stable branch with 5.2.x is also affected. Thanks, Guillaume IMPORTANT NOTICE: The contents of this email and any attachments are confidential and may also be privileged. If you are not the intended recipient, please notify the sender immediately and do not disclose the contents to any other person, use it for any purpose, or store or copy the information in any medium. Thank you. -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-kernel+owner(a)opensuse.org

3 3

[opensuse-kernel] Commit "rpm/mkspec: Make building DTBs optional." breaks Tumbleweed for arm
by Guillaume Gardet 05 Sep '19

05 Sep '19

Hi Michal, With your commit "rpm/mkspec: Make building DTBs optional." https://kernel.opensuse.org/cgit/kernel-source/commit/?h=stable&id=7c057c84… latest Tumbleweed is broken because we have no more DTBs built. Could you re-enable DTB build for ARM (aarch64, armv7, armv6), please? Thanks, Guillaume IMPORTANT NOTICE: The contents of this email and any attachments are confidential and may also be privileged. If you are not the intended recipient, please notify the sender immediately and do not disclose the contents to any other person, use it for any purpose, or store or copy the information in any medium. Thank you. -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-kernel+owner(a)opensuse.org

5 11