December 2011 - openSUSE Kernel - openSUSE Mailing Lists

[opensuse-kernel] kernel-default-base-2.6.29-5.2.x86_64 rpm errors
by Dave Plater 18 Jul '24

18 Jul '24

Hi, I'm busy updating to the latest factory kernel and have received the following errors from kernel-default-base installation (I did insert a blank dvd during the installation of the rpm by zypper):- WARNING: /lib/modules/2.6.29-rc8-5-default/kernel/drivers/scsi/sd_mod.ko needs unknown symbol crc_t10dif WARNING: /lib/modules/2.6.29-rc8-5-default/kernel/drivers/scsi/sr_mod.ko needs unknown symbol register_cdrom WARNING: /lib/modules/2.6.29-rc8-5-default/kernel/drivers/scsi/sr_mod.ko needs unknown symbol cdrom_ioctl WARNING: /lib/modules/2.6.29-rc8-5-default/kernel/drivers/scsi/sr_mod.ko needs unknown symbol cdrom_media_changed WARNING: /lib/modules/2.6.29-rc8-5-default/kernel/drivers/scsi/sr_mod.ko needs unknown symbol cdrom_get_media_event WARNING: /lib/modules/2.6.29-rc8-5-default/kernel/drivers/scsi/sr_mod.ko needs unknown symbol cdrom_release WARNING: /lib/modules/2.6.29-rc8-5-default/kernel/drivers/scsi/sr_mod.ko needs unknown symbol cdrom_open WARNING: /lib/modules/2.6.29-rc8-5-default/kernel/drivers/scsi/sr_mod.ko needs unknown symbol unregister_cdrom WARNING: /lib/modules/2.6.29-rc8-5-default/kernel/drivers/scsi/sr_mod.ko needs unknown symbol cdrom_number_of_slots And then these errors which I think IIRC happened before when the kernel was first split into three:- Kernel image: /boot/vmlinuz-2.6.29-rc8-5-default Initrd image: /boot/initrd-2.6.29-rc8-5-default Root device: /dev/disk/by-id/ata-WDC_WD800JB-00JJC0_WD-WMAM9RA78067-part3 (/dev/sda3) (mounted on / as xfs) Resume device: /dev/disk/by-id/ata-WDC_WD800JB-00JJC0_WD-WMAM9RA78067-part2 (/dev/sda2) FATAL: Module processor not found. WARNING: no dependencies for kernel module 'processor' found. FATAL: Module thermal not found. WARNING: no dependencies for kernel module 'thermal' found. FATAL: Module ata_generic not found. WARNING: no dependencies for kernel module 'ata_generic' found. FATAL: Module piix not found. WARNING: no dependencies for kernel module 'piix' found. FATAL: Module ide_pci_generic not found. WARNING: no dependencies for kernel module 'ide_pci_generic' found. FATAL: Module fan not found. WARNING: no dependencies for kernel module 'fan' found. FATAL: Module xfs not found. WARNING: no dependencies for kernel module 'xfs' found. FATAL: Module usbhid not found. WARNING: no dependencies for kernel module 'usbhid' found. Kernel Modules: scsi_mod libata ata_piix edd ahci sd_mod usbcore ohci-hcd ehci-hcd uhci-hcd WARNING: /dev/shm/mkinitramfs.0drQsZ/mnt/lib/modules/2.6.29-rc8-5-default/kernel/drivers/scsi/sd_mod.ko needs unknown symbol crc_t10dif Features: block usb resume.userspace resume.kernel Bootsplash: openSUSE (1280x1024) 22669 blocks Should I open a bug report about the errors which are possibly from inserting a dvd while the kernel rpm was installing? Regards Dave P -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-kernel+help(a)opensuse.org

2 2

[opensuse-kernel] Re: ACPI problems, Dell XPS 15z laptop
by Cristian Rodríguez 05 Jan '12

05 Jan '12

On 25/12/11 18:07, Cristian Rodríguez wrote: > (please CC me your replies, I am not subscribed) > > Hi: > > The laptop in $SUBJECT freezes at boot time, at random points sometimes > after > > [FIRMWARE BUG] ACPI(PEGP) defines _DOD but not _DOS > > But in other ocassions, just after udev attempts to mount filesystems. > > Using the following boot options make the system boot and work somewhat > stable. > > (these are single options, not combined) > > - acpi=noirq > > - pci=noacpi --> with this option I get warnings telling me to try > "usepirqmask..." > > - nox2apic > > - intremap=off > > This is a very recent sandy bridge system, the only clues I get from the > log is: > > "Not all IO-APIC's listed under remapping hardware > x2apic not enabled, IRQ remapping init failed" Heh, today I tested a crazy theory I had about this problem, turned out to be somewhat accurate.. it is not that the machine that hangs always, but it deceivingly "appears" to hang as I cannot get past the cryptsetup password prompt.. it is the keyboard controller that becomes non responsive, that 's it either before the "prompt" (where it hangs) or right after showing it. (in that scenario the USB port works, as plugin and removing a device shows the relevant events in the console) It is random, let's say, the USB port works twice every three boots. -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-kernel+owner(a)opensuse.org

3 4

[opensuse-kernel] Problems booting laptop Dell XPS 15z
by Cristian Rodríguez 04 Jan '12

04 Jan '12

Hi: I got this new laptop with openSUSE 12.1 and so far cannot successfully boot it :( First, it requires acpi=noirq and i915.semaphores=1 to make it pass the loader screen , otherwise it freezes completely... I have a remaining issue after applying those boot options.. as soon as the system starts the OS boot sequence (works just fine at the boot prompt), the USB ports turns off making impossible for me to press the USB device where a large, impossible to memorize password is stored, consequence of that is I cannot unlock the encrypted root volume ;-( Any hints how to make the USB port power up ? -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-kernel+owner(a)opensuse.org

4 27

[opensuse-kernel] cleancache and zcache not working
by Cristian Rodríguez 02 Jan '12

02 Jan '12

Hi: I cannot figure out how to enable zcache. first there is no /sys/kernel/mm/cleancache even though the -desktop kernel has CONFIG_CLEANCACHE=y .. modprobe'ing zcache or adding it to the initrd only causes the usual disclaimer to be shown, telling you that it is in the stagging directory.. How I can really use it ? cheers. ! -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-kernel+owner(a)opensuse.org

2 2

[opensuse-kernel] Change openSUSE 12.1 kernel configuration
by Larry Finger 27 Dec '11

27 Dec '11

In the .config for kernel 3.1 in oS 12.1, the following parameters are found: CONFIG_RT2800USB=m CONFIG_RT2800USB_RT33XX=y # CONFIG_RT2800USB_RT35XX is not set CONFIG_RT2800USB_RT53XX=y # CONFIG_RT2800USB_UNKNOWN is not set CONFIG_RT2800_LIB=m Parameter RT2800USB_RT35XX should be set to "y". AFAIK, CONFIG_RT2800USB_UNKNOWN can be left unset. Thanks, Larry -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-kernel+owner(a)opensuse.org

1 0

[opensuse-kernel] e100 not finding PHY after rebooting from Windows
by Stefan Seyfried 27 Dec '11

27 Dec '11

Hi all, probably not really a topic for opensuse-kernel, but you guys can hopefully tell me whom to contact... Hardware: * lenovo ideacentre q150, atom d525, nvidia ion2 chipset * ethernet: e100 82552 Software: * opensuse 12.1 (with or without KOTD does not matter) * no proprietary nvidia drivers (nouveau does just fine) * no BIOS update available Problem: * ethernet e100 works fine if cold booted from *power plug removed*, fails if rebooted from Windows. Shutting down windows and powering up does not help, only removing the power supply does help * debug=16 shows that all register reads in the botched case are something like 0x????FFFF and finally the PHY is "unknown" and thus the interface does not work. The latest e100 driver from the intel site is > 5 years old and has a lower version number than the one in the kernel, so I did not even try it. Once I'm home again I can wire up the machine and provide the different entries from the working and non-working case after "modprobe e100 debug=16" I'm grateful for any hints :-) -- Stefan Seyfried "Dispatch war rocket Ajax to bring back his body!" -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-kernel+owner(a)opensuse.org

3 4

[opensuse-kernel] MMC problems, device doesnt show up.
by Cristian Rodríguez 24 Dec '11

24 Dec '11

Hi: In this xps 15z laptop Im having (another) weird problem, Initially I thought that the MMC card reader was not supported as this fact was mentioned in some wikis. However it works well, BUT only when a memory card is present at boot time, otherwise the device never shows up, it disappears from lspci, modprobing the needed drivers have no effect. It is kinda like the PCI device is powered off at boot and never comes back when a card is plugged in.. what could be causing this issue ? -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-kernel+owner(a)opensuse.org

1 2

[opensuse-kernel] Get rid of i386 pae kernel
by Thomas Renninger 23 Dec '11

23 Dec '11

Hi, can we get rid of this one, please. Further cleanups could be: - Make i386 default a preemptive smp kernel (similar to what -desktop is right now). - Get rid of the current -desktop flavor No 64 bit capable platform should be run with an i386 based kernel. If really necessary, people should run a 32 bit environment on top of a 64 bit kernel. Thus we may even be able to remove PAE support to enforce this. Only use case I see for i386 kernels are (non-pae, 32 bit only) Atom boards or old, not 64-bit capable desktops/laptops where you typically want to run a -desktop flavor. On old i386 servers where PAE made sense, you better run a 10.1 or older openSUSE dist... I wonder what the current i386 kernel policy is: - default (smp, non-preemptive, no pae) - pae (smp, non-preemptive, pae) - desktop (smp, preemptive, pae) Do -default and -desktop only exist for compatibility? Only needed flavor should be: - default (smp, preemptive, no pae) What do you think? Thomas -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-kernel+owner(a)opensuse.org

5 6

[opensuse-kernel] iSCSI problems since 11.4
by ariel sabiguero yawelak 23 Dec '11

23 Dec '11

Hi list. I have been experiencing problems with iSCSI for a while. Until 11.3, everything was fine. 11.4 and 12.1 present problems. We start with a very simple 12.1 OpenSuSE installation: zypper install iscsiadm Afterward, we take a 100MB file /varios/01/iSCSI/archivaldo and add it to the ietd.conf /editar ietd.conf Target iqn.2011-10.yyyy.xxxx:fila Lun 0 Path=/varios/01/iSCSI/archivaldo,Type=fileio Afterward, we start iscsitarget, ~ # rciscsitarget start Starting iSCSI target service: FATAL: Error inserting crc32c_intel (/lib/modules/2.6.37.6-0.7-desktop/kernel/arch/x86/crypto/crc32c-intel.ko): No such device The error can be removed from the init script, but is irrelevant. The service works perfectly the first time it is accessed from a client machine. After we reboot 2 or 3 times the machine, we cannot access anymore to the lun and get the following error on the /var/log/messages Dec 5 10:14:18 linux-akxl iscsitarget[3704]: Starting iSCSI target service: FATAL: Error inserting crc32c_intel (/lib/modules/3.1.0-1.2-desktop/kernel/arch/x86/crypto/crc32c-intel.ko): No such device Dec 5 10:14:18 linux-akxl ietd: unable to lock pid file: Resource temporarily unavailable Dec 5 10:14:18 linux-akxl iscsitarget[3704]: ..done Dec 5 10:26:01 linux-akxl kernel: [ 2640.195710] iscsi_trgt: BUG at /home/abuild/rpmbuild/BUILD/iscsitarget-1.4.20-svn/obj/desktop/iscsi.c:392 assert(req->tio) Dec 5 10:26:01 linux-akxl kernel: [ 2640.208486] Pid: 2595, comm: istiod1 Not tainted 3.1.0-1.2-desktop #1 Dec 5 10:26:01 linux-akxl kernel: [ 2640.208492] Call Trace: Dec 5 10:26:01 linux-akxl kernel: [ 2640.208556] [<ffffffff810043fa>] dump_trace+0xaa/0x2b0 Dec 5 10:26:01 linux-akxl kernel: [ 2640.208567] [<ffffffff81582a4a>] dump_stack+0x69/0x6f Dec 5 10:26:01 linux-akxl kernel: [ 2640.208589] [<ffffffffa0258c32>] send_data_rsp+0xd2/0xe0 [iscsi_trgt] Dec 5 10:26:01 linux-akxl kernel: [ 2640.208623] [<ffffffffa0260f6f>] disk_execute_cmnd.part.0+0x18f/0x1d0 [iscsi_trgt] Dec 5 10:26:01 linux-akxl kernel: [ 2640.209372] [<ffffffffa0260fc9>] disk_execute_cmnd+0x19/0x20 [iscsi_trgt] Dec 5 10:26:01 linux-akxl kernel: [ 2640.209443] [<ffffffffa025be00>] worker_thread+0x160/0x2c0 [iscsi_trgt] Dec 5 10:26:01 linux-akxl kernel: [ 2640.209466] [<ffffffff81075c8e>] kthread+0x7e/0x90 Dec 5 10:26:01 linux-akxl kernel: [ 2640.209495] [<ffffffff815a5474>] kernel_thread_helper+0x4/0x10 Dec 5 10:26:01 linux-akxl kernel: [ 2640.210798] ------------[ cut here ]------------ Dec 5 10:26:01 linux-akxl kernel: [ 2640.211052] kernel BUG at /home/abuild/rpmbuild/BUILD/iscsitarget-1.4.20-svn/obj/desktop/iscsi.c:392! Dec 5 10:26:01 linux-akxl kernel: [ 2640.211052] invalid opcode: 0000 [#1] PREEMPT SMP Dec 5 10:26:01 linux-akxl kernel: [ 2640.211052] CPU 0 Dec 5 10:26:01 linux-akxl kernel: [ 2640.211052] Modules linked in: ib_iser rdma_cm ib_cm iw_cm ib_sa ib_mad ib_core ib_addr iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi iscsi_ibft iscsi_boot_sysfs md5 iscsi_trgt ip6t_LOG xt_tcpudp xt_pkttype ipt_LOG xt_limit af_packet ip6t_REJECT nf_conntrack_ipv6 nf_defrag_ipv6 ip6table_raw xt_NOTRACK ipt_REJECT iptable_raw iptable_filter ip6table_mangle nf_conntrack_netbios_ns nf_conntrack_broadcast nf_conntrack_ipv4 nf_defrag_ipv4 ip_tables xt_conntrack vboxsf nf_conntrack ip6table_filter ip6_tables x_tables mperf dm_mod snd_intel8x0 ppdev snd_ac97_codec ac97_bus snd_pcm parport_pc parport snd_timer joydev i2c_piix4 vboxguest snd soundcore e1000 snd_page_alloc sr_mod pcspkr sg battery button ac cdrom autofs4 processor thermal_sys ata_generic Dec 5 10:26:01 linux-akxl kernel: [ 2640.211052] Dec 5 10:26:01 linux-akxl kernel: [ 2640.211052] Pid: 2595, comm: istiod1 Not tainted 3.1.0-1.2-desktop #1 innotek GmbH VirtualBox Dec 5 10:26:01 linux-akxl kernel: [ 2640.211052] RIP: 0010:[<ffffffffa0258c32>] [<ffffffffa0258c32>] send_data_rsp+0xd2/0xe0 [iscsi_trgt] Dec 5 10:26:01 linux-akxl kernel: [ 2640.211052] RSP: 0018:ffff88001d931e40 EFLAGS: 00010286 Dec 5 10:26:01 linux-akxl kernel: [ 2640.211052] RAX: 0000000000000000 RBX: ffff88001d9fe198 RCX: 0000000000000000 Dec 5 10:26:01 linux-akxl kernel: [ 2640.211052] RDX: ffff88001d931fd8 RSI: ffff88001e36a480 RDI: ffff88001f8124c0 Dec 5 10:26:01 linux-akxl kernel: [ 2640.211052] RBP: 0000000000000000 R08: ffff88001d930000 R09: 0000000000204530 Dec 5 10:26:01 linux-akxl kernel: [ 2640.211052] R10: 0000000000000000 R11: 0000000000000001 R12: ffff88001d152dd8 Dec 5 10:26:01 linux-akxl kernel: [ 2640.211052] R13: ffff88001e36a480 R14: ffff88001e36a480 R15: ffff88001d152de8 Dec 5 10:26:01 linux-akxl kernel: [ 2640.211052] FS: 00007f6ffa1c7700(0000) GS:ffff88001f800000(0000) knlGS:0000000000000000 Dec 5 10:26:01 linux-akxl kernel: [ 2640.211052] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b Dec 5 10:26:01 linux-akxl kernel: [ 2640.211052] CR2: 00007fb2c7ebe000 CR3: 000000001e3a5000 CR4: 00000000000006f0 Dec 5 10:26:01 linux-akxl kernel: [ 2640.211052] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 Dec 5 10:26:01 linux-akxl kernel: [ 2640.211052] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Dec 5 10:26:01 linux-akxl kernel: [ 2640.211052] Process istiod1 (pid: 2595, threadinfo ffff88001d930000, task ffff88001e36a480) Dec 5 10:26:01 linux-akxl kernel: [ 2640.211052] Stack: Dec 5 10:26:01 linux-akxl kernel: [ 2640.211052] ffff88001d9fe198 ffff88001d9fe198 ffff88001db8c000 ffffffffa0260f6f Dec 5 10:26:01 linux-akxl kernel: [ 2640.211052] ffff88001d9fe198 ffffffffa0260fc9 ffff88001d152dc0 ffffffffa025be00 Dec 5 10:26:01 linux-akxl kernel: [ 2640.211052] ffff88001d934380 ffff88001d9fe198 0000000000000000 ffff88001e36a480 Dec 5 10:26:01 linux-akxl kernel: [ 2640.211052] Call Trace: Dec 5 10:26:01 linux-akxl kernel: [ 2640.211052] [<ffffffffa0260f6f>] disk_execute_cmnd.part.0+0x18f/0x1d0 [iscsi_trgt] Dec 5 10:26:01 linux-akxl kernel: [ 2640.211052] [<ffffffffa0260fc9>] disk_execute_cmnd+0x19/0x20 [iscsi_trgt] Dec 5 10:26:01 linux-akxl kernel: [ 2640.211052] [<ffffffffa025be00>] worker_thread+0x160/0x2c0 [iscsi_trgt] Dec 5 10:26:01 linux-akxl kernel: [ 2640.211052] [<ffffffff81075c8e>] kthread+0x7e/0x90 Dec 5 10:26:01 linux-akxl kernel: [ 2640.211052] [<ffffffff815a5474>] kernel_thread_helper+0x4/0x10 Dec 5 10:26:01 linux-akxl kernel: [ 2640.211052] Code: e9 64 fd ff ff 48 c7 c1 99 48 26 a0 ba 88 01 00 00 48 c7 c6 b8 51 26 a0 48 c7 c7 00 52 26 a0 31 c0 e8 b8 c6 32 e1 e8 af 9d 32 e1 <0f> 0b 66 66 66 2e 0f 1f 84 00 00 00 00 00 41 56 48 85 ff 41 55 Dec 5 10:26:01 linux-akxl kernel: [ 2640.211052] RIP [<ffffffffa0258c32>] send_data_rsp+0xd2/0xe0 [iscsi_trgt] Dec 5 10:26:01 linux-akxl kernel: [ 2640.211052] RSP <ffff88001d931e40> Dec 5 10:26:01 linux-akxl kernel: [ 2640.323718] ---[ end trace 71cece1753d1251d ]--- Dec 5 10:26:43 linux-akxl kernel: [ 2682.069516] iscsi_trgt: Abort Task (01) issued on tid:1 lun:0 by sid:1407374904328704 (Function Complete) any idea? I would appreciate all support available as 11.3 is about to expire. best regards and happy holidays ariel -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-kernel+owner(a)opensuse.org

2 1

Re: [opensuse-kernel] Problems booting laptop Dell XPS 15z
by Cristian Rodríguez 23 Dec '11

23 Dec '11

On 10/12/11 00:05, Thomas Renninger wrote: > On Saturday 10 December 2011 03:48:26 Cristian Rodríguez wrote: >> On 09/12/11 23:41, Thomas Renninger wrote: >> >>> Dell XPS 15z >>> >>> -> is this a company one? >> >> Nope, personal laptop. >> >>> This sucks so much... >> >> Yeah, but apparently the machine is now working somewhat stable booting >> with pci=noacpi .. I wonder what is the more lightweight hammer, >> acpI=noirq or pci=noacpi ? > > Iirc this should not matter much. Update: at least with the latest BIOS, and latest kernel the following single options work (not combined) pci=noacpi --> It works acpi=noirq --> it works with the side effect that ASPM doesnt work. intremap=off --> Works No ASPM. nox2apic --> works, aspm fails. Maybe we are talking about this ? https://lkml.org/lkml/2011/12/13/3 ?? -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-kernel+owner(a)opensuse.org

1 0