August 2011 - openSUSE Kernel - openSUSE Mailing Lists

[opensuse-kernel] kernel-default-base-2.6.29-5.2.x86_64 rpm errors
by Dave Plater 18 Jul '24

18 Jul '24

Hi, I'm busy updating to the latest factory kernel and have received the following errors from kernel-default-base installation (I did insert a blank dvd during the installation of the rpm by zypper):- WARNING: /lib/modules/2.6.29-rc8-5-default/kernel/drivers/scsi/sd_mod.ko needs unknown symbol crc_t10dif WARNING: /lib/modules/2.6.29-rc8-5-default/kernel/drivers/scsi/sr_mod.ko needs unknown symbol register_cdrom WARNING: /lib/modules/2.6.29-rc8-5-default/kernel/drivers/scsi/sr_mod.ko needs unknown symbol cdrom_ioctl WARNING: /lib/modules/2.6.29-rc8-5-default/kernel/drivers/scsi/sr_mod.ko needs unknown symbol cdrom_media_changed WARNING: /lib/modules/2.6.29-rc8-5-default/kernel/drivers/scsi/sr_mod.ko needs unknown symbol cdrom_get_media_event WARNING: /lib/modules/2.6.29-rc8-5-default/kernel/drivers/scsi/sr_mod.ko needs unknown symbol cdrom_release WARNING: /lib/modules/2.6.29-rc8-5-default/kernel/drivers/scsi/sr_mod.ko needs unknown symbol cdrom_open WARNING: /lib/modules/2.6.29-rc8-5-default/kernel/drivers/scsi/sr_mod.ko needs unknown symbol unregister_cdrom WARNING: /lib/modules/2.6.29-rc8-5-default/kernel/drivers/scsi/sr_mod.ko needs unknown symbol cdrom_number_of_slots And then these errors which I think IIRC happened before when the kernel was first split into three:- Kernel image: /boot/vmlinuz-2.6.29-rc8-5-default Initrd image: /boot/initrd-2.6.29-rc8-5-default Root device: /dev/disk/by-id/ata-WDC_WD800JB-00JJC0_WD-WMAM9RA78067-part3 (/dev/sda3) (mounted on / as xfs) Resume device: /dev/disk/by-id/ata-WDC_WD800JB-00JJC0_WD-WMAM9RA78067-part2 (/dev/sda2) FATAL: Module processor not found. WARNING: no dependencies for kernel module 'processor' found. FATAL: Module thermal not found. WARNING: no dependencies for kernel module 'thermal' found. FATAL: Module ata_generic not found. WARNING: no dependencies for kernel module 'ata_generic' found. FATAL: Module piix not found. WARNING: no dependencies for kernel module 'piix' found. FATAL: Module ide_pci_generic not found. WARNING: no dependencies for kernel module 'ide_pci_generic' found. FATAL: Module fan not found. WARNING: no dependencies for kernel module 'fan' found. FATAL: Module xfs not found. WARNING: no dependencies for kernel module 'xfs' found. FATAL: Module usbhid not found. WARNING: no dependencies for kernel module 'usbhid' found. Kernel Modules: scsi_mod libata ata_piix edd ahci sd_mod usbcore ohci-hcd ehci-hcd uhci-hcd WARNING: /dev/shm/mkinitramfs.0drQsZ/mnt/lib/modules/2.6.29-rc8-5-default/kernel/drivers/scsi/sd_mod.ko needs unknown symbol crc_t10dif Features: block usb resume.userspace resume.kernel Bootsplash: openSUSE (1280x1024) 22669 blocks Should I open a bug report about the errors which are possibly from inserting a dvd while the kernel rpm was installing? Regards Dave P -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-kernel+help(a)opensuse.org

2 2

[opensuse-kernel] [patch #2 0/5] scripts/sequence-patch.sh: Add some useful options
by Jeff Mahoney 05 Oct '11

05 Oct '11

Hi all - There are a few things I do every time I expand the source tree with sequence-patch.sh. Or, rather, things I should do and forget to do a lot. The first I always remember to do: Copy the config I want to test with to my build directory. The second I forget more often than not: Expand the kABI references into my build directory. One of the things that bites me occasionally is when there are kABI changes that go un-noticed until the automated build checker flags them and sends me an email yelling at me for my carelessness. This patch adds three options to scripts/sequence-patch.sh to take care of these automatically. --build-dir=PATH allows you to specify the build directory you'll be using. It will create the directory if it doesn't exist. It defaults to $PATCH_DIR. --config=ARCH-FLAVOR allows you to specify the config you'll use. It will copy the config to your build directory. It is not a fatal error if the config does not exist. It will just not copy one. --kabi allows you to direct sequence-patch to expand the kABI references into your build directory. Since the references are arch/flavor specific, it depends on --config=ARCH-FLAVOR. It is not a fatal error if the kABI reference doesn't exist since this is always the case in the master branch. The --build-dir PATH is subject to shell expansion. It is expanded late enough in the script that most variables should be available. There are also three new variables available when --config is used: $CONFIG contains the --config contents. $CONFIG_ARCH contains the arch part of the config. $CONFIG_FLAVOR contains the flavor part. For reference, I have this in my .bashrc: export SEQUENCE_PATCH_ARGS="--config=x86_64-desktop --build-dir=~/src/scratch/build/\$CONFIG_ARCH/linux-\$SRCVERSION-\$TAG-\$CONFIG_FLAVOR --kabi" I've also added patches for --ctags and --cscope which will automatically generate the databases for either of those tools in the build directory after the source tree is expanded. - Issues addressed in patchset #2: - Help text is now a here document for easy addition of more documentation - Explanation of which variables are allowed by --build-dir - Missing rpm/modversions script is not an error on older branches - Missing symvers files are not errors - Uses true/false for simple feature flags -Jeff -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-kernel+help(a)opensuse.org

5 13

[opensuse-kernel] dmfe /var/log/messages spam
by Bjørn Lie 30 Aug '11

30 Aug '11

Due to me apparently offending Thor (deity of thunder and lightning), and therefore having to go into my sparepartsbox, I now have a 05:01.0 Ethernet controller: Davicom Semiconductor, Inc. 21x4x DEC-Tulip compatible 10/100 Ethernet (rev 10) Subsystem: Davicom Semiconductor, Inc. 21x4x DEC-Tulip compatible 10/100 Ethernet Flags: bus master, medium devsel, latency 64, IRQ 16 I/O ports at ec00 [size=128] Memory at f7fff000 (32-bit, non-prefetchable) [size=128] Expansion ROM at f7f80000 [disabled] [size=256K] Capabilities: [50] Power Management version 1 Kernel driver in use: dmfe in my box. The card/driver seems to work just fine, however it spams my /var/log/messages with [ 6233.528227] dmfe: tdes0=7fff0000 [ 6237.651056] dmfe: tdes0=7fff0000 [ 6237.651060] dmfe: tdes0=7fff0000 [ 6237.696019] dmfe: tdes0=7fff0000 [ 6237.696022] dmfe: tdes0=7fff0000 [ 6238.028810] dmfe: tdes0=7fff0000 [ 6238.028814] dmfe: tdes0=7fff0000 [ 6238.073544] dmfe: tdes0=7fff0000 [ 6238.073547] dmfe: tdes0=7fff0000 a couple of times a second. The "adress" seems to correspond with where the memory is located. Any pointers as to what I can do to mute the bugger? I have tried to use the tulip driver, but alas ref bnc (bnc#537016) it does not work. kernel in use embla:~ # uname -rvm 3.0.0-rc6-2-desktop #1 SMP PREEMPT Wed Jul 6 22:58:01 UTC 2011 (56e99da) x86_64 //Bjørn -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-kernel+help(a)opensuse.org

3 9

[opensuse-kernel] 3.1 kernel in Kernel:HEAD
by Jeff Mahoney 24 Aug '11

24 Aug '11

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi all - Earlier today, I updated the kernel in the master git repo / Kernel:HEAD project to 3.1-rc3. Xen is disabled as it usually is at this stage. It builds. That's about all I'll guarantee. :) - -Jeff - -- Jeff Mahoney SUSE Labs -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.18 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/ iEYEARECAAYFAk5Vd00ACgkQLPWxlyuTD7IWkwCfd1xuOhGcdS7Zw3yH7hpwse5G 5/cAoKH4rxJ1OlfcstoThcaK7CZXPysI =r8+m -----END PGP SIGNATURE----- -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-kernel+help(a)opensuse.org

1 0

[opensuse-kernel] kernel packages and build-compare
by Cristian Rodríguez 24 Aug '11

24 Aug '11

Hi all :) kernel packages are still unfriendly to build-compare, causing us testers having to download unchanged,large binary packages on update for no reason There are two problems. 1. kernel-default.x86_64: W: file-contains-date-and-time /lib/modules/3.0.0-7-default/kernel/fs/ubifs/ubifs.ko Your file uses __DATE and __TIME__ this causes the package to rebuild when not needed It is just one remaining in the ubifs module. The second issue is somewhere in the pre/post, the nvr variable changes all the time --- /tmp/tmp.9i2CeizOnc 2011-08-04 20:37:46.965592003 +0000 +++ /tmp/tmp.BkE5Rahqtz 2011-08-04 20:37:47.005592003 +0000 @@ -81,7 +81,7 @@ if [ 1 = 1 ]; then /bin/bash -${-/e/} $wm2 --add-kernel 3.0.0-7-default else - nvr=kernel-default-base-3.0.0-7.1 + nvr=kernel-default-base-3.0.0-7.2 rpm -ql $nvr | /bin/bash -${-/e/} $wm2 --add-kernel-modules 3.0.0-7-default fi else Can the kernel version be determined at runtime instead of at compile time so we never get this issue anymore ? applies to KMPs as well. Cheers. -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-kernel+help(a)opensuse.org

3 5

Re: [opensuse-kernel] Kernel Issue Blocking Deployment
by Dave Richards 19 Aug '11

19 Aug '11

Dave, Thanks for the ideas, those issues have already been eliminated. I kind of am aware of the problem areas that arise and already changed them. I am only using NFS3 (4 gave us some problems), and already turned off IPv6 The high level of drops: eth0 Link encap:Ethernet HWaddr 00:1C:C4:93:DF:72 inet addr:128.222.99.243 Bcast:128.222.255.255 Mask:255.255.0.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:62047738 errors:0 dropped:168228 overruns:0 frame:0 I thought of another idea, and went to the console and tried to vi a file and it's slow there as well. That rules out networking. Something is definitely wrong at a very low level with disk and networking. Double-check of NFS 4 not being used: nfsstat -4 Client rpc stats: calls retrans authrefrsh 1386788 0 1386837 Client nfs v4: null read write commit open open_conf 0 0% 0 0% 0 0% 0 0% 0 0% 0 0% open_noat open_dgrd close setattr fsinfo renew 0 0% 0 0% 0 0% 0 0% 0 0% 0 0% On Thu, 2011-08-18 at 16:40 +0100, Dave Howorth wrote: > Dave Richards wrote: > > Good morning all, > > > > I work for the City of Largo, Florida and we are trying to get > > the last push to go live with an OpenSuse 11.4 server and the GNOME > > desktop. Unfortunately we seem to have a low level problem that is > > keeping that from happening. > > No idea whether they're relevant but two issues that people seem to have > tripped over quite a lot with 11.4 are: > > - now defaults to NFS v4, causing incompatibilities with some clients > - IPv6 enabled means problems if DNS servers are broken. > > Cheers, Dave Disclaimer: According to Florida Public Records Law, email correspondence to and from the City of Largo, including email addresses and other personal information, is public record and must be made available to the public and media upon request, unless otherwise exempt by the Public Records Law. -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-kernel+help(a)opensuse.org

4 5

[opensuse-kernel] Study on the configuration of the Linux kernel
by Arnaud Hubaux 19 Aug '11

19 Aug '11

Dear openSUSE users, we are a team of researchers from the GSD Lab of the University of Waterloo (ON, Canada). We do research on configuration methods and algorithms and are conducting a study on the problems faced by users during the configuration of the Linux kernel. We would greatly appreciate it if you could answer this questionnaire: https://docs.google.com/spreadsheet/viewform?formkey=dHJrQ1B6OXVCRTRmbGJ2Zl… It should not take you more than 15 minutes to complete. Thank you very much for your contribution. Arnaud Hubaux, University of Namur/University of Waterloo Yingfei Xiong, University of Waterloo -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-kernel+help(a)opensuse.org

3 5

[opensuse-kernel] Kernel Issue Blocking Deployment
by Dave Richards 18 Aug '11

18 Aug '11

Good morning all, I work for the City of Largo, Florida and we are trying to get the last push to go live with an OpenSuse 11.4 server and the GNOME desktop. Unfortunately we seem to have a low level problem that is keeping that from happening. I mentioned some of it on a recent blog post: http://davelargo.blogspot.com/2011/08/opensuse-114-woes.html The server seems to have some kind of scheduling problem and acts like a machine that is swapping, yet nothing is showing up on top and we appear to have plenty of memory. Even local disk access is slow, and the networking layer is showing lots of packets being lost. When I have about 10 users on, the machine is very fast and works as expected. When I get to about 40, it has a huge slowdown and runs poorly. With 40 users on, when I "vi /etc/hosts" it sits and blinks for 3 seconds before the file appears. Navigation is sluggish. An older server with older OpenSuse can run 200 users easily with no performance problems. The blog comments had a few tips, which I have tried with no changes in performance. It just really feels like a low level bug/problem that is not fixable by me by settings or tuning. Top shows plenty of CPU and RAM. If anyone wants to email me with tips or chat with me on the IRC, I'm logged in as dave_largo. I noticed that some newer kernels (3.0.1) are in the experimental channels, if that will resolve my issues I can certainly try and upgrade. Current kernel is: kernel-desktop-2.6.37.6-0.5.1.x86_64 Thanks in advance, right now I'm completely at a road block. Disclaimer: According to Florida Public Records Law, email correspondence to and from the City of Largo, including email addresses and other personal information, is public record and must be made available to the public and media upon request, unless otherwise exempt by the Public Records Law. -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-kernel+help(a)opensuse.org

5 4

[opensuse-kernel] wake-up after suspend fails on Asus M4A77T
by pmlists＠free.fr 14 Aug '11

14 Aug '11

Hello, My system (openSUSE 11.4) does not wake up after suspend to ram (S3). Here the commands, that work on many other systems with Asus-boards, but not on the M477T: echo 0 >/sys/class/rtc/rtc0/wakealarm date -d "now + 1 minute" +%s >/sys/class/rtc/rtc0/wakealarm s2ram -f Instead of waking up automatically after 1 minute, I must press the power button to wake up the system. It's perhaps a kernel issue, because when specifying the wake-up time directly in the bios, it works. Where could be the problem? TIA for any help! -- Peter -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-kernel+help(a)opensuse.org

1 0

[opensuse-kernel] Configuration change requested for kernel 3.0
by Larry Finger 13 Aug '11

13 Aug '11

With Build 0186 of the KDE Live CD and kernel 3.0, no driver for the PCI version of the Ralink 2800 devices is configured as shown below: larry@linux-4khf:~> zcat /proc/config.gz | grep 2800 # CONFIG_RT2800PCI is not set CONFIG_RT2800USB=m CONFIG_RT2800USB_RT33XX=y # CONFIG_RT2800USB_RT35XX is not set CONFIG_RT2800USB_RT53XX=y # CONFIG_RT2800USB_UNKNOWN is not set CONFIG_RT2800_LIB=m larry@linux-4khf:~> I think this driver was not selected in earlier versions because of a conflict with the staging driver rt2860; however, that driver was removed in 3.0. Thanks, Larry -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-kernel+help(a)opensuse.org

2 5

[opensuse-kernel] WARNING: at /usr/src/packages/BUILD/kernel-desktop-3.0.0/linux-3.0/fs/dcache.c:2549 prepend_path+0x174/0x180()
by Ismail Donmez 12 Aug '11

12 Aug '11

Hi; Here is an interesting warning from Factory: [68163.607320] ------------[ cut here ]------------ [68163.607325] WARNING: at /usr/src/packages/BUILD/kernel-desktop-3.0.0/linux-3.0/fs/dcache.c:2549 prepend_path+0x174/0x180() [68163.607328] Hardware name: OptiPlex 990 [68163.607330] Root dentry has weird name <> [68163.607332] Modules linked in: nls_iso8859_1 nls_cp437 vfat fat joydev nfs lockd fscache auth_rpcgss nfs_acl sunrpc vboxpci vboxnetadp vboxnetflt autofs4 vboxdrv af_packet edd snd_pcm_oss snd_mixer_oss cpufreq_conservative cpufreq_userspace microcode cpufreq_powersave snd_seq acpi_cpufreq mperf pciehp pci_hotplug snd_hda_codec_realtek hdj_mod snd_rawmidi snd_seq_device dcdbas kvm_intel kvm e1000e snd_hda_intel iTCO_wdt snd_hda_codec sr_mod i2c_i801 iTCO_vendor_support cdrom mei(C) sg snd_hwdep snd_pcm snd_timer snd soundcore snd_page_alloc video button pcspkr serio_raw container radeon ttm drm_kms_helper drm i2c_algo_bit fan processor thermal thermal_sys [last unloaded: preloadtrace] [68163.607384] Pid: 22422, comm: nepomukindexer Tainted: G WC 3.0.0-2-desktop #1 [68163.607387] Call Trace: [68163.607397] [<ffffffff81004414>] dump_trace+0xa4/0x290 [68163.607403] [<ffffffff81566c1c>] dump_stack+0x69/0x6f [68163.607409] [<ffffffff81056e7b>] warn_slowpath_common+0x7b/0xc0 [68163.607414] [<ffffffff81056f75>] warn_slowpath_fmt+0x45/0x50 [68163.607418] [<ffffffff811686e4>] prepend_path+0x174/0x180 [68163.607424] [<ffffffff8116bee1>] sys_getcwd+0x111/0x230 [68163.607430] [<ffffffff81586992>] system_call_fastpath+0x16/0x1b [68163.607436] [<00007f2a2c363d22>] 0x7f2a2c363d21 [68163.607438] ---[ end trace b4cd064b7c58440f ]--- Linux kutu.suse.de 3.0.0-2-desktop #1 SMP PREEMPT Fri Jul 22 08:28:15 UTC 2011 (50c05d7) x86_64 x86_64 x86_64 GNU/Linux Any ideas? Regards. -- İsmail Dönmez - openSUSE Booster SUSE LINUX Products GmbH Maxfeldstr. 5, 90409 Nürnberg, Germany GF: Jeff Hawn, Jennifer Guild, Felix Imendörffer, HRB 16746 (AG Nürnberg) -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-kernel+help(a)opensuse.org

1 0

[opensuse-kernel] How do you adjust or generate the series.conf for linux kernel v3.0.1 so it can compile.
by doiggl＠velocitynet.com.au 09 Aug '11

09 Aug '11

Hello How do you adjust or generate the series.conf for linux kernel v3.0.1 so it can compile. project is located at -- https://build.opensuse.org/package/show?package=kernel-default&project=home… So far this this patch has failed in series.conf *** patch ../patches.fixes/SCSI-fix-crash-in-scsi_dispatch_cmd.patch failed *** Thanks Glenn -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-kernel+help(a)opensuse.org

4 7

[opensuse-kernel] 11.3 & 11.4 update scheduling
by Felix Miata 04 Aug '11

04 Aug '11

I see the last kernels on update were in April. When are next scheduled, or have they been scheduled? Finally 15 month old https://bugzilla.novell.com/show_bug.cgi?id=584493 was fixed "Monday", and I'm anxious to have access to properly working kernel-desktop & kernel-default in these installations. Even Tumbleweed & stable/standard have had no new kernel builds since before "Monday's" fix. -- "The wise are known for their understanding, and pleasant words are persuasive." Proverbs 16:21 (New Living Translation) Team OS/2 ** Reg. Linux User #211409 ** a11y rocks! Felix Miata *** http://fm.no-ip.com/ -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-kernel+help(a)opensuse.org

5 9

[opensuse-kernel] Misconfiguration in 12.1 MS3 kernel for RT2800 wireless devices
by Larry Finger 04 Aug '11

04 Aug '11

In the 3.0 kernel in openSUSE 12.1 MS3, the rt2800 devices are misconfigured. In previous versions, there was a conflict between rt2800pci and rt2860sta, thus rt2800pci was not selected. With 3.0, the rt2860sta code was removed from the kernel, thus rt2800pci needs to be added back into the configuration; however, that change was missed. larry@linux-7kpw:~> zcat /proc/config.gz | grep 2800 # CONFIG_RT2800PCI is not set CONFIG_RT2800USB=m CONFIG_RT2800USB_RT33XX=y # CONFIG_RT2800USB_RT35XX is not set CONFIG_RT2800USB_RT53XX=y # CONFIG_RT2800USB_UNKNOWN is not set CONFIG_RT2800_LIB=m larry@linux-7kpw:~> Thanks, Larry -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-kernel+help(a)opensuse.org

1 0