September 2010 - openSUSE Kernel - openSUSE Mailing Lists

[opensuse-kernel] kernel-default-base-2.6.29-5.2.x86_64 rpm errors
by Dave Plater 18 Jul '24

18 Jul '24

Hi, I'm busy updating to the latest factory kernel and have received the following errors from kernel-default-base installation (I did insert a blank dvd during the installation of the rpm by zypper):- WARNING: /lib/modules/2.6.29-rc8-5-default/kernel/drivers/scsi/sd_mod.ko needs unknown symbol crc_t10dif WARNING: /lib/modules/2.6.29-rc8-5-default/kernel/drivers/scsi/sr_mod.ko needs unknown symbol register_cdrom WARNING: /lib/modules/2.6.29-rc8-5-default/kernel/drivers/scsi/sr_mod.ko needs unknown symbol cdrom_ioctl WARNING: /lib/modules/2.6.29-rc8-5-default/kernel/drivers/scsi/sr_mod.ko needs unknown symbol cdrom_media_changed WARNING: /lib/modules/2.6.29-rc8-5-default/kernel/drivers/scsi/sr_mod.ko needs unknown symbol cdrom_get_media_event WARNING: /lib/modules/2.6.29-rc8-5-default/kernel/drivers/scsi/sr_mod.ko needs unknown symbol cdrom_release WARNING: /lib/modules/2.6.29-rc8-5-default/kernel/drivers/scsi/sr_mod.ko needs unknown symbol cdrom_open WARNING: /lib/modules/2.6.29-rc8-5-default/kernel/drivers/scsi/sr_mod.ko needs unknown symbol unregister_cdrom WARNING: /lib/modules/2.6.29-rc8-5-default/kernel/drivers/scsi/sr_mod.ko needs unknown symbol cdrom_number_of_slots And then these errors which I think IIRC happened before when the kernel was first split into three:- Kernel image: /boot/vmlinuz-2.6.29-rc8-5-default Initrd image: /boot/initrd-2.6.29-rc8-5-default Root device: /dev/disk/by-id/ata-WDC_WD800JB-00JJC0_WD-WMAM9RA78067-part3 (/dev/sda3) (mounted on / as xfs) Resume device: /dev/disk/by-id/ata-WDC_WD800JB-00JJC0_WD-WMAM9RA78067-part2 (/dev/sda2) FATAL: Module processor not found. WARNING: no dependencies for kernel module 'processor' found. FATAL: Module thermal not found. WARNING: no dependencies for kernel module 'thermal' found. FATAL: Module ata_generic not found. WARNING: no dependencies for kernel module 'ata_generic' found. FATAL: Module piix not found. WARNING: no dependencies for kernel module 'piix' found. FATAL: Module ide_pci_generic not found. WARNING: no dependencies for kernel module 'ide_pci_generic' found. FATAL: Module fan not found. WARNING: no dependencies for kernel module 'fan' found. FATAL: Module xfs not found. WARNING: no dependencies for kernel module 'xfs' found. FATAL: Module usbhid not found. WARNING: no dependencies for kernel module 'usbhid' found. Kernel Modules: scsi_mod libata ata_piix edd ahci sd_mod usbcore ohci-hcd ehci-hcd uhci-hcd WARNING: /dev/shm/mkinitramfs.0drQsZ/mnt/lib/modules/2.6.29-rc8-5-default/kernel/drivers/scsi/sd_mod.ko needs unknown symbol crc_t10dif Features: block usb resume.userspace resume.kernel Bootsplash: openSUSE (1280x1024) 22669 blocks Should I open a bug report about the errors which are possibly from inserting a dvd while the kernel rpm was installing? Regards Dave P -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-kernel+help(a)opensuse.org

2 2

[opensuse-kernel] How do I automate setting .config entries to "n"
by doiggl＠velocitynet.com.au 13 Oct '10

13 Oct '10

Hello, I get this abort message such as this example when compiling a package which involves a kernel. and the .config file. It always ends in 'aborted' at the end like this. "Texas Instruments ADS7871 A/D converter (SENSORS_ADS7871) [N/m/y/?] (NEW) aborted!" or "Compile Remote Controller keymap modules (RC_MAP) [M/n/?] (NEW) aborted!" It falls over on a diferrent line in the .config each time I submit a rebuild. This is a slow process doing one item at a time. Question. Is is possible to automatically set it so that (NEW) entries are set and stored in the .config like this CONFIG_{itemname}=n Thanks Glenn - So far its been a case of append the value to the .config eg CONFIG_RC_MAP=n - Then submit the build again, wait and encocounter the error on another .config entry. Here is a small list I struck so far. I added them in one at a time to the .config and submit another build. Its a slow process. CONFIG_CROSS_COMPILE="" CONFIG_COMPACTION=n CONFIG_ACPI_HED=n CONFIG_MFD_WM8994=n CONFIG_PCCARD_NONSTATIC=n CONFIG_ACPI_APEI=n CONFIG_INTEL_IDLE=n CONFIG_PCI_CNB20LE_QUIRK=n CONFIG_IP_MROUTE_MULTIPLE_TABLES=n CONFIG_NETFILTER_XT_TARGET_TEE=n CONFIG_NET_SCTPPROBE=n -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-kernel+help(a)opensuse.org

2 4

[opensuse-kernel] git bisecting help...
by Andreas Jaeger 30 Sep '10

30 Sep '10

ifolder3 does not work anymore with 2.6.36 kernels but worked fine with 2.6.34. I filed already this bug but it seems nobody knows how to tackle this: https://bugzilla.novell.com/show_bug.cgi?id=639470 So, I'd like to do some bisecting between 2.6.34 and 2.6.36 to figure out which commit broke this. What is the best way doing this? Trying bisection of Linus' tree or using our kernel git repository? Is there any good documentation that will guide me through this? Andreas -- Andreas Jaeger, Program Manager openSUSE, aj(a){novell.com,opensuse.org} Twitter: jaegerandi | Identica: jaegerandi SUSE LINUX Products GmbH, GF: Markus Rex, HRB 16746 (AG Nürnberg) Maxfeldstr. 5, 90409 Nürnberg, Germany GPG fingerprint = 93A3 365E CE47 B889 DF7F FED1 389A 563C C272 A126 -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-kernel+help(a)opensuse.org

5 5

[opensuse-kernel] CROSS_COMPILE parameter not recognised
by doiggl＠velocitynet.com.au 27 Sep '10

27 Sep '10

Hello. I get the following errors in [1]. I have set CONFIG_CROSS_COMPILE=n in the .config file. Its failing on line "Cross-compiler tool prefix (CROSS_COMPILE) [] (NEW) aborted!" What else am I missing here [i.e mis-spelt parameter]. Im not cross compiling anything. Thanks Glenn + make prepare -C /usr/src/packages/BUILD/kernel-vanilla-2.6.34.7/linux-2.6.35 O=/usr/src/packages/BUILD/kernel-vanilla-2.6.34.7/linux-obj make: Entering directory `/usr/src/packages/BUILD/kernel-vanilla-2.6.34.7/linux-2.6.35' HOSTCC scripts/basic/fixdep HOSTCC scripts/basic/docproc HOSTCC scripts/basic/hash GEN /usr/src/packages/BUILD/kernel-vanilla-2.6.34.7/linux-obj/Makefile HOSTCC scripts/kconfig/conf.o HOSTCC scripts/kconfig/kxgettext.o SHIPPED scripts/kconfig/zconf.tab.c SHIPPED scripts/kconfig/lex.zconf.c SHIPPED scripts/kconfig/zconf.hash.c HOSTCC scripts/kconfig/zconf.tab.o HOSTLD scripts/kconfig/conf scripts/kconfig/conf -s arch/x86/Kconfig .config:571:warning: symbol value 'm' invalid for PCCARD_NONSTATIC .config:2966:warning: symbol value 'm' invalid for MFD_WM8994 * * Restart config... * * * General setup * Prompt for development and/or incomplete code/drivers (EXPERIMENTAL) [Y/n/?] y Cross-compiler tool prefix (CROSS_COMPILE) [] (NEW) aborted! Console input/output is redirected. Run 'make oldconfig' to update configuration. make[3]: *** [silentoldconfig] Error 1 make[2]: *** [silentoldconfig] Error 2 make[1]: *** No rule to make target `include/config/auto.conf', needed by `include/config/kernel.release'. Stop. make: *** [sub-make] Error 2 make: Leaving directory `/usr/src/packages/BUILD/kernel-vanilla-2.6.34.7/linux-2.6.35' error: Bad exit status from /var/tmp/rpm-tmp.I8rPxE (%prep) [1] https://build.opensuse.org/package/rawlog?arch=x86_64&package=kernel-vanill… -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-kernel+help(a)opensuse.org

3 2

[opensuse-kernel] Current upstream kernel in OBS?
by Andreas Jaeger 21 Sep '10

21 Sep '10

I just found the Kernel:Vanilla repository that contains a 2.6.32 kernel. ;-( Could somebody clean this one up, please? Where do we track the upstream vanilla kernel? Is it possible for me to just download every day current git compiled as rpm and install it? Andreas -- Andreas Jaeger, Program Manager openSUSE, aj(a){novell.com,opensuse.org} Twitter: jaegerandi | Identica: jaegerandi SUSE LINUX Products GmbH, GF: Markus Rex, HRB 16746 (AG Nürnberg) Maxfeldstr. 5, 90409 Nürnberg, Germany GPG fingerprint = 93A3 365E CE47 B889 DF7F FED1 389A 563C C272 A126 -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-kernel+help(a)opensuse.org

3 6

[opensuse-kernel] Help need to boost samba perf
by Bruno Friedmann 21 Sep '10

21 Sep '10

Hi all, actually having a openSUSE 11.3 server installed, we face a strange trouble. Each samba transfer ( cifs, smbfs kde or gnome, or from xp/w2k3 ) doesn't goes more than 25MB/s If we start 2 transfer the 2 are running at 25MB/s max. Doing other network transfert (bacula, nfs, ftp) run all at the gigabit link limit of 125MB/s in read or write. (disks can run at ~350 Read write at the same times) I've exported the sysctl -a param here http://susepaste.org/90797401 I'm asking here first, as many posts and examples are talking about tpc window or other kernel trick. For samba : tests have been made using or not using socket option line. and that change throughput but only in range of -+4MB/s Any ideas ? -- Bruno Friedmann Ioda-Net Sàrl www.ioda-net.ch openSUSE Member User www.ioda.net/r/osu Blog www.ioda.net/r/blog fsfe fellowship www.fsfe.org tigerfoot on irc GPG KEY : D5C9B751C4653227 -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-kernel+help(a)opensuse.org

2 2

[opensuse-kernel] missing source code and consistency check error: please update supported.conf message
by doiggl＠velocitynet.com.au 21 Sep '10

21 Sep '10

Hello, How can the following error be fixed. It looks like two seperate errors. Its at least started the make process. The full log is at [1] spec is at [2] supported.conf is at [3] Thanks Glenn . . sound/usb/snd-usbmidi-lib + echo 'Consistency check error: please update supported.conf.' Consistency check error: please update supported.conf. + mkdir -p /usr/src/packages/BUILDROOT/kernel-vanilla-2.6.35.4-161.1.x86_64/usr/src/linux-2.6.35.4-161-obj/x86_64/vanilla + cp Module.symvers /usr/src/packages/BUILDROOT/kernel-vanilla-2.6.35.4-161.1.x86_64/usr/src/linux-2.6.35.4-161-obj/x86_64/vanilla + /usr/src/packages/SOURCES/modversions --pack . + '[' -s /usr/src/packages/BUILDROOT/kernel-vanilla-2.6.35.4-161.1.x86_64/boot/symtypes-2.6.35.4-161-vanilla ']' + rm -f /usr/src/packages/BUILDROOT/kernel-vanilla-2.6.35.4-161.1.x86_64/boot/symtypes-2.6.35.4-161-vanilla + '[' '!' -e /usr/src/packages/BUILDROOT/kernel-vanilla-2.6.35.4-161.1.x86_64/usr/src/linux-2.6.35.4-161-obj/x86_64 ']' + rm -f /usr/src/packages/BUILDROOT/kernel-vanilla-2.6.35.4-161.1.x86_64/lib/modules/2.6.35.4-161-vanilla/source /usr/src/packages/BUILDROOT/kernel-vanilla-2.6.35.4-161.1.x86_64/lib/modules/2.6.35.4-161-vanilla/build + ln -s /usr/src/linux-2.6.35.4-161 /usr/src/packages/BUILDROOT/kernel-vanilla-2.6.35.4-161.1.x86_64/lib/modules/2.6.35.4-161-vanilla/source ln: creating symbolic link `/usr/src/packages/BUILDROOT/kernel-vanilla-2.6.35.4-161.1.x86_64/lib/modules/2.6.35.4-161-vanilla/source': No such file or directory error: Bad exit status from /var/tmp/rpm-tmp.fXWT2m (%install) [1] https://build.opensuse.org/package/live_build_log?arch=x86_64&package=reise… [2] https://build.opensuse.org/package/view_file?file=reiser4.spec&package=reis… [3] https://build.opensuse.org/package/view_file?file=supported.conf&package=re… -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-kernel+help(a)opensuse.org

1 0

[opensuse-kernel] kernel exploit
by Bruno Friedmann 21 Sep '10

21 Sep '10

Actually this works great on 11.3 64bits version http://sota.gen.nz/compat2/ As we already have the -7 in the pipe for the usb things, I'm pretty sure we will get this corrected too. -- Bruno Friedmann bruno(a)ioda-net.ch Ioda-Net Sàrl www.ioda-net.ch openSUSE Member User www.ioda.net/r/osu Blog www.ioda.net/r/blog fsfe fellowship www.fsfe.org tigerfoot on irc GPG KEY : D5C9B751C4653227 -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-kernel+help(a)opensuse.org

3 3

[opensuse-kernel] Question about Apparmor kernel code
by Jiri Malak 20 Sep '10

20 Sep '10

Hi All, I would like to fix Bug 551799 - Dosemu doesn't start except from root account which is caused by Apparmor code in kernel. It is unclear for me how Apparmor kernel code for openSUSE 11.3 is maintained. Please, can you anybody give me a hint. Regards Jiri -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-kernel+help(a)opensuse.org

5 6

[opensuse-kernel] [Kernel:HEAD] slub.c compilation issues
by Michael Woski 20 Sep '10

20 Sep '10

Hi, I've just downloaded the 2.6.36-rc4 sources and wanted to build my own kernel, but I went into some compilation trouble. /usr/src/linux-2.6.36-rc4-18/mm/slub.c: In function ‘__slab_alloc’: /usr/src/linux-2.6.36-rc4-18/mm/slub.c:1690:2: error: implicit declaration of function ‘PageSlubDebug’ /usr/src/linux-2.6.36-rc4-18/mm/slub.c:1689:1: warning: label ‘slow_path’ defined but not used /usr/src/linux-2.6.36-rc4-18/mm/slub.c:1643:3: error: label ‘debug’ used but not defined Attached is my config. bye Mich;

3 3

[opensuse-kernel] please push cgroup-disable-memory.patch upstream or drop it
by Stefan Seyfried 20 Sep '10

20 Sep '10

Hi, after searching for hours why my memory subsystem was disabled and how to enable it - reading almost all of the cgroups kernel code, of course the upstream kernel code, I found that SUSE has a patch to disable it by default. This is "Patch-mainline: not yet" since 2½ years, and I guess it should either be pushed again or dropped - especially since it is trivially replaced by "cgroups_disable=memory" on the kernel command line. And that's a place where people would actually find how to enable it again ;-) Thanks, Stefan -- Stefan Seyfried "Any ideas, John?" "Well, surrounding them's out." -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-kernel+help(a)opensuse.org

3 4

Re: [opensuse-kernel] please push cgroup-disable-memory.patch upstream or drop it
by Stefan Seyfried 20 Sep '10

20 Sep '10

On Mon, 20 Sep 2010 15:08:17 +0200 Stefan Seyfried <stefan.seyfried(a)googlemail.com> wrote: > On Mon, 20 Sep 2010 13:34:32 +0200 > Jiri Benc <jbenc(a)suse.cz> wrote: > > > On Sun, 19 Sep 2010 16:32:33 +0200, Stefan Seyfried wrote: > > > after searching for hours why my memory subsystem was disabled and how to > > > enable it - reading almost all of the cgroups kernel code, of course the > > > upstream kernel code, I found that SUSE has a patch to disable it by > > > default. > > > > In which branch? > > I have no idea. The patch in question is in OBS > Kernel:HEAD/kernel-source/patches.suse/cgroup-disable-memory.patch sorry, forgot to CC the list... -- Stefan Seyfried "Any ideas, John?" "Well, surrounding them's out." -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-kernel+help(a)opensuse.org

1 0

[opensuse-kernel] Question about Apparmor kernel patch
by Jiri Malak 19 Sep '10

19 Sep '10

Hi All, I would like to fix bug in Apparmor for openSUSE 11.3. It is unclear for me how Apparmor kernel code for openSUSE 11.3 is maintained. Please, can you anybody give me a hint. Regards Jiri -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-kernel+help(a)opensuse.org

1 0

[opensuse-kernel] Renaming config-options.changes.txt?
by Takashi Iwai 17 Sep '10

17 Sep '10

Hi, the recently added file in kernel-source, config-options.changes.txt, is ignored by default by osc because it matches with the default exclude_glob pattern. I had to reset exclude_glob manually in ~/.oscrc to add it in my private build kernel on OBS. Can we rename it to be more buildservice-friendly? thanks, Takashi -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-kernel+help(a)opensuse.org

4 5

[opensuse-kernel] 2.6.34.7 - update for openSUSE 11.3?
by Andreas Jaeger 16 Sep '10

16 Sep '10

Hi, reading http://lwn.net/Articles/404712/ about 2.6.34.7, I suggest we release asap a new 2.6.34.7 update kernel for openSUSE 11.3. What are your plans? Andreas -- Andreas Jaeger, Program Manager openSUSE, aj(a){novell.com,opensuse.org} Twitter: jaegerandi | Identica: jaegerandi SUSE LINUX Products GmbH, GF: Markus Rex, HRB 16746 (AG Nürnberg) Maxfeldstr. 5, 90409 Nürnberg, Germany GPG fingerprint = 93A3 365E CE47 B889 DF7F FED1 389A 563C C272 A126 -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-kernel+help(a)opensuse.org

4 6

[opensuse-kernel] Has anyone successfully compiled in opensuse build service the Linux kernel version 2.6.35.x
by doiggl＠velocitynet.com.au 14 Sep '10

14 Sep '10

Hello, Has anyone successfully compiled in opensuse build service the Linux kernel version 2.6.35.x , or do you know of anyone who has done so ? Have you a link to that project ?. If there is none could I use this .spec file [1] and alter the lines{see below} and do you think that would compile ? from %define srcversion 2.6.34 %define patchversion 2.6.34 %define variant %{nil} to %define srcversion 2.6.35.4 %define patchversion 2.6.35.4 %define variant %{nil} Thanks Glenn Spec file[1]-> https://build.opensuse.org/package/view_file?file=kernel-vanilla.spec&packa… -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-kernel+help(a)opensuse.org

2 1

[opensuse-kernel] prompt for items then aborts on anything NEW it find during make, how do I finish kernel compile.
by doiggl＠velocitynet.com.au 12 Sep '10

12 Sep '10

Hello, This is the last part of a build log how do I finish kernel compile It seems to prompt for items then aborts on anything NEW it finds, an example as follows. Full log , see [1] Spec file , see [2] Project , see [3] How the settings were made [4] Attached files to project {config.addon.tar.bz2,config.addon.tar.bz2} Advice on how to fix this error is appreciated. Thanks Glenn + cd linux-2.6.34 + /usr/src/packages/SOURCES/apply-patches --vanilla /usr/src/packages/SOURCES/series.conf .. + patch -s -F0 -E -p1 --no-backup-if-mismatch -i ../patches.rpmify/reiser4-for-2.6.34.patch + cd /usr/src/packages/BUILD/reiser4-2.6.34.4/linux-obj + '[' -f /usr/src/packages/SOURCES/localversion ']' + test -e ../config.addon/x86_64/vanilla + /usr/src/packages/SOURCES/configtool.pl ../config/x86_64/vanilla ../config.addon/x86_64/vanilla + /usr/src/packages/BUILD/reiser4-2.6.34.4/linux-2.6.34/scripts/config --set-str CONFIG_LOCALVERSION -11-vanilla --enable CONFIG_SUSE_KERNEL --disable CONFIG_DEBUG_INFO + MAKE_ARGS=' -C /usr/src/packages/BUILD/reiser4-2.6.34.4/linux-2.6.34 O=/usr/src/packages/BUILD/reiser4-2.6.34.4/linux-obj' + test -e /usr/src/packages/SOURCES/TOLERATE-UNKNOWN-NEW-CONFIG-OPTIONS + cp .config .config.orig + make silentoldconfig -C /usr/src/packages/BUILD/reiser4-2.6.34.4/linux-2.6.34 O=/usr/src/packages/BUILD/reiser4-2.6.34.4/linux-obj make: Entering directory `/usr/src/packages/BUILD/reiser4-2.6.34.4/linux-2.6.34' HOSTCC scripts/basic/fixdep HOSTCC scripts/basic/docproc HOSTCC scripts/basic/hash GEN /usr/src/packages/BUILD/reiser4-2.6.34.4/linux-obj/Makefile HOSTCC scripts/kconfig/conf.o HOSTCC scripts/kconfig/kxgettext.o SHIPPED scripts/kconfig/zconf.tab.c SHIPPED scripts/kconfig/lex.zconf.c SHIPPED scripts/kconfig/zconf.hash.c HOSTCC scripts/kconfig/zconf.tab.o HOSTLD scripts/kconfig/conf scripts/kconfig/conf -s arch/x86/Kconfig * * Restart config... * * * File systems * Second extended fs support (EXT2_FS) [Y/n/m/?] y Ext2 extended attributes (EXT2_FS_XATTR) [Y/n/?] y Ext2 POSIX Access Control Lists (EXT2_FS_POSIX_ACL) [Y/n/?] y Ext2 Security Labels (EXT2_FS_SECURITY) [Y/n/?] y Ext2 execute in place support (EXT2_FS_XIP) [N/y/?] n Ext3 journalling file system support (EXT3_FS) [Y/n/m/?] y Default to 'data=ordered' in ext3 (EXT3_DEFAULTS_TO_ORDERED) [Y/n/?] y Ext3 extended attributes (EXT3_FS_XATTR) [Y/n/?] y Ext3 POSIX Access Control Lists (EXT3_FS_POSIX_ACL) [Y/n/?] y Ext3 Security Labels (EXT3_FS_SECURITY) [Y/n/?] y The Extended 4 (ext4) filesystem (EXT4_FS) [M/n/y/?] m Ext4 extended attributes (EXT4_FS_XATTR) [Y/n/?] y Ext4 POSIX Access Control Lists (EXT4_FS_POSIX_ACL) [Y/n/?] y Ext4 Security Labels (EXT4_FS_SECURITY) [Y/n/?] y EXT4 debugging support (EXT4_DEBUG) [N/y/?] n JBD (ext3) debugging support (JBD_DEBUG) [N/y/?] n JBD2 (ext4) debugging support (JBD2_DEBUG) [N/y/?] n Reiser4 (EXPERIMENTAL) (REISER4_FS) [N/m/y/?] (NEW) aborted! Console input/output is redirected. Run 'make oldconfig' to update configuration. make[2]: *** [silentoldconfig] Error 1 make[1]: *** [silentoldconfig] Error 2 make: *** [sub-make] Error 2 make: Leaving directory `/usr/src/packages/BUILD/reiser4-2.6.34.4/linux-2.6.34' error: Bad exit status from /var/tmp/rpm-tmp.VumF7X (%prep) RPM build errors: Bad exit status from /var/tmp/rpm-tmp.VumF7X (%prep) SysRq : Power Off Power down. [1] Full log -> https://build.opensuse.org/package/live_build_log?arch=x86_64&package=reise… [2] Spec file -> https://build.opensuse.org/package/view_file?file=reiser4.spec&package=reis… [3] Project -> https://build.opensuse.org/package/show?package=reiser4&project=home%3Adoig… [4] How the settings were made # Step 1. ######################################################## # Reiser4fs Patches -series.conf ######################################################## patches.rpmify/reiser4-for-2.6.34.patch ######### # Step 2. ######### #create config.addon.tar.bz2 cd / mkdir config.addon mkdir config.addon/i586/ mkdir config.addon/x86_64/ echo CONFIG_REISER4=m > config.addon/x86_64/vanilla echo CONFIG_REISER4=m > config.addon/i586/vanilla rm -v config.addon.tar config.addon.tar.bz2 tar -cvf config.addon.tar config.addon bzip2 -v config.addon.tar ######### # Step 3. ######### # create patches.rpmify.tar.bz2 cd / md patches.rpmify cd patches.rpmify wget -c http://www.kernel.org/pub/linux/kernel/people/edward/reiser4/reiser4-for-2.… gunzip -v reiser4-for-2.6.34.patch.gz cd / tar -cvf patches.rpmify.tar patches.rpmify > patches.rpmify/ > patches.rpmify/reiser4-for-2.6.34.patch # bzip2 -v patches.rpmify.tar > patches.rpmify.tar: 5.308:1, 1.507 bits/byte, 81.16% saved, 2396160 in, 451425 out. -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-kernel+help(a)opensuse.org

1 0

[opensuse-kernel] What directory must I change to, before running 'make oldconfig' in obs.
by doiggl＠velocitynet.com.au 11 Sep '10

11 Sep '10

Hello, What directory must I change directory to, before running 'make oldconfig' in obs. Would it be cd %src_install_dir/src/usr/linux Thanks Glenn [Error message I get] + /usr/bin/make oldconfig make: *** No rule to make target `oldconfig'. Stop. error: Bad exit status from /var/tmp/rpm-tmp.CRwRIi (%prep) [spec file] -> https://build.opensuse.org/package/view_file?file=kernel-vanilla.spec&packa… [last log file] -> https://build.opensuse.org/package/live_build_log?arch=x86_64&package=kerne… -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-kernel+help(a)opensuse.org

2 1

[opensuse-kernel] =?UTF-8?Q?Hello,
by doiggl＠velocitynet.com.au 09 Sep '10

09 Sep '10

What_directory_do_I_need_to_be_in_before_I_run_the_'make=E2=80=82oldconfig'_command?= Message-ID: <68f120e5ee73cd2dc919729acacc4060(a)mail.velocitynet.com.au> X-Sender: doiggl(a)velocitynet.com.au User-Agent: RoundCube Webmail/0.3.1 Content-Transfer-Encoding: 8bit Content-Type: text/plain; charset=UTF-8 Hello, With obs what directory do I need to be in, before I run the 'make oldconfig' command to get around the following error. [from log] + /usr/bin/make oldconfig make: *** No rule to make target `oldconfig'. Stop. error: Bad exit status from /var/tmp/rpm-tmp.CRwRIi (%prep) Spec file is at [1] The full log is at [2] Thanks Glenn Spec file [1]->https://build.opensuse.org/package/view_file?file=kernel-vanilla.spec&packa… Full Log [2]->https://build.opensuse.org/package/live_build_log?arch=x86_64&package=kerne… -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-kernel+help(a)opensuse.org

1 0

[opensuse-kernel] %changelog not in descending chronological order - [Kernel:HEAD/openSUSE_11.3]
by doiggl＠velocitynet.com.au 09 Sep '10

09 Sep '10

Hello, I see many failures listed at [1] Example from this log [2] I see the message ----------------------------------------------------------------- ----- building kernel-source.spec (user abuild) ----------------------------------------------------------------- ----------------------------------------------------------------- + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --define 'disturl obs://build.opensuse.org/Kernel:HEAD/openSUSE_11.3/254ef1b6295a7420c56ce8ee…' --eval %suse_insert_debug_package /usr/src/packages/SOURCES/kernel-source.spec error: %changelog not in descending chronological order [1] https://build.opensuse.org/project/monitor?project=Kernel%3AHEAD [2] https://build.opensuse.org/package/live_build_log?arch=x86_64&package=kerne… Fyi Glenn -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-kernel+help(a)opensuse.org

4 7

[opensuse-kernel] How in obs can 'make oldconfig' be run in obs ?
by doiggl＠velocitynet.com.au 08 Sep '10

08 Sep '10

Hello, As suggested by the message [1] when I run the command 'make oldconfig' in obs it generates the message as follows: + test -e /usr/src/packages/SOURCES/TOLERATE-UNKNOWN-NEW-CONFIG-OPTIONS + $'/usr/bin/make\342\200\202oldconfig' /var/tmp/rpm-tmp.Kg8iar: line 164: /usr/bin/make oldconfig: No such file or directory error: Bad exit status from /var/tmp/rpm-tmp.Kg8iar (%prep) RPM build errors: Bad exit status from /var/tmp/rpm-tmp.Kg8iar (%prep) SysRq : Power Off Power down. Question How in obs can 'make oldconfig' be run in obs? The full spec is listed at [2] Thanks Glenn [1] + make silentoldconfig -C /usr/src/packages/BUILD/kernel-vanilla-2.6.36/linux-2.6.35.4 O=/usr/src/packages/BUILD/kernel-vanilla-2.6.36/linux-obj make: Entering directory `/usr/src/packages/BUILD/kernel-vanilla-2.6.36/linux-2.6.35.4' HOSTCC scripts/basic/fixdep HOSTCC scripts/basic/docproc HOSTCC scripts/basic/hash GEN /usr/src/packages/BUILD/kernel-vanilla-2.6.36/linux-obj/Makefile HOSTCC scripts/kconfig/conf.o HOSTCC scripts/kconfig/kxgettext.o SHIPPED scripts/kconfig/zconf.tab.c SHIPPED scripts/kconfig/lex.zconf.c SHIPPED scripts/kconfig/zconf.hash.c HOSTCC scripts/kconfig/zconf.tab.o HOSTLD scripts/kconfig/conf scripts/kconfig/conf -s arch/x86/Kconfig * * Restart config... * * * Keyboards * Keyboards (INPUT_KEYBOARD) [Y/?] y Keypad Support for ADP5520 PMIC (KEYBOARD_ADP5520) [M/n/y/?] m ADP5588/87 I2C QWERTY Keypad and IO Expander (KEYBOARD_ADP5588) [M/n/y/?] m Atmel AT42QT2160 Touch Sensor Chip (KEYBOARD_QT2160) [N/m/y/?] (NEW) aborted! Console input/output is redirected. Run 'make oldconfig' to update configuration. make[2]: *** [silentoldconfig] Error 1 make[1]: *** [silentoldconfig] Error 2 make: *** [sub-make] Error 2 make: Leaving directory `/usr/src/packages/BUILD/kernel-vanilla-2.6.36/linux-2.6.35.4' error: Bad exit status from /var/tmp/rpm-tmp.g9zsTC (%prep) RPM build errors: Bad exit status from /var/tmp/rpm-tmp.g9zsTC (%prep) SysRq : Power Off Power down. [2] Full .spec file -> https://build.opensuse.org/package/view_file?file=kernel-vanilla.spec&packa… [part listing] The first line was added in /usr/bin/make oldconfig make silentoldconfig $MAKE_ARGS < /dev/null -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-kernel+help(a)opensuse.org

2 2

[opensuse-kernel] compilation config help needed
by doiggl＠velocitynet.com.au 06 Sep '10

06 Sep '10

Hello, How can the configuration or .spec file be fixed to solve these errors [1] Im using the 2.6.35.4 kernel. Project and log details at [2][3]. Seems to be prompting for various items. Thanks for your help Glenn a). Im applying a patch , looks like it applied ok. + /usr/src/packages/SOURCES/apply-patches --vanilla /usr/src/packages/SOURCES/series.conf .. + patch -s -F0 -E -p1 --no-backup-if-mismatch -i ../patches.rpmify/reiser4-for-2.6.35.patch b). Added CONFIG_REISER4=m to config.addon/x86_64/vanilla, tar it up into config.addon.tar.bz2 Constructed as follows: # cd / # md config.addon # md config.addon/x86_64/ # echo CONFIG_REISER4=m > config.addon/x86_64/vanilla # tar -cvf config.addon.tar config.addon config.addon/ config.addon/x86_64/ config.addon/x86_64/vanilla # bzip2 -v config.addon.tar config.addon.tar: 43.207:1, 0.185 bits/byte, 97.69% saved, 10240 in, 237 out. [1] last part of log + sort -u + cd linux-2.6.35.4 + /usr/src/packages/SOURCES/apply-patches --vanilla /usr/src/packages/SOURCES/series.conf .. + patch -s -F0 -E -p1 --no-backup-if-mismatch -i ../patches.rpmify/reiser4-for-2.6.35.patch + cd /usr/src/packages/BUILD/kernel-vanilla-2.6.36/linux-obj + '[' -f /usr/src/packages/SOURCES/localversion ']' + test -e ../config.addon/x86_64/vanilla + /usr/src/packages/SOURCES/configtool.pl ../config/x86_64/vanilla ../config.addon/x86_64/vanilla + /usr/src/packages/BUILD/kernel-vanilla-2.6.36/linux-2.6.35.4/scripts/config --set-str CONFIG_LOCALVERSION -10-vanilla --enable CONFIG_SUSE_KERNEL --disable CONFIG_DEBUG_INFO + MAKE_ARGS=' -C /usr/src/packages/BUILD/kernel-vanilla-2.6.36/linux-2.6.35.4 O=/usr/src/packages/BUILD/kernel-vanilla-2.6.36/linux-obj' + test -e /usr/src/packages/SOURCES/TOLERATE-UNKNOWN-NEW-CONFIG-OPTIONS + echo '##list content of /./usr/src/packages/BUILD/kernel-vanilla-2.6.36/config.addon/x86_64/vanilla - added in ###' ##list content of /./usr/src/packages/BUILD/kernel-vanilla-2.6.36/config.addon/x86_64/vanilla - added in ### + cat /./usr/src/packages/BUILD/kernel-vanilla-2.6.36/config.addon/x86_64/vanilla CONFIG_REISER4=m + make silentoldconfig -C /usr/src/packages/BUILD/kernel-vanilla-2.6.36/linux-2.6.35.4 O=/usr/src/packages/BUILD/kernel-vanilla-2.6.36/linux-obj make: Entering directory `/usr/src/packages/BUILD/kernel-vanilla-2.6.36/linux-2.6.35.4' HOSTCC scripts/basic/fixdep HOSTCC scripts/basic/docproc HOSTCC scripts/basic/hash GEN /usr/src/packages/BUILD/kernel-vanilla-2.6.36/linux-obj/Makefile HOSTCC scripts/kconfig/conf.o HOSTCC scripts/kconfig/kxgettext.o SHIPPED scripts/kconfig/zconf.tab.c SHIPPED scripts/kconfig/lex.zconf.c SHIPPED scripts/kconfig/zconf.hash.c HOSTCC scripts/kconfig/zconf.tab.o HOSTLD scripts/kconfig/conf scripts/kconfig/conf -s arch/x86/Kconfig .config:4379:warning: symbol value 'm' invalid for VIDEO_TM6000_DVB * * Restart config... * * * General setup * Prompt for development and/or incomplete code/drivers (EXPERIMENTAL) [Y/n/?] y Cross-compiler tool prefix (CROSS_COMPILE) [] Local version - append to kernel release (LOCALVERSION) [-10-vanilla] -10-vanilla Automatically append version information to the version string (LOCALVERSION_AUTO) [N/y/?] n Kernel compression mode > 1. Gzip (KERNEL_GZIP) 2. Bzip2 (KERNEL_BZIP2) 3. LZMA (KERNEL_LZMA) 4. LZO (KERNEL_LZO) choice[1-4?]: 1 Support for paging of anonymous memory (swap) (SWAP) [Y/n/?] y System V IPC (SYSVIPC) [Y/n/?] y POSIX Message Queues (POSIX_MQUEUE) [Y/n/?] y BSD Process Accounting (BSD_PROCESS_ACCT) [Y/n/?] y BSD Process Accounting version 3 file format (BSD_PROCESS_ACCT_V3) [Y/n/?] y Export task/process statistics through netlink (EXPERIMENTAL) (TASKSTATS) [Y/n/?] y Enable per-task delay accounting (EXPERIMENTAL) (TASK_DELAY_ACCT) [Y/n/?] y Enable extended accounting over taskstats (EXPERIMENTAL) (TASK_XACCT) [Y/n/?] y Enable per-task storage I/O accounting (EXPERIMENTAL) (TASK_IO_ACCOUNTING) [Y/n/?] y Auditing support (AUDIT) [Y/n/?] y Enable system-call auditing support (AUDITSYSCALL) [Y/n/?] y Kernel .config support (IKCONFIG) [Y/n/m/?] y Enable access to .config through /proc/config.gz (IKCONFIG_PROC) [Y/n/?] y Kernel log buffer size (16 => 64KB, 17 => 128KB) (LOG_BUF_SHIFT) [18] 18 enable deprecated sysfs features to support old userspace tools (SYSFS_DEPRECATED_V2) [N/y/?] n Kernel->user space relay support (formerly relayfs) (RELAY) [Y/?] y Namespaces support (NAMESPACES) [Y/?] y UTS namespace (UTS_NS) [Y/n/?] y IPC namespace (IPC_NS) [Y/n/?] y User namespace (EXPERIMENTAL) (USER_NS) [Y/n/?] y PID Namespaces (EXPERIMENTAL) (PID_NS) [Y/n/?] y Network namespace (NET_NS) [Y/n/?] y Initial RAM filesystem and RAM disk (initramfs/initrd) support (BLK_DEV_INITRD) [Y/n/?] y Initramfs source file(s) (INITRAMFS_SOURCE) [] Optimize for size (CC_OPTIMIZE_FOR_SIZE) [N/y/?] n Disable heap randomization (COMPAT_BRK) [Y/n/?] y Choose SLAB allocator > 1. SLAB (SLAB) 2. SLUB (Unqueued Allocator) (SLUB) choice[1-2?]: 1 Profiling support (PROFILING) [Y/n/?] y OProfile system profiling (OPROFILE) [M/n/y/?] m OProfile multiplexing support (EXPERIMENTAL) (OPROFILE_EVENT_MULTIPLEX) [N/y/?] n Kprobes (KPROBES) [Y/n/?] y Slow work debugging through debugfs (SLOW_WORK_DEBUG) [N/y/?] (NEW) aborted! Console input/output is redirected. Run 'make oldconfig' to update configuration. make[2]: *** [silentoldconfig] Error 1 make[1]: *** [silentoldconfig] Error 2 make: *** [sub-make] Error 2 make: Leaving directory `/usr/src/packages/BUILD/kernel-vanilla-2.6.36/linux-2.6.35.4' error: Bad exit status from /var/tmp/rpm-tmp.tdOUaD (%prep) RPM build errors: Bad exit status from /var/tmp/rpm-tmp.tdOUaD (%prep) SysRq : Power Off Power down. ===================== ===================== [2] project -> https://build.opensuse.org/package/show?package=kernel-vanilla&project=home… [3] last log ->https://build.opensuse.org/package/live_build_log?arch=x86_64&package=kerne… -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-kernel+help(a)opensuse.org

2 2

[opensuse-kernel] How to fix error: Kernel release mismatch: 2.6.35-12-default != 2.6.35.4-21-desktop
by doiggl＠velocitynet.com.au 04 Sep '10

04 Sep '10

Hello, How can this error message be fixed [3] The spec file is at [1] The full log is at [2] [1] https://build.opensuse.org/package/view_file?file=reiser4.spec&package=reis… [2] https://build.opensuse.org/package/live_build_log?arch=x86_64&package=reise… [3] [part of log with error] make: Entering directory `/usr/src/packages/BUILD/reiser4-2.6.35.4/linux-2.6.35' HOSTCC scripts/genksyms/genksyms.o SHIPPED scripts/genksyms/lex.c SHIPPED scripts/genksyms/parse.h SHIPPED scripts/genksyms/keywords.c HOSTCC scripts/genksyms/lex.o SHIPPED scripts/genksyms/parse.c HOSTCC scripts/genksyms/parse.o HOSTLD scripts/genksyms/genksyms CC scripts/mod/empty.o HOSTCC scripts/mod/mk_elfconfig MKELF scripts/mod/elfconfig.h HOSTCC scripts/mod/file2alias.o HOSTCC scripts/mod/modpost.o HOSTCC scripts/mod/sumversion.o HOSTLD scripts/mod/modpost HOSTCC scripts/selinux/genheaders/genheaders HOSTCC scripts/selinux/mdp/mdp HOSTCC scripts/kallsyms HOSTCC scripts/conmakehash HOSTCC scripts/bin2c make: Leaving directory `/usr/src/packages/BUILD/reiser4-2.6.35.4/linux-2.6.35' ++ make -s kernelrelease -C /usr/src/packages/BUILD/reiser4-2.6.35.4/linux-2.6.35 O=/usr/src/packages/BUILD/reiser4-2.6.35.4/linux-obj + krel=2.6.35-12-default + '[' 2.6.35-12-default '!=' 2.6.35.4-21-desktop ']' + echo 'Kernel release mismatch: 2.6.35-12-default != 2.6.35.4-21-desktop' Kernel release mismatch: 2.6.35-12-default != 2.6.35.4-21-desktop + exit 1 error: Bad exit status from /var/tmp/rpm-tmp.pIni24 (%prep) -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-kernel+help(a)opensuse.org

1 0

[opensuse-kernel] 2.6.36-rc3-9-desktop and ioctl
by Stephen Shaw 03 Sep '10

03 Sep '10

When trying to build the nvidia drivers and virtualbox drivers I'm getting an error about on unknown field 'ioctl' specified in initializer. Is this a regression, or does everyone just need to catch up with this kernel? Thanks, Stephen -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-kernel+help(a)opensuse.org

3 3