October 2006 - openSUSE Autoinstall - openSUSE Mailing Lists

linuxrc - netdevice=<hwaddress>
by John Willis 18 Dec '12

18 Dec '12

Does anyone know if any of the SLES releases 9 or 10 support passing the linuxrc option netdevice=<hardware mac address> ? I noticed Red Hat has had this for sometime and it seems totally missing in SuSE which seems really odd. I'm still scratching my head if we really are still passing only by kernel interface name. I read in the change log for linuxrc-1.8.6-3 a change that "sounds" like this feature. * Mon Mar 14 2005 - snwint(a)suse.de - s390: fix segfault in net_list_s390_devs() - extra root image was sometimes not used - allow netdevices to be specified by hwaddress But it looks like linuxrc-1.8.6-3 is only available in SuSE Professional 9.3. "any" commentary would be sincerely appreciated the feature also seems to be fairly minor since any delimiter seperating the octets in the hwaddr string could be used to identify the difference between an interface name and interface hw address if i could figure out a generic method of overriding the linuxrc with a custom script and daisy chain it back into linuxrc after setting up the interface name, I would.. and have a slight idea on how to do that.. but i'd rather find out i'm just missing something and the feature is already there Thanks!

3 2

RE: [suse-autoinstall] SLES 10 RC2 remove-packages section?
by Matt Gillard 05 Mar '08

05 Mar '08

I dont have kinternet installed. This is what doesnt seem to work: <software> <patterns config:type="list"> <pattern>default</pattern> <pattern>Basis-Devel</pattern> <pattern>x11</pattern> </patterns> <packages config:type="list"> <packages>perl-libwww-perl</packages> <packages>net-snmp</packages> <packages>kernel-source</packages> </packages> <remove-packages config:type="list"> <packages>pptp</packages> <packages>smpppd</packages> <packages>ppp</packages> <packages>wvdial</packages> <packages>mutt</packages> </remove-packages> </software> In y2log it mentions that those packages should be removed, but it goes ahead and installs them anyway. I can do it manually on the command line: # rpm -e pptp smpppd ppp wvdial mutt and that works fine so I know I have no dependency problems. matt > -----Original Message----- > From: Uwe Gansert [mailto:ug@suse.de] > Sent: Friday, 30 June 2006 12:50 AM > To: suse-autoinstall(a)suse.com > Subject: Re: [suse-autoinstall] SLES 10 RC2 remove-packages section? > > > On Thursday 29 June 2006 16:45, Manfred Hollstein wrote: > > > If that fails, you have kinternet installed; add that to > the list and it > > should work. > > good point. > <remove-packages> can not break dependencies and so it's very > likely that > there is still a package that needs those packages. > I did a very small installation with no X - so it worked for me. > > -- > ciao, Uwe Gansert > > Uwe Gansert, Server Technologies Team > SUSE LINUX Products GmbH, Maxfeldstrasse 5, D-90409 Nuernberg, Germany > Fax: +49-(0)911-74053-476, Web: http://www.suse.de/~ug > now playing Covenant - Wasteland > > -- > To unsubscribe, e-mail: suse-autoinstall-unsubscribe(a)suse.com > For additional commands, e-mail: suse-autoinstall-help(a)suse.com > > This email and any attachments may contain privileged and confidential information and are intended for the named addressee only. If you have received this e-mail in error, please notify the sender and delete this e-mail immediately. Any confidentiality, privilege or copyright is not waived or lost because this e-mail has been sent to you in error. It is your responsibility to check this e-mail and any attachments for viruses. No warranty is made that this material is free from computer virus or any other defect or error. Any loss/damage incurred by using this material is not the sender's responsibility. The sender's entire liability will be limited to resupplying the material.

4 6

Scripting dirinstall?
by Teun 25 Feb '07

25 Feb '07

Does anyone know if it is possible to use the 'dirinstall' from the command line? For instance i would like to be able to do something like: # yast dirinstall -d /someroot -s mypackages.sel If i do yast -h it says: "Usage: /sbin/yast [OPTIONS] [MODULE] [module specific parameters]" But is there a way to find out what 'module specific parameters' are available for a specific module? Thanks, Teun

3 2

changing init script launch sequence & getting location data
by Rich 08 Nov '06

08 Nov '06

hi. is it possible to easily change init script ('autoyast') launch sequence/requirements so that it is launched after sshd has started ? currently, it runs together with sshd, which is generating keys for some time, and that is inconvenient for some actions script has to perform. additionally, is it possible to get init script location data (defined in <location>) in the script itself some way (a variable ?) ? as in "use here the same host/directory you came from". (oh yes, using sles10) thanks -- Rich

2 3

Interactiv post-install script
by Bernhard Dübi 03 Nov '06

03 Nov '06

Hi everybody, some time ago I started creating my own sles9 cds. I have a sles9 where the install server runs and a sles9 machine where patch server runs. On the install server I use CD Creator to create my cds (at least the install tree, the iso images and the burning I do with a script). I also have some XML files for autoyast, with a post-install script where the user can choose some install options. All this works fine. Now I want to do the same with sles10. I managed to setup an install server on the sles9 machine. I also created some XML files for autoyast, but I have problems with the interactiv post-install script. Now some questions: 1) Can I use CD Creator from sles9 to create sles10 cds (just the install tree) ? 2) Can I use sles9 as patch server for sles10 ? 3) What's the best way to create an interactiv postinstall script ? I tried the init-script option, but the script runs in parallel with other scripts an never gets the hold of the console. In sles9 I had a post-install script which dropped a S00setup file in rc5.d, but in sles10 this files is ignored. Any ideas ? Thank you very much for your help. Sincerely Bernhard

3 4

JFYI: openSUSE 10.2 Beta1 (i386/x86-64) ready
by Uwe Gansert 26 Oct '06

26 Oct '06

Hi, With this eMail I want to encourage you to take part of the beta test of openSUSE 10.2. Especially for you, as administrator of an autoinstallation environment, it's important to find problems and bugs during the beta phase. As soon as the 10.2 is gold, we can't do any fixes anymore for autoyast because that requires a patch for the installation system which is on the CD/DVD. So official online updates for autoyast are hardly an option then. To make changes in autoyast a little bit more visible for you I've started a brief overview of what has changed in autoyast since 10.1 The current state of what has changed can be found here: http://www.suse.de/~ug/autoyast_changes_10_1-10_2.html You can download ISOs from: http://ftp.opensuse.org/pub/opensuse/distribution/openSUSE-10.2-Beta1/ If you think you've hit a bug you can either write a mail to this list or (even better) you can use bugzilla to report a bug: https://bugzilla.novell.com Thanks in advance for testing openSUSE 10.2 -- ciao, Uwe Gansert Uwe Gansert, Server Technologies Team SUSE LINUX Products GmbH, Maxfeldstrasse 5, D-90409 Nuernberg, Germany Business: http://www.suse.de/~ug now playing Psyche - 15 Minutes (Lights Out)

1 0

SLES10 with SLES10 SDK add on timeout
by Jason Record 26 Oct '06

26 Oct '06

I have integrated the SLES10 SDK as an add-on product with a SLES10 install source. However, when I run an autoyast install, I get prompted for the SDK license agreement. The SLES10 license agreement times out. How do I get the SDK and other add-on product license agreements to be timed out so the install will complete without human intervention? -jason

2 1

firstboot actions
by Ness, Todd 26 Oct '06

26 Oct '06

I want to use some of the "Configuration" steps provided by an interactive install, with my automated install. Like let a user create their account, set the hostname, set the time zone, set the keyboard, and walk through the hardware configuration section but skip things like the root password, firewall, online update, network test etc. Is there a way to configure this? Todd Ness EDS - Sun Microsystems JDS Model Office Home Office - +1-303-255-4530 Sun Model Office - +1-303-272-3924 Lakewood Office - +1-303-763-3832 Mobile Phone - +1-303-263-2589

2 1

Re: [suse-autoinstall] Repository in DVD
by Jonathan Meller 24 Oct '06

24 Oct '06

Ya, It works! :) , but what about taking the media to the target machine and install locally by DVD ??? Gordon.Schumacher(a)seagate.com wrote: > Jonathan Meller <jonathan.meller(a)tteng.com.br> wrote on 10/23/2006 01:53:48 > PM: > > # Hellos! > # > # Can I copy the repository tree to a DVD and install from it? > > Yup - loopback mount it to a directory, make that directory accessible > by a webserver, and add "install=http://my.server/path" to your command > line... and you're good to go! > > -- Jonathan Meller jonathan.meller(a)tteng.com.br ======================================================= Tools & Technologies - T&T Engenheiros Associados Ltda. Projetos de SW - Desenvolvendo soluções. Rua Riachuelo, 1098 Conj. 901 Centro - Porto Alegre - CEP 90010-272 Fone DDR: (51)3220-3260 Fone/Fax: (51)3220-3220 / 3220-3206 http://www.tteng.com.br/ tet(a)tteng.com.br =======================================================

1 0

Update network driver
by suselist＠nlsn.nu 24 Oct '06

24 Oct '06

Hi, what do I need to do to update the network drivers used during installation? I have a working autoyast environment for SLES9-SP3, but the hardware I install on is not supported by SLES9-SP3 unless I add the latest broadcom driver. I need to modify the boot CD, pxe-image and the driverupdate in the installsource. Are there any HowTo on this subject? Regards Daniel

2 1

Repository in DVD
by Jonathan Meller 23 Oct '06

23 Oct '06

Hellos! Can I copy the repository tree to a DVD and install from it? -- Jonathan Meller jonathan.meller(a)tteng.com.br ======================================================= Tools & Technologies - T&T Engenheiros Associados Ltda. Projetos de SW - Desenvolvendo soluções. Rua Riachuelo, 1098 Conj. 901 Centro - Porto Alegre - CEP 90010-272 Fone DDR: (51)3220-3260 Fone/Fax: (51)3220-3220 / 3220-3206 http://www.tteng.com.br/ tet(a)tteng.com.br =======================================================

1 0

lilo on ppc/IBM pSeries fails
by Frank Steiner 17 Oct '06

17 Oct '06

Hi, after I fixed that problem in my profile with the prep partition, Installation of SLES10 ppc on an IBM pSeries ran through, but setting up lilo fails. AY runs through, no error message, but the system didn't boot (different error messages on boot: prompt). I set up a chroot postscript with a sleep command so that I could login into the installing system with ssh, and found the following /mnt/etc/lilo.conf: # Modified by YaST2. Last modification on Mo Okt 16 10:37:54 UTC 2006 menu-scheme = Wb:kw:Wb:Wb timeout = 80 lba32 change-rules reset read-only prompt default = SLES_10 boot = /dev/sda image = /boot/vmlinux initrd = /boot/initrd ###Don't change this comment - YaST2 identifier: Original name: linux### label = SLES_10 root = /dev/sda3 image = /boot/vmlinux ###Don't change this comment - YaST2 identifier: Original name: failsafe### label = Failsafe append = " 3" initrd = /boot/initrd root = /dev/sda3 This can't work because there are many parameters that are not known on ppc. Indeed calling lilo in a chroot env returns: 141:/ # lilo ERROR: !!!!!!!!!! unkown option menu-scheme !!!!!!!!!!!!! and so on. After I removed all unknown options, it warned me that the "activate" entry was missing: 141:/ # lilo running on chrp guessing the chrp boot device Boot target is /dev/sda1 Warning: Extend PReP boot partition /dev/sda1 to hold yaboot 1+0 records in 1+0 records out 4096 bytes (4.1 kB) copied, 0.012297 seconds, 333 kB/s Installing /lib/lilo/chrp/yaboot.chrp onto /dev/sda1 Converted /etc/lilo.conf to /etc/yaboot.conf Warning: boot path not set to boot linux as requested Warning: please add '/pci@3fffdf0a000/pci@2/pci1069,b166@1/scsi@0/sd@8,0' somewhere to your boot path manually It looks like AY sets up a lilo.conf for an x86 system and not for PPC, but since no error message is returned in AY (it should if calling lilo fails, shouldn't it?), the system reboots into an unbootable state. Is this known and is there a fix for it already? You can find the log here: http://www.bio.ifi.lmu.de/~steiner/y2log.ppc2.gz cu, Frank -- Dipl.-Inform. Frank Steiner Web: http://www.bio.ifi.lmu.de/~steiner/ Lehrstuhl f. Bioinformatik Mail: http://www.bio.ifi.lmu.de/~steiner/m/ LMU, Amalienstr. 17 Phone: +49 89 2180-4049 80333 Muenchen, Germany Fax: +49 89 2180-99-4049 * Rekursion kann man erst verstehen, wenn man Rekursion verstanden hat. *

2 5

Hi,
by Jochen Schaefer 16 Oct '06

16 Oct '06

Hi, I'm trying to do a network installation of SLEDx86_64 to a vmware 64Bit-instance. The installation source is originated from a September 2006 EVAL DVD. Unfortunately it does not work for x86_64: access.log: "GET /inst/streams/sled10/x86_64/boot/i386/root HTTP/1.0" 404 1044 "-" "-" The directory boot/i386 does not exists neither on the x86_64 DVD nor on my instserver instead and like expected boot/x86_64 directory exists Creating a Link i386->x86_64 didn't work too. The process stoped some GET-Requests later. Wenn installing from i386 source everything is fine: "GET /inst/streams/sled10/i386/boot/i386/root HTTP/1.0" 200 84094976 "-" "-" Installing from DVD worked for both architectures. Is this a broken DVD-Set? Jochen -- Jochen Schaefer Senior Consultant Integrated Services Novell GmbH Mobil: +49(0)1735876969 E-mail: jschaef(a)novell.com Address: Duesseldorf , 40470, Germany Noerdlicher Zubringer 9-11 http://www.novell.com

1 0

RE: [suse-autoinstall] can not find installation source
by GUNREBEN, PETER (Peter) 13 Oct '06

13 Oct '06

Lisa, Lisa Dong wrote: > On Wed, 11 Oct 2006, GUNREBEN, PETER (Peter) wrote: > > Lisa Dong wrote: > > > > > when I boot up the system, I see the the system request > > > IP address from the dhcp server,and dhcp offer the > > > IP address to that mac address, it then load the kernel, > > > .....start hardware detect, usb device detect, then > > > try to load info from eth0 eth1 > > > then stop right here, a red screen appear, can not find > > > installation source [...] > > Additionally, I had to add the kernel module for the NIC > > (in my case: "insmod=tg3") and also some SATA and SCSI > > modules to get the installation working. You may also > > try to set "netdevice=eth0". > > > > BTW, when the red screen appears, you may press > > <Ctrl>-<Alt>-F9 and try to mount the NFS installation > > source manually, just to see whether this works. > I did try netwait=30, netdevice=eth0, and tried manually > mount of installation source, none of them work. In the <Ctrl>-<Alt>-F9 console: Have you tried to "insmod" your NIC driver? What does "ifconfig" tell you? Can you "ping" any computer in your subnet? Peter.

3 2

SLES 10 autoinstall not working with serial console
by Stefan Hinker - Sun Solution Center - Benchmark Center Germany 13 Oct '06

13 Oct '06

Hi All, I have a working configuration of autoyast/autoinstall for SLES10. This configuration breaks (stops with the "An error occurred during the installation" message) if I include the option "console=ttyS0" in the linuxrc parameters. The last error message I see on syslog is: yast2[3711]: <5> [ui-ncurses] YNCursesUI.cc(YNCursesUI):101 NCurses: (-1) newterm() failed Has anyone seen this before? Is there a fix/workaround available? Should I log a bug against this? Any reply appreciated. Config files and syslog output available on request. stefan -- Stefan Hinker Sun Solution Center - Benchmarking Tel: +49 6103 752-300 Sun Microsystems GmbH Fax: +49 6103 752-299 Amperestr. 6 Stefan.Hinker(a)Sun.COM D-63225 Langen http://www.sun.com/solutioncenters/

2 4

RE: [suse-autoinstall] can not find installation source
by GUNREBEN, PETER (Peter) 11 Oct '06

11 Oct '06

Lisa, Lisa Dong wrote: > when I boot up the system, I see the the system request IP > address from the dhcp server,and dhcp offer the IP address to > that mac address, it then load the kernel, .....start > hardware detect, usb device detect, then try to load info from eth0 > eth1 > > then stop right here, a red screen appear, can not find > installation source > > Here is my info file > > default linux > serial 0,9600n8 > label linux > kernel 10.1kernel > append console=tty0 initrd=10.1initrd.img insmod=mptsas > autoyast=http://10.128.128.11/garibaldi_node.xml netmask=255.255.240.0 > install=nfs://10.128.128.11/export/dist/SuSe10.1 ^^^^ This is not your info file, is it? For my Broadcom NIC, the netwait=5 was not enough. I'm actually using netwait=10. Additionally, I had to add the kernel module for the NIC (in my case: "insmod=tg3") and also some SATA and SCSI modules to get the installation working. You may also try to set "netdevice=eth0". BTW, when the red screen appears, you may press <Ctrl>-<Alt>-F9 and try to mount the NFS installation source manually, just to see whether this works. Peter.

2 1

can not find installation source
by Lisa Dong 11 Oct '06

11 Oct '06

my install server server(dhcp server, tftp server and nfs server) has two network interface, one for public, one for internal, the autoinstallation for public network works, but the installation for internal network doesn't work, the error messages are "can not find installation source", when I tried to do the internal network autoinstall, I change dhcp server and control file in ~pxelinux.cfg to the internal network settings(using internal IP....) the contents in the /etc/exports file is export *(ro,all_squash,async,insecure) I can mount this nfs file from another internal machine, but it can't mount for internal autointall. Any suggestion is appreciated. Lisa

2 3

Partitioning issues with pSeries
by Frank Steiner 10 Oct '06

10 Oct '06

Hi, I'm trying to install SLES10 on an IBM pSeries p655. I use the same partitioning scheme that I used successfully for SLES10 in i586, just that I need a special prep-type partition as /dev/sda1. However, partitioning fails. Looking at y2log, it seems that AY creates an additional primary partition with ext2 or sth. The log file is here: http://www.bio.ifi.lmu.de/~steiner/y2log.ppc.gz And I used the following profile (derived from SLES9 and the working SLES10 i586 profiles). Any ideas what I'm doing wrong? cu, Frank <?xml version="1.0"?> <!DOCTYPE profile SYSTEM "/usr/share/autoinstall/dtd/profile.dtd"> <profile xmlns="http://www.suse.com/1.0/yast2ns" xmlns:config="http://www.suse.com/1.0/configns"> <bootloader> <global> </global> <loader_device>/dev/sda</loader_device> <loader_type>lilo</loader_type> <location>custom</location> </bootloader> <partitioning config:type="list"> <drive> <device>/dev/sda</device> <partitions config:type="list"> <partition> <create config:type="boolean">true</create> <filesystem config:type="symbol">prep</filesystem> <format config:type="boolean">true</format> <fstopt>defaults</fstopt> <mount>prep</mount> <partition_nr config:type="integer">1</partition_nr> <partition_type>primary</partition_type> <size>1</size> </partition> <partition> <create config:type="boolean">true</create> <filesystem config:type="symbol">swap</filesystem> <format config:type="boolean">true</format> <fstopt>defaults</fstopt> <mount>swap</mount> <partition_nr config:type="integer">2</partition_nr> <partition_type>primary</partition_type> <size>2gb</size> </partition> <partition> <create config:type="boolean">true</create> <filesystem config:type="symbol">ext3</filesystem> <format config:type="boolean">true</format> <fstopt>defaults</fstopt> <mount>/</mount> <partition_nr config:type="integer">3</partition_nr> <partition_type>primary</partition_type> <size>15gb</size> </partition> <partition> <create config:type="boolean">true</create> <filesystem config:type="symbol">reiser</filesystem> <format config:type="boolean">true</format> <fstopt>defaults</fstopt> <mount>/local</mount> <partition_nr config:type="integer">5</partition_nr> <size>8gb</size> </partition> <partition> <create config:type="boolean">true</create> <filesystem config:type="symbol">ext3</filesystem> <format config:type="boolean">true</format> <fstopt>defaults</fstopt> <mount>/var</mount> <partition_nr config:type="integer">6</partition_nr> <size>5gb</size> </partition> <partition> <create config:type="boolean">true</create> <filesystem config:type="symbol">reiser</filesystem> <format config:type="boolean">true</format> <fstopt>defaults</fstopt> <mount>/usr/local/storage</mount> <partition_nr config:type="integer">7</partition_nr> <size>max</size> </partition> </partitions> <use>all</use> </drive> </partitioning> </profile> -- Dipl.-Inform. Frank Steiner Web: http://www.bio.ifi.lmu.de/~steiner/ Lehrstuhl f. Bioinformatik Mail: http://www.bio.ifi.lmu.de/~steiner/m/ LMU, Amalienstr. 17 Phone: +49 89 2180-4049 80333 Muenchen, Germany Fax: +49 89 2180-99-4049 * Rekursion kann man erst verstehen, wenn man Rekursion verstanden hat. *

2 4

how to test without yast
by Arvid Walter 10 Oct '06

10 Oct '06

Hi, I have still problems understanding the results of merging mutible configurations. As far as I know combining classes is supposed to be a merge between different classes of only one member of a class each. merge Software/nagios.xml <-------> Network/primergy.xml I use a class 'Software' and have several xmls, nagios.xml, vmware.xml, base.xml e.g. residing in the corresponding directory. Unfortunately the packages and scripts section will be merged althought I use the dont_merge element. To understand the way of merging it is helpfull to test without a complete installation process. How can I achive that using xsltproc e.g. ? p.s. I dont want to use yast for a test

2 1

AutoYaST and LVM hassles?
by David J N Begley 09 Oct '06

09 Oct '06

Is anyone using AutoYaST to build/rebuild machines using LVM when those machines may already have LVs/VGs on the existing hard disks? I'm currently hitting an annoying problem with 9.2 and was wondering if anyone using a newer version of SuSE can verify whether or not this particular problem has been fixed. Essentially, it's the same problem previously reported here: http://lists.suse.com/archive/suse-autoinstall/2006-Mar/0005.html Unfortunately the recommended fix (using a pre-script instead of initialize=true) isn't working for me; I've tried using parted to "mklabel msdos" on the disks, I've even tried manually "lvremove" followed by "vgremove" and then parted's "mklabel msdos" (all according to the logs, have been successful) - all these in a pre-script, but the dreaded "lvremove" error keeps reappearing. It's as if AutoYaST has learnt the LVs very early on in the boot process and remembers them up to that point (despite the fact that the pre-script has removed them by this time), then insists on trying to remove them _after_ having already removed all the partitions (rather than the reverse). I've managed to work around just about every other bug/problem I've so far hit with AutoYaST, except this one. If someone can confirm that this is fixed in newer versions then I'll just sit tight 'til 10.2 is released. :-) Thanks..

2 2

RE: [suse-autoinstall] rules examples
by Marlier, Ian 06 Oct '06

06 Oct '06

> -----Original Message----- > From: Ness, Todd [mailto:todd.ness@eds.com] > Sent: Friday, October 06, 2006 12:03 PM > To: suse-autoinstall(a)suse.com > Subject: [suse-autoinstall] rules examples > > I have an old email that shows that rules and class examples can be > found at ... > http://yast.suse.com/autoinstall/9.1/html/rulesandclass.html#rules > > but that URL no longer works. > > Is there a more up to date location for SLED10 or SuSE10 based > information? > > Todd Ness > http://www.suse.de/~ug/autoyast_doc/index.html

1 0

Kernel Options
by discip＠pjm.com 06 Oct '06

06 Oct '06

Is there an easy way to automatically append an option to the default kernel that is installed? Or do I need to hack at this with some perl? Thanks, Paul

2 2

rules examples
by Ness, Todd 06 Oct '06

06 Oct '06

I have an old email that shows that rules and class examples can be found at ... http://yast.suse.com/autoinstall/9.1/html/rulesandclass.html#rules but that URL no longer works. Is there a more up to date location for SLED10 or SuSE10 based information? Todd Ness

1 0

RE: [suse-autoinstall] Online Update not functioning after autoinstall
by Marlier, Ian 02 Oct '06

02 Oct '06

Anyone have thoughts on this question? I'm still totally stumped... - Ian > -----Original Message----- > From: Marlier, Ian [mailto:ian.marlier@studentuniverse.com] > Sent: Wednesday, September 27, 2006 10:43 AM > To: suse-autoinstall(a)suse.com > Subject: [suse-autoinstall] Online Update not functioning after > autoinstall > > Hey, all -- > > Working on autobuilding with SUSE 10.1. I've got a local install > source, rsynced from mirrors.kernel.org (I think it was). > > The installation works fine, but after install, Online Updates doesn't > function. > > The error that I get when trying to configure Online Update is "No > products to register". It looks like that error is thrown when the > products returned by `/usr/lib64/zmd/query-pool products` don't > intersect with Novell's list of supported SUSE products. And yet... > [root@(fts0/dbopteron5):~]# /usr/lib64/zmd/query-pool products > |product|SUSE-Linux-10.1-FTP|10.1-0|x86_64 > [root@(fts0/dbopteron5):~]# > > and SUSE-Linux-10.1-FTP is one of the products returned by novell's > registration server... > > This does NOT happen if I install manually, using the same local source > (that's why I'm sending this here...) > > Has anyone: > - Seen this? > - Fixed this? > > If not, is it a bug with autoyast, or a bug more generally with zmd? > > -- > To unsubscribe, e-mail: suse-autoinstall-unsubscribe(a)suse.com > For additional commands, e-mail: suse-autoinstall-help(a)suse.com

1 0