openSUSE Autoinstall May 2013

autoinstall@lists.opensuse.org

3 participants
4 discussions

[opensuse-autoinstall] Failure with SuseConfig on Autoyast
by Mario Gzuk 13 Aug '13

13 Aug '13

Hi, since round about one week we get the following error. The setup stands in this state, autoinstall is broken. 2013-02-06 13:45:57 <1> hostname(7562) [YCP] clients/inst_autoconfigure.ycp:41 current step: 26 2013-02-06 13:45:57 <1> hostname(7562) [wfm] Y2CCWFM.cc(createInLevel):148 Parsing finished 2013-02-06 13:45:57 <1> hostname(7562) [Interpreter] mail/widgets.ycp:121 Calling YaST client mail_auto 2013-02-06 13:45:57 <1> hostname(7562) [YCP] clients/mail_auto.ycp:31 ---------------------------------------- 2013-02-06 13:45:57 <1> hostname(7562) [YCP] clients/mail_auto.ycp:32 Mail auto started 2013-02-06 13:45:58 <1> hostname(7562) [YCP] SuSEFirewall.ycp:2522 Firewall configuration has been changed. Writing: $["FW_ALLOW_FW_BROADCAST_DMZ":"no", "FW_ALLOW_FW_BROADCAST_EXT":"no", "FW_ALLOW_FW_BROADCAST_INT":"no", "FW_CONFIGURATIONS_EXT":"sshd", "FW_DEV_EXT":"any eth0", "FW_IGNORE_FW_BROADCAST_DMZ":"no", "FW_IGNORE_FW_BROADCAST_EXT":"yes", "FW_IGNORE_FW_BROADCAST_INT":"no", "FW_IPSEC_TRUST":"no", "FW_LOAD_MODULES":"nf_conntrack_netbios_ns", "FW_LOG_ACCEPT_ALL":"no", "FW_LOG_ACCEPT_CRIT":"yes", "FW_LOG_DROP_ALL":"no", "FW_LOG_DROP_CRIT":"yes", "FW_MASQUERADE":"no", "FW_PROTECT_FROM_INT":"no", "FW_ROUTE":"no", "enable_firewall":false, "start_firewall":false]. 2013-02-06 13:45:58 <1> hostname(7562) [YCP] SuSEFirewall.ycp:2545 Disabling firewall services 2013-02-06 13:45:58 <1> hostname(7562) [YCP] Service.ycp:414 Disabling service SuSEfirewall2_setup 2013-02-06 13:45:58 <1> hostname(7562) [YCP] Service.ycp:414 Disabling service SuSEfirewall2_init 2013-02-06 13:45:58 <1> hostname(7562) [YCP] Service.ycp:403 Enabling service postfix 2013-02-06 13:45:58 <3> hostname(7562) [agent-ini] IniParser.cc(parse):556 Can not open /etc/sysconfig/amavis. 2013-02-06 13:45:58 <1> hostname(7562) [YCP] Service.ycp:82 Der Dienst amavis existiert nicht. 2013-02-06 13:45:58 <3> hostname(7562) [YCP] Service.ycp:165 Service amavis does not exist. 2013-02-06 13:45:58 <1> hostname(7562) [YCP] Service.ycp:82 Der Dienst freshclam existiert nicht. 2013-02-06 13:45:58 <3> hostname(7562) [YCP] Service.ycp:165 Service freshclam does not exist. 2013-02-06 13:45:58 <1> hostname(7562) [YCP] Service.ycp:82 Der Dienst clamd existiert nicht. 2013-02-06 13:45:58 <3> hostname(7562) [YCP] Service.ycp:165 Service clamd does not exist. 2013-02-06 13:45:58 <3> hostname(7562) [agent-ini] IniParser.cc(getTimeStamp):925 Unable to stat '/etc/sysconfig/amavis': Datei oder Verzeichnis nicht gefunden 2013-02-06 13:45:58 <3> hostname(7562) [bash] ShellCommand.cc(shellcommand):78 Setting up postfix local as MDA... 2013-02-06 13:45:58 <3> hostname(7562) [bash] ShellCommand.cc(shellcommand):78 Setting SPAM protection to "off"... 2013-02-06 13:46:00 <3> hostname(7562) [YCP] Report.ycp:523 Fehler bei der Ausführung von SuSEconfig. Can you help me with this issue? The file /etc/sysconfig/amavis exists at this state. Thank you. -- To unsubscribe, e-mail: opensuse-autoinstall+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-autoinstall+owner(a)opensuse.org

2 3

Re: [opensuse-autoinstall] Delete and install MBR
by Erico Mendonça 27 May '13

27 May '13

Try removing the "sections" section. AutoYaST should be able to guess the correct values. 2013/5/27 Erico Mendonça <erico.mendonca(a)gmail.com>: > Try removing the "sections" section. AutoYaST should be able to guess the > correct values. > > > > 2013/5/27 Daniel Spannbauer <ds(a)marco.de> >> >> Hello, >> >> I have the following part in my autoinst.xml: >> >> <bootloader> >> <activate config:type="boolean">true</activate> >> <global> >> <generic_mbr>true</generic_mbr> >> <activate>true</activate> >> <gfxmenu>/boot/message</gfxmenu> >> <lines_cache_id>2</lines_cache_id> >> <timeout config:type="integer">8</timeout> >> </global> >> <loader_type>grub</loader_type> >> <sections config:type="list"> >> <section> >> <append>resume=/dev/sda2 splash=silent showopts</append> >> <image>(hd0,0)/vmlinuz-2.6.37.1-1.2-pae</image> >> <initial>1</initial> >> <initrd>(hd0,0)/initrd-2.6.37.1-1.2-pae</initrd> >> <lines_cache_id>0</lines_cache_id> >> <name>openSUSE 11.4</name> >> <original_name>linux</original_name> >> <root>/dev/sda3</root> >> <type>image</type> >> <vgamode>0x31a</vgamode> >> </section> >> ... >> ... >> ... >> >> >> On a new Disk the installation works fine. But when I try to install it >> on the same machine again, I only get a black screen with a blinking >> cursor on the top left corner. >> >> If I erase the first blocks of the disk with dd if=/dev/zero of=/dev/sda >> and install the same system it works. >> >> Can anybody help me to find the error in my config? >> >> Regards >> >> Daniel >> >> -- >> Daniel Spannbauer Software Entwicklung >> marco Systemanalyse und Entwicklung GmbH Tel +49 8333 9233-27 Fax -11 >> Rechbergstr. 4-6, D 87727 Babenhausen Mobil +49 171 4033220 >> http://www.marco.de/ Email ds(a)marco.de >> Geschäftsführer Martin Reuter HRB 171775 Amtsgericht München >> -- >> To unsubscribe, e-mail: opensuse-autoinstall+unsubscribe(a)opensuse.org >> To contact the owner, e-mail: opensuse-autoinstall+owner(a)opensuse.org >> > > > > -- > -- Erico -- -- Erico -- To unsubscribe, e-mail: opensuse-autoinstall+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-autoinstall+owner(a)opensuse.org

1 0

[opensuse-autoinstall] Delete and install MBR
by Daniel Spannbauer 27 May '13

27 May '13

Hello, I have the following part in my autoinst.xml: <bootloader> <activate config:type="boolean">true</activate> <global> <generic_mbr>true</generic_mbr> <activate>true</activate> <gfxmenu>/boot/message</gfxmenu> <lines_cache_id>2</lines_cache_id> <timeout config:type="integer">8</timeout> </global> <loader_type>grub</loader_type> <sections config:type="list"> <section> <append>resume=/dev/sda2 splash=silent showopts</append> <image>(hd0,0)/vmlinuz-2.6.37.1-1.2-pae</image> <initial>1</initial> <initrd>(hd0,0)/initrd-2.6.37.1-1.2-pae</initrd> <lines_cache_id>0</lines_cache_id> <name>openSUSE 11.4</name> <original_name>linux</original_name> <root>/dev/sda3</root> <type>image</type> <vgamode>0x31a</vgamode> </section> ... ... ... On a new Disk the installation works fine. But when I try to install it on the same machine again, I only get a black screen with a blinking cursor on the top left corner. If I erase the first blocks of the disk with dd if=/dev/zero of=/dev/sda and install the same system it works. Can anybody help me to find the error in my config? Regards Daniel -- Daniel Spannbauer Software Entwicklung marco Systemanalyse und Entwicklung GmbH Tel +49 8333 9233-27 Fax -11 Rechbergstr. 4-6, D 87727 Babenhausen Mobil +49 171 4033220 http://www.marco.de/ Email ds(a)marco.de Geschäftsführer Martin Reuter HRB 171775 Amtsgericht München -- To unsubscribe, e-mail: opensuse-autoinstall+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-autoinstall+owner(a)opensuse.org

1 0

[opensuse-autoinstall] Feature: Add <location> tag to <file_script> to get file script from remote location
by Joschi Brauchle 08 May '13

08 May '13

Hi, I have a pretty long bash script as a <file_script>, modifying one of the files provided via <file>. I tried to move the script source out of the XML file by using a <location> tag instead of the <source> inside the <file_script>. But it looks like this is not supported yet...would be nice to have though! Best regards, J Brauchle

4 6

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

openSUSE Autoinstall May 2013