openSUSE Autoinstall February 2015

autoinstall@lists.opensuse.org

8 participants
5 discussions

[opensuse-autoinstall] autoinstallation using images in oS13.2?

by vetter＠physik.uni-wuerzburg.de

Hi, the autoyast documentation in oS13.2 does not mention images any longer. Does it still work? I used it once upon a time, but don't remember how. I also don't find a documentation for it. Is the image just a tar.gz of a preconfigured system? How do I specify it in the control file? -- Mit freundlichen Gruessen, Andreas Vetter -- To unsubscribe, e-mail: opensuse-autoinstall+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-autoinstall+owner(a)opensuse.org

7 years, 2 months

[opensuse-autoinstall] autoinstall REPO priority ?

by h15234＠mailas.com

hi I'm setting up a Opensuse autoyast profiles that I'll eventually use for populating Xen DomUs For various profiles I'll need different sets of add-on repositories. It's clear how to add the add-ons with medial_utl <add_on_products config:type="list"> <listentry> <media_url><![CDATA[http://download.opensuse.org/repositories/.../]]></media_url> But I can't seem to find how to set the repo PRIORITY for each added add-on. I can see the question being asked online since at least 2009. Back then it wasn't available but the dev used "yet" a few times ... I'm assuming enough time's passed. How do you set repo priority in autoyast? hanlon -- To unsubscribe, e-mail: opensuse-autoinstall+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-autoinstall+owner(a)opensuse.org

7 years, 2 months

[opensuse-autoinstall] DHCP hostname not used (anymore) during installation stage2, even with dhcp_hostname=true

by Joschi Brauchle

Hi all, I have the following XML file <networking> <dhcp_options> <dhclient_client_id/> <dhclient_hostname_option>AUTO</dhclient_hostname_option> </dhcp_options> <dns> <dhcp_hostname config:type="boolean">true</dhcp_hostname> <domain>lnt.ei.tum.de</domain> <hostname>opensuse132-auto</hostname> <resolv_conf_policy>auto</resolv_conf_policy> <searchlist config:type="list"> <search>lnt.ei.tum.de</search> </searchlist> <write_hostname config:type="boolean">true</write_hostname> </dns> <interfaces config:type="list"> <interface> <bootproto>dhcp4</bootproto> <device>eth0</device> <startmode>onboot</startmode> <usercontrol>no</usercontrol> </interface> </interfaces> <ipv6 config:type="boolean">true</ipv6> <keep_install_network config:type="boolean">false</keep_install_network> <managed config:type="boolean">true</managed> <routing> <ipv4_forward config:type="boolean">false</ipv4_forward> <ipv6_forward config:type="boolean">false</ipv6_forward> </routing> </networking> Problem: The DHCP configures hostname is NOT set as the hostname during stage2, but keeps "opensuse132-auto" as given in the XML. Only after a first reboot (which should no be needed) after installation completes, the hostname is picked up correctly. This all used to work. From the Yast2 GIT pages I see that there were changes to the code where the DHCP hostname is considered: https://github.com/yast/yast-network/commit/beaeba1826e475861c0c8cb3e26d714… Possibly this broke the previously working feature. This is the relevant part of y2log (2nd stage) ---------------------- 2015-02-11 10:28:02 <1> linux-vlkb.site(2574) [Ruby] clients/inst_autoconfigure.rb:113 current resource: networking 2015-02-11 10:28:02 <1> linux-vlkb.site(2574) [Ruby] clients/inst_autoconfigure.rb:128 Writing configuration for lan 2015-02-11 10:28:02 <1> linux-vlkb.site(2574) [Ruby] clients/inst_autoconfigure.rb:168 Calling auto client with: $["dhcp_options":$["dhclient_hostname_option":"AUTO"], "dns":$["dhcp_hostname":true, "domain":"lnt.ei.tum.de", "hostname":"opensuse132-auto", "resolv_conf_policy":"auto", "searchlist":["lnt.ei.tum.de"], "write_hostname":true], "interfaces":[$["bootproto":"dhcp4", "device":"eth0", "startmode":"onboot", "usercontrol":"no"]], "ipv6":true, "keep_install_network":false, "managed":true, "routing":$["ipv4_forward":false, "ipv6_forward":false], "start_immediately":true] 2015-02-11 10:28:02 <1> linux-vlkb.site(2574) [Ruby] clients/inst_autoconfigure.rb:314 current step: 3 desc:Configuring lan 2015-02-11 10:28:02 <1> linux-vlkb.site(2574) [Interpreter] modules/Call.rb:45 Calling YaST client lan_auto 2015-02-11 10:28:02 <1> linux-vlkb.site(2574) [Ruby] yast/wfm.rb:181 Call client /usr/share/YaST2/clients/lan_auto.rb 2015-02-11 10:28:02 <1> linux-vlkb.site(2574) [Ruby] clients/lan_auto.rb:36 ---------------------------------------- 2015-02-11 10:28:02 <1> linux-vlkb.site(2574) [Ruby] clients/lan_auto.rb:37 Lan autoinst client started 2015-02-11 10:28:02 <1> linux-vlkb.site(2574) [Ruby] modules/Lan.rb:494 Writing configuration 2015-02-11 10:28:02 <1> linux-vlkb.site(2574) [Ruby] modules/SuSEFirewall.rb:1122 Installed -> true 2015-02-11 10:28:02 <1> linux-vlkb.site(2574) [Ruby] modules/NetworkInterfaces.rb:801 Writing configuration 2015-02-11 10:28:02 <1> linux-vlkb.site(2574) [Ruby] modules/NetworkInterfaces.rb:807 OriginalDevs=$[] 2015-02-11 10:28:02 <1> linux-vlkb.site(2574) [Ruby] modules/NetworkInterfaces.rb:808 Devs=$["eth":$["eth0":$["BOOTPROTO":"dhcp4", "STARTMODE":"auto", "USERCONTROL":"no"]]] 2015-02-11 10:28:02 <1> linux-vlkb.site(2574) [Ruby] modules/NetworkInterfaces.rb:820 Deleted=[] 2015-02-11 10:28:02 <1> linux-vlkb.site(2574) [Ruby] modules/NetworkConfig.rb:167 Writing configuration 2015-02-11 10:28:02 <1> linux-vlkb.site(2574) [Ruby] modules/Routing.rb:236 Writing configuration 2015-02-11 10:28:02 <1> linux-vlkb.site(2574) [Ruby] yast2/systemd_unit.rb:125 `systemctl show SuSEfirewall2.service --property=Id --property=MainPID --property=Description --property=LoadState --property=ActiveState --property=SubState --property=UnitFileState --property=FragmentPath ` 2015-02-11 10:28:02 <1> linux-vlkb.site(2574) [Ruby] modules/SuSEFirewall.rb:1416 Firewall service is enabled 2015-02-11 10:28:02 <1> tueilnt-st-test(2574) [Ruby] modules/DNS.rb:371 Writing configuration 2015-02-11 10:28:02 <1> tueilnt-st-test(2574) [Ruby] modules/DNS.rb:377 nameservers=[] 2015-02-11 10:28:02 <1> tueilnt-st-test(2574) [Ruby] modules/DNS.rb:378 searchlist=["lnt.ei.tum.de"] 2015-02-11 10:28:02 <1> tueilnt-st-test(2574) [Ruby] modules/DNS.rb:379 hostname=opensuse132-auto 2015-02-11 10:28:02 <1> tueilnt-st-test(2574) [Ruby] modules/DNS.rb:380 domain=lnt.ei.tum.de 2015-02-11 10:28:02 <1> tueilnt-st-test(2574) [Ruby] modules/DNS.rb:381 dhcp_hostname=true, write_hostname=true 2015-02-11 10:28:03 <1> opensuse132-auto(2574) [Ruby] network/runtime.rb:41 Updating sendmail and/or postfix configuration. 2015-02-11 10:28:06 <1> opensuse132-auto(2574) [Ruby] modules/Host.rb:73 Dummy 127.0.0.2 IP will be added 2015-02-11 10:28:06 <1> opensuse132-auto(2574) [Ruby] modules/Host.rb:125 Writing hosts configuration 2015-02-11 10:28:06 <1> opensuse132-auto(2574) [Ruby] modules/Host.rb:166 hosts=$["127.0.0.2":["opensuse132-auto.lnt.ei.tum.de opensuse132-auto"]] 2015-02-11 10:28:06 <1> opensuse132-auto(2574) [Ruby] modules/Host.rb:168 127.0.0.2 (["opensuse132-auto.lnt.ei.tum.de opensuse132-auto"]:nil) ---------------------- One can see that the DHCP hostname is picked up shortly (~5 lines) before it is replaced by the XML-configured hostname. Best regards, JB

7 years, 3 months

[opensuse-autoinstall] Network matching rules failing on 13.2

by 686f6c6d

Greetings, I have just filed https://bugzilla.opensuse.org/show_bug.cgi?id=916628 -- my network isn't detected correctly, so my network matching rules fail. Is anybody else experiencing this problem? -- Kind regards Christopher 'm4z' Holm / 686f6c6d "We must respect the other fellow's religion, but only in the sense and to the extent that we respect his theory that his wife is beautiful and his children smart." --H. L. Mencken -- To unsubscribe, e-mail: opensuse-autoinstall+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-autoinstall+owner(a)opensuse.org

7 years, 3 months

[opensuse-autoinstall] opensuse 12.3: Configuering services an xinetd

by Daniel Spannbauer

Hello, I try to install opensuse 12.3 with autoyast. There are several services to be started, also the telnet-server with inetd. But sshd is not startet, rpcbind also, telnet is "disable=yes" in /etc/xinetd.d......but I dont know why. Attached the config. Any Ideas whats going wrong here? Regards Daniel -- Daniel Spannbauer Systemadministration marco Systemanalyse und Entwicklung GmbH Tel +49 8333 9233-0 Rechbergstr. 4-6 Fax +49 8333 9233-11 D 87727 Babenhausen Mobil +49 171 4033220 http://www.marco.de/ Email ds(a)marco.de Geschäftsführer Martin Reuter HRB 171775 Amtsgericht München

7 years, 3 months

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

openSUSE Autoinstall February 2015