June 2014 - openSUSE Kernel - openSUSE Mailing Lists

[opensuse-kernel] kernel-default-base-2.6.29-5.2.x86_64 rpm errors
by Dave Plater 18 Jul '24

18 Jul '24

Hi, I'm busy updating to the latest factory kernel and have received the following errors from kernel-default-base installation (I did insert a blank dvd during the installation of the rpm by zypper):- WARNING: /lib/modules/2.6.29-rc8-5-default/kernel/drivers/scsi/sd_mod.ko needs unknown symbol crc_t10dif WARNING: /lib/modules/2.6.29-rc8-5-default/kernel/drivers/scsi/sr_mod.ko needs unknown symbol register_cdrom WARNING: /lib/modules/2.6.29-rc8-5-default/kernel/drivers/scsi/sr_mod.ko needs unknown symbol cdrom_ioctl WARNING: /lib/modules/2.6.29-rc8-5-default/kernel/drivers/scsi/sr_mod.ko needs unknown symbol cdrom_media_changed WARNING: /lib/modules/2.6.29-rc8-5-default/kernel/drivers/scsi/sr_mod.ko needs unknown symbol cdrom_get_media_event WARNING: /lib/modules/2.6.29-rc8-5-default/kernel/drivers/scsi/sr_mod.ko needs unknown symbol cdrom_release WARNING: /lib/modules/2.6.29-rc8-5-default/kernel/drivers/scsi/sr_mod.ko needs unknown symbol cdrom_open WARNING: /lib/modules/2.6.29-rc8-5-default/kernel/drivers/scsi/sr_mod.ko needs unknown symbol unregister_cdrom WARNING: /lib/modules/2.6.29-rc8-5-default/kernel/drivers/scsi/sr_mod.ko needs unknown symbol cdrom_number_of_slots And then these errors which I think IIRC happened before when the kernel was first split into three:- Kernel image: /boot/vmlinuz-2.6.29-rc8-5-default Initrd image: /boot/initrd-2.6.29-rc8-5-default Root device: /dev/disk/by-id/ata-WDC_WD800JB-00JJC0_WD-WMAM9RA78067-part3 (/dev/sda3) (mounted on / as xfs) Resume device: /dev/disk/by-id/ata-WDC_WD800JB-00JJC0_WD-WMAM9RA78067-part2 (/dev/sda2) FATAL: Module processor not found. WARNING: no dependencies for kernel module 'processor' found. FATAL: Module thermal not found. WARNING: no dependencies for kernel module 'thermal' found. FATAL: Module ata_generic not found. WARNING: no dependencies for kernel module 'ata_generic' found. FATAL: Module piix not found. WARNING: no dependencies for kernel module 'piix' found. FATAL: Module ide_pci_generic not found. WARNING: no dependencies for kernel module 'ide_pci_generic' found. FATAL: Module fan not found. WARNING: no dependencies for kernel module 'fan' found. FATAL: Module xfs not found. WARNING: no dependencies for kernel module 'xfs' found. FATAL: Module usbhid not found. WARNING: no dependencies for kernel module 'usbhid' found. Kernel Modules: scsi_mod libata ata_piix edd ahci sd_mod usbcore ohci-hcd ehci-hcd uhci-hcd WARNING: /dev/shm/mkinitramfs.0drQsZ/mnt/lib/modules/2.6.29-rc8-5-default/kernel/drivers/scsi/sd_mod.ko needs unknown symbol crc_t10dif Features: block usb resume.userspace resume.kernel Bootsplash: openSUSE (1280x1024) 22669 blocks Should I open a bug report about the errors which are possibly from inserting a dvd while the kernel rpm was installing? Regards Dave P -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-kernel+help(a)opensuse.org

2 2

[opensuse-kernel] Keep 3.11.y kernel for openSUSE 13.1 updates?
by Takashi Iwai 12 Sep '14

12 Sep '14

Hi, Since 3.11.y maintenance was discontinued by Greg, Ubuntu took over it. It made me wonder: are we willing to continue 3.11.y for openSUSE 13.1 updates, just relying on Ubuntu? Or, can we just move on 3.12.y? Takashi -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-kernel+owner(a)opensuse.org

27 80

[opensuse-kernel] factory: armv7l: fix kernel build
by matwey.kornilov＠gmail.com 01 Jul '14

01 Jul '14

>From e7147352639fd8f92b1cc85cff9bc5046c7a2130 Mon Sep 17 00:00:00 2001 From: "Matwey V. Kornilov" <matwey.kornilov(a)gmail.com> Date: Mon, 2 Jun 2014 20:17:29 +0400 Subject: [PATCH] Replace type of paddr to uint32_t. This patch helps to avoid the following build issue: drivers/gpu/drm/msm/msm_fbdev.c:108:2: error: passing argument 3 of 'msm_gem_get_iova_locked' from incompatible pointer type [-Werror] msm_gem_get_iova_locked(fbdev->bo, 0, &paddr); ^ In file included from drivers/gpu/drm/msm/msm_fbdev.c:18:0: drivers/gpu/drm/msm/msm_drv.h:153:5: note: expected 'uint32_t *' but argument is of type 'dma_addr_t *' int msm_gem_get_iova_locked(struct drm_gem_object *obj, int id, ^ Signed-off-by: Matwey V. Kornilov <matwey(a)sai.msu.ru> Patch-mainline: Submitted, 1401879270 - linux-arm-msm(a)vger.kernel.org Signed-off-by: Matwey V. Kornilov <matwey.kornilov(a)gmail.com> --- This is for Factory, 3.15 is still failed for armv7l. drivers/gpu/drm/msm/msm_fbdev.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/msm/msm_fbdev.c b/drivers/gpu/drm/msm/msm_fbdev.c index a752ab8..5107fc4 100644 --- a/drivers/gpu/drm/msm/msm_fbdev.c +++ b/drivers/gpu/drm/msm/msm_fbdev.c @@ -59,7 +59,7 @@ static int msm_fbdev_create(struct drm_fb_helper *helper, struct drm_framebuffer *fb = NULL; struct fb_info *fbi = NULL; struct drm_mode_fb_cmd2 mode_cmd = {0}; - dma_addr_t paddr; + uint32_t paddr; int ret, size; sizes->surface_bpp = 32; -- 1.9.3 -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-kernel+owner(a)opensuse.org

5 10

[opensuse-kernel] [PATCH] rpm/kernel-obs-build.spec.in: add support for aarch64
by Andreas Schwab 30 Jun '14

30 Jun '14

Use Image for kernel_name on aarch64 and add virtio_mmio to KERNEL_MODULES. --- rpm/kernel-obs-build.spec.in | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/rpm/kernel-obs-build.spec.in b/rpm/kernel-obs-build.spec.in index 9448e50..49a1d62 100644 --- a/rpm/kernel-obs-build.spec.in +++ b/rpm/kernel-obs-build.spec.in @@ -93,7 +93,7 @@ chmod a+rx /usr/lib/dracut/modules.d/80obs/setup_obs.sh # a longer list to have them also available for qemu cross builds where x86_64 kernel runs in eg. arm env. # this list of modules where available on build workers of build.opensuse.org, so we stay compatible. -export KERNEL_MODULES="loop dm-mod dm-snapshot binfmt-misc fuse kqemu squashfs ext2 ext3 ext4 reiserfs nf_conntrack_ipv6 binfmt_misc virtio_pci virtio_blk fat vfat nls_cp437 nls_iso8859-1 ibmvscsi ibmvscsic" +export KERNEL_MODULES="loop dm-mod dm-snapshot binfmt-misc fuse kqemu squashfs ext2 ext3 ext4 reiserfs nf_conntrack_ipv6 binfmt_misc virtio_pci virtio_mmio virtio_blk fat vfat nls_cp437 nls_iso8859-1 ibmvscsi ibmvscsic" ROOT="" [ -e "/dev/vda" ] && ROOT="-d /dev/vda" [ -e /dev/hda1 ] && ROOT="-d /dev/hda1" # for xen builds @@ -101,6 +101,9 @@ ROOT="" %ifarch s390 s390x %define kernel_name image %endif +%ifarch aarch64 +%define kernel_name Image +%endif %if 0%{?suse_version} < 1320 # For SLE 11 -- 2.0.1 -- Andreas Schwab, SUSE Labs, schwab(a)suse.de GPG Key fingerprint = 0196 BAD8 1CE9 1970 F4BE 1748 E4D4 88E3 0EEA B9D7 "And now for something completely different." -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-kernel+owner(a)opensuse.org

2 1

[opensuse-kernel] i586 failed and 86_64 succeeded in Kernel:linux-next > kernel-vanilla build log
by doiggl＠velocitynet.com.au 27 Jun '14

27 Jun '14

Hello I see for kernel-vanilla-3.16.rc1.next i586 failed 86_64 succeeded in openSUSE Build Service > Projects > Kernel:linux-next > kernel-vanilla build log error listed in log. Question can it be updated to:linux-3.16-rc2 https://www.kernel.org/pub/linux/kernel/v3.x/testing/linux-3.16-rc2.tar.xz --Glenn Build Results Reload Rpmlint Results standard Repository has been published i586 failed Repository has been published x86_64 succeeded: >From the build log: [ 5110s] BUILD arch/x86/boot/bzImage [ 5110s] Setup is 17276 bytes (padded to 17408 bytes). [ 5110s] System is 4646 kB [ 5110s] CRC e56e6dcf [ 5110s] Kernel: arch/x86/boot/bzImage is ready (#1) [ 5339s] ERROR: "__udivdi3" [drivers/net/wireless/ath/wil6210/wil6210.ko] undefined! [ 5342s] make[3]: *** [__modpost] Error 1 [ 5342s] make[2]: *** [modules] Error 2 [ 5342s] make[1]: *** [sub-make] Error 2 [ 5342s] make: *** [__sub-make] Error 2 [ 5342s] + test 2 -eq 0 [ 5342s] + test 01 -gt 0 [ 5342s] + /home/abuild/rpmbuild/SOURCES/try-disable-staging-driver buildlog [ 5343s] + exit 1 [ 5343s] error: Bad exit status from /var/tmp/rpm-tmp.TvRhml (%build) [ 5343s] [ 5343s] [ 5343s] RPM build errors: [ 5343s] Bad exit status from /var/tmp/rpm-tmp.TvRhml (%build) -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-kernel+owner(a)opensuse.org

3 2

[opensuse-kernel] The use of Kernel:HEAD
by Stephan Kulow 27 Jun '14

27 Jun '14

Hi, This is pretty much history repeating, but I feel *very* disappointed with the way you treat Factory. Factory tumbles from one RC to another. And while I try to get 3.15.1 in myself, you replace Kernel:HEAD with rc2? What's the thinking behind that? I guess it's not too far stretched to claim that no one is maintaining the kernel-source package in Factory. All packaging activities are done by brainless scripts ;( Greetings, Stephan -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-kernel+owner(a)opensuse.org

4 8

[opensuse-kernel] request: pull USB3 upstream kernel patch to Kernel:stable
by grantksupport＠operamail.com 27 Jun '14

27 Jun '14

An upstream kernel patch has been tested, and verified to work, for a reported USB3 driver crash Bug 878489 - Opensuse 13.1 throws CALL TRACE and fails to boot when USB3 (xhci_hcd) card is added. https://bugzilla.novell.com/show_bug.cgi?id=878489 I've made a review request at https://build.opensuse.org/project/requests/Kernel:stable not sure if that's the right procedure. Can this patch get added to Kernel:stable builds, for at least Opensuse 13.1/64? Thanks. -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-kernel+owner(a)opensuse.org

3 6

[opensuse-kernel] [PATCH] rpm/kernel-obs-build.spec.in: Use Image for kernel_name on aarch64
by Andreas Schwab 26 Jun '14

26 Jun '14

--- rpm/kernel-obs-build.spec.in | 3 +++ 1 file changed, 3 insertions(+) diff --git a/rpm/kernel-obs-build.spec.in b/rpm/kernel-obs-build.spec.in index 9448e50..7dd41e7 100644 --- a/rpm/kernel-obs-build.spec.in +++ b/rpm/kernel-obs-build.spec.in @@ -101,6 +101,9 @@ ROOT="" %ifarch s390 s390x %define kernel_name image %endif +%ifarch aarch64 +%define kernel_name Image +%endif %if 0%{?suse_version} < 1320 # For SLE 11 -- 2.0.1 -- Andreas Schwab, SUSE Labs, schwab(a)suse.de GPG Key fingerprint = 0196 BAD8 1CE9 1970 F4BE 1748 E4D4 88E3 0EEA B9D7 "And now for something completely different." -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-kernel+owner(a)opensuse.org

1 0

[opensuse-kernel] Kernel 3.15 + radeon + hdmi = freeze
by Rafael Leal 24 Jun '14

24 Jun '14

Hello, I'm having trouble to get HDMI to work with kernel 3.15 (3.15.1-1 and the newly-released 3.15.1-2 from the repo kernel:stable) and the open-source radeon driver. If the HDMI cable is already connected before boot, the system completely freezes (sometimes/always due to kernel panic?). This is not new to 3.15: I've completely skipped 3.14 due to the same problem, and I'm still using 3.13.7. But in 3.15 HDMI at least works if the cable gets connected after the DE has been loaded, which did not happen with 3.14. I don't know where to find the appropriate kernel trace: dmesg only shows the current boot log, and what I could salvage from /var/log/messages is at the end of this message, but I think it does not cover the failure. I'm using: OpenSUSE 13.1 Repository: Kernel:Stable Name: kernel-desktop Version: 3.15.1-2.1.g3289da4 Arch: x86_64 01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] RV710/M92 [Mobility Radeon HD 4330/4350/4550] OpenGL vendor string: X.Org OpenGL renderer string: Gallium 0.4 on AMD RV710 OpenGL core profile version string: 3.1 (Core Profile) Mesa 10.2.1 It seems that at least arch has already gotten a fix: https://bugs.archlinux.org/task/39850 And this is the thread I've opened in the opensuse forums: http://forums.opensuse.org/showthread.php/496875-HDMI-not-working-with-3-14… Call stack from /var/log/messages: 2014-06-24T20:08:36.058246+03:00 linux-jq6w kernel: [ 30.190212] BUG: unable to handle kernel paging request at ffff880036305000 2014-06-24T20:08:36.058268+03:00 linux-jq6w kernel: [ 30.191004] IP: [<ffffffffa00a4ff4>] drm_crtc_helper_set_config+0x224/0xb00 [drm_kms_helper] 2014-06-24T20:08:36.058270+03:00 linux-jq6w kernel: [ 30.191004] PGD 2227067 PUD 2228067 PMD 3625c063 PTE 8000000036305161 2014-06-24T20:08:36.058272+03:00 linux-jq6w kernel: [ 30.191004] Oops: 0003 [#1] PREEMPT SMP 2014-06-24T20:08:36.058275+03:00 linux-jq6w kernel: [ 30.191004] Modules linked in: xt_pkttype xt_LOG xt_limit ip6t_REJECT xt_tcpudp nf_conntrack_ipv6 nf_defrag_ipv6 ip6table_raw ipt_REJECT iptable_raw xt_CT iptable_filter ip6table_mangle nf_conntrack_netbios_ns nf_conntrack_broadcast nf_conntrack_ipv4 nf_defrag_ipv4 ip_tables xt_conntrack nf_conntrack ip6table_filter ip6_tables x_tables snd_hda_codec_realtek snd_hda_codec_hdmi snd_hda_codec_generic snd_hda_intel snd_hda_controller snd_hda_codec snd_hwdep snd_pcm coretemp snd_seq snd_timer samsung_laptop snd_seq_device uvcvideo videobuf2_core videodev r8192e_pci(C) rtllib(C) lib80211 rtl8192se iTCO_wdt iTCO_vendor_support sr_mod rtl_pci serio_raw cdrom snd videobuf2_vmalloc rtlwifi pcspkr xpad mac80211 sky2 i2c_i801 cfg80211 videobuf2_memops rfkill joydev soundcore tpm_tis lpc_ich mfd_core ac battery button video tpm shpchp acpi_cpufreq sg dm_mod btrfs raid6_pq xor fan thermal radeon ttm drm_kms_helper processor drm i2c_algo_bit scsi_dh_alua scsi_dh_emc scsi_dh_rdac scsi_dh_hp_sw scsi_dh 2014-06-24T20:08:36.058278+03:00 linux-jq6w kernel: [ 30.191004] CPU: 1 PID: 992 Comm: X Tainted: G C 3.15.1-2.g3289da4-desktop #1 2014-06-24T20:08:36.058281+03:00 linux-jq6w kernel: [ 30.191004] Hardware name: SAMSUNG ELECTRONICS CO., LTD. R520/R522/R620 /R520/R522/R620 , BIOS 04LL.M021.20090803.Jay 08/03/20 2014-06-24T20:08:36.058283+03:00 linux-jq6w kernel: [ 30.191004] task: ffff880138612210 ti: ffff8800b7524000 task.ti: ffff8800b7524000 2014-06-24T20:08:36.058285+03:00 linux-jq6w kernel: [ 30.191004] RIP: 0010: [<ffffffffa00a4ff4>] [<ffffffffa00a4ff4>] drm_crtc_helper_set_config+0x224/0xb00 [drm_kms_helper] 2014-06-24T20:08:36.058288+03:00 linux-jq6w kernel: [ 30.191004] RSP: 0018:ffff8800b7527c78 EFLAGS: 00010216 2014-06-24T20:08:36.058290+03:00 linux-jq6w kernel: [ 30.191004] RAX: ffff880036302800 RBX: ffff880036372000 RCX: 0000000000000000 2014-06-24T20:08:36.058293+03:00 linux-jq6w kernel: [ 30.191004] RDX: ffff880036304fe0 RSI: 0000000000000075 RDI: ffff880138a71350 2014-06-24T20:08:36.058295+03:00 linux-jq6w kernel: [ 30.191004] RBP: ffff880138a71000 R08: 0000000000000000 R09: ffff880036372000 2014-06-24T20:08:36.058297+03:00 linux-jq6w kernel: [ 30.191004] R10: 0000000000000500 R11: 0000000000000000 R12: ffff880036302800 2014-06-24T20:08:36.058299+03:00 linux-jq6w kernel: [ 30.191004] R13: ffff8800b74c0960 R14: ffff8800b7527d60 R15: ffff880138847000 2014-06-24T20:08:36.058302+03:00 linux-jq6w kernel: [ 30.191004] FS: 00007f07769cb980(0000) GS:ffff88013fd00000(0000) knlGS:0000000000000000 2014-06-24T20:08:36.058304+03:00 linux-jq6w kernel: [ 30.191004] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 2014-06-24T20:08:36.058306+03:00 linux-jq6w kernel: [ 30.191004] CR2: ffff880036305000 CR3: 00000000b7495000 CR4: 00000000000407e0 2014-06-24T20:08:36.058308+03:00 linux-jq6w kernel: [ 30.191004] Stack: 2014-06-24T20:08:36.058311+03:00 linux-jq6w kernel: [ 30.191004] ffff880138a712b0 ffff880138a71000 ffff880138a71350 ffff880138a712b0 2014-06-24T20:08:36.058313+03:00 linux-jq6w kernel: [ 30.191004] ffff8800b7527ca8 ffff880139a69098 ffff880139a69140 ffffffffa019dea0 2014-06-24T20:08:36.058315+03:00 linux-jq6w kernel: [ 30.191004] 0000000000000206 ffff880036157700 ffff8800b7527d60 ffff880138a71000 2014-06-24T20:08:36.058318+03:00 linux-jq6w kernel: [ 30.191004] Call Trace: 2014-06-24T20:08:36.058320+03:00 linux-jq6w kernel: [ 30.191004] [<ffffffffa00ed1ef>] radeon_crtc_set_config+0x3f/0x110 [radeon] 2014-06-24T20:08:36.058323+03:00 linux-jq6w kernel: [ 30.191004] [<ffffffffa0039c81>] drm_mode_set_config_internal+0x61/0xf0 [drm] 2014-06-24T20:08:36.058325+03:00 linux-jq6w kernel: [ 30.191004] [<ffffffffa003d19b>] drm_mode_setcrtc+0xcb/0x5b0 [drm] 2014-06-24T20:08:36.058327+03:00 linux-jq6w kernel: [ 30.191004] [<ffffffffa002e88b>] drm_ioctl+0x1fb/0x550 [drm] 2014-06-24T20:08:36.058329+03:00 linux-jq6w kernel: [ 30.191004] [<ffffffffa00c6046>] radeon_drm_ioctl+0x46/0x80 [radeon] 2014-06-24T20:08:36.058332+03:00 linux-jq6w kernel: [ 30.191004] [<ffffffff811bf6f7>] do_vfs_ioctl+0x2e7/0x4c0 2014-06-24T20:08:36.058334+03:00 linux-jq6w kernel: [ 30.191004] [<ffffffff811bf951>] SyS_ioctl+0x81/0xa0 2014-06-24T20:08:36.058337+03:00 linux-jq6w kernel: [ 30.191004] [<ffffffff81613c6d>] system_call_fastpath+0x1a/0x1f 2014-06-24T20:08:36.058339+03:00 linux-jq6w kernel: [ 30.191004] [<00007f0774b081e7>] 0x7f0774b081e6 2014-06-24T20:08:36.058341+03:00 linux-jq6w kernel: [ 30.191004] Code: 01 48 8d 14 4a 48 8b 08 49 8d 14 d4 48 89 0a 48 8b 48 08 48 89 4a 08 48 8b 48 10 48 89 4a 10 48 8b 48 18 48 89 4a 18 48 8b 48 20 <48> 89 4a 20 48 8b 48 28 48 89 4a 28 48 8b 48 30 48 89 4a 30 48 2014-06-24T20:08:36.058343+03:00 linux-jq6w kernel: [ 30.191004] RIP [<ffffffffa00a4ff4>] drm_crtc_helper_set_config+0x224/0xb00 [drm_kms_helper] 2014-06-24T20:08:36.058345+03:00 linux-jq6w kernel: [ 30.191004] RSP <ffff8800b7527c78> 2014-06-24T20:08:36.058347+03:00 linux-jq6w kernel: [ 30.191004] CR2: ffff880036305000 2014-06-24T20:08:36.058350+03:00 linux-jq6w kernel: [ 30.191004] BUG: unable to handle kernel NULL pointer dereference at 0000000000000260 2014-06-24T20:08:36.058352+03:00 linux-jq6w kernel: [ 30.191004] IP: [<ffffffff8160a989>] mutex_lock+0x9/0x22 2014-06-24T20:08:36.058354+03:00 linux-jq6w kernel: [ 30.191004] PGD b93c9067 PUD b7553067 PMD 0 2014-06-24T20:08:36.058356+03:00 linux-jq6w kernel: [ 30.191004] Oops: 0002 [#2] PREEMPT SMP 2014-06-24T20:08:36.058358+03:00 linux-jq6w kernel: [ 30.191004] Modules linked in: xt_pkttype xt_LOG xt_limit ip6t_REJECT xt_tcpudp nf_conntrack_ipv6 nf_defrag_ipv6 ip6table_raw ipt_REJECT iptable_raw xt_CT iptable_filter ip6table_mangle nf_conntrack_netbios_ns nf_conntrack_broadcast nf_conntrack_ipv4 nf_defrag_ipv4 ip_tables xt_conntrack nf_conntrack ip6table_filter ip6_tables x_tables snd_hda_codec_realtek snd_hda_codec_hdmi snd_hda_codec_generic snd_hda_intel snd_hda_controller snd_hda_codec snd_hwdep snd_pcm coretemp snd_seq snd_timer samsung_laptop snd_seq_device uvcvideo videobuf2_core videodev r8192e_pci(C) rtllib(C) lib80211 rtl8192se iTCO_wdt iTCO_vendor_support sr_mod rtl_pci serio_raw cdrom snd videobuf2_vmalloc rtlwifi pcspkr xpad mac80211 sky2 i2c_i801 cfg80211 videobuf2_memops rfkill joydev soundcore tpm_tis lpc_ich mfd_core ac battery button video tpm shpchp acpi_cpufreq sg dm_mod btrfs raid6_pq xor fan thermal radeon ttm drm_kms_helper processor drm i2c_algo_bit scsi_dh_alua scsi_dh_emc scsi_dh_rdac scsi_dh_hp_sw scsi_dh 2014-06-24T20:08:36.058361+03:00 linux-jq6w kernel: [ 30.191004] CPU: 1 PID: 992 Comm: X Tainted: G C 3.15.1-2.g3289da4-desktop #1 2014-06-24T20:08:36.058363+03:00 linux-jq6w kernel: [ 30.191004] Hardware name: SAMSUNG ELECTRONICS CO., LTD. R520/R522/R620 /R520/R522/R620 , BIOS 04LL.M021.20090803.Jay 08/03/20 2014-06-24T20:08:36.058366+03:00 linux-jq6w kernel: [ 30.191004] task: ffff880138612210 ti: ffff8800b7524000 task.ti: ffff8800b7524000 2014-06-24T20:08:36.058368+03:00 linux-jq6w kernel: [ 30.191004] RIP: 0010: [<ffffffff8160a989>] [<ffffffff8160a989>] mutex_lock+0x9/0x22 2014-06-24T20:08:36.058371+03:00 linux-jq6w kernel: [ 30.191004] RSP: 0018:ffff8800b75277c0 EFLAGS: 00010002 2014-06-24T20:08:36.058373+03:00 linux-jq6w kernel: [ 30.191004] RAX: ffffffffa00a7bd0 RBX: 0000000000000260 RCX: 00000000ffffffea 2014-06-24T20:08:36.058375+03:00 linux-jq6w kernel: [ 30.191004] RDX: 000000000000022a RSI: ffff880035caf800 RDI: 0000000000000260 2014-06-24T20:08:36.058377+03:00 linux-jq6w kernel: [ 30.191004] RBP: 0000000000000380 R08: 0000000000000300 R09: 0000000000000000 2014-06-24T20:08:36.058379+03:00 linux-jq6w kernel: [ 30.191004] R10: 0000000000000438 R11: 0000000000000300 R12: ffff880035caf800 2014-06-24T20:08:36.058381+03:00 linux-jq6w kernel: [ 30.191004] R13: 0000000000000000 R14: ffff880036301e38 R15: ffff880035caf860 2014-06-24T20:08:36.058384+03:00 linux-jq6w kernel: [ 30.191004] FS: 00007f07769cb980(0000) GS:ffff88013fd00000(0000) knlGS:0000000000000000 2014-06-24T20:08:36.058386+03:00 linux-jq6w kernel: [ 30.191004] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 2014-06-24T20:08:36.058388+03:00 linux-jq6w kernel: [ 30.191004] CR2: 0000000000000260 CR3: 00000000b7495000 CR4: 00000000000407e0 2014-06-24T20:08:36.058391+03:00 linux-jq6w kernel: [ 30.191004] Stack: 2014-06-24T20:08:36.058393+03:00 linux-jq6w kernel: [ 30.191004] ffff880035caf800 ffffffffa003936d ffff880035caf800 ffff880036302e00 2014-06-24T20:08:36.058395+03:00 linux-jq6w kernel: [ 30.191004] ffffffffa00a7bfa ffff880036301e00 ffff880035caf800 ffff880036301e38 2014-06-24T20:08:36.058397+03:00 linux-jq6w kernel: [ 30.191004] 0000000000000000 0000000000000000 ffff8801388f5800 ffffffff8136ffc1 2014-06-24T20:08:36.058399+03:00 linux-jq6w kernel: [ 30.191004] Call Trace: 2014-06-24T20:08:36.058402+03:00 linux-jq6w kernel: [ 30.191004] [<ffffffffa003936d>] drm_modeset_lock_all+0x1d/0x50 [drm] 2014-06-24T20:08:36.058404+03:00 linux-jq6w kernel: [ 30.191004] [<ffffffffa00a7bfa>] drm_fb_helper_pan_display+0x2a/0xe0 [drm_kms_helper] 2014-06-24T20:08:36.058406+03:00 linux-jq6w kernel: [ 30.191004] [<ffffffff8136ffc1>] fb_pan_display+0xb1/0x170 2014-06-24T20:08:36.058408+03:00 linux-jq6w kernel: [ 30.191004] [<ffffffff8136a7aa>] bit_update_start+0x1a/0x40 2014-06-24T20:08:36.058410+03:00 linux-jq6w kernel: [ 30.191004] [<ffffffff8136a27e>] fbcon_switch+0x37e/0x520 2014-06-24T20:08:36.058413+03:00 linux-jq6w kernel: [ 30.191004] [<ffffffff813dfc67>] redraw_screen+0x187/0x240 2014-06-24T20:08:36.058415+03:00 linux-jq6w kernel: [ 30.191004] [<ffffffff8136784a>] fbcon_blank+0x1ea/0x2a0 2014-06-24T20:08:36.058417+03:00 linux-jq6w kernel: [ 30.191004] [<ffffffff813e0721>] do_unblank_screen+0xa1/0x1b0 2014-06-24T20:08:36.058420+03:00 linux-jq6w kernel: [ 30.191004] [<ffffffff813169a5>] bust_spinlocks+0x15/0x30 2014-06-24T20:08:36.058422+03:00 linux-jq6w kernel: [ 30.191004] [<ffffffff8160d24f>] oops_end+0x2f/0xe0 2014-06-24T20:08:36.058424+03:00 linux-jq6w kernel: [ 30.191004] [<ffffffff81600188>] no_context+0x2b2/0x2be 2014-06-24T20:08:36.058427+03:00 linux-jq6w kernel: [ 30.191004] [<ffffffff8160f365>] __do_page_fault+0x85/0x540 2014-06-24T20:08:36.058429+03:00 linux-jq6w kernel: [ 30.191004] [<ffffffff8160c728>] page_fault+0x28/0x30 2014-06-24T20:08:36.058431+03:00 linux-jq6w kernel: [ 30.191004] [<ffffffffa00a4ff4>] drm_crtc_helper_set_config+0x224/0xb00 [drm_kms_helper] 2014-06-24T20:08:36.058433+03:00 linux-jq6w kernel: [ 30.191004] [<ffffffffa00ed1ef>] radeon_crtc_set_config+0x3f/0x110 [radeon] 2014-06-24T20:08:36.058436+03:00 linux-jq6w kernel: [ 30.191004] [<ffffffffa0039c81>] drm_mode_set_config_internal+0x61/0xf0 [drm] 2014-06-24T20:08:36.058438+03:00 linux-jq6w kernel: [ 30.191004] [<ffffffffa003d19b>] drm_mode_setcrtc+0xcb/0x5b0 [drm] 2014-06-24T20:08:36.058440+03:00 linux-jq6w kernel: [ 30.191004] [<ffffffffa002e88b>] drm_ioctl+0x1fb/0x550 [drm] 2014-06-24T20:08:36.058442+03:00 linux-jq6w kernel: [ 30.191004] [<ffffffffa00c6046>] radeon_drm_ioctl+0x46/0x80 [radeon] 2014-06-24T20:08:36.058445+03:00 linux-jq6w kernel: [ 30.191004] [<ffffffff811bf6f7>] do_vfs_ioctl+0x2e7/0x4c0 2014-06-24T20:08:36.058447+03:00 linux-jq6w kernel: [ 30.191004] [<ffffffff811bf951>] SyS_ioctl+0x81/0xa0 2014-06-24T20:08:36.058460+03:00 linux-jq6w kernel: [ 30.191004] [<ffffffff81613c6d>] system_call_fastpath+0x1a/0x1f 2014-06-24T20:08:36.058463+03:00 linux-jq6w kernel: [ 30.191004] [<00007f0774b081e7>] 0x7f0774b081e6 2014-06-24T20:08:36.058465+03:00 linux-jq6w kernel: [ 30.191004] Code: a9 ff 65 ff 0c 25 60 b9 00 00 74 be e9 3d ff ff ff 90 e8 8b e2 ff ff e9 84 fe ff ff 66 0f 1f 44 00 00 66 66 66 66 90 53 48 89 fb <f0> ff 0f 79 05 e8 ed fd ff ff 65 48 8b 04 25 80 b9 00 00 48 89 2014-06-24T20:08:36.058467+03:00 linux-jq6w kernel: [ 30.191004] RIP [<ffffffff8160a989>] mutex_lock+0x9/0x22 2014-06-24T20:08:36.058469+03:00 linux-jq6w kernel: [ 30.191004] RSP <ffff8800b75277c0> 2014-06-24T20:08:36.058472+03:00 linux-jq6w kernel: [ 30.191004] CR2: 0000000000000260 2014-06-24T20:08:36.058474+03:00 linux-jq6w kernel: [ 30.191004] ---[ end trace 1b8d66eeecaa3a02 ]--- Any help is much appreciated! Thank you -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-kernel+owner(a)opensuse.org

1 0

[opensuse-kernel] Factory kernel can't boot UEFI
by Stephan Kulow 24 Jun '14

24 Jun '14

Hi, We have a problem in openQA for Factory atm - we can't install on UEFI "machines" (I didn't try a real machine, but we run this setup in KVM for a while now. I tracked it here: https://bugzilla.novell.com/show_bug.cgi?id=882942 linking the problematic screenshot https://openqa.opensuse.org/tests/8391/modules/welcome/steps/1 I would welcome if someone could look at it, so we can have uefi back in the staging process. Greetings, Stephan -- Ma muaß weiterkämpfen, kämpfen bis zum Umfalln, a wenn die ganze Welt an Arsch offen hat, oder grad deswegn. -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-kernel+owner(a)opensuse.org

1 1