December 2013 - openSUSE Kernel - openSUSE Mailing Lists

[opensuse-kernel] kernel-default-base-2.6.29-5.2.x86_64 rpm errors
by Dave Plater 18 Jul '24

18 Jul '24

Hi, I'm busy updating to the latest factory kernel and have received the following errors from kernel-default-base installation (I did insert a blank dvd during the installation of the rpm by zypper):- WARNING: /lib/modules/2.6.29-rc8-5-default/kernel/drivers/scsi/sd_mod.ko needs unknown symbol crc_t10dif WARNING: /lib/modules/2.6.29-rc8-5-default/kernel/drivers/scsi/sr_mod.ko needs unknown symbol register_cdrom WARNING: /lib/modules/2.6.29-rc8-5-default/kernel/drivers/scsi/sr_mod.ko needs unknown symbol cdrom_ioctl WARNING: /lib/modules/2.6.29-rc8-5-default/kernel/drivers/scsi/sr_mod.ko needs unknown symbol cdrom_media_changed WARNING: /lib/modules/2.6.29-rc8-5-default/kernel/drivers/scsi/sr_mod.ko needs unknown symbol cdrom_get_media_event WARNING: /lib/modules/2.6.29-rc8-5-default/kernel/drivers/scsi/sr_mod.ko needs unknown symbol cdrom_release WARNING: /lib/modules/2.6.29-rc8-5-default/kernel/drivers/scsi/sr_mod.ko needs unknown symbol cdrom_open WARNING: /lib/modules/2.6.29-rc8-5-default/kernel/drivers/scsi/sr_mod.ko needs unknown symbol unregister_cdrom WARNING: /lib/modules/2.6.29-rc8-5-default/kernel/drivers/scsi/sr_mod.ko needs unknown symbol cdrom_number_of_slots And then these errors which I think IIRC happened before when the kernel was first split into three:- Kernel image: /boot/vmlinuz-2.6.29-rc8-5-default Initrd image: /boot/initrd-2.6.29-rc8-5-default Root device: /dev/disk/by-id/ata-WDC_WD800JB-00JJC0_WD-WMAM9RA78067-part3 (/dev/sda3) (mounted on / as xfs) Resume device: /dev/disk/by-id/ata-WDC_WD800JB-00JJC0_WD-WMAM9RA78067-part2 (/dev/sda2) FATAL: Module processor not found. WARNING: no dependencies for kernel module 'processor' found. FATAL: Module thermal not found. WARNING: no dependencies for kernel module 'thermal' found. FATAL: Module ata_generic not found. WARNING: no dependencies for kernel module 'ata_generic' found. FATAL: Module piix not found. WARNING: no dependencies for kernel module 'piix' found. FATAL: Module ide_pci_generic not found. WARNING: no dependencies for kernel module 'ide_pci_generic' found. FATAL: Module fan not found. WARNING: no dependencies for kernel module 'fan' found. FATAL: Module xfs not found. WARNING: no dependencies for kernel module 'xfs' found. FATAL: Module usbhid not found. WARNING: no dependencies for kernel module 'usbhid' found. Kernel Modules: scsi_mod libata ata_piix edd ahci sd_mod usbcore ohci-hcd ehci-hcd uhci-hcd WARNING: /dev/shm/mkinitramfs.0drQsZ/mnt/lib/modules/2.6.29-rc8-5-default/kernel/drivers/scsi/sd_mod.ko needs unknown symbol crc_t10dif Features: block usb resume.userspace resume.kernel Bootsplash: openSUSE (1280x1024) 22669 blocks Should I open a bug report about the errors which are possibly from inserting a dvd while the kernel rpm was installing? Regards Dave P -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-kernel+help(a)opensuse.org

2 2

[opensuse-kernel] Keep 3.11.y kernel for openSUSE 13.1 updates?
by Takashi Iwai 12 Sep '14

12 Sep '14

Hi, Since 3.11.y maintenance was discontinued by Greg, Ubuntu took over it. It made me wonder: are we willing to continue 3.11.y for openSUSE 13.1 updates, just relying on Ubuntu? Or, can we just move on 3.12.y? Takashi -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-kernel+owner(a)opensuse.org

27 80

[opensuse-kernel] Modular drivers which could be built-in
by Jean Delvare 10 Mar '14

10 Mar '14

Hi all, Having worked on built-in drivers which could be modularized, I am now looking for modular drivers which could be built-in. Our policy is that drivers which are not hardware-specific and are needed on a majority of systems should be built into the kernel directly. So I checked which modules were loaded on my 4 systems. After filtering out hardware-specific modules, I am left with the following list: ACPI and thermal drivers: * button * processor * thermal_sys Block device drivers * cdrom * scsi_dh * scsi_dh_alua * scsi_dh_emc * scsi_dh_hp_sw * scsi_dh_rdac * sg * sr_mod Graphics helper drivers * drm * drm_kms_helper * i2c_algo_bit Filesystem drivers: * fuse * lockd * sunrpc CPU drivers: * microcode Sound drivers: * pcspkr * snd * snd_page_alloc * snd_pcm * snd_seq * snd_seq_device * snd_timer * soundcore If anyone has an opinion on whether these should be built into the kernel or left as modules, this is the right time to discuss it. My personal thoughts, with mostly x86 in mind: * The ACPI button and processor drivers could be built-in. Most x86 systems use ACPI and they supposedly all have at least one processor and one power button ;) And thermal_sys is selected by processor. * While all my systems have an optical drive, I know they have disappeared from many systems, both very small and very large ones, so leaving cdrom and sr_mod as modules seems fine. * I have no idea why/how sg is being loaded, it has no modalias and no other module depend on it. But /dev/sd* nodes are created so it is certainly useful. Hannes? * No idea what the scsi_dh* modules are about either, no modalias and no dependencies either. Hannes? * With DRM/KMS being the norm now, I believe drm and drm_kms_helper could be built-in, even though the former is quite large. drm selects i2c-algo-bit, most (all?) DRM/KMS drivers use it. Even servers have graphics chips. * I suppose fuse is only used on desktop machines by default, for gvfs, so having it as a module seems OK. * lockd and sunrpc are dependencies of nfs and nfsd. I suppose there are many users out there who don't serve nor mount NFS shares so modules make sense. * I think microcode could be unloaded after use, maybe for security reasons it might even be preferable, or just because there is simply no point in keeping it in memory. Thomas? Either way we should keep it modular. * For sound drivers, Takashi should know better than me. I suppose that the rationale for having these modular is that servers have no sound chip? -- Jean Delvare Suse L3 -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-kernel+owner(a)opensuse.org

15 61

[opensuse-kernel] Opensuse 13.1 Xen guest OOPS @ "kernel BUG at .../kernel-xen-3.11.6/linux-3.11/mm/slab.c:3011!"
by ar16 17 Jan '14

17 Jan '14

I've installed Opensuse 13.1 as a Xen Guest at Linode.com. Booting via pvgrub to the Guest's opensuse kernel, kernel-xen-3.11.6-4.1.x86_64 I'm seeing intermittent Guest crashes. Seems to occur @/near ip(6)tables work ... but not reproducibly. on crash, @ the linode "lish" xen-console, I see: http://pastebin.com/1WPp01X4 which is, currently, limited only to 250 lines. Checking journalctl I see: http://pastebin.com/JjKQEevV Chatting @ linode IRC, I was pointed to this: Re: BUG: sleeping function called from invalid context at mm/slab.c:3060 https://lkml.org/lkml/2013/10/7/10 which similarly references BUG(a)/mm/slab.c as in my case. For reference, booting the Linode to their latest provided kernel ("Latest 64 bit (3.11.6-x86_64-linode35)"), instead, results in a stable environment; i.e., has yet to crash under any usage/load. (1) is this yet a known issue @ opensuse? (2) is it likely related to the lkml post? (3) what additional info, if any, is useful to troubleshoot? (4) does this belong @ -kernel or -virtual? -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-kernel+owner(a)opensuse.org

5 10

[opensuse-kernel] Kernel for ppc64le(not yet) and for OBS VM's
by Adrian Schröter 09 Jan '14

09 Jan '14

Hi, I have two commits in my git repo which I would like to get merged: https://github.com/adrianschroeter/kernel-source.git 1) A config for ppc64le. The kernel will still not compile due to code problems, but I like to get it merged anyway to show where we are with our ppc64le port. The standard kernel script tools did not work for me, but the kernel build in openSUSE:Factory:PowerLE project does accept at least the config. 2) A new spec file to repackage the kernel in a way that it will get picked up by OBS VM builders. We need this for a number of reasons: * ppc64 little endian switch on big endian hosts * build jobs which require further kernel modules will be able to load them now, since te code stream does match the running kernel (eg. kiwi using LVM tools) * QA checks depending on the kernel * validation of our kernels in general, the entire distro will use the the distro kernel during building. The reason why I want to have this spec file as part of the kernel package is that it should be also branched, when someone is branching any kernel-* package. OBS does create branches for all local linked packages, so the new and modified kernel will be used also directly in this project branching the kernel. To be discussed: shall we create the initrd in a way avoiding root permissions? On the other hand, we do test our default mkinitrd tool this way. It broke often enough in the past ... -- Adrian Schroeter email: adrian(a)suse.de SUSE LINUX GmbH, GF: Jeff Hawn, Jennifer Guild, Felix Imendörffer, HRB 21284 (AG Nürnberg) Maxfeldstraße 5 90409 Nürnberg Germany -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-kernel+owner(a)opensuse.org

3 19

[opensuse-kernel] sequence-patch: Add support for xz-compressed archives and patches
by Jean Delvare 07 Jan '14

07 Jan '14

Hi all, While kernel.org still offers bz2 archives for download, the discussion about dropping them and only leaving gz and xz is coming back every now and then. So I believe we should anticipate a future removal of bz2 archives and get our scripts ready to deal with xz-compressed archives now. If nothing else, that would encourage everyone to use xz-compressed archives whenever possible, which is a great saving of network bandwidth and storage space, plus decompression is twice as fast as with bz2. Thus I'd like to add support for xz-compressed files to sequence-patch for a starter. I'm attaching the patch. It's only tested locally (outside of the suse network) so not all code paths were tested. Some more testing and review would be welcome. We could also consider using xz to compress all tar files in tar-up.sh (and update the spec files accordingly.) This may make submission somewhat slower, as compressing with xz is significantly slower than with bzip2, but this would save some upload time, storage space in IBS/OBS and should also improve the build times by a small bit. -- Jean Delvare Suse L3 Support

2 8

[opensuse-kernel] Will the 13.1 kernel be updated soon?
by Larry Finger 25 Dec '13

25 Dec '13

Essentially every 13.1 user with an rt3290 wireless device is affected by https://bugzilla.kernel.org/show_bug.cgi?id=61621. The necessary patch has been applied to mainline and backported to stable kernels. I do not know what revision of 3.12 has the patch, but 3.11.8 contains it. Unfortunately, users of openSUSE 13.1 only get 3.11.6, which does not have the patch. If there is some major reason for not using 3.11.8, would it be possible to cherry pick the patch. The mainline commit is dfb6b7c109a7f98d324a759599d1b4616f02c79f Author: Stanislaw Gruszka <sgruszka(a)redhat.com> Date: Mon Sep 23 04:08:13 2013 +0200 This issue was reported by two different users today in the Forums. Thanks, Larry -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-kernel+owner(a)opensuse.org

3 2

[opensuse-kernel] [PATCH] Add support for m68k
by Andreas Schwab 19 Dec '13

19 Dec '13

This adds basic support for building a kernel for m68k. Andreas. --- rpm/arch-symbols | 2 +- rpm/group-source-files.pl | 1 + rpm/kernel-binary.spec.in | 6 ++++++ 3 files changed, 8 insertions(+), 1 deletion(-) diff --git a/rpm/arch-symbols b/rpm/arch-symbols index 223d329..4f110dd 100755 --- a/rpm/arch-symbols +++ b/rpm/arch-symbols @@ -25,7 +25,7 @@ if [ "$1" = "--list" ]; then # List all known architectures - echo i386 mips{,64} sparc{,64} ppc{,64} s390{,x} ia64 x86_64 alpha parisc armv6hl armv7hl arm64 + echo i386 mips{,64} sparc{,64} ppc{,64} s390{,x} ia64 x86_64 alpha parisc armv6hl armv7hl arm64 m68k exit 0 fi diff --git a/rpm/group-source-files.pl b/rpm/group-source-files.pl index 06e436a..bafe3be 100755 --- a/rpm/group-source-files.pl +++ b/rpm/group-source-files.pl @@ -36,6 +36,7 @@ sub scan m{^\Q$loc\E.*/Makefile} || m{^\Q$loc\E/arch/[^/]+/boot/dts/include/dt-bindings\b} || m{^\Q$loc\E/arch/[^/]+/include\b} || + m{^\Q$loc\E/arch/[^/]+/module\.lds\b} || m{^\Q$loc\E/arch/arm/[^/]+/include/mach\b} || m{^\Q$loc\E/arch/arm/[^/]+/include/plat\b} || m{^\Q$loc\E/include/[^/]+\b} || diff --git a/rpm/kernel-binary.spec.in b/rpm/kernel-binary.spec.in index 6492ceb..def3042 100644 --- a/rpm/kernel-binary.spec.in +++ b/rpm/kernel-binary.spec.in @@ -509,6 +509,12 @@ add_vmlinux() image=Image cp -p arch/arm64/boot/$image %buildroot/boot/$image-%kernelrelease-%build_flavor %endif +%ifarch m68k + add_vmlinux --compressed + mv %buildroot/boot/vmlinux-%kernelrelease-%build_flavor.gz \ + %buildroot/boot/vmlinuz-%kernelrelease-%build_flavor + image=vmlinuz +%endif # end of build_kdump %endif -- 1.8.5.1 -- Andreas Schwab, SUSE Labs, schwab(a)suse.de GPG Key fingerprint = 0196 BAD8 1CE9 1970 F4BE 1748 E4D4 88E3 0EEA B9D7 "And now for something completely different." -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-kernel+owner(a)opensuse.org

1 0

[opensuse-kernel] CONFIG_CC_STACKPROTECTOR
by richard -rw- weinberger 14 Dec '13

14 Dec '13

Hi! I'm wondering why CONFIG_CC_STACKPROTECTOR is disabled on openSUSE. Debian and Fedora seem to enabled it per default. What's the deal? -- Thanks, //richard -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-kernel+owner(a)opensuse.org

7 17

[opensuse-kernel] [PATCH] config: set CONFIG_X86_INTEL_LPSS and CONFIG_I2C_DESIGNWARE_PLATFORM
by Stefan Brüns 13 Dec '13

13 Dec '13

Enable INTEL LPSS (Low Power SubSystem) for LynxPoint chipsets (bnc#849125) and DesignWare (platform) i2c bus driver (bnc#849338). The DesignWare i2c driver depends on the clock subsystem. Signed-off-by: Stefan Brüns <stefan.bruens(a)rwth-aachen.de> --- config/i386/debug | 33 ++++++++++++++++++++++++++++++++- config/i386/default | 33 ++++++++++++++++++++++++++++++++- config/i386/desktop | 33 ++++++++++++++++++++++++++++++++- config/i386/pae | 33 ++++++++++++++++++++++++++++++++- config/x86_64/debug | 33 ++++++++++++++++++++++++++++++++- config/x86_64/default | 33 ++++++++++++++++++++++++++++++++- config/x86_64/desktop | 33 ++++++++++++++++++++++++++++++++- 7 files changed, 224 insertions(+), 7 deletions(-) diff --git a/config/i386/debug b/config/i386/debug index 2959e5f..c37def7 100644 --- a/config/i386/debug +++ b/config/i386/debug @@ -243,6 +243,7 @@ CONFIG_HAVE_DMA_ATTRS=y CONFIG_HAVE_DMA_CONTIGUOUS=y CONFIG_GENERIC_SMP_IDLE_THREAD=y CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y +CONFIG_HAVE_CLK=y CONFIG_HAVE_DMA_API_DEBUG=y CONFIG_HAVE_HW_BREAKPOINT=y CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y @@ -342,7 +343,7 @@ CONFIG_X86_BIGSMP=y CONFIG_X86_EXTENDED_PLATFORM=y # CONFIG_X86_GOLDFISH is not set # CONFIG_X86_WANT_INTEL_MID is not set -# CONFIG_X86_INTEL_LPSS is not set +CONFIG_X86_INTEL_LPSS=y # CONFIG_X86_RDC321X is not set CONFIG_X86_32_NON_STANDARD=y # CONFIG_X86_NUMAQ is not set @@ -562,6 +563,7 @@ CONFIG_DPM_WATCHDOG=y CONFIG_DPM_WATCHDOG_TIMEOUT=12 CONFIG_PM_TRACE=y CONFIG_PM_TRACE_RTC=y +CONFIG_PM_CLK=y # CONFIG_WQ_POWER_EFFICIENT_DEFAULT is not set CONFIG_ACPI=y CONFIG_ACPI_SLEEP=y @@ -1785,6 +1787,7 @@ CONFIG_BLK_DEV_RSXX=m CONFIG_SENSORS_LIS3LV02D=m CONFIG_AD525X_DPOT=m CONFIG_AD525X_DPOT_I2C=m +# CONFIG_ATMEL_PWM is not set CONFIG_DUMMY_IRQ=m CONFIG_IBM_ASM=m CONFIG_PHANTOM=m @@ -3027,6 +3030,7 @@ CONFIG_KEYBOARD_MCS=m CONFIG_KEYBOARD_MPR121=m CONFIG_KEYBOARD_NEWTON=m CONFIG_KEYBOARD_OPENCORES=m +# CONFIG_KEYBOARD_SAMSUNG is not set # CONFIG_KEYBOARD_STOWAWAY is not set CONFIG_KEYBOARD_SUNKBD=m CONFIG_KEYBOARD_XTKBD=m @@ -3151,6 +3155,7 @@ CONFIG_TOUCHSCREEN_USB_EASYTOUCH=y CONFIG_TOUCHSCREEN_TOUCHIT213=m CONFIG_TOUCHSCREEN_TSC_SERIO=m CONFIG_TOUCHSCREEN_TSC2007=m +# CONFIG_TOUCHSCREEN_W90X900 is not set CONFIG_TOUCHSCREEN_ST1232=m CONFIG_TOUCHSCREEN_SUR40=m CONFIG_TOUCHSCREEN_TPS6507X=m @@ -3290,8 +3295,10 @@ CONFIG_HW_RANDOM_TIMERIOMEM=m CONFIG_HW_RANDOM_INTEL=m CONFIG_HW_RANDOM_AMD=m CONFIG_HW_RANDOM_GEODE=m +# CONFIG_HW_RANDOM_ATMEL is not set CONFIG_HW_RANDOM_VIA=m CONFIG_HW_RANDOM_VIRTIO=m +# CONFIG_HW_RANDOM_EXYNOS is not set CONFIG_HW_RANDOM_TPM=m CONFIG_NVRAM=y CONFIG_DTLK=m @@ -3340,6 +3347,7 @@ CONFIG_I2C_MUX=m CONFIG_I2C_MUX_GPIO=m CONFIG_I2C_MUX_PCA9541=m CONFIG_I2C_MUX_PCA954x=m +# CONFIG_I2C_MUX_PINCTRL is not set CONFIG_I2C_HELPER_AUTO=y CONFIG_I2C_SMBUS=m CONFIG_I2C_ALGOBIT=m @@ -3380,6 +3388,7 @@ CONFIG_I2C_SCMI=m # CONFIG_I2C_CBUS_GPIO=m CONFIG_I2C_DESIGNWARE_CORE=m +CONFIG_I2C_DESIGNWARE_PLATFORM=m CONFIG_I2C_DESIGNWARE_PCI=m CONFIG_I2C_EG20T=m CONFIG_I2C_GPIO=m @@ -3448,6 +3457,15 @@ CONFIG_PTP_1588_CLOCK=m # Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks. # CONFIG_PTP_1588_CLOCK_PCH=m +CONFIG_PINCTRL=y + +# +# Pin controllers +# +# CONFIG_PINMUX is not set +# CONFIG_PINCONF is not set +# CONFIG_DEBUG_PINCTRL is not set +# CONFIG_PINCTRL_BAYTRAIL is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y CONFIG_GPIOLIB=y CONFIG_GPIO_DEVRES=y @@ -4142,6 +4160,8 @@ CONFIG_SOC_CAMERA=m CONFIG_SOC_CAMERA_SCALE_CROP=m CONFIG_SOC_CAMERA_PLATFORM=m CONFIG_VIDEO_RCAR_VIN=m +# CONFIG_VIDEO_SH_MOBILE_CSI2 is not set +# CONFIG_VIDEO_SH_MOBILE_CEU is not set CONFIG_V4L_MEM2MEM_DRIVERS=y CONFIG_VIDEO_MEM2MEM_DEINTERLACE=m # CONFIG_VIDEO_SH_VEU is not set @@ -5209,6 +5229,8 @@ CONFIG_MMC_SDHCI_PCI=m CONFIG_MMC_RICOH_MMC=y CONFIG_MMC_SDHCI_ACPI=m CONFIG_MMC_SDHCI_PLTFM=m +# CONFIG_MMC_SDHCI_PXAV3 is not set +# CONFIG_MMC_SDHCI_PXAV2 is not set CONFIG_MMC_WBSD=m CONFIG_MMC_TIFM_SD=m CONFIG_MMC_SDRICOH_CS=m @@ -5647,6 +5669,15 @@ CONFIG_INTEL_SMARTCONNECT=m CONFIG_PVPANIC=m CONFIG_CHROME_PLATFORMS=y CONFIG_CHROMEOS_LAPTOP=m +CONFIG_CLKDEV_LOOKUP=y +CONFIG_HAVE_CLK_PREPARE=y +CONFIG_COMMON_CLK=y + +# +# Common Clock Framework +# +# CONFIG_COMMON_CLK_DEBUG is not set +# CONFIG_COMMON_CLK_SI5351 is not set # # Hardware Spinlock drivers diff --git a/config/i386/default b/config/i386/default index edf2e94..9ae694d 100644 --- a/config/i386/default +++ b/config/i386/default @@ -240,6 +240,7 @@ CONFIG_HAVE_DMA_ATTRS=y CONFIG_HAVE_DMA_CONTIGUOUS=y CONFIG_GENERIC_SMP_IDLE_THREAD=y CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y +CONFIG_HAVE_CLK=y CONFIG_HAVE_DMA_API_DEBUG=y CONFIG_HAVE_HW_BREAKPOINT=y CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y @@ -344,7 +345,7 @@ CONFIG_X86_BIGSMP=y CONFIG_X86_EXTENDED_PLATFORM=y # CONFIG_X86_GOLDFISH is not set # CONFIG_X86_WANT_INTEL_MID is not set -# CONFIG_X86_INTEL_LPSS is not set +CONFIG_X86_INTEL_LPSS=y # CONFIG_X86_RDC321X is not set CONFIG_X86_32_NON_STANDARD=y # CONFIG_X86_NUMAQ is not set @@ -548,6 +549,7 @@ CONFIG_DPM_WATCHDOG=y CONFIG_DPM_WATCHDOG_TIMEOUT=12 CONFIG_PM_TRACE=y CONFIG_PM_TRACE_RTC=y +CONFIG_PM_CLK=y # CONFIG_WQ_POWER_EFFICIENT_DEFAULT is not set CONFIG_ACPI=y CONFIG_ACPI_SLEEP=y @@ -1779,6 +1781,7 @@ CONFIG_BLK_DEV_RSXX=m CONFIG_SENSORS_LIS3LV02D=m CONFIG_AD525X_DPOT=m CONFIG_AD525X_DPOT_I2C=m +# CONFIG_ATMEL_PWM is not set CONFIG_DUMMY_IRQ=m CONFIG_IBM_ASM=m CONFIG_PHANTOM=m @@ -3024,6 +3027,7 @@ CONFIG_KEYBOARD_MCS=m CONFIG_KEYBOARD_MPR121=m CONFIG_KEYBOARD_NEWTON=m CONFIG_KEYBOARD_OPENCORES=m +# CONFIG_KEYBOARD_SAMSUNG is not set # CONFIG_KEYBOARD_STOWAWAY is not set CONFIG_KEYBOARD_SUNKBD=m CONFIG_KEYBOARD_XTKBD=m @@ -3150,6 +3154,7 @@ CONFIG_TOUCHSCREEN_USB_EASYTOUCH=y CONFIG_TOUCHSCREEN_TOUCHIT213=m CONFIG_TOUCHSCREEN_TSC_SERIO=m CONFIG_TOUCHSCREEN_TSC2007=m +# CONFIG_TOUCHSCREEN_W90X900 is not set CONFIG_TOUCHSCREEN_ST1232=m CONFIG_TOUCHSCREEN_SUR40=m CONFIG_TOUCHSCREEN_TPS6507X=m @@ -3293,8 +3298,10 @@ CONFIG_HW_RANDOM_TIMERIOMEM=m CONFIG_HW_RANDOM_INTEL=m CONFIG_HW_RANDOM_AMD=m CONFIG_HW_RANDOM_GEODE=m +# CONFIG_HW_RANDOM_ATMEL is not set CONFIG_HW_RANDOM_VIA=m CONFIG_HW_RANDOM_VIRTIO=m +# CONFIG_HW_RANDOM_EXYNOS is not set CONFIG_HW_RANDOM_TPM=m CONFIG_NVRAM=y CONFIG_DTLK=m @@ -3344,6 +3351,7 @@ CONFIG_I2C_ARB_GPIO_CHALLENGE=m CONFIG_I2C_MUX_GPIO=m CONFIG_I2C_MUX_PCA9541=m CONFIG_I2C_MUX_PCA954x=m +# CONFIG_I2C_MUX_PINCTRL is not set CONFIG_I2C_HELPER_AUTO=y CONFIG_I2C_SMBUS=m CONFIG_I2C_ALGOBIT=m @@ -3384,6 +3392,7 @@ CONFIG_I2C_SCMI=m # CONFIG_I2C_CBUS_GPIO=m CONFIG_I2C_DESIGNWARE_CORE=m +CONFIG_I2C_DESIGNWARE_PLATFORM=m CONFIG_I2C_DESIGNWARE_PCI=m CONFIG_I2C_EG20T=m CONFIG_I2C_GPIO=m @@ -3453,6 +3462,15 @@ CONFIG_PTP_1588_CLOCK=m # Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks. # CONFIG_PTP_1588_CLOCK_PCH=m +CONFIG_PINCTRL=y + +# +# Pin controllers +# +# CONFIG_PINMUX is not set +# CONFIG_PINCONF is not set +# CONFIG_DEBUG_PINCTRL is not set +# CONFIG_PINCTRL_BAYTRAIL is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y CONFIG_GPIOLIB=y CONFIG_GPIO_DEVRES=y @@ -4154,6 +4172,8 @@ CONFIG_SOC_CAMERA=m CONFIG_SOC_CAMERA_SCALE_CROP=m CONFIG_SOC_CAMERA_PLATFORM=m CONFIG_VIDEO_RCAR_VIN=m +# CONFIG_VIDEO_SH_MOBILE_CSI2 is not set +# CONFIG_VIDEO_SH_MOBILE_CEU is not set CONFIG_V4L_MEM2MEM_DRIVERS=y CONFIG_VIDEO_MEM2MEM_DEINTERLACE=m # CONFIG_VIDEO_SH_VEU is not set @@ -5222,6 +5242,8 @@ CONFIG_MMC_SDHCI_PCI=m CONFIG_MMC_RICOH_MMC=y CONFIG_MMC_SDHCI_ACPI=m CONFIG_MMC_SDHCI_PLTFM=m +# CONFIG_MMC_SDHCI_PXAV3 is not set +# CONFIG_MMC_SDHCI_PXAV2 is not set CONFIG_MMC_WBSD=m CONFIG_MMC_TIFM_SD=m CONFIG_MMC_SDRICOH_CS=m @@ -5667,6 +5689,15 @@ CONFIG_INTEL_SMARTCONNECT=m CONFIG_PVPANIC=m CONFIG_CHROME_PLATFORMS=y CONFIG_CHROMEOS_LAPTOP=m +CONFIG_CLKDEV_LOOKUP=y +CONFIG_HAVE_CLK_PREPARE=y +CONFIG_COMMON_CLK=y + +# +# Common Clock Framework +# +# CONFIG_COMMON_CLK_DEBUG is not set +# CONFIG_COMMON_CLK_SI5351 is not set # # Hardware Spinlock drivers diff --git a/config/i386/desktop b/config/i386/desktop index 3a90d70..75d78b9 100644 --- a/config/i386/desktop +++ b/config/i386/desktop @@ -245,6 +245,7 @@ CONFIG_HAVE_DMA_ATTRS=y CONFIG_HAVE_DMA_CONTIGUOUS=y CONFIG_GENERIC_SMP_IDLE_THREAD=y CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y +CONFIG_HAVE_CLK=y CONFIG_HAVE_DMA_API_DEBUG=y CONFIG_HAVE_HW_BREAKPOINT=y CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y @@ -345,7 +346,7 @@ CONFIG_X86_BIGSMP=y CONFIG_X86_EXTENDED_PLATFORM=y # CONFIG_X86_GOLDFISH is not set # CONFIG_X86_WANT_INTEL_MID is not set -# CONFIG_X86_INTEL_LPSS is not set +CONFIG_X86_INTEL_LPSS=y # CONFIG_X86_RDC321X is not set CONFIG_X86_32_NON_STANDARD=y # CONFIG_X86_NUMAQ is not set @@ -566,6 +567,7 @@ CONFIG_DPM_WATCHDOG=y CONFIG_DPM_WATCHDOG_TIMEOUT=12 CONFIG_PM_TRACE=y CONFIG_PM_TRACE_RTC=y +CONFIG_PM_CLK=y # CONFIG_WQ_POWER_EFFICIENT_DEFAULT is not set CONFIG_ACPI=y CONFIG_ACPI_SLEEP=y @@ -1763,6 +1765,7 @@ CONFIG_BLK_DEV_RSXX=m CONFIG_SENSORS_LIS3LV02D=m CONFIG_AD525X_DPOT=m CONFIG_AD525X_DPOT_I2C=m +# CONFIG_ATMEL_PWM is not set CONFIG_DUMMY_IRQ=m CONFIG_IBM_ASM=m CONFIG_PHANTOM=m @@ -2951,6 +2954,7 @@ CONFIG_KEYBOARD_MCS=m CONFIG_KEYBOARD_MPR121=m CONFIG_KEYBOARD_NEWTON=m CONFIG_KEYBOARD_OPENCORES=m +# CONFIG_KEYBOARD_SAMSUNG is not set # CONFIG_KEYBOARD_STOWAWAY is not set CONFIG_KEYBOARD_SUNKBD=m CONFIG_KEYBOARD_XTKBD=m @@ -3070,6 +3074,7 @@ CONFIG_TOUCHSCREEN_USB_EASYTOUCH=y CONFIG_TOUCHSCREEN_TOUCHIT213=m CONFIG_TOUCHSCREEN_TSC_SERIO=m CONFIG_TOUCHSCREEN_TSC2007=m +# CONFIG_TOUCHSCREEN_W90X900 is not set CONFIG_TOUCHSCREEN_ST1232=m CONFIG_TOUCHSCREEN_SUR40=m CONFIG_TOUCHSCREEN_TPS6507X=m @@ -3210,8 +3215,10 @@ CONFIG_HW_RANDOM_TIMERIOMEM=m CONFIG_HW_RANDOM_INTEL=m CONFIG_HW_RANDOM_AMD=m CONFIG_HW_RANDOM_GEODE=m +# CONFIG_HW_RANDOM_ATMEL is not set CONFIG_HW_RANDOM_VIA=m CONFIG_HW_RANDOM_VIRTIO=m +# CONFIG_HW_RANDOM_EXYNOS is not set CONFIG_HW_RANDOM_TPM=m CONFIG_NVRAM=y CONFIG_R3964=m @@ -3259,6 +3266,7 @@ CONFIG_I2C_MUX=m CONFIG_I2C_MUX_GPIO=m CONFIG_I2C_MUX_PCA9541=m CONFIG_I2C_MUX_PCA954x=m +# CONFIG_I2C_MUX_PINCTRL is not set CONFIG_I2C_HELPER_AUTO=y CONFIG_I2C_SMBUS=m CONFIG_I2C_ALGOBIT=m @@ -3299,6 +3307,7 @@ CONFIG_I2C_SCMI=m # CONFIG_I2C_CBUS_GPIO=m CONFIG_I2C_DESIGNWARE_CORE=m +CONFIG_I2C_DESIGNWARE_PLATFORM=m CONFIG_I2C_DESIGNWARE_PCI=m CONFIG_I2C_EG20T=m CONFIG_I2C_GPIO=m @@ -3366,6 +3375,15 @@ CONFIG_PTP_1588_CLOCK=m # Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks. # CONFIG_PTP_1588_CLOCK_PCH=m +CONFIG_PINCTRL=y + +# +# Pin controllers +# +# CONFIG_PINMUX is not set +# CONFIG_PINCONF is not set +# CONFIG_DEBUG_PINCTRL is not set +# CONFIG_PINCTRL_BAYTRAIL is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y CONFIG_GPIOLIB=y CONFIG_GPIO_DEVRES=y @@ -4089,6 +4107,8 @@ CONFIG_SOC_CAMERA=m CONFIG_SOC_CAMERA_SCALE_CROP=m CONFIG_SOC_CAMERA_PLATFORM=m CONFIG_VIDEO_RCAR_VIN=m +# CONFIG_VIDEO_SH_MOBILE_CSI2 is not set +# CONFIG_VIDEO_SH_MOBILE_CEU is not set CONFIG_V4L_MEM2MEM_DRIVERS=y CONFIG_VIDEO_MEM2MEM_DEINTERLACE=m # CONFIG_VIDEO_SH_VEU is not set @@ -5090,6 +5110,8 @@ CONFIG_MMC_SDHCI_PCI=m CONFIG_MMC_RICOH_MMC=y CONFIG_MMC_SDHCI_ACPI=m CONFIG_MMC_SDHCI_PLTFM=m +# CONFIG_MMC_SDHCI_PXAV3 is not set +# CONFIG_MMC_SDHCI_PXAV2 is not set CONFIG_MMC_WBSD=m CONFIG_MMC_TIFM_SD=m CONFIG_MMC_SDRICOH_CS=m @@ -5526,6 +5548,15 @@ CONFIG_INTEL_SMARTCONNECT=m CONFIG_PVPANIC=m CONFIG_CHROME_PLATFORMS=y CONFIG_CHROMEOS_LAPTOP=m +CONFIG_CLKDEV_LOOKUP=y +CONFIG_HAVE_CLK_PREPARE=y +CONFIG_COMMON_CLK=y + +# +# Common Clock Framework +# +# CONFIG_COMMON_CLK_DEBUG is not set +# CONFIG_COMMON_CLK_SI5351 is not set # # Hardware Spinlock drivers diff --git a/config/i386/pae b/config/i386/pae index beee62e..5a51d04 100644 --- a/config/i386/pae +++ b/config/i386/pae @@ -243,6 +243,7 @@ CONFIG_HAVE_DMA_ATTRS=y CONFIG_HAVE_DMA_CONTIGUOUS=y CONFIG_GENERIC_SMP_IDLE_THREAD=y CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y +CONFIG_HAVE_CLK=y CONFIG_HAVE_DMA_API_DEBUG=y CONFIG_HAVE_HW_BREAKPOINT=y CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y @@ -347,7 +348,7 @@ CONFIG_X86_BIGSMP=y CONFIG_X86_EXTENDED_PLATFORM=y # CONFIG_X86_GOLDFISH is not set # CONFIG_X86_WANT_INTEL_MID is not set -# CONFIG_X86_INTEL_LPSS is not set +CONFIG_X86_INTEL_LPSS=y # CONFIG_X86_RDC321X is not set CONFIG_X86_32_NON_STANDARD=y # CONFIG_X86_NUMAQ is not set @@ -567,6 +568,7 @@ CONFIG_DPM_WATCHDOG=y CONFIG_DPM_WATCHDOG_TIMEOUT=12 CONFIG_PM_TRACE=y CONFIG_PM_TRACE_RTC=y +CONFIG_PM_CLK=y # CONFIG_WQ_POWER_EFFICIENT_DEFAULT is not set CONFIG_ACPI=y CONFIG_ACPI_SLEEP=y @@ -1764,6 +1766,7 @@ CONFIG_BLK_DEV_RSXX=m CONFIG_SENSORS_LIS3LV02D=m CONFIG_AD525X_DPOT=m CONFIG_AD525X_DPOT_I2C=m +# CONFIG_ATMEL_PWM is not set CONFIG_DUMMY_IRQ=m CONFIG_IBM_ASM=m CONFIG_PHANTOM=m @@ -2952,6 +2955,7 @@ CONFIG_KEYBOARD_MCS=m CONFIG_KEYBOARD_MPR121=m CONFIG_KEYBOARD_NEWTON=m CONFIG_KEYBOARD_OPENCORES=m +# CONFIG_KEYBOARD_SAMSUNG is not set # CONFIG_KEYBOARD_STOWAWAY is not set CONFIG_KEYBOARD_SUNKBD=m CONFIG_KEYBOARD_XTKBD=m @@ -3071,6 +3075,7 @@ CONFIG_TOUCHSCREEN_USB_EASYTOUCH=y CONFIG_TOUCHSCREEN_TOUCHIT213=m CONFIG_TOUCHSCREEN_TSC_SERIO=m CONFIG_TOUCHSCREEN_TSC2007=m +# CONFIG_TOUCHSCREEN_W90X900 is not set CONFIG_TOUCHSCREEN_ST1232=m CONFIG_TOUCHSCREEN_SUR40=m CONFIG_TOUCHSCREEN_TPS6507X=m @@ -3211,8 +3216,10 @@ CONFIG_HW_RANDOM_TIMERIOMEM=m CONFIG_HW_RANDOM_INTEL=m CONFIG_HW_RANDOM_AMD=m CONFIG_HW_RANDOM_GEODE=m +# CONFIG_HW_RANDOM_ATMEL is not set CONFIG_HW_RANDOM_VIA=m CONFIG_HW_RANDOM_VIRTIO=m +# CONFIG_HW_RANDOM_EXYNOS is not set CONFIG_HW_RANDOM_TPM=m CONFIG_NVRAM=y CONFIG_R3964=m @@ -3260,6 +3267,7 @@ CONFIG_I2C_MUX=m CONFIG_I2C_MUX_GPIO=m CONFIG_I2C_MUX_PCA9541=m CONFIG_I2C_MUX_PCA954x=m +# CONFIG_I2C_MUX_PINCTRL is not set CONFIG_I2C_HELPER_AUTO=y CONFIG_I2C_SMBUS=m CONFIG_I2C_ALGOBIT=m @@ -3300,6 +3308,7 @@ CONFIG_I2C_SCMI=m # CONFIG_I2C_CBUS_GPIO=m CONFIG_I2C_DESIGNWARE_CORE=m +CONFIG_I2C_DESIGNWARE_PLATFORM=m CONFIG_I2C_DESIGNWARE_PCI=m CONFIG_I2C_EG20T=m CONFIG_I2C_GPIO=m @@ -3367,6 +3376,15 @@ CONFIG_PTP_1588_CLOCK=m # Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks. # CONFIG_PTP_1588_CLOCK_PCH=m +CONFIG_PINCTRL=y + +# +# Pin controllers +# +# CONFIG_PINMUX is not set +# CONFIG_PINCONF is not set +# CONFIG_DEBUG_PINCTRL is not set +# CONFIG_PINCTRL_BAYTRAIL is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y CONFIG_GPIOLIB=y CONFIG_GPIO_DEVRES=y @@ -4090,6 +4108,8 @@ CONFIG_SOC_CAMERA=m CONFIG_SOC_CAMERA_SCALE_CROP=m CONFIG_SOC_CAMERA_PLATFORM=m CONFIG_VIDEO_RCAR_VIN=m +# CONFIG_VIDEO_SH_MOBILE_CSI2 is not set +# CONFIG_VIDEO_SH_MOBILE_CEU is not set CONFIG_V4L_MEM2MEM_DRIVERS=y CONFIG_VIDEO_MEM2MEM_DEINTERLACE=m # CONFIG_VIDEO_SH_VEU is not set @@ -5099,6 +5119,8 @@ CONFIG_MMC_SDHCI_PCI=m CONFIG_MMC_RICOH_MMC=y CONFIG_MMC_SDHCI_ACPI=m CONFIG_MMC_SDHCI_PLTFM=m +# CONFIG_MMC_SDHCI_PXAV3 is not set +# CONFIG_MMC_SDHCI_PXAV2 is not set CONFIG_MMC_WBSD=m CONFIG_MMC_TIFM_SD=m CONFIG_MMC_SDRICOH_CS=m @@ -5535,6 +5557,15 @@ CONFIG_INTEL_SMARTCONNECT=m CONFIG_PVPANIC=m CONFIG_CHROME_PLATFORMS=y CONFIG_CHROMEOS_LAPTOP=m +CONFIG_CLKDEV_LOOKUP=y +CONFIG_HAVE_CLK_PREPARE=y +CONFIG_COMMON_CLK=y + +# +# Common Clock Framework +# +# CONFIG_COMMON_CLK_DEBUG is not set +# CONFIG_COMMON_CLK_SI5351 is not set # # Hardware Spinlock drivers diff --git a/config/x86_64/debug b/config/x86_64/debug index 729e7ad..f464413 100644 --- a/config/x86_64/debug +++ b/config/x86_64/debug @@ -250,6 +250,7 @@ CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_DMA_ATTRS=y CONFIG_GENERIC_SMP_IDLE_THREAD=y CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y +CONFIG_HAVE_CLK=y CONFIG_HAVE_DMA_API_DEBUG=y CONFIG_HAVE_HW_BREAKPOINT=y CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y @@ -353,7 +354,7 @@ CONFIG_X86_EXTENDED_PLATFORM=y # CONFIG_X86_NUMACHIP is not set # CONFIG_X86_VSMP is not set CONFIG_X86_UV=y -# CONFIG_X86_INTEL_LPSS is not set +CONFIG_X86_INTEL_LPSS=y CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y CONFIG_HYPERVISOR_GUEST=y CONFIG_PARAVIRT=y @@ -538,6 +539,7 @@ CONFIG_DPM_WATCHDOG=y CONFIG_DPM_WATCHDOG_TIMEOUT=12 CONFIG_PM_TRACE=y CONFIG_PM_TRACE_RTC=y +CONFIG_PM_CLK=y # CONFIG_WQ_POWER_EFFICIENT_DEFAULT is not set CONFIG_ACPI=y CONFIG_ACPI_SLEEP=y @@ -1730,6 +1732,7 @@ CONFIG_BLK_DEV_RSXX=m CONFIG_SENSORS_LIS3LV02D=m CONFIG_AD525X_DPOT=m CONFIG_AD525X_DPOT_I2C=m +# CONFIG_ATMEL_PWM is not set CONFIG_DUMMY_IRQ=m CONFIG_IBM_ASM=m CONFIG_PHANTOM=m @@ -2920,6 +2923,7 @@ CONFIG_KEYBOARD_MCS=m CONFIG_KEYBOARD_MPR121=m CONFIG_KEYBOARD_NEWTON=m CONFIG_KEYBOARD_OPENCORES=m +# CONFIG_KEYBOARD_SAMSUNG is not set # CONFIG_KEYBOARD_STOWAWAY is not set CONFIG_KEYBOARD_SUNKBD=m CONFIG_KEYBOARD_XTKBD=m @@ -3039,6 +3043,7 @@ CONFIG_TOUCHSCREEN_USB_EASYTOUCH=y CONFIG_TOUCHSCREEN_TOUCHIT213=m CONFIG_TOUCHSCREEN_TSC_SERIO=m CONFIG_TOUCHSCREEN_TSC2007=m +# CONFIG_TOUCHSCREEN_W90X900 is not set CONFIG_TOUCHSCREEN_ST1232=m CONFIG_TOUCHSCREEN_SUR40=m CONFIG_TOUCHSCREEN_TPS6507X=m @@ -3176,8 +3181,10 @@ CONFIG_HW_RANDOM=y CONFIG_HW_RANDOM_TIMERIOMEM=m CONFIG_HW_RANDOM_INTEL=m CONFIG_HW_RANDOM_AMD=m +# CONFIG_HW_RANDOM_ATMEL is not set CONFIG_HW_RANDOM_VIA=m CONFIG_HW_RANDOM_VIRTIO=m +# CONFIG_HW_RANDOM_EXYNOS is not set CONFIG_HW_RANDOM_TPM=m CONFIG_NVRAM=y CONFIG_R3964=m @@ -3222,6 +3229,7 @@ CONFIG_I2C_MUX=m CONFIG_I2C_MUX_GPIO=m CONFIG_I2C_MUX_PCA9541=m CONFIG_I2C_MUX_PCA954x=m +# CONFIG_I2C_MUX_PINCTRL is not set CONFIG_I2C_HELPER_AUTO=y CONFIG_I2C_SMBUS=m CONFIG_I2C_ALGOBIT=m @@ -3262,6 +3270,7 @@ CONFIG_I2C_SCMI=m # CONFIG_I2C_CBUS_GPIO=m CONFIG_I2C_DESIGNWARE_CORE=m +CONFIG_I2C_DESIGNWARE_PLATFORM=m CONFIG_I2C_DESIGNWARE_PCI=m CONFIG_I2C_EG20T=m CONFIG_I2C_GPIO=m @@ -3325,6 +3334,15 @@ CONFIG_PTP_1588_CLOCK=m # Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks. # CONFIG_PTP_1588_CLOCK_PCH=m +CONFIG_PINCTRL=y + +# +# Pin controllers +# +# CONFIG_PINMUX is not set +# CONFIG_PINCONF is not set +# CONFIG_DEBUG_PINCTRL is not set +# CONFIG_PINCTRL_BAYTRAIL is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y CONFIG_GPIOLIB=y CONFIG_GPIO_DEVRES=y @@ -4010,6 +4028,8 @@ CONFIG_SOC_CAMERA=m CONFIG_SOC_CAMERA_SCALE_CROP=m CONFIG_SOC_CAMERA_PLATFORM=m CONFIG_VIDEO_RCAR_VIN=m +# CONFIG_VIDEO_SH_MOBILE_CSI2 is not set +# CONFIG_VIDEO_SH_MOBILE_CEU is not set CONFIG_V4L_MEM2MEM_DRIVERS=y CONFIG_VIDEO_MEM2MEM_DEINTERLACE=m # CONFIG_VIDEO_SH_VEU is not set @@ -5010,6 +5030,8 @@ CONFIG_MMC_SDHCI_PCI=m CONFIG_MMC_RICOH_MMC=y CONFIG_MMC_SDHCI_ACPI=m CONFIG_MMC_SDHCI_PLTFM=m +# CONFIG_MMC_SDHCI_PXAV3 is not set +# CONFIG_MMC_SDHCI_PXAV2 is not set CONFIG_MMC_WBSD=m CONFIG_MMC_TIFM_SD=m CONFIG_MMC_SDRICOH_CS=m @@ -5442,6 +5464,15 @@ CONFIG_INTEL_SMARTCONNECT=m CONFIG_PVPANIC=m CONFIG_CHROME_PLATFORMS=y CONFIG_CHROMEOS_LAPTOP=m +CONFIG_CLKDEV_LOOKUP=y +CONFIG_HAVE_CLK_PREPARE=y +CONFIG_COMMON_CLK=y + +# +# Common Clock Framework +# +# CONFIG_COMMON_CLK_DEBUG is not set +# CONFIG_COMMON_CLK_SI5351 is not set # # Hardware Spinlock drivers diff --git a/config/x86_64/default b/config/x86_64/default index 9671244..7324355 100644 --- a/config/x86_64/default +++ b/config/x86_64/default @@ -250,6 +250,7 @@ CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_DMA_ATTRS=y CONFIG_GENERIC_SMP_IDLE_THREAD=y CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y +CONFIG_HAVE_CLK=y CONFIG_HAVE_DMA_API_DEBUG=y CONFIG_HAVE_HW_BREAKPOINT=y CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y @@ -358,7 +359,7 @@ CONFIG_X86_EXTENDED_PLATFORM=y # CONFIG_X86_NUMACHIP is not set # CONFIG_X86_VSMP is not set CONFIG_X86_UV=y -# CONFIG_X86_INTEL_LPSS is not set +CONFIG_X86_INTEL_LPSS=y CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y CONFIG_HYPERVISOR_GUEST=y CONFIG_PARAVIRT=y @@ -543,6 +544,7 @@ CONFIG_DPM_WATCHDOG=y CONFIG_DPM_WATCHDOG_TIMEOUT=12 CONFIG_PM_TRACE=y CONFIG_PM_TRACE_RTC=y +CONFIG_PM_CLK=y # CONFIG_WQ_POWER_EFFICIENT_DEFAULT is not set CONFIG_ACPI=y CONFIG_ACPI_SLEEP=y @@ -1721,6 +1723,7 @@ CONFIG_BLK_DEV_RSXX=m CONFIG_SENSORS_LIS3LV02D=m CONFIG_AD525X_DPOT=m CONFIG_AD525X_DPOT_I2C=m +# CONFIG_ATMEL_PWM is not set CONFIG_DUMMY_IRQ=m CONFIG_IBM_ASM=m CONFIG_PHANTOM=m @@ -2911,6 +2914,7 @@ CONFIG_KEYBOARD_MCS=m CONFIG_KEYBOARD_MPR121=m CONFIG_KEYBOARD_NEWTON=m CONFIG_KEYBOARD_OPENCORES=m +# CONFIG_KEYBOARD_SAMSUNG is not set # CONFIG_KEYBOARD_STOWAWAY is not set CONFIG_KEYBOARD_SUNKBD=m CONFIG_KEYBOARD_XTKBD=m @@ -3030,6 +3034,7 @@ CONFIG_TOUCHSCREEN_USB_EASYTOUCH=y CONFIG_TOUCHSCREEN_TOUCHIT213=m CONFIG_TOUCHSCREEN_TSC_SERIO=m CONFIG_TOUCHSCREEN_TSC2007=m +# CONFIG_TOUCHSCREEN_W90X900 is not set CONFIG_TOUCHSCREEN_ST1232=m CONFIG_TOUCHSCREEN_SUR40=m CONFIG_TOUCHSCREEN_TPS6507X=m @@ -3168,8 +3173,10 @@ CONFIG_HW_RANDOM=y CONFIG_HW_RANDOM_TIMERIOMEM=m CONFIG_HW_RANDOM_INTEL=m CONFIG_HW_RANDOM_AMD=m +# CONFIG_HW_RANDOM_ATMEL is not set CONFIG_HW_RANDOM_VIA=m CONFIG_HW_RANDOM_VIRTIO=m +# CONFIG_HW_RANDOM_EXYNOS is not set CONFIG_HW_RANDOM_TPM=m CONFIG_NVRAM=y CONFIG_R3964=m @@ -3214,6 +3221,7 @@ CONFIG_I2C_MUX=m CONFIG_I2C_MUX_GPIO=m CONFIG_I2C_MUX_PCA9541=m CONFIG_I2C_MUX_PCA954x=m +# CONFIG_I2C_MUX_PINCTRL is not set CONFIG_I2C_HELPER_AUTO=y CONFIG_I2C_SMBUS=m CONFIG_I2C_ALGOBIT=m @@ -3254,6 +3262,7 @@ CONFIG_I2C_SCMI=m # CONFIG_I2C_CBUS_GPIO=m CONFIG_I2C_DESIGNWARE_CORE=m +CONFIG_I2C_DESIGNWARE_PLATFORM=m CONFIG_I2C_DESIGNWARE_PCI=m CONFIG_I2C_EG20T=m CONFIG_I2C_GPIO=m @@ -3317,6 +3326,15 @@ CONFIG_PTP_1588_CLOCK=m # Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks. # CONFIG_PTP_1588_CLOCK_PCH=m +CONFIG_PINCTRL=y + +# +# Pin controllers +# +# CONFIG_PINMUX is not set +# CONFIG_PINCONF is not set +# CONFIG_DEBUG_PINCTRL is not set +# CONFIG_PINCTRL_BAYTRAIL is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y CONFIG_GPIOLIB=y CONFIG_GPIO_DEVRES=y @@ -4038,6 +4056,8 @@ CONFIG_SOC_CAMERA=m CONFIG_SOC_CAMERA_SCALE_CROP=m CONFIG_SOC_CAMERA_PLATFORM=m CONFIG_VIDEO_RCAR_VIN=m +# CONFIG_VIDEO_SH_MOBILE_CSI2 is not set +# CONFIG_VIDEO_SH_MOBILE_CEU is not set CONFIG_V4L_MEM2MEM_DRIVERS=y CONFIG_VIDEO_MEM2MEM_DEINTERLACE=m # CONFIG_VIDEO_SH_VEU is not set @@ -5038,6 +5058,8 @@ CONFIG_MMC_SDHCI_PCI=m CONFIG_MMC_RICOH_MMC=y CONFIG_MMC_SDHCI_ACPI=m CONFIG_MMC_SDHCI_PLTFM=m +# CONFIG_MMC_SDHCI_PXAV3 is not set +# CONFIG_MMC_SDHCI_PXAV2 is not set CONFIG_MMC_WBSD=m CONFIG_MMC_TIFM_SD=m CONFIG_MMC_SDRICOH_CS=m @@ -5472,6 +5494,15 @@ CONFIG_INTEL_SMARTCONNECT=m CONFIG_PVPANIC=m CONFIG_CHROME_PLATFORMS=y CONFIG_CHROMEOS_LAPTOP=m +CONFIG_CLKDEV_LOOKUP=y +CONFIG_HAVE_CLK_PREPARE=y +CONFIG_COMMON_CLK=y + +# +# Common Clock Framework +# +# CONFIG_COMMON_CLK_DEBUG is not set +# CONFIG_COMMON_CLK_SI5351 is not set # # Hardware Spinlock drivers diff --git a/config/x86_64/desktop b/config/x86_64/desktop index f32401e..0db800f 100644 --- a/config/x86_64/desktop +++ b/config/x86_64/desktop @@ -252,6 +252,7 @@ CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_DMA_ATTRS=y CONFIG_GENERIC_SMP_IDLE_THREAD=y CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y +CONFIG_HAVE_CLK=y CONFIG_HAVE_DMA_API_DEBUG=y CONFIG_HAVE_HW_BREAKPOINT=y CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y @@ -356,7 +357,7 @@ CONFIG_X86_EXTENDED_PLATFORM=y # CONFIG_X86_NUMACHIP is not set # CONFIG_X86_VSMP is not set CONFIG_X86_UV=y -# CONFIG_X86_INTEL_LPSS is not set +CONFIG_X86_INTEL_LPSS=y CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y CONFIG_HYPERVISOR_GUEST=y CONFIG_PARAVIRT=y @@ -542,6 +543,7 @@ CONFIG_DPM_WATCHDOG=y CONFIG_DPM_WATCHDOG_TIMEOUT=12 CONFIG_PM_TRACE=y CONFIG_PM_TRACE_RTC=y +CONFIG_PM_CLK=y # CONFIG_WQ_POWER_EFFICIENT_DEFAULT is not set CONFIG_ACPI=y CONFIG_ACPI_SLEEP=y @@ -1720,6 +1722,7 @@ CONFIG_BLK_DEV_RSXX=m CONFIG_SENSORS_LIS3LV02D=m CONFIG_AD525X_DPOT=m CONFIG_AD525X_DPOT_I2C=m +# CONFIG_ATMEL_PWM is not set CONFIG_DUMMY_IRQ=m CONFIG_IBM_ASM=m CONFIG_PHANTOM=m @@ -2910,6 +2913,7 @@ CONFIG_KEYBOARD_MCS=m CONFIG_KEYBOARD_MPR121=m CONFIG_KEYBOARD_NEWTON=m CONFIG_KEYBOARD_OPENCORES=m +# CONFIG_KEYBOARD_SAMSUNG is not set # CONFIG_KEYBOARD_STOWAWAY is not set CONFIG_KEYBOARD_SUNKBD=m CONFIG_KEYBOARD_XTKBD=m @@ -3029,6 +3033,7 @@ CONFIG_TOUCHSCREEN_USB_EASYTOUCH=y CONFIG_TOUCHSCREEN_TOUCHIT213=m CONFIG_TOUCHSCREEN_TSC_SERIO=m CONFIG_TOUCHSCREEN_TSC2007=m +# CONFIG_TOUCHSCREEN_W90X900 is not set CONFIG_TOUCHSCREEN_ST1232=m CONFIG_TOUCHSCREEN_SUR40=m CONFIG_TOUCHSCREEN_TPS6507X=m @@ -3167,8 +3172,10 @@ CONFIG_HW_RANDOM=y CONFIG_HW_RANDOM_TIMERIOMEM=m CONFIG_HW_RANDOM_INTEL=m CONFIG_HW_RANDOM_AMD=m +# CONFIG_HW_RANDOM_ATMEL is not set CONFIG_HW_RANDOM_VIA=m CONFIG_HW_RANDOM_VIRTIO=m +# CONFIG_HW_RANDOM_EXYNOS is not set CONFIG_HW_RANDOM_TPM=m CONFIG_NVRAM=y CONFIG_R3964=m @@ -3213,6 +3220,7 @@ CONFIG_I2C_MUX=m CONFIG_I2C_MUX_GPIO=m CONFIG_I2C_MUX_PCA9541=m CONFIG_I2C_MUX_PCA954x=m +# CONFIG_I2C_MUX_PINCTRL is not set CONFIG_I2C_HELPER_AUTO=y CONFIG_I2C_SMBUS=m CONFIG_I2C_ALGOBIT=m @@ -3253,6 +3261,7 @@ CONFIG_I2C_SCMI=m # CONFIG_I2C_CBUS_GPIO=m CONFIG_I2C_DESIGNWARE_CORE=m +CONFIG_I2C_DESIGNWARE_PLATFORM=m CONFIG_I2C_DESIGNWARE_PCI=m CONFIG_I2C_EG20T=m CONFIG_I2C_GPIO=m @@ -3316,6 +3325,15 @@ CONFIG_PTP_1588_CLOCK=m # Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks. # CONFIG_PTP_1588_CLOCK_PCH=m +CONFIG_PINCTRL=y + +# +# Pin controllers +# +# CONFIG_PINMUX is not set +# CONFIG_PINCONF is not set +# CONFIG_DEBUG_PINCTRL is not set +# CONFIG_PINCTRL_BAYTRAIL is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y CONFIG_GPIOLIB=y CONFIG_GPIO_DEVRES=y @@ -4037,6 +4055,8 @@ CONFIG_SOC_CAMERA=m CONFIG_SOC_CAMERA_SCALE_CROP=m CONFIG_SOC_CAMERA_PLATFORM=m CONFIG_VIDEO_RCAR_VIN=m +# CONFIG_VIDEO_SH_MOBILE_CSI2 is not set +# CONFIG_VIDEO_SH_MOBILE_CEU is not set CONFIG_V4L_MEM2MEM_DRIVERS=y CONFIG_VIDEO_MEM2MEM_DEINTERLACE=m # CONFIG_VIDEO_SH_VEU is not set @@ -5029,6 +5049,8 @@ CONFIG_MMC_SDHCI_PCI=m CONFIG_MMC_RICOH_MMC=y CONFIG_MMC_SDHCI_ACPI=m CONFIG_MMC_SDHCI_PLTFM=m +# CONFIG_MMC_SDHCI_PXAV3 is not set +# CONFIG_MMC_SDHCI_PXAV2 is not set CONFIG_MMC_WBSD=m CONFIG_MMC_TIFM_SD=m CONFIG_MMC_SDRICOH_CS=m @@ -5463,6 +5485,15 @@ CONFIG_INTEL_SMARTCONNECT=m CONFIG_PVPANIC=m CONFIG_CHROME_PLATFORMS=y CONFIG_CHROMEOS_LAPTOP=m +CONFIG_CLKDEV_LOOKUP=y +CONFIG_HAVE_CLK_PREPARE=y +CONFIG_COMMON_CLK=y + +# +# Common Clock Framework +# +# CONFIG_COMMON_CLK_DEBUG is not set +# CONFIG_COMMON_CLK_SI5351 is not set # # Hardware Spinlock drivers -- 1.8.4

2 1