December 2012 - openSUSE Kernel - openSUSE Mailing Lists

[opensuse-kernel] kernel-default-base-2.6.29-5.2.x86_64 rpm errors
by Dave Plater 18 Jul '24

18 Jul '24

Hi, I'm busy updating to the latest factory kernel and have received the following errors from kernel-default-base installation (I did insert a blank dvd during the installation of the rpm by zypper):- WARNING: /lib/modules/2.6.29-rc8-5-default/kernel/drivers/scsi/sd_mod.ko needs unknown symbol crc_t10dif WARNING: /lib/modules/2.6.29-rc8-5-default/kernel/drivers/scsi/sr_mod.ko needs unknown symbol register_cdrom WARNING: /lib/modules/2.6.29-rc8-5-default/kernel/drivers/scsi/sr_mod.ko needs unknown symbol cdrom_ioctl WARNING: /lib/modules/2.6.29-rc8-5-default/kernel/drivers/scsi/sr_mod.ko needs unknown symbol cdrom_media_changed WARNING: /lib/modules/2.6.29-rc8-5-default/kernel/drivers/scsi/sr_mod.ko needs unknown symbol cdrom_get_media_event WARNING: /lib/modules/2.6.29-rc8-5-default/kernel/drivers/scsi/sr_mod.ko needs unknown symbol cdrom_release WARNING: /lib/modules/2.6.29-rc8-5-default/kernel/drivers/scsi/sr_mod.ko needs unknown symbol cdrom_open WARNING: /lib/modules/2.6.29-rc8-5-default/kernel/drivers/scsi/sr_mod.ko needs unknown symbol unregister_cdrom WARNING: /lib/modules/2.6.29-rc8-5-default/kernel/drivers/scsi/sr_mod.ko needs unknown symbol cdrom_number_of_slots And then these errors which I think IIRC happened before when the kernel was first split into three:- Kernel image: /boot/vmlinuz-2.6.29-rc8-5-default Initrd image: /boot/initrd-2.6.29-rc8-5-default Root device: /dev/disk/by-id/ata-WDC_WD800JB-00JJC0_WD-WMAM9RA78067-part3 (/dev/sda3) (mounted on / as xfs) Resume device: /dev/disk/by-id/ata-WDC_WD800JB-00JJC0_WD-WMAM9RA78067-part2 (/dev/sda2) FATAL: Module processor not found. WARNING: no dependencies for kernel module 'processor' found. FATAL: Module thermal not found. WARNING: no dependencies for kernel module 'thermal' found. FATAL: Module ata_generic not found. WARNING: no dependencies for kernel module 'ata_generic' found. FATAL: Module piix not found. WARNING: no dependencies for kernel module 'piix' found. FATAL: Module ide_pci_generic not found. WARNING: no dependencies for kernel module 'ide_pci_generic' found. FATAL: Module fan not found. WARNING: no dependencies for kernel module 'fan' found. FATAL: Module xfs not found. WARNING: no dependencies for kernel module 'xfs' found. FATAL: Module usbhid not found. WARNING: no dependencies for kernel module 'usbhid' found. Kernel Modules: scsi_mod libata ata_piix edd ahci sd_mod usbcore ohci-hcd ehci-hcd uhci-hcd WARNING: /dev/shm/mkinitramfs.0drQsZ/mnt/lib/modules/2.6.29-rc8-5-default/kernel/drivers/scsi/sd_mod.ko needs unknown symbol crc_t10dif Features: block usb resume.userspace resume.kernel Bootsplash: openSUSE (1280x1024) 22669 blocks Should I open a bug report about the errors which are possibly from inserting a dvd while the kernel rpm was installing? Regards Dave P -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-kernel+help(a)opensuse.org

2 2

[opensuse-kernel] CONFIG_CC_STACKPROTECTOR
by richard -rw- weinberger 14 Dec '13

14 Dec '13

Hi! I'm wondering why CONFIG_CC_STACKPROTECTOR is disabled on openSUSE. Debian and Fedora seem to enabled it per default. What's the deal? -- Thanks, //richard -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-kernel+owner(a)opensuse.org

7 17

[opensuse-kernel] [PATCH] backport patch from commit b9ed9f0ecf1b5675c64d069e9b53effe276b6f01 to fix include error for drm_mode.h
by Guillaume Gardet 17 Jan '13

17 Jan '13

Hi, This patch backport patch from commit b9ed9f0ecf1b5675c64d069e9b53effe276b6f01 to fix include error for drm_mode.h This is needed to fix kernel-omap2plus build. Signed-off-by: Guillaume GARDET <guillaume.gardet(a)opensuse.org> Regards, Guillaume

3 4

[opensuse-kernel] openSUSE 12.2 kernel build failure.
by phi gcc 31 Dec '12

31 Dec '12

Hi All, This is a re-post from a post I did on opensuse(a)opensuse.org, as it may be more appropriate here. New to opensuse, I try to build the newly installed machine with its current kernel version. I'd like to build the kernel from the source we got with the regular distro, I will do git extraction and build later. For now I need to build the kernel rpms (i.e kernel + debuginfo for kernel/modules). So far I can't build the standard kernel. Again I am new to this and my build process may be flawed, then any help would be appreciated. Here is the trail of events. 1) fresh 12.2 install CY44$ /usr/bin/lsb-release -a LSB Version: n/a Distributor ID: SUSE LINUX Description: openSUSE 12.2 (x86_64) Release: 12.2 Codename: Mantis 2) Download 2 metapackages patterns-openSUSE-dev-basis patterns-openSUSE-devel-kernel 3) Downloaded kernel source thought may be they was there after the initial install. 4) make source suitable for non root compile. CY44$ cd /usr/src/linux CY44$ sudo chown -R phi . 5) Clone initial config and patch CONFIG_LOCAL_VERSION CY44$ make cloneconfig CY44$ vi .config # set CONFIG_LOCALVERSION="-2.16-phi" 6) Kernel build CY44$ make 7) Build RPM CY44$ make rpm-pkg make clean set -e; cd -P ..; ln -sf /usr/src/linux-3.4.11-2.16 kernel-3.4.11_2.16_phi /bin/sh /usr/src/linux-3.4.11-2.16/scripts/setlocalversion --save-scmversion set -e; cd -P ..; tar -cz --exclude SCCS --exclude BitKeeper --exclude .svn --exclude CVS --exclude .pc --exclude .hg --exclude .git -f kernel-3.4.11_2.16_phi.tar.gz kernel-3.4.11_2.16_phi/. set -e; cd -P ..; rm kernel-3.4.11_2.16_phi rm -f /usr/src/linux-3.4.11-2.16/.scmversion set -e; \ /bin/sh /usr/src/linux-3.4.11-2.16/scripts/mkversion > /usr/src/linux-3.4.11-2.16/.tmp_version set -e; \ mv -f /usr/src/linux-3.4.11-2.16/.tmp_version /usr/src/linux-3.4.11-2.16/.version rpm --target x86_64 -ta ../kernel-3.4.11_2.16_phi.tar.gz rpm: --target: unknown option make[1]: *** [rpm-pkg] Error 1 make: *** [rpm-pkg] Error 2 make rpm give the same results as make rpm-pkg Any ideas? Cheers, Phi -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-kernel+owner(a)opensuse.org

2 2

[opensuse-kernel] Kernel Panic 12.2
by Günther J. Niederwimmer 27 Dec '12

27 Dec '12

Hello, i have from time to time a kernel Panic on first booting on a Day. Kernel panic - natsyncing: Watchdog detected hard LOCKUP on CPU 0 This is a Intel CPU i7-990X with 6(12) core, original 12.2 Kernel. This is only in Linux. Can I do anything .... -- mit freundlichen Grüßen / best Regards. Günther J. Niederwimmer -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-kernel+owner(a)opensuse.org

2 1

[opensuse-kernel] What steps are needed to bump up the minor kernel revision level ?
by doiggl＠velocitynet.com.au 22 Dec '12

22 Dec '12

Hello, What steps are needed to bump up the kernel minor revision level e.g From:3.6.10 To:3.6.11 I know these need changing in kernel-vanilla.spec - %define patchversion 3.6.10 Version: 3.6.10 Thanks Glenn other information ################ http://www.kernel.org/pub/linux/kernel/v3.0/incr/ patch-3.6.10-11.bz2 17-Dec-2012 17:40 19K patch-3.6.10-11.gz 17-Dec-2012 17:40 20K patch-3.6.10-11.sign 17-Dec-2012 17:40 836 patch-3.6.10-11.xz 17-Dec-2012 17:40 18K File list ######### README.KSYMS README.SUSE _link apply-patches arch-symbols check-for-config-changes check-supported-list compute-PATCHVERSION.sh config-options.changes.txt config.addon.tar.bz2 config.conf config.sh config.tar.bz2 configtool.pl devel-post.sh devel-pre.sh find-provides group-source-files.pl guards host-memcpy-hack.h kabi.pl kabi.tar.bz2 kernel-binary.spec.in kernel-cubox.changes kernel-cubox.spec kernel-debug.changes kernel-debug.spec kernel-default.changes kernel-default.spec kernel-desktop.changes kernel-desktop.spec kernel-docs.changes kernel-docs.spec kernel-docs.spec.in kernel-ec2.changes kernel-ec2.spec kernel-exynos.changes kernel-exynos.spec kernel-highbank.changes kernel-highbank.spec kernel-imx51.changes kernel-imx51.spec kernel-module-subpackage kernel-omap2plus.changes kernel-omap2plus.spec kernel-pae.changes kernel-pae.spec kernel-ppc64.changes kernel-ppc64.spec kernel-s390.changes kernel-s390.spec kernel-source.changes kernel-source.rpmlintrc kernel-source.spec kernel-source.spec.in kernel-spec-macros kernel-syms.changes kernel-syms.spec kernel-syms.spec.in kernel-tegra.changes kernel-tegra.spec kernel-trace.changes kernel-trace.spec kernel-u8500.changes kernel-u8500.spec kernel-vanilla.changes kernel-vanilla.spec kernel-xen.changes kernel-xen.spec linux-3.6.tar.bz2 log.sh macros.kernel-source minmem mkspec modversions needed_space_in_mb old-packages.conf package-descriptions patches.addon.tar.bz2 patches.apparmor.tar.bz2 patches.arch.tar.bz2 patches.drivers.tar.bz2 patches.fixes.tar.bz2 patches.kabi.tar.bz2 patches.kernel.org.tar.bz2 patches.rpmify.tar.bz2 patches.rt.tar.bz2 patches.suse.tar.bz2 patches.trace.tar.bz2 patches.xen.tar.bz2 post.sh postun.sh pre.sh preun.sh series.conf source-post.sh source-timestamp split-modules supported.conf sysctl.tar.bz2 try-disable-staging-driver -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-kernel+owner(a)opensuse.org

1 0

[opensuse-kernel] RT and high priority tasks on system resume
by Cristian Rodríguez 19 Dec '12

19 Dec '12

Hi: I was just wondering if the following is expected behaviour from the kernel perspective. On resume from suspend to ram, tasks that were previously RT or very high priority such as those controlled by rtkit and pulseaudio appear running and fine but no longer with the priority that were previously assigned. Is this a limitation/bug in the kernel or something to deal in userspace ? Thanks. -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-kernel+owner(a)opensuse.org

2 4

[opensuse-kernel] Can Kernel:stable > kernel-source be updated to version 3.6.11
by doiggl＠velocitynet.com.au 18 Dec '12

18 Dec '12

Hello, Can Kernel:stable > kernel-source be updated to version 3.6.11 please ?. Thankyou Glenn [1] https://build.opensuse.org/project/show?project=Kernel%3Astable http://www.kernel.org/pub/linux/kernel/v3.0/patch-3.6.11.bz2 http://www.kernel.org/pub/linux/kernel/v3.0/linux-3.6.11.tar.bz2 stable 3.6.11 (EOL) listed on https://lkml.org/ -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-kernel+owner(a)opensuse.org

2 1

[opensuse-kernel] kernel.git at kernel.opensuse.org not updated since thursday
by Kshitij Kulshreshtha 18 Dec '12

18 Dec '12

Hello, the opensuse kernel git repository has not been updated since Thursday and neither is the repository at gitorious.org/opensuse/kernel-source However the OBS is building newer kernels in Kernel:stable (commit 5e9fe704) and Kernel:HEAD (commit 7c5f8a66). Both these commits are not in the published git repositories. Is there some kind of embargo on the opensuse kernel sources currently? -- Dr. Kshitij Kulshreshtha -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-kernel+owner(a)opensuse.org

1 0

[opensuse-kernel] kernel-default-3.6.10-15.1.i586 : cannot mount HDD device SDA
by ellanios82 18 Dec '12

18 Dec '12

Hello List Tumbleweed : kernel-default-3.6.10-15.1.i586 __________ my system boots on /dev/sdb which is 1 TB SATA HDD - i have a /dev/sda for backups, which is 360 GB PATA HDD .............. kernel-default-3.6.10-15.1.i586 does not allow me to mount /dev/sda kernel 3.4.6-2.10-desktop DOES allow mounting of /dev/sda & sees /dev/sda OK ................. - with kernel-default-3.6.10-15.1.i586 i get : command : _______ # mount /dev/sda4 /mnt mount: special device /dev/sda4 does not exist .................... here are the results of several commands : _____________________________________ ................ # lsusb Bus 001 Device 002: ID 152e:2507 LG (HLDS) PL-2507 IDE Controller Bus 004 Device 002: ID 04b4:0033 Cypress Semiconductor Corp. Mouse Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub ............... fdisk -l Disk /dev/sda: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000bf499 Device Boot Start End Blocks Id System /dev/sda1 * 63 146802032 73400985 83 Linux /dev/sda2 146802033 461370735 157284351+ 83 Linux /dev/sda3 461370736 471861180 5245222+ 82 Linux swap / Solaris /dev/sda4 * 471861181 625137344 76638082 83 Linux Disk /dev/sdb: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000265f2 Device Boot Start End Blocks Id System /dev/sdb1 * 63 585938744 292969341 83 Linux /dev/sdb2 585938745 1171877489 292969372+ 83 Linux /dev/sdb3 1171877490 1181645009 4883760 82 Linux swap / Solaris /dev/sdb4 * 1181645010 1767583754 292969372+ 83 Linux .............................. # lspci | grep IDE 00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 01) 00:1f.2 IDE interface: Intel Corporation N10/ICH7 Family SATA Controller [IDE mode] (rev 01) .................... # lsscsi [0:0:1:0] disk ATA ST3320620A 3.AA /dev/sda [2:0:1:0] disk ATA WDC WD10EAVS-00M 01.0 /dev/sdb [3:0:1:0] cd/dvd Optiarc DVD RW AD-5260S 1.00 /dev/sr0 [4:0:0:0] cd/dvd HL-DT-ST DVD-RAM GSA-E60N 1.00 /dev/sr1 ..................... # uname -a Linux AIG 3.6.10-15-default #1 SMP Mon Dec 10 22:29:57 UTC 2012 (fd6ec90) i686 i686 i386 GNU/Linux ............................ .............. # mount /dev/sda1 /mnt mount: special device /dev/sda1 does not exist .............. ............. [ back in early October mr Jiri kindly tried to help me, but because i do not feel sufficiently 'advanced' to wrestle with bugzilla reports, i went back to kernel 3.4.6-2.10 hoping this trouble would be solved and 'go away', but, no such luck ] - please excuse cross-posting, but was advised by 'Factory' that 'Kernel' list more appropriate. best regards Ellan -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-kernel+owner(a)opensuse.org

3 4