- openSUSE Autoinstall

[opensuse-autoinstall] An error occurred during initrd creation.
by limited.address 02 Sep '09

02 Sep '09

Hi, Using 11.2 M4 for repository Using "smallest autoyast profile that makes sense" Using 11.2 M4 files to build boot disk "An error occurred during initrd creation." What do I do now? Ekaj -- To unsubscribe, e-mail: opensuse-autoinstall+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-autoinstall+help(a)opensuse.org

2 2

[opensuse-autoinstall] Problems with prompted IP values
by Eric Rothweiler 25 Aug '09

25 Aug '09

Pardon what seems to me to be a very simple question - I have saved some system configs for use by Autoyast however I need to manually do so some editing to prompt for: Nodename IP address IP mask IP default gateway The nodename is taking just fine. My default value for the mask is falling in place but I'm not so sure a non default will take. The other IP values of address and mask are not taking, It seems to be caused by the node believing it is going to get it's IP via DHCP (that is the active method after installation completes) I've searched the official documentation as well as reading some other folks primers on Autoyast but I am missing something. Could someone look over this profile and help me find what I'm missing? TIA Eric <?xml version="1.0"?> <!DOCTYPE profile> <profile xmlns="http://www.suse.com/1.0/yast2ns" xmlns:config="http://www.suse.com/1.0/configns"> <add-on> <add_on_products config:type="list"/> </add-on> <bootloader> <device_map config:type="list"> <device_map_entry> <firmware>fd0</firmware> <linux>/dev/fd0</linux> </device_map_entry> <device_map_entry> <firmware>hd0</firmware> <linux>/dev/sda</linux> </device_map_entry> </device_map> <global> <activate>true</activate> <boot_boot>true</boot_boot> <default>SUSE Linux Enterprise Server 10 SP2</default> <generic_mbr>true</generic_mbr> <gfxmenu>/boot/message</gfxmenu> <lines_cache_id>3</lines_cache_id> <timeout config:type="integer">8</timeout> </global> <initrd_modules config:type="list"> <initrd_module> <module>piix</module> </initrd_module> <initrd_module> <module>mptspi</module> </initrd_module> <initrd_module> <module>processor</module> </initrd_module> <initrd_module> <module>thermal</module> </initrd_module> <initrd_module> <module>fan</module> </initrd_module> <initrd_module> <module>jbd</module> </initrd_module> <initrd_module> <module>ext3</module> </initrd_module> <initrd_module> <module>dm_mod</module> </initrd_module> <initrd_module> <module>edd</module> </initrd_module> </initrd_modules> <loader_type>grub</loader_type> <sections config:type="list"> <section> <append>resume=/dev/sda2 splash=silent clock=pit showopts</append> <image>/boot/vmlinuz-2.6.16.60-0.21-default</image> <initial>1</initial> <initrd>/boot/initrd-2.6.16.60-0.21-default</initrd> <kernel>/boot/vmlinuz</kernel> <lines_cache_id>0</lines_cache_id> <name>SUSE Linux Enterprise Server 10 SP2</name> <original_name>linux</original_name> <root>/dev/system/slash</root> <type>image</type> <vga>0x32b</vga> <vgamode>0x32b</vgamode> </section> <section> <blockoffset>1</blockoffset> <chainloader>/dev/fd0</chainloader> <lines_cache_id>1</lines_cache_id> <name>Floppy</name> <noverifyroot>true</noverifyroot> <original_name>floppy</original_name> <root></root> <type>other</type> </section> <section> <append>showopts ide=nodma apm=off acpi=off noresume nosmp noapic maxcpus=0 edd=off 3</append> <image>/boot/vmlinuz-2.6.16.60-0.21-default</image> <initrd>/boot/initrd-2.6.16.60-0.21-default</initrd> <kernel>/boot/vmlinuz</kernel> <lines_cache_id>2</lines_cache_id> <name>Failsafe -- SUSE Linux Enterprise Server 10 SP2</name> <original_name>failsafe</original_name> <root>/dev/system/slash</root> <type>image</type> <vga>normal</vga> <vgamode>normal</vgamode> </section> </sections> </bootloader> <ca_mgm> <CAName>YaST_Default_CA</CAName> <ca_commonName>YaST Default CA (vmguest)</ca_commonName> <country>EN</country> <locality></locality> <organisation></organisation> <organisationUnit></organisationUnit> <password>ENTER PASSWORD HERE</password> <server_commonName>vmguest.meadwestvaco.com</server_commonName> <server_email>postmaster(a)meadwestvaco.com</server_email> <state></state> <takeLocalServerName config:type="boolean">false</takeLocalServerName> </ca_mgm> <firewall> <FW_ALLOW_FW_BROADCAST_DMZ>no</FW_ALLOW_FW_BROADCAST_DMZ> <FW_ALLOW_FW_BROADCAST_EXT>no</FW_ALLOW_FW_BROADCAST_EXT> <FW_ALLOW_FW_BROADCAST_INT>no</FW_ALLOW_FW_BROADCAST_INT> <FW_DEV_DMZ></FW_DEV_DMZ> <FW_DEV_EXT>any</FW_DEV_EXT> <FW_DEV_INT></FW_DEV_INT> <FW_FORWARD_ALWAYS_INOUT_DEV></FW_FORWARD_ALWAYS_INOUT_DEV> <FW_FORWARD_MASQ></FW_FORWARD_MASQ> <FW_IGNORE_FW_BROADCAST_DMZ>no</FW_IGNORE_FW_BROADCAST_DMZ> <FW_IGNORE_FW_BROADCAST_EXT>yes</FW_IGNORE_FW_BROADCAST_EXT> <FW_IGNORE_FW_BROADCAST_INT>no</FW_IGNORE_FW_BROADCAST_INT> <FW_IPSEC_TRUST>no</FW_IPSEC_TRUST> <FW_LOG_ACCEPT_ALL>no</FW_LOG_ACCEPT_ALL> <FW_LOG_ACCEPT_CRIT>yes</FW_LOG_ACCEPT_CRIT> <FW_LOG_DROP_ALL>no</FW_LOG_DROP_ALL> <FW_LOG_DROP_CRIT>yes</FW_LOG_DROP_CRIT> <FW_MASQUERADE>no</FW_MASQUERADE> <FW_PROTECT_FROM_INT>no</FW_PROTECT_FROM_INT> <FW_ROUTE>no</FW_ROUTE> <FW_SERVICES_ACCEPT_DMZ></FW_SERVICES_ACCEPT_DMZ> <FW_SERVICES_ACCEPT_EXT></FW_SERVICES_ACCEPT_EXT> <FW_SERVICES_ACCEPT_INT></FW_SERVICES_ACCEPT_INT> <FW_SERVICES_DMZ_IP></FW_SERVICES_DMZ_IP> <FW_SERVICES_DMZ_RPC></FW_SERVICES_DMZ_RPC> <FW_SERVICES_DMZ_TCP></FW_SERVICES_DMZ_TCP> <FW_SERVICES_DMZ_UDP></FW_SERVICES_DMZ_UDP> <FW_SERVICES_EXT_IP></FW_SERVICES_EXT_IP> <FW_SERVICES_EXT_RPC></FW_SERVICES_EXT_RPC> <FW_SERVICES_EXT_TCP>ssh</FW_SERVICES_EXT_TCP> <FW_SERVICES_EXT_UDP></FW_SERVICES_EXT_UDP> <FW_SERVICES_INT_IP></FW_SERVICES_INT_IP> <FW_SERVICES_INT_RPC></FW_SERVICES_INT_RPC> <FW_SERVICES_INT_TCP></FW_SERVICES_INT_TCP> <FW_SERVICES_INT_UDP></FW_SERVICES_INT_UDP> <enable_firewall config:type="boolean">false</enable_firewall> <start_firewall config:type="boolean">false</start_firewall> </firewall> <general> <mode> <confirm config:type="boolean">false</confirm> </mode> <mouse> <id>none</id> </mouse> <signature-handling> <accept_file_without_checksum config:type="boolean">true</accept_file_without_checksum> <accept_non_trusted_gpg_key config:type="boolean">true</accept_non_trusted_gpg_key> <accept_unknown_gpg_key config:type="boolean">true</accept_unknown_gpg_key> <accept_unsigned_file config:type="boolean">true</accept_unsigned_file> <accept_verification_failed config:type="boolean">false</accept_verification_failed> <import_gpg_key config:type="boolean">true</import_gpg_key> </signature-handling> <ask-list config:type="list"> <ask> <path>networking,dns,hostname</path> <question>Enter Hostname (server name)</question> <stage>initial</stage> <default>enter your hostname here</default> </ask> <ask> <path>networking,interfaces,interface,ipaddr</path> <question>Enter the primary IP Address:</question> <stage>initial</stage> <default>127.0.0.1</default> </ask> <ask> <path>networking,interfaces,interface,netmask</path> <question>Enter the network mask:</question> <stage>initial</stage> <default>255.255.255.0</default> </ask> <ask> <path>networking,routing,route,gateway</path> <question>Enter the network mask:</question> <stage>initial</stage> <default>255.255.255.0</default> </ask> </ask-list> </general> <groups config:type="list"> <group> <group_password>x</group_password> <groupname>users</groupname> <userlist></userlist> </group> <group> <group_password>x</group_password> <groupname>floppy</groupname> <userlist></userlist> </group> <group> <group_password>x</group_password> <groupname>bin</groupname> <userlist>daemon</userlist> </group> <group> <group_password>x</group_password> <groupname>xok</groupname> <userlist></userlist> </group> <group> <group_password>x</group_password> <groupname>nobody</groupname> <userlist></userlist> </group> <group> <group_password>x</group_password> <groupname>modem</groupname> <userlist></userlist> </group> <group> <group_password>x</group_password> <groupname>lp</groupname> <userlist></userlist> </group> <group> <group_password>x</group_password> <groupname>tty</groupname> <userlist></userlist> </group> <group> <group_password>!</group_password> <groupname>postfix</groupname> <userlist></userlist> </group> <group> <group_password>!</group_password> <groupname>gdm</groupname> <userlist></userlist> </group> <group> <group_password>x</group_password> <groupname>nogroup</groupname> <userlist>nobody</userlist> </group> <group> <group_password>!</group_password> <groupname>maildrop</groupname> <userlist></userlist> </group> <group> <group_password>!</group_password> <groupname>messagebus</groupname> <userlist></userlist> </group> <group> <group_password>x</group_password> <groupname>video</groupname> <userlist></userlist> </group> <group> <group_password>x</group_password> <groupname>sys</groupname> <userlist></userlist> </group> <group> <group_password>x</group_password> <groupname>shadow</groupname> <userlist></userlist> </group> <group> <group_password>x</group_password> <groupname>console</groupname> <userlist></userlist> </group> <group> <group_password>x</group_password> <groupname>cdrom</groupname> <userlist></userlist> </group> <group> <group_password>!</group_password> <groupname>haldaemon</groupname> <userlist></userlist> </group> <group> <group_password>x</group_password> <groupname>trusted</groupname> <userlist></userlist> </group> <group> <group_password>x</group_password> <groupname>dialout</groupname> <userlist></userlist> </group> <group> <group_password>x</group_password> <groupname>wheel</groupname> <userlist></userlist> </group> <group> <group_password>x</group_password> <groupname>www</groupname> <userlist></userlist> </group> <group> <group_password>x</group_password> <groupname>games</groupname> <userlist></userlist> </group> <group> <group_password>x</group_password> <groupname>disk</groupname> <userlist></userlist> </group> <group> <group_password>x</group_password> <groupname>audio</groupname> <userlist></userlist> </group> <group> <group_password>!</group_password> <groupname>suse-ncc</groupname> <userlist></userlist> </group> <group> <group_password>x</group_password> <groupname>ftp</groupname> <userlist></userlist> </group> <group> <group_password>!</group_password> <groupname>at</groupname> <userlist></userlist> </group> <group> <group_password>x</group_password> <groupname>kmem</groupname> <userlist></userlist> </group> <group> <group_password>x</group_password> <groupname>public</groupname> <userlist></userlist> </group> <group> <group_password>x</group_password> <groupname>root</groupname> <userlist></userlist> </group> <group> <group_password>x</group_password> <groupname>mail</groupname> <userlist></userlist> </group> <group> <group_password>x</group_password> <groupname>daemon</groupname> <userlist></userlist> </group> <group> <group_password>!</group_password> <groupname>ntp</groupname> <userlist></userlist> </group> <group> <group_password>x</group_password> <groupname>uucp</groupname> <userlist></userlist> </group> <group> <group_password>!</group_password> <groupname>ntadmin</groupname> <userlist></userlist> </group> <group> <group_password>x</group_password> <groupname>man</groupname> <userlist></userlist> </group> <group> <group_password>x</group_password> <groupname>utmp</groupname> <userlist></userlist> </group> <group> <group_password>x</group_password> <groupname>news</groupname> <userlist></userlist> </group> <group> <group_password>!</group_password> <groupname>sshd</groupname> <userlist></userlist> </group> </groups> <host> <hosts config:type="list"> <hosts_entry> <host_address>127.0.0.1</host_address> <names config:type="list"> <name>localhost</name> </names> </hosts_entry> <hosts_entry> <host_address>192.168.254.254</host_address> <names config:type="list"> <name>vmguest.meadwestvaco.com vmguest</name> </names> </hosts_entry> <hosts_entry> <host_address>::1</host_address> <names config:type="list"> <name>localhost ipv6-localhost ipv6-loopback</name> </names> </hosts_entry> <hosts_entry> <host_address>fe00::0</host_address> <names config:type="list"> <name>ipv6-localnet</name> </names> </hosts_entry> <hosts_entry> <host_address>ff00::0</host_address> <names config:type="list"> <name>ipv6-mcastprefix</name> </names> </hosts_entry> <hosts_entry> <host_address>ff02::1</host_address> <names config:type="list"> <name>ipv6-allnodes</name> </names> </hosts_entry> <hosts_entry> <host_address>ff02::2</host_address> <names config:type="list"> <name>ipv6-allrouters</name> </names> </hosts_entry> <hosts_entry> <host_address>ff02::3</host_address> <names config:type="list"> <name>ipv6-allhosts</name> </names> </hosts_entry> </hosts> </host> <iscsi-client> <initiatorname></initiatorname> <targets config:type="list"/> <version>1.0</version> </iscsi-client> <keyboard> <keymap>english-us</keymap> </keyboard> <language> <language>en_US</language> <languages></languages> </language> <ldap> <base_config_dn></base_config_dn> <bind_dn></bind_dn> <create_ldap config:type="boolean">false</create_ldap> <file_server config:type="boolean">false</file_server> <ldap_domain></ldap_domain> <ldap_server></ldap_server> <ldap_tls config:type="boolean">false</ldap_tls> <ldap_v2 config:type="boolean">false</ldap_v2> <member_attribute></member_attribute> <pam_password></pam_password> <start_autofs config:type="boolean">false</start_autofs> <start_ldap config:type="boolean">false</start_ldap> </ldap> <ldap-server> <allowList config:type="list"/> <loglevel>256</loglevel> <schemaIncludeList config:type="list"/> <serviceEnabled>0</serviceEnabled> <tlsSettings/> </ldap-server> <networking> <dhcp_options> <dhclient_additional_options></dhclient_additional_options> <dhclient_client_id></dhclient_client_id> <dhclient_hostname_option>AUTO</dhclient_hostname_option> </dhcp_options> <dns> <dhcp_hostname config:type="boolean">false</dhcp_hostname> <dhcp_resolv config:type="boolean">true</dhcp_resolv> <domain>meadwestvaco.com</domain> <nameservers config:type="list"> <nameserver>10.197.102.45</nameserver> <nameserver>10.197.38.45</nameserver> <nameserver>10.197.18.45</nameserver> </nameservers> </dns> <interfaces config:type="list"> <interface> <bootproto>static</bootproto> <device>eth-id-00:50:56:94:13:7e</device> <name>AMD PCnet - Fast 79C971</name> <startmode>auto</startmode> <usercontrol>no</usercontrol> </interface> </interfaces> <managed config:type="boolean">false</managed> <modules config:type="list"> <module_entry> <device>bus-pci-0000:00:11.0</device> <module>pcnet32</module> <options></options> </module_entry> <module_entry> <device>static-printer</device> <module>lp</module> <options></options> </module_entry> <module_entry> <device>vpid-1000-0030</device> <module></module> <options></options> </module_entry> <module_entry> <device>vpid-1000-0040</device> <module></module> <options></options> </module_entry> <module_entry> <device>vpid-1000-0050</device> <module></module> <options></options> </module_entry> <module_entry> <device>vpid-1000-0054</device> <module></module> <options></options> </module_entry> <module_entry> <device>vpid-1000-0056</device> <module></module> <options></options> </module_entry> <module_entry> <device>vpid-1000-0058</device> <module></module> <options></options> </module_entry> <module_entry> <device>vpid-1000-0062</device> <module></module> <options></options> </module_entry> <module_entry> <device>vpid-1000-0621</device> <module></module> <options></options> </module_entry> <module_entry> <device>vpid-1000-0622</device> <module></module> <options></options> </module_entry> <module_entry> <device>vpid-1000-0624</device> <module></module> <options></options> </module_entry> <module_entry> <device>vpid-1000-0626</device> <module></module> <options></options> </module_entry> <module_entry> <device>vpid-1000-0628</device> <module></module> <options></options> </module_entry> <module_entry> <device>vpid-1000-0640</device> <module></module> <options></options> </module_entry> <module_entry> <device>vpid-1000-0642</device> <module></module> <options></options> </module_entry> <module_entry> <device>vpid-1000-0646</device> <module></module> <options></options> </module_entry> </modules> <routing> <ip_forward config:type="boolean">false</ip_forward> </routing> </networking> <nis> <nis_broadcast config:type="boolean">false</nis_broadcast> <nis_broken_server config:type="boolean">false</nis_broken_server> <nis_by_dhcp config:type="boolean">false</nis_by_dhcp> <nis_domain></nis_domain> <nis_local_only config:type="boolean">false</nis_local_only> <nis_options></nis_options> <nis_other_domains config:type="list"/> <nis_servers config:type="list"/> <start_autofs config:type="boolean">false</start_autofs> <start_nis config:type="boolean">false</start_nis> </nis> <partitioning config:type="list"> <drive> <device>/dev/sda</device> <partitions config:type="list"> <partition> <create config:type="boolean">true</create> <filesystem config:type="symbol">ext3</filesystem> <format config:type="boolean">true</format> <mount>/boot</mount> <mountby config:type="symbol">device</mountby> <partition_id config:type="integer">131</partition_id> <partition_nr config:type="integer">1</partition_nr> <partition_type>primary</partition_type> <size>411231744</size> </partition> <partition> <create config:type="boolean">true</create> <filesystem config:type="symbol">swap</filesystem> <format config:type="boolean">true</format> <mount>swap</mount> <mountby config:type="symbol">device</mountby> <partition_id config:type="integer">130</partition_id> <partition_nr config:type="integer">2</partition_nr> <partition_type>primary</partition_type> <size>1069285888</size> </partition> <partition> <create config:type="boolean">true</create> <lvm_group>system</lvm_group> <partition_id config:type="integer">142</partition_id> <partition_nr config:type="integer">3</partition_nr> <partition_type>primary</partition_type> <size>25062428160</size> </partition> </partitions> <use>all</use> </drive> <drive> <device>/dev/system</device> <lvm2 config:type="boolean">true</lvm2> <partitions config:type="list"> <partition> <create config:type="boolean">true</create> <filesystem config:type="symbol">ext3</filesystem> <format config:type="boolean">true</format> <lv_name>slash</lv_name> <mount>/</mount> <mountby config:type="symbol">device</mountby> <size>3221225472</size> </partition> <partition> <create config:type="boolean">true</create> <filesystem config:type="symbol">ext3</filesystem> <format config:type="boolean">true</format> <lv_name>tmp</lv_name> <mount>/tmp</mount> <mountby config:type="symbol">device</mountby> <size>3221225472</size> </partition> <partition> <create config:type="boolean">true</create> <filesystem config:type="symbol">ext3</filesystem> <format config:type="boolean">true</format> <lv_name>usr-novell</lv_name> <mount>/usr/novell</mount> <mountby config:type="symbol">device</mountby> <size>3221225472</size> </partition> <partition> <create config:type="boolean">true</create> <filesystem config:type="symbol">ext3</filesystem> <format config:type="boolean">true</format> <lv_name>var</lv_name> <mount>/var</mount> <mountby config:type="symbol">device</mountby> <size>3221225472</size> </partition> </partitions> <pesize>4M</pesize> <type config:type="symbol">CT_LVM</type> <use>all</use> </drive> </partitioning> <printer> <cups_installation config:type="symbol">client</cups_installation> <default></default> <printcap config:type="list"/> <server_hostname></server_hostname> <spooler>cups</spooler> </printer> <proxy> <enabled config:type="boolean">true</enabled> <ftp_proxy></ftp_proxy> <http_proxy>http://borderna.ha.mwv:8080</http_proxy> <https_proxy>http://borderna.ha.mwv:8080</https_proxy> <no_proxy>localhost, 127.0.0.1</no_proxy> <proxy_password></proxy_password> <proxy_user></proxy_user> </proxy> <report> <errors> <log config:type="boolean">true</log> <show config:type="boolean">true</show> <timeout config:type="integer">0</timeout> </errors> <messages> <log config:type="boolean">true</log> <show config:type="boolean">true</show> <timeout config:type="integer">0</timeout> </messages> <warnings> <log config:type="boolean">true</log> <show config:type="boolean">true</show> <timeout config:type="integer">0</timeout> </warnings> <yesno_messages> <log config:type="boolean">true</log> <show config:type="boolean">true</show> <timeout config:type="integer">0</timeout> </yesno_messages> </report> <runlevel> <default>3</default> </runlevel> <software> <packages config:type="list"> <package>zlib-devel</package> <package>libvorbis</package> <package>flac</package> <package>yast2-trans-en_US</package> <package>libgsm</package> <package>limal-nfs-server</package> <package>sysstat</package> <package>taglib</package> <package>libsvg-cairo</package> <package>perl-Date-Calc</package> <package>cifs-mount</package> <package>cairo-devel</package> <package>perl-TermReadKey</package> <package>perl-Digest-SHA1</package> <package>boost</package> <package>mDNSResponder-lib</package> <package>perl-DBI</package> <package>OpenEXR</package> <package>perl-X500-DN</package> <package>aalib</package> <package>aspell-en</package> <package>fontconfig-devel</package> <package>limal-nfs-server-perl</package> <package>gcc</package> <package>susehelp_en</package> <package>libgimpprint</package> <package>zypper</package> <package>pkgconfig</package> <package>unrar</package> <package>libogg</package> <package>perl-Parse-RecDescent</package> <package>perl-File-Tail</package> <package>mpt-firmware</package> <package>dmapi</package> <package>samba-client</package> <package>gtk-devel</package> <package>perl-Bit-Vector</package> <package>libmudflap</package> <package>libicu</package> <package>perl-Crypt-SmbHash</package> <package>atk-devel</package> <package>dbus-1-mono</package> <package>mono-winforms</package> <package>perl-DBD-SQLite</package> <package>xorg-x11-devel</package> <package>perl-Digest-MD4</package> <package>perl-Config-Crontab</package> <package>perl-Carp-Clan</package> <package>acct</package> <package>iso-codes</package> <package>pango-devel</package> <package>gtk2-devel</package> <package>libssui</package> <package>net-snmp</package> <package>libpng-devel</package> <package>perl-Compress-Zlib</package> <package>freetype2-devel</package> <package>libzypp-zmd-backend</package> <package>xorg-x11-Xnest</package> <package>qt-qt3support</package> <package>libnl</package> <package>libiniparser</package> <package>glib2-devel</package> <package>glitz-devel</package> <package>dbus-1-qt</package> <package>python-cairo</package> <package>perl-PlRPC</package> <package>audiofile</package> <package>esound</package> <package>update-alternatives</package> <package>makedumpfile</package> <package>glib-devel</package> <package>glibc-devel</package> <package>libsvg</package> <package>perl-Net-Daemon</package> <package>perl-URI</package> <package>perl-Config-IniFiles</package> <package>pciutils-ids</package> <package>perl-libapparmor</package> <package>perl-XML-Writer</package> <package>perl-Bootloader</package> <package>perl-TimeDate</package> <package>perl-XML-Parser</package> <package>perl-gettext</package> <package>Mesa-devel</package> <package>libgdiplus</package> </packages> <patterns config:type="list"> <pattern>Documentation</pattern> <pattern>apparmor</pattern> <pattern>gnome</pattern> <pattern>base</pattern> <pattern>x11</pattern> </patterns> <remove-packages config:type="list"> <package>sles-preparation-power_en</package> <package>sles-preparation-zseries_en</package> <package>gnome2-SuSE</package> <package>mDNSResponder</package> <package>evolution</package> <package>gnome2-SLES</package> <package>pdisk</package> <package>s390-32</package> <package>powerpc32</package> <package>s390-tools</package> <package>salinfo</package> <package>pfmon</package> <package>numactl</package> <package>linux32</package> <package>mcelog</package> <package>libpfm</package> </remove-packages> </software> <timezone> <hwclock>UTC</hwclock> <timezone>US/Eastern</timezone> </timezone> <user_defaults> <expire></expire> <group>100</group> <groups>video,dialout</groups> <home>/home</home> <inactive>-1</inactive> <shell>/bin/bash</shell> <skel>/etc/skel</skel> </user_defaults> <users config:type="list"> <user> <encrypted config:type="boolean">true</encrypted> <fullname>Games account</fullname> <gid>100</gid> <home>/var/games</home> <password_settings> <expire></expire> <flag></flag> <inact></inact> <max></max> <min></min> <warn></warn> </password_settings> <shell>/bin/bash</shell> <uid>12</uid> <user_password>*</user_password> <username>games</username> </user> <user> <encrypted config:type="boolean">true</encrypted> <fullname>bin</fullname> <gid>1</gid> <home>/bin</home> <password_settings> <expire></expire> <flag></flag> <inact></inact> <max></max> <min></min> <warn></warn> </password_settings> <shell>/bin/bash</shell> <uid>1</uid> <user_password>*</user_password> <username>bin</username> </user> <user> <encrypted config:type="boolean">true</encrypted> <fullname>nobody</fullname> <gid>65533</gid> <home>/var/lib/nobody</home> <password_settings> <expire></expire> <flag></flag> <inact></inact> <max></max> <min></min> <warn></warn> </password_settings> <shell>/bin/bash</shell> <uid>65534</uid> <user_password>*</user_password> <username>nobody</username> </user> <user> <encrypted config:type="boolean">true</encrypted> <fullname>Printing daemon</fullname> <gid>7</gid> <home>/var/spool/lpd</home> <password_settings> <expire></expire> <flag></flag> <inact></inact> <max></max> <min></min> <warn></warn> </password_settings> <shell>/bin/bash</shell> <uid>4</uid> <user_password>*</user_password> <username>lp</username> </user> <user> <encrypted config:type="boolean">true</encrypted> <fullname>Postfix Daemon</fullname> <gid>51</gid> <home>/var/spool/postfix</home> <password_settings> <expire></expire> <flag></flag> <inact></inact> <max>99999</max> <min>0</min> <warn>7</warn> </password_settings> <shell>/bin/false</shell> <uid>51</uid> <user_password>!</user_password> <username>postfix</username> </user> <user> <encrypted config:type="boolean">true</encrypted> <fullname>Novell Customer Center User</fullname> <gid>105</gid> <home>/var/lib/YaST2/suse-ncc-fakehome</home> <password_settings> <expire></expire> <flag></flag> <inact></inact> <max>99999</max> <min>0</min> <warn>7</warn> </password_settings> <shell>/bin/bash</shell> <uid>102</uid> <user_password>!</user_password> <username>suse-ncc</username> </user> <user> <encrypted config:type="boolean">true</encrypted> <fullname>FTP account</fullname> <gid>49</gid> <home>/srv/ftp</home> <password_settings> <expire></expire> <flag></flag> <inact></inact> <max></max> <min></min> <warn></warn> </password_settings> <shell>/bin/bash</shell> <uid>40</uid> <user_password>*</user_password> <username>ftp</username> </user> <user> <encrypted config:type="boolean">true</encrypted> <fullname>Gnome Display Manager daemon</fullname> <gid>104</gid> <home>/var/lib/gdm</home> <password_settings> <expire></expire> <flag></flag> <inact></inact> <max>99999</max> <min>0</min> <warn>7</warn> </password_settings> <shell>/bin/false</shell> <uid>50</uid> <user_password>!</user_password> <username>gdm</username> </user> <user> <encrypted config:type="boolean">true</encrypted> <fullname>Batch jobs daemon</fullname> <gid>25</gid> <home>/var/spool/atjobs</home> <password_settings> <expire></expire> <flag></flag> <inact></inact> <max>99999</max> <min>0</min> <warn>7</warn> </password_settings> <shell>/bin/bash</shell> <uid>25</uid> <user_password>!</user_password> <username>at</username> </user> <user> <encrypted config:type="boolean">true</encrypted> <fullname>root</fullname> <gid>0</gid> <home>/root</home> <password_settings> <expire></expire> <flag></flag> <inact></inact> <max></max> <min></min> <warn></warn> </password_settings> <shell>/bin/bash</shell> <uid>0</uid> <user_password>$2a$05$1Beaheuhg.Qz1e04/tseDu3dtH7r/cC2svGKiDeIyAxNG9O1HA20K</user_password> <username>root</username> </user> <user> <encrypted config:type="boolean">true</encrypted> <fullname>Mailer daemon</fullname> <gid>12</gid> <home>/var/spool/clientmqueue</home> <password_settings> <expire></expire> <flag></flag> <inact></inact> <max></max> <min></min> <warn></warn> </password_settings> <shell>/bin/false</shell> <uid>8</uid> <user_password>*</user_password> <username>mail</username> </user> <user> <encrypted config:type="boolean">true</encrypted> <fullname>Daemon</fullname> <gid>2</gid> <home>/sbin</home> <password_settings> <expire></expire> <flag></flag> <inact></inact> <max></max> <min></min> <warn></warn> </password_settings> <shell>/bin/bash</shell> <uid>2</uid> <user_password>*</user_password> <username>daemon</username> </user> <user> <encrypted config:type="boolean">true</encrypted> <fullname>NTP daemon</fullname> <gid>103</gid> <home>/var/lib/ntp</home> <password_settings> <expire></expire> <flag></flag> <inact></inact> <max>99999</max> <min>0</min> <warn>7</warn> </password_settings> <shell>/bin/false</shell> <uid>74</uid> <user_password>!</user_password> <username>ntp</username> </user> <user> <fullname>User for D-BUS</fullname> <gid>101</gid> <home>/var/run/dbus</home> <shell>/bin/false</shell> <uid>100</uid> </user> <user> <encrypted config:type="boolean">true</encrypted> <fullname>Unix-to-Unix CoPy system</fullname> <gid>14</gid> <home>/etc/uucp</home> <password_settings> <expire></expire> <flag></flag> <inact></inact> <max></max> <min></min> <warn></warn> </password_settings> <shell>/bin/bash</shell> <uid>10</uid> <user_password>*</user_password> <username>uucp</username> </user> <user> <fullname>User for haldaemon</fullname> <gid>102</gid> <home>/var/run/hal</home> <shell>/bin/false</shell> <uid>101</uid> </user> <user> <encrypted config:type="boolean">true</encrypted> <fullname>WWW daemon apache</fullname> <gid>8</gid> <home>/var/lib/wwwrun</home> <password_settings> <expire></expire> <flag></flag> <inact></inact> <max></max> <min></min> <warn></warn> </password_settings> <shell>/bin/false</shell> <uid>30</uid> <user_password>*</user_password> <username>wwwrun</username> </user> <user> <encrypted config:type="boolean">true</encrypted> <fullname>Manual pages viewer</fullname> <gid>62</gid> <home>/var/cache/man</home> <password_settings> <expire></expire> <flag></flag> <inact></inact> <max></max> <min></min> <warn></warn> </password_settings> <shell>/bin/bash</shell> <uid>13</uid> <user_password>*</user_password> <username>man</username> </user> <user> <encrypted config:type="boolean">true</encrypted> <fullname>News system</fullname> <gid>13</gid> <home>/etc/news</home> <password_settings> <expire></expire> <flag></flag> <inact></inact> <max></max> <min></min> <warn></warn> </password_settings> <shell>/bin/bash</shell> <uid>9</uid> <user_password>*</user_password> <username>news</username> </user> <user> <encrypted config:type="boolean">true</encrypted> <fullname>SSH daemon</fullname> <gid>65</gid> <home>/var/lib/sshd</home> <password_settings> <expire></expire> <flag></flag> <inact></inact> <max>99999</max> <min>0</min> <warn>7</warn> </password_settings> <shell>/bin/false</shell> <uid>71</uid> <user_password>!</user_password> <username>sshd</username> </user> </users> <x11> <color_depth>16</color_depth> <display_manager>gdm</display_manager> <enable_3d config:type="boolean">false</enable_3d> <monitor> <display> <max_hsync config:type="integer">38</max_hsync> <max_vsync config:type="integer">60</max_vsync> <min_hsync config:type="integer">31</min_hsync> <min_vsync config:type="integer">50</min_vsync> </display> <monitor_device>800X600@60HZ</monitor_device> <monitor_vendor>--> VESA</monitor_vendor> </monitor> <resolution>800x600 (SVGA)</resolution> <window_manager>gnome</window_manager> </x11> </profile> -- To unsubscribe, e-mail: opensuse-autoinstall+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-autoinstall+help(a)opensuse.org

2 2

[opensuse-autoinstall] postinstall script output
by Babarovic Ivica 22 Aug '09

22 Aug '09

Hello! Is it possible to see output on stdout and stderr of the script without the user confirmation via feddback tag? best regards -- Babarovic Ivica, R&D Engineer ivica.babarovic(a)asist.si ASIST avtomatizacija sistemov d.o.o. www.asist.si Cesta Ljubljanske brigade 23a Phone: +386 15837217 Ljubljana, Slovenija Fax: +386 15837210 -- To unsubscribe, e-mail: opensuse-autoinstall+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-autoinstall+help(a)opensuse.org

3 2

[opensuse-autoinstall] Install all packages via autoyast.
by Ajay Mulwani 22 Aug '09

22 Aug '09

Hi, What is the syntax in autoinst.xml to install ALL packages of the media (sles10 and sles11). In RedHat Linux "@Everything" directive in ks.cfg does this job. Is there something similar available? Thanks, Ajay -- To unsubscribe, e-mail: opensuse-autoinstall+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-autoinstall+help(a)opensuse.org

7 9

[opensuse-autoinstall] Exporting users during installation
by Leonardo L. P. da Mata 18 Aug '09

18 Aug '09

Hello, I need to clone the installation information to be used with autoyast. there is a module called AutoinstClone that can export this information, it reads the Profile::current data and exports this information using XML::YCPToXMLFile module. This profile contains an entry for users, but this entry only contains the root user, if i create one user called "leonardo" during the installation it doesn't appear in this profile. Does anyone knows how to export the information about this initial user created during installation? i need to create this autoyast file automatic, i really need to do it during the installation process without user interference. Thank you -- Leonardo Luiz Padovani da Mata barroca(a)gmail.com "May the force be with you, always" "Nerd Pride... eu tenho. Voce tem?" -- To unsubscribe, e-mail: opensuse-autoinstall+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-autoinstall+help(a)opensuse.org

2 4

[opensuse-autoinstall] Bug with partitioning in autoyast
by Leonardo L. P. da Mata 12 Aug '09

12 Aug '09

Hello, i'm testing the partitioning with autoyast and i maybe found a bug. if i use the partitioning like this, the partitioning system respects the decisions to delete or keep partitions: <partitioning xmlns="http://www.suse.com/1.0/yast2ns" type="list" > <drive xmlns="http://www.suse.com/1.0/yast2ns"> <device xmlns="http://www.suse.com/1.0/yast2ns">/dev/sda</device> <initialize xmlns="http://www.suse.com/1.0/yast2ns" config:type="boolean" xmlns:config="http://www.suse.com/1.0/configns" >true</initialize> <partitions xmlns="http://www.suse.com/1.0/yast2ns" config:type="list" xmlns:config="http://www.suse.com/1.0/configns" > <partition xmlns="http://www.suse.com/1.0/yast2ns"> <create xmlns="http://www.suse.com/1.0/yast2ns" config:type="boolean" xmlns:config="http://www.suse.com/1.0/configns" >false</create> <filesystem xmlns="http://www.suse.com/1.0/yast2ns" config:type="symbol" xmlns:config="http://www.suse.com/1.0/configns" >swap</filesystem> <format xmlns="http://www.suse.com/1.0/yast2ns" config:type="boolean" xmlns:config="http://www.suse.com/1.0/configns" >false</format> <loop_fs xmlns="http://www.suse.com/1.0/yast2ns" config:type="boolean" xmlns:config="http://www.suse.com/1.0/configns" >false</loop_fs> <mount xmlns="http://www.suse.com/1.0/yast2ns">swap</mount> <mountby xmlns="http://www.suse.com/1.0/yast2ns" config:type="symbol" xmlns:config="http://www.suse.com/1.0/configns" >device</mountby> <resize xmlns="http://www.suse.com/1.0/yast2ns" config:type="boolean" xmlns:config="http://www.suse.com/1.0/configns" >true</resize> <size xmlns="http://www.suse.com/1.0/yast2ns">auto</size> </partition> <partition xmlns="http://www.suse.com/1.0/yast2ns"> <create xmlns="http://www.suse.com/1.0/yast2ns" config:type="boolean" xmlns:config="http://www.suse.com/1.0/configns" >false</create> <crypt_fs xmlns="http://www.suse.com/1.0/yast2ns" config:type="boolean" xmlns:config="http://www.suse.com/1.0/configns" >false</crypt_fs> <filesystem xmlns="http://www.suse.com/1.0/yast2ns" config:type="symbol" xmlns:config="http://www.suse.com/1.0/configns" >ext3</filesystem> <format xmlns="http://www.suse.com/1.0/yast2ns" config:type="boolean" xmlns:config="http://www.suse.com/1.0/configns" >false</format> <label xmlns="http://www.suse.com/1.0/yast2ns">RECOVER</label> <loop_fs xmlns="http://www.suse.com/1.0/yast2ns" config:type="boolean" xmlns:config="http://www.suse.com/1.0/configns" >false</loop_fs> <mount xmlns="http://www.suse.com/1.0/yast2ns">/recover</mount> <mountby xmlns="http://www.suse.com/1.0/yast2ns" config:type="symbol" xmlns:config="http://www.suse.com/1.0/configns" >label</mountby> <resize xmlns="http://www.suse.com/1.0/yast2ns" config:type="boolean" xmlns:config="http://www.suse.com/1.0/configns" >false</resize> </partition> <partition xmlns="http://www.suse.com/1.0/yast2ns"> <create xmlns="http://www.suse.com/1.0/yast2ns" config:type="boolean" xmlns:config="http://www.suse.com/1.0/configns" >true</create> <crypt_fs xmlns="http://www.suse.com/1.0/yast2ns" config:type="boolean" xmlns:config="http://www.suse.com/1.0/configns" >false</crypt_fs> <filesystem xmlns="http://www.suse.com/1.0/yast2ns" config:type="symbol" xmlns:config="http://www.suse.com/1.0/configns" >ext3</filesystem> <format xmlns="http://www.suse.com/1.0/yast2ns" config:type="boolean" xmlns:config="http://www.suse.com/1.0/configns" >true</format> <label xmlns="http://www.suse.com/1.0/yast2ns">ROOT</label> <loop_fs xmlns="http://www.suse.com/1.0/yast2ns" config:type="boolean" xmlns:config="http://www.suse.com/1.0/configns" >false</loop_fs> <mount xmlns="http://www.suse.com/1.0/yast2ns">/</mount> <mountby xmlns="http://www.suse.com/1.0/yast2ns" config:type="symbol" xmlns:config="http://www.suse.com/1.0/configns" >label</mountby> <resize xmlns="http://www.suse.com/1.0/yast2ns" config:type="boolean" xmlns:config="http://www.suse.com/1.0/configns" >true</resize> <size xmlns="http://www.suse.com/1.0/yast2ns">10G</size> </partition> <partition xmlns="http://www.suse.com/1.0/yast2ns"> <create xmlns="http://www.suse.com/1.0/yast2ns" config:type="boolean" xmlns:config="http://www.suse.com/1.0/configns" >true</create> <crypt_fs xmlns="http://www.suse.com/1.0/yast2ns" config:type="boolean" xmlns:config="http://www.suse.com/1.0/configns" >false</crypt_fs> <filesystem xmlns="http://www.suse.com/1.0/yast2ns" config:type="symbol" xmlns:config="http://www.suse.com/1.0/configns" >ext3</filesystem> <format xmlns="http://www.suse.com/1.0/yast2ns" config:type="boolean" xmlns:config="http://www.suse.com/1.0/configns" >true</format> <label xmlns="http://www.suse.com/1.0/yast2ns">HOME</label> <loop_fs xmlns="http://www.suse.com/1.0/yast2ns" config:type="boolean" xmlns:config="http://www.suse.com/1.0/configns" >false</loop_fs> <mount xmlns="http://www.suse.com/1.0/yast2ns">/home</mount> <mountby xmlns="http://www.suse.com/1.0/yast2ns" config:type="symbol" xmlns:config="http://www.suse.com/1.0/configns" >label</mountby> <resize xmlns="http://www.suse.com/1.0/yast2ns" config:type="boolean" xmlns:config="http://www.suse.com/1.0/configns" >true</resize> <size xmlns="http://www.suse.com/1.0/yast2ns">max</size> </partition> </partitions> <pesize xmlns="http://www.suse.com/1.0/yast2ns"/> <type xmlns="http://www.suse.com/1.0/yast2ns" config:type="symbol" xmlns:config="http://www.suse.com/1.0/configns" >CT_DISK</type> <use xmlns="http://www.suse.com/1.0/yast2ns">all</use> </drive> </partitioning> But if i remove all the tags xmlns="http://www.suse.com/1.0/yast2ns"/ xmlns:config="http://www.suse.com/1.0/configns", the autoyast doesn't respect my decisions and delete all the partitions. For instance, the second way is the way that AutoinstClone::Write outputs the infomation about partittioning added with: map partitions = "partitioning":[$["device":"/dev/sda", "initialize":true, "partitions":[$["create":true, "crypt_fs":false, "filesystem":`swap, "format":true, "loop_fs":false, "mount":"swap", "mountby":`device, "partition_id":130, "partition_nr":5, "resize":false, "size":"781337088"], $["create":true, "crypt_fs":false, "filesystem":`ext3, "format":true, "loop_fs":false, "mount":"/recover", "mountby":`device, "partition_id":131, "partition_nr":6, "resize":false, "size":"10733957632"], $["create":true, "crypt_fs":false, "filesystem":`ext3, "format":true, "loop_fs":false, "mount":"/", "mountby":`device, "partition_id":131, "partition_nr":7, "resize":false, "size":"10733957632"], $["create":true, "crypt_fs":false, "filesystem":`ext3, "format":true, "loop_fs":false, "mount":"/home", "mountby":`device, "partition_id":131,"partition_nr":8, "resize":false, "size":"20661871104"]], "pesize":"", "type":`CT_DISK, "use":"all"]] Profile::current = add(Profile::current, "partitioning",partitions); Thanks -- Leonardo Luiz Padovani da Mata barroca(a)gmail.com "May the force be with you, always" "Nerd Pride... eu tenho. Voce tem?" -- To unsubscribe, e-mail: opensuse-autoinstall+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-autoinstall+help(a)opensuse.org

2 3

[opensuse-autoinstall] merging of <package> doesn't work
by Frank Steiner 11 Aug '09

11 Aug '09

Hi, I'm adding two profiles in rules.xml, both contain <packages> and <remove-packages> entries (and addon produtcs). I'm adding the second profile as: <rule> ... <result> <profile>profiles/sled-only.xml</profile> <continue config:type="boolean">true</continue> <dont_merge config:type="list"> <element>listentry</element> <element>package</element> </dont_merge> </result> </rule> Merging of the two add_on_product listentries works fine, but the packages are not merged. E.g. I have <packages config:type="list"> <package>sendmail</package> </packages> in the first profile and <packages config:type="list"> <package>lilo</package> </packages> in the sled-only.xml. But lilo is not added and in y2log I see only "software":$["packages":["sendmail"]] although at some point earlier I find AutoInstallRules.ycp:590 user defined dont_merge for rules found. dontmerge is ["listentry", "package"] When merge the two xml files manually according to your blog, i.e. with /usr/bin/xsltproc --novalid --param replace "'false'" --param dontmerge1 "'package'" --param with "'sled-only.xml'" --output out.xml /usr/share/autoinstall/xslt/merge.xslt lmu.xml then out.xml contains the merge: <ns1:packages config:type="list"> <package>sendmail</package><package>lilo</package> </ns1:packages> Am I doing sth. wrong? cu, Frank -- Dipl.-Inform. Frank Steiner Web: http://www.bio.ifi.lmu.de/~steiner/ Lehrstuhl f. Bioinformatik Mail: http://www.bio.ifi.lmu.de/~steiner/m/ LMU, Amalienstr. 17 Phone: +49 89 2180-4049 80333 Muenchen, Germany Fax: +49 89 2180-99-4049 * Rekursion kann man erst verstehen, wenn man Rekursion verstanden hat. * -- To unsubscribe, e-mail: opensuse-autoinstall+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-autoinstall+help(a)opensuse.org

3 6

[opensuse-autoinstall] ssh hosts keys imported
by Martin Vogt 10 Aug '09

10 Aug '09

Hello list, today I wondered why after an installation I didnt get the "ssh host key changed" when slogin in a newly installed system. Does autoyast keeps the keys from a previously installed system? At least it looks like that, because the keys are some month old. Where is this configured? Martin -- To unsubscribe, e-mail: opensuse-autoinstall+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-autoinstall+help(a)opensuse.org

2 1

[opensuse-autoinstall] Installation Problems with pxeboot and dhcpcd
by Georg Wallner 07 Aug '09

07 Aug '09

Hallo, i get trouble with automatic installation. pxeboot get an ip address by dhcp server and is downloading the linux kernel and initrd. After booting the install kernel the dhcpcd failed because of deactivating the networkcard. The network module is succesfully loaded. If i do installing by dvd and typing in: install=http... and autoyast=http... everything is working well. The installloader get an Ip by dhcp server. The linux kernel and initrd are the same on dvd and in the /tftpboot folder. Please give me some hints. Greeting Georg -- To unsubscribe, e-mail: opensuse-autoinstall+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-autoinstall+help(a)opensuse.org

3 5

[opensuse-autoinstall] running zypper in postinstall scripts
by Magyari, Miklos 05 Aug '09

05 Aug '09

hi, I try to run zypper in our postinstall scripts, but it always fail with: "System management is locked by the application with pid 5141 (y2base)." Does it mean that zypper cannot be used in autoyast postinstall by design or am I doing something wrong? thanks, Miki -- To unsubscribe, e-mail: opensuse-autoinstall+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-autoinstall+help(a)opensuse.org

2 2