November 2007 - openSUSE Autoinstall - openSUSE Mailing Lists

linuxrc - netdevice=<hwaddress>
by John Willis 18 Dec '12

18 Dec '12

Does anyone know if any of the SLES releases 9 or 10 support passing the linuxrc option netdevice=<hardware mac address> ? I noticed Red Hat has had this for sometime and it seems totally missing in SuSE which seems really odd. I'm still scratching my head if we really are still passing only by kernel interface name. I read in the change log for linuxrc-1.8.6-3 a change that "sounds" like this feature. * Mon Mar 14 2005 - snwint(a)suse.de - s390: fix segfault in net_list_s390_devs() - extra root image was sometimes not used - allow netdevices to be specified by hwaddress But it looks like linuxrc-1.8.6-3 is only available in SuSE Professional 9.3. "any" commentary would be sincerely appreciated the feature also seems to be fairly minor since any delimiter seperating the octets in the hwaddr string could be used to identify the difference between an interface name and interface hw address if i could figure out a generic method of overriding the linuxrc with a custom script and daisy chain it back into linuxrc after setting up the interface name, I would.. and have a slight idea on how to do that.. but i'd rather find out i'm just missing something and the feature is already there Thanks!

3 2

RE: [suse-autoinstall] SLES 10 RC2 remove-packages section?
by Matt Gillard 05 Mar '08

05 Mar '08

I dont have kinternet installed. This is what doesnt seem to work: <software> <patterns config:type="list"> <pattern>default</pattern> <pattern>Basis-Devel</pattern> <pattern>x11</pattern> </patterns> <packages config:type="list"> <packages>perl-libwww-perl</packages> <packages>net-snmp</packages> <packages>kernel-source</packages> </packages> <remove-packages config:type="list"> <packages>pptp</packages> <packages>smpppd</packages> <packages>ppp</packages> <packages>wvdial</packages> <packages>mutt</packages> </remove-packages> </software> In y2log it mentions that those packages should be removed, but it goes ahead and installs them anyway. I can do it manually on the command line: # rpm -e pptp smpppd ppp wvdial mutt and that works fine so I know I have no dependency problems. matt > -----Original Message----- > From: Uwe Gansert [mailto:ug@suse.de] > Sent: Friday, 30 June 2006 12:50 AM > To: suse-autoinstall(a)suse.com > Subject: Re: [suse-autoinstall] SLES 10 RC2 remove-packages section? > > > On Thursday 29 June 2006 16:45, Manfred Hollstein wrote: > > > If that fails, you have kinternet installed; add that to > the list and it > > should work. > > good point. > <remove-packages> can not break dependencies and so it's very > likely that > there is still a package that needs those packages. > I did a very small installation with no X - so it worked for me. > > -- > ciao, Uwe Gansert > > Uwe Gansert, Server Technologies Team > SUSE LINUX Products GmbH, Maxfeldstrasse 5, D-90409 Nuernberg, Germany > Fax: +49-(0)911-74053-476, Web: http://www.suse.de/~ug > now playing Covenant - Wasteland > > -- > To unsubscribe, e-mail: suse-autoinstall-unsubscribe(a)suse.com > For additional commands, e-mail: suse-autoinstall-help(a)suse.com > > This email and any attachments may contain privileged and confidential information and are intended for the named addressee only. If you have received this e-mail in error, please notify the sender and delete this e-mail immediately. Any confidentiality, privilege or copyright is not waived or lost because this e-mail has been sent to you in error. It is your responsibility to check this e-mail and any attachments for viruses. No warranty is made that this material is free from computer virus or any other defect or error. Any loss/damage incurred by using this material is not the sender's responsibility. The sender's entire liability will be limited to resupplying the material.

4 6

[opensuse-autoinstall] fetch profile via nfs in 10.3
by Ulrich Hoelscher 29 Jan '08

29 Jan '08

Hi, in 10.2 I deploy the autoyast profiles via nfs, this works out of the box. To use it I call autoyast=nfs://.../autoinst.xml If i try it with 10.3 this is not possible. The installation sources are also deployed via nfs, which works fine. After starting the installation in autoyast mode it not possible to mount the nfs share. The reason is the locks can not be handled. As a work around I use http to deploy the profiles and nfs to deploy the rpms. Is this a bug or a desired feature? regards Ulrich -- To unsubscribe, e-mail: opensuse-autoinstall+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-autoinstall+help(a)opensuse.org

4 5

[opensuse-autoinstall] Problem with fetch profile via nfs in 10.3
by Vincent David 10 Dec '07

10 Dec '07

Hi, I'm posting this as a follow-up to older posts I found on the mailing- list archives regarding problems with nfs during the autoinstall procedure (and possibly related topics) with 10.3. The posts I'm referring to are: http://lists.opensuse.org/opensuse-autoinstall/2007-10/msg00031.html http://lists.opensuse.org/opensuse-autoinstall/2007-10/msg00007.html and possibly: http://lists.opensuse.org/opensuse-autoinstall/2007-10/msg00010.html I found a solution to start the nfs-mount manually and described this in: http://forums.suselinuxsupport.de/index.php?act=ST&f=20&t=63305 However, this is merely a workaround and identifies the source of the problem, while I still don't know how to automize this in a fashion, such that the autoinstallation procedure runs clean without stopping and returning errors in between. Furthermore I do understand, from what a learned from the first mentioned reference, that Uwe Gansert already has a solution to this problem. I would be very interested in learning more about this, since I unfortunately couldn't find any description of such a solution. many thanks Vincent David -- To unsubscribe, e-mail: opensuse-autoinstall+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-autoinstall+help(a)opensuse.org

5 6

[opensuse-autoinstall] How to use <ask> statements in autoyast?
by Hougaard 04 Dec '07

04 Dec '07

Hi I've been looking over the documentation for <ask> at http://newsportal.novell.com/article.php?id=1565&group=novell.support.sles.… - but it leave's me with several questions (sorry for my ignorance, I'm new to all this autoyast stuff ;) ) - if I use the "<file>/tmp/answer_hostname</file>", what is the format of the answer file?? just an empty text file with the answer or? - what about the value to be exchanged? should it be empty, or will any predefined value be exchanged with the one asked for? - Will it be possible to answer serveral "paths" with the same question?? eg. below <ask> <path>arkmanager,dbpassword</path> <path>ca_mgm,password</path> <question>Type Password</question> <stage>initial</stage> <default>Type in your password here</default> </ask> or is there, a more clever solution to such a question? - How about the password... is it possible to get this read from an clear text string? (I'm installing OES2, and there are several passwords and some are written in clear text, and some ain't) regards Flemming (Terribly sorry if my post occurs twice, haven't noticed the no HTML part at first) -- To unsubscribe, e-mail: opensuse-autoinstall+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-autoinstall+help(a)opensuse.org

3 7

[opensuse-autoinstall] is it possible to install latest SLES 10 SP1 patches during autoinstall?
by Chris Partridge 19 Nov '07

19 Nov '07

I am using SLES 10 SP1 and AutoYaST. I have my autoyast profile setup to configure Novell Customer Center with the correct registration code and I verified that my server gets registered with NCC. Now I'd like to have AutoYaST install all the latest patches at the appropriate place during auto-installation. Is this possible? Thanks, Chris -- To unsubscribe, e-mail: opensuse-autoinstall+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-autoinstall+help(a)opensuse.org

6 5

[opensuse-autoinstall] Ask-list... wrong answers on combined dialogs?
by Lundgren, Andrew 19 Nov '07

19 Nov '07

First, thanks for the help on figuring out how to create an ask-list. I have it working now. I am asking several questions on install that are related. When I have each question in it's own dialog everything is working great. As the questions are related I want to put them in grouped dialog boxes. When I do this, I seem to be getting corrupted answers. I grouped them by simply adding the dialog key to each stand alone question set. My ask section looks like this: <ask-list config:type="list"> <ask> <dialog config:type="integer">1</dialog> <path>networking,dns,hostname</path> <question>Enter Hostname (without domain)</question> <stage>cont</stage> <default></default> </ask> <ask> <dialog config:type="integer">1</dialog> <path>networking,dns,domain</path> <question>Enter Domain (ex: level3.net)</question> <stage>cont</stage> <default></default> </ask> <ask> <dialog config:type="integer">2</dialog> <path>networking,interfaces,0,ipaddr</path> <question>Enter IPv4 address</question> <stage>cont</stage> </ask> <ask> <dialog config:type="integer">2</dialog> <path>networking,interfaces,0,netmask</path> <question>Enter netmask </question> <stage>cont</stage> <default>255.255.255.0</default> </ask> <ask> <dialog config:type="integer">2</dialog> <path>networking,routing,routes,0,gateway</path> <question>Enter default IPv4 gateway</question> <stage>cont</stage> </ask> ... Anything jump out as a problem? I am seeing the 1st answer come out correct, but the subsequent ones do not... Thanks! -- Andrew -- To unsubscribe, e-mail: opensuse-autoinstall+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-autoinstall+help(a)opensuse.org

3 4

[opensuse-autoinstall] Error: Failed to add add-on product
by Razi Khaja 19 Nov '07

19 Nov '07

Im tring to create a virtual machine using Xen in openSUSE 10.3 using the Xen Virtual Machine Manager in Yast. In creating the virtual machine, I specify the location of the 10.3 (32 bit) iso and the location of the autoyast profile in the appropriate text boxes. In my autoyast profile, I specify the add-on repositories I would like to add. Below are portions of the autoyast xml profile. After the autoyast installer runs, and the virtual machine boots, I look in Yast2->Software->Software Repositories to find that the add-on repositories have not been added. Without the <signature-handling> stanza inside of <add_on_products>, no error dialog is produced during, but after installation finishes, the repositories are not available. With the <signature-handling> stanza inside of <add_on_products> an error dialog appears saying "Error: Failed to add add-on product". I have read section "4.5.4. Installing additional and customized Packages" in the autoyast documentation at: http://forgeftp.novell.com/yast/doc/SL10.3/autoinstall/CreateProfile.Softwa… and believe that I am following the instructions correctly. Is there something clearly wrong with my profile? How can I fix it so that my add-on repositories are available once the installation is complete? <?xml version="1.0"?> <!DOCTYPE profile> <profile xmlns="http://www.suse.com/1.0/yast2ns" xmlns:config="http://www.suse.com/1.0/configns"> <add-on> <add_on_products config:type="list"> <listentry> <media_url>http://download.opensuse.org/repositories/openSUSE:/Tools/openSUSE_10.3/</media_url> <product>Build Service Repository</product> <product_dir>/</product_dir> </listentry> <listentry> <media_url>http://download.opensuse.org/repositories/ruby/openSUSE_10.3/</media_url> <product>Ruby Repository</product> <product_dir>/</product_dir> </listentry> <signature-handling> <accept_file_without_checksum config:type="boolean">true</accept_file_without_checksum> <accept_non_trusted_gpg_key config:type="boolean">true</accept_non_trusted_gpg_key> <accept_unknown_gpg_key config:type="boolean">true</accept_unknown_gpg_key> <accept_unsigned_file config:type="boolean">true</accept_unsigned_file> <accept_verification_failed config:type="boolean">true</accept_verification_failed> <import_gpg_key config:type="boolean">true</import_gpg_key> </signature-handling> </add_on_products> </add-on> ..... some xml ... <general> ..... some xml ... <signature-handling> <accept_file_without_checksum config:type="boolean">true</accept_file_without_checksum> <accept_non_trusted_gpg_key config:type="boolean">true</accept_non_trusted_gpg_key> <accept_unknown_gpg_key config:type="boolean">true</accept_unknown_gpg_key> <accept_unsigned_file config:type="boolean">true</accept_unsigned_file> <accept_verification_failed config:type="boolean">true</accept_verification_failed> <import_gpg_key config:type="boolean">true</import_gpg_key> </signature-handling> </general> ..... more xml ... -- To unsubscribe, e-mail: opensuse-autoinstall+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-autoinstall+help(a)opensuse.org

1 0

[opensuse-autoinstall] unsubscribe opensuse-autoinstall@opensuse.org
by Hans Ragas 19 Nov '07

19 Nov '07

unsubscribe opensuse-autoinstall(a)opensuse.org -- This e-mail is intended exclusively for the addressee(s), and may not be passed on to, or made available for use by any person other than the addressee(s). Siennax rules out any and every liability resulting from any electronic transmission. -- To unsubscribe, e-mail: opensuse-autoinstall+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-autoinstall+help(a)opensuse.org

2 1

[opensuse-autoinstall] Update Bug
by Heinz Diehl 16 Nov '07

16 Nov '07

Hi, autoupdater on a opensuse 10.3 64 bit system has just uninstalled libzypp and zypper on my system, caused by an autoupdate of boost, which has unsolved dependencies. That's quite bad, because anyone who's new to linux is left without the possibility of easy software installation. > #### YaST2 conflicts list - generated 2007-11-16 21:11:38 #### > > Can't satisfy requirement libboost_filesystem.so.1.33.1()(64bit) for libzypp-3.26.3-1.1.x86_64 > > === libzypp-3.26.3-1.1.x86_64 === > boost-1.33.1-108.x86_64 provides libboost_filesystem.so.1.33.1()(64bit), but is scheduled to be uninstalled. > boost-1.33.1-108.x86_64[http://download.opensuse.org/repositories/openSUSE:… provides libboost_filesystem.so.1.33.1()(64bit), but another version of that package is already installed. > libzypp-3.26.3-1.1.x86_64 depends on boost > libzypp-3.26.3-1.1.x86_64 is lacking the requirement libboost_filesystem.so.1.33.1()(64bit) > (null) > Conflict Resolution: > ( ) delete libzypp > ( ) Ignore this requirement just here > ( ) Generally ignore this requirement > Can't satisfy requirement libboost_regex.so.1.33.1()(64bit) for zypper-0.8.25-0.1.x86_64 > > === zypper-0.8.25-0.1.x86_64 === > boost-1.33.1-108.x86_64 provides libboost_regex.so.1.33.1()(64bit), but is scheduled to be uninstalled. > boost-1.33.1-108.x86_64[http://download.opensuse.org/repositories/openSUSE:… provides libboost_regex.so.1.33.1()(64bit), but another version of that package is already installed. > zypper-0.8.25-0.1.x86_64 depends on boost > zypper-0.8.25-0.1.x86_64 is lacking the requirement libboost_regex.so.1.33.1()(64bit) > (null) > Conflict Resolution: > ( ) delete zypper > ( ) Ignore this requirement just here > ( ) Generally ignore this requirement > No valid solution found with just resolvables of best architecture. > With this run only resolvables with the best architecture have been regarded. > Regarding all possible resolvables takes time, but can come to a valid result. > Conflict Resolution: > ( ) Make a solver run with ALL possibilities. > > #### YaST2 conflicts list END ### -- To unsubscribe, e-mail: opensuse-autoinstall+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-autoinstall+help(a)opensuse.org

2 1

[opensuse-autoinstall] Is it possible to install patterns in stage2?
by Razi Khaja 16 Nov '07

16 Nov '07

I have read that there is a <post-packages config:type="list"> element to enable installation of packages after the reboot during stage 2. Is there also a <post-patterns config:type="list"> tag to enable installation of patterns in stage 2? How difficult would it be to implement this? -- To unsubscribe, e-mail: opensuse-autoinstall+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-autoinstall+help(a)opensuse.org

3 3

[opensuse-autoinstall] Would like to create a single frametitle around 2 questions with <ask>
by Razi Khaja 16 Nov '07

16 Nov '07

Ive created a reference profile for my system using the Autoinstallation module in Yast2 and added the xml below in the <general> section. When running an installation using autoyast, a dialog appears showing 2 frametitles surrounding each question's textbox. How would one go about creating a single frametitle surrounding both questions? <ask-list config:type="list"> <ask> <stage>initial</stage> <title>My Server Customization</title> <dialog config:type="integer">1</dialog> <element config:type="integer">1</element> <frametitle>Hostname and Domain Name</frametitle> <help>1. Enter the hostname of the server. </help> <question>1. Hostname</question> <path>networking,dns,hostname</path> <default>test</default> </ask> <ask> <stage>initial</stage> <title>My Server Customization</title> <dialog config:type="integer">1</dialog> <element config:type="integer">2</element> <frametitle>Hostname and Domain Name</frametitle> <help>2. Enter the domain name of the server. </help> <question>2. Domain Name</question> <path>networking,dns,domain</path> <default>mydomain.com</default> </ask> </ask-list> -- To unsubscribe, e-mail: opensuse-autoinstall+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-autoinstall+help(a)opensuse.org

2 2

[opensuse-autoinstall] sled10-sp1 installing -smp and -default kernel for some reason
by Mike Marion 16 Nov '07

16 Nov '07

No <kernel> directive in software setup.. in 99.99% (just guessing) of the cases, the installation does the right thing in determining -default or -smp kernel. In a few rare cases, -default goes on when it shouldn't, haven't been able to determine why. One remote office seeing it happen on a handful of HP xw6400's now, whereas I've only seen it happen when I've been testing in lab, and usually same host installs -smp correctly on a rejump. Logs seem to indicate it's doing the right thing: 2007-11-06 14:27:48 <1> $machine_ip(3655) [YCP] Kernel.ycp:352 ProbeKernel: SMP board 2007-11-06 14:27:48 <1> $machine_ip(3655) [YCP] Kernel.ycp:358 Detected XEN: false 2007-11-06 14:27:48 <1> $machine_ip(3655) [YCP] Arch.ycp:378 stat /proc/xen: $[] 2007-11-06 14:27:48 <1> $machine_ip(3655) [YCP] Kernel.ycp:499 ProbeKernel determined: ["kernel-smp"] Logs show the -smp kernel installing: 2007-11-06 09:28:01 <1> $machine_ip(3655) [YCP] Kernel.ycp:550 Selecting 'kernel-smp' as kernel package 2007-11-06 09:28:01 <1> $machine_ip(3655) [wfm] Kernel.ycp:565 Pkg Builtin called: IsAvailable 2007-11-06 09:28:01 <1> $machine_ip(3655) [wfm] Package.cc(IsAvailable):533 IsAvailable called 2007-11-06 09:28:01 <1> $machine_ip(3655) [YCP] Kernel.ycp:606 Packages for base kernel-smp: ["kernel-smp"] 2007-11-06 09:28:01 <1> $machine_ip(3655) [YCP] Kernel.ycp:640 Computed kernel packages: ["kernel-smp"] 2007-11-06 09:28:01 <1> $machine_ip(3655) [YCP] AutoinstSoftware.ycp:441 Packages selected in autoinstall mode: ["patch", <SNIP> "kernel-source", "kernel-smp", "yast2-nis-client", "ypbind"] 2007-11-06 09:28:01 <1> $machine_ip(3655) [wfm] AutoinstSoftware.ycp:445 Pkg Builtin called: DoProvide 2007-11-06 09:28:01 <1> $machine_ip(3655) [YCP] AutoinstSoftware.ycp:445 Installing individual packages: $[] 2007-11-06 09:28:01 <1> $machine_ip(3655) [YCP] Packages.ycp:485 Installation mode packages: [] 2007-11-06 09:28:01 <1> $machine_ip(3655) [YCP] Storage.ycp:4027 AddPackageList have_lvm false mount_lvm false need_evms false 2007-11-06 09:28:01 <1> $machine_ip(3655) [YCP] Storage.ycp:4038 AddPackageList ret [] 2007-11-06 09:28:01 <1> $machine_ip(3655) [YCP] Kernel.ycp:550 Selecting 'kernel-smp' as kernel package 2007-11-06 09:28:01 <1> $machine_ip(3655) [wfm] Kernel.ycp:565 Pkg Builtin called: IsAvailable Later it installs ok: 2007-11-06 09:45:35 <0> $machine_ip(3655) [zypp] ExternalProgram.cc(start_program):172 Executing 'rpm' '--root' '/mnt' '--dbpath' '/var/lib/rpm' '-U' '--percent' '--' '/mnt/var/tmp/AP_0x00000002/suse/x86_64/kernel-smp-2.6.16.46-0.13.x86_64.rpm' 2007-11-06 09:45:35 <0> $machine_ip(3655) [zypp] ExternalProgram.cc(start_program):283 pid 10166 launched 2007-11-06 09:45:41 <0> $machine_ip(3655) [zypp] ExternalProgram.cc(checkStatus):336 pid 10166 successfully completed Then, for some reason, -default installs too: 2007-11-06 09:45:41 <1> $machine_ip(3655) [source] PackageProvider.cc(providePackage):80 provide Package [S1:1][package]kernel-default-2.6.16.46-0.13.x86_64 2007-11-06 09:45:41 <1> $machine_ip(3655) [source] SourceProvideFile.cc(provideFile):99 sourceProvideFile [1]/suse/x86_64/kernel-default-2.6.16.46-0.13.x86_64.rpm{16.0 M|NoCheckSum} 2007-11-06 09:45:41 <0> $machine_ip(3655) [source] SourceImpl.cc(provideJustFile):510 Going to try provide file /suse/x86_64/kernel-default-2.6.16.46-0.13.x86_64.rpm from 1 2007-11-06 09:45:41 <0> $machine_ip(3655) [media] MediaManager.cc(checkDesired):116 checkDesired(1): desired (cached) 2007-11-06 09:45:41 <0> $machine_ip(3655) [media] MediaHandler.cc(provideFile):1008 provideFile(/suse/x86_64/kernel-default-2.6.16.46-0.13.x86_64.rpm) 2007-11-06 09:45:41 <2> $machine_ip(3655) [source] SourceProvideFile.cc(provideFile):115 No checksum in metadata [1]/suse/x86_64/kernel-default-2.6.16.46-0.13.x86_64.rpm{16.0 M|NoCheckSum} 2007-11-06 09:45:41 <1> $machine_ip(3655) [source] SourceProvideFile.cc(provideFile):141 sourceProvideFile at /mnt/var/tmp/AP_0x00000002/suse/x86_64/kernel-default-2.6.16.46-0.13.x86_64.rpm 2007-11-06 09:45:41 <1> $machine_ip(3655) [source] PackageProvider.cc(providePackage):101 provided Package [S1:1][package]kernel-default-2.6.16.46-0.13.x86_64 at /mnt/var/tmp/AP_0x00000002/suse/x86_64/kernel-default-2.6.16.46-0.13.x86_64.rpm 2007-11-06 09:45:41 <1> $machine_ip(3655) [wfm] SlideShowCallbacks.ycp:253 Pkg Builtin called: TargetUsed 2007-11-06 09:45:41 <1> $machine_ip(3655) [wfm] SlideShowCallbacks.ycp:253 Pkg Builtin called: TargetCapacity 2007-11-06 09:45:41 <1> $machine_ip(3655) [YCP] SlideShow.ycp:1318 Installing kernel-default-2.6.16.46-0.13.x86_64.rpm -- The Standard Kernel 2007-11-06 09:45:41 <1> $machine_ip(3655) [rpm] RpmDb.cc(doInstallPackage):1825 RpmDb::installPackage(/mnt/var/tmp/AP_0x00000002/suse/x86_64/kernel-default-2.6.16.46-0.13.x86_64.rpm,0) 2007-11-06 09:45:41 <0> $machine_ip(3655) [zypp] ExternalProgram.cc(start_program):172 Executing 'rpm' '--root' '/mnt' '--dbpath' '/var/lib/rpm' '-U' '--percent' '--' '/mnt/var/tmp/AP_0x00000002/suse/x86_64/kernel-default-2.6.16.46-0.13.x86_64.rpm' 2007-11-06 09:45:41 <0> $machine_ip(3655) [zypp] ExternalProgram.cc(start_program):283 pid 10181 launched 2007-11-06 09:45:45 <0> $machine_ip(3655) [zypp] ExternalProgram.cc(checkStatus):336 pid 10181 successfully completed I don't see any indication (some incorrect requirement for -default or something) for why this is triggered. FYI.. the 0.13 kernel version listed is simply our custom kernel, which is just 0.12 with autofs5 patch to autofs4 kernel module, built from the existing src.rpm. We bump rev number for visual verification and so autoyast sees it as newer then the default. Our updates path has versions of this built as -default, -smp, -kdump, -debug and -xen like sles10-sp1 comes with. -- Mike Marion-Unix SysAdmin/Staff IT Engineer-http://www.qualcomm.com Bob: "Ok, I'm goin'... but a swift kick in the ass isn't the solution to everything you know." Red: "I gotta disagree with you there Bob!" -- That 70's show -- To unsubscribe, e-mail: opensuse-autoinstall+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-autoinstall+help(a)opensuse.org

2 1

[opensuse-autoinstall] apache configuration with sles10 sp1
by Rich 16 Nov '07

16 Nov '07

we are trying to use same autoyast profile created for sles10 for sles10sp1. after solving some minor kernel and nfs issues, an interesting problem with apache has popped up. after autoinstallation process has finished, default-server.conf is empty (0 size). if i now remove apache, then install it again, the file is correctly created. is there some change in autoyast profile needed (i have searched archives, but found nothing), or is there a problem with autoinstallation process ? -- Rich -- To unsubscribe, e-mail: opensuse-autoinstall+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-autoinstall+help(a)opensuse.org

2 2

[opensuse-autoinstall] Right way to query for install options?
by Lundgren, Andrew 15 Nov '07

15 Nov '07

I am creating an auto install file for machines that will not be using DHCP for network configuration. I would like the installer to query for the IP, netmask and gateway to be used on the box. Anyone have an example of how to do this? If not, what is the best way to go about this? Thanks! -- Andrew Lundgren -- To unsubscribe, e-mail: opensuse-autoinstall+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-autoinstall+help(a)opensuse.org

2 2

[opensuse-autoinstall] Don't deactivate boot partition
by Bernhard Walle 06 Nov '07

06 Nov '07

Hi, I have the problem that AutoYaST deactivates my boot partition (/dev/sda1) and makes the system unbootable. The setup is following: A partition /dev/sda1 contains a chainloader GRUB. The GRUB is installed in the boot sector of /dev/sda1. The MBR is the generic MBR. The XML file contains <bootloader> <global_entry> <key>serial</key> <value>--unit=0 --speed=57600</value> </global_entry> <global_entry> <key>terminal</key> <value>--timeout=10 serial cons</value> </global_entry> <global> <boot_boot>false</boot_boot> <boot_extended>false</boot_extended> <boot_mbr>false</boot_mbr> <boot_root>true</boot_root> </global> <activate config:type="boolean">false</activate> </bootloader> The root is /dev/sda5. YaST now makes /dev/sda3 (which contains /dev/sda5) as "active". But there's no bootloader. I just want the bootloader configuration module to do *not* activate or deactivate any partitions. This is SLES10-SP1. Any ideas? Thanks, Bernhard -- To unsubscribe, e-mail: opensuse-autoinstall+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-autoinstall+help(a)opensuse.org

1 0

[opensuse-autoinstall] Pattern file creation...
by Cameron Seader 05 Nov '07

05 Nov '07

Greetings, I am trying to create some Pattern files for add-on media for SLES10 and whenever i try to create one it does not work? I get a message in my y2log when YaST tries to parse it "MultiTag +Prv started before closing +Des". I have checked my Des tag and its closed with -Des: . If i copy a pattern file from the SLES10 media and then modify it, it works just fine. Any Thoughts why? This is very frustrating, about ready to pull my hair out. I have attached my pattern files. The one that works is labeled ZLM_Agent_X-10-7.2.1.i586.pat . TIA, Cameron

2 7

[opensuse-autoinstall] Example of class usage (sles9 sp3)
by Andrew Laden 02 Nov '07

02 Nov '07

I am trying to set up classes for my installations, and cant seem to get the syntax right. Does anyone have any full examples of how to set it up. What I have so far. . ./classes ./classes/Site ./classes/Site/autoinst-site1.xml ./classes/Site/autoinst-site2.xml ./classes/Platform ./classes/Platform/autoinst-DL385.xml ./classes/Base ./classes/Base/autoinst-base.xml ./autoinst-DLx85-site1.xml $ cat autoinst-DLx85-site1.xml <?xml version="1.0"?> <!DOCTYPE profile SYSTEM "/usr/share/autoinstall/dtd/profile.dtd"> <profile xmlns="http://www.suse.com/1.0/yast2ns" xmlns:config="http://www.suse.com/1.0/configns"> <classes config:type="list"> <class> <class_name>Base</class_name> <configuration>autoinst-base.xml</configuration> </class> <class> <class_name>Platform</class_name> <configuration>autoinst-DL385.xml</configuration> </class> <class> <class_name>Site</class_name> <configuration>autoinst-site1.xml</configuration> </class> </classes> </profile> $ cat classes/Platform/autoinst-DL385.xml <?xml version="1.0"?> <!DOCTYPE autoinstall SYSTEM "/usr/share/autoinstall/dtd/classes.dtd"> <autoinstall xmlns="http://www.suse.com/1.0/yast2ns" xmlns:config="http://www.suse.com/1.0/configns"> ..... Whole bunch of hardware specific stuff ..... </autoinstall> Similar for the other class files. I created my class files by splitting out a working profile into components. The profile as a whole works but when I try to do it via classes, the install bombs out when it tries to partition the disk saying that "An error has occurred while trying to create the partitioning plans. Make sure that the contol file has the correct syntax and values" Not sure if I have a syntax issue, or some other problem. Does anyone have a set of working files I can look at to see if I am missing anything? Or any better way to debug this? Some way that I can see if the file is getting merged properly? Thanks -Andrew -- _________________________________________________________ This communication is intended only for the addressee(s) and may contain confidential information. We do not waive any confidentiality by misdelivery. If you receive this communication in error, any use, dissemination, printing or copying is strictly prohibited; please destroy all electronic and paper copies and notify the sender immediately. -- To unsubscribe, e-mail: opensuse-autoinstall+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-autoinstall+help(a)opensuse.org

1 0

[opensuse-autoinstall] Is there a text-based yast installation?
by Alan McKay 01 Nov '07

01 Nov '07

Hey folks, Is it possible to do a text-based install like there is for Red Hat Anaconda? If so, how do I initiate it? I'm going through the docs but cannot see anything obvious. My problem is that I'm trying to install OpenSuSe 10.2 64bit within a VMWare machine, and it keeps crashing right near the end of the install when it's detecting hardware. I have a hunch that doing a text-based install would fix this, based on the stuff happening with the virtual screen at that time. thanks, -Alan -- "Aikido has but one principle - the universal reality of life" - Mitsugi Saotome -- To unsubscribe, e-mail: opensuse-autoinstall+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-autoinstall+help(a)opensuse.org

3 2