[opensuse-autoinstall] Pattern file creation...
Greetings, I am trying to create some Pattern files for add-on media for SLES10 and whenever i try to create one it does not work? I get a message in my y2log when YaST tries to parse it "MultiTag +Prv started before closing +Des". I have checked my Des tag and its closed with -Des: . If i copy a pattern file from the SLES10 media and then modify it, it works just fine. Any Thoughts why? This is very frustrating, about ready to pull my hair out. I have attached my pattern files. The one that works is labeled ZLM_Agent_X-10-7.2.1.i586.pat . TIA, Cameron
Could this be caused by the fact that the files i created are ASCII Text and the ones that work are UTF-8 encoded? -Cameron
On Fri, Nov 2, 2007 at 3:55 PM, in message <472B488F.8DDB.005B.0@novell.com>, "Cameron Seader"
wrote: Greetings, I am trying to create some Pattern files for add-on media for SLES10 and whenever i try to create one it does not work? I get a message in my y2log when YaST tries to parse it "MultiTag +Prv started before closing +Des". I have checked my Des tag and its closed with -Des: . If i copy a pattern file from the SLES10 media and then modify it, it works just fine. Any Thoughts why? This is very frustrating, about ready to pull my hair out. I have attached my pattern files. The one that works is labeled ZLM_Agent_X-10-7.2.1.i586.pat . TIA, Cameron
-- To unsubscribe, e-mail: opensuse-autoinstall+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-autoinstall+help@opensuse.org
Could this be caused by the fact that the files i created are ASCII Text and the ones that work are UTF-8 encoded? -Cameron
On Fri, Nov 2, 2007 at 3:55 PM, in message <472B488F.8DDB.005B.0@novell.com>, "Cameron Seader"
wrote: Greetings, I am trying to create some Pattern files for add-on media for SLES10 and whenever i try to create one it does not work? I get a message in my y2log when YaST tries to parse it "MultiTag +Prv started before closing +Des". I have checked my Des tag and its closed with -Des: . If i copy a pattern file from the SLES10 media and then modify it, it works just fine. Any Thoughts why? This is very frustrating, about ready to pull my hair out. I have attached my pattern files. The one that works is labeled ZLM_Agent_X-10-7.2.1.i586.pat . TIA, Cameron
-- To unsubscribe, e-mail: opensuse-autoinstall+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-autoinstall+help@opensuse.org
anyone with any thoughts??
On Sat, Nov 3, 2007 at 2:44 PM, in message <472C8942.8DDB.005B.0@novell.com>, "Cameron Seader"
wrote: Could this be caused by the fact that the files i created are ASCII Text and the ones that work are UTF-8 encoded? -Cameron On Fri, Nov 2, 2007 at 3:55 PM, in message <472B488F.8DDB.005B.0@novell.com>, "Cameron Seader"
wrote: Greetings, I am trying to create some Pattern files for add-on media for SLES10 and whenever i try to create one it does not work? I get a message in my y2log when YaST tries to parse it "MultiTag +Prv started before closing +Des". I have checked my Des tag and its closed with -Des: . If i copy a pattern file from the SLES10 media and then modify it, it works just fine. Any Thoughts why? This is very frustrating, about ready to pull my hair out. I have attached my pattern files. The one that works is labeled ZLM_Agent_X-10-7.2.1.i586.pat . TIA, Cameron
-- To unsubscribe, e-mail: opensuse-autoinstall+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-autoinstall+help@opensuse.org
-- To unsubscribe, e-mail: opensuse-autoinstall+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-autoinstall+help@opensuse.org
Cameron Seader wrote:
anyone with any thoughts??
Hi Cameron, your patterns, which are not working differ from the working ones in having a tailing whitespace in the "-Des:" lines. Maybe this causes the error. Regards Oliver -- Oliver Schweikert Software Development HORIBA Europe Automation Division GmbH Zabergäustr. 3 73765 Neuhausen (Germany) Tel: +49 7158-933-413 Fax: +49 7158-933-613 Email: oliver.schweikert@horiba.com Geschäftsführer: Thomas E. Ehmann, Yuichi Muroga, Takashi Nagano Amtsgericht Stuttgart, HRB 213200 -- To unsubscribe, e-mail: opensuse-autoinstall+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-autoinstall+help@opensuse.org
How can i find that tailing whitespace? Is there anything i can do in VI to see that? -Cameron
On Mon, Nov 5, 2007 at 8:11 AM, in message <472F329D.8070200@horiba.com>, Oliver Schweikert
wrote:
Cameron Seader wrote:
anyone with any thoughts??
Hi Cameron,
your patterns, which are not working differ from the working ones in
having
a tailing whitespace in the "-Des:" lines. Maybe this causes the error.
Regards Oliver
-- Oliver Schweikert Software Development
HORIBA Europe Automation Division GmbH Zabergäustr. 3 73765 Neuhausen (Germany) Tel: +49 7158-933-413 Fax: +49 7158-933-613 Email: oliver.schweikert@horiba.com
Geschäftsführer: Thomas E. Ehmann, Yuichi Muroga, Takashi Nagano Amtsgericht Stuttgart, HRB 213200
-- To unsubscribe, e-mail: opensuse-autoinstall+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-autoinstall+help@opensuse.org
Cameron Seader wrote:
How can i find that tailing whitespace? Is there anything i can do in VI to see that? -Cameron
In command mode type "set list" (revert with "set nolist").
On Mon, Nov 5, 2007 at 8:11 AM, in message <472F329D.8070200@horiba.com>, Oliver Schweikert
wrote: Cameron Seader wrote:
anyone with any thoughts??
Hi Cameron,
your patterns, which are not working differ from the working ones in having a tailing whitespace in the "-Des:" lines. Maybe this causes the error.
Regards Oliver
-- Oliver Schweikert Software Development
HORIBA Europe Automation Division GmbH Zabergäustr. 3 73765 Neuhausen (Germany) Tel: +49 7158-933-413 Fax: +49 7158-933-613 Email: oliver.schweikert@horiba.com
Geschäftsführer: Thomas E. Ehmann, Yuichi Muroga, Takashi Nagano Amtsgericht Stuttgart, HRB 213200
-- Oliver Schweikert Software Development HORIBA Europe Automation Division GmbH Zabergäustr. 3 73765 Neuhausen (Germany) Tel: +49 7158-933-413 Fax: +49 7158-933-613 Email: oliver.schweikert@horiba.com Geschäftsführer: Thomas E. Ehmann, Yuichi Muroga, Takashi Nagano Amtsgericht Stuttgart, HRB 213200 -- To unsubscribe, e-mail: opensuse-autoinstall+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-autoinstall+help@opensuse.org
Thank You they work now. :)
On Mon, Nov 5, 2007 at 8:37 AM, in message <472F38BC.9020101@horiba.com>, Oliver Schweikert
wrote:
Cameron Seader wrote:
How can i find that tailing whitespace? Is there anything i can do
in VI
to see that? -Cameron
In command mode type "set list" (revert with "set nolist").
On Mon, Nov 5, 2007 at 8:11 AM, in message <472F329D.8070200@horiba.com>, Oliver Schweikert
wrote: Cameron Seader wrote:
anyone with any thoughts??
Hi Cameron,
your patterns, which are not working differ from the working ones in having a tailing whitespace in the "-Des:" lines. Maybe this causes the error.
Regards Oliver
-- Oliver Schweikert Software Development
HORIBA Europe Automation Division GmbH Zabergäustr. 3 73765 Neuhausen (Germany) Tel: +49 7158-933-413 Fax: +49 7158-933-613 Email: oliver.schweikert@horiba.com
Geschäftsführer: Thomas E. Ehmann, Yuichi Muroga, Takashi Nagano Amtsgericht Stuttgart, HRB 213200
-- Oliver Schweikert Software Development
HORIBA Europe Automation Division GmbH Zabergäustr. 3 73765 Neuhausen (Germany) Tel: +49 7158-933-413 Fax: +49 7158-933-613 Email: oliver.schweikert@horiba.com
Geschäftsführer: Thomas E. Ehmann, Yuichi Muroga, Takashi Nagano Amtsgericht Stuttgart, HRB 213200
-- To unsubscribe, e-mail: opensuse-autoinstall+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-autoinstall+help@opensuse.org
-- To unsubscribe, e-mail: opensuse-autoinstall+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-autoinstall+help@opensuse.org
participants (2)
-
Cameron Seader
-
Oliver Schweikert