October 2004 - openSUSE AMD64 - openSUSE Mailing Lists

English Translation -- RE: [suse-amd64] SuSEfirewall2で気になったこと
by Pettini, Don 29 Oct '04

29 Oct '04

Hi All, I ran this through a translator, here is the engligh of it. Don It is Imai. 9.1 SuSEfirewall2 (/etc/sysconfig/SuSEfirewall2) rustling fumbling, the て you became aware, it is, but... . FW_SERVICES_EXT_RPC (one way there is no port number, it is with rpcinfo command issuing, in order the type which decides the port number which it passes) with to pass through the relationship of NIS, what it sets is to call, but at the time of Linux starting network before starting, the processing per SuSEfirewall2_init (really it is inside /sbin/SuSEfirewall2 command don't you think?) with very rpcinfo command to issue, making the message which the ちゃってる to seem the port mapper - with you cannot connect and how say, it increases. The port mapper - being to be before the starting, such error coming out is natural, but. After, Squid using, the る it is with FW_SERVICE_SQUID=" Yes" When it does and solves "Squid starting around SuSEfilrewall2_init and SuSEfirewall2_setup, increase it is" with the message which you say coming out, however the る it is, if this you mention just a little stupidity, don't you think? it is stupid. FW_SERVICES_EXT_RPC and others becoming the same 9.1 NIS servers with seeing, and SuSEfirewall2 moving with the る machine, in case of the る, unless ypbind it is moved with the NIS server, it denies the connection from クライアント and the ちゃってる way the air.... . If (you mention the proper, it is proper, but....) That this of /etc/sysconfig/SuSEfirewall2 you can fumble, but it is, it is a little sad not to be able to correspond with, don't you think? is. 9.2 So becoming dyspepsia, so it puts out.... . -- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Imai Yutaka mail: Maimai(a)coral.ocn.ne.jpweb: Http: //www10.ocn.ne.jp/ - Masimai/ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - --Check the List-Unsubscribe header to unsubscribe For additional comman ds and email: Suse-amd64-help(a)suse.com -----Original Message----- From: Masaru Imai [mailto:maimai@coral.ocn.ne.jp] Sent: Friday, October 29, 2004 11:34 AM To: suse-amd64(a)suse.com Subject: [suse-amd64] SuSEfirewall2で気になったこと今井です。 9.1のSuSEfirewall2(/etc/sysconfig/SuSEfirewall2)をごそごそいじってて気づいたんですが....。 FW_SERVICES_EXT_RPC(ポート番号が一意じゃないんでrpcinfoコマンド発行して通すポート番号を決定するタイプ)でNIS関係を通す様に設定したのはいいんですが、Linux起動時にネットワーク起動する前にSuSEfirewall2_init あたりの処理(実際は/sbin/SuSEfirewall2コマンド内部ですね)でどうもrpcinfo コマンド発行しちゃってるらしくポートマッパーと接続できないなんていうメッセージを出してくれてます。ポートマッパー起動前なのでそういうエラーが出るのも当り前ではありますが。あと、Squid使ってるんでFW_SERVICE_SQUID="yes"にしとくと SuSEfilrewall2_init、SuSEfirewall2_setup辺りで「Squid起動してません」というメッセージ出てきてるんですけどこれもちょっと間抜けと言えば間抜けですね。 FW_SERVICES_EXT_RPCがらみで同じ9.1のNISサーバーとなってるマシンでも SuSEfirewall2動かしてる場合、NISサーバーでもypbind動かしてないとクライアントからの接続を拒否しちゃってる様な気が.....。(当然と言えば当然ですが....) /etc/sysconfig/SuSEfirewall2あれこれいじれるんだけどyastで対応しきれてないのが少し悲しいですね。9.2でも消化不良になってそうだし.....。 -- ‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾ 今井優 mail: maimai(a)coral.ocn.ne.jp web: http://www10.ocn.ne.jp/‾masimai/ ‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾ -- Check the List-Unsubscribe header to unsubscribe For additional commands, email: suse-amd64-help(a)suse.com

1 0

Re: [suse-amd64] 9.2 DVD media
by Brad Bourn 29 Oct '04

29 Oct '04

The USB stick is a 10/100 network card (wired). That is what I was wondering wether or not the boot CD would have drivers for to be able to do a network install from the laptop's NFS... B-) On Friday 29 October 2004 04:57 am, Joel Wiramu Pauling wrote: > On Thu, 2004-10-28 at 08:07 -0600, Brad Bourn wrote: > > Could you explain a little? > > Recent motherboard chipset bios's support booting off USB devices, be it > USB hard drive (ipod) or USB key stick. > > You go about creating a boot drive on your USB keystick like you would > any other boot partition/drive, and make sure it is plugged in on cold > boot. > > In you bios there will be a boot order/boot from option, this is > normally set to floppy/cdrom/ide-0 by default (or similar) but you can > change round the order of precidence which the Bios will look for a boot > sector, you want to set it to USB or external or other... any of those > three options set to the first boot device, with your usb bootable drive > inserted will make it boot from it. > > If it doesn't then your bios probably doesn't support booting from usb > devices. > > > What to look for? > > > > Any way around? > > > > B-) > > > > On Thursday 28 October 2004 07:56 am, Andreas Jaeger wrote: > > > Brad Bourn <brad(a)summitrd.com> writes: > > > > Brings up a good question. > > > > > > > > I have a cdwriter in this laptop, so making boot cd shouldn't be a > > > > problem. > > > > > > > > The question I have for ya, is , I have a USB network "stick" sort of > > > > thingie from Linksys, will it get recognised and configured with the > > > > boot cd without too much trouble? > > > > > > It might - it depends on your BIOS. > > > > > > > All the easier to take over the world If I can just plug into said > > > > PC, and VIOLA! > > > > > > ;-) > > > > > > Andreas

1 0

Re: [suse-amd64] instant reset with suse 9.2 memtest bootmenu entry from the dvd no.1
by Andreas Bittner 29 Oct '04

29 Oct '04

Joel Wiramu Pauling wrote: > Do you have ecc ram? It is possible that your mobo and the ECC ram > you are using are incompatible, try turning off ecc mode in the bios > (or if it's not on, on). standard system, and it runs everything else fine. even installs suse 9.2 and runs suse 9.2 livemedia. so its not a problem with the hardware. it should be a problem with the memtest > Also, the next step to try if you suspect faulty ram is to boot a > working system, and download smprime. And run the mprimes stress > test, overnight, it should be able to keep running, if it errors out > you know you have issues with your ram. see above.

2 2

NVIDIA GL drivers 32/64 libraries
by Mike 29 Oct '04

29 Oct '04

Hi all - I'm slowly getting my new AMD system together. Most everything is going smoothly. I installed the NVIDIA drivers using YaST, and didn't appear to have any problems. However, trying to run some of my old GL games (quake3, Unreal Tournament, Unreal Tournament 2003) it appears none of them work. Looking into it a bit, it looks like the NVIDIA drivers only install into /usr/lib64, and the drivers in /usr/lib are the Mesa software drivers. I downloaded and unpacked the NVIDIA driver software, and in the download there is a /usr/lib32 directory with 32-bit 6111 drivers. Unfortunately, when I try to get the GL games to run using those drivers, they segfault shortly after trying to initialize the GL viewport. Any ideas? Thanks!

7 11

ASUS K8V Deluxe Motherboard LAN problems (SuSE 9.1 + AMD64 3000+)
by Pierre Patino 28 Oct '04

28 Oct '04

Hello I've spent two days wrestling, googling and asking but cannot get the onboard Gigabit LAN (3Com 3C940) to work on this board. Can anyone lend me a hand? I've had to put a cheap PCI card to get out to the world. I know that the onboard sound is a lost cause (?) but it would be sad to lose two PCI slots. I've been to syskonnect's site and tried the sk98lin module but that did not seem to do anything (apparently the driver is supposed to work with the 3Com chipset; maybe I'm way off). I would like to build a couple more of these boxes for my friends and family... TIA&Cheers

5 7

Yast Kernel Update
by Edwin Heath 28 Oct '04

28 Oct '04

Hi, I've tried getting the latest Kernel patch through YOU for the last few days and every time I get an error that the RPM has an invalid signature! I looked at the Yast Log and pulled out and ran the following command: rpm --checksig /var/lib/YaST2/you/mnt/x86_64/update/9.1/rpm/x86_64/kernel-default-2.6.5-7.111.x86_64.rpm this gave me: /var/lib/YaST2/you/mnt/x86_64/update/9.1/rpm/x86_64/kernel-default-2.6.5-7.111.x86_64.rpm: sha1 MD5 GPG NOT OK uname -a gives me: Linux espresso 2.6.5-7.108-default #1 Wed Aug 25 13:34:40 UTC 2004 x86_64 x86_64 x86_64 GNU/Linux So the question is how do I get it back to being OK? can I just delete kernel-default-2.6.5-7.111.x86_64.rpm and try again? Any help greatly appreciated :-) Ed

1 0

instant reset with suse 9.2 memtest bootmenu entry from the dvd no.1
by Andreas Bittner 28 Oct '04

28 Oct '04

hello, just tried to try the suse 9.2 dvd no.1 on an asus p4p800-e deluxe with some celeron-d. when i select the memtest from the bootmenu from the dvd no.1 on this system, it barely makes it into the text mode of memtest and resets the whole machine instantly. ...

1 0

Compiling Apache on 9.1 fails
by HES Support 28 Oct '04

28 Oct '04

We're unable to successfully compile Apache (2.0.52) with SUSE 9.1 (2.6.4-52-default) 64bit . We have no problems with the 32bit version of SUSE 9.1 and Apache 2.0.52.. A fresh install of 9.1 started us out. Apache 2.0.52 was downloaded, gunzipped, untarred and configure was run. It fails at the make. We've reinstalled a couple of times but without finding anybody else having problems here, we're not sure what to do next and appreciate any help. Since this is 64 bit we thought the reference to /usr/lib (instead of /usr/lib64) might be causing the problem. We're thinking of just going with the 32bit install... make ... Making all in support make[1]: Entering directory `/root/apache/httpd-2.0.52/support' make[2]: Entering directory `/root/apache/httpd-2.0.52/support' /root/apache/httpd-2.0.52/srclib/apr/libtool --silent --mode=compile gcc -g -O2 -pthread -DLINUX=2 -D_REENTRANT -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -D_SVID_SOURCE -D_GNU_SOURCE -DAP_HAVE_DESIGNATED_INITIALIZER -I/root/apache/httpd-2.0.52/srclib/apr/include -I/root/apache/httpd-2.0.52/srclib/apr-util/include -I. -I/root/apache/httpd-2.0.52/os/unix -I/root/apache/httpd-2.0.52/server/mpm/prefork -I/root/apache/httpd-2.0.52/modules/http -I/root/apache/httpd-2.0.52/modules/filters -I/root/apache/httpd-2.0.52/modules/proxy -I/root/apache/httpd-2.0.52/include -I/root/apache/httpd-2.0.52/modules/generators -I/root/apache/httpd-2.0.52/modules/dav/main -prefer-non-pic -static -c htpasswd.c && touch htpasswd.lo /root/apache/httpd-2.0.52/srclib/apr/libtool --silent --mode=link gcc -g -O2 -pthread -DLINUX=2 -D_REENTRANT -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -D_SVID_SOURCE -D_GNU_SOURCE -DAP_HAVE_DESIGNATED_INITIALIZER -I/root/apache/httpd-2.0.52/srclib/apr/include -I/root/apache/httpd-2.0.52/srclib/apr-util/include -I. -I/root/apache/httpd-2.0.52/os/unix -I/root/apache/httpd-2.0.52/server/mpm/prefork -I/root/apache/httpd-2.0.52/modules/http -I/root/apache/httpd-2.0.52/modules/filters -I/root/apache/httpd-2.0.52/modules/proxy -I/root/apache/httpd-2.0.52/include -I/root/apache/httpd-2.0.52/modules/generators -I/root/apache/httpd-2.0.52/modules/dav/main -export-dynamic -o htpasswd htpasswd.lo /root/apache/httpd-2.0.52/srclib/pcre/libpcre.la /root/apache/httpd-2.0.52/srclib/apr-util/libaprutil-0.la -lexpat /root/apache/httpd-2.0.52/srclib/apr/libapr-0.la -lrt -lm -lcrypt -lnsl -lpthread -ldl /usr/lib/libexpat.so: could not read symbols: Invalid operation collect2: ld returned 1 exit status make[2]: *** [htpasswd] Error 1 make[2]: Leaving directory `/root/apache/httpd-2.0.52/support' make[1]: *** [all-recursive] Error 1 make[1]: Leaving directory `/root/apache/httpd-2.0.52/support' make: *** [all-recursive] Error 1

4 7

Re: [suse-amd64] NVIDIA GL drivers 32/64 libraries
by Örn Hansen 28 Oct '04

28 Oct '04

torsdag 28 oktober 2004 03:01 skrev Mike: > On Sunday 24 October 2004 20:00, Örn Hansen wrote: > > söndag 24 oktober 2004 19:17 skrev Mike: > > I've got the latest NVIDIA, and I can play Unreal Tournament, Quake 3, > > Americas Army, Urban Terror ... and Doom 3, without a glitch on my AMD > > 64bit system. So, it's not the NVIDIA drivers, at all. I'd rather > > think, that the reason are a bunch of missing 32bit libraries, like X11. > > I've gotten it working, but with much poorer performance than expected. > Has anyone seen the message: > > NVRM: not using NVAGP, kernel was compiled with GART_IOMMU support!! > > in their boot log? According to /proc I AGP is disabled (which would > explain the low speed). > Here ... # cat /proc/driver/nvidia/agp/status Status: Enabled Driver: AGPGART AGP Rate: 4x Fast Writes: Disabled SBA: Disabled Try the other AGP options in the XF86Config file ... > Thanks! hth, Örn

1 0

Re: [suse-amd64] 9.2 DVD media
by Brad Bourn 28 Oct '04

28 Oct '04

Brings up a good question. I have a cdwriter in this laptop, so making boot cd shouldn't be a problem. The question I have for ya, is , I have a USB network "stick" sort of thingie from Linksys, will it get recognised and configured with the boot cd without too much trouble? All the easier to take over the world If I can just plug into said PC, and VIOLA! B-) On Thursday 28 October 2004 07:47 am, you wrote: > Brad Bourn <brad(a)summitrd.com> writes: > > Well, I decided to leave the full media there so I can install it on as > > many machines as possible with a boot cd/network install.... > > That's what I also do... > > > Going to take over the world! > > Please do ;-) > > Andreas

2 2