openSUSE AMD64 December 2005

amd64@lists.opensuse.org

24 participants
25 discussions

by Constantine 'Gus' Fantanas

Hello all. When the instant messenger gaimt wants to play a sound, I get the following errors: tcp_connect: can't connect to server (tcp:presario.localnet:1036) unix_connect: can't connect to server (unix:/tmp/ksocketu-gus/presario.localnet-220c-436955fe) Could somebody explain what these error messages mean? The file '/etc/services' indicates that port 1036 is reserved for ntssp (tcp/udp Nebula Secure Segment Transfer Protocol). I admit I am lost. TIA for your time. CF

16 years, 3 months

RE: [suse-amd64] Sata Raid Controller for 64 bit?

by Black, Alain

Same here. Lspci shows it as " 01:01.0 RAID bus controller: 3ware Inc 3ware 7000-series ATA-RAID (rev 01)" We are also running the 3dm software to monitor the card/RAID set. -Alain. -----Original Message----- From: Kevin_Gassiot(a)veritasdgc.com [mailto:Kevin_Gassiot@veritasdgc.com] Sent: Tuesday, October 18, 2005 7:42 AM To: Andy Cc: Black, Alain; suse-amd64(a)suse.com; suse-ia64(a)suse.com Subject: Re: [suse-amd64] Sata Raid Controller for 64 bit? I've got one of the 8506 series SATA RAID controllers running the stock 3w-xxxx driver with no problems so far - had more problems finding an XP64 driver for it.... Kevin Gassiot Advanced Systems Group Visualization Systems Support Veritas DGC 10300 Town Park Dr. Houston, Texas 77072 832-351-8978 kevin_gassiot(a)veritasdgc.com "Andy" <frum(a)ar-sd.net> To 10/18/2005 02:57 "Black, Alain" AM <ablack(a)bloodsystems.org>, <suse-amd64(a)suse.com>, <suse-ia64(a)suse.com> cc Subject Re: [suse-amd64] Sata Raid Controller for 64 bit? >> We also use the 3ware RAID controllers for SATA. And have had no >> problems with them. I supose you mean the 3ware 9500S series controllers. I couldn't find any drivers for suse 9x 64 for the 8506 series. Andy. ----- Original Message ----- From: "Black, Alain" <ablack(a)bloodsystems.org> To: <suse-amd64(a)suse.com>; <suse-ia64(a)suse.com> Sent: Monday, October 17, 2005 10:24 PM Subject: RE: [suse-amd64] Sata Raid Controller for 64 bit? -----Original Message----- From: Jack Malone [mailto:jmalone@horizonind.com] Sent: Monday, October 17, 2005 4:18 AM To: suse-amd64(a)suse.com; suse-ia64(a)suse.com Subject: Re: [suse-amd64] Sata Raid Controller for 64 bit? At 04:06 AM 10/17/2005, Andy wrote: >Hi to all, > >We have a Fujitsu Siemens Econel 200 Server. 2x Intel Xeon 2.8, 2x >SATA HDD. Suse 9.1 64 Prof is installed. > >At the moment we are using a software raid, but we want to buy 2 >more HDD's and implement a 0+1 or 1+0 RAID. >I looked over and over about raid controllers, have found from 120 >EURO's to 1000 EURO's but there seems to be a little problematic >the Suse 64 driver. > >A very convenient driver would be the >Promise FastTrack S150 TX4 or >SX4 controller >but I still don't know if the drivers are quite functional. > >The tx4 seems faster as the sx4 but has no 64 driver. > >We had in the past some problems with hardware raid controller on suse. > >Does anyone uses some good raid controllers and could give me some >informations? > >I have been using 3ware sata raid on two different machines here at >work with amd 64 cpu's in them with no problem. suse has the 3ware >driver built in for years now. been using 3ware raid cards for years >also with no problems. now I am not sure what they cost in >EURO's since im in the US. jack -- Check the List-Unsubscribe header to unsubscribe For additional commands, email: suse-amd64-help(a)suse.com We also use the 3ware RAID controllers for SATA. And have had no problems with them. -Alain -- Check the List-Unsubscribe header to unsubscribe For additional commands, email: suse-amd64-help(a)suse.com -- Check the List-Unsubscribe header to unsubscribe For additional commands, email: suse-amd64-help(a)suse.com

16 years, 3 months

"crasy" daemon ksoftirqd (SuSE 9.2 AMD64, KDE 3.3 or 3.4)

by patheve2

Hello Why, after a long time of use, does this daemon ksoftirqd become "crasy" by using more than 95% of the CPU ? I got this under SuSE 9.1 AMD64 with KDE 3.2 or 3.3. I get it again under SuSE 9.2 AMD64 with KDE 3.3 and now 3.4. Kind regards Pascal

16 years, 5 months

Mixed opterons on susE 10.0 64?

by bob sandefur

Hi According to: http://www.tomshardware.com/2005/11/28/are_three_cores_better_than_two/index .html You can mix cpus and windows will work. Has anyone done this with SUSE 10.0? THANX Robert (Bob) L. Sandefur PE Senior Geostatistician / Reserve Analyst CAM 200 Union Suite 430 Lakewood, Co 80228 rsandefur(a)cam-llc.com 303 472-3240 (cell) <-best choice 303 716-1617 ext 14 The content of this message may contain the private views and opinions of the sender and does not constitute a formal view and/or opinion of the company unless specifically stated. The contents of this email and any attachments may contain confidential and/or proprietary information, and is intended only for the person/entity to whom it was originally addressed. Any dissemination, distribution or copying of this communication is strictly prohibited. If you have received this email in error please notify the sender immediately by return e-mail and delete this message and any attachments from your system.

16 years, 5 months

x86_64 default kernel on suse 10.0 has no ATM and PPOATM support

by reinhard schwab

The config for the x86_64 default kernel on suse 10.0 lacks some entries, if i compare it to the i386 default kernel: CONFIG_ATM=m CONFIG_PPPOATM=m is there any (good) reason that atm and ppoatm are not supported in the x86_64 default kernel by suse? regards reinhard

16 years, 5 months

Gigabyte GA-K8NF-9 lm_sensors config

by Volker Kuhlmann

Has anyone managed to make a working /etc/sensors.conf file for a Gigabyte GA-K8NF-9 motherboard? Nforce4-4X chipset. The sensors-detect script found the chip(s) alright and loads a bunch of modules successfully, but the output from sensors is pretty scrambled - two thirds values out of range. The sensors.conf on the gentoo forum only works fractionally better. Failing that, does anyone have a working config for any Gigabyte GA-K8* mobo with any nforce4-* chipset? Thanks, Volker -- Volker Kuhlmann is possibly list0570 with the domain in header http://volker.dnsalias.net/ Please do not CC list postings to me.

16 years, 5 months

read write sharing files between XP pro ntfs compressed and SUSE 10.0 on dual boot machine

by bob sandefur

Hi- I would like to have the ability to share files between XP-64 and suse10.0 x86-64 on the same dual boot machine and I though I could do this with ReiserFS on SUSE 10 using Paragon ntfs for linux( http://www.ntfs-linux.com/ but it won't install on 10.0 and I can't find a way to mount reiserFS on XP. I am addicted to NTFS compressed so fat32 is not a option so I guess the solution is to install 10.0 with ext3 instead of reiser as there seem to be lots of ext3 read write options from XP. Questions Any other ideas before I reinstall 10.0? Is reiser better than ext3? (If no why is it the suse default?) Thanx Robert (Bob) L. Sandefur PE Senior Geostatistician / Reserve Analyst CAM 200 Union Suite 430 Lakewood, Co 80228 rsandefur(a)cam-llc.com 303 472-3240 (cell) <-best choice 303 716-1617 ext 14 The content of this message may contain the private views and opinions of the sender and does not constitute a formal view and/or opinion of the company unless specifically stated. The contents of this email and any attachments may contain confidential and/or proprietary information, and is intended only for the person/entity to whom it was originally addressed. Any dissemination, distribution or copying of this communication is strictly prohibited. If you have received this email in error please notify the sender immediately by return e-mail and delete this message and any attachments from your system.

16 years, 5 months

K3b and joliet

by Karaoulis Marios

Hi, I spent some time searching the list but i can't find something related. My problem is with joliet extension. I use suse 10 (64 bit) and k3b 0.12.8. I have problem while using joliet extensions and DVD project When projects starts, shows the warning message that some filenames must be shorten etc, and althought burn starts ok, after a while it stops before finishing the burn ( i mean it burns ps only the half data i want) . The strange thing is that it doesn't show any message. It says burn processe finished ok (just like nothing happen). But there are only part of data i wrote. My guess is that when it comes to the file that must short it's name something goes wrong there. This never happend when i try to burn a CD or DVD project without joliet. Only on DVD projects with joliet. Actually i was never able to burn DVD with joliet since suse 9.2...... __________________________________________________ �� Yahoo!; �� (spam); �� Yahoo! Mail �� http://mail.yahoo.gr

16 years, 5 months

/dev/sgX + 32 bit apps

by Volker Kuhlmann

I have a 32bit commercial application (vuescan, hamrick.com) which fails on SUSE 10.0 64 bit. According to its author, the problem is in the /dev/sg driver not implementing 32 bit compatibility, and he doesn't have time to implement vuescan workarounds. This is very annoying, as sane-based opensource scanning applications are all rubbish (trust me I've tried, but that's OT here). Using linux32 doesn't help. Can someone with more detailed kernel knowledge say whether there is some other workaround for Linux? Is there a fix for the sg devices in the pipeline? Thanks, Volker -- Volker Kuhlmann is possibly list0570 with the domain in header http://volker.dnsalias.net/ Please do not CC list postings to me.

16 years, 5 months

autodownload tool (A bit off topicO

by bob sandefur

Hi- I would like to auto download some maps of the US from a link like the following: http://extract.cr.usgs.gov/Website/distreq/RequestSummary.jsp?AL=39.125,39., -105.875,-105.9375 <http://extract.cr.usgs.gov/Website/distreq/RequestSummary.jsp?AL=39.125,39. ,-105.875,-105.9375&PR=0&PL=DGD02H> &PR=0&PL=DGD02H But I need to auto click the download button. Is there a SUSE 10.0 browser or tool that will allow me to do this? Thanx Robert (Bob) L. Sandefur PE Senior Geostatistician / Reserve Analyst CAM 200 Union Suite 430 Lakewood, Co 80228 rsandefur(a)cam-llc.com 303 472-3240 (cell) <-best choice 303 716-1617 ext 14 The content of this message may contain the private views and opinions of the sender and does not constitute a formal view and/or opinion of the company unless specifically stated. The contents of this email and any attachments may contain confidential and/or proprietary information, and is intended only for the person/entity to whom it was originally addressed. Any dissemination, distribution or copying of this communication is strictly prohibited. If you have received this email in error please notify the sender immediately by return e-mail and delete this message and any attachments from your system.

16 years, 5 months

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

openSUSE AMD64 December 2005