March 2011 - openSUSE Packaging - openSUSE Mailing Lists

[opensuse-packaging] Right usage of libexecdir?
by Vincent Untz 25 May '11

25 May '11

Hey, Dominique and I are currently wondering what to do wrt libexecdir for evolution-data-server. Should we leave it unchanged (so files will be in /usr/lib) or should we change it to /usr/lib/evolution-data-server? If the latter, is there any reason this is not done automatically? Also, hrm, would rpmlint have ways to warn about packages that put binaries in libdir instead of libexecdir? (I can find a few of them here with a grep) Vincent -- Les gens heureux ne sont pas pressés. -- To unsubscribe, e-mail: opensuse-packaging+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-packaging+help(a)opensuse.org

6 9

[opensuse-packaging] blog post series started for rpmlint and brp warnings / errors
by Dominique Leuenberger a.k.a DimStar 08 Apr '11

08 Apr '11

Hi everybody, We know them all and some of us get frustrated by them: lints and brp checks aborting our builds, even though make and make install perfectly passed through (well, one correction here already: APPARENTLY perfectly passed). I do not argue against the checks at all and I think they are a good thing (tm). But sometimes they can be a little bit cryptic and most of the time require work. so I started a series of blog posts (2 so far) which try to address them. Please bare with me, I'm no hard core crack coder, but I will try to summarize the usual causes and solutions to a problem. Not in every case will the provided solution fit and if you're not sure about correctness in your package: discuss the matter with upstream. Anyway, once you produce a patch, you should always make sure upstream gets it too. So what were the blog posts about so far? Part 1: how to fix brp and rpmlint warnings ? today: Expression compares a char* pointer with a string literal http://dominique.leuenberger.net/blog/?p=151 Part 2: how to fix brp and rpmlint warnings ? today: I: Program causes undefined operation (likely same variable used twice and post/pre incremented in the same expression) http://dominique.leuenberger.net/blog/?p=178 As noted on the first entry, i will gladly take recommendations for which errors you would like to see an entry. I will try to write them up, likely 1 or 2 per week (I am actually not that much of a writer... 0 Hope the series is useful to you... If it saves you a few minutes here and there, then it is. Best regards, Dominique -- To unsubscribe, e-mail: opensuse-packaging+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-packaging+help(a)opensuse.org

5 5

[opensuse-packaging] dropping licenses
by Stephan Kulow 04 Apr '11

04 Apr '11

Hi, The licenses package is 300KB on the live cd and the only files linked into are gpl licenses - in addition it's very unclear if links to licenses are really ok. So I submitted a fix for all packages in factory I could find using licenses - for some I had to include a license. The licenses package will soon disappear, so please review and forward the requests. Greetings, Stephan -- To unsubscribe, e-mail: opensuse-packaging+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-packaging+help(a)opensuse.org

4 4

[opensuse-packaging] Buildservice problem?
by Stefan Seyfried 03 Apr '11

03 Apr '11

Hi, is there a maintenance window? Where was it announced (so that I could subscribe to the feed)? How long will it take? Generally there seems to be nothing like a status page for openSUSE services. Would be genuinely useful. -- Stefan Seyfried "Dispatch war rocket Ajax to bring back his body!" -- To unsubscribe, e-mail: opensuse-packaging+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-packaging+help(a)opensuse.org

4 4

[opensuse-packaging] A .desktop file uses icon from another package
by Ilya Chernykh 02 Apr '11

02 Apr '11

Hi! I have a question. I want to a package which heavily uses icons from another one. But the OBS system does not allow to built it: it says "icon file not installed" even though the dependency on a package that contains the necessary icon is included. What can I do to successfully install this package? -- To unsubscribe, e-mail: opensuse-packaging+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-packaging+help(a)opensuse.org

6 7

[opensuse-packaging] Python 3.2 build problems
by Dave Plater 01 Apr '11

01 Apr '11

I'm busy fighting with the python3-base-3.2 build, which seems to be unpredictable atm, due to blender (against the protests of distro packagers) switching to that version. The 11.4 x86_64 build fails in devel:languages:python:Factory but all the others succeed, I've had varying build results by linking home:plater:blender python3-base to home:plater:blender python3 and devel:languages:python:Factory python3, when linked to devel:languages:python:Factory python3 it mimics the devel build but when linked to home:plater:blender python3 I've had complete build failures and all x86_64 failures with i586 successes with a fresh untouched branched python3 after only adding a fedora conditional for BuildRequires first. I understand that the build service servers aren't 100% in fact the connection was down again a few moments ago and up again now, I don't know if this has any effect that can cause such build behaviour? It also builds differently on my local x86_64 11.4 system using rpmbuild. As it stands now, I've added a few build requirements which seemed to be missing and have experienced an i586 failure due to -pg and -fomit-frame-pointer being incompatible and redefining $RPM_OPT_FLAGS omitting -fomit-frame-pointer (without diving into gcc) can this cause problems? It looks like I've a successful build atm but only after changing a few build options. Here is the diff with comments: %build # use rpm_opt_flags +# Redefine opt flags due to error: -pg and -fomit-frame-pointer are incompatible +export RPM_OPT_FLAGS="-fmessage-length=0 -O2 -Wall -D_FORTIFY_SOURCE=2 -fstack-protector -funwind-tables -fasynchronous-unwind-tables -g" export OPT="$RPM_OPT_FLAGS" #export OPT="-O0 -g" @@ -201,10 +210,12 @@ --docdir=%{_docdir}/python \ --enable-ipv6 \ --with-fpectl \ - --enable-shared + --enable-shared \ + --with-cxx-main=%{_bindir}/c++ configure started asking for a c++ compiler LD_LIBRARY_PATH=.:$LD_LIBRARY_PATH \ - make %{?_smp_mflags} profile-opt + make %{?_smp_mflags} This is the change that had the most effect on the build succeeding. +# profile-opt %check # test_file fails in autobuild env - "stdin.seek(-1)" wrongly succeeds. probably an issue with autobuild's stdin @@ -244,10 +255,10 @@ # cleanup parts that don't belong for so in _md5 _sha1 _sha256 _sha512; do - rm $RPM_BUILD_ROOT%{sitedir}/lib-dynload/$so.* + rm -f $RPM_BUILD_ROOT%{sitedir}/lib-dynload/$so.* _md5 and _sha1 don't exist, I haven't checked the others but when I see things missing that existed before I get worried. done for dir in curses dbm sqlite3 tkinter; do - rm -r $RPM_BUILD_ROOT%{sitedir}/$dir + rm -rf $RPM_BUILD_ROOT%{sitedir}/$dir done # install site-specific tweaks @@ -277,7 +288,7 @@ # move idle config into /etc install -d -m 755 ${RPM_BUILD_ROOT}/etc/idle3 -( +( cd ${RPM_BUILD_ROOT}/%{sitedir}/idlelib/ for file in *.def ; do mv $file ${RPM_BUILD_ROOT}/etc/idle3/ I use kwrite for spec files and it saves in UTF8 also removes trailing white spaces. I would appreciate expert help with this after which python3-3.2 could hopefully be ready for tumbleweed, blender is about to be 2.57 RC1 and will be released in about a month, the current blender in 11.4 is beta plus svn and would have been newer if the switch to python 3.2 hadn't happened. I think blender is the main consumer of python3 along with a couple of gnome apps. Thanks Dave P -- To unsubscribe, e-mail: opensuse-packaging+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-packaging+help(a)opensuse.org

2 5

[opensuse-packaging] Re: [obs submit-request 65647] openSUSE:Factory/perl-File-Slurp: declined by saschpe
by Stephan Kulow 01 Apr '11

01 Apr '11

Donnerstag, 31. März 2011 sent speilicke : > State of submit-request #65647 was changed by saschpe: > > new -> declined > > Comment: > description is >400 lines, too long :-) > Where is a limit documented? Greetings, Stephan -- To unsubscribe, e-mail: opensuse-packaging+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-packaging+help(a)opensuse.org

3 4

[opensuse-packaging] Zypper solutions for conflicts in OBS-generated package
by Sandro Andrade 31 Mar '11

31 Mar '11

Hi there, I'm building a new branding package for kdebase4-workspace. Apparently I managed to get it built but when I ask zypper to install it I got a (obviously expected) conflict with kdebase4-workspace-branding-(openSUSE|upstream). The insteresting thing is zypper only provides one solution for the conflict: Solution 1: do not install kdebase4-workspace-branding-IFBa-1.1-4.1.x86_64 Instead of both "do not install branding-IFBa" and "deinstallation of kdebase4-workspace-branding-*" spec file: http://pastebin.com/pV9ngFYT build log: http://pastebin.com/b5uQ8kEf I've built a copy of kdebase4-openSUSE in my home OBS repository and the generated package is installed as expected (zypper presents both solutions) Any hint ? Thanks in advance, Sandro Andrade -- To unsubscribe, e-mail: opensuse-packaging+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-packaging+help(a)opensuse.org

1 0

[opensuse-packaging] openEMR: Folder not found
by Sascha Manns 31 Mar '11

31 Mar '11

Hello Mates, atm i'm trying to update my openEMR Version. But sadly he breaks. OSC says, that Folder "Documentation" can't found. But it is present in the Source. Maybe i have a mistake? Greetings Sascha -- Sincerely Yours Sascha Manns open-slx Community & Support Agent openSUSE Membership Comitee openSUSE Marketing Team Web: http://saigkill.homelinux.net German Community Portal: http://community.open-slx.de -- To unsubscribe, e-mail: opensuse-packaging+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-packaging+help(a)opensuse.org

3 4

[opensuse-packaging] simple/newbie perl module license question
by Greg Freemyer 26 Mar '11

26 Mar '11

All, I'm trying to package a CPAN package whose license statement at cpan is: === Copyright (C) 2004 Squirrel Consultancy This library is free software; you can redistribute it and/or modify it under the same terms as Perl itself, either Perl version 5.6.0 or, at your option, any other version of Perl 5 you may have available. === What do I put in the specfile as a license? Thanks Greg -- To unsubscribe, e-mail: opensuse-packaging+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-packaging+help(a)opensuse.org

2 3

[opensuse-packaging] Coping with the recent Boost update
by Philipp Thomas 26 Mar '11

26 Mar '11

Boost 1.46.0 was checked into factory not long ago (and will get an update to 1.46.1 in the next days). The main change that wasn't mentioned in the changes and thus escaped me was that beginning with 1.46.0 boost::filesystem will switch its default API from v2 to v3 (see http://www.boost.org/doc/libs/1_46_1/libs/filesystem/v3/doc/index.htm) This will cause packages that use boost::filesystem and that don't support v3 to fail. There are three possible ways to fix the breakage: 1) Adapt the code to work with v3 2) Adapt the code to work with v2 or v3 3) Let the code use the v2 API. The last one is the easiest but the v2 API will go with 1.48. The changes in the API are described in http://www.boost.org/doc/libs/1_46_1/libs/filesystem/v3/doc/deprecated.html. Philipp -- To unsubscribe, e-mail: opensuse-packaging+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-packaging+help(a)opensuse.org

10 28

[opensuse-packaging] owner of the "server:/php/SLE_10" repository
by Stephen J. Butler 25 Mar '11

25 Mar '11

Apologies if this is the wrong list. In that case, if someone could point me in the right direction I'd appreciate it. I am trying to track down who owns/is responsible for the repository at: http://download.opensuse.org/repositories/server:/php/SLE_10/ I just noticed that all the php rpms have disappeared, and I'd like to ask why. -- Stephen Joseph Butler IV | Science is what we understand well enough sbutler.typepad.com/pgp.asc | to explain to a computer. Art is every- UIUC CITES-ICS | thing else we do. -- Donald Knuth -- To unsubscribe, e-mail: opensuse-packaging+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-packaging+help(a)opensuse.org

3 5

[opensuse-packaging] upstream source contains .gif files.
by Paul Elliott 25 Mar '11

25 Mar '11

My upstream source contains .gif files that are not essential. If I delete these file and never use them, can I use this tarball as my pristine source, or must I resource? Thank You. P.S. there are a lot of complicated rules to create a package. -- Paul Elliott 1(512)837-1096 pelliott(a)BlackPatchPanel.com PMB 181, 11900 Metric Blvd Suite J http://www.free.blackpatchpanel.com/pme/ Austin TX 78758-3117

3 3

[opensuse-packaging] Question about script-without-shebang
by Sascha Manns 24 Mar '11

24 Mar '11

Hello Mates, atm i'm updating the Packages in medical. In one case a have a lot of messages like: freediams.x86_64: W: script-without-shebang /usr/share/freediams/doc/freediams/en/html/_export/xhtml/en/manuals/freediams/install_usb.xhtml To solve that i've tried: for all in %{buildroot}%{_datadir}/%{name}/doc/%{name} `find -type f`; do chmod -x $all done But now i'm got: + for all in /usr/src/packages/BUILDROOT/freediams-0.5.4-1.x86_64/usr/share/freediams/doc/freediams '`find -type f`' + chmod -x ./doc/api-Doxyfile + for all in /usr/src/packages/BUILDROOT/freediams-0.5.4-1.x86_64/usr/share/freediams/doc/freediams '`find -type f`' + chmod -x ./doc/usermanuals chmod: cannot access `./doc/usermanuals': No such file or directory Does anyone know why it searches explicit doc/usermanuals if they aren't present? Best Sascha -- Sincerely Yours Sascha Manns open-slx Community & Support Agent openSUSE Membership Comitee openSUSE Marketing Team Web: http://saigkill.homelinux.net German Community Portal: http://community.open-slx.de -- To unsubscribe, e-mail: opensuse-packaging+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-packaging+help(a)opensuse.org

4 4

[opensuse-packaging] Help with tideEditor at x86_64
by Filipe Pires Alvarenga Fernandes 24 Mar '11

24 Mar '11

Hi, Can anyone help me figure out how to define the QTDIR in x86_64. The x86 works fine, but the package doesn't build in 64arch. https://build.opensuse.org/package/live_build_log?arch=x86_64&package=tideE… Thanks, Filipe. -- To unsubscribe, e-mail: opensuse-packaging+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-packaging+help(a)opensuse.org

5 10

[opensuse-packaging] help needed to fix conflict in file series.conf
by doiggl＠velocitynet.com.au 23 Mar '11

23 Mar '11

Hello, How do I fix the error 'conflict in file series.conf' listed at [1] Ive asked at [2] too , but no luck. Thanks Glenn [1] https://build.opensuse.org/package/view_file?expand=0&file=series.conf&pack… [2] http://lists.opensuse.org/opensuse-kernel/2011-03/msg00055.html My series.conf only has these lines in it. patches.rpmify/reiser4-for-2.6.37.patch patches.kernel.org/patch-2.6.37.1 patches.kernel.org/patch-2.6.37.1-2 patches.kernel.org/patch-2.6.37.2-3 patches.kernel.org/patch-2.6.37.3-4 project detail https://build.opensuse.org/package/files?package=kernel-reiser4&project=hom… -- To unsubscribe, e-mail: opensuse-packaging+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-packaging+help(a)opensuse.org

2 1

[opensuse-packaging] Icon themes and branding packages...
by Nelson Marques 22 Mar '11

22 Mar '11

Dear all, I'm currently packaging the latest version (0.9) of the Faenza icon theme for GNOME, one of the nicest in my opinion, though a bit squarish. The main goal is to provide this icon theme for GNOME:Ayatana project since it features all the required icons for the new functions in the Ubuntu/Ayatana indicators (specially on monochrome icons). For those wondering, yes, this is one of the few 3rd party icon themes that provides nearly all icons for a default openSUSE GNOME installation (except for YaST). This icon theme provides icons for many distributions (Fedora, Mandriva, Frugalware, Debian, openSUSE, Ubuntu, GNOME, etc). I'm currently deleting all of those icons except for openSUSE and GNOME and would like to make two branding packages (one for GNOME/upstream, and another for openSUSE). Anyone could point me some online documentation or icon themes example packages where I can see a bit more about this 'branding packages' ? Thanks in advance, NM -- Nelson Marques /* As cicatrizes lembram-nos de onde estivemos, mas não ditam para onde vamos */ -- To unsubscribe, e-mail: opensuse-packaging+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-packaging+help(a)opensuse.org

2 3

[opensuse-packaging] BuildRequires from "external" repository
by Stian Viskjer 21 Mar '11

21 Mar '11

Hi, I'm trying to update alienarena to 7.51 [1] and I'm having some issues building on openSUSE 11.2 (and SLE 11) This version requires autoconf >= 2.65. openSUSE:11.2/standard has 2.63. devel:tools:building/openSUSE_11.2 has 2.65 and 2.68. After some Googling [2] I've done a "osc meta proj -e" and added devel:tools:building/openSUSE_11.2 for openSUSE_11.2 and it builds OK, but is this the proper way of solving this? [1] https://build.opensuse.org/package/show?package=alienarena&project=home%3Ai… [2] http://en.opensuse.org/openSUSE:Packaging_Java#Sun_Java -- bob -- To unsubscribe, e-mail: opensuse-packaging+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-packaging+help(a)opensuse.org

3 3

[opensuse-packaging] Packaging wicd for 11.4, dbus security issue
by R. Tyler Croy 21 Mar '11

21 Mar '11

Wicd has some issues on 11.4 due to the upgrade to Python 2.7, and as such I'm trying to package up the latest tip of their bazaar tree on Launchpad. wicd.x86_64: E: suse-dbus-unauthorized-service (Badness: 10000) /etc/dbus-1/system.d/wicd.conf The package installs a DBUS system service file. If the package is intended for inclusion in any SUSE product please open a bug report to request review of the service by the security team. What confuses me about this is that wicd was already packaged at one point for 11.3, so I don't understand why I'm getting this badness now. Aside from that, I can open a bug report with the SUSE security team, but is there anything I can do on `osc build` to side-step that check and get a testable package in a repo on build.opensuse.org? - R. Tyler Croy -------------------------------------- Code: http://github.com/rtyler Chatter: http://twitter.com/agentdero http://identi.ca/agentdero

6 9

[opensuse-packaging] gcc 4.6 ante portas
by Stephan Kulow 18 Mar '11

18 Mar '11

Hi, I bet most of you follow the gcc news as first thing in the morning, but for those that don't: gcc 4.6 is in release mode, so it won't be long before it's released. A prerelease is already in factory as gcc46, but won't be default before our packages are ready to support it. To prepare for this, Dr.Richard and me prepared a project with the currently failing packages. Short version: http://is.gd/wJxCY7 Long version: https://build.opensuse.org/project/monitor?commit=Filter%3A&failed=1&pkgnam… This project's purpose is mainly to give a count down for the readyness of factory for gcc 4.6. If you want to fix a package for gcc46, you can branch normally and then do osc build --alternative-project=openSUSE:Factory:Staging:Gcc46 It would be great if some volunteer, because for most packages it's the same set of problem. The biggest one right now is that cstdlib is no longer included by default, so you need to change e.g. size_t to std::size_t - or add <cstdlib> Greetings, Stephan -- To unsubscribe, e-mail: opensuse-packaging+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-packaging+help(a)opensuse.org

2 1

[opensuse-packaging] Django packaging
by aledr 18 Mar '11

18 Mar '11

Hi list... Django[1], has some parallel versions running out there. It has 1.1.x and 1.2.x stable series and a new 1.3.x series soon. We have 1.2.x packaged as python-django in d:l:python but we need a decision for 1.3.x series. It will introduce some minor incompatible changes as you can see in the (in development) release notes here[2]. Shall we keep python-django (for 1.2) and create python-django13 or stick with only python-django? [1]: http://www.djangoproject.com [2]: http://docs.djangoproject.com/en/dev/releases/1.3/#backwards-incompatible-c… -- [ ]'s Aledr - Alexandre "OpenSource Solutions for SmallBusiness Problems" -- To unsubscribe, e-mail: opensuse-packaging+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-packaging+help(a)opensuse.org

2 2

[opensuse-packaging] Call for testers: SSE/MMX/SSSE3 powered zlib
by Cristian Rodríguez 16 Mar '11

16 Mar '11

Hi: Brave testers, will be cool if you can install an experimental/development version of zlib, that uses SSE/MMX/SSSE3 to improve the performance of the library from 2 to 6 times, depending what features your CPU support. (determined at runtime) If you want to contribute, add the following repository to zypper http://download.opensuse.org/repositories/home:/elvigia:/zlib/openSUSE_11.4 and dup from it. (if 404, it hasnt published yet) It works just fine in two x86_64 machines I have used, but Im interested in getting feedback from 32 bit users,specially those running less than current CPUs. Finally please note that zlib is used by almost everything,either directly or indirectly and if something goes wrong your system will likely become unusable. Im looking forward to your feedback. -- To unsubscribe, e-mail: opensuse-packaging+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-packaging+help(a)opensuse.org

2 2

[opensuse-packaging] upgrading nasm to 2.09.07
by Per Jessen 16 Mar '11

16 Mar '11

Okay, I need help - I've made my way through Andreas' page: http://lizards.opensuse.org/2009/06/20/opensuse-factory-fixing-packages/ and I've built things locally, worked fine. Then I did "osc commit" etcetera, and I notice that it didn't work quite so well: osc results openSUSE_11.2 x86_64 failed openSUSE_11.2 i586 failed openSUSE_11.3 i586 failed openSUSE_11.3 x86_64 failed openSUSE_11.4 i586 failed openSUSE_11.4 x86_64 failed openSUSE_Factory i586 failed openSUSE_Factory x86_64 failed SLE_10 i586 failed SLE_10 x86_64 failed SLE_11_SP1 i586 failed SLE_11_SP1 x86_64 failed I checked the build log and found this: error: File /usr/src/packages/SOURCES/nasm-2.09.07.tar.bz2: No such file or directory nasm-2.09.07.tar.bz2 is the new tarball. What am I missing here? -- Per Jessen, Zürich (10.4°C) -- To unsubscribe, e-mail: opensuse-packaging+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-packaging+help(a)opensuse.org

6 14

[opensuse-packaging] Running mkinitrd in %unpost and %post
by Javier Llorente 16 Mar '11

16 Mar '11

Hello list-mates, Currently, if you uninstall bootsplash from your system, you'd see the boosplash image when you boot up/shutdown your computer. Is it a good idea to run mkinitrd in %postun so that you get no bootsplash image after uninstalling it? I think it makes sense. %postun %{insserv_cleanup} /sbin/mkinitrd_setup +if test -s /etc/sysconfig/bootloader ; then +/sbin/mkinitrd +fi Furthermore, some people have reported that they get no bootsplash after a KDE install from the 11.4 Net ISO. Besides this, I have added support for more resolutions. So, I was also thinking about running mkinitrd in % post to make sure they get a bootsplash image %post %{fillup_only -ns bootsplash branding-openSUSE } perl -pi -e 's/^(THEME=).*/$1"openSUSE"/' /etc/sysconfig/bootsplash +if test -s /etc/sysconfig/bootloader ; then +/sbin/mkinitrd +fi What I don't want is users suffering due to lots of mkinitrds. How probable would having updates/installs that run mknitrd several times be? Greetings, -- Javier Llorente

2 1

[opensuse-packaging] packaging policy on mysql database changes
by Ralf Lang 15 Mar '11

15 Mar '11

Hi folks, is it valid for an OpenSUSE package to create or alter mysql databases during its installation / removal? I found no policy on that. -- Ralf Lang Linux Consultant / Developer B1 Systems GmbH Osterfeldstraße 7 / 85088 Vohburg / http://www.b1-systems.de GF: Ralph Dehner / Unternehmenssitz: Vohburg / AG: Ingolstadt,HRB 3537 -- To unsubscribe, e-mail: opensuse-packaging+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-packaging+help(a)opensuse.org

3 2

[opensuse-packaging] upgrading nasm
by Per Jessen 15 Mar '11

15 Mar '11

(newbie alert) All I really want to do is apply a minor patch to nasm to make the preprocessor work for 64bit stack arguments too. However once I got started I noticed that the latest nasm stable is 2.09.07, whereas our current version is 2.07. I can easily upgrade it of course, but are there any other considerations I need to consider? -- Per Jessen, Zürich (15.4°C) -- To unsubscribe, e-mail: opensuse-packaging+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-packaging+help(a)opensuse.org

3 3

[opensuse-packaging] newbie alert - why do I have to be root to run a build?
by Per Jessen 15 Mar '11

15 Mar '11

Earlier today, I asked for a contributors howto, and Andreas very kindly pointed me to this: http://lizards.opensuse.org/2009/06/20/opensuse-factory-fixing-packages/ Going through this step by step, when I do "osc build openSUSE_Factory", I'm asked to su to root - why? (it seems unnecessary). /Per Jessen, Zürich -- Per Jessen, Zürich (15.6°C) -- To unsubscribe, e-mail: opensuse-packaging+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-packaging+help(a)opensuse.org

10 15

[opensuse-packaging] Looking for a home for a new package: dvtm
by R. Tyler Croy 14 Mar '11

14 Mar '11

Howdy all, I've packaged up a little tool that I use at home called `dvtm` (I am not the original author): <http://www.brain-dump.org/projects/dvtm/> In short, dvtm is a purely console-based tiling "window manager". Imagine a cross between GNU/screen and XMonad or dwm. I've currently got a package all set up here: <https://build.opensuse.org/package/show?package=dvtm&project=home%3Aagentde…> I'm wondering what I can do to get this package included in a more mainstream repository, and which repository it would make sense to go in to? - R. Tyler Croy -------------------------------------- Code: http://github.com/rtyler Chatter: http://twitter.com/agentdero http://identi.ca/agentdero

3 2

[opensuse-packaging] kde4_knotification_requires macro?
by Sascha Manns 13 Mar '11

13 Mar '11

Hello Mates, atm i' building kvirustotal. After the normal building RPMLINT says: kvirustotal.x86_64: W: suse-kde4-missing-dependency kde4_knotification_requires So i changed the spec to: BuildRoot: %{_tmppath}/%{name}-%{version}-build %kde4_runtime_requires %kde4_knotification_requires But now it says: Unknown tag: %kde4_knotification_requires Maybe it is a special package needed to solve this issue? cu Sascha -- Sincerely Yours Sascha Manns open-slx Community & Support Agent openSUSE Membership Comitee openSUSE Marketing Team Web: http://saigkill.homelinux.net German Community Portal: http://community.open-slx.de -- To unsubscribe, e-mail: opensuse-packaging+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-packaging+help(a)opensuse.org

3 3

[opensuse-packaging] How to clone a project
by Ilya Chernykh 11 Mar '11

11 Mar '11

Hi! I want to clone a project with some tens of packages. I also want that the branched project was updated from the source but certain changes applied. Can I quick and easy move all of packages from one project to another without manually entering each name? -- To unsubscribe, e-mail: opensuse-packaging+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-packaging+help(a)opensuse.org

1 0

[opensuse-packaging] shutter Package
by Sascha Manns 11 Mar '11

11 Mar '11

Hello Mates, atm i have a little Problem with shutter. If i start it from the console i'm getting: sascha@linux:~/osc/openSUSE:Factory:Contrib/TeXmacs> shutter WARNING: Net::DBus::GLib is missing --> Ubuntu One support will be disabled! /usr/bin/perl: symbol lookup error: /usr/lib/perl5/vendor_perl/5.12.3/x86_64-linux-thread- multi/auto/Locale/gettext/gettext.so: undefined symbol: Perl_pad_sv Can anyone reproduce this? Otherwise that is a local Problem from my machine. Have a nice day... Sascha -- Sincerely Yours Sascha Manns open-slx Community & Support Agent openSUSE Membership Comitee openSUSE Marketing Team Blog: http://saigkill.wordpress.com German Community Portal: http://community.open-slx.de -- To unsubscribe, e-mail: opensuse-packaging+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-packaging+help(a)opensuse.org

1 2

[opensuse-packaging] RPM 4.9.0
by Cristian Morales Vega 11 Mar '11

11 Mar '11

Now that 11.4 has been released, when Factory will start to use RPM 4.9.0? And... what that means to packagers? * "Dependency generators are now pluggable. Arbitrary number of dependency types is supported, new types can be added through a drop-in directory and file classification is now done with a combination of path and libmagic-type include/exclude regular expressions (XXX add link to documentation once it exists)" How they exactly work? Something should be changed about %wx_requires? * "EXPERIMENTAL support for package "collections" which are sort of like named triggers that only run once within a transaction. This can be used for example to avoid redundant calls for cache updates etc. (XXX add link to documentation once it exists)" Experimental? Should we use this instead of multiple calls to gtk-update-icon-cache? It's expected that openSUSE 11.4 + 1 will use a newer RPM where collections are no longer experimental? * "Short-circuiting binary builds is now allowed by rpmbuild for developer convenience while testing. Short-circuited packages are tainted with an unsatisfiable dependency to limit their use for the intended testing-only purpose." How? Is this possible through "osc build"? -- To unsubscribe, e-mail: opensuse-packaging+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-packaging+help(a)opensuse.org

1 0

[opensuse-packaging] osc mbranch broken only in 11.4
by Cristian Rodríguez 11 Mar '11

11 Mar '11

Hi: Trying to use osc mbranch in 11.4 always result in an error after submitting fixes to the server % osc ci cristian@linux tzdata2011c.tar.gz mentioned in spec file does not exist. tzcode2011c.tar.gz mentioned in spec file does not exist. tzdata2011c.tar.gz mentioned in spec file does not exist. tzcode2011c.tar.gz mentioned in spec file does not exist. tzdata2011c.tar.gz mentioned in spec file does not exist. tzcode2011c.tar.gz mentioned in spec file does not exist. Sending timezone-java.changes Sending timezone-java.spec Sending timezone.changes Sending timezone.spec Deleting tzcode2011b.tar.gz Deleting tzdata2011b.tar.gz Sending _service Transmitting file data ...Server returned an error: HTTP Error 404: Not Found package 'timezone.openSUSE_11.4' does not exist timezone.openSUSE_11.4 % osc up cristian@linux Your working copy '.' is in an inconsistent state. Please run 'osc repairwc .' (Note this might _remove_ files from the .osc/ dir). Please check the state of the working copy afterwards (via 'osc status .') timezone.openSUSE_11.4 % osc repairwc . cristian@linux done. Please check the state of the wc (via 'osc status .'). timezone.openSUSE_11.4 % osc status cristian@linux ? _service:download_url:tzcode2011c.tar.gz ? _service:download_url:tzdata2011c.tar.gz A _service M timezone-java.changes M timezone-java.spec M timezone.changes M timezone.spec D tzcode2011b.tar.gz D tzdata2011b.tar.gz timezone.openSUSE_11.4 % osc ci cristian@linux tzdata2011c.tar.gz mentioned in spec file does not exist. tzcode2011c.tar.gz mentioned in spec file does not exist. tzdata2011c.tar.gz mentioned in spec file does not exist. tzcode2011c.tar.gz mentioned in spec file does not exist. tzdata2011c.tar.gz mentioned in spec file does not exist. tzcode2011c.tar.gz mentioned in spec file does not exist. Working copy '/home/cristian/abuild/home:elvigia:branches:OBS_Maintained:timezone/timezone.openSUSE_11.4' is out of date (rev ba145f870d8dc6451d3a2eefe17b9079 vs rev 68f1136b1bdbf6357d1f4d87d6a06484). Looks as if you need to update it first. timezone.openSUSE_11.4 % osc up cristian@linux failed to add file '_service' file/dir with the same name already exists timezone.openSUSE_11.4 % rm _service cristian@linux timezone.openSUSE_11.4 % osc up cristian@linux resuming broken update... A _service D tzcode2011b.tar.gz D tzdata2011b.tar.gz G timezone-java.spec G timezone.spec At revision 68f1136b1bdbf6357d1f4d87d6a06484. At revision 68f1136b1bdbf6357d1f4d87d6a06484. timezone.openSUSE_11.4 % osc ci cristian@linux tzdata2011c.tar.gz mentioned in spec file does not exist. tzcode2011c.tar.gz mentioned in spec file does not exist. tzdata2011c.tar.gz mentioned in spec file does not exist. tzcode2011c.tar.gz mentioned in spec file does not exist. tzdata2011c.tar.gz mentioned in spec file does not exist. tzcode2011c.tar.gz mentioned in spec file does not exist. Sending _service Server returned an error: HTTP Error 404: Not Found package 'timezone.openSUSE_11.4' does not exist Transmitting file data timezone.openSUSE_11.4 % All other distros do fine, cannot submit fixes for DST changes that will start annoying me on saturday night :-) Any idea ? -- To unsubscribe, e-mail: opensuse-packaging+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-packaging+help(a)opensuse.org

2 2

[opensuse-packaging] undefined symbol: PyUnicodeUCS2_DecodeLatin1
by Ilya Chernykh 11 Mar '11

11 Mar '11

Hi! When running a number of Python packages I encounter the following error message: /usr/lib64/python2.6/site-packages/sip.so: undefined symbol: PyUnicodeUCS2_DecodeLatin1 What should I do to correct this? -- To unsubscribe, e-mail: opensuse-packaging+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-packaging+help(a)opensuse.org

3 3

[opensuse-packaging] service syslog is missed in the runlevels 4
by Ilya Chernykh 10 Mar '11

10 Mar '11

Hi! I get the following message for two packages when building for 11.4 and Factory: insserv: FATAL: service syslog is missed in the runlevels 4 to use service pcscd insserv: exiting now What should I do? -- To unsubscribe, e-mail: opensuse-packaging+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-packaging+help(a)opensuse.org

6 12

[opensuse-packaging] H4 Packaging - Horde 4 Alpha1 out
by Ralf Lang 09 Mar '11

09 Mar '11

Last night I did a test drive of Horde 4 Alpha 1 from pear.horde.org The stuff basically works but unlike the framework components, the apps are not yet fit for packaging. The framework has been split into like 30 pear packages. I will begin packaging them first (and apps only later when they're stable enough). Any help/cooperation welcome, double work to be avoided. I want to develop this in a separate home project and push the thing to server:php:applications in a whole bunch once I am confident it works as desired. See also: http://www.ralf-lang.de/2011/03/09/horde-4-alpha-1-released-pear/ -- Ralf Lang Linux Consultant / Developer B1 Systems GmbH Osterfeldstraße 7 / 85088 Vohburg / http://www.b1-systems.de GF: Ralph Dehner / Unternehmenssitz: Vohburg / AG: Ingolstadt,HRB 3537 -- To unsubscribe, e-mail: opensuse-packaging+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-packaging+help(a)opensuse.org

1 0

[opensuse-packaging] Reproducible .tar.gz compression?
by Cristian Morales Vega 08 Mar '11

08 Mar '11

I have a package that "tar czf"s a directory in the build process. This breaks build-compare since every compression generates a different file. A "tar cjf" (bz2) doesn't suffer from the same problem... Any idea? Can "tar czf" produce reproducible results? TIA -- To unsubscribe, e-mail: opensuse-packaging+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-packaging+help(a)opensuse.org

3 6

[opensuse-packaging] owner of /etc/hotplug{,/usb}
by Chris 08 Mar '11

08 Mar '11

Hi, installer is doing this for "backward compatibility" /usr/bin/install -c -d /usr/src/packages/BUILDROOT/dahdi-tools-2.4.1-0.x86_64/etc/hotplug/usb /usr/bin/install -c -m 644 xpp_fxloader.usermap /usr/src/packages/BUILDROOT/dahdi-tools-2.4.1-0.x86_64/etc/hotplug/usb/ # for backward compatibility and for hotplug users: ln -sf /usr/share/dahdi/xpp_fxloader /usr/src/packages/BUILDROOT/dahdi-tools-2.4.1-0.x86_64/etc/hotplug/usb/ and on 11.4 it results in dahdi-tools-2.4.1-0.x86_64.rpm: directories not owned by a package: - /etc/hotplug - /etc/hotplug/usb Is this perhaps an obsolete DIR and should be changed ? ( to what ?) What is the correct way to fix it. Cheers Chris -- To unsubscribe, e-mail: opensuse-packaging+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-packaging+help(a)opensuse.org

2 2

[opensuse-packaging] Are there any IDEs that know how to package?
by Paul Elliott 08 Mar '11

08 Mar '11

Are there any IDEs that know how to set up the g++/gcc autoconf automake libtool tool chain and also know how to create a debian source package and a rpm spec file? It seems to me that if an IDE only knows how to create the executable, it would not be of very much use to FS developers, because they will eventually have to do the above by hand if the ide does not do it for them. I think that some of the guidelines would require hand tweaking and experience with the software. But I think an IDE should be able to provide a first cut that removes the syntax errors. -- Paul Elliott 1(512)837-1096 pelliott(a)BlackPatchPanel.com PMB 181, 11900 Metric Blvd Suite J http://www.free.blackpatchpanel.com/pme/ Austin TX 78758-3117

1 0

[opensuse-packaging] Please criticize my spec file for maitreya.
by Paul Elliott 07 Mar '11

07 Mar '11

Please criticize my spec file for maitreya. Thank You: ----- # norootforbuild %define dir_name maitreya6 %define font_dir %{_datadir}/fonts/truetype Name: maitreya Version: 6.0.2 Release: 1%{?dist} Summary: Software for Vedic and western astrology Group: Productivity/Other License: GPLv2+ URL: http://www.saravali.de Source0: http://downloads.sourceforge.net/project/maitreya/%{dir_name}/maitreya-6.0.… # fix desktop Patch0: maitreya-desktop.patch # reorder the build order to prevent errors when using gcc --as-needed switch Patch1: maitreya-fix_lib_order.patch BuildRoot: %{_tmppath}/%{name}-%{version}-build BuildRequires: gcc-c++ #opensuse 11.4 and better wants wxWidgets-wxcontainer-devel all others wxGTK- devel %if 0%{?suse_version} >= 1140 BuildRequires: wxWidgets-wxcontainer-devel %else BuildRequires: wxGTK-devel %endif #let build system find dependancies. #Requires: wxGTK,wxBase #mandrivia needs libfontconfig %if 0%{?mdkversion} BuildRequires: libfontconfig-devel BuildRequires: libfontconfig %endif #to verifiy desktop file. BuildRequires: desktop-file-utils #suse checks for dups and the desktop file %if 0%{?suse_version} || 0%{?sles_version} BuildRequires: fdupes BuildRequires: update-desktop-files #suse is a lang package which must be recommended. Recommends: %{name}-lang = %{version} %lang_package %endif %description Free software for western and Vedic astrology (Jyotish). Supports classical Vedic astrology, KP system and parts of Jaimini system. Western part includes Uranian astrology. Platforms: Win32, Linux and UNIX. #normal setup %prep %setup -q %patch0 -p1 %patch1 %build #autoreconf needed because of reorder patch. autoreconf -fi %configure make %{?_smp_mflags} %install make install DESTDIR=$RPM_BUILD_ROOT #find lang is needed because of reasons in #http://fedoraproject.org/wiki/Packaging/Guidelines#Why_do_we_need_to_use_.25find_lang.3F %find_lang %{dir_name} %if 0%{?suse_version} || 0%{?sles_version} # check desktop fits suse specs %suse_update_desktop_file %{dir_name} %endif #check the desktop file. desktop-file-validate %{buildroot}/%{_datadir}/applications/%{dir_name}.desktop %if 0%{?suse_version} || 0%{?sles_version} #if suse do fdupes to detect duplicates. %fdupes -s %{buildroot} %endif %clean rm -rf $RPM_BUILD_ROOT %if 0%{?suse_version} || 0%{?sles_version} #if suse reconfigure for fonts. %post %run_permissions %run_suseconfig_fonts %postun %run_suseconfig_fonts %files %else %files -f %{dir_name}.lang %endif %defattr(-,root,root,-) %doc COPYING README NEWS INSTALL AUTHORS ChangeLog %{_bindir}/* %{_datadir}/applications/%{dir_name}.desktop %{font_dir} %{_datadir}/%{dir_name} %{_datadir}/pixmaps/maitreya.xpm %if 0%{?suse_version} || 0%{?sles_version} %files lang -f %{dir_name}.lang %defattr(-,root,root,-) %endif %changelog -- Paul Elliott 1(512)837-1096 pelliott(a)BlackPatchPanel.com PMB 181, 11900 Metric Blvd Suite J http://www.free.blackpatchpanel.com/pme/ Austin TX 78758-3117

4 5

[opensuse-packaging] perl macro not expanding? %{perl_vendorarch}
by Greg Freemyer 07 Mar '11

07 Mar '11

All, I brought a spec file in from another distro. It used %{perl_vendorarch} which did not expand. I found %perl_vendorarch worked. Is that a expansion bug? If so, I can put it in bugzilla. Thanks Greg -- To unsubscribe, e-mail: opensuse-packaging+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-packaging+help(a)opensuse.org

2 1

[opensuse-packaging] Diff packages?
by Claudio Freire 06 Mar '11

06 Mar '11

Anyone knows how to make diff packages? I've looked around rpm.org, but I couldn't find anything. Our project will be releasing a few betas shortly (and the final release eventaully), and with a -data package of ~400MB I'd like to provide diff packages so that the transition from beta1 to beta2 to final is as painless as possible. -- To unsubscribe, e-mail: opensuse-packaging+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-packaging+help(a)opensuse.org

2 1

[opensuse-packaging] shutter: Question a symbol lookup error
by Sascha Manns 06 Mar '11

06 Mar '11

Hello Mates, today i've tried to start shutter. But i've got: /usr/bin/perl: symbol lookup error: /usr/lib/perl5/vendor_perl/5.12.3/x86_64-linux-thread- multi/auto/Gnome2/Wnck/Wnck.so: undefined symbol: Perl_pad_sv Maybe anyone knows how to handle this? -- Sincerely Yours Sascha Manns open-slx Community & Support Agent openSUSE Membership Comitee openSUSE Marketing Team Blog: http://saigkill.wordpress.com German Community Portal: http://community.open-slx.de -- To unsubscribe, e-mail: opensuse-packaging+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-packaging+help(a)opensuse.org

2 1

Re: [opensuse-packaging] shutter: Question a symbol lookup error
by Sascha Manns 05 Mar '11

05 Mar '11

Cristian Rodríguez <crrodriguez(a)opensuse.org> wrote at Saturday 05 March 2011: > El 05/03/11 17:19, Sascha Manns escribió: > > Hello Mates, > > > > today i've tried to start shutter. But i've got: > > /usr/bin/perl: symbol lookup error: > > /usr/lib/perl5/vendor_perl/5.12.3/x86_64-linux-thread- > > multi/auto/Gnome2/Wnck/Wnck.so: undefined symbol: Perl_pad_sv > > > > Maybe anyone knows how to handle this? > > is the package that contains > /usr/lib/perl5/vendor_perl/5.12.3/x86_64-linux-thread- > > > multi/auto/Gnome2/Wnck/Wnck.so up to date ? and what package is it > > ? It looks like the Package: perl-Gnome2-Wnck from openSUSE:Factory:Contrib which is based on home:swyear. -- Sincerely Yours Sascha Manns open-slx Community & Support Agent openSUSE Membership Comitee openSUSE Marketing Team Blog: http://saigkill.wordpress.com German Community Portal: http://community.open-slx.de -- To unsubscribe, e-mail: opensuse-packaging+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-packaging+help(a)opensuse.org

1 0

[opensuse-packaging] openSUSE:Tools publish disabled?
by Cristian Morales Vega 01 Mar '11

01 Mar '11

Why is openSUSE:Tools publish disabled? The 11.4 repo is nearly empty -- To unsubscribe, e-mail: opensuse-packaging+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-packaging+help(a)opensuse.org

2 1