April 2010 - openSUSE Packaging - openSUSE Mailing Lists

[opensuse-packaging] OBS binary server currently down
by Adrian Schröter 19 Apr '10

19 Apr '10

JFYI, our build service backend server, which hosts all binaries is currently down due to a failure in the NAS system. fscheck is running and the binary server will hopefully run again in about 30minutes again. However, the schedulers will need to do a cold start, this means they will not schedule new jobs in the next ~ 4 hours. Source submissions are not affected by this. It means, you can submit sources, they will get build as soon the system has recovered. sorry your NAS (network attached storage) -- Adrian Schroeter SUSE Linux Products GmbH email: adrian(a)suse.de -- To unsubscribe, e-mail: opensuse-packaging+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-packaging+help(a)opensuse.org

2 1

[opensuse-packaging] building ramlog-2
by doiggl＠velocitynet.com.au 19 Apr '10

19 Apr '10

Hello - How can i tell if a tar.gz file gets unpacked ok in obs / spec file ? - What fixes can be done to this spec file to correct these errors from the log ? + '[' /usr/src/packages/BUILDROOT/ramlog-2.0.0-44.1.x86_64 '!=' / ']' + rm -rf /usr/src/packages/BUILDROOT/ramlog-2.0.0-44.1.x86_64 + mkdir -p /usr/src/packages/BUILDROOT/ramlog-2.0.0-44.1.x86_64 + mkdir -p -m 755 /usr/src/packages/BUILDROOT/ramlog-2.0.0-44.1.x86_64/etc + mkdir -p -m 755 /usr/src/packages/BUILDROOT/ramlog-2.0.0-44.1.x86_64/etc/init.d + mkdir -p -m 755 /usr/src/packages/BUILDROOT/ramlog-2.0.0-44.1.x86_64/etc/sysconfig + mkdir -p -m 755 /usr/src/packages/BUILDROOT/ramlog-2.0.0-44.1.x86_64/usr/share/man/man8 + mkdir -p -m 755 /usr/src/packages/BUILDROOT/ramlog-2.0.0-44.1.x86_64/etc/cron.daily + install -m 644 RAMLOG-2.0.0/ramlog.conf.upstart /usr/src/packages/BUILDROOT/ramlog-2.0.0-44.1.x86_64/etc/ramlog.conf.upstart install: cannot stat `RAMLOG-2.0.0/ramlog.conf.upstart': No such file or directory error: Bad exit status from /var/tmp/rpm-tmp.ky8ra8 (%install) The tar.gz file [ramlog-2.0.0.tar.gz] has this content # tar -ztvf ramlog-2.0.0.tar.gz drwxr-xr-x tofu/tofu 0 2010-04-12 22:45 ramlog-2.0.0/ -rwxr-xr-x 1001/1001 29492 2010-04-12 17:23 ramlog-2.0.0/ramlog -rwxr-xr-x tofu/tofu 2428 2010-04-12 22:45 ramlog-2.0.0/ramlog.8.gz -rwxr-xr-x tofu/tofu 705 2010-03-13 16:54 ramlog-2.0.0/README -rwxr-xr-x tofu/tofu 6 2010-03-08 12:45 ramlog-2.0.0/VERSION -rwxr-xr-x tofu/tofu 1202 2010-03-08 11:46 ramlog-2.0.0/ramlog.conf -rw-r--r-- tofu/tofu 198 2010-04-07 08:35 ramlog-2.0.0/ramlog.conf.upstart -rwxr-xr-x tofu/tofu 1140 2010-04-12 22:14 ramlog-2.0.0/ChangeLog -rwxr-xr-x tofu/tofu 972 2010-03-13 04:03 ramlog-2.0.0/INSTALL -rwxr-xr-x tofu/tofu 75 2008-06-08 12:28 ramlog-2.0.0/ramlog.cron -rwxr-xr-x tofu/tofu 32398 2008-01-13 11:08 ramlog-2.0.0/COPYING -rwxr-xr-x tofu/tofu 1760 2010-03-13 04:07 ramlog-2.0.0/FAQ -rwxr-xr-x tofu/tofu 61 2008-02-23 09:08 ramlog-2.0.0/ramlog.logrotate Project -> https://build.opensuse.org/package/show?package=ramlog&project=home%3Adoiggl Spec file-> https://build.opensuse.org/package/view_file?file=ramlog.spec&package=ramlo… Last Log - > https://build.opensuse.org/package/live_build_log?arch=x86_64&package=ramlo… Thanks Glenn -- To unsubscribe, e-mail: opensuse-packaging+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-packaging+help(a)opensuse.org

2 1

[opensuse-packaging] OBS key expired
by Schlomo Schapiro 16 Apr '10

16 Apr '10

Hi, is there a way to renew expired GPG keys? Would not want to have all users agree to a new key... Thanks, Schlomo -- To unsubscribe, e-mail: opensuse-packaging+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-packaging+help(a)opensuse.org

2 1

[opensuse-packaging] package replace
by Michal Seben 16 Apr '10

16 Apr '10

Hi all I am preparing package "cronie v 1.4.4" in System:Base repo, this package should replace old "cron 4.4" package. Basically it's the same package. To obsolete old cron I used Provides: cron = 4.2 Obsoletes: cron <= 4.1 But problem in my case is that switching from cron to cronie (even if I use rpm -U) isn't update (but uninstal cron + install cronie), and so macros like : %fillup_and_insserv, %stop_on_removal or %restart_on_update doesn't do the job, all these macros check $FIRST_ARG (or $1) which depend on update/uninstal/install process Result of these issues is that after switching from cron to cronie : cron process isn't running and cron service is always turned on Had anyone solved similar problem ? what about using epoch ? -- To unsubscribe, e-mail: opensuse-packaging+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-packaging+help(a)opensuse.org

3 4

[opensuse-packaging] What is build-mkbaselibs
by Dave Plater 16 Apr '10

16 Apr '10

Hi, I've a strange expansion error in multimedia:apps wavemon, it can't find build-mkbaselibs. An osc search build-mkbaselibs --binary search indicates that it's in openSUSE:tools for every supported rpm based distro except openSUSE. Where is the package the build is looking for? multimedia:apps is building against snapshot and the checked in branch builds successfully against standard. Thanks Dave P -- To unsubscribe, e-mail: opensuse-packaging+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-packaging+help(a)opensuse.org

3 4

[opensuse-packaging] Missin gtk/gtk.h
by Mariusz Fik 12 Apr '10

12 Apr '10

I tried to package codelite in my home repo[1]. The build was succeeded except openSUSE Factory[2]. It can't find a gtk header file <gtk/gtk.h>. How can I fix it? [1] - http://tinyurl.com/yalkjnh [2] - http://tinyurl.com/codelite-buildlog -- Pozdrawiam / Best regards, Mariusz Fik, openSUSE Community Member

3 14

[opensuse-packaging] What do I do with .pyc files?
by Dave Plater 12 Apr '10

12 Apr '10

Hi, I'm updating multimedia:apps solfege and the new version produces a lot of .pyc files on make install which contain text which refers to the path that the file was installed in :- /usr/src/packages/BUILDROOT/solfege-3.16.1-1.x86_64//usr/share/solfege/solfege/ This causes lot's of rpmlint errors ie. ;- solfege.x86_64: E: file-contains-buildroot (Badness: 10000) /usr/share/solfege/solfege/cfg.pyc I understand these files to be compiled python but being a complete novice with python I don't know what to do with them. Thanks for any help. Regards Dave P -- To unsubscribe, e-mail: opensuse-packaging+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-packaging+help(a)opensuse.org

3 13

Re: [opensuse-packaging] Need help fixing gstreamer-0_10-plugins-bad, what is cog?
by Dave Plater 09 Apr '10

09 Apr '10

On 04/09/2010 09:31 AM, Toni wrote: > Am Freitag, 9. April 2010 schrieb Dave Plater: >> Hi, multimedia:libs gstreamer-0_10-plugins-bad is failing to build >> libgstcog for everything except 11.2. The ./config output says for >> factory standard :- >> configure: *** checking feature: Cog plugin *** >> configure: *** for plug-ins: cog *** >> checking for COG... no >> no >> configure: *** These plugins will not be built: cog >> but the 11.2 build finds cog. >> >> My question is what provides cog. I've searched 11.2 packages and can >> only come up with discogs from packman and google brings up a cog >> package which looks multimedia related. >> I'm double posting to packaging and factory. > you need the new orc (The Oil Runtime Compiler) package. > > look here > http://packman.links2linux.de/package/orc > > and add BuildRequires: orc-devel orc to the gstreamer package > >> Thanks >> Dave P > > > Ok I think I see the problem, multimedia:libs orc doesn't provide a devel package but the strange part is the 11.2 build finds cog. The build for factory loads orc and liborc, as does the 11.2 build. I'll have a closer look at the orc package maybe 11.2 liboil has something to do with it? Thanks Dave P -- To unsubscribe, e-mail: opensuse-packaging+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-packaging+help(a)opensuse.org

4 9

Re: [opensuse-packaging] Need help fixing gstreamer-0_10-plugins-bad, what is cog?
by Tejas Guruswamy 09 Apr '10

09 Apr '10

On 09/04/10 09:28, Dave Plater wrote: > On 04/09/2010 09:47 AM, Dave Plater wrote: > >> On 04/09/2010 09:31 AM, Toni wrote: >> >>> Am Freitag, 9. April 2010 schrieb Dave Plater: >>> >>>> Hi, multimedia:libs gstreamer-0_10-plugins-bad is failing to build >>>> libgstcog for everything except 11.2. The ./config output says for >>>> factory standard :- >>>> configure: *** checking feature: Cog plugin *** >>>> configure: *** for plug-ins: cog *** >>>> checking for COG... no >>>> no >>>> configure: *** These plugins will not be built: cog >>>> but the 11.2 build finds cog. >>>> >>>> My question is what provides cog. I've searched 11.2 packages and can >>>> only come up with discogs from packman and google brings up a cog >>>> package which looks multimedia related. >>>> I'm double posting to packaging and factory. >>>> >>> you need the new orc (The Oil Runtime Compiler) package. >>> >>> look here >>> http://packman.links2linux.de/package/orc >>> >>> and add BuildRequires: orc-devel orc to the gstreamer package >>> >>>> Thanks >>>> Dave P >>>> >> Ok I think I see the problem, multimedia:libs orc doesn't provide a devel package but the strange part is the 11.2 build finds cog. The >> build for factory loads orc and liborc, as does the 11.2 build. I'll have a closer look at the orc package maybe 11.2 liboil has something >> to do with it? >> Thanks >> Dave P >> > I'm changing orc-doc to orc-devel to hopefully fix the gstreamer bad > build, thanks to Toni for pointing me in the right direction. > Dave P > Dave, there was a discussion on why there is no orc-devel last month here on -packaging: [opensuse-packaging] compiler / devel files in package http://lists.opensuse.org/opensuse-packaging/2010-03/msg00047.html Sorry if this is redundant info Regards, Tejas -- To unsubscribe, e-mail: opensuse-packaging+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-packaging+help(a)opensuse.org

4 8

[opensuse-packaging] Need help fixing gstreamer-0_10-plugins-bad, what is cog?
by Dave Plater 09 Apr '10

09 Apr '10

Hi, multimedia:libs gstreamer-0_10-plugins-bad is failing to build libgstcog for everything except 11.2. The ./config output says for factory standard :- configure: *** checking feature: Cog plugin *** configure: *** for plug-ins: cog *** checking for COG... no no configure: *** These plugins will not be built: cog but the 11.2 build finds cog. My question is what provides cog. I've searched 11.2 packages and can only come up with discogs from packman and google brings up a cog package which looks multimedia related. I'm double posting to packaging and factory. Thanks Dave P -- To unsubscribe, e-mail: opensuse-packaging+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-packaging+help(a)opensuse.org

1 0