May 2019 - openSUSE Kernel - openSUSE Mailing Lists

[opensuse-kernel] kernel-default-base-2.6.29-5.2.x86_64 rpm errors
by Dave Plater 18 Jul '24

18 Jul '24

Hi, I'm busy updating to the latest factory kernel and have received the following errors from kernel-default-base installation (I did insert a blank dvd during the installation of the rpm by zypper):- WARNING: /lib/modules/2.6.29-rc8-5-default/kernel/drivers/scsi/sd_mod.ko needs unknown symbol crc_t10dif WARNING: /lib/modules/2.6.29-rc8-5-default/kernel/drivers/scsi/sr_mod.ko needs unknown symbol register_cdrom WARNING: /lib/modules/2.6.29-rc8-5-default/kernel/drivers/scsi/sr_mod.ko needs unknown symbol cdrom_ioctl WARNING: /lib/modules/2.6.29-rc8-5-default/kernel/drivers/scsi/sr_mod.ko needs unknown symbol cdrom_media_changed WARNING: /lib/modules/2.6.29-rc8-5-default/kernel/drivers/scsi/sr_mod.ko needs unknown symbol cdrom_get_media_event WARNING: /lib/modules/2.6.29-rc8-5-default/kernel/drivers/scsi/sr_mod.ko needs unknown symbol cdrom_release WARNING: /lib/modules/2.6.29-rc8-5-default/kernel/drivers/scsi/sr_mod.ko needs unknown symbol cdrom_open WARNING: /lib/modules/2.6.29-rc8-5-default/kernel/drivers/scsi/sr_mod.ko needs unknown symbol unregister_cdrom WARNING: /lib/modules/2.6.29-rc8-5-default/kernel/drivers/scsi/sr_mod.ko needs unknown symbol cdrom_number_of_slots And then these errors which I think IIRC happened before when the kernel was first split into three:- Kernel image: /boot/vmlinuz-2.6.29-rc8-5-default Initrd image: /boot/initrd-2.6.29-rc8-5-default Root device: /dev/disk/by-id/ata-WDC_WD800JB-00JJC0_WD-WMAM9RA78067-part3 (/dev/sda3) (mounted on / as xfs) Resume device: /dev/disk/by-id/ata-WDC_WD800JB-00JJC0_WD-WMAM9RA78067-part2 (/dev/sda2) FATAL: Module processor not found. WARNING: no dependencies for kernel module 'processor' found. FATAL: Module thermal not found. WARNING: no dependencies for kernel module 'thermal' found. FATAL: Module ata_generic not found. WARNING: no dependencies for kernel module 'ata_generic' found. FATAL: Module piix not found. WARNING: no dependencies for kernel module 'piix' found. FATAL: Module ide_pci_generic not found. WARNING: no dependencies for kernel module 'ide_pci_generic' found. FATAL: Module fan not found. WARNING: no dependencies for kernel module 'fan' found. FATAL: Module xfs not found. WARNING: no dependencies for kernel module 'xfs' found. FATAL: Module usbhid not found. WARNING: no dependencies for kernel module 'usbhid' found. Kernel Modules: scsi_mod libata ata_piix edd ahci sd_mod usbcore ohci-hcd ehci-hcd uhci-hcd WARNING: /dev/shm/mkinitramfs.0drQsZ/mnt/lib/modules/2.6.29-rc8-5-default/kernel/drivers/scsi/sd_mod.ko needs unknown symbol crc_t10dif Features: block usb resume.userspace resume.kernel Bootsplash: openSUSE (1280x1024) 22669 blocks Should I open a bug report about the errors which are possibly from inserting a dvd while the kernel rpm was installing? Regards Dave P -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-kernel+help(a)opensuse.org

2 2

[opensuse-kernel] x86_64 space consumption
by Felix Miata 22 May '19

22 May '19

I understand that capabilities grow, and variety of hardware grows, but some differences among distros are a puzzle. Here are selected size differences: OS 11.4 OS 13.1 OS 15.0 OS TW F30 Deb 10 Kernel Version 3.0.101 3.12.67 4.12.14 4.19.12 4.19.13 4.19.37 /boot/vmlinuz 4.7M 6.1M 6.8M 7.8M 8.3M 5.0M /boot/initrd 6.6M 6.9M 8.3M 8.7M 15.5M 7.2M /lib/modules/ 132.7M 152.7M 257.1M 269.0M 62.5M 252.9M 1-Has anyone upstream or sideways done or announced anything intended to shrink installed module sizes by omitting various classes of rarely useds or neededs, or otherwise, in general use distros? 2-Is the SLE connection to kernels in Leap responsible for extra modules, some that otherwise wouldn't be included in a FOSS distro? 3-How does Fedora get away with so small an installed module size in /lib/? 4-How does Debian get away with so much smaller /boot/vmlinuz, and not so much either in its initrd? All the above are using defaults for whatever the initrds include. How to tell whether hostonly is enabled I don't know how to tell when there is no dracut config to be found in /etc/ anywhere. Fedora has a very much larger extra vmlinuz-0 and initramfs-0 pair used for Grub rescue modes. -- Evolution as taught in public schools is religion, not science. Team OS/2 ** Reg. Linux User #211409 ** a11y rocks! Felix Miata *** http://fm.no-ip.com/ -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-kernel+owner(a)opensuse.org

6 6

[opensuse-kernel] [PATCH] Sign aarch64 kernels (boo#1134303)
by Guillaume GARDET 07 May '19

07 May '19

Signed-off-by: Guillaume GARDET <guillaume.gardet(a)free.fr> Cc: Andreas Faerber <afaerber(a)suse.de> Cc: Yousaf Kaukab <yousaf.kaukab(a)suse.com> Cc: Matthias Brugger <mbrugger(a)suse.com> --- This patch applies to master, stable and Leap 15.1 branches. It may be applied to SLE15-SP1 branch too. rpm/kernel-binary.spec.in | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/rpm/kernel-binary.spec.in b/rpm/kernel-binary.spec.in index ebadc24c80..9e21e6777c 100644 --- a/rpm/kernel-binary.spec.in +++ b/rpm/kernel-binary.spec.in @@ -477,8 +477,12 @@ done # sign the modules, firmware and possibly the kernel in the buildservice BRP_PESIGN_FILES="" %if %CONFIG_EFI_STUB == "y" +%ifarch aarch64 +BRP_PESIGN_FILES="/boot/Image-%kernelrelease-%build_flavor" +%else BRP_PESIGN_FILES="/boot/vmlinuz-%kernelrelease-%build_flavor" %endif +%endif %if %CONFIG_MODULE_SIG == "y" BRP_PESIGN_FILES="$BRP_PESIGN_FILES *.ko" %endif -- 2.21.0 -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-kernel+owner(a)opensuse.org

2 1

[opensuse-kernel] Compiling Kernel:Stable kernel-default on OBS -- "version mismatch" with just-built kernel-source ?
by PGNet Dev 07 May '19

07 May '19

I'm building a Kernel:stable instance -- as closely as possible, a project clone of the Kernel:stable repo -- that I can patch, etc locally in my home: instance. It's been generally well behaved. Intermittently -- like, now -- I get a 'failed' build, only of the dependent kernel-default pkg, https://build.opensuse.org/project/show/home:pgnd:Kernel:stable ; its parent kernel-source build fine. But, intermittently -- like, now -- I get a 'failed' build, only of the dependent kernel-default pkg; its parent kernel-source builds OK. The build log shows the fail as a 'Kernel release mismatch', https://build.opensuse.org/package/live_build_log/home:pgnd:Kernel:stable/k… ... [ 58s] ++ make -s kernelrelease ARCH=x86 --output-sync -j8 [ 60s] + krel=5.0.8-21.g7bd8353-default [ 60s] + '[' 5.0.8-21.g7bd8353-default '!=' 5.0.9-21.g7bd8353-default ']' [ 60s] + echo 'Kernel release mismatch: 5.0.8-21.g7bd8353-default != 5.0.9-21.g7bd8353-default' [ 60s] Kernel release mismatch: 5.0.8-21.g7bd8353-default != 5.0.9-21.g7bd8353-default [ 60s] + exit 1 [ 60s] error: Bad exit status from /var/tmp/rpm-tmp.kow8W6 (%prep) ... At the time of the fail, kernel-source _had_ built successfully; packages _were_ available as v5.0.9x, https://build.opensuse.org/package/binaries/home:pgnd:Kernel:stable/kernel-… As I understand it, kernel-default is simply derived from my obs instance's kernel-source, https://build.opensuse.org/package/view_file/home:pgnd:Kernel:stable/kernel… <link project="home:pgnd:Kernel:stable" package="kernel-source" cicount="copy" /> To rebuild the entire project, I exec osc wipebinaries home:pgnd:Kernel:stable osc rebuildpac --all home:pgnd:Kernel:stable I thought that's sufficient to clean + rebuild all from scratch ... but it simply re-failed. Other than from a build remnant _oustide_ my OBS build root, I can't see where the "mismatched" v5.0.*8* is originating. What do I need to do to eliminate/avoid this FAIL, & ensure that my kernel-default builds are in-sync with, and using, the parent kernel-source sources? -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-kernel+owner(a)opensuse.org

4 10