June 2015 - openSUSE Kernel - openSUSE Mailing Lists

[opensuse-kernel] kernel-default-base-2.6.29-5.2.x86_64 rpm errors
by Dave Plater 18 Jul '24

18 Jul '24

Hi, I'm busy updating to the latest factory kernel and have received the following errors from kernel-default-base installation (I did insert a blank dvd during the installation of the rpm by zypper):- WARNING: /lib/modules/2.6.29-rc8-5-default/kernel/drivers/scsi/sd_mod.ko needs unknown symbol crc_t10dif WARNING: /lib/modules/2.6.29-rc8-5-default/kernel/drivers/scsi/sr_mod.ko needs unknown symbol register_cdrom WARNING: /lib/modules/2.6.29-rc8-5-default/kernel/drivers/scsi/sr_mod.ko needs unknown symbol cdrom_ioctl WARNING: /lib/modules/2.6.29-rc8-5-default/kernel/drivers/scsi/sr_mod.ko needs unknown symbol cdrom_media_changed WARNING: /lib/modules/2.6.29-rc8-5-default/kernel/drivers/scsi/sr_mod.ko needs unknown symbol cdrom_get_media_event WARNING: /lib/modules/2.6.29-rc8-5-default/kernel/drivers/scsi/sr_mod.ko needs unknown symbol cdrom_release WARNING: /lib/modules/2.6.29-rc8-5-default/kernel/drivers/scsi/sr_mod.ko needs unknown symbol cdrom_open WARNING: /lib/modules/2.6.29-rc8-5-default/kernel/drivers/scsi/sr_mod.ko needs unknown symbol unregister_cdrom WARNING: /lib/modules/2.6.29-rc8-5-default/kernel/drivers/scsi/sr_mod.ko needs unknown symbol cdrom_number_of_slots And then these errors which I think IIRC happened before when the kernel was first split into three:- Kernel image: /boot/vmlinuz-2.6.29-rc8-5-default Initrd image: /boot/initrd-2.6.29-rc8-5-default Root device: /dev/disk/by-id/ata-WDC_WD800JB-00JJC0_WD-WMAM9RA78067-part3 (/dev/sda3) (mounted on / as xfs) Resume device: /dev/disk/by-id/ata-WDC_WD800JB-00JJC0_WD-WMAM9RA78067-part2 (/dev/sda2) FATAL: Module processor not found. WARNING: no dependencies for kernel module 'processor' found. FATAL: Module thermal not found. WARNING: no dependencies for kernel module 'thermal' found. FATAL: Module ata_generic not found. WARNING: no dependencies for kernel module 'ata_generic' found. FATAL: Module piix not found. WARNING: no dependencies for kernel module 'piix' found. FATAL: Module ide_pci_generic not found. WARNING: no dependencies for kernel module 'ide_pci_generic' found. FATAL: Module fan not found. WARNING: no dependencies for kernel module 'fan' found. FATAL: Module xfs not found. WARNING: no dependencies for kernel module 'xfs' found. FATAL: Module usbhid not found. WARNING: no dependencies for kernel module 'usbhid' found. Kernel Modules: scsi_mod libata ata_piix edd ahci sd_mod usbcore ohci-hcd ehci-hcd uhci-hcd WARNING: /dev/shm/mkinitramfs.0drQsZ/mnt/lib/modules/2.6.29-rc8-5-default/kernel/drivers/scsi/sd_mod.ko needs unknown symbol crc_t10dif Features: block usb resume.userspace resume.kernel Bootsplash: openSUSE (1280x1024) 22669 blocks Should I open a bug report about the errors which are possibly from inserting a dvd while the kernel rpm was installing? Regards Dave P -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-kernel+help(a)opensuse.org

2 2

[opensuse-kernel] Kernel:linux-next: ARM
by Matwey V. Kornilov 06 Oct '15

06 Oct '15

Hi, Could we have ARM builds for Kernel:linux-next? The reason behind is that our kernel in Kernel:HEAD usually not even builds for early rc-s due to carefully applied upstream bugs. It would be great to be able to detect build failures as early as possible and report the problems upstream. -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-kernel+owner(a)opensuse.org

3 5

[opensuse-kernel] 32bit 13.2 panic when no apm=off on cmdline
by Felix Miata 20 Sep '15

20 Sep '15

I just spent most of the past several days getting this Intel 2 core E6700 P965/ICH8 RAID1 system switched from 11.4 to 13.1 and 13.2 in multiboot via Grub Legacy on primary partition. To do so, I used a single HD Intel 2 core E7600 mule/testing system with 2 new disks added, using running 13.1's yast to build all RAID devices on the new pair prior to initializing 13.1 installation. I eventually got both 13.1 and 13.2 booting and running satisfactorily, restored an rsync backup of user data to the RAID, then shut down this system and moved the RAID pair to it. 13.1 worked satisfactorily immediately, including NIC config retaining fixed IP on eth0. 13.2 spewed trap/segfault errors in a neverending stream virtually instantly in trying to boot from some cmdline config attempts. Many of the others ended in trap data, blinking keyboard LEDs and frozen screen claiming reboot would occur in 90 seconds. The failsafe stanza provided boot, but during init many errors were spewed on tty1 among normal messages. Before I even thought to try failsafe, I chrooted from 13.1 to zypper up and update kernel from 3.16.6 to 3.16.7, then when that didn't help, TW's 3.18.3, also no help. I booted failsafe taking one more option off cmdline each time about 8 times until the only rescue options left were noresume and apm=off, so apm=off definitely functions to get a working boot, yet not without seeing the error stream on tty1. The last attempt without apm=off produced the frozen screen and keyboard condition. I looked in the mailing list archives and Bugzilla, but didn't find anything I recognized as similar. Is there something journalctl can capture that can help someone help me figure out if this is a 13.2 bug that may have escaped discovery before now? FWIW, installing new kernels via chroot produces 13.2 initrds 50% bigger than those happening on account of zypper up processing. Here out of habit, zypper up/dup excludes adding a new kernel. I zypper al kernel* first, up, unlock, then repeat, so that the new kernel's initrd is guaranteed to be built once only. Also FWIW, 13.1 (like 11.4 did) requires clock=hpet on cmdline to prevent clock apparently overpowering ntp. While asleep last night it gained something like 10 minutes in 6 hours. -- "The wise are known for their understanding, and pleasant words are persuasive." Proverbs 16:21 (New Living Translation) Team OS/2 ** Reg. Linux User #211409 ** a11y rocks! Felix Miata *** http://fm.no-ip.com/ -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-kernel+owner(a)opensuse.org

2 5

[opensuse-kernel] Building vmware kernel modules for kernel stable on 13.2
by Markus Koßmann 26 Jun '15

26 Jun '15

Hello; after installing 4.0.5-4.g56152db-desktop from kernel-stable I wanted to rebuild the vmware kernel-modules. The vmware installer now complains about not finding gcc5. First idea was to install gcc5 from gcc:devel repo with one-click install. But this fails due to a missing dependency on libisl.so.13(64 bit). How to get a working build environment for these modules ? -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-kernel+owner(a)opensuse.org

3 4

[opensuse-kernel] [PATCH] kernel-obs-build: add btrfs to initrd
by Andreas Schwab 23 Jun '15

23 Jun '15

This is needed for kiwi builds. --- rpm/kernel-obs-build.spec.in | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/rpm/kernel-obs-build.spec.in b/rpm/kernel-obs-build.spec.in index 5ea5484..82617f6 100644 --- a/rpm/kernel-obs-build.spec.in +++ b/rpm/kernel-obs-build.spec.in @@ -93,7 +93,7 @@ chmod a+rx /usr/lib/dracut/modules.d/80obs/setup_obs.sh # a longer list to have them also available for qemu cross builds where x86_64 kernel runs in eg. arm env. # this list of modules where available on build workers of build.opensuse.org, so we stay compatible. -export KERNEL_MODULES="loop dm-mod dm-snapshot binfmt-misc fuse kqemu squashfs ext2 ext3 ext4 reiserfs nf_conntrack_ipv6 binfmt_misc virtio_pci virtio_mmio virtio_blk fat vfat nls_cp437 nls_iso8859-1 ibmvscsi ibmvscsic" +export KERNEL_MODULES="loop dm-mod dm-snapshot binfmt-misc fuse kqemu squashfs ext2 ext3 ext4 reiserfs btrfs nf_conntrack_ipv6 binfmt_misc virtio_pci virtio_mmio virtio_blk fat vfat nls_cp437 nls_iso8859-1 ibmvscsi ibmvscsic" # manually load all modules to make sure they're available for i in $KERNEL_MODULES; do -- 2.4.3 -- Andreas Schwab, SUSE Labs, schwab(a)suse.de GPG Key fingerprint = 0196 BAD8 1CE9 1970 F4BE 1748 E4D4 88E3 0EEA B9D7 "And now for something completely different." -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-kernel+owner(a)opensuse.org

2 1

[opensuse-kernel] kernel 3.11.4 fails to build with gcc 5
by Guillaume Gardet 18 Jun '15

18 Jun '15

Hi, I updated kernel-raspberrypi config to get initrd support but it fails to build with gcc 5. :( It is a kernel 3.11.4 where I added include/linux/compiler-gcc5.h Any idea how to fix it? https://build.opensuse.org/package/show/devel:ARM:Factory:Contrib:Raspberry… Guillaume -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-kernel+owner(a)opensuse.org

2 1

[opensuse-kernel] Support for Banana Pi
by Jeff Mahoney 12 Jun '15

12 Jun '15

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi all - For some time I've had a Banana Pi device running an openSUSE 13.2 image that I downloaded from the Banana Pi site. Over time, I'd been gradually dragging it forward with self-built vendor kernels and u-boot, hoping that it wouldn't fall apart. The other day, I installed the Kernel:stable kernel-default and the Factory u-boot and it all just worked! Since the openSUSE ARM team has done such a fantastic job getting all of this stuff integrated, I decided to see what was necessary to get real out-of-the-box support set up. The effort was literally just adding 6 lines to two files. Super easy! So, I'm happy to share the results: https://en.opensuse.org/HCL:BananaPi The next time the Tumbleweed JeOS images are built, they will include Banana Pi support! Thanks to Dirk for his help and encouragement getting this included. Great work, team! - -Jeff - -- Jeff Mahoney SUSE Labs -----BEGIN PGP SIGNATURE----- Version: GnuPG/MacGPG2 v2.0.19 (Darwin) iQIcBAEBAgAGBQJVeuTnAAoJEB57S2MheeWyXJ8P/AghXdWxEOKkVMiQR94Fh7BX 7+XSYLaPaFRp1QqPkzT2ybeVfHqQVGCCbn0XZAc/B+5N0pQPZ/HCA0kClJy1cwUH hIWO8byqgKfe/BsVs8/rvfuKE4SYkzTGFnrKA9jL57oSm5lKxj1sH8OkXuUoqO1O y7y6nGdPrO/f9WSUefwfvp4XJ8jVwa+bS+nubxqBy0fuc3ICNWnwrRMbc94cAcnl QPbECxt+XjOxRXmMUY3f8dsg3y561EuPqE+v+XcnPR0TEw1AxjmDbDDcOe0pGGim NCfoIEq1Cy88+Uc8QVqSMAownOZJ+9fxgM3xCBPx7xZU13W9uxExBuaS2rz8alyu nEt75PAUvmIapxJblQhTDFlYeMB6Yi4MMbbVu2Ofs2PCZfGJhrunbc0eAl1N05dK +9MVEY5oR9Ukuc63mh+Yu/kS/d2inSiL5Z0hkZcF2RXOwKOqHnoYJaHxXwLVEZvp mfzHfokb2f+AYRrJoFOysCp3ICgvuDxodZPrqpnujNeXlaXYTRJSMwYdmJbccIlT TKOTrYLynmeModdk0+8D9w7CTDXSTkBvwHN8iFdo8o4aniLfmbNYyg/n7r7oxLfb 75xhOldSSRa8iCdjRJmB1BMh6n0WvepZXTrdrHxVKbn/H36vIu6nl27mTcGMPaX9 WMbZzJJ+n764ggtyvd7T =jSja -----END PGP SIGNATURE----- -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-kernel+owner(a)opensuse.org

1 1

[opensuse-kernel] processes stuck on NFS ('D' state) with 4.0.4 kernel
by Dirk Müller 10 Jun '15

10 Jun '15

Hi, ever since my upgrade to Kernel 4.0 I have randomly processes getting stuck in D state for minutes and hours, the backtrace is: [763300.065765] ffff880492d9fa88 ffffffff81e15480 ffff880493aa6590 ffff8807f75cc5d0 [763300.065766] ffff880492d9ffd8 ffff88081dfac1d8 0000000000000082 ffffffffa0682d00 [763300.065768] ffff880492d9fdf8 ffff880492d9faa8 ffffffff8162c057 ffff8807eb09dde8 [763300.065769] Call Trace: [763300.065776] [<ffffffff8162c057>] schedule+0x37/0x90 [763300.065787] [<ffffffffa0682d31>] rpc_wait_bit_killable+0x31/0x80 [sunrpc] [763300.065798] [<ffffffff8162c42d>] __wait_on_bit+0x5d/0x90 [763300.065800] [<ffffffff8162c4ce>] out_of_line_wait_on_bit+0x6e/0x80 [763300.065805] [<ffffffffa0683e17>] __rpc_execute+0x137/0x410 [sunrpc] [763300.065810] [<ffffffffa067b12d>] rpc_run_task+0x6d/0x90 [sunrpc] [763300.065814] [<ffffffffa067b194>] rpc_call_sync+0x44/0xa0 [sunrpc] [763300.065817] [<ffffffffa0759596>] nfs3_rpc_wrapper.constprop.11+0x66/0xa0 [nfsv3] [763300.065820] [<ffffffffa075a118>] nfs3_proc_getattr+0x48/0x90 [nfsv3] [763300.065826] [<ffffffffa071b9b5>] __nfs_revalidate_inode+0xb5/0x2e0 [nfs] [763300.065831] [<ffffffffa0713b4b>] nfs_weak_revalidate+0x4b/0xf0 [nfs] [763300.065835] [<ffffffff811d88aa>] complete_walk+0x8a/0xe0 [763300.065838] [<ffffffff811dd0de>] path_lookupat+0x2e/0x6e0 [763300.065840] [<ffffffff811dd7b6>] filename_lookup+0x26/0xc0 [763300.065842] [<ffffffff811df4a8>] user_path_at_empty+0x48/0x80 [763300.065844] [<ffffffff811d38a6>] vfs_fstatat+0x46/0x90 [763300.065847] [<ffffffff811d3d8f>] SYSC_newlstat+0x1f/0x40 [763300.065849] [<ffffffff8162fc8d>] system_call_fastpath+0x16/0x1b [763300.065860] [<00007ff16419afe5>] 0x7ff16419afe5 the "funny" thing is that when I do lsof -p <pid>, the process continues as if nothing happened. Anyone got an idea how to debug this further? is this a known problem? Thanks, Dirk -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-kernel+owner(a)opensuse.org

1 0

[opensuse-kernel] [PATCH] ARM: config: Sync more settings with x86_64
by Dirk Müller 08 Jun '15

08 Jun '15

Compile in modules that are =y on x86_64, remove modules that are not compiled on x86_64 --- config/arm64/default | 104 +++++++++++++++++++++++++++++++++---------------- config/arm64/vanilla | 104 +++++++++++++++++++++++++++++++++---------------- config/armv7hl/default | 18 ++++----- config/armv7hl/lpae | 18 ++++----- config/armv7hl/vanilla | 18 ++++----- 5 files changed, 169 insertions(+), 93 deletions(-) diff --git a/config/arm64/default b/config/arm64/default index 47d8e45..d340733 100644 --- a/config/arm64/default +++ b/config/arm64/default @@ -520,7 +520,7 @@ CONFIG_ARM_CPUIDLE=y # CONFIG_CPU_FREQ=y CONFIG_CPU_FREQ_GOV_COMMON=y -CONFIG_CPU_FREQ_STAT=y +CONFIG_CPU_FREQ_STAT=m CONFIG_CPU_FREQ_STAT_DETAILS=y # CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set # CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set @@ -872,7 +872,7 @@ CONFIG_NFT_REJECT_IPV4=m CONFIG_NF_TABLES_ARP=m CONFIG_NF_LOG_ARP=m CONFIG_NF_LOG_IPV4=m -CONFIG_NF_REJECT_IPV4=m +CONFIG_NF_REJECT_IPV4=y CONFIG_NF_NAT_IPV4=m CONFIG_NFT_CHAIN_NAT_IPV4=m CONFIG_NF_NAT_MASQUERADE_IPV4=m @@ -912,7 +912,7 @@ CONFIG_NF_CONNTRACK_IPV6=m CONFIG_NF_TABLES_IPV6=m CONFIG_NFT_CHAIN_ROUTE_IPV6=m CONFIG_NFT_REJECT_IPV6=m -CONFIG_NF_REJECT_IPV6=m +CONFIG_NF_REJECT_IPV6=y CONFIG_NF_LOG_IPV6=m CONFIG_NF_NAT_IPV6=m CONFIG_NFT_CHAIN_NAT_IPV6=m @@ -1188,19 +1188,17 @@ CONFIG_CAN_LEDS=y CONFIG_CAN_XILINXCAN=m CONFIG_CAN_SJA1000=m # CONFIG_CAN_SJA1000_ISA is not set -CONFIG_CAN_SJA1000_PLATFORM=m +# CONFIG_CAN_SJA1000_PLATFORM is not set CONFIG_CAN_EMS_PCI=m CONFIG_CAN_PEAK_PCI=m CONFIG_CAN_PEAK_PCIEC=y CONFIG_CAN_KVASER_PCI=m CONFIG_CAN_PLX_PCI=m CONFIG_CAN_C_CAN=m -CONFIG_CAN_C_CAN_PLATFORM=m +# CONFIG_CAN_C_CAN_PLATFORM is not set CONFIG_CAN_C_CAN_PCI=m CONFIG_CAN_M_CAN=m -CONFIG_CAN_CC770=m -# CONFIG_CAN_CC770_ISA is not set -CONFIG_CAN_CC770_PLATFORM=m +# CONFIG_CAN_CC770 is not set # # CAN SPI interfaces @@ -1836,7 +1834,7 @@ CONFIG_SCSI_OSD_ULD=m CONFIG_SCSI_OSD_DPRINT_SENSE=1 # CONFIG_SCSI_OSD_DEBUG is not set CONFIG_HAVE_PATA_PLATFORM=y -CONFIG_ATA=m +CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set CONFIG_ATA_VERBOSE_ERROR=y CONFIG_SATA_PMP=y @@ -1844,7 +1842,7 @@ CONFIG_SATA_PMP=y # # Controllers with non-SFF native interface # -CONFIG_SATA_AHCI=m +CONFIG_SATA_AHCI=y CONFIG_SATA_AHCI_PLATFORM=m CONFIG_AHCI_TEGRA=m CONFIG_AHCI_XGENE=m @@ -2585,12 +2583,12 @@ CONFIG_RTL8723_COMMON=m CONFIG_RTLBTCOEXIST=m CONFIG_WL_TI=y CONFIG_WL1251=m -CONFIG_WL1251_SPI=m +# CONFIG_WL1251_SPI is not set CONFIG_WL1251_SDIO=m CONFIG_WL12XX=m CONFIG_WL18XX=m CONFIG_WLCORE=m -CONFIG_WLCORE_SPI=m +# CONFIG_WLCORE_SPI is not set CONFIG_WLCORE_SDIO=m # CONFIG_WILINK_PLATFORM_DATA is not set CONFIG_ZD1211RW=m @@ -3136,7 +3134,7 @@ CONFIG_XILLYBUS_OF=m # # I2C support # -CONFIG_I2C=m +CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y # CONFIG_I2C_COMPAT is not set CONFIG_I2C_CHARDEV=m @@ -3356,6 +3354,7 @@ CONFIG_GPIO_MAX7300=m CONFIG_GPIO_MAX732X=m CONFIG_GPIO_PCA953X=m CONFIG_GPIO_PCF857X=m +# CONFIG_GPIO_SX150X is not set # # MFD GPIO expanders @@ -3485,7 +3484,7 @@ CONFIG_SENSORS_GL518SM=m CONFIG_SENSORS_GL520SM=m CONFIG_SENSORS_G760A=m CONFIG_SENSORS_G762=m -CONFIG_SENSORS_GPIO_FAN=m +# CONFIG_SENSORS_GPIO_FAN is not set CONFIG_SENSORS_HIH6130=m CONFIG_SENSORS_IBMAEM=m CONFIG_SENSORS_IBMPEX=m @@ -3532,7 +3531,7 @@ CONFIG_SENSORS_LM95241=m CONFIG_SENSORS_LM95245=m CONFIG_SENSORS_PC87360=m CONFIG_SENSORS_PC87427=m -CONFIG_SENSORS_NTC_THERMISTOR=m +# CONFIG_SENSORS_NTC_THERMISTOR is not set CONFIG_SENSORS_NCT6683=m CONFIG_SENSORS_NCT6775=m CONFIG_SENSORS_NCT7802=m @@ -3593,7 +3592,7 @@ CONFIG_SENSORS_W83L785TS=m CONFIG_SENSORS_W83L786NG=m CONFIG_SENSORS_W83627HF=m CONFIG_SENSORS_W83627EHF=m -CONFIG_THERMAL=m +CONFIG_THERMAL=y CONFIG_THERMAL_HWMON=y CONFIG_THERMAL_OF=y CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y @@ -3689,21 +3688,44 @@ CONFIG_BCMA_DRIVER_GPIO=y # Multifunction device drivers # CONFIG_MFD_CORE=y +# CONFIG_MFD_AS3711 is not set +# CONFIG_MFD_AS3722 is not set +# CONFIG_PMIC_ADP5520 is not set +# CONFIG_MFD_AAT2870_CORE is not set CONFIG_MFD_ATMEL_HLCDC=m # CONFIG_MFD_BCM590XX is not set +# CONFIG_MFD_AXP20X is not set CONFIG_MFD_CROS_EC=m CONFIG_MFD_CROS_EC_I2C=m # CONFIG_MFD_CROS_EC_SPI is not set +# CONFIG_PMIC_DA903X is not set # CONFIG_MFD_DA9052_SPI is not set +# CONFIG_MFD_DA9052_I2C is not set +# CONFIG_MFD_DA9055 is not set +# CONFIG_MFD_DA9063 is not set +# CONFIG_MFD_DA9150 is not set CONFIG_MFD_DLN2=m # CONFIG_MFD_MC13XXX_SPI is not set # CONFIG_MFD_MC13XXX_I2C is not set # CONFIG_MFD_HI6421_PMIC is not set CONFIG_HTC_PASIC3=m +# CONFIG_HTC_I2CPLD is not set CONFIG_LPC_ICH=m CONFIG_LPC_SCH=m +# CONFIG_INTEL_SOC_PMIC is not set # CONFIG_MFD_JANZ_CMODIO is not set CONFIG_MFD_KEMPLD=m +# CONFIG_MFD_88PM800 is not set +# CONFIG_MFD_88PM805 is not set +# CONFIG_MFD_88PM860X is not set +# CONFIG_MFD_MAX14577 is not set +# CONFIG_MFD_MAX77686 is not set +# CONFIG_MFD_MAX77693 is not set +# CONFIG_MFD_MAX77843 is not set +# CONFIG_MFD_MAX8907 is not set +# CONFIG_MFD_MAX8925 is not set +# CONFIG_MFD_MAX8997 is not set +# CONFIG_MFD_MAX8998 is not set # CONFIG_MFD_MT6397 is not set CONFIG_MFD_MENF21BMC=m # CONFIG_EZX_PCAP is not set @@ -3715,31 +3737,48 @@ CONFIG_MFD_QCOM_RPM=m CONFIG_MFD_SPMI_PMIC=m # CONFIG_MFD_RDC321X is not set CONFIG_MFD_RTSX_PCI=m +# CONFIG_MFD_RT5033 is not set CONFIG_MFD_RTSX_USB=m +# CONFIG_MFD_RC5T583 is not set # CONFIG_MFD_RK808 is not set # CONFIG_MFD_RN5T618 is not set +# CONFIG_MFD_SEC_CORE is not set # CONFIG_MFD_SI476X_CORE is not set # CONFIG_MFD_SM501 is not set CONFIG_MFD_SKY81452=m +# CONFIG_MFD_SMSC is not set # CONFIG_ABX500_CORE is not set # CONFIG_MFD_STMPE is not set CONFIG_MFD_SYSCON=y CONFIG_MFD_TI_AM335X_TSCADC=m CONFIG_MFD_LP3943=m +# CONFIG_MFD_LP8788 is not set +# CONFIG_MFD_PALMAS is not set # CONFIG_TPS6105X is not set CONFIG_TPS65010=m CONFIG_TPS6507X=m +# CONFIG_MFD_TPS65090 is not set # CONFIG_MFD_TPS65217 is not set CONFIG_MFD_TPS65218=m +# CONFIG_MFD_TPS6586X is not set +# CONFIG_MFD_TPS65910 is not set # CONFIG_MFD_TPS65912 is not set +# CONFIG_MFD_TPS65912_I2C is not set # CONFIG_MFD_TPS65912_SPI is not set +# CONFIG_MFD_TPS80031 is not set +# CONFIG_TWL4030_CORE is not set +# CONFIG_TWL6040_CORE is not set CONFIG_MFD_WL1273_CORE=m CONFIG_MFD_LM3533=m +# CONFIG_MFD_TC3589X is not set # CONFIG_MFD_TMIO is not set CONFIG_MFD_VX855=m # CONFIG_MFD_ARIZONA_I2C is not set # CONFIG_MFD_ARIZONA_SPI is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X_I2C is not set # CONFIG_MFD_WM831X_SPI is not set +# CONFIG_MFD_WM8350_I2C is not set CONFIG_MFD_WM8994=m CONFIG_MFD_VEXPRESS_SYSREG=y CONFIG_REGULATOR=y @@ -3841,7 +3880,7 @@ CONFIG_IR_IGORPLUGUSB=m CONFIG_IR_IGUANA=m CONFIG_IR_TTUSBIR=m CONFIG_RC_LOOPBACK=m -CONFIG_IR_GPIO_CIR=m +# CONFIG_IR_GPIO_CIR is not set CONFIG_MEDIA_USB_SUPPORT=y # @@ -4778,7 +4817,7 @@ CONFIG_HID=y CONFIG_HID_BATTERY_STRENGTH=y CONFIG_HIDRAW=y CONFIG_UHID=m -CONFIG_HID_GENERIC=y +CONFIG_HID_GENERIC=m # # Special HID drivers @@ -5159,7 +5198,7 @@ CONFIG_MMC_SDHCI_TEGRA=m CONFIG_MMC_SDHCI_F_SDH30=m CONFIG_MMC_SDHCI_MSM=m CONFIG_MMC_TIFM_SD=m -CONFIG_MMC_SPI=m +# CONFIG_MMC_SPI is not set CONFIG_MMC_CB710=m CONFIG_MMC_VIA_SDMMC=m CONFIG_MMC_DW=m @@ -5584,7 +5623,7 @@ CONFIG_VT6656=m # # Triggers - standalone # -CONFIG_IIO_PERIODIC_RTC_TRIGGER=m +# CONFIG_IIO_PERIODIC_RTC_TRIGGER is not set # CONFIG_IIO_SIMPLE_DUMMY is not set CONFIG_FB_SM7XX=m CONFIG_FB_SM750=m @@ -5826,8 +5865,7 @@ CONFIG_HID_SENSOR_IIO_TRIGGER=m # # SSP Sensor Common # -# CONFIG_IIO_SSP_SENSORS_COMMONS is not set -CONFIG_IIO_SSP_SENSORHUB=m +# CONFIG_IIO_SSP_SENSORHUB is not set # # Digital to analog converters @@ -5907,7 +5945,7 @@ CONFIG_CM3323=m CONFIG_HID_SENSOR_ALS=m CONFIG_HID_SENSOR_PROX=m CONFIG_JSA1212=m -CONFIG_SENSORS_LM3533=m +# CONFIG_SENSORS_LM3533 is not set # CONFIG_LTR501 is not set # CONFIG_TCS3414 is not set # CONFIG_TCS3472 is not set @@ -5933,7 +5971,7 @@ CONFIG_HID_SENSOR_DEVICE_ROTATION=m # # Triggers - standalone # -CONFIG_IIO_INTERRUPT_TRIGGER=m +# CONFIG_IIO_INTERRUPT_TRIGGER is not set # CONFIG_IIO_SYSFS_TRIGGER is not set # @@ -6558,7 +6596,7 @@ CONFIG_KEYS=y CONFIG_PERSISTENT_KEYRINGS=y CONFIG_BIG_KEYS=y CONFIG_TRUSTED_KEYS=m -CONFIG_ENCRYPTED_KEYS=m +CONFIG_ENCRYPTED_KEYS=y # CONFIG_SECURITY_DMESG_RESTRICT is not set CONFIG_SECURITY=y CONFIG_SECURITYFS=y @@ -6611,11 +6649,11 @@ CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_ALGAPI2=y CONFIG_CRYPTO_AEAD=m CONFIG_CRYPTO_AEAD2=y -CONFIG_CRYPTO_BLKCIPHER=m +CONFIG_CRYPTO_BLKCIPHER=y CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_HASH2=y -CONFIG_CRYPTO_RNG=m +CONFIG_CRYPTO_RNG=y CONFIG_CRYPTO_RNG2=y CONFIG_CRYPTO_PCOMP=m CONFIG_CRYPTO_PCOMP2=y @@ -6623,7 +6661,7 @@ CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_MANAGER2=y CONFIG_CRYPTO_USER=m CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y -CONFIG_CRYPTO_GF128MUL=m +CONFIG_CRYPTO_GF128MUL=y CONFIG_CRYPTO_NULL=m CONFIG_CRYPTO_PCRYPT=m CONFIG_CRYPTO_WORKQUEUE=y @@ -6643,13 +6681,13 @@ CONFIG_CRYPTO_SEQIV=m # # Block modes # -CONFIG_CRYPTO_CBC=m +CONFIG_CRYPTO_CBC=y CONFIG_CRYPTO_CTR=m -CONFIG_CRYPTO_CTS=m -CONFIG_CRYPTO_ECB=m +CONFIG_CRYPTO_CTS=y +CONFIG_CRYPTO_ECB=y CONFIG_CRYPTO_LRW=m CONFIG_CRYPTO_PCBC=m -CONFIG_CRYPTO_XTS=m +CONFIG_CRYPTO_XTS=y # # Hash modes @@ -6674,7 +6712,7 @@ CONFIG_CRYPTO_RMD160=m CONFIG_CRYPTO_RMD256=m CONFIG_CRYPTO_RMD320=m CONFIG_CRYPTO_SHA1=y -CONFIG_CRYPTO_SHA256=m +CONFIG_CRYPTO_SHA256=y CONFIG_CRYPTO_SHA512=m CONFIG_CRYPTO_TGR192=m CONFIG_CRYPTO_WP512=m diff --git a/config/arm64/vanilla b/config/arm64/vanilla index 19579e2..78c2e6f 100644 --- a/config/arm64/vanilla +++ b/config/arm64/vanilla @@ -517,7 +517,7 @@ CONFIG_ARM_CPUIDLE=y # CONFIG_CPU_FREQ=y CONFIG_CPU_FREQ_GOV_COMMON=y -CONFIG_CPU_FREQ_STAT=y +CONFIG_CPU_FREQ_STAT=m CONFIG_CPU_FREQ_STAT_DETAILS=y # CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set # CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set @@ -868,7 +868,7 @@ CONFIG_NFT_REJECT_IPV4=m CONFIG_NF_TABLES_ARP=m CONFIG_NF_LOG_ARP=m CONFIG_NF_LOG_IPV4=m -CONFIG_NF_REJECT_IPV4=m +CONFIG_NF_REJECT_IPV4=y CONFIG_NF_NAT_IPV4=m CONFIG_NFT_CHAIN_NAT_IPV4=m CONFIG_NF_NAT_MASQUERADE_IPV4=m @@ -908,7 +908,7 @@ CONFIG_NF_CONNTRACK_IPV6=m CONFIG_NF_TABLES_IPV6=m CONFIG_NFT_CHAIN_ROUTE_IPV6=m CONFIG_NFT_REJECT_IPV6=m -CONFIG_NF_REJECT_IPV6=m +CONFIG_NF_REJECT_IPV6=y CONFIG_NF_LOG_IPV6=m CONFIG_NF_NAT_IPV6=m CONFIG_NFT_CHAIN_NAT_IPV6=m @@ -1184,19 +1184,17 @@ CONFIG_CAN_LEDS=y CONFIG_CAN_XILINXCAN=m CONFIG_CAN_SJA1000=m # CONFIG_CAN_SJA1000_ISA is not set -CONFIG_CAN_SJA1000_PLATFORM=m +# CONFIG_CAN_SJA1000_PLATFORM is not set CONFIG_CAN_EMS_PCI=m CONFIG_CAN_PEAK_PCI=m CONFIG_CAN_PEAK_PCIEC=y CONFIG_CAN_KVASER_PCI=m CONFIG_CAN_PLX_PCI=m CONFIG_CAN_C_CAN=m -CONFIG_CAN_C_CAN_PLATFORM=m +# CONFIG_CAN_C_CAN_PLATFORM is not set CONFIG_CAN_C_CAN_PCI=m CONFIG_CAN_M_CAN=m -CONFIG_CAN_CC770=m -# CONFIG_CAN_CC770_ISA is not set -CONFIG_CAN_CC770_PLATFORM=m +# CONFIG_CAN_CC770 is not set # # CAN SPI interfaces @@ -1832,7 +1830,7 @@ CONFIG_SCSI_OSD_ULD=m CONFIG_SCSI_OSD_DPRINT_SENSE=1 # CONFIG_SCSI_OSD_DEBUG is not set CONFIG_HAVE_PATA_PLATFORM=y -CONFIG_ATA=m +CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set CONFIG_ATA_VERBOSE_ERROR=y CONFIG_SATA_PMP=y @@ -1840,7 +1838,7 @@ CONFIG_SATA_PMP=y # # Controllers with non-SFF native interface # -CONFIG_SATA_AHCI=m +CONFIG_SATA_AHCI=y CONFIG_SATA_AHCI_PLATFORM=m CONFIG_AHCI_TEGRA=m CONFIG_AHCI_XGENE=m @@ -2581,12 +2579,12 @@ CONFIG_RTL8723_COMMON=m CONFIG_RTLBTCOEXIST=m CONFIG_WL_TI=y CONFIG_WL1251=m -CONFIG_WL1251_SPI=m +# CONFIG_WL1251_SPI is not set CONFIG_WL1251_SDIO=m CONFIG_WL12XX=m CONFIG_WL18XX=m CONFIG_WLCORE=m -CONFIG_WLCORE_SPI=m +# CONFIG_WLCORE_SPI is not set CONFIG_WLCORE_SDIO=m # CONFIG_WILINK_PLATFORM_DATA is not set CONFIG_ZD1211RW=m @@ -3131,7 +3129,7 @@ CONFIG_XILLYBUS_OF=m # # I2C support # -CONFIG_I2C=m +CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y # CONFIG_I2C_COMPAT is not set CONFIG_I2C_CHARDEV=m @@ -3351,6 +3349,7 @@ CONFIG_GPIO_MAX7300=m CONFIG_GPIO_MAX732X=m CONFIG_GPIO_PCA953X=m CONFIG_GPIO_PCF857X=m +# CONFIG_GPIO_SX150X is not set # # MFD GPIO expanders @@ -3480,7 +3479,7 @@ CONFIG_SENSORS_GL518SM=m CONFIG_SENSORS_GL520SM=m CONFIG_SENSORS_G760A=m CONFIG_SENSORS_G762=m -CONFIG_SENSORS_GPIO_FAN=m +# CONFIG_SENSORS_GPIO_FAN is not set CONFIG_SENSORS_HIH6130=m CONFIG_SENSORS_IBMAEM=m CONFIG_SENSORS_IBMPEX=m @@ -3527,7 +3526,7 @@ CONFIG_SENSORS_LM95241=m CONFIG_SENSORS_LM95245=m CONFIG_SENSORS_PC87360=m CONFIG_SENSORS_PC87427=m -CONFIG_SENSORS_NTC_THERMISTOR=m +# CONFIG_SENSORS_NTC_THERMISTOR is not set CONFIG_SENSORS_NCT6683=m CONFIG_SENSORS_NCT6775=m CONFIG_SENSORS_NCT7802=m @@ -3588,7 +3587,7 @@ CONFIG_SENSORS_W83L785TS=m CONFIG_SENSORS_W83L786NG=m CONFIG_SENSORS_W83627HF=m CONFIG_SENSORS_W83627EHF=m -CONFIG_THERMAL=m +CONFIG_THERMAL=y CONFIG_THERMAL_HWMON=y CONFIG_THERMAL_OF=y CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y @@ -3684,21 +3683,44 @@ CONFIG_BCMA_DRIVER_GPIO=y # Multifunction device drivers # CONFIG_MFD_CORE=y +# CONFIG_MFD_AS3711 is not set +# CONFIG_MFD_AS3722 is not set +# CONFIG_PMIC_ADP5520 is not set +# CONFIG_MFD_AAT2870_CORE is not set CONFIG_MFD_ATMEL_HLCDC=m # CONFIG_MFD_BCM590XX is not set +# CONFIG_MFD_AXP20X is not set CONFIG_MFD_CROS_EC=m CONFIG_MFD_CROS_EC_I2C=m # CONFIG_MFD_CROS_EC_SPI is not set +# CONFIG_PMIC_DA903X is not set # CONFIG_MFD_DA9052_SPI is not set +# CONFIG_MFD_DA9052_I2C is not set +# CONFIG_MFD_DA9055 is not set +# CONFIG_MFD_DA9063 is not set +# CONFIG_MFD_DA9150 is not set CONFIG_MFD_DLN2=m # CONFIG_MFD_MC13XXX_SPI is not set # CONFIG_MFD_MC13XXX_I2C is not set # CONFIG_MFD_HI6421_PMIC is not set CONFIG_HTC_PASIC3=m +# CONFIG_HTC_I2CPLD is not set CONFIG_LPC_ICH=m CONFIG_LPC_SCH=m +# CONFIG_INTEL_SOC_PMIC is not set # CONFIG_MFD_JANZ_CMODIO is not set CONFIG_MFD_KEMPLD=m +# CONFIG_MFD_88PM800 is not set +# CONFIG_MFD_88PM805 is not set +# CONFIG_MFD_88PM860X is not set +# CONFIG_MFD_MAX14577 is not set +# CONFIG_MFD_MAX77686 is not set +# CONFIG_MFD_MAX77693 is not set +# CONFIG_MFD_MAX77843 is not set +# CONFIG_MFD_MAX8907 is not set +# CONFIG_MFD_MAX8925 is not set +# CONFIG_MFD_MAX8997 is not set +# CONFIG_MFD_MAX8998 is not set # CONFIG_MFD_MT6397 is not set CONFIG_MFD_MENF21BMC=m # CONFIG_EZX_PCAP is not set @@ -3710,31 +3732,48 @@ CONFIG_MFD_QCOM_RPM=m CONFIG_MFD_SPMI_PMIC=m # CONFIG_MFD_RDC321X is not set CONFIG_MFD_RTSX_PCI=m +# CONFIG_MFD_RT5033 is not set CONFIG_MFD_RTSX_USB=m +# CONFIG_MFD_RC5T583 is not set # CONFIG_MFD_RK808 is not set # CONFIG_MFD_RN5T618 is not set +# CONFIG_MFD_SEC_CORE is not set # CONFIG_MFD_SI476X_CORE is not set # CONFIG_MFD_SM501 is not set CONFIG_MFD_SKY81452=m +# CONFIG_MFD_SMSC is not set # CONFIG_ABX500_CORE is not set # CONFIG_MFD_STMPE is not set CONFIG_MFD_SYSCON=y CONFIG_MFD_TI_AM335X_TSCADC=m CONFIG_MFD_LP3943=m +# CONFIG_MFD_LP8788 is not set +# CONFIG_MFD_PALMAS is not set # CONFIG_TPS6105X is not set CONFIG_TPS65010=m CONFIG_TPS6507X=m +# CONFIG_MFD_TPS65090 is not set # CONFIG_MFD_TPS65217 is not set CONFIG_MFD_TPS65218=m +# CONFIG_MFD_TPS6586X is not set +# CONFIG_MFD_TPS65910 is not set # CONFIG_MFD_TPS65912 is not set +# CONFIG_MFD_TPS65912_I2C is not set # CONFIG_MFD_TPS65912_SPI is not set +# CONFIG_MFD_TPS80031 is not set +# CONFIG_TWL4030_CORE is not set +# CONFIG_TWL6040_CORE is not set CONFIG_MFD_WL1273_CORE=m CONFIG_MFD_LM3533=m +# CONFIG_MFD_TC3589X is not set # CONFIG_MFD_TMIO is not set CONFIG_MFD_VX855=m # CONFIG_MFD_ARIZONA_I2C is not set # CONFIG_MFD_ARIZONA_SPI is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X_I2C is not set # CONFIG_MFD_WM831X_SPI is not set +# CONFIG_MFD_WM8350_I2C is not set CONFIG_MFD_WM8994=m CONFIG_MFD_VEXPRESS_SYSREG=y CONFIG_REGULATOR=y @@ -3836,7 +3875,7 @@ CONFIG_IR_IGORPLUGUSB=m CONFIG_IR_IGUANA=m CONFIG_IR_TTUSBIR=m CONFIG_RC_LOOPBACK=m -CONFIG_IR_GPIO_CIR=m +# CONFIG_IR_GPIO_CIR is not set CONFIG_MEDIA_USB_SUPPORT=y # @@ -4773,7 +4812,7 @@ CONFIG_HID=y CONFIG_HID_BATTERY_STRENGTH=y CONFIG_HIDRAW=y CONFIG_UHID=m -CONFIG_HID_GENERIC=y +CONFIG_HID_GENERIC=m # # Special HID drivers @@ -5153,7 +5192,7 @@ CONFIG_MMC_SDHCI_TEGRA=m CONFIG_MMC_SDHCI_F_SDH30=m CONFIG_MMC_SDHCI_MSM=m CONFIG_MMC_TIFM_SD=m -CONFIG_MMC_SPI=m +# CONFIG_MMC_SPI is not set CONFIG_MMC_CB710=m CONFIG_MMC_VIA_SDMMC=m CONFIG_MMC_DW=m @@ -5578,7 +5617,7 @@ CONFIG_VT6656=m # # Triggers - standalone # -CONFIG_IIO_PERIODIC_RTC_TRIGGER=m +# CONFIG_IIO_PERIODIC_RTC_TRIGGER is not set # CONFIG_IIO_SIMPLE_DUMMY is not set CONFIG_FB_SM7XX=m CONFIG_FB_SM750=m @@ -5820,8 +5859,7 @@ CONFIG_HID_SENSOR_IIO_TRIGGER=m # # SSP Sensor Common # -# CONFIG_IIO_SSP_SENSORS_COMMONS is not set -CONFIG_IIO_SSP_SENSORHUB=m +# CONFIG_IIO_SSP_SENSORHUB is not set # # Digital to analog converters @@ -5901,7 +5939,7 @@ CONFIG_CM3323=m CONFIG_HID_SENSOR_ALS=m CONFIG_HID_SENSOR_PROX=m CONFIG_JSA1212=m -CONFIG_SENSORS_LM3533=m +# CONFIG_SENSORS_LM3533 is not set # CONFIG_LTR501 is not set # CONFIG_TCS3414 is not set # CONFIG_TCS3472 is not set @@ -5927,7 +5965,7 @@ CONFIG_HID_SENSOR_DEVICE_ROTATION=m # # Triggers - standalone # -CONFIG_IIO_INTERRUPT_TRIGGER=m +# CONFIG_IIO_INTERRUPT_TRIGGER is not set # CONFIG_IIO_SYSFS_TRIGGER is not set # @@ -6551,7 +6589,7 @@ CONFIG_KEYS=y CONFIG_PERSISTENT_KEYRINGS=y CONFIG_BIG_KEYS=y CONFIG_TRUSTED_KEYS=m -CONFIG_ENCRYPTED_KEYS=m +CONFIG_ENCRYPTED_KEYS=y # CONFIG_SECURITY_DMESG_RESTRICT is not set CONFIG_SECURITY=y CONFIG_SECURITYFS=y @@ -6604,11 +6642,11 @@ CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_ALGAPI2=y CONFIG_CRYPTO_AEAD=m CONFIG_CRYPTO_AEAD2=y -CONFIG_CRYPTO_BLKCIPHER=m +CONFIG_CRYPTO_BLKCIPHER=y CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_HASH2=y -CONFIG_CRYPTO_RNG=m +CONFIG_CRYPTO_RNG=y CONFIG_CRYPTO_RNG2=y CONFIG_CRYPTO_PCOMP=m CONFIG_CRYPTO_PCOMP2=y @@ -6616,7 +6654,7 @@ CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_MANAGER2=y CONFIG_CRYPTO_USER=m CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y -CONFIG_CRYPTO_GF128MUL=m +CONFIG_CRYPTO_GF128MUL=y CONFIG_CRYPTO_NULL=m CONFIG_CRYPTO_PCRYPT=m CONFIG_CRYPTO_WORKQUEUE=y @@ -6636,13 +6674,13 @@ CONFIG_CRYPTO_SEQIV=m # # Block modes # -CONFIG_CRYPTO_CBC=m +CONFIG_CRYPTO_CBC=y CONFIG_CRYPTO_CTR=m -CONFIG_CRYPTO_CTS=m -CONFIG_CRYPTO_ECB=m +CONFIG_CRYPTO_CTS=y +CONFIG_CRYPTO_ECB=y CONFIG_CRYPTO_LRW=m CONFIG_CRYPTO_PCBC=m -CONFIG_CRYPTO_XTS=m +CONFIG_CRYPTO_XTS=y # # Hash modes @@ -6667,7 +6705,7 @@ CONFIG_CRYPTO_RMD160=m CONFIG_CRYPTO_RMD256=m CONFIG_CRYPTO_RMD320=m CONFIG_CRYPTO_SHA1=y -CONFIG_CRYPTO_SHA256=m +CONFIG_CRYPTO_SHA256=y CONFIG_CRYPTO_SHA512=m CONFIG_CRYPTO_TGR192=m CONFIG_CRYPTO_WP512=m diff --git a/config/armv7hl/default b/config/armv7hl/default index 5d756a1..1c3d35b 100644 --- a/config/armv7hl/default +++ b/config/armv7hl/default @@ -1305,7 +1305,7 @@ CONFIG_NFT_REJECT_IPV4=m CONFIG_NF_TABLES_ARP=m CONFIG_NF_LOG_ARP=m CONFIG_NF_LOG_IPV4=m -CONFIG_NF_REJECT_IPV4=m +CONFIG_NF_REJECT_IPV4=y CONFIG_NF_NAT_IPV4=m CONFIG_NFT_CHAIN_NAT_IPV4=m CONFIG_NF_NAT_MASQUERADE_IPV4=m @@ -1345,7 +1345,7 @@ CONFIG_NF_CONNTRACK_IPV6=m CONFIG_NF_TABLES_IPV6=m CONFIG_NFT_CHAIN_ROUTE_IPV6=m CONFIG_NFT_REJECT_IPV6=m -CONFIG_NF_REJECT_IPV6=m +CONFIG_NF_REJECT_IPV6=y CONFIG_NF_LOG_IPV6=m CONFIG_NF_NAT_IPV6=m CONFIG_NFT_CHAIN_NAT_IPV6=m @@ -2944,12 +2944,12 @@ CONFIG_RTLWIFI_DEBUG=y CONFIG_RTL8192C_COMMON=m CONFIG_WL_TI=y CONFIG_WL1251=m -CONFIG_WL1251_SPI=m +# CONFIG_WL1251_SPI is not set CONFIG_WL1251_SDIO=m CONFIG_WL12XX=m CONFIG_WL18XX=m CONFIG_WLCORE=m -CONFIG_WLCORE_SPI=m +# CONFIG_WLCORE_SPI is not set CONFIG_WLCORE_SDIO=m CONFIG_WILINK_PLATFORM_DATA=y CONFIG_ZD1211RW=m @@ -4054,7 +4054,7 @@ CONFIG_SENSORS_GL518SM=m CONFIG_SENSORS_GL520SM=m CONFIG_SENSORS_G760A=m CONFIG_SENSORS_G762=m -CONFIG_SENSORS_GPIO_FAN=m +# CONFIG_SENSORS_GPIO_FAN is not set CONFIG_SENSORS_HIH6130=m CONFIG_SENSORS_IBMAEM=m CONFIG_SENSORS_IBMPEX=m @@ -4101,7 +4101,7 @@ CONFIG_SENSORS_LM95241=m CONFIG_SENSORS_LM95245=m CONFIG_SENSORS_PC87360=m CONFIG_SENSORS_PC87427=m -CONFIG_SENSORS_NTC_THERMISTOR=m +# CONFIG_SENSORS_NTC_THERMISTOR is not set CONFIG_SENSORS_NCT6683=m # CONFIG_SENSORS_NCT6775 is not set # CONFIG_SENSORS_NCT7802 is not set @@ -5716,7 +5716,7 @@ CONFIG_HID=y CONFIG_HID_BATTERY_STRENGTH=y CONFIG_HIDRAW=y CONFIG_UHID=m -CONFIG_HID_GENERIC=y +CONFIG_HID_GENERIC=m # # Special HID drivers @@ -6649,7 +6649,7 @@ CONFIG_ADE7854_SPI=m # # Triggers - standalone # -CONFIG_IIO_PERIODIC_RTC_TRIGGER=m +# CONFIG_IIO_PERIODIC_RTC_TRIGGER is not set # CONFIG_IIO_SIMPLE_DUMMY is not set # CONFIG_FB_SM7XX is not set # CONFIG_FB_SM750 is not set @@ -7088,7 +7088,7 @@ CONFIG_HID_SENSOR_DEVICE_ROTATION=m # # Triggers - standalone # -CONFIG_IIO_INTERRUPT_TRIGGER=m +# CONFIG_IIO_INTERRUPT_TRIGGER is not set # CONFIG_IIO_SYSFS_TRIGGER is not set # diff --git a/config/armv7hl/lpae b/config/armv7hl/lpae index e1a2372..ef4abb6 100644 --- a/config/armv7hl/lpae +++ b/config/armv7hl/lpae @@ -1214,7 +1214,7 @@ CONFIG_NFT_REJECT_IPV4=m CONFIG_NF_TABLES_ARP=m CONFIG_NF_LOG_ARP=m CONFIG_NF_LOG_IPV4=m -CONFIG_NF_REJECT_IPV4=m +CONFIG_NF_REJECT_IPV4=y CONFIG_NF_NAT_IPV4=m CONFIG_NFT_CHAIN_NAT_IPV4=m CONFIG_NF_NAT_MASQUERADE_IPV4=m @@ -1254,7 +1254,7 @@ CONFIG_NF_CONNTRACK_IPV6=m CONFIG_NF_TABLES_IPV6=m CONFIG_NFT_CHAIN_ROUTE_IPV6=m CONFIG_NFT_REJECT_IPV6=m -CONFIG_NF_REJECT_IPV6=m +CONFIG_NF_REJECT_IPV6=y CONFIG_NF_LOG_IPV6=m CONFIG_NF_NAT_IPV6=m CONFIG_NFT_CHAIN_NAT_IPV6=m @@ -2830,12 +2830,12 @@ CONFIG_RTLWIFI_DEBUG=y CONFIG_RTL8192C_COMMON=m CONFIG_WL_TI=y CONFIG_WL1251=m -CONFIG_WL1251_SPI=m +# CONFIG_WL1251_SPI is not set CONFIG_WL1251_SDIO=m CONFIG_WL12XX=m CONFIG_WL18XX=m CONFIG_WLCORE=m -CONFIG_WLCORE_SPI=m +# CONFIG_WLCORE_SPI is not set CONFIG_WLCORE_SDIO=m CONFIG_WILINK_PLATFORM_DATA=y CONFIG_ZD1211RW=m @@ -3857,7 +3857,7 @@ CONFIG_SENSORS_GL518SM=m CONFIG_SENSORS_GL520SM=m CONFIG_SENSORS_G760A=m CONFIG_SENSORS_G762=m -CONFIG_SENSORS_GPIO_FAN=m +# CONFIG_SENSORS_GPIO_FAN is not set CONFIG_SENSORS_HIH6130=m CONFIG_SENSORS_IBMAEM=m CONFIG_SENSORS_IBMPEX=m @@ -3904,7 +3904,7 @@ CONFIG_SENSORS_LM95241=m CONFIG_SENSORS_LM95245=m CONFIG_SENSORS_PC87360=m CONFIG_SENSORS_PC87427=m -CONFIG_SENSORS_NTC_THERMISTOR=m +# CONFIG_SENSORS_NTC_THERMISTOR is not set CONFIG_SENSORS_NCT6683=m # CONFIG_SENSORS_NCT6775 is not set # CONFIG_SENSORS_NCT7802 is not set @@ -5420,7 +5420,7 @@ CONFIG_HID=y CONFIG_HID_BATTERY_STRENGTH=y CONFIG_HIDRAW=y CONFIG_UHID=m -CONFIG_HID_GENERIC=y +CONFIG_HID_GENERIC=m # # Special HID drivers @@ -6314,7 +6314,7 @@ CONFIG_ADE7854_SPI=m # # Triggers - standalone # -CONFIG_IIO_PERIODIC_RTC_TRIGGER=m +# CONFIG_IIO_PERIODIC_RTC_TRIGGER is not set # CONFIG_IIO_SIMPLE_DUMMY is not set # CONFIG_FB_SM7XX is not set # CONFIG_FB_SM750 is not set @@ -6727,7 +6727,7 @@ CONFIG_HID_SENSOR_DEVICE_ROTATION=m # # Triggers - standalone # -CONFIG_IIO_INTERRUPT_TRIGGER=m +# CONFIG_IIO_INTERRUPT_TRIGGER is not set # CONFIG_IIO_SYSFS_TRIGGER is not set # diff --git a/config/armv7hl/vanilla b/config/armv7hl/vanilla index fa7d41d..cb9d24d 100644 --- a/config/armv7hl/vanilla +++ b/config/armv7hl/vanilla @@ -1302,7 +1302,7 @@ CONFIG_NFT_REJECT_IPV4=m CONFIG_NF_TABLES_ARP=m CONFIG_NF_LOG_ARP=m CONFIG_NF_LOG_IPV4=m -CONFIG_NF_REJECT_IPV4=m +CONFIG_NF_REJECT_IPV4=y CONFIG_NF_NAT_IPV4=m CONFIG_NFT_CHAIN_NAT_IPV4=m CONFIG_NF_NAT_MASQUERADE_IPV4=m @@ -1342,7 +1342,7 @@ CONFIG_NF_CONNTRACK_IPV6=m CONFIG_NF_TABLES_IPV6=m CONFIG_NFT_CHAIN_ROUTE_IPV6=m CONFIG_NFT_REJECT_IPV6=m -CONFIG_NF_REJECT_IPV6=m +CONFIG_NF_REJECT_IPV6=y CONFIG_NF_LOG_IPV6=m CONFIG_NF_NAT_IPV6=m CONFIG_NFT_CHAIN_NAT_IPV6=m @@ -2941,12 +2941,12 @@ CONFIG_RTLWIFI_DEBUG=y CONFIG_RTL8192C_COMMON=m CONFIG_WL_TI=y CONFIG_WL1251=m -CONFIG_WL1251_SPI=m +# CONFIG_WL1251_SPI is not set CONFIG_WL1251_SDIO=m CONFIG_WL12XX=m CONFIG_WL18XX=m CONFIG_WLCORE=m -CONFIG_WLCORE_SPI=m +# CONFIG_WLCORE_SPI is not set CONFIG_WLCORE_SDIO=m CONFIG_WILINK_PLATFORM_DATA=y CONFIG_ZD1211RW=m @@ -4050,7 +4050,7 @@ CONFIG_SENSORS_GL518SM=m CONFIG_SENSORS_GL520SM=m CONFIG_SENSORS_G760A=m CONFIG_SENSORS_G762=m -CONFIG_SENSORS_GPIO_FAN=m +# CONFIG_SENSORS_GPIO_FAN is not set CONFIG_SENSORS_HIH6130=m CONFIG_SENSORS_IBMAEM=m CONFIG_SENSORS_IBMPEX=m @@ -4097,7 +4097,7 @@ CONFIG_SENSORS_LM95241=m CONFIG_SENSORS_LM95245=m CONFIG_SENSORS_PC87360=m CONFIG_SENSORS_PC87427=m -CONFIG_SENSORS_NTC_THERMISTOR=m +# CONFIG_SENSORS_NTC_THERMISTOR is not set CONFIG_SENSORS_NCT6683=m # CONFIG_SENSORS_NCT6775 is not set # CONFIG_SENSORS_NCT7802 is not set @@ -5712,7 +5712,7 @@ CONFIG_HID=y CONFIG_HID_BATTERY_STRENGTH=y CONFIG_HIDRAW=y CONFIG_UHID=m -CONFIG_HID_GENERIC=y +CONFIG_HID_GENERIC=m # # Special HID drivers @@ -6644,7 +6644,7 @@ CONFIG_ADE7854_SPI=m # # Triggers - standalone # -CONFIG_IIO_PERIODIC_RTC_TRIGGER=m +# CONFIG_IIO_PERIODIC_RTC_TRIGGER is not set # CONFIG_IIO_SIMPLE_DUMMY is not set # CONFIG_FB_SM7XX is not set # CONFIG_FB_SM750 is not set @@ -7083,7 +7083,7 @@ CONFIG_HID_SENSOR_DEVICE_ROTATION=m # # Triggers - standalone # -CONFIG_IIO_INTERRUPT_TRIGGER=m +# CONFIG_IIO_INTERRUPT_TRIGGER is not set # CONFIG_IIO_SYSFS_TRIGGER is not set # -- 2.3.7 -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-kernel+owner(a)opensuse.org

2 1

[opensuse-kernel] [PATCH] config: armv7hl: Disable CONFIG_FW_LOADER_USER_HELPER_FALLBACK
by Dirk Müller 06 Jun '15

06 Jun '15

Only needed by DRM_STI, which we don't need, so disable it alltogether (it isn't configured in userspace anyway and deprecated) --- config/armv7hl/default | 6 ++---- config/armv7hl/lpae | 3 +-- config/armv7hl/vanilla | 6 ++---- 3 files changed, 5 insertions(+), 10 deletions(-) diff --git a/config/armv7hl/default b/config/armv7hl/default index 812c27a..37ac367 100644 --- a/config/armv7hl/default +++ b/config/armv7hl/default @@ -1820,8 +1820,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y # CONFIG_FIRMWARE_IN_KERNEL is not set CONFIG_EXTRA_FIRMWARE="" -CONFIG_FW_LOADER_USER_HELPER=y -CONFIG_FW_LOADER_USER_HELPER_FALLBACK=y +# CONFIG_FW_LOADER_USER_HELPER_FALLBACK is not set CONFIG_WANT_DEV_COREDUMP=y CONFIG_ALLOW_DEV_COREDUMP=y CONFIG_DEV_COREDUMP=y @@ -5176,8 +5175,7 @@ CONFIG_DRM_PANEL_SIMPLE=y CONFIG_DRM_PANEL_LD9040=y CONFIG_DRM_PANEL_S6E8AA0=y CONFIG_DRM_PANEL_SHARP_LQ101R1SX01=m -CONFIG_DRM_STI=y -CONFIG_DRM_STI_FBDEV=y +# CONFIG_DRM_STI is not set CONFIG_DRM_IMX=m CONFIG_DRM_IMX_FB_HELPER=m CONFIG_DRM_IMX_PARALLEL_DISPLAY=m diff --git a/config/armv7hl/lpae b/config/armv7hl/lpae index c9634bb..c3324dc 100644 --- a/config/armv7hl/lpae +++ b/config/armv7hl/lpae @@ -1727,8 +1727,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y # CONFIG_FIRMWARE_IN_KERNEL is not set CONFIG_EXTRA_FIRMWARE="" -CONFIG_FW_LOADER_USER_HELPER=y -CONFIG_FW_LOADER_USER_HELPER_FALLBACK=y +# CONFIG_FW_LOADER_USER_HELPER_FALLBACK is not set CONFIG_WANT_DEV_COREDUMP=y CONFIG_ALLOW_DEV_COREDUMP=y CONFIG_DEV_COREDUMP=y diff --git a/config/armv7hl/vanilla b/config/armv7hl/vanilla index f016370..cd781e5 100644 --- a/config/armv7hl/vanilla +++ b/config/armv7hl/vanilla @@ -1817,8 +1817,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y # CONFIG_FIRMWARE_IN_KERNEL is not set CONFIG_EXTRA_FIRMWARE="" -CONFIG_FW_LOADER_USER_HELPER=y -CONFIG_FW_LOADER_USER_HELPER_FALLBACK=y +# CONFIG_FW_LOADER_USER_HELPER_FALLBACK is not set CONFIG_WANT_DEV_COREDUMP=y CONFIG_ALLOW_DEV_COREDUMP=y CONFIG_DEV_COREDUMP=y @@ -5172,8 +5171,7 @@ CONFIG_DRM_PANEL_SIMPLE=y CONFIG_DRM_PANEL_LD9040=y CONFIG_DRM_PANEL_S6E8AA0=y CONFIG_DRM_PANEL_SHARP_LQ101R1SX01=m -CONFIG_DRM_STI=y -CONFIG_DRM_STI_FBDEV=y +# CONFIG_DRM_STI is not set CONFIG_DRM_IMX=m CONFIG_DRM_IMX_FB_HELPER=m CONFIG_DRM_IMX_PARALLEL_DISPLAY=m -- 2.3.7 -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-kernel+owner(a)opensuse.org

1 0