January 2014 - openSUSE Kernel - openSUSE Mailing Lists

[opensuse-kernel] [PATCH 0/9] openSUSE 13.1 armv7 misc fixes for BeagleBone
by matwey.kornilov＠gmail.com 10 Jan '14

10 Jan '14

From: Matwey V. Kornilov <matwey.kornilov(a)gmail.com> Date: Fri, 10 Jan 2014 19:48:47 +0400 Subject: [PATCH 0/9] openSUSE 13.1 armv7 misc fixes for BeagleBone Hi, The following patch series are based on backported commits: PATCH 1,2: Fix net ti cpsw (module crashes on loading) PATCH 3: Fix edma unused list (NULL pointer dereference) PATCH 4-9: Emulate unlimited SG in edma to fix failures in dma-dependent modules With this patches (all of them are backports from 3.12 and 3.13) we are able to boot openSUSE 13.1 on BeagleBone Black platform. [1] has kernel-default built with the patches and bootable JeOS image with the kernel-default. No other planform seems to be affected by this patches. Refrences: 1. https://build.opensuse.org/project/show/home:matwey:beaglebone 2. http://lists.opensuse.org/opensuse-arm/2014-01/msg00001.html 3. http://paste.opensuse.org/76652072 (kernel log without the patches) -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-kernel+owner(a)opensuse.org

1 0

[opensuse-kernel] Kernel for ppc64le(not yet) and for OBS VM's
by Adrian Schröter 09 Jan '14

09 Jan '14

Hi, I have two commits in my git repo which I would like to get merged: https://github.com/adrianschroeter/kernel-source.git 1) A config for ppc64le. The kernel will still not compile due to code problems, but I like to get it merged anyway to show where we are with our ppc64le port. The standard kernel script tools did not work for me, but the kernel build in openSUSE:Factory:PowerLE project does accept at least the config. 2) A new spec file to repackage the kernel in a way that it will get picked up by OBS VM builders. We need this for a number of reasons: * ppc64 little endian switch on big endian hosts * build jobs which require further kernel modules will be able to load them now, since te code stream does match the running kernel (eg. kiwi using LVM tools) * QA checks depending on the kernel * validation of our kernels in general, the entire distro will use the the distro kernel during building. The reason why I want to have this spec file as part of the kernel package is that it should be also branched, when someone is branching any kernel-* package. OBS does create branches for all local linked packages, so the new and modified kernel will be used also directly in this project branching the kernel. To be discussed: shall we create the initrd in a way avoiding root permissions? On the other hand, we do test our default mkinitrd tool this way. It broke often enough in the past ... -- Adrian Schroeter email: adrian(a)suse.de SUSE LINUX GmbH, GF: Jeff Hawn, Jennifer Guild, Felix Imendörffer, HRB 21284 (AG Nürnberg) Maxfeldstraße 5 90409 Nürnberg Germany -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-kernel+owner(a)opensuse.org

3 19

[opensuse-kernel] [GIT-PULL REQUEST] openSUSE 13.1 armv7 misc fixes for BeagleBone
by Matwey V. Kornilov 09 Jan '14

09 Jan '14

Hi, Please pull from https://github.com/matwey/kernel-source.git -b openSUSE-13.1 to get these changes: 1. Fix net ti cpsw (module crashes on loading) 2. Fix edma unused list (NULL pointer dereference) 3. Emulate unlimited SG in edma to fix failures in dma-dependent modules ( [ 29.758677] edma-dma-engine edma-dma-engine.0: Exceeded max SG segments 24 > 16 [ 29.768931] omap_hsmmc 48060000.mmc: prep_slave_sg() failed [ 29.774846] omap_hsmmc 48060000.mmc: MMC start dma failure [ 29.780932] mmcblk0: unknown error -1 sending read/write command, card status 0x900 ) With this patches (all of them are backports from 3.12 and 3.13) we are able to boot openSUSE 13.1 on BeagleBone Black platform. See for refrence: 1. https://build.opensuse.org/project/show/home:matwey:beaglebone 2. http://lists.opensuse.org/opensuse-arm/2014-01/msg00001.html 3. http://paste.opensuse.org/76652072 (kernel log without the patches) No other planform seems to be affected by this patches. patches.drivers/0000-ARM-edma-Add-function-to-manually-trigger-an-EDMA-ch.patch | 63 ++++++++++++++++++++++ patches.drivers/0001-dma-edma-Setup-parameters-to-DMA-MAX_NR_SG-at-a-time.patch | 80 ++++++++++++++++++++++++++++ patches.drivers/0002-dma-edma-Write-out-and-handle-MAX_NR_SG-at-a-given-t.patch | 159 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++ patches.drivers/0003-dma-edma-Find-missed-events-and-issue-them.patch | 138 ++++++++++++++++++++++++++++++++++++++++++++++++ patches.drivers/0004-dma-edma-Leave-linked-to-Null-slot-instead-of-DUMMY-.patch | 78 +++++++++++++++++++++++++++ patches.drivers/0005-dma-edma-Remove-limits-on-number-of-slots.patch | 38 ++++++++++++++ patches.fixes/0001-ARM-edma-Fix-clearing-of-unused-list-for-DT-DMA-reso.patch | 105 +++++++++++++++++++++++++++++++++++++ patches.fixes/0001-drivers-net-cpsw-fix-for-cpsw-crash-when-build-as-mo.patch | 66 +++++++++++++++++++++++ patches.fixes/0002-drivers-net-cpsw-fix-dt-probe-for-one-port-ethernet.patch | 34 ++++++++++++ series.conf | 10 ++++ 10 files changed, 771 insertions(+) create mode 100644 patches.drivers/0000-ARM-edma-Add-function-to-manually-trigger-an-EDMA-ch.patch create mode 100644 patches.drivers/0001-dma-edma-Setup-parameters-to-DMA-MAX_NR_SG-at-a-time.patch create mode 100644 patches.drivers/0002-dma-edma-Write-out-and-handle-MAX_NR_SG-at-a-given-t.patch create mode 100644 patches.drivers/0003-dma-edma-Find-missed-events-and-issue-them.patch create mode 100644 patches.drivers/0004-dma-edma-Leave-linked-to-Null-slot-instead-of-DUMMY-.patch create mode 100644 patches.drivers/0005-dma-edma-Remove-limits-on-number-of-slots.patch create mode 100644 patches.fixes/0001-ARM-edma-Fix-clearing-of-unused-list-for-DT-DMA-reso.patch create mode 100644 patches.fixes/0001-drivers-net-cpsw-fix-for-cpsw-crash-when-build-as-mo.patch create mode 100644 patches.fixes/0002-drivers-net-cpsw-fix-dt-probe-for-one-port-ethernet.patch -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-kernel+owner(a)opensuse.org

2 1

[opensuse-kernel] [PATCH] config: armv6hl: Extend default config for Raspberry Pi
by Andreas Färber 09 Jan '14

09 Jan '14

Enable CONFIG_FB_SIMPLE as that's what U-Boot exposes in DT. Signed-off-by: Andreas Färber <afaerber(a)suse.de> --- config/armv6hl/default | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/config/armv6hl/default b/config/armv6hl/default index a8d06c4..128863a 100644 --- a/config/armv6hl/default +++ b/config/armv6hl/default @@ -3743,7 +3743,7 @@ CONFIG_FB_METRONOME=m CONFIG_FB_MX3=m CONFIG_FB_BROADSHEET=m # CONFIG_FB_AUO_K190X is not set -# CONFIG_FB_SIMPLE is not set +CONFIG_FB_SIMPLE=y CONFIG_OMAP2_VRFB=y CONFIG_OMAP2_DSS=y # CONFIG_OMAP2_DSS_DEBUG is not set -- 1.8.4 -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-kernel+owner(a)opensuse.org

2 1

[opensuse-kernel] [PATCH] config: armv6hl: Extend default config for Raspberry Pi
by Andreas Färber 08 Jan '14

08 Jan '14

Activate CONFIG_ARM_ATAG_DTB_COMPAT for it to receive U-Boot bootargs. Enable BCM2835_{I2C,WDT}, MMC_SDHCI_BCM2835, USB_HCD_BCMA as modules. Signed-off-by: Andreas Färber <afaerber(a)suse.de> --- config/armv6hl/default | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-) diff --git a/config/armv6hl/default b/config/armv6hl/default index 9276c6a..a8d06c4 100644 --- a/config/armv6hl/default +++ b/config/armv6hl/default @@ -578,7 +578,9 @@ CONFIG_DEPRECATED_PARAM_STRUCT=y CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 CONFIG_ARM_APPENDED_DTB=y -# CONFIG_ARM_ATAG_DTB_COMPAT is not set +CONFIG_ARM_ATAG_DTB_COMPAT=y +CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_FROM_BOOTLOADER=y +# CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEND is not set CONFIG_CMDLINE="console=ttyAMA0" CONFIG_CMDLINE_FROM_BOOTLOADER=y # CONFIG_CMDLINE_EXTEND is not set @@ -2623,7 +2625,7 @@ CONFIG_I2C_ALGOBIT=y # # I2C system bus drivers (mostly embedded / system-on-chip) # -# CONFIG_I2C_BCM2835 is not set +CONFIG_I2C_BCM2835=m CONFIG_I2C_CBUS_GPIO=m # CONFIG_I2C_DESIGNWARE_PLATFORM is not set # CONFIG_I2C_GPIO is not set @@ -3012,7 +3014,7 @@ CONFIG_TWL4030_WATCHDOG=m CONFIG_MAX63XX_WATCHDOG=m CONFIG_IMX2_WDT=m CONFIG_KEMPLD_WDT=m -# CONFIG_BCM2835_WDT is not set +CONFIG_BCM2835_WDT=m CONFIG_MEN_A21_WDT=m # @@ -4018,7 +4020,7 @@ CONFIG_USB_SL811_HCD=m # CONFIG_USB_SL811_HCD_ISO is not set CONFIG_USB_R8A66597_HCD=m # CONFIG_USB_IMX21_HCD is not set -# CONFIG_USB_HCD_BCMA is not set +CONFIG_USB_HCD_BCMA=m CONFIG_USB_HCD_SSB=m # CONFIG_USB_HCD_TEST_MODE is not set # CONFIG_USB_MUSB_HDRC is not set @@ -4245,7 +4247,7 @@ CONFIG_MMC_SDHCI_ESDHC_IMX=m CONFIG_MMC_SDHCI_PXAV3=m CONFIG_MMC_SDHCI_PXAV2=m CONFIG_MMC_SDHCI_BCM_KONA=m -# CONFIG_MMC_SDHCI_BCM2835 is not set +CONFIG_MMC_SDHCI_BCM2835=m CONFIG_MMC_OMAP=m CONFIG_MMC_OMAP_HS=m CONFIG_MMC_MXC=m -- 1.8.4 -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-kernel+owner(a)opensuse.org

2 1

[opensuse-kernel] sequence-patch: Add support for xz-compressed archives and patches
by Jean Delvare 07 Jan '14

07 Jan '14

Hi all, While kernel.org still offers bz2 archives for download, the discussion about dropping them and only leaving gz and xz is coming back every now and then. So I believe we should anticipate a future removal of bz2 archives and get our scripts ready to deal with xz-compressed archives now. If nothing else, that would encourage everyone to use xz-compressed archives whenever possible, which is a great saving of network bandwidth and storage space, plus decompression is twice as fast as with bz2. Thus I'd like to add support for xz-compressed files to sequence-patch for a starter. I'm attaching the patch. It's only tested locally (outside of the suse network) so not all code paths were tested. Some more testing and review would be welcome. We could also consider using xz to compress all tar files in tar-up.sh (and update the spec files accordingly.) This may make submission somewhat slower, as compressing with xz is significantly slower than with bzip2, but this would save some upload time, storage space in IBS/OBS and should also improve the build times by a small bit. -- Jean Delvare Suse L3 Support

2 8

[opensuse-kernel] Rebuilding kernel using rpmbuild?
by Tetsuo Handa 06 Jan '14

06 Jan '14

Hello. I tried to rebuild 3.7.10-1.24.1 but got an error. How did you build it? # wget http://download.opensuse.org/update/12.3/src/kernel-source-3.7.10-1.24.1.sr… http://download.opensuse.org/update/12.3/nosrc/kernel-default-3.7.10-1.24.1… (...snipped...) # rpm --checksig kernel-source-3.7.10-1.24.1.src.rpm kernel-default-3.7.10-1.24.1.nosrc.rpm kernel-source-3.7.10-1.24.1.src.rpm: rsa sha1 (md5) pgp md5 OK kernel-default-3.7.10-1.24.1.nosrc.rpm: rsa sha1 (md5) pgp md5 OK # rpm -ivh kernel-source-3.7.10-1.24.1.src.rpm kernel-default-3.7.10-1.24.1.nosrc.rpm (...snipped...) # rpmbuild -bp --target i686 /usr/src/packages/SPECS/kernel-default.spec (...snipped...) scripts/kconfig/conf --silentoldconfig Kconfig * * Restart config... * * * RCU Subsystem * RCU Implementation > 1. Tree-based hierarchical RCU (TREE_RCU) choice[1]: 1 Consider userspace as in RCU extended quiescent state (RCU_USER_QS) [N/y/?] (NEW) aborted! Console input/output is redirected. Run 'make oldconfig' to update configuration. make[2]: *** [silentoldconfig] Error 1 make[1]: *** [silentoldconfig] Error 2 make: *** [sub-make] Error 2 make: Leaving directory `/usr/src/packages/BUILD/kernel-default-3.7.10/linux-3.7' error: Bad exit status from /var/tmp/rpm-tmp.F7WUiP (%prep) RPM build errors: Bad exit status from /var/tmp/rpm-tmp.F7WUiP (%prep) -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-kernel+owner(a)opensuse.org

4 5