December 2013 - openSUSE Kernel - openSUSE Mailing Lists

[opensuse-kernel] 13.1: flood of "nouveau E[ PFB][0000:01:00.0] trapped write at 0x01013e1b50 o n channel 0x00007ed0 [unknown] BAR/TEXTURE/IN reason: PAGE_NOT_PRESENT"
by Andrey Borzenkov 11 Dec '13

11 Dec '13

I updated to 13.1 recently; before update I removed nVidia driver and thought I look at how nouveau behaves. It appears to work (even with thermal management) but dmesg is flooded on boot with messages similar to [ 51.124732] nouveau E[ PFB][0000:01:00.0] trapped write at 0x01013cc970 on channel 0x00007ed0 [unknown] BAR/TEXTURE/IN reason: PAGE_NOT_PRESENT [ 51.125042] nouveau E[ PFB][0000:01:00.0] trapped write at 0x01013ccbc0 on channel 0x00007ed0 [unknown] BAR/TEXTURE/IN reason: PAGE_NOT_PRESENT [ 51.125076] nouveau E[ PFB][0000:01:00.0] trapped write at 0x01013d0bb0 on channel 0x00007ed0 [unknown] BAR/TEXTURE/IN reason: PAGE_NOT_PRESENT [ 51.125809] nouveau E[ PFB][0000:01:00.0] trapped write at 0x01013d0df0 on channel 0x00007ed0 [unknown] BAR/TEXTURE/IN reason: PAGE_NOT_PRESENT [ 51.125849] nouveau E[ PFB][0000:01:00.0] trapped write at 0x01013d88a0 on channel 0x00007ed0 [unknown] BAR/TEXTURE/IN reason: PAGE_NOT_PRESENT Not sure whether they indicate some issue ... should I open bug report? Dec 11 23:41:05 opensuse kernel: nouveau [ DEVICE][0000:01:00.0] BOOT0 : 0x086700a2 Dec 11 23:41:05 opensuse kernel: nouveau [ DEVICE][0000:01:00.0] Chipset: G86 (NV86) Dec 11 23:41:05 opensuse kernel: nouveau [ DEVICE][0000:01:00.0] Family : NV50 Dec 11 23:41:05 opensuse kernel: nouveau [ VBIOS][0000:01:00.0] checking PRAMIN for image... Dec 11 23:41:05 opensuse kernel: nouveau [ VBIOS][0000:01:00.0] ... appears to be valid Dec 11 23:41:05 opensuse kernel: nouveau [ VBIOS][0000:01:00.0] using image from PRAMIN Dec 11 23:41:05 opensuse kernel: nouveau [ VBIOS][0000:01:00.0] BIT signature found Dec 11 23:41:05 opensuse kernel: nouveau [ VBIOS][0000:01:00.0] version 60.86.45.00.40 Dec 11 23:41:05 opensuse kernel: nouveau [ PFB][0000:01:00.0] RAM type: GDDR3 Dec 11 23:41:05 opensuse kernel: nouveau [ PFB][0000:01:00.0] RAM size: 128 MiB Dec 11 23:41:05 opensuse kernel: nouveau [ PFB][0000:01:00.0] ZCOMP: 646 tags Dec 11 23:41:05 opensuse kernel: nouveau [ PTHERM][0000:01:00.0] FAN control: PWM Dec 11 23:41:05 opensuse kernel: nouveau [ PTHERM][0000:01:00.0] fan management: disabled Dec 11 23:41:05 opensuse kernel: nouveau [ PTHERM][0000:01:00.0] internal sensor: yes Dec 11 23:41:05 opensuse kernel: nouveau [ PTHERM][0000:01:00.0] temperature (88 C) hit the 'fanboost' threshold Dec 11 23:41:05 opensuse kernel: nouveau [ PTHERM][0000:01:00.0] fan management: automatic Dec 11 23:41:05 opensuse kernel: nouveau [ DRM] VRAM: 128 MiB Dec 11 23:41:05 opensuse kernel: nouveau [ DRM] GART: 1048576 MiB Dec 11 23:41:05 opensuse kernel: nouveau [ DRM] TMDS table version 2.0 Dec 11 23:41:05 opensuse kernel: nouveau [ DRM] DCB version 4.0 Dec 11 23:41:05 opensuse kernel: nouveau [ DRM] DCB outp 00: 01000323 00010034 Dec 11 23:41:05 opensuse kernel: nouveau [ DRM] DCB outp 01: 02011300 00000028 Dec 11 23:41:05 opensuse kernel: nouveau [ DRM] DCB outp 02: 02022312 00020010 Dec 11 23:41:05 opensuse kernel: nouveau [ DRM] DCB conn 00: 0041 Dec 11 23:41:05 opensuse kernel: nouveau [ DRM] DCB conn 01: 0100 Dec 11 23:41:05 opensuse kernel: nouveau [ DRM] DCB conn 02: 2261 Dec 11 23:41:05 opensuse kernel: nouveau [ DRM] DCB conn 03: 0310 Dec 11 23:41:05 opensuse kernel: nouveau [ DRM] DCB conn 04: 0311 Dec 11 23:41:05 opensuse kernel: nouveau [ DRM] DCB conn 05: 0313 Dec 11 23:41:05 opensuse kernel: nouveau [ DRM] ACPI backlight interface available, not registering our own Dec 11 23:41:05 opensuse kernel: nouveau [ DRM] 3 available performance level(s) Dec 11 23:41:05 opensuse kernel: nouveau [ DRM] 0: core 169MHz shader 338MHz memory 100MHz voltage 1150mV fanspeed 100% Dec 11 23:41:05 opensuse kernel: nouveau [ DRM] 1: core 275MHz shader 550MHz memory 301MHz voltage 1150mV fanspeed 100% Dec 11 23:41:05 opensuse kernel: nouveau [ DRM] 2: core 400MHz shader 800MHz memory 600MHz voltage 1150mV fanspeed 100% Dec 11 23:41:05 opensuse kernel: nouveau [ DRM] c: core 200MHz shader 400MHz memory 351MHz voltage 1150mV fanspeed 100% Dec 11 23:41:05 opensuse kernel: nouveau [ DRM] MM: using CRYPT for buffer copies Dec 11 23:41:06 opensuse kernel: nouveau [ DRM] allocated 1280x800 fb: 0x60000, bo ffff880119398000 Dec 11 23:41:06 opensuse kernel: fbcon: nouveaufb (fb0) is primary device Dec 11 23:41:06 opensuse kernel: nouveau 0000:01:00.0: fb0: nouveaufb frame buffer device Dec 11 23:41:06 opensuse kernel: nouveau 0000:01:00.0: registered panic notifier Dec 11 23:41:06 opensuse kernel: [drm] Initialized nouveau 1.1.1 20120801 for 0000:01:00.0 on minor 0 Dec 11 23:41:06 opensuse kernel: nouveau E[ PFB][0000:01:00.0] trapped write at 0x0101000000 on channel 0x00007ed0 [unknown] BAR/TEXTURE/IN reason: PAGE_NOT_PRESENT .... -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-kernel+owner(a)opensuse.org

1 0

[opensuse-kernel] [PATCH] master armv7 default config fix
by Guillaume Gardet 11 Dec '13

11 Dec '13

Hi, Following my patches for 13.1 branch, here are the same patches, but for _master_ branch. * Patch 1: Set CONFIG_GPIO_TWL4030 as built-in (instead of module) as a requirement to boot on SD card on beagleboard xM * Patch 2: Add USB PHY support (needed to get USB and Ethernet working on beagle and panda boards) Add CONFIG_PINCTRL_SINGLE=y to be able to use Device tree (at least for beagle and panda boards) Add ARM SoC sound support Add SPI bus support Add user-space access to I2C and SPI Signed-off-by: Guillaume GARDET <guillaume.gardet(a)opensuse.org> Regards, Guillaume

2 4

[opensuse-kernel] 3.13 RC2 pending for factory
by Stephan Kulow 09 Dec '13

09 Dec '13

Hi, I thought the agreement was that we have :stable in factory till new major versions are considered good enough for factory. Is that the case with RC2? Greetings, Stephan -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-kernel+owner(a)opensuse.org

3 5

[opensuse-kernel] pcieport 0000:00:03.0: driver skip pci_set_master, fix it!
by Cristian Rodríguez 08 Dec '13

08 Dec '13

I am getting the message in $SUBJECT with current kernel:HEAD lspci said that device is: 00:03.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 3 (rev 13) No idea how to proceed further or if this something to be concerned. Any hint appreciated. -- "If debugging is the process of removing bugs, then programming must be the process of putting them in." - Edsger Dijkstra -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-kernel+owner(a)opensuse.org

3 5

[opensuse-kernel] Enabling CONFIG_CHECKPOINT_RESTORE
by Takashi Iwai 05 Dec '13

05 Dec '13

Hi, I'm going to enable CONFIG_CHECKPOINT_RESTORE on kernel HEAD, for supporting CRIU: http://criu.org The user-space package is found in OBS devel:tools/criu repo. It was submitted to FACTORY now, too. Currently it's x86-64 only, so I'll enable the kconfigs only there. This will eventually require CONFIG_EXPERT, so it'll be, too. If anyone has objections / concerns, please speak up. thanks, Takashi -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-kernel+owner(a)opensuse.org

2 2

[opensuse-kernel] no more RW for / by default?
by Felix Miata 01 Dec '13

01 Dec '13

1-cloned a nicely functional 13.1 partition 2-assigned new UUID & partition label, updated Grub menu & fstab on cloned partition 3-booted the clone 4-zypper clean -a 5-replace 13.1 repos with Factory's in /etc/zypp/repos.d/ 6-zypper ref; zypper in zypper libzypp rpm glibc libsolv-tools, udev systemd; zypper -v dup 7-booted the updated clone partition to the newly installed kernel Result: can't do much until manually remounting / rw Booting 13.1's 3.11.6 init mounts / rw. Either I have to add rw to cmdline, or remount / rw before doing much of anything is possible. Is this expected with 3.12.1? Expected of Dracut? Bug? Explicit rw now required for / in fstab? -- "The wise are known for their understanding, and pleasant words are persuasive." Proverbs 16:21 (New Living Translation) Team OS/2 ** Reg. Linux User #211409 ** a11y rocks! Felix Miata *** http://fm.no-ip.com/ -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-kernel+owner(a)opensuse.org

3 3