July 2012 - openSUSE Kernel - openSUSE Mailing Lists

[opensuse-kernel] kernel-default-base-2.6.29-5.2.x86_64 rpm errors
by Dave Plater 18 Jul '24

18 Jul '24

Hi, I'm busy updating to the latest factory kernel and have received the following errors from kernel-default-base installation (I did insert a blank dvd during the installation of the rpm by zypper):- WARNING: /lib/modules/2.6.29-rc8-5-default/kernel/drivers/scsi/sd_mod.ko needs unknown symbol crc_t10dif WARNING: /lib/modules/2.6.29-rc8-5-default/kernel/drivers/scsi/sr_mod.ko needs unknown symbol register_cdrom WARNING: /lib/modules/2.6.29-rc8-5-default/kernel/drivers/scsi/sr_mod.ko needs unknown symbol cdrom_ioctl WARNING: /lib/modules/2.6.29-rc8-5-default/kernel/drivers/scsi/sr_mod.ko needs unknown symbol cdrom_media_changed WARNING: /lib/modules/2.6.29-rc8-5-default/kernel/drivers/scsi/sr_mod.ko needs unknown symbol cdrom_get_media_event WARNING: /lib/modules/2.6.29-rc8-5-default/kernel/drivers/scsi/sr_mod.ko needs unknown symbol cdrom_release WARNING: /lib/modules/2.6.29-rc8-5-default/kernel/drivers/scsi/sr_mod.ko needs unknown symbol cdrom_open WARNING: /lib/modules/2.6.29-rc8-5-default/kernel/drivers/scsi/sr_mod.ko needs unknown symbol unregister_cdrom WARNING: /lib/modules/2.6.29-rc8-5-default/kernel/drivers/scsi/sr_mod.ko needs unknown symbol cdrom_number_of_slots And then these errors which I think IIRC happened before when the kernel was first split into three:- Kernel image: /boot/vmlinuz-2.6.29-rc8-5-default Initrd image: /boot/initrd-2.6.29-rc8-5-default Root device: /dev/disk/by-id/ata-WDC_WD800JB-00JJC0_WD-WMAM9RA78067-part3 (/dev/sda3) (mounted on / as xfs) Resume device: /dev/disk/by-id/ata-WDC_WD800JB-00JJC0_WD-WMAM9RA78067-part2 (/dev/sda2) FATAL: Module processor not found. WARNING: no dependencies for kernel module 'processor' found. FATAL: Module thermal not found. WARNING: no dependencies for kernel module 'thermal' found. FATAL: Module ata_generic not found. WARNING: no dependencies for kernel module 'ata_generic' found. FATAL: Module piix not found. WARNING: no dependencies for kernel module 'piix' found. FATAL: Module ide_pci_generic not found. WARNING: no dependencies for kernel module 'ide_pci_generic' found. FATAL: Module fan not found. WARNING: no dependencies for kernel module 'fan' found. FATAL: Module xfs not found. WARNING: no dependencies for kernel module 'xfs' found. FATAL: Module usbhid not found. WARNING: no dependencies for kernel module 'usbhid' found. Kernel Modules: scsi_mod libata ata_piix edd ahci sd_mod usbcore ohci-hcd ehci-hcd uhci-hcd WARNING: /dev/shm/mkinitramfs.0drQsZ/mnt/lib/modules/2.6.29-rc8-5-default/kernel/drivers/scsi/sd_mod.ko needs unknown symbol crc_t10dif Features: block usb resume.userspace resume.kernel Bootsplash: openSUSE (1280x1024) 22669 blocks Should I open a bug report about the errors which are possibly from inserting a dvd while the kernel rpm was installing? Regards Dave P -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-kernel+help(a)opensuse.org

2 2

[opensuse-kernel] CONFIG_CC_STACKPROTECTOR
by richard -rw- weinberger 14 Dec '13

14 Dec '13

Hi! I'm wondering why CONFIG_CC_STACKPROTECTOR is disabled on openSUSE. Debian and Fedora seem to enabled it per default. What's the deal? -- Thanks, //richard -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-kernel+owner(a)opensuse.org

7 17

[opensuse-kernel] [PATCH] add missing modules aliases to fix audio on omap devices
by Guillaume Gardet 06 Aug '12

06 Aug '12

Hi, please find a patch to add missing modules aliases to fix audio on omap devices. It applies to 3.5-rc4 (master) and 3.4.4 (12.2 branch). I submitted this patch to linux-omap ML: http://marc.info/?l=linux-omap&m=134139781807513&w=2 Patch-mainline: Submitted on 04/07/2012 Signed-off-by: Guillaume GARDET <guillaume.gardet(a)opensuse.org>

3 7

[opensuse-kernel] PATCH: fixed i2c coredesign build on powerpc
by Marcus Meissner 01 Aug '12

01 Aug '12

Hi, This patch fixes the i2c coredesign build failures for PowerPC 32bit -default flavour. It is not yet in mainline. It needs a run of this magic "new config option thingie" script to add the new config option. Ciao, Marcus

3 4

[opensuse-kernel] PATCH: enable RTL8150
by Dirk Müller 30 Jul '12

30 Jul '12

Hi, useful for master and for openSUSE-12.2. Please apply. TIA, Dirk From 5d95a616e0249eec864d6feb58f58debc0b92a2e Mon Sep 17 00:00:00 2001 From: Dirk Mueller <dmueller(a)suse.com> Date: Mon, 30 Jul 2012 21:00:23 +0200 Subject: [PATCH] Enable RTL8150 for omap2plus Generic USB Network device that also works fine on ARM, so enable it Signed-off-by: Dirk Mueller <dmueller(a)suse.com> --- config/armv7hl/omap2plus | 2 +- 1 Datei geändert, 1 Zeile hinzugefügt(+), 1 Zeile entfernt(-) diff --git a/config/armv7hl/omap2plus b/config/armv7hl/omap2plus index 0406fc6..5d1f3c4 100644 --- a/config/armv7hl/omap2plus +++ b/config/armv7hl/omap2plus @@ -1617,7 +1617,7 @@ CONFIG_MICREL_KS8995MA=m # CONFIG_USB_CATC is not set # CONFIG_USB_KAWETH is not set # CONFIG_USB_PEGASUS is not set -# CONFIG_USB_RTL8150 is not set +CONFIG_USB_RTL8150=m CONFIG_USB_USBNET=y CONFIG_USB_NET_AX8817X=y CONFIG_USB_NET_CDCETHER=y -- 1.7.10.4 -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-kernel+owner(a)opensuse.org

1 0

[opensuse-kernel] APEI: Invalid bit width + offset in GAR
by Cristian Rodríguez 30 Jul '12

30 Jul '12

Hi: I a remote machine, after "upgrading" it from Centos 5 to openSUSE 12.1 with kernel 3.4.1 from kernel:Stable, my logs are beign flooded with [Firmware Bug]: APEI: Invalid bit width + offset in GAR [0xbf7c4ba0/32/0/1/0] (Needless to say, I already updated the system's BIOS) thousands of times.. I couldnt care less about this APEI thing but I cannot find the right kernel parameter/ BIOS option to get it to stop flooding the system log. Any hints ? -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-kernel+owner(a)opensuse.org

3 6

[opensuse-kernel] PATCH: disable designware platform
by Marcus Meissner 27 Jul '12

27 Jul '12

>From 231f296cd9ab56019bc8bd7c60b239990dc5edcc Mon Sep 17 00:00:00 2001 From: Marcus Meissner <meissner(a)suse.de> Date: Fri, 27 Jul 2012 11:52:35 +0200 Subject: [PATCH] disable I2C_DESIGNWARE_PLATFORM to make it build the platform drivers are only for very old ppc32 hardware. (should make kernel-default built for the first time since 3.1 :/ ) Signed-off-by: Marcus Meissner <meissner(a)suse.de> --- config/ppc/default | 2 +- config/ppc/vanilla | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/config/ppc/default b/config/ppc/default index 9da37c8..4137dcc 100644 --- a/config/ppc/default +++ b/config/ppc/default @@ -2632,8 +2632,8 @@ CONFIG_I2C_POWERMAC=y # # I2C system bus drivers (mostly embedded / system-on-chip) # -CONFIG_I2C_DESIGNWARE_PLATFORM=m CONFIG_I2C_DESIGNWARE_PCI=m +# CONFIG_I2C_DESIGNWARE_PLATFORM is not set CONFIG_I2C_EG20T=m CONFIG_I2C_GPIO=m # CONFIG_I2C_INTEL_MID is not set diff --git a/config/ppc/vanilla b/config/ppc/vanilla index d3daae5..97dd950 100644 --- a/config/ppc/vanilla +++ b/config/ppc/vanilla @@ -2627,8 +2627,8 @@ CONFIG_I2C_POWERMAC=y # # I2C system bus drivers (mostly embedded / system-on-chip) # -CONFIG_I2C_DESIGNWARE_PLATFORM=m CONFIG_I2C_DESIGNWARE_PCI=m +# CONFIG_I2C_DESIGNWARE_PLATFORM is not set CONFIG_I2C_EG20T=m CONFIG_I2C_GPIO=m # CONFIG_I2C_INTEL_MID is not set -- 1.7.9.2 -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-kernel+owner(a)opensuse.org

1 0

[opensuse-kernel] PR_SET_NO_NEW_PRIVS ?
by Cristian Rodríguez 26 Jul '12

26 Jul '12

Hi: openSSH nows offers a linux-native sandbox that requires PR_SET_NO_NEW_PRIVS prctl(2) , however I cannot find where is it defined in my shiny new openSUSE 12.2 ... Is this supposed to be defined by the kernel headers or by yet-another-is-userspace-problem library ? -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-kernel+owner(a)opensuse.org

2 3

[opensuse-kernel] [PATCH] rt2x00 : fix rt3290 resuming failed.
by Chen, Chien-Chia 26 Jul '12

26 Jul '12

This patch is going to fix the resuming failed from S3/S4 for rt3290 chip. Signed-off-by: Chen, Chien-Chia <machen(a)suse.com> CC-by: Kevin Chou <kevin.chou(a)mediatek.com> diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c index e76f03c..1d535a0 100644 --- a/drivers/net/wireless/rt2x00/rt2800lib.c +++ b/drivers/net/wireless/rt2x00/rt2800lib.c @@ -400,6 +400,13 @@ int rt2800_load_firmware(struct rt2x00_dev *rt2x00dev, { unsigned int i; u32 reg; + int retval; + + if (rt2x00_rt(rt2x00dev, RT3290)) { + retval = rt2800_enable_wlan_rt3290(rt2x00dev); + if (retval) + return -EBUSY; + } /* * If driver doesn't wake up firmware here, @@ -5152,6 +5159,65 @@ int rt2800_get_survey(struct ieee80211_hw *hw, int idx, } EXPORT_SYMBOL_GPL(rt2800_get_survey); +int rt2800_enable_wlan_rt3290(struct rt2x00_dev *rt2x00dev) +{ + u32 reg; + int i, count; + + rt2800_register_read(rt2x00dev, WLAN_FUN_CTRL, &reg); + if (rt2x00_get_field32(reg, WLAN_EN)) + return 0; + + rt2x00_set_field32(&reg, WLAN_GPIO_OUT_OE_BIT_ALL, 0xff); + rt2x00_set_field32(&reg, FRC_WL_ANT_SET, 1); + rt2x00_set_field32(&reg, WLAN_CLK_EN, 0); + rt2x00_set_field32(&reg, WLAN_EN, 1); + rt2800_register_write(rt2x00dev, WLAN_FUN_CTRL, reg); + + udelay(REGISTER_BUSY_DELAY); + count = 0; + do { + /* + * Check PLL_LD & XTAL_RDY. + */ + for (i = 0; i < REGISTER_BUSY_COUNT; i++) { + rt2800_register_read(rt2x00dev, CMB_CTRL, &reg); + if (rt2x00_get_field32(reg, PLL_LD) && + rt2x00_get_field32(reg, XTAL_RDY)) + break; + udelay(REGISTER_BUSY_DELAY); + } + if (i >= REGISTER_BUSY_COUNT) { + if (count >= 10) + return -EIO; + + rt2800_register_write(rt2x00dev, 0x58, 0x018); + udelay(REGISTER_BUSY_DELAY); + rt2800_register_write(rt2x00dev, 0x58, 0x418); + udelay(REGISTER_BUSY_DELAY); + rt2800_register_write(rt2x00dev, 0x58, 0x618); + udelay(REGISTER_BUSY_DELAY); + count++; + } else { + count = 0; + } + + rt2800_register_read(rt2x00dev, WLAN_FUN_CTRL, &reg); + rt2x00_set_field32(&reg, PCIE_APP0_CLK_REQ, 0); + rt2x00_set_field32(&reg, WLAN_CLK_EN, 1); + rt2x00_set_field32(&reg, WLAN_RESET, 1); + rt2800_register_write(rt2x00dev, WLAN_FUN_CTRL, reg); + udelay(10); + rt2x00_set_field32(&reg, WLAN_RESET, 0); + rt2800_register_write(rt2x00dev, WLAN_FUN_CTRL, reg); + udelay(10); + rt2800_register_write(rt2x00dev, INT_SOURCE_CSR, 0x7fffffff); + } while (count != 0); + + return 0; +} +EXPORT_SYMBOL_GPL(rt2800_enable_wlan_rt3290); + MODULE_AUTHOR(DRV_PROJECT ", Bartlomiej Zolnierkiewicz"); MODULE_VERSION(DRV_VERSION); MODULE_DESCRIPTION("Ralink RT2800 library"); diff --git a/drivers/net/wireless/rt2x00/rt2800lib.h b/drivers/net/wireless/rt2x00/rt2800lib.h index 18a0b67..12d6eeb 100644 --- a/drivers/net/wireless/rt2x00/rt2800lib.h +++ b/drivers/net/wireless/rt2x00/rt2800lib.h @@ -209,5 +209,5 @@ int rt2800_ampdu_action(struct ieee80211_hw *hw, struct ieee80211_vif *vif, int rt2800_get_survey(struct ieee80211_hw *hw, int idx, struct survey_info *survey); void rt2800_disable_wpdma(struct rt2x00_dev *rt2x00dev); - +int rt2800_enable_wlan_rt3290(struct rt2x00_dev *rt2x00dev); #endif /* RT2800LIB_H */ diff --git a/drivers/net/wireless/rt2x00/rt2800pci.c b/drivers/net/wireless/rt2x00/rt2800pci.c index 235376e..b7a02bf 100644 --- a/drivers/net/wireless/rt2x00/rt2800pci.c +++ b/drivers/net/wireless/rt2x00/rt2800pci.c @@ -980,66 +980,6 @@ static int rt2800pci_validate_eeprom(struct rt2x00_dev *rt2x00dev) return rt2800_validate_eeprom(rt2x00dev); } -static int rt2800_enable_wlan_rt3290(struct rt2x00_dev *rt2x00dev) -{ - u32 reg; - int i, count; - - rt2800_register_read(rt2x00dev, WLAN_FUN_CTRL, &reg); - if (rt2x00_get_field32(reg, WLAN_EN)) - return 0; - - rt2x00_set_field32(&reg, WLAN_GPIO_OUT_OE_BIT_ALL, 0xff); - rt2x00_set_field32(&reg, FRC_WL_ANT_SET, 1); - rt2x00_set_field32(&reg, WLAN_CLK_EN, 0); - rt2x00_set_field32(&reg, WLAN_EN, 1); - rt2800_register_write(rt2x00dev, WLAN_FUN_CTRL, reg); - - udelay(REGISTER_BUSY_DELAY); - - count = 0; - do { - /* - * Check PLL_LD & XTAL_RDY. - */ - for (i = 0; i < REGISTER_BUSY_COUNT; i++) { - rt2800_register_read(rt2x00dev, CMB_CTRL, &reg); - if (rt2x00_get_field32(reg, PLL_LD) && - rt2x00_get_field32(reg, XTAL_RDY)) - break; - udelay(REGISTER_BUSY_DELAY); - } - - if (i >= REGISTER_BUSY_COUNT) { - - if (count >= 10) - return -EIO; - - rt2800_register_write(rt2x00dev, 0x58, 0x018); - udelay(REGISTER_BUSY_DELAY); - rt2800_register_write(rt2x00dev, 0x58, 0x418); - udelay(REGISTER_BUSY_DELAY); - rt2800_register_write(rt2x00dev, 0x58, 0x618); - udelay(REGISTER_BUSY_DELAY); - count++; - } else { - count = 0; - } - - rt2800_register_read(rt2x00dev, WLAN_FUN_CTRL, &reg); - rt2x00_set_field32(&reg, PCIE_APP0_CLK_REQ, 0); - rt2x00_set_field32(&reg, WLAN_CLK_EN, 1); - rt2x00_set_field32(&reg, WLAN_RESET, 1); - rt2800_register_write(rt2x00dev, WLAN_FUN_CTRL, reg); - udelay(10); - rt2x00_set_field32(&reg, WLAN_RESET, 0); - rt2800_register_write(rt2x00dev, WLAN_FUN_CTRL, reg); - udelay(10); - rt2800_register_write(rt2x00dev, INT_SOURCE_CSR, 0x7fffffff); - } while (count != 0); - - return 0; -} static int rt2800pci_probe_hw(struct rt2x00_dev *rt2x00dev) { int retval; -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-kernel+owner(a)opensuse.org

4 5

[opensuse-kernel] Can Kernel:HEAD be updated from linux-3.5-rc6 to linux-3.5
by doiggl＠velocitynet.com.au 24 Jul '12

24 Jul '12

Hello, Can Kernel:HEAD be updated from linux-3.5-rc6 to linux-3.5 Thanks Glenn https://build.opensuse.org/project/show?project=Kernel%3AHEAD http://www.kernel.org/pub/linux/kernel/v3.0/linux-3.5.tar.bz2 -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-kernel+owner(a)opensuse.org

2 1