August 2010 - openSUSE Kernel - openSUSE Mailing Lists

[opensuse-kernel] kernel-default-base-2.6.29-5.2.x86_64 rpm errors
by Dave Plater 18 Jul '24

18 Jul '24

Hi, I'm busy updating to the latest factory kernel and have received the following errors from kernel-default-base installation (I did insert a blank dvd during the installation of the rpm by zypper):- WARNING: /lib/modules/2.6.29-rc8-5-default/kernel/drivers/scsi/sd_mod.ko needs unknown symbol crc_t10dif WARNING: /lib/modules/2.6.29-rc8-5-default/kernel/drivers/scsi/sr_mod.ko needs unknown symbol register_cdrom WARNING: /lib/modules/2.6.29-rc8-5-default/kernel/drivers/scsi/sr_mod.ko needs unknown symbol cdrom_ioctl WARNING: /lib/modules/2.6.29-rc8-5-default/kernel/drivers/scsi/sr_mod.ko needs unknown symbol cdrom_media_changed WARNING: /lib/modules/2.6.29-rc8-5-default/kernel/drivers/scsi/sr_mod.ko needs unknown symbol cdrom_get_media_event WARNING: /lib/modules/2.6.29-rc8-5-default/kernel/drivers/scsi/sr_mod.ko needs unknown symbol cdrom_release WARNING: /lib/modules/2.6.29-rc8-5-default/kernel/drivers/scsi/sr_mod.ko needs unknown symbol cdrom_open WARNING: /lib/modules/2.6.29-rc8-5-default/kernel/drivers/scsi/sr_mod.ko needs unknown symbol unregister_cdrom WARNING: /lib/modules/2.6.29-rc8-5-default/kernel/drivers/scsi/sr_mod.ko needs unknown symbol cdrom_number_of_slots And then these errors which I think IIRC happened before when the kernel was first split into three:- Kernel image: /boot/vmlinuz-2.6.29-rc8-5-default Initrd image: /boot/initrd-2.6.29-rc8-5-default Root device: /dev/disk/by-id/ata-WDC_WD800JB-00JJC0_WD-WMAM9RA78067-part3 (/dev/sda3) (mounted on / as xfs) Resume device: /dev/disk/by-id/ata-WDC_WD800JB-00JJC0_WD-WMAM9RA78067-part2 (/dev/sda2) FATAL: Module processor not found. WARNING: no dependencies for kernel module 'processor' found. FATAL: Module thermal not found. WARNING: no dependencies for kernel module 'thermal' found. FATAL: Module ata_generic not found. WARNING: no dependencies for kernel module 'ata_generic' found. FATAL: Module piix not found. WARNING: no dependencies for kernel module 'piix' found. FATAL: Module ide_pci_generic not found. WARNING: no dependencies for kernel module 'ide_pci_generic' found. FATAL: Module fan not found. WARNING: no dependencies for kernel module 'fan' found. FATAL: Module xfs not found. WARNING: no dependencies for kernel module 'xfs' found. FATAL: Module usbhid not found. WARNING: no dependencies for kernel module 'usbhid' found. Kernel Modules: scsi_mod libata ata_piix edd ahci sd_mod usbcore ohci-hcd ehci-hcd uhci-hcd WARNING: /dev/shm/mkinitramfs.0drQsZ/mnt/lib/modules/2.6.29-rc8-5-default/kernel/drivers/scsi/sd_mod.ko needs unknown symbol crc_t10dif Features: block usb resume.userspace resume.kernel Bootsplash: openSUSE (1280x1024) 22669 blocks Should I open a bug report about the errors which are possibly from inserting a dvd while the kernel rpm was installing? Regards Dave P -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-kernel+help(a)opensuse.org

2 2

[opensuse-kernel] %changelog not in descending chronological order - [Kernel:HEAD/openSUSE_11.3]
by doiggl＠velocitynet.com.au 09 Sep '10

09 Sep '10

Hello, I see many failures listed at [1] Example from this log [2] I see the message ----------------------------------------------------------------- ----- building kernel-source.spec (user abuild) ----------------------------------------------------------------- ----------------------------------------------------------------- + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --define 'disturl obs://build.opensuse.org/Kernel:HEAD/openSUSE_11.3/254ef1b6295a7420c56ce8ee…' --eval %suse_insert_debug_package /usr/src/packages/SOURCES/kernel-source.spec error: %changelog not in descending chronological order [1] https://build.opensuse.org/project/monitor?project=Kernel%3AHEAD [2] https://build.opensuse.org/package/live_build_log?arch=x86_64&package=kerne… Fyi Glenn -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-kernel+help(a)opensuse.org

4 7

Re: [opensuse-kernel] SSD / filesystem / TRIM
by Greg Freemyer 31 Aug '10

31 Aug '10

On Tue, Aug 31, 2010 at 9:05 AM, Mark Lord <kernel(a)teksavvy.com> wrote: > On 10-08-31 08:51 AM, Greg Freemyer wrote: >> >> Does hdparm v.9.30 have any known kernel dependencies that would keep >> it from working with 2.6.31? >> >> Or any other known issues that would argue against opensuse pushing it >> out as a software update for 11.2 and 11.3? >> >> Or at least putting it in a OBS repo so people using wiper.sh/hdparm >> can use the latest if they load if from the repo.. > > > No issues that I know about. > My own opinion, is that _anyone_ using hdparm should be using v9.30. > > Cheers Mark, Thanks Thomas, I opened a bugzilla about it: https://bugzilla.novell.com/show_bug.cgi?id=635920 I hope you'll add yourself as a cc: and test hdparm v9.30 if and when it is available for test. Thanks Greg -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-kernel+help(a)opensuse.org

2 2

Re: [opensuse-kernel] SSD / filesystem / TRIM
by Greg Freemyer 31 Aug '10

31 Aug '10

On Tue, Aug 31, 2010 at 8:36 AM, Mark Lord <kernel(a)teksavvy.com> wrote: > On 10-08-30 03:14 PM, Greg Freemyer wrote: >> >> Mark, any thoughts why it didn't work. Have you added anything >> relevant to hdparm since v.9.28 that would help? > > > It probably failed because it couldn't cope with the long trimlist > that was fed to it. That's the drive's fault, really. > > But the latest hdparm/wiper from sourceforge should fare better, > as it now defaults to assuming the SSD cannot handle long trim lists. > > Cheers Mark, Does hdparm v.9.30 have any known kernel dependencies that would keep it from working with 2.6.31? Or any other known issues that would argue against opensuse pushing it out as a software update for 11.2 and 11.3? Or at least putting it in a OBS repo so people using wiper.sh/hdparm can use the latest if they load if from the repo.. Thanks Greg -- Greg Freemyer Head of EDD Tape Extraction and Processing team Litigation Triage Solutions Specialist http://www.linkedin.com/in/gregfreemyer CNN/TruTV Aired Forensic Imaging Demo - http://insession.blogs.cnn.com/2010/03/23/how-computer-evidence-gets-retrie… The Norcross Group The Intersection of Evidence & Technology http://www.norcrossgroup.com -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-kernel+help(a)opensuse.org

1 0

[opensuse-kernel] SSD / filesystem / TRIM
by Thomas Hertweck 30 Aug '10

30 Aug '10

Hi! I asked a question on the opensuse-de mailing list and Philipp Thomas gave me a tip to better try the opensuse-kernel mailing list, so here we go: What filesystem should be used for partitions on an SSD? Or does the filesystem not really matter? Are there any special mount options that should be used? Does Linux nowadays fully support TRIM? There is of course some information about these topics on the internet or in the opensuse mailing list archives, but quite a lot of information seems to be outdated or even inconsistent: Some people say the Linux kernel supports TRIM but it's not fully implemented according to the ATA-8 standard. Some people say /tmp or /var should not be put on an SSD because of frequent writes. Some people even say they had problems with SSDs under Linux in general and faced permanent timeout problems. Some people recommend the use of special scripts (TRIM related) that seem to be part of the hdparm package, others say they are no longer required since kernel 2.6.33. I am not an expert on these issues, therefore I (and I am sure others as well) would appreciate some input from the experts regarding these questions. Thanks in advance for shedding some light on the issues. Regards, Thomas -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-kernel+help(a)opensuse.org

6 10

[opensuse-kernel] setting the CONFIG_REISER4=m parameter
by doiggl＠velocitynet.com.au 29 Aug '10

29 Aug '10

Hello, Thanks for all the help. As stated earlier from [1] CONFIG_REISER4=m ... or whatever it is into config.addon/x86_64/vanilla, tar it up into config.addon.tar.bz2, and it will get pulled in automatically. Will that actually make all the changes to the .config file because after applying these settings # make menuconfig locally File systems ---> <M> The Extended 4 (ext4) filesystem It changed over 300 lines changed in the .config , that seems alot. # diff .config .config.old | grep -i "<" | wc -l 209 # diff .config .config.old | grep -i ">" | wc -l 119 This is to fix the following error [2] in project [3]. A step closer at least the patch applied. Thanks Glenn [1] http://lists.opensuse.org/opensuse-kernel/2010-08/msg00054.html [2] compilation details [part] + patch -s -F0 -E -p1 --no-backup-if-mismatch -i ../patches.rpmify/reiser4-for-2.6.35.patch + cd /usr/src/packages/BUILD/reiser4-2.6.35.4/linux-obj + '[' -f /usr/src/packages/SOURCES/localversion ']' + test -e ../config.addon/x86_64/desktop + cp ../config/x86_64/desktop .config + /usr/src/packages/BUILD/reiser4-2.6.35.4/linux-2.6.35/scripts/config --set-str CONFIG_LOCALVERSION -21-desktop --enable CONFIG_SUSE_KERNEL --disable CONFIG_DEBUG_INFO + MAKE_ARGS=' -C /usr/src/packages/BUILD/reiser4-2.6.35.4/linux-2.6.35 O=/usr/src/packages/BUILD/reiser4-2.6.35.4/linux-obj' + test -e /usr/src/packages/SOURCES/TOLERATE-UNKNOWN-NEW-CONFIG-OPTIONS + cp .config .config.orig + make silentoldconfig -C /usr/src/packages/BUILD/reiser4-2.6.35.4/linux-2.6.35 O=/usr/src/packages/BUILD/reiser4-2.6.35.4/linux-obj make: Entering directory `/usr/src/packages/BUILD/reiser4-2.6.35.4/linux-2.6.35' HOSTCC scripts/basic/fixdep HOSTCC scripts/basic/docproc HOSTCC scripts/basic/hash GEN /usr/src/packages/BUILD/reiser4-2.6.35.4/linux-obj/Makefile HOSTCC scripts/kconfig/conf.o HOSTCC scripts/kconfig/kxgettext.o SHIPPED scripts/kconfig/zconf.tab.c SHIPPED scripts/kconfig/lex.zconf.c SHIPPED scripts/kconfig/zconf.hash.c HOSTCC scripts/kconfig/zconf.tab.o HOSTLD scripts/kconfig/conf scripts/kconfig/conf -s arch/x86/Kconfig * * Restart config... * * * Processor type and features * Tickless System (Dynamic Ticks) (NO_HZ) [Y/n/?] y High Resolution Timer Support (HIGH_RES_TIMERS) [Y/n/?] y Symmetric multi-processing support (SMP) [Y/n/?] y Support x2apic (X86_X2APIC) [Y/n/?] y Support sparse irq numbering (SPARSE_IRQ) [Y/n/?] y Enable MPS table (X86_MPPARSE) [Y/n/?] y Support for extended (non-PC) x86 platforms (X86_EXTENDED_PLATFORM) [Y/n/?] y ScaleMP vSMP (X86_VSMP) [N/y/?] n SGI Ultraviolet (X86_UV) [Y/n/?] y Single-depth WCHAN output (SCHED_OMIT_FRAME_POINTER) [Y/n/?] (NEW) aborted! Console input/output is redirected. Run 'make oldconfig' to update configuration. make[2]: *** [silentoldconfig] Error 1 make[1]: *** [silentoldconfig] Error 2 make: *** [sub-make] Error 2 make: Leaving directory `/usr/src/packages/BUILD/reiser4-2.6.35.4/linux-2.6.35' error: Bad exit status from /var/tmp/rpm-tmp.1hGTxF (%prep) RPM build errors: Bad exit status from /var/tmp/rpm-tmp.1hGTxF (%prep) SysRq : Power Off Power down. [2] full log ->https://build.opensuse.org/package/live_build_log?arch=x86_64&package=reise… [3] project -> https://build.opensuse.org/package/show?package=reiser4&project=home%3Adoig… -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-kernel+help(a)opensuse.org

1 0

[opensuse-kernel] [Kernel:HEAD] 2.6.36-rc2 crashes
by Johannes Obermayr 27 Aug '10

27 Aug '10

Hi, Kernel 2.6.36-rc2 crashes. Johannes [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.36-rc2-3-pae (geeko@buildhost) (gcc version 4.5.0 20100604 [gcc-4_5-branch revision 160292] (SUSE Linux) ) #1 SMP 2010-08-24 20:06:39 +0200 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000003fff0000 (usable) [ 0.000000] BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data) [ 0.000000] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) [ 0.000000] Notice: NX (Execute Disable) protection missing in CPU or disabled in BIOS! [ 0.000000] DMI 2.2 present. [ 0.000000] last_pfn = 0x3fff0 max_arch_pfn = 0x1000000 [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000001000 (reserved) [ 0.000000] modified: 0000000000001000 - 0000000000002000 (usable) [ 0.000000] modified: 0000000000002000 - 0000000000010000 (reserved) [ 0.000000] modified: 0000000000010000 - 000000000009fc00 (usable) [ 0.000000] modified: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 000000003fff0000 (usable) [ 0.000000] modified: 000000003fff0000 - 000000003fff3000 (ACPI NVS) [ 0.000000] modified: 000000003fff3000 - 0000000040000000 (ACPI data) [ 0.000000] modified: 00000000ffff0000 - 0000000100000000 (reserved) [ 0.000000] init_memory_mapping: 0000000000000000-00000000371fe000 [ 0.000000] RAMDISK: 37593000 - 37ff0000 [ 0.000000] Allocated new RAMDISK: 00a3a000 - 01496e0c [ 0.000000] Move RAMDISK from 0000000037593000 - 0000000037fefe0b to 00a3a000 - 01496e0b [ 0.000000] ACPI: RSDP 000f80c0 00014 (v00 VIA694) [ 0.000000] ACPI: RSDT 3fff3000 00028 (v01 VIA694 MSI ACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: FACP 3fff3040 00074 (v01 VIA694 MSI ACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: DSDT 3fff30c0 027A3 (v01 VIA694 AWRDACPI 00001000 MSFT 0100000C) [ 0.000000] ACPI: FACS 3fff0000 00040 [ 0.000000] Node: 0, start_pfn: 0, end_pfn: 3fff0 [ 0.000000] Reserving total of a00 pages for numa KVA remap [ 0.000000] kva_start_pfn ~ 36600 max_low_pfn ~ 371fe [ 0.000000] max_pfn = 3fff0 [ 0.000000] 141MB HIGHMEM available. [ 0.000000] 881MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 371fe000 [ 0.000000] low ram: 0 - 371fe000 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000001 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000371fe [ 0.000000] HighMem 0x000371fe -> 0x0003fff0 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[4] active PFN ranges [ 0.000000] 0: 0x00000001 -> 0x00000002 [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0003f400 [ 0.000000] 0: 0x0003fe00 -> 0x0003fff0 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x4008 [ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs [ 0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic" [ 0.000000] APIC: disable apic facility [ 0.000000] APIC: switched to apic NOOP [ 0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000010000 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:bfff0000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:1 nr_node_ids:8 [ 0.000000] PERCPU: Embedded 13 pages/cpu @c1600000 s31872 r0 d21376 u2097152 [ 0.000000] pcpu-alloc: s31872 r0 d21376 u2097152 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 257408 [ 0.000000] Policy zone: HighMem [ 0.000000] Kernel command line: root=/dev/disk/by-id/ata-IC35L080AVVA07-0_VNC402A4GXUTPG-part2 resume=/dev/disk/by-id/ata-IC35L080AVVA07-0_VNC402A4GXUTPG-part1 splash=silent console=ttyS0,115200n8 console=tty0 [ 0.000000] bootsplash: silent mode. [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Initializing CPU#0 [ 0.000000] Subtract (40 early reservations) [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE [ 0.000000] #2 [0000200000 - 0000a311cc] TEXT DATA BSS [ 0.000000] #3 [000009fc00 - 0000100000] BIOS reserved [ 0.000000] #4 [0000a32000 - 0000a390b6] BRK [ 0.000000] #5 [0000010000 - 0000011000] TRAMPOLINE [ 0.000000] #6 [0000011000 - 0000015000] ACPI WAKEUP [ 0.000000] #7 [0000015000 - 000001c000] PGTABLE [ 0.000000] #8 [0000a3a000 - 0001497000] NEW RAMDISK [ 0.000000] #9 [003f400000 - 003fe00000] KVA RAM [ 0.000000] #10 [0036600000 - 0037000000] KVA PG [ 0.000000] #11 [0001497000 - 0001498000] BOOTMEM [ 0.000000] #12 [0001498000 - 0001498004] BOOTMEM [ 0.000000] #13 [0001498040 - 0001498100] BOOTMEM [ 0.000000] #14 [0001498100 - 00014981a4] BOOTMEM [ 0.000000] #15 [00014981c0 - 000149b1c0] BOOTMEM [ 0.000000] #16 [000149b1c0 - 000149b1dc] BOOTMEM [ 0.000000] #17 [000149b200 - 000149be00] BOOTMEM [ 0.000000] #18 [000149be00 - 000149bf68] BOOTMEM [ 0.000000] #19 [000149bf80 - 000149bfc0] BOOTMEM [ 0.000000] #20 [000149bfc0 - 000149c000] BOOTMEM [ 0.000000] #21 [000149c000 - 000149c040] BOOTMEM [ 0.000000] #22 [000149c040 - 000149c080] BOOTMEM [ 0.000000] #23 [000149c080 - 000149c0c0] BOOTMEM [ 0.000000] #24 [000149c0c0 - 000149c100] BOOTMEM [ 0.000000] #25 [000149c100 - 000149c140] BOOTMEM [ 0.000000] #26 [000149c140 - 000149c150] BOOTMEM [ 0.000000] #27 [000149c180 - 000149c190] BOOTMEM [ 0.000000] #28 [000149c1c0 - 000149c272] BOOTMEM [ 0.000000] #29 [000149c280 - 000149c332] BOOTMEM [ 0.000000] #30 [0001600000 - 000160d000] BOOTMEM [ 0.000000] #31 [000149e340 - 000149e344] BOOTMEM [ 0.000000] #32 [000149e380 - 000149e384] BOOTMEM [ 0.000000] #33 [000149e3c0 - 000149e3c4] BOOTMEM [ 0.000000] #34 [000149e400 - 000149e404] BOOTMEM [ 0.000000] #35 [000149e440 - 000149e4e8] BOOTMEM [ 0.000000] #36 [000149e500 - 000149e568] BOOTMEM [ 0.000000] #37 [000149e580 - 00014a2580] BOOTMEM [ 0.000000] #38 [00014a2580 - 0001522580] BOOTMEM [ 0.000000] #39 [0001522580 - 0001562580] BOOTMEM [ 0.000000] Initializing HighMem for node 0 (000371fe:0003fff0) [ 0.000000] Memory: 1007632k/1048512k available (3956k kernel code, 30192k reserved, 2976k data, 424k init, 135112k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xff5b4000 - 0xfffff000 (10540 kB) [ 0.000000] pkmap : 0xff200000 - 0xff400000 (2048 kB) [ 0.000000] vmalloc : 0xf79fe000 - 0xff1fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf71fe000 ( 881 MB) [ 0.000000] .init : 0xc08c6000 - 0xc0930000 ( 424 kB) [ 0.000000] .data : 0xc05dd161 - 0xc08c54c8 (2976 kB) [ 0.000000] .text : 0xc0200000 - 0xc05dd161 (3956 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] RCU-based detection of stalled CPUs is disabled. [ 0.000000] Verbose stalled-CPUs detection is disabled. [ 0.000000] NR_IRQS:8448 nr_irqs:256 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] console [ttyS0] enabled [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 899.766 MHz processor. [ 0.012015] Calibrating delay loop (skipped), value calculated using timer frequency.. 1799.53 BogoMIPS (lpj=3599064) [ 0.020007] pid_max: default: 32768 minimum: 301 [ 0.024190] Security Framework initialized [ 0.028053] AppArmor: AppArmor initialized [ 0.032165] Mount-cache hash table entries: 512 [ 0.036394] Initializing cgroup subsys ns [ 0.040019] Initializing cgroup subsys cpuacct [ 0.044013] Initializing cgroup subsys memory [ 0.048042] Initializing cgroup subsys devices [ 0.052010] Initializing cgroup subsys freezer [ 0.056007] Initializing cgroup subsys net_cls [ 0.060007] Initializing cgroup subsys blkio [ 0.064106] mce: CPU supports 4 MCE banks [ 0.068058] Performance Events: [ 0.072009] no APIC, boot with the "lapic" boot parameter to force-enable it. [ 0.076005] no hardware sampling interrupt available. [ 0.080005] AMD PMU driver. [ 0.084008] ... version: 0 [ 0.088005] ... bit width: 48 [ 0.092005] ... generic registers: 4 [ 0.096006] ... value mask: 0000ffffffffffff [ 0.100005] ... max period: 00007fffffffffff [ 0.104005] ... fixed-purpose events: 0 [ 0.108005] ... event mask: 000000000000000f [ 0.112122] SMP alternatives: switching to UP code [ 0.130520] Freeing SMP alternatives: 28k freed [ 0.132270] Unpacking initramfs... [ 0.140077] BUG: unable to handle kernel paging request at 00cd8000 [ 0.144000] IP: [<c0267658>] __srcu_read_lock+0x18/0x20 [ 0.144000] *pdpt = 000000000093a001 *pde = 0000000000000000 [ 0.144000] Oops: 0002 [#1] SMP [ 0.144000] last sysfs file: [ 0.144000] Modules linked in: [ 0.144000] [ 0.144000] Pid: 0, comm: swapper Not tainted 2.6.36-rc2-3-pae #1 MS-6330/MS-6330 [ 0.144000] EIP: 0060:[<c0267658>] EFLAGS: 00010206 CPU: 0 [ 0.144000] EIP is at __srcu_read_lock+0x18/0x20 [ 0.144000] EAX: 00000000 EBX: 00000000 ECX: 00000000 EDX: 00cd8000 [ 0.144000] ESI: 00000002 EDI: 00000002 EBP: 00000002 ESP: c0883e38 [ 0.144000] DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068 [ 0.144000] Process swapper (pid: 0, ti=c0882000 task=c0889760 task.ti=c0882000) [ 0.144000] Stack: [ 0.144000] c0344b62 00000000 c02d8123 00000000 00000000 00000001 f5c01894 00000000 [ 0.144000] <0> 00000000 00000002 f5c017e4 f5c017e4 00000000 c0883ec0 00000000 00000000 [ 0.144000] <0> 00000000 00000002 f5c017e4 00000000 c032a948 00000002 00000000 00000000 [ 0.144000] Call Trace: [ 0.144000] [<c0344b62>] fsnotify+0x192/0x290 [ 0.144000] [<c032a948>] notify_change+0x1f8/0x2f0 [ 0.144000] [<c03144e1>] do_truncate+0x61/0x90 [ 0.144000] [<c0314605>] do_sys_ftruncate+0xf5/0x100 [ 0.144000] [<c0314795>] sys_ftruncate+0x25/0x40 [ 0.144000] [<c08c7d6a>] do_name+0x111/0x29c [ 0.144000] [<c08c7721>] write_buffer+0x1a/0x28 [ 0.144000] [<c08c7784>] flush_buffer+0x55/0x6d [ 0.144000] [<c08e98ff>] gunzip+0x2b6/0x35d [ 0.144000] [<c08c8093>] unpack_to_rootfs+0x19e/0x2a8 [ 0.144000] [<c08c827b>] populate_rootfs+0x52/0xee [ 0.144000] [<c08c67ad>] start_kernel+0x335/0x349 [ 0.144000] Code: 8d 76 00 31 d2 e9 c9 ff ff ff 90 90 90 90 90 90 90 90 90 89 c2 8b 00 83 e0 01 8b 52 04 64 8b 0d 50 b0 92 c0 03 14 8d c0 23 8c c0 <83> 04 82 01 c3 8d 76 00 8b 40 04 64 8b 0d 50 b0 92 c0 03 04 8d [ 0.144000] EIP: [<c0267658>] __srcu_read_lock+0x18/0x20 SS:ESP 0068:c0883e38 [ 0.144000] CR2: 0000000000cd8000 [ 0.144026] ---[ end trace 4eaa2a86a8e2da22 ]--- [ 0.148013] Kernel panic - not syncing: Attempted to kill the idle task! [ 0.152009] Pid: 0, comm: swapper Tainted: G D 2.6.36-rc2-3-pae #1 [ 0.156005] Call Trace: [ 0.158550] [<c0206223>] try_stack_unwind+0x173/0x190 [ 0.160016] [<c0204f6f>] dump_trace+0x3f/0xe0 [ 0.164016] [<c020628b>] show_trace_log_lvl+0x4b/0x60 [ 0.168013] [<c02062b8>] show_trace+0x18/0x20 [ 0.172016] [<c05d3cdf>] dump_stack+0x6d/0x72 [ 0.176013] [<c05d3d3b>] panic+0x57/0x14e [ 0.180017] [<c0249c80>] do_exit+0x350/0x370 [ 0.184024] [<c05d75a7>] oops_end+0x87/0xc0 [ 0.188023] [<c022737f>] bad_area_nosemaphore+0xf/0x20 [ 0.192015] [<c05d970b>] do_page_fault+0x37b/0x410 [ 0.196021] [<c05d6ac2>] error_code+0x5a/0x60 [ 0.200014] [<c0267658>] __srcu_read_lock+0x18/0x20 [ 0.204012] [<c0344b62>] fsnotify+0x192/0x290 [ 0.208014] [<c032a948>] notify_change+0x1f8/0x2f0 [ 0.212014] [<c03144e1>] do_truncate+0x61/0x90 [ 0.216013] [<c0314605>] do_sys_ftruncate+0xf5/0x100 [ 0.220013] [<c0314795>] sys_ftruncate+0x25/0x40 [ 0.224012] [<c08c7d6a>] do_name+0x111/0x29c [ 0.228014] [<c08c7721>] write_buffer+0x1a/0x28 [ 0.232012] [<c08c7784>] flush_buffer+0x55/0x6d [ 0.236013] [<c08e98ff>] gunzip+0x2b6/0x35d [ 0.240013] [<c08c8093>] unpack_to_rootfs+0x19e/0x2a8 [ 0.244014] [<c08c827b>] populate_rootfs+0x52/0xee [ 0.248013] [<c08c67ad>] start_kernel+0x335/0x349 -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-kernel+help(a)opensuse.org

3 2

[opensuse-kernel] [OT] PathScale packaging bounty
by "C. Bergström" 24 Aug '10

24 Aug '10

Hi all Apologies for the OT cross post, but I couldn't sort this out and any help is greatly appreciated.. (Others directed me here) PathScale needs some packaging help 1) kernel-trace, kernel-default, kernel-sources , kernel-trace-sources (if they differ) , kernel-trace-sysm (if this needs to be different from, kernel-sysm) I've started a package [1] derived from Kernel:HEAD which gets close to doing what we need, but not quite. The kernel-trace package builds and boots, but I can't manage to get the corresponding kernel-trace-sources to correctly match. 2) pscnv (Built against the kernel-default and kernel-trace from above) http://github.com/pathscale/pscnv (There's existing nouveau packages which could possibly be a good base start.. https://build.opensuse.org/project/repositories?project=home%3Ajobermayr ) Q - Why the hassle and why Kernel:HEAD? A - We're not currently able to backport and test our compiler on the loads of different kernels so want a 2.6.35 kernel that we can get packaged everywhere. (Vanilla would be 2nd choice) Q - What's the benefit? A - The end result once these packages are done will be open source NVIDIA drivers across all the distributions that we can get this kernel package to build for. The kernel-trace packages will allow us to also have an officially supported developer kernel to make it easier for people to get us mmiotraces. Overall we hope it'll allow greater testing and developer interest. Q - What's pscnv? A - http://wiki.github.com/pathscale/pscnv/ Q - How much is the bounty? A - Contact me off list #pathscale - freenode (I'm codestr0m) Best, Christopher [1] https://build.opensuse.org/project/packages?project=home%3Apathscale -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-kernel+help(a)opensuse.org

3 9

[opensuse-kernel] 11.3 kabi issues
by Jeff Mahoney 20 Aug '10

20 Aug '10

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi - I'm preparing the next 11.3 kernel update and working out the details for the kABI. Most of the changes are internal and can be safely ignored. I've worked around a few others that couldn't be, but these last two remain: KABI: symbol simple_fill_super(vmlinux) changed crc from 0x49a93819 to 0x14875b1 9 KABI: symbol usb_buffer_map_sg(vmlinux) lost KABI: symbol usb_buffer_unmap_sg(vmlinux) lost I get the impression that there are no users for the usb functions. Is it safe to ignore those, Greg? The simple_fill_super change I think needs to be reverted. I seems like it was changed for correctness and doesn't actually fix a bug. - -Jeff - -- Jeff Mahoney SUSE Labs -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.15 (GNU/Linux) Comment: Using GnuPG with SUSE - http://enigmail.mozdev.org/ iEYEARECAAYFAkxqv+YACgkQLPWxlyuTD7KT6gCfe5GmiVpVTtnaakSf3cbdBoit RjMAn2NBFS1EwKxGQQKCaDT1+69jfjsh =Y0HW -----END PGP SIGNATURE----- -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-kernel+help(a)opensuse.org

4 11

[opensuse-kernel] building kernel-vanilla with one extra patch.
by doiggl＠velocitynet.com.au 19 Aug '10

19 Aug '10

Hello, I have been wondering if this is possible as I was unsuccessful the past to get a kernel built with the reiser4-for-2.6.35.patch applied. I am now wondering of this would work ?. 1. Set up a home project called <kernel-vanilla> in my-home-location 2. Link it to the sources of the package kernel-source of project Kernel:HEAD - Details <link project='Kernel:HEAD' package='kernel-source' cicount='copy'/> 3. copy in to my-home-location:<kernel-vanilla> the file kernel-vanilla.spec. - I will need to alter it later to add/apply the patch. 4. Add the patch file reiser4-for-2.6.35.patch.bz2 to the project my-home-location<kernel-vanilla> 5. Add/change to lines Add extra line to .spec file Source121: reiser4-for-2.6.35.patch.bz2 Add to end of setup line -a 121 %setup -q -c -T -a 0 -a 100 -a 101 -a 102 -a 103 -a 104 -a 105 -a 106 -a 107 -a 108 -a 109 -a 110 -a 111 -a 112 -a 113 -a 120 5. Use the script apply-patches [1] to apply the patch into the kernel [1] https://build.opensuse.org/package/view_file?file=apply-patches&package=ker… 6. Some how copy in a reiser4 enabled .config file to /usr/src/linux 7. Build the patched kernel. The restrictions are these. - I have to use a vanilla based kernel based on reiser4-for-2.6.35. What are your thoughts on this approach,would it work, if not what method would work ? Ta Glenn -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-kernel+help(a)opensuse.org

2 5

[opensuse-kernel] MMC/SD Card reader on openSUSE 11.3
by Dominique Leuenberger 17 Aug '10

17 Aug '10

Hi everybody, I got a nice nifty notebook here (Dell Precision M4500, smolt profile at [0]), which I'm trying to get the latest 'things' to work. Almost all of the machine is in a working state (on openSUSE 11.3 even all out of the box, exctept gfx) and this is highly impressive. Unfortunately, at this time, the SD/MMC card reader seems not to work. In dmesg output, I get those lines regarding mmc or sdhci: > dmesg | grep -e 'sdhci' -e 'mmc' [ 9.769810] sr0: scsi3-mmc drive: 62x/62x writer dvd-ram cd/rw xa/form2 cdda pop-up [ 9.819200] sdhci: Secure Digital Host Controller Interface driver [ 9.819202] sdhci: Copyright(c) Pierre Ossman [ 9.970889] sdhci-pci 0000:04:00.1: SDHCI controller found [1180:e822] (rev 3) [ 9.970911] sdhci-pci 0000:04:00.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 9.970941] mmc0: Unknown controller version (2). You may experience problems. [ 9.970951] sdhci-pci 0000:04:00.1: setting latency timer to 64 [ 9.970997] Registered led device: mmc0:: [ 9.971029] mmc0: SDHCI controller on PCI [0000:04:00.1] using ADMA [ 1281.335537] mmc0: error -110 whilst initialising SD card So the controller is seen / detected, the insertion of the card is seen as well (last line), but just as it tells earlier, 'I do experience problems' :) The card remains inaccessible of course. Output of lspci -v for the SD host controller: 04:00.1 SD Host controller: Ricoh Co Ltd Device e822 (rev 03) (prog-if 01) Subsystem: Dell Device 040c Flags: bus master, fast devsel, latency 0, IRQ 19 Memory at e5930000 (32-bit, non-prefetchable) [size=256] Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+ Capabilities: [78] Power Management version 3 Capabilities: [80] Express Endpoint, MSI 00 Kernel driver in use: sdhci-pci Is there anyway this can be worked on? Any pointers on getting started with it? Best regards, Dominique [0] http://www.smolts.org/client/show/pub_0504d140-157f-4525-a0b1-6cafea36dbb8 -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-kernel+help(a)opensuse.org

3 8

[opensuse-kernel] combine shell script and .spec file into one .spec file to do the whole job.
by doiggl＠velocitynet.com.au 13 Aug '10

13 Aug '10

Hello, I need help to combine this shell script [1] and .spec file [2]into one .spec file to do the whole job and run from obs. Can someone help at joining the two together and list what the new .spec file would look like. The reason I ask is I can run the script locally and its builds the rpms and I want obs to do the building instead. Here is start when script was run[3] Here is a copy of the make rpm-pkg .spec file[2] Here is a sample log of a successful build with a script [4] I posted on packaging and kernel as this is a but of a mix of both. Thanks for your help Cheers Glenn [1] {shell script this works ok locally} ======================================== version="35" cd /usr/src rm -rf linux-2.6.$version linux cp -v /media/disk/kernel/2.6.$version/final/linux-2.6.$version.tar.bz2 . rm linux-2.6.35.tar bunzip2 -v linux-2.6.$version.tar.bz2 tar -xvf linux-2.6.$version.tar ln -s linux-2.6.$version linux cp -v /boot/config-$(uname -r) /usr/src/linux-2.6.$version/.config cd /usr/src/linux patch -p1 < /patch/reiser4-for-2.6.$version.patch cp -v /source/new.config /usr/src/linux-2.6.35/.config make rpm-pkg | tee reiser4enabledkernel.log [2] {.spec file content part of make rpm-pkg} # cat kernel.spec =============================================================== Name: kernel Summary: The Linux Kernel Version: 2.6.3512desktop Release: 1 License: GPL Group: System Environment/Kernel Vendor: The Linux Community URL: http://www.kernel.org Source: kernel-2.6.3512desktop.tar.gz BuildRoot: %{_tmppath}/%{name}-%{PACKAGE_VERSION}-root Provides: kernel-2.6.35-12-desktop %define __spec_install_post /usr/lib/rpm/brp-compress || : %define debug_package %{nil} %description The Linux Kernel, the operating system core itself %prep %setup -q %build make clean && make %{?_smp_mflags} %install %ifarch ia64 mkdir -p $RPM_BUILD_ROOT/boot/efi $RPM_BUILD_ROOT/lib/modules mkdir -p $RPM_BUILD_ROOT/lib/firmware %else mkdir -p $RPM_BUILD_ROOT/boot $RPM_BUILD_ROOT/lib/modules mkdir -p $RPM_BUILD_ROOT/lib/firmware %endif INSTALL_MOD_PATH=$RPM_BUILD_ROOT make %{_smp_mflags} KBUILD_SRC= modules_install %ifarch ia64 cp $KBUILD_IMAGE $RPM_BUILD_ROOT/boot/efi/vmlinuz-2.6.35-12-desktop ln -s efi/vmlinuz-2.6.35-12-desktop $RPM_BUILD_ROOT/boot/ %else %ifarch ppc64 cp vmlinux arch/powerpc/boot cp arch/powerpc/boot/$KBUILD_IMAGE $RPM_BUILD_ROOT/boot/vmlinuz-2.6.35-12-desktop %else cp $KBUILD_IMAGE $RPM_BUILD_ROOT/boot/vmlinuz-2.6.35-12-desktop %endif %endif cp System.map $RPM_BUILD_ROOT/boot/System.map-2.6.35-12-desktop cp .config $RPM_BUILD_ROOT/boot/config-2.6.35-12-desktop %ifnarch ppc64 cp vmlinux vmlinux.orig bzip2 -9 vmlinux mv vmlinux.bz2 $RPM_BUILD_ROOT/boot/vmlinux-2.6.35-12-desktop.bz2 mv vmlinux.orig vmlinux %endif %clean rm -rf $RPM_BUILD_ROOT %files %defattr (-, root, root) %dir /lib/modules /lib/modules/2.6.35-12-desktop /lib/firmware /boot/* [3] {start when script was run} =============================== /bin/sh /media/disk/src/linux-2.6.35/scripts/package/mkspec > /media/disk/src/linux-2.6.35/kernel.spec make clean set -e; cd ..; ln -sf /media/disk/src/linux-2.6.35 kernel-2.6.3512desktop /bin/sh /media/disk/src/linux-2.6.35/scripts/setlocalversion --save-scmversion set -e; cd ..; tar -cz --exclude SCCS --exclude BitKeeper --exclude .svn --exclude CVS --exclude .pc --exclude .hg --exclude .git -f kernel-2.6.3512desktop.tar.gz kernel-2.6.3512desktop/. set -e; cd ..; rm kernel-2.6.3512desktop rm -f /media/disk/src/linux-2.6.35/.scmversion set -e; \ /bin/sh /media/disk/src/linux-2.6.35/scripts/mkversion > /media/disk/src/linux-2.6.35/.tmp_version set -e; \ mv -f /media/disk/src/linux-2.6.35/.tmp_version /media/disk/src/linux-2.6.35/.version rpmbuild --target x86_64 -ta ../kernel-2.6.3512desktop.tar.gz Building target platforms: x86_64 Building for target x86_64 Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.pNRVVF + umask 022 [4] {content of local compilation} ================================== https://build.opensuse.org/package/view_file?file=reiser4enabledkernel.log&… -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-kernel+help(a)opensuse.org

3 8

[opensuse-kernel] setup command syntax , to unpack to /usr/src directory
by doiggl＠velocitynet.com.au 11 Aug '10

11 Aug '10

What is the syntax with the 'setup' command to unpack linux-2.6.35.1.tar.bz2 to the /usr/src/ location ready for compilation ?. [start of content list] # tar -jtvf linux-2.6.35.1.tar.bz2 | head drwxrwxr-x root/root 0 2010-08-11 04:37 linux-2.6.35.1/ -rw-rw-r-- root/root 936 2010-08-11 04:37 linux-2.6.35.1/.gitignore -rw-rw-r-- root/root 4021 2010-08-11 04:37 linux-2.6.35.1/.mailmap -rw-rw-r-- root/root 18693 2010-08-11 04:37 linux-2.6.35.1/COPYING -rw-rw-r-- root/root 94031 2010-08-11 04:37 linux-2.6.35.1/CREDITS drwxrwxr-x root/root 0 2010-08-11 04:37 linux-2.6.35.1/Documentation/ -rw-rw-r-- root/root 107 2010-08-11 04:37 linux-2.6.35.1/Documentation/.gitignore -rw-rw-r-- root/root 12342 2010-08-11 04:37 linux-2.6.35.1/Documentation/00-INDEX drwxrwxr-x root/root 0 2010-08-11 04:37 linux-2.6.35.1/Documentation/ABI/ -rw-rw-r-- root/root 3427 2010-08-11 04:37 linux-2.6.35.1/Documentation/ABI/README My spec file has the following so far Name: kernel Summary: The Linux Kernel Version: linux-2.6.35.1 Release: 1 License: GPL Group: System Environment/Kernel Vendor: The Linux Community URL: http://www.kernel.org Source: linux-2.6.35.1.tar.bz2 BuildRoot: %{_tmppath}/%{name}-%{PACKAGE_VERSION}-root Provides: linux-2.6.35.1 %define __spec_install_post /usr/lib/rpm/brp-compress || : %define debug_package %{nil} %description The Linux Kernel, the operating system core itself %prep %setup -q Have you got a list of setup examples Thanks for the info Glenn -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-kernel+help(a)opensuse.org

2 1

[opensuse-kernel] mouse and keyboard freeze
by rob koendering 06 Aug '10

06 Aug '10

Hello all opensuse 11.3 kernel 2.6.34 has problems with i8042 wiith the standard elevator=cfq on a x4 cpu the last core nr 3 gets 80000 ot more hits on irq 12 in 1.5 min so that one is choked and all are interupted the mouse and keyboers freeze for 1 to 4 seconds again and again With elevator=noop no hit on irq12 core 3 mouse and keyboard keep working as normal The mouse is a ps/2-mouse keyboard is wired No trouble with the 11.2 kernel what ever the elevator is -- Robert Koendering Willemstad Curacao -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-kernel+help(a)opensuse.org

1 0

[opensuse-kernel] XFS/ext4 temporary data corruption and possible fix
by Jan Kara 05 Aug '10

05 Aug '10

Hi, XFS and ext4 in 11.3 are vulnerable to a possible temporary data corruption when using aio+dio (basically there is a window in which zeros are read back from a file even though AIO write to that location is already reported as completed). The fix is already available upstream but it changes prototype of ->end_io callback and thus it changes KABI. It's impossible to fix the problem without changing the ->end_io callback (more information has to be passed into the callback). For SLES 11 SP1, we'll have a terrible hack so that KABI is preserved but what should we do for 11.3? Do we take KABI issues there seriously enough that it warranties doing the same hack or can we afford to change the KABI? Honza -- Jan Kara <jack(a)suse.cz> SUSE Labs, CR -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-kernel+help(a)opensuse.org

3 5

[opensuse-kernel] Option Icon 401 - strange entrys in dmesg
by Bjørn Lie 05 Aug '10

05 Aug '10

Hi I have a 3g modem from Option that will connect just fine ( using the right apn), but speed when using linux is appaling + i get something like 50 % package loss when pinging isp / google The modem connects in umts mode ( modem has colorcoded what tech its using) Speed/ping is fine when using it on a windows computer on same location so it shouldn't be a issue with the gsm/umts network. Anyone with a clue? (i'm aware this might be the wrong list, so feel free to tell me to go elsewhere.) embla:~ # lsusb -vv -d 0af0:7401 Bus 001 Device 010: ID 0af0:7401 Option Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 255 Vendor Specific Class bDeviceSubClass 255 Vendor Specific Subclass bDeviceProtocol 255 Vendor Specific Protocol bMaxPacketSize0 64 idVendor 0x0af0 Option idProduct 0x7401 bcdDevice 0.00 iManufacturer 2 Option N.V. iProduct 1 Option Configuration iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 154 bNumInterfaces 6 bConfigurationValue 1 iConfiguration 1 Option Configuration bmAttributes 0xa0 (Bus Powered) Remote Wakeup MaxPower 500mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 255 Vendor Specific Subclass bInterfaceProtocol 255 Vendor Specific Protocol iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 32 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x01 EP 1 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 32 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 255 Vendor Specific Subclass bInterfaceProtocol 255 Vendor Specific Protocol iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 32 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 32 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 2 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 255 Vendor Specific Subclass bInterfaceProtocol 255 Vendor Specific Protocol iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x83 EP 3 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 32 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x03 EP 3 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 32 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 3 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 255 Vendor Specific Subclass bInterfaceProtocol 255 Vendor Specific Protocol iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x84 EP 4 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 32 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x04 EP 4 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 32 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 4 bAlternateSetting 0 bNumEndpoints 3 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 255 Vendor Specific Subclass bInterfaceProtocol 255 Vendor Specific Protocol iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x85 EP 5 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 5 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x86 EP 6 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 32 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x05 EP 5 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 32 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 5 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 8 Mass Storage bInterfaceSubClass 6 SCSI bInterfaceProtocol 80 Bulk (Zip) iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x06 EP 6 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 1 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x87 EP 7 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 1 Device Qualifier (for other device speed): bLength 10 bDescriptorType 6 bcdUSB 2.00 bDeviceClass 255 Vendor Specific Class bDeviceSubClass 255 Vendor Specific Subclass bDeviceProtocol 255 Vendor Specific Protocol bMaxPacketSize0 64 bNumConfigurations 1 Device Status: 0x0000 (Bus Powered) Here is the log from dmesg [ 7675.534527] usb 1-1.6: USB disconnect, address 5 [ 7684.829429] usb 1-1.6: new high speed USB device using ehci_hcd and address 7 [ 7684.916293] usb 1-1.6: New USB device found, idVendor=0af0, idProduct=7401 [ 7684.916298] usb 1-1.6: New USB device strings: Mfr=3, Product=2, SerialNumber=4 [ 7684.916303] usb 1-1.6: Product: Globetrotter HSUPA Modem [ 7684.916306] usb 1-1.6: Manufacturer: Option N.V. [ 7684.916308] usb 1-1.6: SerialNumber: Serial Number [ 7684.918881] scsi18 : usb-storage 1-1.6:1.0 [ 7685.676537] usb 1-1.6: USB disconnect, address 7 [ 7685.853314] usb 1-1.6: new high speed USB device using ehci_hcd and address 8 [ 7685.950177] usb 1-1.6: New USB device found, idVendor=0af0, idProduct=7401 [ 7685.950183] usb 1-1.6: New USB device strings: Mfr=2, Product=1, SerialNumber=0 [ 7685.950187] usb 1-1.6: Product: Option Configuration [ 7685.950190] usb 1-1.6: Manufacturer: Option N.V. [ 7685.964034] hso0: Disabled Privacy Extensions [ 7685.967028] scsi24 : usb-storage 1-1.6:1.5 [ 7685.990130] usb 1-1.6: hso received invalid serial state notification [ 7686.970222] scsi 24:0:0:0: Direct-Access SD HSUPA Modem PQ: 0 ANSI: 2 [ 7686.970498] sd 24:0:0:0: Attached scsi generic sg7 type 0 [ 7686.976229] sd 24:0:0:0: [sdg] Attached SCSI removable disk [ 7711.740415] net hso0: Invalid frame (24576) length [ 7711.741914] net hso0: Invalid frame (0) length [ 7713.070197] net hso0: Invalid frame (0) length [ 7713.370199] net hso0: Invalid frame (0) length [ 7713.400446] net hso0: Invalid frame (0) length [ 7713.660948] net hso0: Invalid frame (15407) length [ 7713.950438] net hso0: Invalid frame (0) length [ 7714.370583] net hso0: Invalid frame (15650) length [ 7715.290203] net hso0: Invalid frame (27745) length [ 7716.330356] net hso0: Invalid frame (26228) length [ 7717.704253] usb 1-1.5: reset high speed USB device using ehci_hcd and address 6 [ 7718.129999] net hso0: Invalid frame (17740) length [ 7724.336955] sd 17:0:0:0: [sdf] 7729152 512-byte logical blocks: (3.95 GB/3.68 GiB) [ 7724.338955] sd 17:0:0:0: [sdf] Assuming drive cache: write through [ 7724.344949] sd 17:0:0:0: [sdf] Assuming drive cache: write through [ 7724.344955] sdf: sdf1 [ 7758.448904] net hso0: Invalid frame (46080) length [ 7763.728455] net hso0: Invalid frame (65535) length [ 7767.008227] net hso0: Invalid frame (0) length [ 7779.007976] net hso0: Invalid frame (3072) length [ 7789.597456] net hso0: Invalid frame (49204) length [ 7789.737580] net hso0: Invalid frame (14976) length [ 7790.847474] net hso0: Invalid frame (65535) length [ 7795.857392] net hso0: Invalid frame (34267) length [ 7801.857218] net hso0: Invalid frame (5) length [ 7803.857099] net hso0: Invalid frame (5) length [ 7805.867005] net hso0: Invalid frame (5) length [ 7807.867022] net hso0: Invalid frame (5) length [ 7809.867041] net hso0: Invalid frame (5) length [ 7811.866926] net hso0: Invalid frame (5) length [ 7813.866836] net hso0: Invalid frame (5) length [ 7817.296607] net hso0: Invalid frame (4) length [ 7817.926489] net hso0: Invalid frame (21760) length [ 7819.046764] net hso0: Invalid frame (29808) length [ 7824.066656] net hso0: Invalid frame (65280) length [ 7829.046350] net hso0: Invalid frame (9767) length [ 7835.066051] net hso0: Invalid frame (29808) length [ 7837.066064] net hso0: Invalid frame (0) length [ 7839.065840] net hso0: Invalid frame (0) length [ 7841.065986] net hso0: Invalid frame (0) length [ 7891.573985] net hso0: Invalid frame (0) length [ 7947.432298] net hso0: Invalid frame (46080) length [ 7952.111844] net hso0: Invalid frame (3849) length [ 7955.442253] net hso0: Invalid frame (0) length [ 7955.443889] net hso0: Invalid frame (0) length [ 7956.901768] net hso0: Invalid frame (4866) length [ 7958.091791] net hso0: Invalid frame (24400) length [ 7993.420643] net hso0: Invalid frame (53714) length [ 8001.200234] net hso0: Invalid frame (14385) length [ 8006.160516] net hso0: Invalid frame (0) length [ 8006.280122] net hso0: Invalid frame (1) length [ 8011.179955] net hso0: Invalid frame (17253) length [ 8011.429959] net hso0: Invalid frame (15) length [ 8011.929834] net hso0: Invalid frame (0) length [ 8011.990800] net hso0: Invalid frame (20481) length [ 8012.130088] net hso0: Invalid frame (25455) length [ 8012.710225] net hso0: Invalid frame (4616) length [ 8013.329977] net hso0: Invalid frame (40952) length [ 8014.309857] net hso0: Invalid frame (47014) length [ 8014.320226] net hso0: Invalid frame (63235) length [ 8014.370082] net hso0: Invalid frame (14040) length [ 8014.371821] net hso0: Invalid frame (0) length [ 8014.420109] net hso0: Invalid frame (0) length [ 8014.829731] net hso0: Invalid frame (1) length [ 8015.609866] net hso0: Invalid frame (12340) length [ 8016.169740] net hso0: Invalid frame (58223) length [ 8018.169764] net hso0: Invalid frame (47644) length [ 8019.320035] net hso0: Invalid frame (2058) length [ 8019.329784] net hso0: Invalid frame (14040) length [ 8019.359660] net hso0: Invalid frame (42496) length [ 8019.549773] net hso0: Invalid frame (0) length [ 8021.229553] net hso0: Invalid frame (1) length [ 8023.479576] net hso0: Invalid frame (1) length [ 8024.319836] net hso0: Invalid frame (33476) length [ 8024.429587] net hso0: Invalid frame (55535) length [ 8024.549453] net hso0: Invalid frame (12800) length [ 8024.639810] net hso0: Invalid frame (5) length [ 8024.799713] net hso0: Invalid frame (0) length [ 8024.849585] net hso0: Invalid frame (28519) length [ 8025.019462] net hso0: Invalid frame (1) length [ 8025.049704] net hso0: Invalid frame (1) length [ 8025.179464] net hso0: Invalid frame (57879) length [ 8025.209579] net hso0: Invalid frame (57879) length [ 8025.379466] net hso0: Invalid frame (7792) length [ 8025.459463] net hso0: Invalid frame (21584) length [ 8025.619815] net hso0: Invalid frame (28934) length [ 8025.649335] net hso0: Invalid frame (25319) length [ 8025.829474] net hso0: Invalid frame (21584) length [ 8025.889474] net hso0: Invalid frame (31101) length [ 8026.179598] net hso0: Invalid frame (54280) length [ 8026.429608] net hso0: Invalid frame (40065) length [ 8026.769861] net hso0: Invalid frame (59079) length [ 8026.819611] net hso0: Invalid frame (0) length [ 8027.019362] net hso0: Invalid frame (1) length [ 8027.089368] net hso0: Invalid frame (50823) length [ 8027.109976] net hso0: Invalid frame (27706) length [ 8027.360113] net hso0: Invalid frame (27706) length [ 8027.629363] net hso0: Invalid frame (20481) length [ 8027.679993] net hso0: Invalid frame (20481) length [ 8027.840122] net hso0: Invalid frame (25455) length [ 8027.841745] net hso0: Invalid frame (4616) length [ 8027.979749] net hso0: Invalid frame (8241) length [ 8028.260218] net hso0: Invalid frame (4616) length [ 8028.950753] net hso0: Invalid frame (40727) length [ 8028.952122] net hso0: Invalid frame (0) length [ 8029.269262] net hso0: Invalid frame (64468) length [ 8029.329247] net hso0: Invalid frame (53677) length [ 8029.459262] net hso0: Invalid frame (5773) length [ 8029.710251] net hso0: Invalid frame (42392) length [ 8029.711504] net hso0: Invalid frame (24832) length [ 8030.139267] net hso0: Invalid frame (29797) length [ 8033.799054] net hso0: Invalid frame (3072) length [ 8034.009171] net hso0: Invalid frame (58537) length [ 8034.549178] net hso0: Invalid frame (20864) length [ 8034.779054] net hso0: Invalid frame (18688) length [ 8036.029198] net hso0: Invalid frame (43837) length [ 8036.559087] net hso0: Invalid frame (51511) length [ 8038.878985] net hso0: Invalid frame (25974) length [ 8039.448983] net hso0: Invalid frame (29490) length [ 8039.558863] net hso0: Invalid frame (25970) length [ 8039.768980] net hso0: Invalid frame (32768) length [ 8039.868980] net hso0: Invalid frame (19069) length [ 8040.838864] net hso0: Invalid frame (55535) length [ 8044.229039] net hso0: Invalid frame (17784) length [ 8044.358774] net hso0: Invalid frame (26682) length [ 8044.669041] net hso0: Invalid frame (26400) length [ 8044.788916] net hso0: Invalid frame (4096) length [ 8044.790285] net hso0: Invalid frame (29295) length [ 8045.798805] net hso0: Invalid frame (22605) length [ 8046.558925] net hso0: Invalid frame (3) length [ 8049.488579] net hso0: Invalid frame (26682) length [ 8049.798842] net hso0: Invalid frame (26992) length [ 8050.008716] net hso0: Invalid frame (2048) length [ 8050.808731] net hso0: Invalid frame (44368) length [ 8051.388731] net hso0: Invalid frame (14116) length [ 8051.568613] net hso0: Invalid frame (11520) length [ 8054.488491] net hso0: Invalid frame (26682) length [ 8054.918383] net hso0: Invalid frame (21293) length [ 8055.128399] net hso0: Invalid frame (25701) length [ 8055.798405] net hso0: Invalid frame (11617) length [ 8056.458412] net hso0: Invalid frame (28352) length [ 8059.348567] net hso0: Invalid frame (49305) length [ 8059.808302] net hso0: Invalid frame (1) length [ 8060.128308] net hso0: Invalid frame (25701) length [ 8060.768455] net hso0: Invalid frame (26304) length [ 8061.448321] net hso0: Invalid frame (19069) length [ 8061.578456] net hso0: Invalid frame (58659) length [ 8064.458104] net hso0: Invalid frame (4) length [ 8064.917982] net hso0: Invalid frame (1) length [ 8065.028106] net hso0: Invalid frame (34682) length [ 8066.058010] net hso0: Invalid frame (28519) length [ 8066.438502] net hso0: Invalid frame (24951) length [ 8066.488122] net hso0: Invalid frame (4616) length [ 8066.548376] net hso0: Invalid frame (6223) length [ 8066.549874] net hso0: Invalid frame (25047) length [ 8066.558619] net hso0: Invalid frame (0) length [ 8066.577996] net hso0: Invalid frame (0) length [ 8066.658012] net hso0: Invalid frame (0) length [ 8066.708125] net hso0: Invalid frame (4616) length [ 8066.798252] net hso0: Invalid frame (26996) length [ 8066.808382] net hso0: Invalid frame (4221) length [ 8066.819136] net hso0: Invalid frame (0) length [ 8066.820512] net hso0: Invalid frame (0) length [ 8067.068381] net hso0: Invalid frame (0) length [ 8067.078876] net hso0: Invalid frame (20481) length [ 8067.298005] net hso0: Invalid frame (54436) length [ 8067.678529] net hso0: Invalid frame (4616) length [ 8067.808138] net hso0: Invalid frame (24832) length [ 8068.298282] net hso0: Invalid frame (4616) length [ 8068.318032] net hso0: Invalid frame (20481) length [ 8069.358045] net hso0: Invalid frame (27826) length [ 8069.557915] net hso0: Invalid frame (20481) length [ 8069.668265] net hso0: Invalid frame (11825) length [ 8069.688521] net hso0: Invalid frame (26178) length [ 8069.698417] net hso0: Invalid frame (0) length [ 8069.698660] net hso0: Invalid frame (52460) length [ 8069.717912] net hso0: Invalid frame (19213) length [ 8069.818176] net hso0: Invalid frame (0) length [ 8069.828029] net hso0: Invalid frame (28276) length [ 8069.927916] net hso0: Invalid frame (29741) length [ 8069.948289] net hso0: Invalid frame (4616) length [ 8069.958421] net hso0: Invalid frame (24832) length [ 8069.978420] net hso0: Invalid frame (15621) length [ 8069.988160] net hso0: Invalid frame (0) length [ 8070.177909] net hso0: Invalid frame (16886) length [ 8070.238173] net hso0: Invalid frame (0) length [ 8070.317926] net hso0: Invalid frame (24932) length [ 8070.488176] net hso0: Invalid frame (8304) length [ 8070.748307] net hso0: Invalid frame (19213) length [ 8070.838167] net hso0: Invalid frame (4382) length [ 8071.267922] net hso0: Invalid frame (20481) length [ 8071.488190] net hso0: Invalid frame (15648) length [ 8071.698066] net hso0: Invalid frame (17263) length [ 8072.988083] net hso0: Invalid frame (10356) length [ 8073.847938] net hso0: Invalid frame (31224) length [ 8073.878051] net hso0: Invalid frame (6683) length [ 8074.228454] net hso0: Invalid frame (6683) length [ 8074.238076] net hso0: Invalid frame (0) length [ 8074.249198] net hso0: Invalid frame (24832) length [ 8074.277716] net hso0: Invalid frame (15510) length [ 8074.357845] net hso0: Invalid frame (0) length [ 8074.778222] net hso0: Invalid frame (15510) length [ 8074.937719] net hso0: Invalid frame (57290) length [ 8075.298098] net hso0: Invalid frame (39608) length [ 8075.637845] net hso0: Invalid frame (0) length [ 8075.988110] net hso0: Invalid frame (0) length [ 8076.187987] net hso0: Invalid frame (35074) length [ 8076.887867] net hso0: Invalid frame (33831) length [ 8077.307747] net hso0: Invalid frame (29281) length [ 8077.497995] net hso0: Invalid frame (0) length [ 8077.768001] net hso0: Invalid frame (35329) length [ 8078.277846] net hso0: Invalid frame (0) length [ 8078.777610] net hso0: Invalid frame (29285) length [ 8079.078142] net hso0: Invalid frame (6683) length [ 8079.079762] net hso0: Invalid frame (8482) length [ 8079.397633] net hso0: Invalid frame (0) length [ 8079.847647] net hso0: Invalid frame (0) length [ 8080.057777] net hso0: Invalid frame (3599) length [ 8080.157899] net hso0: Invalid frame (12592) length [ 8080.327453] net hso0: Invalid frame (13781) length [ 8080.578140] net hso0: Invalid frame (8260) length [ 8080.718279] net hso0: Invalid frame (46080) length [ 8080.727906] net hso0: Invalid frame (15510) length [ 8081.017907] net hso0: Invalid frame (35329) length [ 8081.557542] net hso0: Invalid frame (15510) length [ 8081.657539] net hso0: Invalid frame (15510) length [ 8082.148515] net hso0: Invalid frame (29281) length [ 8082.408517] net hso0: Invalid frame (0) length [ 8083.007794] net hso0: Invalid frame (15510) length [ 8083.278428] net hso0: Invalid frame (15510) length [ 8084.267816] net hso0: Invalid frame (46336) length [ 8084.507447] net hso0: Invalid frame (27753) length [ 8084.727786] net hso0: Invalid frame (28515) length [ 8085.057449] net hso0: Invalid frame (59394) length [ 8085.387569] net hso0: Invalid frame (3853) length [ 8087.427599] net hso0: Invalid frame (14880) length [ 8088.177609] net hso0: Invalid frame (35329) length [ 8088.457351] net hso0: Invalid frame (15510) length [ 8089.367235] net hso0: Invalid frame (36581) length [ 8089.407241] net hso0: Invalid frame (26991) length [ 8090.157378] net hso0: Invalid frame (2085) length [ 8090.257240] net hso0: Invalid frame (36581) length [ 8090.427257] net hso0: Invalid frame (25971) length [ 8090.627382] net hso0: Invalid frame (2058) length [ 8091.027124] net hso0: Invalid frame (36581) length [ 8091.867649] net hso0: Invalid frame (63384) length [ 8091.957147] net hso0: Invalid frame (36581) length [ 8093.847131] net hso0: Invalid frame (11520) length [ 8094.487042] net hso0: Invalid frame (17297) length [ 8094.847178] net hso0: Invalid frame (35329) length [ 8095.047177] net hso0: Invalid frame (30583) length [ 8095.317043] net hso0: Invalid frame (15510) length [ 8095.467432] net hso0: Invalid frame (25693) length [ 8095.487048] net hso0: Invalid frame (25965) length [ 8095.807299] net hso0: Invalid frame (30583) length [ 8096.846943] net hso0: Invalid frame (28277) length [ 8098.846963] net hso0: Invalid frame (28277) length [ 8099.376970] net hso0: Invalid frame (31498) length [ 8099.386956] net hso0: Invalid frame (3432) length [ 8099.396963] net hso0: Invalid frame (0) length [ 8099.406955] net hso0: Invalid frame (26735) length [ 8099.408330] net hso0: Invalid frame (38394) length [ 8099.637705] net hso0: Invalid frame (0) length [ 8099.638939] net hso0: Invalid frame (26990) length [ 8100.056855] net hso0: Invalid frame (3844) length [ 8100.466969] net hso0: Invalid frame (48969) length [ 8100.726732] net hso0: Invalid frame (28190) length [ 8101.846734] net hso0: Invalid frame (3844) length [ 8102.396874] net hso0: Invalid frame (0) length [ 8102.657379] net hso0: Invalid frame (2807) length [ 8102.658971] net hso0: Invalid frame (35329) length [ 8102.717468] net hso0: Invalid frame (10099) length [ 8102.719097] net hso0: Invalid frame (3779) length [ 8102.807751] net hso0: Invalid frame (0) length [ 8102.957499] net hso0: Invalid frame (12593) length [ 8102.967380] net hso0: Invalid frame (25965) length [ 8102.969004] net hso0: Invalid frame (31092) length [ 8103.217259] net hso0: Invalid frame (59334) length [ 8103.457355] net hso0: Invalid frame (0) length [ 8103.467503] net hso0: Invalid frame (15510) length [ 8103.468623] net hso0: Invalid frame (9544) length [ 8103.758380] net hso0: Invalid frame (19213) length [ 8103.759973] net hso0: Invalid frame (0) length [ 8103.806983] net hso0: Invalid frame (0) length [ 8103.897142] net hso0: Invalid frame (0) length [ 8104.027011] net hso0: Invalid frame (0) length [ 8104.277391] net hso0: Invalid frame (26141) length [ 8104.289515] net hso0: Invalid frame (35329) length [ 8104.376863] net hso0: Invalid frame (0) length [ 8104.467017] net hso0: Invalid frame (10506) length [ 8104.616861] net hso0: Invalid frame (53057) length [ 8104.846778] net hso0: Invalid frame (24946) length [ 8104.887136] net hso0: Invalid frame (47022) length [ 8104.987137] net hso0: Invalid frame (25965) length [ 8104.988520] net hso0: Invalid frame (0) length [ 8105.206779] net hso0: Invalid frame (1539) length [ 8105.457028] net hso0: Invalid frame (2831) length [ 8105.706909] net hso0: Invalid frame (35329) length [ 8105.866788] net hso0: Invalid frame (35329) length [ 8105.957159] net hso0: Invalid frame (0) length [ 8106.026662] net hso0: Invalid frame (30751) length [ 8106.456667] net hso0: Invalid frame (0) length [ 8107.206788] net hso0: Invalid frame (1736) length [ 8107.476539] net hso0: Invalid frame (25965) length [ 8107.606541] net hso0: Invalid frame (31038) length [ 8107.676554] net hso0: Invalid frame (19213) length [ 8107.726676] net hso0: Invalid frame (28475) length [ 8107.887047] net hso0: Invalid frame (11426) length [ 8107.896918] net hso0: Invalid frame (2058) length [ 8107.907305] net hso0: Invalid frame (15975) length [ 8108.427063] net hso0: Invalid frame (0) length [ 8108.736561] net hso0: Invalid frame (0) length [ 8108.886934] net hso0: Invalid frame (10402) length [ 8109.246822] net hso0: Invalid frame (42267) length [ 8109.356696] net hso0: Invalid frame (35329) length [ 8109.516544] net hso0: Invalid frame (10402) length [ 8109.586558] net hso0: Invalid frame (15510) length [ 8109.856439] net hso0: Invalid frame (11569) length [ 8110.066440] net hso0: Invalid frame (8292) length [ 8110.496423] net hso0: Invalid frame (26990) length [ 8110.756447] net hso0: Invalid frame (25460) length [ 8110.896710] net hso0: Invalid frame (29302) length [ 8111.886471] net hso0: Invalid frame (49177) length [ 8112.376962] net hso0: Invalid frame (48478) length [ 8112.747198] net hso0: Invalid frame (6683) length [ 8112.748821] net hso0: Invalid frame (15975) length [ 8113.796866] net hso0: Invalid frame (0) length [ 8113.856492] net hso0: Invalid frame (2600) length [ 8114.126987] net hso0: Invalid frame (24832) length [ 8114.526734] net hso0: Invalid frame (25600) length [ 8114.856497] net hso0: Invalid frame (13626) length [ 8115.106366] net hso0: Invalid frame (0) length [ 8115.336507] net hso0: Invalid frame (15574) length [ 8115.626246] net hso0: Invalid frame (0) length [ 8115.856887] net hso0: Invalid frame (0) length [ 8116.066764] net hso0: Invalid frame (30208) length [ 8116.616395] net hso0: Invalid frame (54591) length [ 8116.856237] net hso0: Invalid frame (0) length [ 8117.066527] net hso0: Invalid frame (51256) length [ 8117.166648] net hso0: Invalid frame (10485) length [ 8117.416888] net hso0: Invalid frame (17263) length [ 8117.486277] net hso0: Invalid frame (48276) length [ 8117.856269] net hso0: Invalid frame (51256) length [ 8117.926533] net hso0: Invalid frame (18526) length [ 8119.406294] net hso0: Invalid frame (9986) length [ 8120.296560] net hso0: Invalid frame (17387) length [ 8120.336305] net hso0: Invalid frame (20871) length [ 8120.596180] net hso0: Invalid frame (22733) length [ 8120.736433] net hso0: Invalid frame (63651) length [ 8120.846049] net hso0: Invalid frame (30583) length [ 8121.856320] net hso0: Invalid frame (25701) length [ 8122.376073] net hso0: Invalid frame (30583) length [ 8123.856082] net hso0: Invalid frame (29285) length [ 8124.816466] net hso0: Invalid frame (11604) length [ 8125.375948] net hso0: Invalid frame (6535) length [ 8129.396024] net hso0: Invalid frame (1) length [ 8129.665901] net hso0: Invalid frame (49048) length [ 8130.306407] net hso0: Invalid frame (0) length [ 8130.475897] net hso0: Invalid frame (0) length [ 8130.645911] net hso0: Invalid frame (0) length [ 8132.385791] net hso0: Invalid frame (0) length [ 8134.565826] net hso0: Invalid frame (0) length [ 8135.355945] net hso0: Invalid frame (0) length [ 8135.826084] net hso0: Invalid frame (0) length [ 8137.025972] net hso0: Invalid frame (13658) length [ 8137.286087] net hso0: Invalid frame (0) length [ 8137.415605] net hso0: Invalid frame (0) length [ 8139.406121] net hso0: Invalid frame (18529) length [ 8140.465515] net hso0: Invalid frame (28169) length [ 8140.675502] net hso0: Invalid frame (12074) length [ 8142.395781] net hso0: Invalid frame (25641) length [ 8144.525422] net hso0: Invalid frame (25711) length [ 8145.465311] net hso0: Invalid frame (26368) length [ 8145.656056] net hso0: Invalid frame (36125) length [ 8147.505331] net hso0: Invalid frame (25641) length [ 8148.975724] net hso0: Invalid frame (51256) length [ 8149.415225] net hso0: Invalid frame (0) length [ 8150.565862] net hso0: Invalid frame (0) length [ 8150.645112] net hso0: Invalid frame (0) length [ 8150.675235] net hso0: Invalid frame (41977) length [ 8150.685111] net hso0: Invalid frame (0) length [ 8151.065104] net hso0: Invalid frame (0) length [ 8151.115115] net hso0: Invalid frame (0) length [ 8151.325481] net hso0: Invalid frame (3594) length [ 8153.238102] usb 1-1.6: USB disconnect, address 8 -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-kernel+help(a)opensuse.org

2 2

[opensuse-kernel] Is OBS/RPM silly regarding KMP packages?
by Johannes Obermayr 05 Aug '10

05 Aug '10

Hi, Why does OBS create "Supplements: packageand(kernel-default:ndiswrapper)" and "Requires: kernel(default:...) for desktop and default flavors? (see home:jobermayr/ndiswrapper) When I set "Supplements: packageand(kernel-%1:ndiswrapper)" in preamble file building finishes successfully. But wrong packageand(...) and Requires: stay ... Can it be a problem in ndiswrapper source code? Thanks. Johannes (Please CC me ...) Related log: installing module-init-tools-3.12-1.3 installing kernel-syms-2.6.35-rc6.16.1 Processing files: ndiswrapper-kmp-default-1.56_k2.6.35.0_rc6_16-22.1.x86_64 Requires: kernel(default:kernel) = dda99a81995bffd8 kernel(default:net_core) = 41f540cca6ceb4cd kernel(default:vmlinux) = 7fa12c0072f8c5ac kernel(default:drivers_usb_core) = f90f111ed788844a kernel(default:kernel_time) = 205d55126ee1de43 kernel(default:drivers_pci) = 52ab372d6021e369 kernel(default:arch_x86_kernel) = 78cc3ecbcbfb55fa kernel(default:net_wireless) = 6b7f9cf458efe6e1 kernel(default:drivers_char) = f966e4aae4f6605a kernel(default:mm) = a154a893d9dc9d7f kernel(default:kernel_irq) = a041efe93122b2d2 kernel(default:arch_x86_mm) = cceb4b911e96ee0e kernel(default:drivers_base) = b0615a5955bb70f3 kernel(default:arch_x86_kernel_cpu) = 8c555816d7ad92c3 kernel(default:lib) = c51024e71937bc7e kernel(default:fs_proc) = 72c8511ff4fe3ff7 kernel(default:net_sched) = 89b4782fb2dc6530 kernel(default:net_ethernet) = 5bc8b42bfeec2cdc kernel(default:init) = e562684880afcc53 Enhances: kernel-default Supplements: packageand(kernel-default:ndiswrapper) Processing files: ndiswrapper-kmp-desktop-1.56_k2.6.35.0_rc6_16-22.1.x86_64 Requires: kernel(default:kernel) = dda99a81995bffd8 kernel(default:net_core) = 41f540cca6ceb4cd kernel(default:vmlinux) = 7fa12c0072f8c5ac kernel(default:drivers_usb_core) = f90f111ed788844a kernel(default:kernel_time) = 205d55126ee1de43 kernel(default:drivers_pci) = 52ab372d6021e369 kernel(default:arch_x86_kernel) = 78cc3ecbcbfb55fa kernel(default:net_wireless) = 6b7f9cf458efe6e1 kernel(default:drivers_char) = f966e4aae4f6605a kernel(default:mm) = a154a893d9dc9d7f kernel(default:kernel_irq) = a041efe93122b2d2 kernel(default:arch_x86_mm) = cceb4b911e96ee0e kernel(default:drivers_base) = b0615a5955bb70f3 kernel(default:arch_x86_kernel_cpu) = 8c555816d7ad92c3 kernel(default:lib) = c51024e71937bc7e kernel(default:fs_proc) = 72c8511ff4fe3ff7 kernel(default:net_sched) = 89b4782fb2dc6530 kernel(default:net_ethernet) = 5bc8b42bfeec2cdc kernel(default:init) = e562684880afcc53 Enhances: kernel-desktop Supplements: packageand(kernel-default:ndiswrapper) Processing files: ndiswrapper-kmp-xen-1.56_k2.6.35.0_rc6_16-22.1.x86_64 Requires: kernel(default:kernel) = dda99a81995bffd8 kernel(default:net_core) = 41f540cca6ceb4cd kernel(default:vmlinux) = 7fa12c0072f8c5ac kernel(default:drivers_usb_core) = f90f111ed788844a kernel(default:kernel_time) = 205d55126ee1de43 kernel(default:drivers_pci) = 52ab372d6021e369 kernel(default:arch_x86_kernel) = 78cc3ecbcbfb55fa kernel(default:net_wireless) = 6b7f9cf458efe6e1 kernel(default:drivers_char) = f966e4aae4f6605a kernel(default:mm) = a154a893d9dc9d7f kernel(default:kernel_irq) = a041efe93122b2d2 kernel(default:arch_x86_mm) = cceb4b911e96ee0e kernel(default:drivers_base) = b0615a5955bb70f3 kernel(default:arch_x86_kernel_cpu) = 8c555816d7ad92c3 kernel(default:lib) = c51024e71937bc7e kernel(default:fs_proc) = 72c8511ff4fe3ff7 kernel(default:net_sched) = 89b4782fb2dc6530 kernel(default:net_ethernet) = 5bc8b42bfeec2cdc kernel(default:init) = e562684880afcc53 Enhances: kernel-xen Supplements: packageand(kernel-default:ndiswrapper) ndiswrapper-kmp-desktop.x86_64: E: suse-policy-kmp-missing-supplements (Badness: 10000) ndiswrapper-kmp-xen.x86_64: E: suse-policy-kmp-missing-supplements (Badness: 10000) make sure that your buildrequires includes kernel-syms and module-init-tools for proper dependencies to be built. ndiswrapper-kmp-desktop.x86_64: W: suse-policy-kmp-excessive-supplements packageand(kernel-default:ndiswrapper) ndiswrapper-kmp-xen.x86_64: W: suse-policy-kmp-excessive-supplements packageand(kernel-default:ndiswrapper) -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-kernel+help(a)opensuse.org

2 1

[opensuse-kernel] building a vanilla 2.6.34.x kernel that will be patched with reiser4-for-2.6.34
by doiggl＠velocitynet.com.au 02 Aug '10

02 Aug '10

Hello I am trying to compile a vanilla 2.6.34.x kernel that will be patched with reiser4-for-2.6.34.patch.bz2 and use obs to to compile it to generate a .rpm of the kernel which has reiser4 enabled and I need some assistance. Here is some history so which got me this point [1] > The patches in the kernel-source package are packaged in the patches.xx.tar.bz2 tarballs, the order in which they are applied is > controlled by the series.conf file. There is a special tarball called patches.addon.tar.bz2 and this is where you put patch. > Create a tarballlike this: > $ tar tf patches.addon.tar.bz2 patches.addon/foobar.patch patches.addon/series where the series file contains this line: patches.addon/foobar.patch > And add it to your kernel-source package. If you need to apply more patches, simply list them all in the series file, in the order you want to apply them. So far I have done the following - 1. created patches.addon/series file # echo patches.addon/reiser4-for-2.6.34.patch > patches.addon/series 2. created patches.addon.tar.bz2 # tar -cvf patches.addon.tar patches.addon patches.addon/ patches.addon/series patches.addon/reiser4-for-2.6.34.patch # bzip2 -v patches.addon.tar patches.addon.tar: 5.330:1, 1.501 bits/byte, 81.24% saved, 2406400 in, 451444 out. Remaining items How do i set up a project to link to the 2.6.34 kernel vanilla. 3. Have you a .spec file I could use to do the following items. - unpack the vanilla 2.6.34 kernel - apply the reiser4-for-2.6.34.patch to the vanilla kernel - build the new reiser4 patched/enabled kernel [1] http://lists.opensuse.org/opensuse-packaging/2010-03/msg00125.html Thanks Glenn -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-kernel+help(a)opensuse.org

2 6

[opensuse-kernel] [PATCH] opensuse kernel workflow with osc branch
by Brandon Philips 02 Aug '10

02 Aug '10

Hello Michal- Goldwyn, Petr and I were talking about how it is a bit time consuming to add a quick fix to an osc branch of the kernel source and make sure the .changes is updated and patches added to the tar ball. So, I wrote a quick script based on scripts/log.sh that can ease this workflow to look like this: $ osc branch openSUSE:11.3/kernel-source $ osc co home:philipsb:branches:openSUSE:11.3:Update:Test/kernel-source $ mv ~/linux-2.6/driver-fix-for-something.patch . $ vim series.conf # add patch to series.conf $ ./log.sh $ osc commit The nice thing about this workflow is that it makes it easy to create a quick testing Kernel based on a couple of patches without having to use the git repo. I have used osc_wrapper, which is really great, but it requires some knowledge of how our branches and tags work to checkout the right tree to apply your patch on. I guess it would need to be added to the rpm/ directory so it was accessible from an osc checkout. Obviously we could figure out a way of sharing code with scripts/log.sh. What do you think? Thanks, Brandon >From 4dd13769f5b75aea1c16c796ce98c6c23b920458 Mon Sep 17 00:00:00 2001 From: Brandon Philips <brandon(a)ifup.org> Date: Mon, 19 Jul 2010 05:03:30 -0700 Subject: [PATCH] scripts: rpm/log.sh to create an osc branch workflow Add a nice workflow for adding a patch or two to an osc branch of the kernel. $ osc co home:philipsb:branches:openSUSE:11.3:Update:Test/kernel-source $ mv ~/linux-2.6/driver-fix-for-something.patch . $ vim series.conf # add patch to series.conf $ ./log.sh $ osc commit Signed-off-by: Brandon Philips <bphilips(a)suse.de> --- rpm/log.sh | 170 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 files changed, 170 insertions(+), 0 deletions(-) create mode 100755 rpm/log.sh diff --git a/rpm/log.sh b/rpm/log.sh new file mode 100755 index 0000000..39f03e0 --- /dev/null +++ b/rpm/log.sh @@ -0,0 +1,170 @@ +#! /bin/sh + +############################################################################# +# Copyright (c) 2004-2006,2008,2009 Novell, Inc. +# All Rights Reserved. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of version 2 of the GNU General Public License as +# published by the Free Software Foundation. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, contact Novell, Inc. +# +# To contact Novell about this file by physical or electronic mail, +# you may find current contact information at www.novell.com +############################################################################# + +# Construct a changes entry and commit log from a patch. + +if ! $using_git; then + echo "ERROR: not in a git working directory." + exit 1 +fi + +CHANGES=kernel-source.changes + +trap 'rm -rf "$tmpdir"' EXIT +tmpdir=$(mktemp -d /tmp/${0##*/}.XXXXXX) +message=$tmpdir/message + +log_entry() { + local entry=$1 + + echo "$entry" \ + | fmt --width 65 \ + | sed -e '1s/^/- /' -e '2,$s/^/ /' \ + >> $message +} + + +patch_meta() { + local patch=$1 + + subject=$(formail -c -x Subject < "$patch" \ + | sed -e 's, *\[[#/ A-Za-z0-9-]*\],,') + subject=${subject## } + subject=${subject%.} + + set -- $(formail -c -x References -x Reference < "$patch") + references="$*" +} + +patch_log_entry() { + local patch=$1 subject references old_subj old_ref old_patch="$tmpdir/old" + + git show "HEAD:$patch" >"$old_patch" 2>/dev/null + patch_meta "$old_patch" + old_subj="$subject" + old_ref="$references" + + patch_meta "$patch" + + local msg + if test -z "$subject" -o "$subject" != "$old_subj"; then + msg="$subject${references:+ ($references)}" + elif test "$references" != "$old_ref"; then + if test -n "$references"; then + msg="Update references ($references)" + fi + else + msg="Refresh" + fi + + log_entry "$patch: $msg${msg:+.}" +} + +find_patches() { + osc diff series.conf \ + | sed -n "s/^+\s*$patches.*$/\1/p" +} + +for file in "$@" $(find_patches); do + dirname=$(dirname $file) + basename=$(basename $file) + archive=$dirname.tar.bz2 + + if [ ! -f $basename ]; then + echo "ERROR: $basename added to series.conf but doesn't exist in $PWD" + exit 1 + fi + + if [ ! -d $dirname ]; then + tar xvf $archive + fi + + mv $basename $dirname + rm $archive + tar cfj $archive $dirname + + files[${#files[@]}]=$file +done + +if [ ${#files[@]} -eq 0 ]; then + echo "No modified files" >&2 + exit 1 +fi + +for file in "${files[@]}"; do + if [ "${file:0:1}" = - ]; then + log_entry "${file:1}: Delete." + else + case "$file" in + config/*) + if [ -z "$configs_updated" ]; then + log_entry "Update config files." + configs_updated=1 + fi + ;; + + patches.*) + patch_log_entry "$file" + ;; + + kabi/*/symvers-* | kabi/*/symtypes-* | kabi/*/symsets-* ) + if [ -z "$symvers_updated" ]; then + log_entry "Update reference module symbol versions." + symvers_updated=1 + fi + ;; + + series.conf) + # don't log changes in there + ;; + + *) + log_entry "$file: " + ;; + esac + fi +done + +if [ ! -s $message ]; then + echo "- " >> $message +fi + +if [ -z "$VC" ]; then + VC=vc + for search in $HOME/bin /work/src/bin scripts; do + if [ -x $search/$VC ]; then + VC=$search/$VC + break + fi + done +fi + +if $VC $CHANGES $message; then + entry=$(sed -ne '1,2d' -e '/^--*$/!p' -e '/^--*$/q' $CHANGES) + entry=${entry##$'\n'} + entry=${entry%%$'\n'} +fi + +for c in ls *.changes; do + [ $c = $CHANGES ] && continue + cp $CHANGES $c +done -- 1.7.1 -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-kernel+help(a)opensuse.org

3 7