May 2010 - openSUSE Kernel - openSUSE Mailing Lists

[opensuse-kernel] kernel-default-base-2.6.29-5.2.x86_64 rpm errors
by Dave Plater 18 Jul '24

18 Jul '24

Hi, I'm busy updating to the latest factory kernel and have received the following errors from kernel-default-base installation (I did insert a blank dvd during the installation of the rpm by zypper):- WARNING: /lib/modules/2.6.29-rc8-5-default/kernel/drivers/scsi/sd_mod.ko needs unknown symbol crc_t10dif WARNING: /lib/modules/2.6.29-rc8-5-default/kernel/drivers/scsi/sr_mod.ko needs unknown symbol register_cdrom WARNING: /lib/modules/2.6.29-rc8-5-default/kernel/drivers/scsi/sr_mod.ko needs unknown symbol cdrom_ioctl WARNING: /lib/modules/2.6.29-rc8-5-default/kernel/drivers/scsi/sr_mod.ko needs unknown symbol cdrom_media_changed WARNING: /lib/modules/2.6.29-rc8-5-default/kernel/drivers/scsi/sr_mod.ko needs unknown symbol cdrom_get_media_event WARNING: /lib/modules/2.6.29-rc8-5-default/kernel/drivers/scsi/sr_mod.ko needs unknown symbol cdrom_release WARNING: /lib/modules/2.6.29-rc8-5-default/kernel/drivers/scsi/sr_mod.ko needs unknown symbol cdrom_open WARNING: /lib/modules/2.6.29-rc8-5-default/kernel/drivers/scsi/sr_mod.ko needs unknown symbol unregister_cdrom WARNING: /lib/modules/2.6.29-rc8-5-default/kernel/drivers/scsi/sr_mod.ko needs unknown symbol cdrom_number_of_slots And then these errors which I think IIRC happened before when the kernel was first split into three:- Kernel image: /boot/vmlinuz-2.6.29-rc8-5-default Initrd image: /boot/initrd-2.6.29-rc8-5-default Root device: /dev/disk/by-id/ata-WDC_WD800JB-00JJC0_WD-WMAM9RA78067-part3 (/dev/sda3) (mounted on / as xfs) Resume device: /dev/disk/by-id/ata-WDC_WD800JB-00JJC0_WD-WMAM9RA78067-part2 (/dev/sda2) FATAL: Module processor not found. WARNING: no dependencies for kernel module 'processor' found. FATAL: Module thermal not found. WARNING: no dependencies for kernel module 'thermal' found. FATAL: Module ata_generic not found. WARNING: no dependencies for kernel module 'ata_generic' found. FATAL: Module piix not found. WARNING: no dependencies for kernel module 'piix' found. FATAL: Module ide_pci_generic not found. WARNING: no dependencies for kernel module 'ide_pci_generic' found. FATAL: Module fan not found. WARNING: no dependencies for kernel module 'fan' found. FATAL: Module xfs not found. WARNING: no dependencies for kernel module 'xfs' found. FATAL: Module usbhid not found. WARNING: no dependencies for kernel module 'usbhid' found. Kernel Modules: scsi_mod libata ata_piix edd ahci sd_mod usbcore ohci-hcd ehci-hcd uhci-hcd WARNING: /dev/shm/mkinitramfs.0drQsZ/mnt/lib/modules/2.6.29-rc8-5-default/kernel/drivers/scsi/sd_mod.ko needs unknown symbol crc_t10dif Features: block usb resume.userspace resume.kernel Bootsplash: openSUSE (1280x1024) 22669 blocks Should I open a bug report about the errors which are possibly from inserting a dvd while the kernel rpm was installing? Regards Dave P -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-kernel+help(a)opensuse.org

2 2

[opensuse-kernel] [PATCH V2] b43: Change firmware missing message to refer to openSUSE script
by Larry Finger 24 May '10

24 May '10

The error message output by b43 contains instructions for obtaining firmware; however, this naturally does not take account of the script /usr/sbin/install_bcm43xx_firmware. Modify the messages to suggest use of the script. Signed-off-by: Larry Finger <Larry.Finger(a)lwfinger.net> --- V2 - Fix a typo, and reference a wiki page rather than the forum. This patch could be used for 2.6.31 kernels in openSUSE 11.2 or 2.6.34 kernels in 11.3. Larry --- Index: linux-2.6/drivers/net/wireless/b43/main.c =================================================================== --- linux-2.6.orig/drivers/net/wireless/b43/main.c +++ linux-2.6/drivers/net/wireless/b43/main.c @@ -1976,10 +1976,14 @@ static void b43_release_firmware(struct static void b43_print_fw_helptext(struct b43_wl *wl, bool error) { const char text[] = - "You must go to " \ - "http://wireless.kernel.org/en/users/Drivers/b43#devicefirmware " \ - "and download the correct firmware for this driver version. " \ - "Please carefully read all instructions on this website.\n"; + "If you have Internet access with Linux, please open a " \ + "terminal and enter the command " \ + "\"sudo /usr/sbin/install_bcm43xx_firmware\" to download " \ + " the correct firmware for this driver version. " \ + "If you do not have Internet access, go to" \ + "http://en.opensuse.org/HCL/Network_Adapters_(Wireless)/ " \ + "Broadcom_BCM43xx and follow the instructions in the " \ + "\"Installing firmware from RPM packages\" section.\n"; if (error) b43err(wl, text); -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-kernel+help(a)opensuse.org

4 6

[opensuse-kernel] ZTE USB-Modem on openSUSE 11.3 M#7 Status (Was Re: SOLVED: ... ZTE MF626 on openSUSE 11.3 Milestone 6)
by Andi Sugandi 20 May '10

20 May '10

On 5/10/10, Greg KH <gregkh(a)suse.de> wrote: Aha! openSUSE 11.3 M#7 does 'switches' this modem well. >> During odd weeks, the "we need userspace crap like usb_modeswitch to make >> the device useful" approach is chosen. > > No, the kernel developers responsible for this driver, and the > usb-storage driver have a very clear approach, that does not change > per-week. It is: > Existing kernel quirks to automatically handle these types of > devices will be left alone in the kernel. Any new tweaks like > this, that can be done in userspace, should be done in > userspace. > > The "usb-modeswitch" program is the recommended way to resolve this, and > is part of the default udev rules, so perhaps you just need to add your > device id to it. These are the logs from when the device was plugged and when dialing the modem through KnetworkManager: After "zypper dup" this afternoon and these packages installed automatically : usb_modeswitch-data-1.1.2-1.1.noarch usb_modeswitch-1.1.2-1.1.x86_64 1. /var/log/messages: http://andi.opensuse-id.org/uploads/VarLogMessages-zte-113m7 2. /var/log/NetworkManager: http://andi.opensuse-id.org/uploads/VarLogNetworkManager-zte-113m7 It needs then no more manually running 'usb_modeswitch'[0] (like on openSUSE 11.2) on console neither mounting-unmounting the device[1] ( on openSUSE 11.3 Milestone #6 or earlier). Great job! Thanks good guys. [0] http://andi.opensuse-id.org/2009/10/19/opensuse-11-2-rc1-zte-hsdpa3g-modem/ [1] http://andi.opensuse-id.org/2010/05/13/3g-usb-modem-connection-through-knet… http://andi.opensuse-id.org/uploads/log-zte-113m6 Best regards, -- Andi Sugandi, openSUSE-Id Team, openSUSE Ambassador Bandung, Indonesia -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-kernel+help(a)opensuse.org

1 0

[opensuse-kernel] iwlagn users: beware of KOTD / Kernel:HEAD
by Stefan Seyfried 15 May '10

15 May '10

Hi, in case you are using iwlagn for wireless, be careful to keep an old kernel before updating to 2.6.34-rc7 from Kernel:HEAD. The ugly details are in https://bugzilla.novell.com/show_bug.cgi?id=606170 I'm right now testing if commit 96ff56419504ac6a610ff1af42330e0423242e16 (which went in after rc7) helps. -- Stefan Seyfried "Any ideas, John?" "Well, surrounding them's out." -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-kernel+help(a)opensuse.org

1 0

[opensuse-kernel] When does the kernel versions on obs synchronize up to be the same version on kernel.org (mainline)
by doiggl＠velocitynet.com.au 11 May '10

11 May '10

Hello, When does the kernel versions on opensuse build service synchronize up to be the same version on kernel.org (mainline) 1. kernel mainline on http://kernel.org/ shows v2.6.34-rc7 2. kernel version on obs shows kernel 2.6.34-rc6 Thanks Glenn -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-kernel+help(a)opensuse.org

3 2

SOLVED: Re: [opensuse-factory] Re: [opensuse-kernel] ZTE MF626 on openSUSE 11.3 Milestone 6
by Andi Sugandi 11 May '10

11 May '10

On 5/10/10, Stefan Seyfried <stefan.seyfried(a)googlemail.com> wrote: > can't you just "eject sr0" to switch the device? Definitely worth trying. Wonderful, it works! =) It automatically 'switches' to be as GSM-Modem: May 10 18:40:20 linux-6ajn hald: unmounted /dev/sr0 from '/media/ZTEMODEM' on behalf of uid 1000 May 10 18:40:25 linux-6ajn kernel: [ 247.803499] usb 1-1: USB disconnect, address 2 May 10 18:40:30 linux-6ajn kernel: [ 253.411100] usb 1-1: new high speed USB device using ehci_hcd and address 3 May 10 18:40:30 linux-6ajn kernel: [ 253.538102] usb 1-1: New USB device found, idVendor=19d2, idProduct=0031 May 10 18:40:30 linux-6ajn kernel: [ 253.538113] usb 1-1: New USB device strings: Mfr=2, Product=1, SerialNumber=0 May 10 18:40:30 linux-6ajn kernel: [ 253.538122] usb 1-1: Product: ZTE CDMA Technologies MSM May 10 18:40:30 linux-6ajn kernel: [ 253.538128] usb 1-1: Manufacturer: ZTE,Incorporated May 10 18:40:30 linux-6ajn kernel: [ 253.541826] option 1-1:1.0: GSM modem (1-port) converter detected May 10 18:40:30 linux-6ajn kernel: [ 253.542856] usb 1-1: GSM modem (1-port) converter now attached to ttyUSB0 May 10 18:40:30 linux-6ajn kernel: [ 253.543431] option 1-1:1.1: GSM modem (1-port) converter detected May 10 18:40:30 linux-6ajn kernel: [ 253.543720] usb 1-1: GSM modem (1-port) converter now attached to ttyUSB1 May 10 18:40:30 linux-6ajn kernel: [ 253.546466] scsi7 : usb-storage 1-1:1.2 May 10 18:40:30 linux-6ajn kernel: [ 253.547236] option 1-1:1.3: GSM modem (1-port) converter detected May 10 18:40:30 linux-6ajn kernel: [ 253.547559] usb 1-1: GSM modem (1-port) converter now attached to ttyUSB2 May 10 18:40:31 linux-6ajn modem-manager: (ttyUSB0) opening serial device... May 10 18:40:31 linux-6ajn modem-manager: (ttyUSB0): probe requested by plugin 'ZTE' May 10 18:40:31 linux-6ajn modem-manager: (ttyUSB2) opening serial device... May 10 18:40:31 linux-6ajn modem-manager: (ttyUSB2): probe requested by plugin 'ZTE' May 10 18:40:31 linux-6ajn modem-manager: (ttyUSB1) opening serial device... May 10 18:40:31 linux-6ajn modem-manager: (ttyUSB1): probe requested by plugin 'ZTE' May 10 18:40:31 linux-6ajn kernel: [ 254.563354] scsi 7:0:0:0: Direct-Access ZTE MMC Storage 2.31 PQ: 0 ANSI: 2 May 10 18:40:31 linux-6ajn kernel: [ 254.563825] sd 7:0:0:0: Attached scsi generic sg1 type 0 May 10 18:40:31 linux-6ajn kernel: [ 254.599549] sd 7:0:0:0: [sdb] Attached SCSI removable disk May 10 18:40:35 linux-6ajn modem-manager: (ttyUSB1) closing serial device... May 10 18:40:35 linux-6ajn modem-manager: (ZTE): GSM modem /sys/devices/pci0000:00/0000:00:12.2/usb1/1-1 claimed port ttyUSB1 May 10 18:40:35 linux-6ajn modem-manager: Added modem /sys/devices/pci0000:00/0000:00:12.2/usb1/1-1 May 10 18:40:37 linux-6ajn su: (to root) andi on /dev/pts/3 May 10 18:40:39 linux-6ajn modem-manager: (ttyUSB2) closing serial device... May 10 18:40:39 linux-6ajn modem-manager: Exported modem /sys/devices/pci0000:00/0000:00:12.2/usb1/1-1 as /org/freedesktop/ModemManager/Modems/0 May 10 18:40:39 linux-6ajn modem-manager: (ZTE): GSM modem /sys/devices/pci0000:00/0000:00:12.2/usb1/1-1 claimed port ttyUSB2 May 10 18:40:48 linux-6ajn modem-manager: (ttyUSB0) closing serial device... I am just curious on how it happened (worked without usb_modeswitch)? =) Best regards, -- Andi Sugandi, openSUSE-Id Team, openSUSE Ambassador Bandung, Indonesia -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-kernel+help(a)opensuse.org

5 6

Re: SOLVED: Re: [opensuse-factory] Re: [opensuse-kernel] ZTE MF626 on openSUSE 11.3 Milestone 6
by Greg KH 10 May '10

10 May '10

On Mon, May 10, 2010 at 05:29:36PM +0200, Kay Sievers wrote: > On Mon, 2010-05-10 at 08:02 -0700, Greg KH wrote: > > The "usb-modeswitch" program is the recommended way to resolve this, and > > is part of the default udev rules, so perhaps you just need to add your > > device id to it. > > It's all maintained in the usb_modeswitch package. Udev has no rules for > 3G modems anymore, just one weird cable modem thing. There have only > been a few for 3G modems, but they all moved to usb_modeswitch. Ah, good, that makes it even easier. So, see, it's all solved :) thanks, greg k-h -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-kernel+help(a)opensuse.org

1 0

[opensuse-kernel] ZTE MF626 on openSUSE 11.3 Milestone 6
by Andi Sugandi 10 May '10

10 May '10

Hi Listmates, I'm using ZTE MF626 (USB-3G Modem) to have Internet connection through (at least) option, and usbserial modules. I can see those features are enabled on openSUSE 11.3 M6: > grep USB_SERIAL= /usr/src/linux/.config CONFIG_USB_SERIAL=m > grep USB_SERIAL_OPTION /usr/src/linux/.config CONFIG_USB_SERIAL_OPTION=m Unfortunately openSUSE 11.3 M6 could not "switch" it to be as an usb-3G modem automatically (but M5, which is never investigated) because there is no usb_modeswitch package in factory repositories at this time. Should I file a bug? This is the log (var/log/messages) of oS-11.3 M6 when the device was plugged: May 10 15:40:45 linux-6ajn kernel: [ 1248.703090] usb 1-1: new high speed USB device using ehci_hcd and address 2 May 10 15:40:45 linux-6ajn kernel: [ 1248.830102] usb 1-1: New USB device found, idVendor=19d2, idProduct=2000 May 10 15:40:45 linux-6ajn kernel: [ 1248.830112] usb 1-1: New USB device strings: Mfr=2, Product=1, SerialNumber=0 May 10 15:40:45 linux-6ajn kernel: [ 1248.830120] usb 1-1: Product: ZTE CDMA Technologies MSM May 10 15:40:45 linux-6ajn kernel: [ 1248.830126] usb 1-1: Manufacturer: ZTE,Incorporated May 10 15:40:45 linux-6ajn kernel: [ 1248.953993] Initializing USB Mass Storage driver... May 10 15:40:45 linux-6ajn kernel: [ 1248.965428] scsi6 : usb-storage 1-1:1.0 May 10 15:40:45 linux-6ajn kernel: [ 1248.974569] usbcore: registered new interface driver usb-storage May 10 15:40:45 linux-6ajn kernel: [ 1248.974579] USB Mass Storage support registered. May 10 15:40:46 linux-6ajn kernel: [ 1249.990542] scsi 6:0:0:0: CD-ROM ZTE USB SCSI CD-ROM 2.31 PQ: 0 ANSI: 2 May 10 15:40:46 linux-6ajn kernel: [ 1249.990948] scsi 6:0:0:0: Attached scsi generic sg1 type 5 May 10 15:40:46 linux-6ajn kernel: [ 1250.097568] sr0: scsi-1 drive May 10 15:40:46 linux-6ajn kernel: [ 1250.097580] Uniform CD-ROM driver Revision: 3.20 May 10 15:40:46 linux-6ajn kernel: [ 1250.100269] sr 6:0:0:0: Attached scsi CD-ROM sr0 May 10 15:41:03 linux-6ajn kernel: [ 1266.800968] sr 6:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE May 10 15:41:03 linux-6ajn kernel: [ 1266.800983] sr 6:0:0:0: [sr0] Sense Key : Illegal Request [current] May 10 15:41:03 linux-6ajn kernel: [ 1266.800994] Info fld=0x0 May 10 15:41:03 linux-6ajn kernel: [ 1266.800999] sr 6:0:0:0: [sr0] Add. Sense: Logical block address out of range May 10 15:41:03 linux-6ajn kernel: [ 1266.801028] sr 6:0:0:0: [sr0] CDB: Read(10): 28 00 00 03 06 20 00 00 02 00 May 10 15:41:03 linux-6ajn kernel: [ 1266.801047] end_request: I/O error, dev sr0, sector 792704 May 10 15:41:03 linux-6ajn kernel: [ 1266.801057] Buffer I/O error on device sr0, logical block 99088 May 10 15:41:03 linux-6ajn kernel: [ 1266.807825] sr 6:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE May 10 15:41:03 linux-6ajn kernel: [ 1266.807834] sr 6:0:0:0: [sr0] Sense Key : Illegal Request [current] May 10 15:41:03 linux-6ajn kernel: [ 1266.807844] Info fld=0x0 May 10 15:41:03 linux-6ajn kernel: [ 1266.807848] sr 6:0:0:0: [sr0] Add. Sense: Logical block address out of range May 10 15:41:03 linux-6ajn kernel: [ 1266.807859] sr 6:0:0:0: [sr0] CDB: Read(10): 28 00 00 03 06 20 00 00 02 00 May 10 15:41:03 linux-6ajn kernel: [ 1266.807877] end_request: I/O error, dev sr0, sector 792704 May 10 15:41:03 linux-6ajn kernel: [ 1266.807884] Buffer I/O error on device sr0, logical block 99088 May 10 15:41:03 linux-6ajn kernel: [ 1266.813823] sr 6:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE May 10 15:41:03 linux-6ajn kernel: [ 1266.813833] sr 6:0:0:0: [sr0] Sense Key : Illegal Request [current] May 10 15:41:03 linux-6ajn kernel: [ 1266.813842] Info fld=0x0 May 10 15:41:03 linux-6ajn kernel: [ 1266.813846] sr 6:0:0:0: [sr0] Add. Sense: Logical block address out of range May 10 15:41:03 linux-6ajn kernel: [ 1266.813855] sr 6:0:0:0: [sr0] CDB: Read(10): 28 00 00 03 06 50 00 00 02 00 May 10 15:41:03 linux-6ajn kernel: [ 1266.813872] end_request: I/O error, dev sr0, sector 792896 May 10 15:41:03 linux-6ajn kernel: [ 1266.813879] Buffer I/O error on device sr0, logical block 99112 May 10 15:41:03 linux-6ajn kernel: [ 1266.819820] sr 6:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE May 10 15:41:03 linux-6ajn kernel: [ 1266.819829] sr 6:0:0:0: [sr0] Sense Key : Illegal Request [current] May 10 15:41:03 linux-6ajn kernel: [ 1266.819838] Info fld=0x0 May 10 15:41:03 linux-6ajn kernel: [ 1266.819842] sr 6:0:0:0: [sr0] Add. Sense: Logical block address out of range May 10 15:41:03 linux-6ajn kernel: [ 1266.819852] sr 6:0:0:0: [sr0] CDB: Read(10): 28 00 00 03 06 50 00 00 02 00 May 10 15:41:03 linux-6ajn kernel: [ 1266.819868] end_request: I/O error, dev sr0, sector 792896 May 10 15:41:03 linux-6ajn kernel: [ 1266.819875] Buffer I/O error on device sr0, logical block 99112 May 10 15:41:03 linux-6ajn kernel: [ 1266.833315] sr 6:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE May 10 15:41:03 linux-6ajn kernel: [ 1266.833326] sr 6:0:0:0: [sr0] Sense Key : Illegal Request [current] May 10 15:41:03 linux-6ajn kernel: [ 1266.833334] Info fld=0x0 May 10 15:41:03 linux-6ajn kernel: [ 1266.833338] sr 6:0:0:0: [sr0] Add. Sense: Logical block address out of range May 10 15:41:03 linux-6ajn kernel: [ 1266.833349] sr 6:0:0:0: [sr0] CDB: Read(10): 28 00 00 03 06 52 00 00 02 00 May 10 15:41:03 linux-6ajn kernel: [ 1266.833366] end_request: I/O error, dev sr0, sector 792904 May 10 15:41:03 linux-6ajn kernel: [ 1266.833374] Buffer I/O error on device sr0, logical block 99113 May 10 15:41:03 linux-6ajn kernel: [ 1266.839306] sr 6:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE May 10 15:41:03 linux-6ajn kernel: [ 1266.839315] sr 6:0:0:0: [sr0] Sense Key : Illegal Request [current] May 10 15:41:03 linux-6ajn kernel: [ 1266.839325] Info fld=0x0 May 10 15:41:03 linux-6ajn kernel: [ 1266.839329] sr 6:0:0:0: [sr0] Add. Sense: Logical block address out of range May 10 15:41:03 linux-6ajn kernel: [ 1266.839339] sr 6:0:0:0: [sr0] CDB: Read(10): 28 00 00 03 06 52 00 00 02 00 May 10 15:41:03 linux-6ajn kernel: [ 1266.839355] end_request: I/O error, dev sr0, sector 792904 May 10 15:41:03 linux-6ajn kernel: [ 1266.839363] Buffer I/O error on device sr0, logical block 99113 May 10 15:41:03 linux-6ajn kernel: [ 1266.845309] sr 6:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE May 10 15:41:03 linux-6ajn kernel: [ 1266.845319] sr 6:0:0:0: [sr0] Sense Key : Illegal Request [current] May 10 15:41:03 linux-6ajn kernel: [ 1266.845327] Info fld=0x0 May 10 15:41:03 linux-6ajn kernel: [ 1266.845331] sr 6:0:0:0: [sr0] Add. Sense: Logical block address out of range May 10 15:41:03 linux-6ajn kernel: [ 1266.845341] sr 6:0:0:0: [sr0] CDB: Read(10): 28 00 00 03 06 52 00 00 02 00 May 10 15:41:03 linux-6ajn kernel: [ 1266.845358] end_request: I/O error, dev sr0, sector 792904 May 10 15:41:03 linux-6ajn kernel: [ 1266.845365] Buffer I/O error on device sr0, logical block 99113 May 10 15:41:03 linux-6ajn kernel: [ 1266.851306] sr 6:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE May 10 15:41:03 linux-6ajn kernel: [ 1266.851315] sr 6:0:0:0: [sr0] Sense Key : Illegal Request [current] May 10 15:41:03 linux-6ajn kernel: [ 1266.851324] Info fld=0x0 May 10 15:41:03 linux-6ajn kernel: [ 1266.851328] sr 6:0:0:0: [sr0] Add. Sense: Logical block address out of range May 10 15:41:03 linux-6ajn kernel: [ 1266.851338] sr 6:0:0:0: [sr0] CDB: Read(10): 28 00 00 03 06 52 00 00 02 00 May 10 15:41:03 linux-6ajn kernel: [ 1266.851354] end_request: I/O error, dev sr0, sector 792904 May 10 15:41:03 linux-6ajn kernel: [ 1266.851361] Buffer I/O error on device sr0, logical block 99113 May 10 15:41:03 linux-6ajn kernel: [ 1266.857304] sr 6:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE May 10 15:41:03 linux-6ajn kernel: [ 1266.857314] sr 6:0:0:0: [sr0] Sense Key : Illegal Request [current] May 10 15:41:03 linux-6ajn kernel: [ 1266.857323] Info fld=0x0 May 10 15:41:03 linux-6ajn kernel: [ 1266.857327] sr 6:0:0:0: [sr0] Add. Sense: Logical block address out of range May 10 15:41:03 linux-6ajn kernel: [ 1266.857337] sr 6:0:0:0: [sr0] CDB: Read(10): 28 00 00 03 06 52 00 00 02 00 May 10 15:41:03 linux-6ajn kernel: [ 1266.857354] end_request: I/O error, dev sr0, sector 792904 May 10 15:41:03 linux-6ajn kernel: [ 1266.857361] Buffer I/O error on device sr0, logical block 99113 May 10 15:41:03 linux-6ajn kernel: [ 1266.863300] sr 6:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE May 10 15:41:03 linux-6ajn kernel: [ 1266.863309] sr 6:0:0:0: [sr0] Sense Key : Illegal Request [current] May 10 15:41:03 linux-6ajn kernel: [ 1266.863318] Info fld=0x0 May 10 15:41:03 linux-6ajn kernel: [ 1266.863322] sr 6:0:0:0: [sr0] Add. Sense: Logical block address out of range May 10 15:41:03 linux-6ajn kernel: [ 1266.863332] sr 6:0:0:0: [sr0] CDB: Read(10): 28 00 00 03 06 52 00 00 02 00 May 10 15:41:03 linux-6ajn kernel: [ 1266.863349] end_request: I/O error, dev sr0, sector 792904 May 10 15:41:03 linux-6ajn kernel: [ 1266.863356] Buffer I/O error on device sr0, logical block 99113 May 10 15:41:03 linux-6ajn kernel: [ 1266.869422] sr 6:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE May 10 15:41:03 linux-6ajn kernel: [ 1266.869431] sr 6:0:0:0: [sr0] Sense Key : Illegal Request [current] May 10 15:41:03 linux-6ajn kernel: [ 1266.869440] Info fld=0x0 May 10 15:41:03 linux-6ajn kernel: [ 1266.869444] sr 6:0:0:0: [sr0] Add. Sense: Logical block address out of range May 10 15:41:03 linux-6ajn kernel: [ 1266.869454] sr 6:0:0:0: [sr0] CDB: Read(10): 28 00 00 03 06 52 00 00 02 00 May 10 15:41:03 linux-6ajn kernel: [ 1266.869470] end_request: I/O error, dev sr0, sector 792904 May 10 15:41:03 linux-6ajn kernel: [ 1266.875296] sr 6:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE May 10 15:41:03 linux-6ajn kernel: [ 1266.875305] sr 6:0:0:0: [sr0] Sense Key : Illegal Request [current] May 10 15:41:03 linux-6ajn kernel: [ 1266.875314] Info fld=0x0 May 10 15:41:03 linux-6ajn kernel: [ 1266.875318] sr 6:0:0:0: [sr0] Add. Sense: Logical block address out of range May 10 15:41:03 linux-6ajn kernel: [ 1266.875328] sr 6:0:0:0: [sr0] CDB: Read(10): 28 00 00 03 06 44 00 00 02 00 May 10 15:41:03 linux-6ajn kernel: [ 1266.875344] end_request: I/O error, dev sr0, sector 792848 May 10 15:41:03 linux-6ajn kernel: [ 1266.881301] sr 6:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE May 10 15:41:03 linux-6ajn kernel: [ 1266.881312] sr 6:0:0:0: [sr0] Sense Key : Illegal Request [current] May 10 15:41:03 linux-6ajn kernel: [ 1266.881322] Info fld=0x0 May 10 15:41:03 linux-6ajn kernel: [ 1266.881326] sr 6:0:0:0: [sr0] Add. Sense: Logical block address out of range May 10 15:41:03 linux-6ajn kernel: [ 1266.881337] sr 6:0:0:0: [sr0] CDB: Read(10): 28 00 00 03 06 50 00 00 02 00 May 10 15:41:03 linux-6ajn kernel: [ 1266.881354] end_request: I/O error, dev sr0, sector 792896 May 10 15:41:03 linux-6ajn kernel: [ 1266.889289] sr 6:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE May 10 15:41:03 linux-6ajn kernel: [ 1266.889299] sr 6:0:0:0: [sr0] Sense Key : Illegal Request [current] May 10 15:41:03 linux-6ajn kernel: [ 1266.889308] Info fld=0x0 May 10 15:41:03 linux-6ajn kernel: [ 1266.889312] sr 6:0:0:0: [sr0] Add. Sense: Logical block address out of range May 10 15:41:03 linux-6ajn kernel: [ 1266.889322] sr 6:0:0:0: [sr0] CDB: Read(10): 28 00 00 03 06 52 00 00 02 00 May 10 15:41:03 linux-6ajn kernel: [ 1266.889339] end_request: I/O error, dev sr0, sector 792904 May 10 15:41:03 linux-6ajn kernel: [ 1266.897285] sr 6:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE May 10 15:41:03 linux-6ajn kernel: [ 1266.897295] sr 6:0:0:0: [sr0] Sense Key : Illegal Request [current] May 10 15:41:03 linux-6ajn kernel: [ 1266.897303] Info fld=0x0 May 10 15:41:03 linux-6ajn kernel: [ 1266.897307] sr 6:0:0:0: [sr0] Add. Sense: Logical block address out of range May 10 15:41:03 linux-6ajn kernel: [ 1266.897317] sr 6:0:0:0: [sr0] CDB: Read(10): 28 00 00 03 06 52 00 00 02 00 May 10 15:41:03 linux-6ajn kernel: [ 1266.897332] end_request: I/O error, dev sr0, sector 792904 May 10 15:41:03 linux-6ajn kernel: [ 1266.906288] sr 6:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE May 10 15:41:03 linux-6ajn kernel: [ 1266.906299] sr 6:0:0:0: [sr0] Sense Key : Illegal Request [current] May 10 15:41:03 linux-6ajn kernel: [ 1266.906309] Info fld=0x0 May 10 15:41:03 linux-6ajn kernel: [ 1266.906313] sr 6:0:0:0: [sr0] Add. Sense: Logical block address out of range May 10 15:41:03 linux-6ajn kernel: [ 1266.906323] sr 6:0:0:0: [sr0] CDB: Read(10): 28 00 00 03 06 52 00 00 02 00 May 10 15:41:03 linux-6ajn kernel: [ 1266.906341] end_request: I/O error, dev sr0, sector 792904 These are the installed kernel packages: > rpm -qa | grep kernel kernel-devel-2.6.34-7.1.noarch kernel-desktop-devel-2.6.34-7.1.x86_64 kernel-desktop-base-2.6.34-7.1.x86_64 kernel-firmware-20100227-3.1.noarch kernel-desktop-2.6.34-7.1.x86_64 kernel-source-2.6.34-7.1.noarch And this is in oS-11.2 (default kernel) for comparasion: May 10 17:15:20 os-id kernel: [ 1911.800116] usb 1-1: new high speed USB device using ehci_hcd and address 4 May 10 17:15:20 os-id kernel: [ 1911.943590] usb 1-1: New USB device found, idVendor=19d2, idProduct=2000 May 10 17:15:20 os-id kernel: [ 1911.943625] usb 1-1: New USB device strings: Mfr=2, Product=1, SerialNumber=0 May 10 17:15:20 os-id kernel: [ 1911.943641] usb 1-1: Product: ZTE CDMA Technologies MSM May 10 17:15:20 os-id kernel: [ 1911.943654] usb 1-1: Manufacturer: ZTE,Incorporated May 10 17:15:20 os-id kernel: [ 1911.943985] usb 1-1: configuration #1 chosen from 1 choice May 10 17:15:20 os-id kernel: [ 1911.949293] scsi8 : SCSI emulation for USB Mass Storage devices May 10 17:15:20 os-id kernel: [ 1911.949857] usb-storage: device found at 4 May 10 17:15:20 os-id kernel: [ 1911.949864] usb-storage: waiting for device to settle before scanning May 10 17:15:21 os-id kernel: [ 1912.951447] scsi 8:0:0:0: CD-ROM ZTE USB SCSI CD-ROM 2.31 PQ: 0 ANSI: 2 May 10 17:15:21 os-id kernel: [ 1912.987793] sr0: scsi-1 drive May 10 17:15:21 os-id kernel: [ 1912.988204] sr 8:0:0:0: Attached scsi CD-ROM sr0 May 10 17:15:21 os-id kernel: [ 1912.988393] sr 8:0:0:0: Attached scsi generic sg1 type 5 May 10 17:15:21 os-id kernel: [ 1912.989289] usb-storage: device scan complete Thanks in advance. Best regards, -- Andi Sugandi, openSUSE-Id Team, openSUSE Ambassador Bandung, Indonesia -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-kernel+help(a)opensuse.org

1 0

[opensuse-kernel] [PATCH] b43: Change firmware missing message to refer to openSUSE script
by Larry Finger 06 May '10

06 May '10

The error message output by b43 contains instructions for obtaining firmware; however, this naturally does not take account of the script /usr/sbin/install_bcm43xx_firmware. Modify the messages to suggest use of the script. Signed-off-by: Larry Finger <Larry.Finger(a)lwfinger.net> --- This patch could be used for 2.6.31 kernels in openSUSE 11.2 or 2.6.34 kernels in 11.3. Larry --- Index: linux-2.6/drivers/net/wireless/b43/main.c =================================================================== --- linux-2.6.orig/drivers/net/wireless/b43/main.c +++ linux-2.6/drivers/net/wireless/b43/main.c @@ -1976,10 +1976,14 @@ static void b43_release_firmware(struct static void b43_print_fw_helptext(struct b43_wl *wl, bool error) { const char text[] = - "You must go to " \ - "http://wireless.kernel.org/en/users/Drivers/b43#devicefirmware " \ - "and download the correct firmware for this driver version. " \ - "Please carefully read all instructions on this website.\n"; + "If you have Internet access with Linux, please open a " \ + "terminal and enter the command " \ + "\"sudo /usr/sbin/install_bcm43xx_firmware\" to download " \ + " the correct firmware for this driver version. " \ + "If you do not have Internel access, " \ + "http://forums.opensuse.org/get-help-here/wireless/" + "309432-welcome.html has instructions on how to download" \ + " from another machine.\n"; if (error) b43err(wl, text); -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-kernel+help(a)opensuse.org

3 4

[opensuse-kernel] ext3 - ENOMEM on file write
by Cameron Seader 04 May '10

04 May '10

Greetings, Wondering if anyone here has some experience with file writes in the kernel (specifically ext2 and ext3). I have been trying to figure this out and have no idea how this is happening. We have a case where we (Customer of mine using openAFS) have a system that is doing some successive reading and writing to a file. Here is the specific Code: --snip-- First, we're given an inode 'ainode', which should be the correct inode for the file we're looking at. (If it were incorrect, we would have gotten an error much earlier.) If we have iget, we call iget. The 2.6.16.60-* kernels lack iget, I believe, so instead we do: fid.i32.ino = ainode; fid.i32.gen = 0; dp = afs_cacheSBp->s_export_op->fh_to_dentry(afs_cacheSBp, &fid, sizeof(fid), FILEID_INO32_GEN); filp = dentry_open(dp, mntget(afs_cacheMnt), O_RDWR); (I'm not including error-checking. afs_cacheSBp is the superblock for the cache filesystem, so ext2 or ext3. afs_cacheMnt is the vfsmount for the cache FS) Then, to write to the file we do basically: (we're writing 'count' bytes from 'buf' to 'offset' in file 'filp'; I'm paraphrasing the code here, but I think I'm maintaining what it does) mm_segment_t _fs_space_decl; int code = 0; savelim = current->TASK_STRUCT_RLIM[RLIMIT_FSIZE].rlim_cur; current->TASK_STRUCT_RLIM[RLIMIT_FSIZE].rlim_cur = RLIM_INFINITY; _fs_space_decl = get_fs(); set_fs(get_ds()); if (filp->f_op->llseek) { if (filp->f_op->llseek(filp, offset, 0) != offset) return -1; } else { filp->f_pos = offset; } while (code == 0 && count > 0) { code = filp->f_op->write(filp, buf, count, &f->f_pos); if (code < 0) { code = -code; break; } else if (code == 0) { code = EIO; break; } buf += code; count -= code; code = 0; } set_fs(_fs_space_decl); current->TASK_STRUCT_RLIM[RLIMIT_FSIZE].rlim_cur = savelim; return code; It is here we are getting -ENOMEM from filp->f_op->write. Finally, normally to close a file, we do this: if (filp->f_dentry->d_inode) { filp_close(filp, NULL); } --snip-- It's not intended to be written to constantly, but in this case it probably is written to several times successively (due to certain parameters set a bit low, and the high load for these clients). I believe this function was called about 644203 times in the core I'm looking at, which means that file was written to at least around 644000 times... I'm assuming at least most of those were right after another. However, there would almost always be several reads of the same file between successive writes. (Again, in an 'open(); read(); close();' fashion) But they are probably all happening very quickly; I assume the cache for the stuff in this file is thrashing. How can we avoid this or make this much more stream-lined? Any help would be appreciated. Thanks, Cameron -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-kernel+help(a)opensuse.org

2 6