December 2010 - openSUSE Kernel - openSUSE Mailing Lists

[opensuse-kernel] kernel-default-base-2.6.29-5.2.x86_64 rpm errors
by Dave Plater 18 Jul '24

18 Jul '24

Hi, I'm busy updating to the latest factory kernel and have received the following errors from kernel-default-base installation (I did insert a blank dvd during the installation of the rpm by zypper):- WARNING: /lib/modules/2.6.29-rc8-5-default/kernel/drivers/scsi/sd_mod.ko needs unknown symbol crc_t10dif WARNING: /lib/modules/2.6.29-rc8-5-default/kernel/drivers/scsi/sr_mod.ko needs unknown symbol register_cdrom WARNING: /lib/modules/2.6.29-rc8-5-default/kernel/drivers/scsi/sr_mod.ko needs unknown symbol cdrom_ioctl WARNING: /lib/modules/2.6.29-rc8-5-default/kernel/drivers/scsi/sr_mod.ko needs unknown symbol cdrom_media_changed WARNING: /lib/modules/2.6.29-rc8-5-default/kernel/drivers/scsi/sr_mod.ko needs unknown symbol cdrom_get_media_event WARNING: /lib/modules/2.6.29-rc8-5-default/kernel/drivers/scsi/sr_mod.ko needs unknown symbol cdrom_release WARNING: /lib/modules/2.6.29-rc8-5-default/kernel/drivers/scsi/sr_mod.ko needs unknown symbol cdrom_open WARNING: /lib/modules/2.6.29-rc8-5-default/kernel/drivers/scsi/sr_mod.ko needs unknown symbol unregister_cdrom WARNING: /lib/modules/2.6.29-rc8-5-default/kernel/drivers/scsi/sr_mod.ko needs unknown symbol cdrom_number_of_slots And then these errors which I think IIRC happened before when the kernel was first split into three:- Kernel image: /boot/vmlinuz-2.6.29-rc8-5-default Initrd image: /boot/initrd-2.6.29-rc8-5-default Root device: /dev/disk/by-id/ata-WDC_WD800JB-00JJC0_WD-WMAM9RA78067-part3 (/dev/sda3) (mounted on / as xfs) Resume device: /dev/disk/by-id/ata-WDC_WD800JB-00JJC0_WD-WMAM9RA78067-part2 (/dev/sda2) FATAL: Module processor not found. WARNING: no dependencies for kernel module 'processor' found. FATAL: Module thermal not found. WARNING: no dependencies for kernel module 'thermal' found. FATAL: Module ata_generic not found. WARNING: no dependencies for kernel module 'ata_generic' found. FATAL: Module piix not found. WARNING: no dependencies for kernel module 'piix' found. FATAL: Module ide_pci_generic not found. WARNING: no dependencies for kernel module 'ide_pci_generic' found. FATAL: Module fan not found. WARNING: no dependencies for kernel module 'fan' found. FATAL: Module xfs not found. WARNING: no dependencies for kernel module 'xfs' found. FATAL: Module usbhid not found. WARNING: no dependencies for kernel module 'usbhid' found. Kernel Modules: scsi_mod libata ata_piix edd ahci sd_mod usbcore ohci-hcd ehci-hcd uhci-hcd WARNING: /dev/shm/mkinitramfs.0drQsZ/mnt/lib/modules/2.6.29-rc8-5-default/kernel/drivers/scsi/sd_mod.ko needs unknown symbol crc_t10dif Features: block usb resume.userspace resume.kernel Bootsplash: openSUSE (1280x1024) 22669 blocks Should I open a bug report about the errors which are possibly from inserting a dvd while the kernel rpm was installing? Regards Dave P -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-kernel+help(a)opensuse.org

2 2

[opensuse-kernel] [PATCH] scripts: add patch-tags-from-git
by Brandon Philips 09 Mar '11

09 Mar '11

usage: patch-tags-from-git <filename> <kernel checkout> Adds a Git-commit: tag from the From header also adds a Patch-mainline: tag if <kernel checkout> is given Signed-off-by: Brandon Philips <bphilips(a)suse.de> --- scripts/patch-tags-from-git | 62 +++++++++++++++++++++++++++++++++++++++++++ 1 files changed, 62 insertions(+), 0 deletions(-) create mode 100755 scripts/patch-tags-from-git diff --git a/scripts/patch-tags-from-git b/scripts/patch-tags-from-git new file mode 100755 index 0000000..2277376 --- /dev/null +++ b/scripts/patch-tags-from-git @@ -0,0 +1,62 @@ +#!/bin/bash +# Add suse Kernel repo headers to a patch created using git-format-patch +# +# Brandon Philips <bphilips(a)suse.de> + +if [ $# -lt 1 ]; then + echo "usage: $0 <filename> <kernel checkout>" + echo "Adds a Git-commit: tag from the From header" + echo "also adds a Patch-mainline: tag if <kernel checkout> is given" + exit 1 +fi + +FILE=$1 + +if [ ! -f $FILE ]; then + echo "No such file $1" + exit 2 +fi + +commit=$(head -n1 $FILE | sed -n "s%From\s$[0-9a-f]*$\s.*%\1%p") + +if [ "z$commit" = "z" ]; then + echo "$FILE doesn't look like a patch from git" +else + patch-tag -A git-commit="$commit" $FILE +fi + +if [ $# -ne 2 ]; then + exit 0 +fi + +DIR=$2 + +commit=$(patch-tag -p git-commit $FILE | grep -i "git-commit:" | sed "s%.*:\s$.*$%\1%g") + +if [ "z$commit" = "z" ]; then + echo "No git-commit tag in $FILE" + exit 3 +fi + +export GIT_DIR=$DIR/.git + +if [ ! -d $GIT_DIR ]; then + echo "No such directory $GIT_DIR" + echo 4 +fi + +mainline=$(git describe --contains $commit 2> /dev/null) + +if [ "z$mainline" = "z" ]; then + git show $commit > /dev/null + if git show $commit > /dev/null 2> /dev/null; then + merged=$(basename $DIR) + patch-tag -A Patch-mainline="Merged into $merged" $FILE + exit 0 + else + echo "$commit from $FILE does not exist in $DIR" + exit 5 + fi +fi + +patch-tag -A Patch-mainline="$mainline" $FILE -- 1.7.2.2 -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-kernel+help(a)opensuse.org

3 4

[opensuse-kernel] xen flavor problems
by Stephan Kulow 11 Jan '11

11 Jan '11

Hi, xen is back in factory and with it unfortunately also the problems in building kmps ;( xtables-addon: checking kernel version that we will build against... /bin/sh: /usr/src/linux-2.6.37-rc3-git6-8-obj/x86_64/xen/scripts/Makefile.xen: Permission denied /usr/src/linux-2.6.37-rc3-git6-8/scripts/basic/fixdep.c:398:1: fatal error: opening dependency file scripts/basic/.fixdep.d: Permission denied compilation terminated. make[4]: *** [scripts/basic/fixdep] Error 1 make[3]: *** [scripts_basic] Error 2 ./configure: line 10822: Updating /usr/src/linux+0: division by 0 (error token is "/src/linux+0") omnibook: Processing files: omnibook-kmp-xen-20100406_kUpdating-3.21.x86_64 error: File not found: /usr/src/packages/BUILDROOT/omnibook-20100406-3.21.x86_64/lib/modules/Updating- xen error: File must begin with "/": 2.6.37-rc3-git6-8 These problems did not appear when xen was disabled. Please fix them. Greetings, Stephan -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-kernel+help(a)opensuse.org

5 11

[opensuse-kernel] orinoco kernel driver bug on openSUSE 11.3
by Giacomo Comes 23 Dec '10

23 Dec '10

Hi, I have a wireless card Truemobile 1150 that uses the orinoco kernel driver. The driver has a bug and it doesn't work with wpa_supplicant 0.7.1 and newer (openSUSE 11.3) The problem has been discussed in the kernel wireless mailing list. A full description of the bug can be found here: http://marc.info/?l=linux-wireless&m=129039665705109&w=2 Dave Kilroy, the guy who developed the WPA functionality in the orinoco driver has created 4 patches which fixes the issue and make my card work properly. The 4 patches can be found here: http://marc.info/?l=linux-wireless&m=129063081222549&w=2 http://marc.info/?l=linux-wireless&m=129131397618647&w=2 http://marc.info/?l=linux-wireless&m=129156387232589&w=2 http://marc.info/?l=linux-wireless&m=129156397232733&w=2 The patches are already included in the current compat-wireless-2.6.tar.bz2 tarball and will appear in kernel 2.6.37: patches 1, 3 and 4 are already included in 2.6.37-rc6. Is it possible to have them included in the next openSUSE 11.3 kernel update? There is still an ongoing discussion about the suspend/resume issue: http://lists.infradead.org/pipermail/linux-pcmcia/2010-December/007671.html but that may take some time for a proper fix. Giacomo -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-kernel+help(a)opensuse.org

2 1

[opensuse-kernel] KOTD: kernel installation path doesn't change any more with new version
by Markus Koßmann 23 Dec '10

23 Dec '10

Until kernel-desktop-2.6.37-6.99.4.d385dff.x86_64.rpm there was release number and git tag in the installation path like: /lib/modules/2.6.37-rc5-6.99.4.d385dff-desktop/kernel/sound/synth/emux Now since kernel-desktop-2.6.37-6.99.7.0926a18.x86_64.rpm this looks like : /lib/modules/2.6.37-rc5-desktop/kernel/sound/synth/emux An therefore a new KOTD overwrites the old one unless other parts of the kernel name change. Is this change intended or should I open a bugreport for that ? -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-kernel+help(a)opensuse.org

2 2

[opensuse-kernel] How do I add a new kernel boot to /boot/grub/menu.lst ?
by doiggl＠velocitynet.com.au 22 Dec '10

22 Dec '10

Hello How do I add a new kernel boot to /boot/grub/menu.lst from a kernel compiled kernel in obs. So far I found these details from the kernel:- # rpm -qlp kernel-reiser4-2.6.36.2-56.1.x86_64.rpm | grep -i "\/boot\/" warning: kernel-reiser4-2.6.36.2-56.1.x86_64.rpm: Header V3 DSA/SHA1 Signature, key ID fb666c9e: NOKEY /boot/System.map-2.6.36.2-56-vanilla /boot/config-2.6.36.2-56-vanilla /boot/initrd-2.6.36.2-56-kdump /boot/initrd-2.6.36.2-56-vanilla /boot/initrd-vanilla /boot/symvers-2.6.36.2-56-vanilla.gz /boot/vmlinux-2.6.36.2-56-vanilla.gz /boot/vmlinuz-2.6.36.2-56-vanilla /boot/vmlinuz-vanilla Thanks Glenn -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-kernel+help(a)opensuse.org

2 1

[opensuse-kernel] Re: tumbleweed kernel packages not building
by Jiri Slaby 10 Dec '10

10 Dec '10

On 12/08/2010 10:00 PM, Greg KH wrote: > Hi Jiri, > > I've tried importing the Kernel:stable branch into tumbleweed, but it's > not able to build the preload kernel module for some odd reason: > > nothing provides kernel-devel = 2.6.36.1-2 needed by > kernel-syms, nothing provides kernel-default-devel = 2.6.36.1-2 > needed by kernel-syms, nothing provides kernel-devel = > 2.6.36.1-2 needed by kernel-desktop-devel, nothing provides > kernel-devel = 2.6.36.1-2 needed by kernel-xen-devel > > You can see this at the page at: > https://build.opensuse.org/stage/project/monitor?project=openSUSE%3ATumblew… > > I haven't added a few missing kernel builds at the moment (vmi, tracing, > docs), but I don't think that should be causing this error to show up. > > It's odd that kernel-devel is being asked for, as I didn't think that > was really provided by any package anymore. Hi, I though it will cause problems. I tried to persuade preload to build on all the repos I had there, but the change in preamble I did causes these kind of problems. I reverted it now. Note that in current kernels we *have* common kernel-devel package generated from kernel-source. It contains generated sources after make prepare or alike I assume. And the kernel-flavor-devel contains flavor specific things. mmarek would know more, hopefully. BTW preload build needs kernel -debuginfo packages to be built... And since OBS is broken in the way it sometimes doesn't rebuild packages when you change debuginfo flag (like it happened now), you would need to trigger a rebuild for the kernels to have -debuginfo, i.e. to build preload... thanks, -- js suse labs -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-kernel+help(a)opensuse.org

3 18

[opensuse-kernel] tumbleweed kernel packages not building
by Greg KH 09 Dec '10

09 Dec '10

Hi Jiri, I've tried importing the Kernel:stable branch into tumbleweed, but it's not able to build the preload kernel module for some odd reason: nothing provides kernel-devel = 2.6.36.1-2 needed by kernel-syms, nothing provides kernel-default-devel = 2.6.36.1-2 needed by kernel-syms, nothing provides kernel-devel = 2.6.36.1-2 needed by kernel-desktop-devel, nothing provides kernel-devel = 2.6.36.1-2 needed by kernel-xen-devel You can see this at the page at: https://build.opensuse.org/stage/project/monitor?project=openSUSE%3ATumblew… I haven't added a few missing kernel builds at the moment (vmi, tracing, docs), but I don't think that should be causing this error to show up. It's odd that kernel-devel is being asked for, as I didn't think that was really provided by any package anymore. Any ideas what I need to do here? thanks, greg k-h -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-kernel+help(a)opensuse.org

3 3

[opensuse-kernel] s2r fails for kotd on openSUSE 11.3
by Gerald Pfeifer 06 Dec '10

06 Dec '10

I gave the kernel of the day (2.6.37-rc2-1.99.2.facd623-default) a spin on an up-to-date openSUSE 11.3 system and everything works like a charm, except for one thing -- suspend to RAM (or disk for that matter). Digging into this a bit, I found that it seems to be tpm modules that cause this, and after unloading them suspend works again: # lsmod | grep tpm tpm_tis 12002 0 tpm 17401 1 tpm_tis tpm_bios 6748 1 tpm # rmmod tpm_tis # rmmod tpm # rmmod tpm_bios # lsmod | grep tpm # Does it make sense to file a Bugzilla for such a case, or will that be an immediate INVALID or WONTFIX? What kind of information in addition to the above and the relevant snippet of dmesg below would be helpful in case? Gerald [52145.975726] PM: Syncing filesystems ... done. [52146.328603] PM: Preparing system for mem sleep [52146.328757] Freezing user space processes ... (elapsed 0.01 seconds) done. [52146.344111] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. [52146.360116] PM: Entering mem sleep [52146.360209] Suspending console(s) (use no_console_suspend to debug) [52146.516254] sd 0:0:0:0: [sda] Synchronizing SCSI cache [52146.516635] sd 0:0:0:0: [sda] Stopping disk [52146.580137] tpm_tis 00:0a: tpm_transmit: tpm_send: error -5 [52146.580145] legacy_suspend(): pnp_bus_suspend+0x0/0xa0 returns -5 [52146.580148] PM: Device 00:0a failed to suspend: error -5 [52146.887770] PM: Some devices failed to suspend [52146.887811] sd 0:0:0:0: [sda] Starting disk [52147.376142] PM: resume of devices complete after 488.367 msecs [52147.376336] PM: Finishing wakeup. [52147.376338] Restarting tasks ... done. [52147.378718] video LNXVIDEO:00: Restoring backlight state [52148.368235] e1000e 0000:00:19.0: irq 47 for MSI/MSI-X [52148.424106] e1000e 0000:00:19.0: irq 47 for MSI/MSI-X [52148.424409] ADDRCONF(NETDEV_UP): eth0: link is not ready [52148.454024] ADDRCONF(NETDEV_UP): wlan0: link is not ready [52151.999068] pcmcia_socket pcmcia_socket0: pccard: card ejected from slot 0 [52153.309755] PM: Syncing filesystems ... done. [52153.861875] PM: Preparing system for mem sleep [52153.862037] Freezing user space processes ... (elapsed 0.03 seconds) done. [52153.892124] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. [52153.908123] PM: Entering mem sleep [52153.908216] Suspending console(s) (use no_console_suspend to debug) [52154.062757] sd 0:0:0:0: [sda] Synchronizing SCSI cache [52154.063092] sd 0:0:0:0: [sda] Stopping disk [52154.120139] tpm_tis 00:0a: tpm_transmit: tpm_send: error -5 [52154.120146] legacy_suspend(): pnp_bus_suspend+0x0/0xa0 returns -5 [52154.120149] PM: Device 00:0a failed to suspend: error -5 [52154.439124] PM: Some devices failed to suspend [52154.439157] sd 0:0:0:0: [sda] Starting disk [52154.912092] PM: resume of devices complete after 472.963 msecs [52154.912286] PM: Finishing wakeup. [52154.912287] Restarting tasks ... done. -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-kernel+help(a)opensuse.org

7 14

[opensuse-kernel] Why is IPV6 built in?
by Larry Finger 03 Dec '10

03 Dec '10

Is there some good reason why IPV6 is built into the kernel rather than as a module? There are a lot of systems where every DNS lookup has to timeout on the IPV6 lookup, thus IPV6 must be disabled. When it is a module, the YaST setting suffices, but if built in, it must be disabled on the kernel boot line in GRUB. That is confusing. Larry -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-kernel+help(a)opensuse.org

7 21

[opensuse-kernel] continuous flow of: btusb_intr_complete: hci0 urb ffff8800b553e980 failed to resubmit (1)
by Stefan Seyfried 01 Dec '10

01 Dec '10

Hi, since a few days (probably since the update to 2.6.37-rc), i'm getting those all the time when using my Bluetooth mouse: [280800.710274] btusb_intr_complete: hci0 urb ffff8800b553e980 failed to resubmit (1) [280800.711255] btusb_bulk_complete: hci0 urb ffff88003b01de40 failed to resubmit (1) [280800.712234] btusb_bulk_complete: hci0 urb ffff880130bae500 failed to resubmit (1) [280810.713221] btusb_intr_complete: hci0 urb ffff88012be0ce00 failed to resubmit (1) [280810.714203] btusb_bulk_complete: hci0 urb ffff8800532f9540 failed to resubmit (1) [280810.715209] btusb_bulk_complete: hci0 urb ffff88003b13af00 failed to resubmit (1) [280814.713273] btusb_intr_complete: hci0 urb ffff880045756d80 failed to resubmit (1) [280814.714293] btusb_bulk_complete: hci0 urb ffff880035d1bec0 failed to resubmit (1) [280814.715285] btusb_bulk_complete: hci0 urb ffff88003b13ac00 failed to resubmit (1) [280821.713412] btusb_intr_complete: hci0 urb ffff8801293cf0c0 failed to resubmit (1) [280821.714431] btusb_bulk_complete: hci0 urb ffff88003b13ac00 failed to resubmit (1) [280821.715432] btusb_bulk_complete: hci0 urb ffff880035d1bec0 failed to resubmit (1) [280835.707273] btusb_intr_complete: hci0 urb ffff8800a83a6c80 failed to resubmit (1) [280835.708233] btusb_bulk_complete: hci0 urb ffff8801292986c0 failed to resubmit (1) [280835.709269] btusb_bulk_complete: hci0 urb ffff880078654f00 failed to resubmit (1) Has this something to do with runtime power management? It seems like it's always 3 messages about 2 or 3 seconds after the last mouse movement. -- Stefan Seyfried "Any ideas, John?" "Well, surrounding them's out." -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-kernel+help(a)opensuse.org

4 11