October 2010 - openSUSE Kernel - openSUSE Mailing Lists

[opensuse-kernel] kernel-default-base-2.6.29-5.2.x86_64 rpm errors
by Dave Plater 18 Jul '24

18 Jul '24

Hi, I'm busy updating to the latest factory kernel and have received the following errors from kernel-default-base installation (I did insert a blank dvd during the installation of the rpm by zypper):- WARNING: /lib/modules/2.6.29-rc8-5-default/kernel/drivers/scsi/sd_mod.ko needs unknown symbol crc_t10dif WARNING: /lib/modules/2.6.29-rc8-5-default/kernel/drivers/scsi/sr_mod.ko needs unknown symbol register_cdrom WARNING: /lib/modules/2.6.29-rc8-5-default/kernel/drivers/scsi/sr_mod.ko needs unknown symbol cdrom_ioctl WARNING: /lib/modules/2.6.29-rc8-5-default/kernel/drivers/scsi/sr_mod.ko needs unknown symbol cdrom_media_changed WARNING: /lib/modules/2.6.29-rc8-5-default/kernel/drivers/scsi/sr_mod.ko needs unknown symbol cdrom_get_media_event WARNING: /lib/modules/2.6.29-rc8-5-default/kernel/drivers/scsi/sr_mod.ko needs unknown symbol cdrom_release WARNING: /lib/modules/2.6.29-rc8-5-default/kernel/drivers/scsi/sr_mod.ko needs unknown symbol cdrom_open WARNING: /lib/modules/2.6.29-rc8-5-default/kernel/drivers/scsi/sr_mod.ko needs unknown symbol unregister_cdrom WARNING: /lib/modules/2.6.29-rc8-5-default/kernel/drivers/scsi/sr_mod.ko needs unknown symbol cdrom_number_of_slots And then these errors which I think IIRC happened before when the kernel was first split into three:- Kernel image: /boot/vmlinuz-2.6.29-rc8-5-default Initrd image: /boot/initrd-2.6.29-rc8-5-default Root device: /dev/disk/by-id/ata-WDC_WD800JB-00JJC0_WD-WMAM9RA78067-part3 (/dev/sda3) (mounted on / as xfs) Resume device: /dev/disk/by-id/ata-WDC_WD800JB-00JJC0_WD-WMAM9RA78067-part2 (/dev/sda2) FATAL: Module processor not found. WARNING: no dependencies for kernel module 'processor' found. FATAL: Module thermal not found. WARNING: no dependencies for kernel module 'thermal' found. FATAL: Module ata_generic not found. WARNING: no dependencies for kernel module 'ata_generic' found. FATAL: Module piix not found. WARNING: no dependencies for kernel module 'piix' found. FATAL: Module ide_pci_generic not found. WARNING: no dependencies for kernel module 'ide_pci_generic' found. FATAL: Module fan not found. WARNING: no dependencies for kernel module 'fan' found. FATAL: Module xfs not found. WARNING: no dependencies for kernel module 'xfs' found. FATAL: Module usbhid not found. WARNING: no dependencies for kernel module 'usbhid' found. Kernel Modules: scsi_mod libata ata_piix edd ahci sd_mod usbcore ohci-hcd ehci-hcd uhci-hcd WARNING: /dev/shm/mkinitramfs.0drQsZ/mnt/lib/modules/2.6.29-rc8-5-default/kernel/drivers/scsi/sd_mod.ko needs unknown symbol crc_t10dif Features: block usb resume.userspace resume.kernel Bootsplash: openSUSE (1280x1024) 22669 blocks Should I open a bug report about the errors which are possibly from inserting a dvd while the kernel rpm was installing? Regards Dave P -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-kernel+help(a)opensuse.org

2 2

[opensuse-kernel] Build status is 'broken' for Build Service > Projects > Kernel:HEAD > kernel-vanilla
by doiggl＠velocitynet.com.au 27 Oct '10

27 Oct '10

Hello, Build status is 'broken' for Build Service > Projects > Kernel:HEAD > kernel-vanilla See https://build.opensuse.org/package/show?package=kernel-vanilla&project=Kern… Perhaps a refresh to 2.6.36 is needed from the 2.6.36-rc8 is needed as well. Another question I have is: Can the process be automated so the current kernel mainline dragged in and build all the flavours against them eg vanilla, default... with minimal manual intervention ?. If the main page at http://kernel.org/ has changed , something has been changed or added in one of these -linux-next -snapshot -mainline -stable Example of extracting the file listing. # wget -c http://kernel.org/ --2010-10-26 00:09:55-- http://kernel.org/ Resolving kernel.org... 149.20.20.133, 204.152.191.37 Connecting to kernel.org|149.20.20.133|:80... connected. HTTP request sent, awaiting response... 200 OK Length: unspecified [text/html] Saving to: `index.html' [ <=> 30,627 39.2K/s in 0.8s 2010-10-26 00:09:57 (39.2 KB/s) - `index.html' saved [30627] md5sum can be used if the page has changed. # md5sum index.html f3dcc81e46466fc6cd696f419184f3b8 index.html The value could be compared to say yesterdays value and any diferrences used. Could get the files with this: # grep -i tar.bz2 index.html | /usr/bin/cut -d"\"" -f2 http://www.kernel.org/pub/linux/kernel/v2.6/linux-2.6.36.tar.bz2 http://www.kernel.org/pub/linux/kernel/v2.6/linux-2.6.36.tar.bz2 http://www.kernel.org/pub/linux/kernel/v2.6/linux-2.6.36.tar.bz2 http://www.kernel.org/pub/linux/kernel/v2.6/linux-2.6.36.tar.bz2 http://www.kernel.org/pub/linux/kernel/v2.6/linux-2.6.35.7.tar.bz2 http://www.kernel.org/pub/linux/kernel/v2.6/linux-2.6.34.7.tar.bz2 http://www.kernel.org/pub/linux/kernel/v2.6/linux-2.6.33.7.tar.bz2 http://www.kernel.org/pub/linux/kernel/v2.6/linux-2.6.32.24.tar.bz2 http://www.kernel.org/pub/linux/kernel/v2.6/linux-2.6.31.14.tar.bz2 http://www.kernel.org/pub/linux/kernel/v2.6/linux-2.6.27.54.tar.bz2 http://www.kernel.org/pub/linux/kernel/v2.4/linux-2.4.37.10.tar.bz2 Cheers Glenn -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-kernel+help(a)opensuse.org

2 1

[opensuse-kernel] /dev/root?
by Stefan Seyfried 25 Oct '10

25 Oct '10

Hi, simple question: who creates the /dev/root symlink? I'm pretty sure it's udev, but I could not find a rule for it on current FACTORY, so I'm asking here ;-) Thanks, -- Stefan Seyfried "Any ideas, John?" "Well, surrounding them's out." -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-kernel+help(a)opensuse.org

3 3

[opensuse-kernel] Unloading cx8802 results in crash of ir_core:ir_unregister_class
by Hans-Peter Jansen 20 Oct '10

20 Oct '10

Hi Mauro, since you got your fingers dirty with ir, I would like to direct this issue towards you. One of my servers acts as a vdr with 3 video cards: 07:01.0 Multimedia video controller: Conexant Systems, Inc. CX23880/1/2/3 PCI Video and Audio Decoder (rev 05) Subsystem: Hauppauge computer works Inc. Device 6906 Flags: medium devsel, IRQ 20 Memory at fa000000 (32-bit, non-prefetchable) [size=16M] Capabilities: [44] Vital Product Data <?> Capabilities: [4c] Power Management version 2 Kernel modules: cx8800 07:01.1 Multimedia controller: Conexant Systems, Inc. CX23880/1/2/3 PCI Video and Audio Decoder [Audio Port] (rev 05) Subsystem: Hauppauge computer works Inc. Device 6906 Flags: medium devsel, IRQ 20 Memory at f9000000 (32-bit, non-prefetchable) [size=16M] Capabilities: [4c] Power Management version 2 Kernel modules: cx88-alsa 07:01.2 Multimedia controller: Conexant Systems, Inc. CX23880/1/2/3 PCI Video and Audio Decoder [MPEG Port] (rev 05) Subsystem: Hauppauge computer works Inc. Device 6906 Flags: medium devsel, IRQ 20 Memory at f8000000 (32-bit, non-prefetchable) [size=16M] Capabilities: [4c] Power Management version 2 Kernel modules: cx8802 07:01.4 Multimedia controller: Conexant Systems, Inc. CX23880/1/2/3 PCI Video and Audio Decoder [IR Port] (rev 05) Subsystem: Hauppauge computer works Inc. Device 6906 Flags: bus master, medium devsel, latency 64, IRQ 10 Memory at f7000000 (32-bit, non-prefetchable) [size=16M] Capabilities: [4c] Power Management version 2 07:02.0 Multimedia video controller: Conexant Systems, Inc. CX23880/1/2/3 PCI Video and Audio Decoder (rev 05) Subsystem: Hauppauge computer works Inc. Device 6906 Flags: medium devsel, IRQ 21 Memory at f6000000 (32-bit, non-prefetchable) [size=16M] Capabilities: [44] Vital Product Data <?> Capabilities: [4c] Power Management version 2 Kernel modules: cx8800 07:02.1 Multimedia controller: Conexant Systems, Inc. CX23880/1/2/3 PCI Video and Audio Decoder [Audio Port] (rev 05) Subsystem: Hauppauge computer works Inc. Device 6906 Flags: medium devsel, IRQ 21 Memory at f5000000 (32-bit, non-prefetchable) [size=16M] Capabilities: [4c] Power Management version 2 Kernel modules: cx88-alsa 07:02.2 Multimedia controller: Conexant Systems, Inc. CX23880/1/2/3 PCI Video and Audio Decoder [MPEG Port] (rev 05) Subsystem: Hauppauge computer works Inc. Device 6906 Flags: medium devsel, IRQ 21 Memory at f4000000 (32-bit, non-prefetchable) [size=16M] Capabilities: [4c] Power Management version 2 Kernel modules: cx8802 07:02.4 Multimedia controller: Conexant Systems, Inc. CX23880/1/2/3 PCI Video and Audio Decoder [IR Port] (rev 05) Subsystem: Hauppauge computer works Inc. Device 6906 Flags: bus master, medium devsel, latency 64, IRQ 3 Memory at f3000000 (32-bit, non-prefetchable) [size=16M] Capabilities: [4c] Power Management version 2 07:03.0 Multimedia controller: Philips Semiconductors SAA7146 (rev 01) Subsystem: Technotrend Systemtechnik GmbH Technotrend/Hauppauge DVB card rev2.3 Flags: bus master, medium devsel, latency 64, IRQ 22 Memory at f2fff000 (32-bit, non-prefetchable) [size=512] Kernel driver in use: dvb Kernel modules: dvb-ttpci The Technotrend ff-dvb card is used with a cam and Alphacrypt CI, that seem to need regular driver module unloads to keep working properly. Unfortunately, unloading all the dvb drivers is not possible, because unloading cx8802 leads to this oops: Welcome to openSUSE 11.1 - Kernel 2.6.34.7-4-pae (ttyS0) [111047.940641] BUG: unable to handle kernel paging request at 313a3030 [111047.953710] IP: [<c03654fe>] sysfs_remove_group+0x7e/0xd0 [111047.964838] *pdpt = 0000000029f53001 *pde = 0000000000000000 [111047.976687] Oops: 0000 [#1] SMP [111047.983453] last sysfs file: /sys/devices/system/cpu/cpu7/cache/index2/shared_cpu_map [111047.999559] Modules linked in: ip6t_LOG ipt_MASQUERADE xt_pkttype xt_TCPMSS xt_tcpudp ipt_LOG xt_limit iptable_nat ] [111048.204691] [111048.207843] Pid: 10029, comm: rmmod Not tainted 2.6.34.7-4-pae #1 P7F-E/System Product Name [111048.224918] EIP: 0060:[<c03654fe>] EFLAGS: 00210206 CPU: 0 [111048.236201] EIP is at sysfs_remove_group+0x7e/0xd0 [111048.246007] EAX: ef4ff008 EBX: 313a3030 ECX: f0600000 EDX: 00000000 [111048.258879] ESI: 00000000 EDI: efb7e71c EBP: ef4ff008 ESP: e3ee7e64 [111048.271716] DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068 [111048.282668] Process rmmod (pid: 10029, ti=e3ee6000 task=eaf00e00 task.ti=e3ee6000) [111048.298133] Stack: [111048.302319] f02cabe0 00000041 ef5208c0 ef49ac00 00200286 efb7e700 ef3f0000 00000000 [111048.318132] <0> ef329800 f8f84932 efb7e700 ef3f0000 f8f84044 00000000 f8ffffff f015f1c0 [111048.334811] <0> ef329800 f917c655 00000000 f8000000 f9178dd9 01000000 00000000 f8ffffff [111048.351939] Call Trace: [111048.357213] [<f8f84932>] ir_unregister_class+0x32/0x60 [ir_core] [111048.369821] [<f8f84044>] ir_input_unregister+0x44/0x90 [ir_core] [111048.382338] [<f917c655>] cx88_ir_fini+0x25/0x50 [cx88xx] [111048.393437] [<f9178dd9>] cx88_core_put+0xb9/0x140 [cx88xx] [111048.404834] [<f91e8795>] cx8802_remove+0x82/0x169 [cx8802] [111048.416319] [<c041d966>] pci_device_remove+0x16/0x40 [111048.426610] [<c04b214d>] __device_release_driver+0x6d/0xd0 [111048.437993] [<c04b222f>] driver_detach+0x7f/0x90 [111048.447872] [<c04b11fa>] bus_remove_driver+0x7a/0x100 [111048.458687] [<c041db6e>] pci_unregister_driver+0x2e/0x80 [111048.469658] [<c0279669>] sys_delete_module+0x179/0x240 [111048.480262] [<c020320c>] sysenter_do_call+0x12/0x22 [111048.490357] [<ffffe424>] 0xffffe424 [111048.497680] Code: f0 ff 0e 0f 94 c0 84 c0 75 0b 83 c4 14 5b 5e 5f 5d c3 8d 76 00 83 c4 14 89 f0 5b 5e 5f 5d e9 ca e [111048.537852] EIP: [<c03654fe>] sysfs_remove_group+0x7e/0xd0 SS:ESP 0068:e3ee7e64 [111048.552782] CR2: 00000000313a3030 [111048.559854] ---[ end trace d7231a8e672c4adc ]--- Any ideas, what's going wrong here? Pete -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-kernel+help(a)opensuse.org

3 4

[opensuse-kernel] TSC question for kernel developers
by Stefan Seyfried 15 Oct '10

15 Oct '10

Hi I know it's slightly offtopic, but I guess people here might know the answer ;-) On a modern CPU, with constant_tsc feature, how well synchronized are the TSCs when synchronized on bootup by the linux kernel? And do they stay like that, or do they drift? Thanks, Stefan -- Stefan Seyfried "Any ideas, John?" "Well, surrounding them's out." -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-kernel+help(a)opensuse.org

2 2

[opensuse-kernel] How do I automate setting .config entries to "n"
by doiggl＠velocitynet.com.au 13 Oct '10

13 Oct '10

Hello, I get this abort message such as this example when compiling a package which involves a kernel. and the .config file. It always ends in 'aborted' at the end like this. "Texas Instruments ADS7871 A/D converter (SENSORS_ADS7871) [N/m/y/?] (NEW) aborted!" or "Compile Remote Controller keymap modules (RC_MAP) [M/n/?] (NEW) aborted!" It falls over on a diferrent line in the .config each time I submit a rebuild. This is a slow process doing one item at a time. Question. Is is possible to automatically set it so that (NEW) entries are set and stored in the .config like this CONFIG_{itemname}=n Thanks Glenn - So far its been a case of append the value to the .config eg CONFIG_RC_MAP=n - Then submit the build again, wait and encocounter the error on another .config entry. Here is a small list I struck so far. I added them in one at a time to the .config and submit another build. Its a slow process. CONFIG_CROSS_COMPILE="" CONFIG_COMPACTION=n CONFIG_ACPI_HED=n CONFIG_MFD_WM8994=n CONFIG_PCCARD_NONSTATIC=n CONFIG_ACPI_APEI=n CONFIG_INTEL_IDLE=n CONFIG_PCI_CNB20LE_QUIRK=n CONFIG_IP_MROUTE_MULTIPLE_TABLES=n CONFIG_NETFILTER_XT_TARGET_TEE=n CONFIG_NET_SCTPPROBE=n -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-kernel+help(a)opensuse.org

2 4

[opensuse-kernel] query about result from #check-for-config-changes .config.orig .config
by doiggl＠velocitynet.com.au 07 Oct '10

07 Oct '10

Hello What am I missing here . I have these parameters set in .config.orig and .config 1. # grep -i reiser .config.orig CONFIG_REISERFS_FS=m # CONFIG_REISERFS_CHECK is not set # CONFIG_REISERFS_PROC_INFO is not set CONFIG_REISERFS_FS_XATTR=y CONFIG_REISERFS_FS_POSIX_ACL=y CONFIG_REISERFS_FS_SECURITY=y 2. # grep -i reiser .config CONFIG_REISERFS_FS=m # CONFIG_REISERFS_CHECK is not set # CONFIG_REISERFS_PROC_INFO is not set CONFIG_REISERFS_FS_XATTR=y CONFIG_REISERFS_FS_POSIX_ACL=y CONFIG_REISERFS_FS_SECURITY=y CONFIG_REISER4_DEBUG=n CONFIG_REISER4_FS=m - I get this result from /usr/src/packages/SOURCES/check-for-config-changes .config.orig .config ## Changes after running make oldconfig: +# CONFIG_REISER4_DEBUG is not set +CONFIG_REISER4_FS=m Question. How can this be fixed ? Thanks Glenn content of check-for-config-changes listes at: https://build.opensuse.org/package/view_file?file=check-for-config-changes&… -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-kernel+help(a)opensuse.org

1 0

[opensuse-kernel] KMP building hosed since 2.6.36-rc
by Jan Engelhardt 06 Oct '10

06 Oct '10

Hi, Starting with 2.6.36.0_rc4, KMP building is hosed. In security:netfilter/xtables-addons's buildlog for openSUSE_Factory/x86_64 I can find: + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --define 'disturl obs:/ /build.opensuse.org/security:netfilter/openSUSE_Factory/3420749138d66ecbf71d1fbb e3f4bd8c-xtables-addons' --eval %suse_insert_debug_package //usr/src/packages/SOU RCES/xtables-addons.spec /usr/src/linux-2.6.36-rc4-16/scripts/basic/fixdep.c:398:1: fatal error: opening dependency file scripts/basic/.fixdep.d: Permission denied compilation terminated. make[4]: *** [scripts/basic/fixdep] Error 1 make[3]: *** [scripts_basic] Error 2 /usr/src/linux-2.6.36-rc4-16/scripts/basic/fixdep.c:398:1: fatal error: opening dependency file scripts/basic/.fixdep.d: Permission denied compilation terminated. make[4]: *** [scripts/basic/fixdep] Error 1 make[3]: *** [scripts_basic] Error 2 /bin/sh: /usr/src/linux-2.6.36-rc4-16-obj/x86_64/xen/scripts/Makefile.xen: /Permission denied /usr/src/linux-2.6.36-rc4-16/scripts/basic/fixdep.c:398:1: fatal error: opening /dependency file scripts/basic/.fixdep.d: Permission denied compilation terminated. make[4]: *** [scripts/basic/fixdep] Error 1 make[3]: *** [scripts_basic] Error 2 sh: line 14: [: too many arguments Probably a result of evaluating %kernel_module_package. Anyhow, it's broken. I still see that it went successfully with the previous factory kernel: (download.opensuse.org/factory/repo/oss/suse/x86_64/) [ ] xtables-addons-1.27-1.1.x86_64.rpm [ ] xtables-addons-1.30-1.1.x86_64.rpm [ ] xtables-addons-kmp-default-1.27_k2.6.34.0_12-1.1.x86_64.rpm [ ] xtables-addons-kmp-default-1.30_k2.6.36.0_rc4_16-1.1.x86_64.rpm [ ] xtables-addons-kmp-desktop-1.27_k2.6.34.0_12-1.1.x86_64.rpm [ ] xtables-addons-kmp-desktop-1.30_k2.6.36.0_rc4_16-1.1.x86_64.rpm [ ] xtables-addons-kmp-xen-1.27_k2.6.34.0_12-1.1.x86_64.rpm Jan -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-kernel+help(a)opensuse.org

1 0

[opensuse-kernel] query about module check-for-config-changes .config.orig .config
by doiggl＠velocitynet.com.au 05 Oct '10

05 Oct '10

Hello, After the 'check-for-config-changes .config.orig .config' has been run It generates a list of changes there seems to be diferent categories of changes I included a small example below, for full list see [1] check-for-config-change details at [2] small sample results from # check-for-config-changes .config.orig .config follow Changes after running `make oldconfig': +# CONFIG_8139TOO_TUNE_TWISTER is not set +# CONFIG_8139_OLD_RX_RESET is not set +# CONFIG_9P_FSCACHE is not set +# CONFIG_AB8500_CORE is not set +# CONFIG_ABX500_CORE is not set . . +CONFIG_8139TOO_PIO=y -CONFIG_ACPI_CUSTOM_DSDT_FILE="" -CONFIG_ADIS16209=m -CONFIG_ADIS16400=m +CONFIG_AIC79XX_DEBUG_ENABLE=y +CONFIG_AIC7XXX_DEBUG_ENABLE=y +CONFIG_AIC94XX_DEBUG=y -CONFIG_ASUS_OLED=m +CONFIG_B43LEGACY_DEBUG=y . . -CONFIG_TI_ST=m -CONFIG_TRANZPORT=m +CONFIG_USB_DEVICE_CLASS=y -CONFIG_USB_IP_COMMON=m -CONFIG_USB_IP_HOST=m -CONFIG_USB_IP_VHCI_HCD=m . -CONFIG_WLAGS49_H25=m -CONFIG_WLAGS49_H2=m +CONFIG_X86_VERBOSE_BOOTUP=y Questions ========= - In each case should I extract the following changes and add it to the existing .config then rerun ' check-for-config-changes .config.orig .config' again ? Script I used to do the changes and sample output ================================================= # /bin/cat results.txt | grep -i "+# " | /usr/bin/sed -e 's/+# //g' | /usr/bin/sed -e 's/ is not set/=n/g' CONFIG_8139TOO_TUNE_TWISTER=n CONFIG_8139_OLD_RX_RESET=n CONFIG_9P_FSCACHE=n CONFIG_AB8500_CORE=n # /bin/cat results.txt | grep -v "+# "| grep -i "+" |sed -e 's/+//g' CONFIG_8139TOO_PIO=y CONFIG_AIC79XX_DEBUG_ENABLE=y CONFIG_AIC7XXX_DEBUG_ENABLE=y CONFIG_AIC94XX_DEBUG=y CONFIG_B43LEGACY_DEBUG=y CONFIG_CALGARY_IOMMU_ENABLED_BY_DEFAULT=y CONFIG_CC_OPTIMIZE_FOR_SIZE=y - Do I need to do anything with the entries with a minus sign '-' at the start ? Thanks for your help. Glenn [1] Full listing https://build.opensuse.org/package/view_file?file=zmake-oldconfig-results.t… [2] script content #! /bin/bash # lines 4 contains a timestamp... differences="$( diff -bU0 <(sed -e '/^# .* is not set$/p' -e '/^$\|^#/d' "$1" | sort) \ <(sed -e '/^# .* is not set$/p' -e '/^$\|^#/d' "$2" | sort) \ | grep '^[-+][^-+]' )" || true if [ -n "$differences" ]; then echo echo "Changes after running \`make oldconfig':" echo "$differences" echo if echo "$differences" | grep -q '^+' ; then exit 1 fi fi -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-kernel+help(a)opensuse.org

1 0

[opensuse-kernel] kernel-debuginfo packages for Open Suse 11.3
by Alok Kataria 04 Oct '10

04 Oct '10

Hi, I am looking for the debuginfo packages for the open suse11.3 kernel, specifically the 2.6.34-12-desktop kernel. The kotd site has debuginfo packages for the KOTD at http://ftp.suse.com/pub/projects/kernel/kotd/openSUSE-11.3/x86_64/ is there a similar repository where the debuginfo package exists for all the released kernels ? I have a crash compliant core file for a panic with the opensuse 11.3 desktop kernel and was trying to use the crash utility to debug this. Please note that the vmlinux file that is available from the kernel-desktop-2.6.34-12.3.x86_64 rpm is not useful as it lack debug symbols. Thanks, Alok -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-kernel+help(a)opensuse.org

2 3